LAURION Reports Multiple Gold and Polymetallic Intercepts, Including 9.90 m Grading 0.563 g/t Au and 4.55 m Grading 0.76% Cu and 12.29 g/t Ag, Including 1.70 m Grading 1.56% Cu and 24.45 g/t Ag at Ishk?day
Original announcement by orestocks on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME.V
- Exchange
- Unavailable
- Region
- Northwestern Ontario
- Primary commodity
- Gold
- Secondary commodities
- Copper, Silver, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-23 12:21:25 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration reports significant gold and polymetallic drill intercepts from its Ishkōday Project in Northwestern Ontario. Highlights include 9.90 m grading 0.563 g/t Au and 4.55 m grading 0.76% Cu and 12.29 g/t Ag, with sub-intervals showing bonanza silver and strong copper grades. The Phase 1 drill program, which has been expanded, aims to advance the A-Zone towards a potential maiden Mineral Resource Estimate, with new deeper gold-bearing intervals providing further exploration upside.
Reasoning: The document reports multiple significant gold and polymetallic drill intercepts, including high-grade copper and silver, from the Ishkōday project. The discovery of unexpected deeper gold mineralization in LBX26-110 adds significant exploration upside. The drill program is systematically advancing towards a maiden MRE, and robust QA/QC procedures are in place. While true widths are not yet determined, the overall results are positive and indicate strong potential.
Positive factors
- High-grade gold and polymetallic intercepts, including bonanza silver and strong copper grades
- Discovery of unexpected deeper gold-bearing intervals, indicating potential for new zones
- Systematic drill program designed to advance towards a maiden MRE, with increased planned metres
- Comprehensive QA/QC protocols disclosed, including certified lab and QP sign-off
Negative factors
- True widths not yet determined, potentially overstating intercept lengths
- Some intercepts are narrow, which may impact economic viability
Facts used in scoring: 87
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, mentioning a certified lab (ALS), QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“The technical contents of this press release have been reviewed and approved by Dr. Trevor Boyd, Ph.D., P.Geo., a consultant to LAURION and a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure of Mineral Projects(“NI 43-101”). Dr. Boyd is independent of the Company within the meaning of NI 43-101. Sampling and QA/QC Protocols All drill core is transported and stored inside the core logging facility located at the Ishkōday Project in Greenstone, Ontario. LAURION employs an industry standard system of external standards, blanks and duplicates for all of its sampling, in addition to the QA/QC protocol employed by the laboratory. After logging, core samples were identified and then cut in half along the core axis in the same building and then zip tied individually in plastic sample bags with a bar code. Approximately five or six of these individual bags were then stacked into a “rice” white material bag and stored on a skid for final shipment to the laboratory. All core samples were shipped to the ALS facility in Thunder Bay, Ontario, which were then prepared by ALS Global Geochemistry in Thunder Bay and analyzed by ALS Global Analytical Lab in North Vancouver, British Columbia. Samples are processed by 4-acid digestion and analyzed by fire assay on 50 g pulps and ICP-AES (Inductively Coupled Plasma – Atomic Emission Spectroscopy). Over limit analyses are reprocessed with gravimetric finish. A total of 5% blanks and 5% standards are inserted randomly within all samples. 5% of the best assay result pulps were sent for re-assays. All QA/QC results were verified, and no contamination or bias was observed. The remaining half of the core, as well as the unsampled core, is stored in temporary core racks at the core logging facility in Beardmore before being moved to the core storage facility at the Ishkōday Project. Note:QA/QC review of standards and duplicates indicates analytical results are reliable. One zinc standard adjacent to a high-grade zinc interval returned elevated values consistent with expected analytical behaviour following high-grade samples.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'All Core lengths are drilled thicknesses; true widths have not yet been determined.'
Evidence · text
“Note: All Core lengths are drilled thicknesses; true widths have not yet been determined.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill program is described as 'targeted infill, expansion and exploration drilling' to advance the A-Zone.
Evidence · text
“Through targeted infill, expansion and exploration drilling, LAURION’s 2026 Phase 1 drill program is designed to systematically advance the A-Zone”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: LBX26-109 was designed to test along strike to the northeast of high-grade gold intercepts, and LBX26-110 encountered unexpected deeper intervals, providing new geological information for potential follow-up.
Evidence · text
“LBX26-109 was designed to test an isolated chargeability anomaly in the footwall of the River Shear, while also testing along strike to the northeast of high-grade gold intercepts reported in historic drill holes 88-22 and K-56. ... These deeper intervals were unexpected and provide new geological information for potential follow-up evaluation in the future.”
Extracted facts
Stored fact records: 87. Some facts used in scoring do not have a stored record.
Drill Results (87)
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.67Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.67
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 17.9 m
- To
- 19.1 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-19.1
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is moderate grade over a narrow width, slightly above the project's average gold grade but not exceptional. It contributes to the overall understanding of the mineralization.
Negative factors
- Narrow intercept length
- True width not determined
Evidence · table
“0.670”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 1.52Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 17.9 m
- To
- 19.1 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-19.1
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is low grade over a narrow width, below the project's average silver grade, and not particularly material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“1.52”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.04Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 17.9 m
- To
- 19.1 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-19.1
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept is low grade over a narrow width, below the project's average copper grade, and not particularly material.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.04”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.87Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 17.9 m
- To
- 19.1 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-19.1
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is moderate grade over a narrow width, below the project's average zinc grade, but still contributes to polymetallic potential.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.87”
Context: 1.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.156Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.156
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 17.9 m
- To
- 18.4 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-18.4
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows low gold grade over a very narrow width, which is not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.156”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 3.3Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 17.9 m
- To
- 18.4 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-18.4
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows low silver grade over a very narrow width, which is not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“3.30”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.07Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 17.9 m
- To
- 18.4 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-18.4
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows low copper grade over a very narrow width, which is not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.07”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 1.61Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.61
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 17.9 m
- To
- 18.4 m
- Intercept Depth
- 17.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:17.9-18.4
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a moderate zinc grade over a very narrow width, which is not highly material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is slightly above project average but still weak
Evidence · table
“1.61”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.144Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.144
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 26.2 m
- To
- 26.7 m
- Intercept Depth
- 26.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:26.2-26.7
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.144”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 14.3Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 14.3
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 26.2 m
- To
- 26.7 m
- Intercept Depth
- 26.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:26.2-26.7
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is moderate grade over a very narrow width, contributing to polymetallic potential but not highly material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is slightly above project average but still weak
Evidence · table
“14.30”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.13Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 26.2 m
- To
- 26.7 m
- Intercept Depth
- 26.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:26.2-26.7
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept is low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.13”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 26.2 m
- To
- 26.7 m
- Intercept Depth
- 26.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:26.2-26.7
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.03”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.284Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.284
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 236.65 m
- To
- 237.2 m
- Intercept Depth
- 236.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:236.65-237.2
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.284”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.25Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 236.65 m
- To
- 237.2 m
- Intercept Depth
- 236.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:236.65-237.2
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is very low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.25”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-109providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.03Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-109
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 236.65 m
- To
- 237.2 m
- Intercept Depth
- 236.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-109:236.65-237.2
- Mining Method
- unknown
Location
- Easting
- 446084
- Northing
- 5513178
- Elevation
- 321 m
- Azimuth
- 317 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.03”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 1.26Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 12.9 m
- To
- 13.7 m
- Intercept Depth
- 12.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:12.9-13.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept shows a good grade over a narrow width, exceeding the project's average gold grade, which is a positive indicator.
Positive factors
- Grade is above project average
Negative factors
- Narrow intercept length
- True width not determined
Evidence · table
“1.260”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.7Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 12.9 m
- To
- 13.7 m
- Intercept Depth
- 12.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:12.9-13.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.70”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 12.9 m
- To
- 13.7 m
- Intercept Depth
- 12.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:12.9-13.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 12.9 m
- To
- 13.7 m
- Intercept Depth
- 12.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:12.9-13.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.414Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.414
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 25.8 m
- To
- 26.5 m
- Intercept Depth
- 25.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:25.8-26.5
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is moderate grade over a narrow width, below the project's average gold grade, and not highly material.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.414”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.5Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 25.8 m
- To
- 26.5 m
- Intercept Depth
- 25.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:25.8-26.5
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.50”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.02Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 25.8 m
- To
- 26.5 m
- Intercept Depth
- 25.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:25.8-26.5
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.02”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 25.8 m
- To
- 26.5 m
- Intercept Depth
- 25.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:25.8-26.5
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.272Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.272
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 29.6 m
- To
- 32.4 m
- Intercept Depth
- 29.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:29.6-32.4
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is moderate grade over a narrow width, below the project's average gold grade, and not highly material.
Negative factors
- True width not determined
- Grade is below project average
Evidence · table
“0.272”
Context: 2.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.91Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.91
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 29.6 m
- To
- 32.4 m
- Intercept Depth
- 29.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:29.6-32.4
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is very low grade over a narrow width, not material on its own.
Negative factors
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.91”
Context: 2.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 29.6 m
- To
- 32.4 m
- Intercept Depth
- 29.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:29.6-32.4
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept is very low grade over a narrow width, not material on its own.
Negative factors
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 2.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 29.6 m
- To
- 32.4 m
- Intercept Depth
- 29.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:29.6-32.4
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a narrow width, not material on its own.
Negative factors
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 2.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.658Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.658
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 31.3 m
- To
- 31.8 m
- Intercept Depth
- 31.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:31.3-31.8
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a very narrow width, exceeding the project's average gold grade.
Positive factors
- Grade is above project average
Negative factors
- Very narrow intercept length
- True width not determined
Evidence · table
“0.658”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 31.3 m
- To
- 31.8 m
- Intercept Depth
- 31.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:31.3-31.8
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows very low silver grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.60”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 31.3 m
- To
- 31.8 m
- Intercept Depth
- 31.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:31.3-31.8
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows very low zinc grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.072Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.072
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 37.3 m
- To
- 41.7 m
- Intercept Depth
- 37.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:37.3-41.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Low gold grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.072”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 2.35Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.35
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 37.3 m
- To
- 41.7 m
- Intercept Depth
- 37.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:37.3-41.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Low silver grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“2.35”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.45Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 37.3 m
- To
- 41.7 m
- Intercept Depth
- 37.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:37.3-41.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept shows a moderate grade over a moderate width, exceeding the project's average copper grade, which is a positive indicator.
Positive factors
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“0.45”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.02Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 37.3 m
- To
- 41.7 m
- Intercept Depth
- 37.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:37.3-41.7
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.02”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.149Grade Unit: g/tIntercept: 1.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.149
- Grade Unit
- g/t
- Intercept
- 1.55 m
- From
- 39.55 m
- To
- 41.1 m
- Intercept Depth
- 39.55 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:39.55-41.1
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low gold grade over a narrow width, not material on its own.
Negative factors
- Low gold grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.149”
Context: 1.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 4.86Grade Unit: g/tIntercept: 1.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 4.86
- Grade Unit
- g/t
- Intercept
- 1.55 m
- From
- 39.55 m
- To
- 41.1 m
- Intercept Depth
- 39.55 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:39.55-41.1
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a narrow width, not material on its own.
Negative factors
- Low silver grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“4.86”
Context: 1.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.87Grade Unit: %Intercept: 1.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 1.55 m
- From
- 39.55 m
- To
- 41.1 m
- Intercept Depth
- 39.55 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:39.55-41.1
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade over a narrow width, exceeding the project's average copper grade, which is a positive indicator.
Positive factors
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“0.87”
Context: 1.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 1.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.55 m
- From
- 39.55 m
- To
- 41.1 m
- Intercept Depth
- 39.55 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:39.55-41.1
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low zinc grade over a narrow width, not material on its own.
Negative factors
- Low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 1.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.201Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.201
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 40.05 m
- To
- 40.6 m
- Intercept Depth
- 40.05 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:40.05-40.6
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.201”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 7.8Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 7.8
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 40.05 m
- To
- 40.6 m
- Intercept Depth
- 40.05 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:40.05-40.6
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“7.80”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 1.57Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.57
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 40.05 m
- To
- 40.6 m
- Intercept Depth
- 40.05 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:40.05-40.6
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade over a very narrow width, significantly exceeding the project's average copper grade, which is a positive indicator despite the narrowness.
Positive factors
- Strong copper grade
- Grade is above project average
Negative factors
- Very narrow intercept length
- True width not determined
Evidence · table
“1.57”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 40.05 m
- To
- 40.6 m
- Intercept Depth
- 40.05 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:40.05-40.6
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low zinc grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.063Grade Unit: g/tIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.063
- Grade Unit
- g/t
- Intercept
- 4.55 m
- From
- 80.45 m
- To
- 85 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-85
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Low gold grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.063”
Context: 4.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 12.29Grade Unit: g/tIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 12.29
- Grade Unit
- g/t
- Intercept
- 4.55 m
- From
- 80.45 m
- To
- 85 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-85
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept shows a moderate grade over a moderate width, exceeding the project's average silver grade, which is a positive indicator.
Positive factors
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“12.29”
Context: 4.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.76Grade Unit: %Intercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 4.55 m
- From
- 80.45 m
- To
- 85 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-85
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept shows a strong grade over a moderate width, significantly exceeding the project's average copper grade, which is a positive indicator.
Positive factors
- Strong copper grade
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“0.76”
Context: 4.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.16Grade Unit: %Intercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 4.55 m
- From
- 80.45 m
- To
- 85 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-85
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.16”
Context: 4.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.138Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.138
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 80.45 m
- To
- 82.15 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low gold grade over a narrow width, not material on its own.
Negative factors
- Low gold grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.138”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 24.45Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 24.45
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 80.45 m
- To
- 82.15 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade over a narrow width, significantly exceeding the project's average silver grade, which is a positive indicator.
Positive factors
- Strong silver grade
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“24.45”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 1.56Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.56
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 80.45 m
- To
- 82.15 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade over a narrow width, significantly exceeding the project's average copper grade, which is a positive indicator.
Positive factors
- Strong copper grade
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“1.56”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.31Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 80.45 m
- To
- 82.15 m
- Intercept Depth
- 80.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:80.45-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a narrow width, not material on its own.
Negative factors
- Low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.31”
Context: 1.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.183Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.183
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 81.15 m
- To
- 82.15 m
- Intercept Depth
- 81.15 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:81.15-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.183”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 32.05Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 32.05
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 81.15 m
- To
- 82.15 m
- Intercept Depth
- 81.15 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:81.15-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade over a narrow width, significantly exceeding the project's average silver grade, which is a positive indicator.
Positive factors
- Strong silver grade
- Grade is above project average
Negative factors
- Narrow intercept length
- True width not determined
Evidence · table
“32.05”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 2.16Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 2.16
- Grade Unit
- %
- Intercept
- 1 m
- From
- 81.15 m
- To
- 82.15 m
- Intercept Depth
- 81.15 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:81.15-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional copper grade over a narrow width, significantly exceeding the project's average copper grade, which is a very positive indicator.
Positive factors
- Exceptional copper grade
- Grade is above project average
Negative factors
- Narrow intercept length
- True width not determined
Evidence · table
“2.16”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.45Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 1 m
- From
- 81.15 m
- To
- 82.15 m
- Intercept Depth
- 81.15 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:81.15-82.15
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a narrow width, not material on its own.
Negative factors
- Low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.45”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.018Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.018
- Grade Unit
- g/t
- Intercept
- 1.45 m
- From
- 165.5 m
- To
- 166.95 m
- Intercept Depth
- 165.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:165.5-166.95
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low gold grade over a narrow width, which is not material.
Negative factors
- Very low gold grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.018”
Context: 1.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 1.15Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 1.45 m
- From
- 165.5 m
- To
- 166.95 m
- Intercept Depth
- 165.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:165.5-166.95
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a narrow width, which is not material.
Negative factors
- Very low silver grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“1.15”
Context: 1.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.12Grade Unit: %Intercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 1.45 m
- From
- 165.5 m
- To
- 166.95 m
- Intercept Depth
- 165.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:165.5-166.95
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade over a narrow width, not material on its own.
Negative factors
- Low copper grade
- True width not determined
- Grade is below project average
Evidence · table
“0.12”
Context: 1.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 1.72Grade Unit: %Intercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.72
- Grade Unit
- %
- Intercept
- 1.45 m
- From
- 165.5 m
- To
- 166.95 m
- Intercept Depth
- 165.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:165.5-166.95
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong zinc grade over a narrow width, exceeding the project's average zinc grade, which is a positive indicator.
Positive factors
- Strong zinc grade
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“1.72”
Context: 1.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.246Grade Unit: g/tIntercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.246
- Grade Unit
- g/t
- Intercept
- 3.7 m
- From
- 184.2 m
- To
- 187.9 m
- Intercept Depth
- 184.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:184.2-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is moderate grade over a narrow width, below the project's average gold grade, and not highly material.
Negative factors
- True width not determined
- Grade is below project average
Evidence · table
“0.246”
Context: 3.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 8.04Grade Unit: g/tIntercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 8.04
- Grade Unit
- g/t
- Intercept
- 3.7 m
- From
- 184.2 m
- To
- 187.9 m
- Intercept Depth
- 184.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:184.2-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is moderate grade over a narrow width, below the project's average silver grade, and not highly material.
Negative factors
- True width not determined
- Grade is below project average
Evidence · table
“8.04”
Context: 3.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.6Grade Unit: %Intercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 3.7 m
- From
- 184.2 m
- To
- 187.9 m
- Intercept Depth
- 184.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:184.2-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept shows a strong grade over a narrow width, exceeding the project's average copper grade, which is a positive indicator.
Positive factors
- Strong copper grade
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“0.60”
Context: 3.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 1.08Grade Unit: %Intercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.08
- Grade Unit
- %
- Intercept
- 3.7 m
- From
- 184.2 m
- To
- 187.9 m
- Intercept Depth
- 184.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:184.2-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is moderate grade over a narrow width, below the project's average zinc grade, but still contributes to polymetallic potential.
Negative factors
- True width not determined
- Grade is below project average
Evidence · table
“1.08”
Context: 3.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.427Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.427
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 186.9 m
- To
- 187.9 m
- Intercept Depth
- 186.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:186.9-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a narrow width, below the project's average gold grade, and not highly material.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.427”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 17.15Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 17.15
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 186.9 m
- To
- 187.9 m
- Intercept Depth
- 186.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:186.9-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade over a narrow width, exceeding the project's average silver grade, which is a positive indicator.
Positive factors
- Strong silver grade
- Grade is above project average
Negative factors
- Narrow intercept length
- True width not determined
Evidence · table
“17.15”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 1.18Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.18
- Grade Unit
- %
- Intercept
- 1 m
- From
- 186.9 m
- To
- 187.9 m
- Intercept Depth
- 186.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:186.9-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade over a narrow width, significantly exceeding the project's average copper grade, which is a positive indicator.
Positive factors
- Strong copper grade
- Grade is above project average
Negative factors
- Narrow intercept length
- True width not determined
Evidence · table
“1.18”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 3.63Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 3.63
- Grade Unit
- %
- Intercept
- 1 m
- From
- 186.9 m
- To
- 187.9 m
- Intercept Depth
- 186.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:186.9-187.9
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong zinc grade over a narrow width, significantly exceeding the project's average zinc grade, which is a positive indicator.
Positive factors
- Strong zinc grade
- Grade is above project average
Negative factors
- Narrow intercept length
- True width not determined
Evidence · table
“3.63”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.141Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.141
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 197.65 m
- To
- 198.35 m
- Intercept Depth
- 197.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:197.65-198.35
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.141”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.25Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 197.65 m
- To
- 198.35 m
- Intercept Depth
- 197.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:197.65-198.35
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.25”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 197.65 m
- To
- 198.35 m
- Intercept Depth
- 197.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:197.65-198.35
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 197.65 m
- To
- 198.35 m
- Intercept Depth
- 197.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:197.65-198.35
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a narrow width, not material on its own.
Negative factors
- Narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.152Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.152
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 200.5 m
- To
- 201 m
- Intercept Depth
- 200.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:200.5-201
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.152”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 1.2Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 200.5 m
- To
- 201 m
- Intercept Depth
- 200.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:200.5-201
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is very low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“1.20”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.11Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 200.5 m
- To
- 201 m
- Intercept Depth
- 200.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:200.5-201
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept is low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.11”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.02Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 200.5 m
- To
- 201 m
- Intercept Depth
- 200.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:200.5-201
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.02”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.563Grade Unit: g/tIntercept: 9.9 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.563
- Grade Unit
- g/t
- Intercept
- 9.9 m
- From
- 205.7 m
- To
- 215.6 m
- Intercept Depth
- 205.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:205.7-215.6
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is significant due to its length and moderate grade, exceeding the project's average gold grade. The fact that it was unexpected adds to its novelty and potential for further exploration.
Positive factors
- Significant intercept length
- Moderate gold grade
- Grade is above project average
- Unexpected deeper interval, indicating new potential
Negative factors
- True width not determined
Evidence · table
“0.563”
Context: 9.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.31Grade Unit: g/tIntercept: 9.9 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 9.9 m
- From
- 205.7 m
- To
- 215.6 m
- Intercept Depth
- 205.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:205.7-215.6
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept shows a very low grade over a significant width, which is not material on its own.
Negative factors
- Very low silver grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.31”
Context: 9.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 9.9 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 9.9 m
- From
- 205.7 m
- To
- 215.6 m
- Intercept Depth
- 205.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:205.7-215.6
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept shows a very low grade over a significant width, which is not material on its own.
Negative factors
- Very low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 9.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 1.693Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 1.693
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 211.7 m
- To
- 214 m
- Intercept Depth
- 211.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:211.7-214
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, significantly exceeding the project's average gold grade, which is a positive indicator.
Positive factors
- Strong gold grade
- Grade is above project average
Negative factors
- True width not determined
Evidence · table
“1.693”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.43Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 211.7 m
- To
- 214 m
- Intercept Depth
- 211.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:211.7-214
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade over a narrow width, not material on its own.
Negative factors
- Very low silver grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.43”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2.3 m
- From
- 211.7 m
- To
- 214 m
- Intercept Depth
- 211.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:211.7-214
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This sub-interval shows a very low zinc grade over a narrow width, not material on its own.
Negative factors
- Very low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.37Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 230.4 m
- To
- 231 m
- Intercept Depth
- 230.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:230.4-231
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is moderate grade over a very narrow width, below the project's average gold grade, and not highly material.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is below project average
Evidence · table
“0.370”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.25Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 230.4 m
- To
- 231 m
- Intercept Depth
- 230.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:230.4-231
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept is very low grade over a very narrow width, not material on its own.
Negative factors
- Very narrow intercept length
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.25”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 230.4 m
- To
- 231 m
- Intercept Depth
- 230.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:230.4-231
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept is very low grade over a very narrow width, not material on its own.
Negative factors
- Very low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · goldGrade: 0.21Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 238 m
- To
- 244 m
- Intercept Depth
- 238 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:238-244
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This gold intercept is notable for its moderate length and being an unexpected deeper interval, suggesting new exploration potential, despite the low gold grade.
Positive factors
- Moderate intercept length
- Unexpected deeper interval, indicating new potential
Negative factors
- Low gold grade
- True width not determined
- Grade is below project average
Evidence · table
“0.210”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · silverGrade: 0.25Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 238 m
- To
- 244 m
- Intercept Depth
- 238 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:238-244
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This silver intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Very low silver grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.25”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · copperGrade: 0.01Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6 m
- From
- 238 m
- To
- 244 m
- Intercept Depth
- 238 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:238-244
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This copper intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Very low copper grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
LBX26-110providing additional geological information from comparatively underexplored areas of the mineralized · zincGrade: 0.01Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- LBX26-110
- Project
- providing additional geological information from comparatively underexplored areas of the mineralized
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME.V
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6 m
- From
- 238 m
- To
- 244 m
- Intercept Depth
- 238 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- LBX26-110:238-244
- Mining Method
- unknown
Location
- Easting
- 446106
- Northing
- 5513334
- Elevation
- 322 m
- Azimuth
- 328 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-23T00:00:00.000Z
Reasoning: This zinc intercept shows a very low grade over a moderate width, which is not material on its own.
Negative factors
- Very low zinc grade
- True width not determined
- Grade is significantly below project average
Evidence · table
“0.01”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.