LAURION Reports Wide Mineralized Zones and High-Grade Polymetallic Intercepts from LBX25-097 and LBX25-100, Advancing Structural Continuity at Ishkoday
Original announcement by tmx on
- Company
- LAURION Mineral Exploration Inc.
- Ticker
- LME
- Exchange
- TSX
- Region
- north-western Ontario
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-12 11:13:56 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
LAURION Mineral Exploration reported high-grade polymetallic drill intercepts from holes LBX25-097 and LBX25-100 at its Ishkoday Project in north-western Ontario. The infill drilling program successfully confirmed structural continuity and improved geological confidence within the A-Zone. Notable results include 0.90 m at 4.35 g/t Au, 21.20 g/t Ag, 0.11% Cu, and 4.22% Zn in LBX25-097, and 0.50 m at 0.937 g/t Au, 14.90 g/t Ag, 0.11% Cu, and 4.33% Zn in LBX25-100.
Reasoning: The drill results confirm structural continuity and deliver high-grade polymetallic intercepts, advancing the understanding of the Ishkoday project. While true widths are not yet known, the infill drilling successfully met its objective of improving geological confidence with robust QA/QC.
Positive factors
- High-grade polymetallic intercepts, particularly gold and zinc, confirm structural continuity within the A-Zone.
- Infill drilling successfully improved geological confidence and refined understanding of mineralization.
- Comprehensive QA/QC protocols, including certified labs and QP sign-off, ensure data reliability.
Negative factors
- True widths of mineralized zones are not yet known, which may overstate apparent lengths.
- No cut-off grade or internal dilution rules were disclosed for compositing intervals.
Facts used in scoring: 122
Extracted facts
Stored fact records: 122. Some facts used in scoring do not have a stored record.
Drill Results (122)
LBX25-097Ishkoday · goldGrade: 0.025Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.025
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade, but contributes to the overall understanding of the mineralized envelope.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.025”
Context: 6.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 1.45Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.45
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade, but contributes to the overall understanding of the mineralized envelope.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“1.45”
Context: 6.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.01Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade, but contributes to the overall understanding of the mineralized envelope.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.01”
Context: 6.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.26Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 34.5 m
- To
- 41 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-41
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade, but contributes to the overall understanding of the mineralized envelope.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.26”
Context: 6.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.037Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.037
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-35.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade, but is part of a broader mineralized zone.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.037”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 3.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-35.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade, but is part of a broader mineralized zone.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“3.30”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.02Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-35.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade, but is part of a broader mineralized zone.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.02”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.76Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 1 m
- From
- 34.5 m
- To
- 35.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 34.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:34.5-35.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade, but is part of a broader mineralized zone.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.76”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.802Grade Unit: g/tIntercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.802
- Grade Unit
- g/t
- Intercept
- 0.65 m
- From
- 52.6 m
- To
- 53.25 m
- Hole Depth
- 237 m
- Intercept Depth
- 52.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:52.6-53.25
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Moderate gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.802”
Context: 0.65
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 0.8Grade Unit: g/tIntercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 0.65 m
- From
- 52.6 m
- To
- 53.25 m
- Hole Depth
- 237 m
- Intercept Depth
- 52.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:52.6-53.25
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“0.80”
Context: 0.65
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.02Grade Unit: %Intercept: 0.65 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.65 m
- From
- 52.6 m
- To
- 53.25 m
- Hole Depth
- 237 m
- Intercept Depth
- 52.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:52.6-53.25
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.02”
Context: 0.65
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.127Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.127
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 55 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:55-55.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low gold grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.127”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 2.8Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 55 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:55-55.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“2.80”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.04Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 55 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:55-55.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.04”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.97Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.97
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 55 m
- To
- 55.5 m
- Hole Depth
- 237 m
- Intercept Depth
- 55 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:55-55.5
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.97”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.454Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.454
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 64.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Weak gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.454”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 1.5Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 64.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“1.50”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.05Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 64.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.05”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.47Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 64.5 m
- To
- 65.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 64.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:64.5-65.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.47”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.437Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.437
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 66.8 m
- To
- 67.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 66.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:66.8-67.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Weak gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.437”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 42.1Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 42.1
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 66.8 m
- To
- 67.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 66.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:66.8-67.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak silver grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Weak silver grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“42.10”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.04Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 66.8 m
- To
- 67.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 66.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:66.8-67.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.04”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.777Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.777
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
- Hole Depth
- 237 m
- Intercept Depth
- 76.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Weak gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.777”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 2.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
- Hole Depth
- 237 m
- Intercept Depth
- 76.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“2.10”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.03Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
- Hole Depth
- 237 m
- Intercept Depth
- 76.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.03”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.4Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 76.5 m
- To
- 77 m
- Hole Depth
- 237 m
- Intercept Depth
- 76.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:76.5-77
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.40”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.617Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.617
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a moderate width, indicating a significant mineralized zone.
Positive factors
- Moderate intercept length with a weak gold grade.
- Part of a broader mineralized envelope.
Evidence · table
“0.617”
Context: 15.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 2.87Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.87
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a moderate width, indicating a significant mineralized zone.
Positive factors
- Moderate intercept length with a low silver grade.
- Part of a broader mineralized envelope.
Evidence · table
“2.87”
Context: 15.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.03Grade Unit: %Intercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a moderate width, indicating a significant mineralized zone.
Positive factors
- Moderate intercept length with a low copper grade.
- Part of a broader mineralized envelope.
Evidence · table
“0.03”
Context: 15.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.48Grade Unit: %Intercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.48
- Grade Unit
- %
- Intercept
- 15.5 m
- From
- 135.5 m
- To
- 151 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-151
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a moderate width, indicating a significant mineralized zone.
Positive factors
- Moderate intercept length with a low zinc grade.
- Part of a broader mineralized envelope.
Evidence · table
“0.48”
Context: 15.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.732Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.732
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-143.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a good width, contributing to the overall mineralized zone.
Positive factors
- Weak gold grade over a good intercept length.
Evidence · table
“0.732”
Context: 7.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 4.76Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.76
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-143.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a good width, contributing to the overall mineralized zone.
Positive factors
- Low silver grade over a good intercept length.
Evidence · table
“4.76”
Context: 7.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.04Grade Unit: %Intercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-143.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade over a good width, contributing to the overall mineralized zone.
Positive factors
- Low copper grade over a good intercept length.
Evidence · table
“0.04”
Context: 7.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.78Grade Unit: %Intercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 7.7 m
- From
- 135.5 m
- To
- 143.2 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-143.2
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a good width, contributing to the overall mineralized zone.
Positive factors
- Low zinc grade over a good intercept length.
Evidence · table
“0.78”
Context: 7.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 4.35Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.35
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-136.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a narrow width, significantly contributing to the overall value of the mineralized zone.
Positive factors
- Exceptional gold grade for the reported interval.
- Polymetallic nature with high zinc and silver grades.
Negative factors
- Narrow intercept length.
Evidence · table
“4.350”
Context: 0.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 21.2Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 21.2
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-136.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a good silver grade over a narrow width, significantly contributing to the overall value of the mineralized zone.
Positive factors
- Good silver grade for the reported interval.
- Polymetallic nature with high gold and zinc grades.
Negative factors
- Narrow intercept length.
Evidence · table
“21.20”
Context: 0.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.11Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-136.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, but is part of a significant high-grade polymetallic zone.
Positive factors
- Low copper grade, but part of a high-grade polymetallic intercept.
Negative factors
- Narrow intercept length.
Evidence · table
“0.11”
Context: 0.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 4.22Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.22
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 135.5 m
- To
- 136.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:135.5-136.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak zinc grade over a narrow width, significantly contributing to the overall value of the mineralized zone.
Positive factors
- Weak zinc grade for the reported interval.
- Polymetallic nature with high gold and silver grades.
Negative factors
- Narrow intercept length.
Evidence · table
“4.22”
Context: 0.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 1.445Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.445
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 148.9 m
- To
- 149.9 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:148.9-149.9
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a narrow width, contributing to the overall mineralized zone.
Positive factors
- Weak gold grade for the reported interval.
Evidence · table
“1.445”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 0.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 148.9 m
- To
- 149.9 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:148.9-149.9
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“0.60”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 148.9 m
- To
- 149.9 m
- Hole Depth
- 237 m
- Intercept Depth
- 135.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:148.9-149.9
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.03”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 1.1Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
- Hole Depth
- 237 m
- Intercept Depth
- 158.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Moderate gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“1.100”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 3.3Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
- Hole Depth
- 237 m
- Intercept Depth
- 158.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“3.30”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.08Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
- Hole Depth
- 237 m
- Intercept Depth
- 158.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.08”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.96Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.96
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 158.75 m
- To
- 159.25 m
- Hole Depth
- 237 m
- Intercept Depth
- 158.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:158.75-159.25
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.96”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.278Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.278
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 170.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low gold grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.278”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 2.2Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 170.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“2.20”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · copperGrade: 0.05Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 170.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.05”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.64Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 170.9 m
- To
- 171.4 m
- Hole Depth
- 237 m
- Intercept Depth
- 170.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:170.9-171.4
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.64”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · goldGrade: 0.786Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.786
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 172.4 m
- To
- 173 m
- Hole Depth
- 237 m
- Intercept Depth
- 172.4 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:172.4-173
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Weak gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.786”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · silverGrade: 0.6Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 172.4 m
- To
- 173 m
- Hole Depth
- 237 m
- Intercept Depth
- 172.4 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:172.4-173
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.60”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-097Ishkoday · zincGrade: 0.03Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-097
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 172.4 m
- To
- 173 m
- Hole Depth
- 237 m
- Intercept Depth
- 172.4 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-097:172.4-173
- Mining Method
- unknown
Location
- Easting
- 446537
- Northing
- 5513245
- Elevation
- 323 m
- Azimuth
- 128 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.03”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.407Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.407
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 22.8 m
- To
- 23.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 22.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:22.8-23.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Weak gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.407”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 0.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 22.8 m
- To
- 23.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 22.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:22.8-23.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.50”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.02Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 22.8 m
- To
- 23.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 22.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:22.8-23.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.02”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.575Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.575
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 26.5 m
- To
- 27.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 26.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:26.5-27.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Weak gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.575”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 0.25Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 26.5 m
- To
- 27.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 26.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:26.5-27.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.25”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.03Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 26.5 m
- To
- 27.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 26.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:26.5-27.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.03”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.109Grade Unit: g/tIntercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.109
- Grade Unit
- g/t
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:39-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a good width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Good intercept length.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.109”
Context: 9.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 0.85Grade Unit: g/tIntercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:39-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a good width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Good intercept length.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“0.85”
Context: 9.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.02Grade Unit: %Intercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:39-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a good width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Good intercept length.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.02”
Context: 9.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.19Grade Unit: %Intercept: 9.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 9.8 m
- From
- 39 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:39-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a good width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Good intercept length.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.19”
Context: 9.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.825Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.825
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:48.3-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a narrow width, contributing to the overall mineralized zone.
Positive factors
- Moderate gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“0.825”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 4.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:48.3-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“4.50”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.09Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:48.3-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.09”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.78Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 48.3 m
- To
- 48.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:48.3-48.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.78”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.295Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.295
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 67 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:67-69.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.295”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 0.96Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 67 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:67-69.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“0.96”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.04Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 67 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:67-69.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.04”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.04Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 67 m
- To
- 69.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 67 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:67-69.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.04”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.09Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.090”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 1.17Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.17
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“1.17”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.01Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.01”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.2Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 5 m
- From
- 87.5 m
- To
- 92.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-92.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.20”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.282Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.282
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.282”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 2.45Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.45
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“2.45”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.03Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.03”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.73Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 1 m
- From
- 87.5 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:87.5-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.73”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.27Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:88-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low gold grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.270”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 3.7Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.7
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:88-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“3.70”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.04Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:88-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.04”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 1.32Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.32
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 88 m
- To
- 88.5 m
- Hole Depth
- 300 m
- Intercept Depth
- 87.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:88-88.5
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“1.32”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.158Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.158
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
- Hole Depth
- 300 m
- Intercept Depth
- 96.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low gold grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.158”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 3.3Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
- Hole Depth
- 300 m
- Intercept Depth
- 96.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“3.30”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.03Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
- Hole Depth
- 300 m
- Intercept Depth
- 96.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.03”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.4Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 96.9 m
- To
- 97.7 m
- Hole Depth
- 300 m
- Intercept Depth
- 96.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:96.9-97.7
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.40”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.254Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.254
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 106.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low gold grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.254”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 7.1Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 7.1
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 106.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“7.10”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.05Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 106.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.05”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.75Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 106.5 m
- To
- 107.3 m
- Hole Depth
- 300 m
- Intercept Depth
- 106.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:106.5-107.3
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.75”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.102Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.102
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a strong width, indicating a significant mineralized zone.
Positive factors
- Strong intercept length.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.102”
Context: 20.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 0.81Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a strong width, indicating a significant mineralized zone.
Positive factors
- Strong intercept length.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“0.81”
Context: 20.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.01Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a strong width, indicating a significant mineralized zone.
Positive factors
- Strong intercept length.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.01”
Context: 20.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.22Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 20 m
- From
- 129.8 m
- To
- 149.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:129.8-149.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a strong width, indicating a significant mineralized zone.
Positive factors
- Strong intercept length.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.22”
Context: 20.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.937Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.937
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:130.6-131.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a narrow width, contributing to the overall mineralized zone.
Positive factors
- Moderate gold grade for the reported interval.
- Polymetallic nature with high silver and zinc grades.
Negative factors
- Narrow intercept length.
Evidence · table
“0.937”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 14.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 14.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:130.6-131.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a good silver grade over a narrow width, contributing to the overall mineralized zone.
Positive factors
- Good silver grade for the reported interval.
- Polymetallic nature with high gold and zinc grades.
Negative factors
- Narrow intercept length.
Evidence · table
“14.90”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.11Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:130.6-131.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade over a narrow width, but is part of a significant high-grade polymetallic zone.
Positive factors
- Low copper grade, but part of a high-grade polymetallic intercept.
Negative factors
- Narrow intercept length.
Evidence · table
“0.11”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 4.33Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 4.33
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 130.6 m
- To
- 131.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:130.6-131.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a weak zinc grade over a narrow width, contributing to the overall mineralized zone.
Positive factors
- Weak zinc grade for the reported interval.
- Polymetallic nature with high gold and silver grades.
Negative factors
- Narrow intercept length.
Evidence · table
“4.33”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.193Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.193
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:144.6-145.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low gold grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low gold grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.193”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 1.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:144.6-145.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“1.90”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.05Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:144.6-145.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low copper grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.05”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 1.14Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.14
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 144.6 m
- To
- 145.1 m
- Hole Depth
- 300 m
- Intercept Depth
- 129.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:144.6-145.1
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low zinc grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“1.14”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 1.135Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.135
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 169 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:169-169.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the understanding of localized mineralization.
Positive factors
- Moderate gold grade for the reported interval.
Negative factors
- Narrow intercept length.
Evidence · table
“1.135”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 2.5Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 169 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:169-169.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low silver grade for the reported interval.
- Narrow intercept length.
Evidence · table
“2.50”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.03Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 169 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:169-169.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low copper grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.03”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.7Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Hole Depth
- 300 m
- Intercept Depth
- 169 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:169-169.8
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a narrow width, contributing to the understanding of localized mineralization.
Negative factors
- Low zinc grade for the reported interval.
- Narrow intercept length.
Evidence · table
“0.70”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.13Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
- Hole Depth
- 300 m
- Intercept Depth
- 179 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:179-187
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low gold grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low gold grade for the reported interval.
Evidence · table
“0.130”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 2.16Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 2.16
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
- Hole Depth
- 300 m
- Intercept Depth
- 179 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:179-187
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low silver grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“2.16”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.05Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
- Hole Depth
- 300 m
- Intercept Depth
- 179 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:179-187
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low copper grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low copper grade for the reported interval.
Evidence · table
“0.05”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · zincGrade: 0.28Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 8 m
- From
- 179 m
- To
- 187 m
- Hole Depth
- 300 m
- Intercept Depth
- 179 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:179-187
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This intercept shows a low zinc grade over a moderate width, contributing to the overall understanding of the mineralized envelope.
Positive factors
- Moderate intercept length.
Negative factors
- Low zinc grade for the reported interval.
Evidence · table
“0.28”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · goldGrade: 0.403Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.403
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
- Hole Depth
- 300 m
- Intercept Depth
- 179 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:180-181.4
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a narrow width, contributing to the overall mineralized zone.
Positive factors
- Weak gold grade for the reported interval.
Evidence · table
“0.403”
Context: 1.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · silverGrade: 5.15Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 5.15
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
- Hole Depth
- 300 m
- Intercept Depth
- 179 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- LBX25-100:180-181.4
- Mining Method
- unknown
Location
- Easting
- 446494
- Northing
- 5513229
- Elevation
- 322.4 m
- Azimuth
- 130 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: This sub-interval shows a low silver grade over a narrow width, contributing to the overall mineralized zone.
Negative factors
- Low silver grade for the reported interval.
Evidence · table
“5.15”
Context: 1.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
LBX25-100Ishkoday · copperGrade: 0.11Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
- Intercept Depth
- 180 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:180-181.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.11 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · zincGrade: 0.36Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 180 m
- To
- 181.4 m
- Intercept Depth
- 180 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:180-181.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.36 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.36 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.36”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · goldGrade: 0.443Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.443
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
- Intercept Depth
- 183.7 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:183.7-184.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.443 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.443”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · silverGrade: 7Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 7
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
- Intercept Depth
- 183.7 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:183.7-184.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.9 g/t·m is below.
Negative factors
- 7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.00”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · copperGrade: 0.15Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
- Intercept Depth
- 183.7 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:183.7-184.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.15 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · zincGrade: 1.81Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 1.81
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 183.7 m
- To
- 184.4 m
- Intercept Depth
- 183.7 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:183.7-184.4
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 1.81 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 1.81 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.81”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · goldGrade: 0.929Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.929
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
- Intercept Depth
- 284.4 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.929 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.929”
Context: LBX25-100
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · silverGrade: 3.6Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
- Intercept Depth
- 284.4 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 3.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.2 g/t·m is below.
Negative factors
- 3.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.60”
Context: LBX25-100
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · copperGrade: 0.16Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
- Intercept Depth
- 284.4 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.16 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: LBX25-100
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
LBX25-100Ishkoday · zincGrade: 0.64Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- LBX25-100
- Project
- Ishkoday
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- LME
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 284.4 m
- To
- 285 m
- Intercept Depth
- 284.4 m
Classification
- Sample Type
- drill
- Group ID
- LBX25-100:284.4-285
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: Expanded from assay table. 0.64 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.64 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.64”
Context: LBX25-100
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.