LEADING EDGE MATERIALS' PROGRESS UPDATE ON ROMANIAN EXPLORATION PROJECT
Original announcement by tmx on
- Company
- Leading Edge Materials Corp.
- Ticker
- LEM
- Exchange
- TSX
- Region
- Romania
- Primary commodity
- Lead
- Secondary commodities
- Zinc, Copper, Nickel, Cobalt, Gold, Silver, Uranium
- Document categories
- Drill results
- Extracted
- 2026-09-18 07:05:39 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Leading Edge Materials announced progress from its 2025 exploration campaign in Romania, highlighting extensive polymetallic mineralization (lead, zinc, copper) identified through channel sampling in underground galleries. The results include multiple high-grade intercepts over significant widths, with some sub-intervals showing bonanza grades. The company emphasizes the potential for a large, interconnected mineralized system and confirms JORC-compliant reporting with comprehensive QA/QC procedures, though collar and downhole surveys are pending.
Reasoning: The company reported new high-grade polymetallic (lead, zinc, copper) channel sample intercepts from its Romanian project, with several wide zones and bonanza grades in sub-intervals, supported by JORC-compliant reporting and robust QA/QC procedures, indicating strong exploration potential despite the early stage of the project.
Positive factors
- High-grade polymetallic intercepts
- Wide mineralized zones
- JORC compliant reporting
- QP/CP sign-off
- Accredited laboratories
- Comprehensive QA/QC program
- Potential for large-scale mineralized system
Negative factors
- Early-stage exploration with channel sampling
- Collar and downhole surveys pending
- True width is estimated, not precisely measured
- No grade vs recovery analysis yet
Facts used in scoring: 47
Extracted facts
Stored fact records: 47. Some facts used in scoring do not have a stored record.
Drill Results (47)
G2_CH075_LWRomanian Exploration · leadGrade: 0.91Grade Unit: %Intercept: 15 mView all detailsHide details
Identity
- Hole ID
- G2_CH075_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.91
- Grade Unit
- %
- Intercept
- 15 m
- From
- 54 m
- To
- 69 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH075_LW:54-69
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 15.0m interval with 0.91% Pb is a good width and grade for early-stage exploration, indicating significant mineralization.
Positive factors
- Wide mineralized zone
- Good grade for lead
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH075_LW : 15.0m@ 0.91% Pb and 0.83% Zn from 54.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH075_LWRomanian Exploration · zincGrade: 0.83Grade Unit: %Intercept: 15 mView all detailsHide details
Identity
- Hole ID
- G2_CH075_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.83
- Grade Unit
- %
- Intercept
- 15 m
- From
- 54 m
- To
- 69 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH075_LW:54-69
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 15.0m interval with 0.83% Zn is a good width and grade for early-stage exploration, indicating significant mineralization.
Positive factors
- Wide mineralized zone
- Good grade for zinc
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH075_LW : 15.0m@ 0.91% Pb and 0.83% Zn from 54.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH075_LWRomanian Exploration · leadGrade: 1.76Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH075_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.76
- Grade Unit
- %
- Intercept
- 6 m
- From
- 60 m
- To
- 66 m
- Intercept Depth
- 60 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH075_LW:60-66
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 1.76% Pb represents a significant high-grade zone within the broader mineralization, enhancing the overall prospectivity.
Positive factors
- High-grade sub-interval
- Good width for high grade
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 1.76% Pb and 1.56% Zn from 60.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.76% Pb is strong for lead, especially within a 6.0m interval.
Evidence · text
“1.76% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH075_LWRomanian Exploration · zincGrade: 1.56Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH075_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.56
- Grade Unit
- %
- Intercept
- 6 m
- From
- 60 m
- To
- 66 m
- Intercept Depth
- 60 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH075_LW:60-66
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 1.56% Zn represents a significant high-grade zone within the broader mineralization, enhancing the overall prospectivity.
Positive factors
- High-grade sub-interval
- Good width for high grade
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 1.76% Pb and 1.56% Zn from 60.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.56% Zn is strong for zinc, especially within a 6.0m interval.
Evidence · text
“1.56% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH076_RWRomanian Exploration · leadGrade: 1.92Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- G2_CH076_RW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.92
- Grade Unit
- %
- Intercept
- 9 m
- From
- 68 m
- To
- 77 m
- Intercept Depth
- 68 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH076_RW:68-77
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 9.0m interval with 1.92% Pb is a strong result for early-stage exploration, indicating significant mineralization.
Positive factors
- High grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH076_RW : 9.0m@ 1.92% Pb and 2.06% Zn from 68.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.92% Pb is strong for lead, especially within a 9.0m interval.
Evidence · text
“1.92% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH076_RWRomanian Exploration · zincGrade: 2.06Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- G2_CH076_RW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.06
- Grade Unit
- %
- Intercept
- 9 m
- From
- 68 m
- To
- 77 m
- Intercept Depth
- 68 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH076_RW:68-77
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 9.0m interval with 2.06% Zn is a strong result for early-stage exploration, indicating significant mineralization.
Positive factors
- High grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH076_RW : 9.0m@ 1.92% Pb and 2.06% Zn from 68.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.06% Zn is strong for zinc, especially within a 9.0m interval.
Evidence · text
“2.06% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH076_RWRomanian Exploration · copperGrade: 0.21Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH076_RW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 6 m
- From
- 70 m
- To
- 76 m
- Intercept Depth
- 70 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH076_RW:70-76
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 0.21% Cu is a good result for early-stage exploration, contributing to the polymetallic nature of the intercept.
Positive factors
- Good grade for copper
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 0.21% Cu, 2.69% Pb and 2.89% Zn from 70.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH076_RWRomanian Exploration · leadGrade: 2.69Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH076_RW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.69
- Grade Unit
- %
- Intercept
- 6 m
- From
- 70 m
- To
- 76 m
- Intercept Depth
- 70 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH076_RW:70-76
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 2.69% Pb is a bonanza grade for early-stage exploration, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 0.21% Cu, 2.69% Pb and 2.89% Zn from 70.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.69% Pb is exceptional for lead, especially within a 6.0m interval.
Evidence · text
“2.69% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH076_RWRomanian Exploration · zincGrade: 2.89Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH076_RW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.89
- Grade Unit
- %
- Intercept
- 6 m
- From
- 70 m
- To
- 76 m
- Intercept Depth
- 70 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH076_RW:70-76
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 2.89% Zn is a bonanza grade for early-stage exploration, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 0.21% Cu, 2.69% Pb and 2.89% Zn from 70.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.89% Zn is exceptional for zinc, especially within a 6.0m interval.
Evidence · text
“2.89% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH077_LWRomanian Exploration · leadGrade: 0.24Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- G2_CH077_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 12 m
- From
- 1 m
- To
- 13 m
- Intercept Depth
- 1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH077_LW:1-13
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 12.0m interval with 0.24% Pb indicates broad mineralization, though the grade is moderate for early-stage exploration.
Positive factors
- Wide mineralized zone
Negative factors
- Lower grade for lead
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH077_LW : 12.0m@ 0.24% Pb and 0.29% Zn from 1.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH077_LWRomanian Exploration · zincGrade: 0.29Grade Unit: %Intercept: 12 mView all detailsHide details
Identity
- Hole ID
- G2_CH077_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 12 m
- From
- 1 m
- To
- 13 m
- Intercept Depth
- 1 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH077_LW:1-13
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 12.0m interval with 0.29% Zn indicates broad mineralization, though the grade is moderate for early-stage exploration.
Positive factors
- Wide mineralized zone
Negative factors
- Lower grade for zinc
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH077_LW : 12.0m@ 0.24% Pb and 0.29% Zn from 1.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH077_LWRomanian Exploration · leadGrade: 0.38Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- G2_CH077_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 5 m
- From
- 8 m
- To
- 13 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH077_LW:8-13
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 5.0m interval with 0.38% Pb represents a good grade within the broader mineralization, enhancing the overall prospectivity.
Positive factors
- Good grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 5.0m@ 0.38% Pb and 0.49% Zn from 8.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH077_LWRomanian Exploration · zincGrade: 0.49Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- G2_CH077_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 5 m
- From
- 8 m
- To
- 13 m
- Intercept Depth
- 8 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH077_LW:8-13
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 5.0m interval with 0.49% Zn represents a good grade within the broader mineralization, enhancing the overall prospectivity.
Positive factors
- Good grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 5.0m@ 0.38% Pb and 0.49% Zn from 8.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH077_LWRomanian Exploration · leadGrade: 0.6Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH077_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 6 m
- From
- 24 m
- To
- 30 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH077_LW:24-30
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 0.60% Pb represents a good grade within the channel, indicating additional mineralization.
Positive factors
- Good grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 0.60% Pb and 0.55% Zn from 24.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH077_LWRomanian Exploration · zincGrade: 0.55Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH077_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 6 m
- From
- 24 m
- To
- 30 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH077_LW:24-30
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 0.55% Zn represents a good grade within the channel, indicating additional mineralization.
Positive factors
- Good grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 0.60% Pb and 0.55% Zn from 24.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH036_LWRomanian Exploration · copperGrade: 0.13Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH036_LW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 1 m
- From
- 0 m
- To
- 1 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH036_LW:0-1
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 0.13% Cu is a moderate result, indicating copper mineralization at surface.
Positive factors
- Good grade for copper
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH036_LW: 1.0m@ 0.13% Cu, 1.08% Pb and 1.12% Zn from 0.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH036_LWRomanian Exploration · leadGrade: 1.08Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH036_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.08
- Grade Unit
- %
- Intercept
- 1 m
- From
- 0 m
- To
- 1 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH036_LW:0-1
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 1.08% Pb is a strong result, indicating high-grade lead mineralization at surface.
Positive factors
- High grade for lead
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH036_LW: 1.0m@ 0.13% Cu, 1.08% Pb and 1.12% Zn from 0.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.08% Pb is strong for lead, especially within a 1.0m interval.
Evidence · text
“1.08% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH036_LWRomanian Exploration · zincGrade: 1.12Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH036_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.12
- Grade Unit
- %
- Intercept
- 1 m
- From
- 0 m
- To
- 1 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH036_LW:0-1
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 1.12% Zn is a strong result, indicating high-grade zinc mineralization at surface.
Positive factors
- High grade for zinc
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH036_LW: 1.0m@ 0.13% Cu, 1.08% Pb and 1.12% Zn from 0.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.12% Zn is strong for zinc, especially within a 1.0m interval.
Evidence · text
“1.12% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH038_RWRomanian Exploration · copperGrade: 0.1Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- G2_CH038_RW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3 m
- From
- 31 m
- To
- 34 m
- Intercept Depth
- 31 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH038_RW:31-34
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 3.0m interval with 0.10% Cu is a moderate result, indicating copper mineralization.
Positive factors
- Good width
Negative factors
- Lower grade for copper
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH038_RW to G2_CH040_RW: 3.0m@ 0.10% Cu, 0.97% Pb and 0.81% Zn from 31.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH038_RWRomanian Exploration · leadGrade: 0.97Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- G2_CH038_RW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.97
- Grade Unit
- %
- Intercept
- 3 m
- From
- 31 m
- To
- 34 m
- Intercept Depth
- 31 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH038_RW:31-34
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 3.0m interval with 0.97% Pb is a good result for early-stage exploration, indicating significant lead mineralization.
Positive factors
- Good grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH038_RW to G2_CH040_RW: 3.0m@ 0.10% Cu, 0.97% Pb and 0.81% Zn from 31.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH038_RWRomanian Exploration · zincGrade: 0.81Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- G2_CH038_RW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 3 m
- From
- 31 m
- To
- 34 m
- Intercept Depth
- 31 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH038_RW:31-34
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 3.0m interval with 0.81% Zn is a good result for early-stage exploration, indicating significant zinc mineralization.
Positive factors
- Good grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH038_RW to G2_CH040_RW: 3.0m@ 0.10% Cu, 0.97% Pb and 0.81% Zn from 31.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH038_RWRomanian Exploration · copperGrade: 0.15Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH038_RW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 1 m
- From
- 33 m
- To
- 34 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH038_RW:33-34
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 0.15% Cu is a moderate result, indicating copper mineralization within the broader intercept.
Positive factors
- Good grade for copper
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.15% Cu, 1.87% Pb and 1.65% Zn at 33.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH038_RWRomanian Exploration · leadGrade: 1.87Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH038_RW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.87
- Grade Unit
- %
- Intercept
- 1 m
- From
- 33 m
- To
- 34 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH038_RW:33-34
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 1.87% Pb is a bonanza grade, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for lead
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.15% Cu, 1.87% Pb and 1.65% Zn at 33.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.87% Pb is exceptional for lead, especially within a 1.0m interval.
Evidence · text
“1.87% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH038_RWRomanian Exploration · zincGrade: 1.65Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH038_RW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.65
- Grade Unit
- %
- Intercept
- 1 m
- From
- 33 m
- To
- 34 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH038_RW:33-34
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 1.65% Zn is a bonanza grade, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for zinc
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.15% Cu, 1.87% Pb and 1.65% Zn at 33.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.65% Zn is exceptional for zinc, especially within a 1.0m interval.
Evidence · text
“1.65% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH041_LWRomanian Exploration · copperGrade: 0.18Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- G2_CH041_LW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 3 m
- From
- 35 m
- To
- 38 m
- Intercept Depth
- 35 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH041_LW:35-38
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 3.0m interval with 0.18% Cu is a moderate result, indicating copper mineralization.
Positive factors
- Good width
Negative factors
- Lower grade for copper
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH041_LW to G2_CH044_LW: 3.0m @ 0.18% Cu, 1.16% Pb and 1.35% Zn. from 35.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH041_LWRomanian Exploration · leadGrade: 1.16Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- G2_CH041_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.16
- Grade Unit
- %
- Intercept
- 3 m
- From
- 35 m
- To
- 38 m
- Intercept Depth
- 35 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH041_LW:35-38
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 3.0m interval with 1.16% Pb is a strong result for early-stage exploration, indicating significant lead mineralization.
Positive factors
- High grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH041_LW to G2_CH044_LW: 3.0m @ 0.18% Cu, 1.16% Pb and 1.35% Zn. from 35.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.16% Pb is strong for lead, especially within a 3.0m interval.
Evidence · text
“1.16% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH041_LWRomanian Exploration · zincGrade: 1.35Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- G2_CH041_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.35
- Grade Unit
- %
- Intercept
- 3 m
- From
- 35 m
- To
- 38 m
- Intercept Depth
- 35 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH041_LW:35-38
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 3.0m interval with 1.35% Zn is a strong result for early-stage exploration, indicating significant zinc mineralization.
Positive factors
- High grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH041_LW to G2_CH044_LW: 3.0m @ 0.18% Cu, 1.16% Pb and 1.35% Zn. from 35.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.35% Zn is strong for zinc, especially within a 3.0m interval.
Evidence · text
“1.35% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH041_LWRomanian Exploration · copperGrade: 0.44Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH041_LW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 1 m
- From
- 37 m
- To
- 38 m
- Intercept Depth
- 37 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH041_LW:37-38
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 0.44% Cu is a strong result, indicating high-grade copper mineralization within the broader intercept.
Positive factors
- High grade for copper
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.44% Cu, 2.99% Pb and 3.66% Zn at 37.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 0.44% Cu is strong for copper, especially within a 1.0m interval.
Evidence · text
“0.44% Cu”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH041_LWRomanian Exploration · leadGrade: 2.99Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH041_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.99
- Grade Unit
- %
- Intercept
- 1 m
- From
- 37 m
- To
- 38 m
- Intercept Depth
- 37 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH041_LW:37-38
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 2.99% Pb is a bonanza grade, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for lead
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.44% Cu, 2.99% Pb and 3.66% Zn at 37.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.99% Pb is exceptional for lead, especially within a 1.0m interval.
Evidence · text
“2.99% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH041_LWRomanian Exploration · zincGrade: 3.66Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH041_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 3.66
- Grade Unit
- %
- Intercept
- 1 m
- From
- 37 m
- To
- 38 m
- Intercept Depth
- 37 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH041_LW:37-38
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 3.66% Zn is a bonanza grade, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for zinc
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.44% Cu, 2.99% Pb and 3.66% Zn at 37.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 3.66% Zn is exceptional for zinc, especially within a 1.0m interval.
Evidence · text
“3.66% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH052_RFRomanian Exploration · leadGrade: 1.55Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- G2_CH052_RF
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.55
- Grade Unit
- %
- Intercept
- 10 m
- From
- 0 m
- To
- 10 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH052_RF:0-10
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 10.0m interval with 1.55% Pb is a strong result for early-stage exploration, indicating significant lead mineralization.
Positive factors
- High grade for lead
- Wide mineralized zone
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH052_RF to G2_CH062_RF: 10.0m@ 1.55% Pb and 1.59% Zn from 0.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.55% Pb is strong for lead, especially within a 10.0m interval.
Evidence · text
“1.55% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH052_RFRomanian Exploration · zincGrade: 1.59Grade Unit: %Intercept: 10 mView all detailsHide details
Identity
- Hole ID
- G2_CH052_RF
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.59
- Grade Unit
- %
- Intercept
- 10 m
- From
- 0 m
- To
- 10 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH052_RF:0-10
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 10.0m interval with 1.59% Zn is a strong result for early-stage exploration, indicating significant zinc mineralization.
Positive factors
- High grade for zinc
- Wide mineralized zone
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH052_RF to G2_CH062_RF: 10.0m@ 1.55% Pb and 1.59% Zn from 0.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.59% Zn is strong for zinc, especially within a 10.0m interval.
Evidence · text
“1.59% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH052_RFRomanian Exploration · leadGrade: 2.24Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH052_RF
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.24
- Grade Unit
- %
- Intercept
- 6 m
- From
- 2 m
- To
- 8 m
- Intercept Depth
- 2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH052_RF:2-8
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 2.24% Pb is a bonanza grade for early-stage exploration, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 2.24% Pb and 2.41% Zn from 2.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.24% Pb is exceptional for lead, especially within a 6.0m interval.
Evidence · text
“2.24% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH052_RFRomanian Exploration · zincGrade: 2.41Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- G2_CH052_RF
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.41
- Grade Unit
- %
- Intercept
- 6 m
- From
- 2 m
- To
- 8 m
- Intercept Depth
- 2 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH052_RF:2-8
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 6.0m interval with 2.41% Zn is a bonanza grade for early-stage exploration, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 6.0m@ 2.24% Pb and 2.41% Zn from 2.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.41% Zn is exceptional for zinc, especially within a 6.0m interval.
Evidence · text
“2.41% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH074_RWRomanian Exploration · copperGrade: 0.08Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- G2_CH074_RW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 20 m
- From
- 417 m
- To
- 437 m
- Intercept Depth
- 417 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH074_RW:417-437
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 20.0m interval with 0.08% Cu indicates broad mineralization, though the grade is moderate for early-stage exploration.
Positive factors
- Wide mineralized zone
Negative factors
- Lower grade for copper
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH074_RW: 20.0 m @ 0.08% Cu, 1.10% Pb and 1.19% Zn from 417.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH074_RWRomanian Exploration · leadGrade: 1.1Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- G2_CH074_RW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.1
- Grade Unit
- %
- Intercept
- 20 m
- From
- 417 m
- To
- 437 m
- Intercept Depth
- 417 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH074_RW:417-437
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 20.0m interval with 1.10% Pb is a strong result for early-stage exploration, indicating significant lead mineralization.
Positive factors
- High grade for lead
- Wide mineralized zone
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH074_RW: 20.0 m @ 0.08% Cu, 1.10% Pb and 1.19% Zn from 417.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.10% Pb is strong for lead, especially within a 20.0m interval.
Evidence · text
“1.10% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH074_RWRomanian Exploration · zincGrade: 1.19Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- G2_CH074_RW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 1.19
- Grade Unit
- %
- Intercept
- 20 m
- From
- 417 m
- To
- 437 m
- Intercept Depth
- 417 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH074_RW:417-437
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 20.0m interval with 1.19% Zn is a strong result for early-stage exploration, indicating significant zinc mineralization.
Positive factors
- High grade for zinc
- Wide mineralized zone
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH074_RW: 20.0 m @ 0.08% Cu, 1.10% Pb and 1.19% Zn from 417.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 1.19% Zn is strong for zinc, especially within a 20.0m interval.
Evidence · text
“1.19% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH074_RWRomanian Exploration · copperGrade: 0.15Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- G2_CH074_RW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 7 m
- From
- 417 m
- To
- 424 m
- Intercept Depth
- 417 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH074_RW:417-424
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 7.0m interval with 0.15% Cu is a moderate result, indicating copper mineralization within the broader intercept.
Positive factors
- Good grade for copper
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 7.0m@ 0.15% Cu, 2.21% Pb and 2.44% Zn from 417.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH074_RWRomanian Exploration · leadGrade: 2.21Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- G2_CH074_RW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.21
- Grade Unit
- %
- Intercept
- 7 m
- From
- 417 m
- To
- 424 m
- Intercept Depth
- 417 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH074_RW:417-424
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 7.0m interval with 2.21% Pb is a bonanza grade for early-stage exploration, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 7.0m@ 0.15% Cu, 2.21% Pb and 2.44% Zn from 417.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.21% Pb is exceptional for lead, especially within a 7.0m interval.
Evidence · text
“2.21% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH074_RWRomanian Exploration · zincGrade: 2.44Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- G2_CH074_RW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.44
- Grade Unit
- %
- Intercept
- 7 m
- From
- 417 m
- To
- 424 m
- Intercept Depth
- 417 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH074_RW:417-424
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 7.0m interval with 2.44% Zn is a bonanza grade for early-stage exploration, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 7.0m@ 0.15% Cu, 2.21% Pb and 2.44% Zn from 417.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.44% Zn is exceptional for zinc, especially within a 7.0m interval.
Evidence · text
“2.44% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH087_LWRomanian Exploration · copperGrade: 0.12Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- G2_CH087_LW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 8 m
- From
- 0 m
- To
- 8 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH087_LW:0-8
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: An 8.0m interval with 0.12% Cu is a moderate result, indicating copper mineralization.
Positive factors
- Good width
Negative factors
- Lower grade for copper
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH087_LW : 8.0m@ 0.12% Cu, 0.54% Pb and 0.73% Zn from 0.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH087_LWRomanian Exploration · leadGrade: 0.54Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- G2_CH087_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 8 m
- From
- 0 m
- To
- 8 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH087_LW:0-8
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: An 8.0m interval with 0.54% Pb is a good result for early-stage exploration, indicating significant lead mineralization.
Positive factors
- Good grade for lead
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH087_LW : 8.0m@ 0.12% Cu, 0.54% Pb and 0.73% Zn from 0.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH087_LWRomanian Exploration · zincGrade: 0.73Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- G2_CH087_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.73
- Grade Unit
- %
- Intercept
- 8 m
- From
- 0 m
- To
- 8 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH087_LW:0-8
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: An 8.0m interval with 0.73% Zn is a good result for early-stage exploration, indicating significant zinc mineralization.
Positive factors
- Good grade for zinc
- Good width
Negative factors
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“G2_CH087_LW : 8.0m@ 0.12% Cu, 0.54% Pb and 0.73% Zn from 0.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH087_LWRomanian Exploration · copperGrade: 0.39Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH087_LW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH087_LW:6-7
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 0.39% Cu is a strong result, indicating high-grade copper mineralization within the broader intercept.
Positive factors
- High grade for copper
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.39% Cu, 2.75% Pb and 3.71% Zn from 6.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 0.39% Cu is strong for copper, especially within a 1.0m interval.
Evidence · text
“0.39% Cu”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH087_LWRomanian Exploration · leadGrade: 2.75Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH087_LW
- Project
- Romanian Exploration
- Commodity
- lead
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 2.75
- Grade Unit
- %
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH087_LW:6-7
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 2.75% Pb is a bonanza grade, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for lead
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.39% Cu, 2.75% Pb and 3.71% Zn from 6.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 2.75% Pb is exceptional for lead, especially within a 1.0m interval.
Evidence · text
“2.75% Pb”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH087_LWRomanian Exploration · zincGrade: 3.71Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- G2_CH087_LW
- Project
- Romanian Exploration
- Commodity
- zinc
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 3.71
- Grade Unit
- %
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH087_LW:6-7
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Reasoning: A 1.0m interval with 3.71% Zn is a bonanza grade, significantly enhancing the prospectivity of the intercept.
Positive factors
- Bonanza grade for zinc
Negative factors
- Narrow intercept
- Apparent width only
- Collar and downhole surveys pending
Evidence · text
“including 1.0m@ 0.39% Cu, 2.75% Pb and 3.71% Zn from 6.0m”
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The grade of 3.71% Zn is exceptional for zinc, especially within a 1.0m interval.
Evidence · text
“3.71% Zn”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document provides extensive details on QA/QC procedures, including CRMs, blanks, and duplicates.
Evidence · text
“LEMR inserted 57 CRMs, 59 blanks and 111 field duplicates into the channel and drillhole sample stream. QC totals 227 samples, representing 20% quality control data.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Metal grades are reported on the basis of length weighted average values, considering a minimum threshold of 1000 ppm as a trigger value for either Cu, Co, Pb, Ni or Zn. A maximum internal waste of two metres was allowed.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True width is estimated to be within 80% of reported thickness, not precisely stated.
Evidence · text
“True thickness is reported where possible and is generally understood to be within 80% of the reported thickness.”
G2_CH088_RWRomanian Exploration · copperGrade: 0.13Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- G2_CH088_RW
- Project
- Romanian Exploration
- Commodity
- copper
- Region
- romania
- Reported Region
- romania
- Ticker
- LEM
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 4 m
- From
- 4 m
- To
- 8 m
- Intercept Depth
- 4 m
Classification
- Deposit Type
- skarn
- Program
- exploration
- Sample Type
- channel
- Group ID
- G2_CH088_RW:4-8
- Mining Method
- underground
Location
- CRS
- WGS84 UTM Zone 34N
- EPSG
- 32634
- Loc. Confidence
- low
QA/QC
- Laboratory
- ALS Loughrea, Ireland and ALS Rosia Montana, Romania
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, umpire
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- %
- Dilution Disclosed
- Yes
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-03T00:00:00.000Z
Positive factors
- Good width
Negative factors
- Lower grade for copper
- Apparent width only
Evidence · text
“G2_CH088_RW : 4.0m@ 0.13% Cu, 0.94% Pb and 0.93% Zn from 4.0m”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.