Legacy Gold Reports 1.2 g/t Gold over 80ft (24.4m) and 0.79 g/t Gold over 65ft (19.8m), on New Holes from the 2025 Baner Gold Mine Property Drilling Campaign in Idaho
Original announcement by tmx on
- Company
- Legacy Gold Mines Ltd.
- Ticker
- LEGY
- Exchange
- TSX
- Region
- Idaho
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-18 06:58:56 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Legacy Gold Mines reports assay results from three new RC drill holes at its Baner Gold Mine Property in Idaho, USA. The drilling campaign, part of a 2025 exploration program, returned multiple gold intersections, including 1.18 g/t gold over 24.4m and 0.79 g/t gold over 19.8m. These results support a new geological interpretation of flatter dipping mineralized zones, which the company believes could lead to a far greater potential resource.
Reasoning: The document reports new drill results from the 2025 Baner Gold Mine Property, highlighting multiple gold intersections, some with high grades. These results support a new geological interpretation of flatter dipping zones, which could significantly increase the resource potential. QA/QC protocols are disclosed, enhancing confidence in the data, though true widths remain unknown and assay delays were noted.
Positive factors
- Multiple gold intersections reported, including high-grade zones.
- New geological interpretation (flatter dip) is supported by results, suggesting potential for increased resource.
- QA/QC procedures are disclosed, including QP sign-off, accredited lab, and methods.
Negative factors
- True widths of intercepts are unknown, limiting geological confidence.
- Assay results were slower than expected, indicating potential operational delays.
- Some intervals were not sampled (NS), leaving gaps in data.
Facts used in scoring: 25
Extracted facts
Stored fact records: 25. Some facts used in scoring do not have a stored record.
Drill Results (25)
LG25-011Baner Gold Mine · goldGrade: 1Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 0 m
- To
- 4.5 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:0-4.5
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width starting at surface, which is positive for potential open-pit development. QA/QC and compositing rules are transparent, but the lack of true width information reduces confidence.
Positive factors
- Moderate gold grade over a reasonable width.
- Intercept starts at surface, indicating potential for open-pit mining.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“1.0”
Context: 4.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 2.33Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 2.33
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 0 m
- To
- 1.5 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:0-1.5
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This narrow intercept shows a strong gold grade at surface, which is a positive indicator for high-grade mineralization. However, its narrowness and unknown true width temper its overall materiality.
Positive factors
- Strong gold grade, indicating a higher-grade zone within the broader intercept.
- Intercept starts at surface, favorable for open-pit potential.
- QA/QC and compositing rules are disclosed.
Negative factors
- Narrow intercept length.
- True width is unknown.
Evidence · table
“2.33”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 0.34Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 9.1 m
- To
- 10.7 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 9.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:9.1-10.7
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, which is less material. While above cutoff, its economic significance is limited, and the true width is unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.34”
Context: 1.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 0.25Grade Unit: g/tIntercept: 13.8 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 13.8 m
- From
- 41.1 m
- To
- 54.9 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 41.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:41.1-54.9
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a moderate width, which is above the cutoff but not particularly high-grade. The lack of true width information is a drawback.
Positive factors
- Grade is above the stated cutoff over a moderate width.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade.
- True width is unknown.
Evidence · table
“0.25”
Context: 13.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 0.69Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 48.8 m
- To
- 50.3 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 41.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:48.8-50.3
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This narrow intercept shows a moderate gold grade, which is a positive inclusion within a broader zone. However, its narrowness and unknown true width limit its individual significance.
Positive factors
- Moderate gold grade, indicating a higher-grade zone within the broader intercept.
- QA/QC and compositing rules are disclosed.
Negative factors
- Narrow intercept length.
- True width is unknown.
Evidence · table
“0.69”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 0.27Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 70.1 m
- To
- 71.6 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 70.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:70.1-71.6
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.27”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 0.26Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 89.9 m
- To
- 91.4 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 89.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:89.9-91.4
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.26”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 0.79Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 143.3 m
- To
- 163.1 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 143.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:143.3-163.1
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, which is a positive result for exploration. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Moderate gold grade over a significant width, indicating good continuity.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“0.79”
Context: 19.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-011Baner Gold Mine · goldGrade: 1.59Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- LG25-011
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 1.59
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 143.3 m
- To
- 150.9 m
- Hole Depth
- 172.21 m
- Intercept Depth
- 143.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-011:143.3-150.9
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069814
- Northing
- 615372
- Azimuth
- 240 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, representing a significant higher-grade zone. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Strong gold grade over a moderate width, indicating a higher-grade zone within the broader intercept.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“1.59”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 0.42Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 32 m
- To
- 35.1 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 32 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:32-35.1
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, which is above the cutoff but not highly material. The true width is unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.42”
Context: 3.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 0.22Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 54.9 m
- To
- 56.4 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 54.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:54.9-56.4
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.22”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 0.4Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 79.2 m
- To
- 80.8 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 79.2 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:79.2-80.8
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, which is above the cutoff but not highly material. The true width is unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.40”
Context: 1.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 0.76Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 85.3 m
- To
- 86.9 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 85.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:85.3-86.9
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width. While above cutoff, its individual significance is limited by its narrowness and unknown true width.
Positive factors
- Moderate gold grade over a narrow width.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“0.76”
Context: 1.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 1.18Grade Unit: g/tIntercept: 24.4 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 1.18
- Grade Unit
- g/t
- Intercept
- 24.4 m
- From
- 123.4 m
- To
- 147.8 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 123.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:123.4-147.8
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This is a highly material intercept with a strong gold grade over a significant width, supporting the company's new geological interpretation. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Strong gold grade over a significant width, indicating good continuity and potential for bulk tonnage.
- Supports the new flatter dip interpretation.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“1.18”
Context: 24.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 1.9Grade Unit: g/tIntercept: 13.7 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 13.7 m
- From
- 125 m
- To
- 138.7 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 123.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:125-138.7
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, representing a significant higher-grade zone within the broader intercept. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Strong gold grade over a moderate width, indicating a significant higher-grade zone.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“1.90”
Context: 13.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 4.9Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 4.9
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 125 m
- To
- 126.5 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 123.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:125-126.5
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This narrow intercept shows an exceptional gold grade, which is a very positive indicator of high-grade mineralization. However, its narrowness and unknown true width temper its overall materiality.
Positive factors
- Exceptional gold grade, indicating a very high-grade zone.
- QA/QC and compositing rules are disclosed.
Negative factors
- Narrow intercept length.
- True width is unknown.
Evidence · table
“4.9”
Context: 1.5
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptional gold grade of 4.9 g/t, well above the open pit strong threshold of 2 g/t.
Evidence · table
“4.9”
Context: 1.5
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 4.64Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 4.64
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 134.1 m
- To
- 138.7 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 123.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:134.1-138.7
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a moderate width, representing a very significant high-grade zone. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Exceptional gold grade over a moderate width, indicating a very high-grade zone.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“4.64”
Context: 4.6
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptional gold grade of 4.64 g/t, well above the open pit strong threshold of 2 g/t.
Evidence · table
“4.64”
Context: 4.6
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-012Baner Gold Mine · goldGrade: 6Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- LG25-012
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 6
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 134.1 m
- To
- 137.2 m
- Hole Depth
- 147.83 m
- Intercept Depth
- 123.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-012:134.1-137.2
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069817
- Northing
- 615376
- Azimuth
- 241 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a moderate width, representing a very significant high-grade zone. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Exceptional gold grade over a moderate width, indicating a very high-grade zone.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“6.0”
Context: 3.1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptional gold grade of 6.0 g/t, well above the open pit exceptional threshold of 5 g/t.
Evidence · table
“6.0”
Context: 3.1
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-013Baner Gold Mine · goldGrade: 0.21Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- LG25-013
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 7.6 m
- To
- 10.7 m
- Hole Depth
- 160.02 m
- Intercept Depth
- 7.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-013:7.6-10.7
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069816
- Northing
- 615182
- Azimuth
- 124 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.21”
Context: 3.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-013Baner Gold Mine · goldGrade: 0.18Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-013
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 36.6 m
- To
- 38.1 m
- Hole Depth
- 160.02 m
- Intercept Depth
- 36.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-013:36.6-38.1
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069816
- Northing
- 615182
- Azimuth
- 124 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a sub-economic gold grade below the stated cutoff over a narrow width, indicating it is not material. The true width is also unknown.
Positive factors
- QA/QC and compositing rules are disclosed.
Negative factors
- Sub-economic gold grade, below the stated cutoff.
- Narrow width.
- True width is unknown.
Evidence · table
“0.18”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-013Baner Gold Mine · goldGrade: 0.2Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LG25-013
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 85.3 m
- To
- 86.9 m
- Hole Depth
- 160.02 m
- Intercept Depth
- 85.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-013:85.3-86.9
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069816
- Northing
- 615182
- Azimuth
- 124 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade at the stated cutoff over a narrow width, indicating limited economic significance. The true width is also unknown.
Positive factors
- Grade is at the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.20”
Context: 1.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-013Baner Gold Mine · goldGrade: 0.19Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- LG25-013
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 102.1 m
- To
- 103.6 m
- Hole Depth
- 160.02 m
- Intercept Depth
- 102.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-013:102.1-103.6
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069816
- Northing
- 615182
- Azimuth
- 124 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a sub-economic gold grade below the stated cutoff over a narrow width, indicating it is not material. The true width is also unknown.
Positive factors
- QA/QC and compositing rules are disclosed.
Negative factors
- Sub-economic gold grade, below the stated cutoff.
- Narrow width.
- True width is unknown.
Evidence · table
“0.19”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-013Baner Gold Mine · goldGrade: 1.08Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- LG25-013
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 141.7 m
- To
- 150.9 m
- Hole Depth
- 160.02 m
- Intercept Depth
- 141.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-013:141.7-150.9
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069816
- Northing
- 615182
- Azimuth
- 124 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive result supporting the new geological interpretation. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Moderate gold grade over a moderate width.
- Supports the new flatter dip interpretation.
- QA/QC and compositing rules are disclosed.
Negative factors
- True width is unknown.
Evidence · table
“1.08”
Context: 9.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-013Baner Gold Mine · goldGrade: 3.7Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LG25-013
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 3.7
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 141.7 m
- To
- 143.3 m
- Hole Depth
- 160.02 m
- Intercept Depth
- 141.7 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-013:141.7-143.3
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069816
- Northing
- 615182
- Azimuth
- 124 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This narrow intercept shows a strong gold grade, representing a significant higher-grade zone within the broader intercept. The disclosed QA/QC adds confidence, but the unknown true width is a limitation.
Positive factors
- Strong gold grade, indicating a higher-grade zone within the broader intercept.
- QA/QC and compositing rules are disclosed.
Negative factors
- Narrow intercept length.
- True width is unknown.
Evidence · table
“3.7”
Context: 1.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
LG25-013Baner Gold Mine · goldGrade: 0.28Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- LG25-013
- Project
- Baner Gold Mine
- Commodity
- gold
- Region
- usa_id
- Reported Region
- usa_id
- Ticker
- LEGY
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 155.4 m
- To
- 157 m
- Hole Depth
- 160.02 m
- Intercept Depth
- 155.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- LG25-013:155.4-157
- Mining Method
- open_pit
Location
- Location
- Main Zone
- Easting
- 5069816
- Northing
- 615182
- Azimuth
- 124 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 10 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-10T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown.
Positive factors
- Grade is above the stated cutoff.
- QA/QC and compositing rules are disclosed.
Negative factors
- Weak gold grade over a narrow width.
- True width is unknown.
Evidence · table
“0.28”
Context: 1.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“True widths are unknown until zone dips are proven.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution.”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.