# Legacy Gold Reports 1.2 g/t Gold over 80ft \(24.4m\) and 0.79 g/t Gold over 65ft \(19.8m\), on New Holes from the 2025 Baner Gold Mine Property Drilling Campaign in Idaho Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692 Original source: https://money.tmx.com/en/quote/LEGY/news/8270742212946063/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19- Publisher: tmx Original announcement: 2026-02-10T12:30:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Legacy Gold Mines Ltd. - Ticker: LEGY - Exchange: TSX - Region: Idaho - Primary commodity: Gold - Secondary commodities: None reported - Document categories: Drill results - Extracted: 2026-09-18 06:58:56 UTC Narrative sentiment: 0.70 · Bullish ## Minestarters Atlas summary Legacy Gold Mines reports assay results from three new RC drill holes at its Baner Gold Mine Property in Idaho, USA. The drilling campaign, part of a 2025 exploration program, returned multiple gold intersections, including 1.18 g/t gold over 24.4m and 0.79 g/t gold over 19.8m. These results support a new geological interpretation of flatter dipping mineralized zones, which the company believes could lead to a far greater potential resource. Reasoning: The document reports new drill results from the 2025 Baner Gold Mine Property, highlighting multiple gold intersections, some with high grades. These results support a new geological interpretation of flatter dipping zones, which could significantly increase the resource potential. QA/QC protocols are disclosed, enhancing confidence in the data, though true widths remain unknown and assay delays were noted. - Positive factor: Multiple gold intersections reported, including high-grade zones. - Positive factor: New geological interpretation \(flatter dip\) is supported by results, suggesting potential for increased resource. - Positive factor: QA/QC procedures are disclosed, including QP sign-off, accredited lab, and methods. - Negative factor: True widths of intercepts are unknown, limiting geological confidence. - Negative factor: Assay results were slower than expected, indicating potential operational delays. - Negative factor: Some intervals were not sampled \(NS\), leaving gaps in data. Facts used in scoring: 25 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 25. Some facts used in scoring do not have a stored record. ## Drill Results (25) ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-0) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 1 - Grade Unit: g/t - Intercept: 4.5 m - From: 0 m - To: 4.5 m - Hole Depth: 172.21 m - Intercept Depth: 0 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:0-4.5 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a moderate gold grade over a reasonable width starting at surface, which is positive for potential open-pit development. QA/QC and compositing rules are transparent, but the lack of true width information reduces confidence. - Positive factor: Moderate gold grade over a reasonable width. - Positive factor: Intercept starts at surface, indicating potential for open-pit mining. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 1.0 Context: 4.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-1) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 2.33 - Grade Unit: g/t - Intercept: 1.5 m - From: 0 m - To: 1.5 m - Hole Depth: 172.21 m - Intercept Depth: 0 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:0-1.5 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This narrow intercept shows a strong gold grade at surface, which is a positive indicator for high-grade mineralization. However, its narrowness and unknown true width temper its overall materiality. - Positive factor: Strong gold grade, indicating a higher-grade zone within the broader intercept. - Positive factor: Intercept starts at surface, favorable for open-pit potential. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Narrow intercept length. - Negative factor: True width is unknown. Evidence · table > 2.33 Context: 1.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-2) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.34 - Grade Unit: g/t - Intercept: 1.6 m - From: 9.1 m - To: 10.7 m - Hole Depth: 172.21 m - Intercept Depth: 9.1 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:9.1-10.7 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, which is less material. While above cutoff, its economic significance is limited, and the true width is unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.34 Context: 1.6 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-3) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.25 - Grade Unit: g/t - Intercept: 13.8 m - From: 41.1 m - To: 54.9 m - Hole Depth: 172.21 m - Intercept Depth: 41.1 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:41.1-54.9 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a moderate width, which is above the cutoff but not particularly high-grade. The lack of true width information is a drawback. - Positive factor: Grade is above the stated cutoff over a moderate width. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade. - Negative factor: True width is unknown. Evidence · table > 0.25 Context: 13.8 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-4) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.69 - Grade Unit: g/t - Intercept: 1.5 m - From: 48.8 m - To: 50.3 m - Hole Depth: 172.21 m - Intercept Depth: 41.1 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:48.8-50.3 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This narrow intercept shows a moderate gold grade, which is a positive inclusion within a broader zone. However, its narrowness and unknown true width limit its individual significance. - Positive factor: Moderate gold grade, indicating a higher-grade zone within the broader intercept. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Narrow intercept length. - Negative factor: True width is unknown. Evidence · table > 0.69 Context: 1.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-5) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.27 - Grade Unit: g/t - Intercept: 1.5 m - From: 70.1 m - To: 71.6 m - Hole Depth: 172.21 m - Intercept Depth: 70.1 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:70.1-71.6 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.27 Context: 1.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-6) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.26 - Grade Unit: g/t - Intercept: 1.5 m - From: 89.9 m - To: 91.4 m - Hole Depth: 172.21 m - Intercept Depth: 89.9 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:89.9-91.4 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.26 Context: 1.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-7) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.79 - Grade Unit: g/t - Intercept: 19.8 m - From: 143.3 m - To: 163.1 m - Hole Depth: 172.21 m - Intercept Depth: 143.3 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:143.3-163.1 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a moderate gold grade over a significant width, which is a positive result for exploration. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Moderate gold grade over a significant width, indicating good continuity. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 0.79 Context: 19.8 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-011 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-8) Baner Gold Mine · gold #### Identity - Hole ID: LG25-011 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 1.59 - Grade Unit: g/t - Intercept: 7.6 m - From: 143.3 m - To: 150.9 m - Hole Depth: 172.21 m - Intercept Depth: 143.3 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-011:143.3-150.9 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069814 - Northing: 615372 - Azimuth: 240 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a strong gold grade over a moderate width, representing a significant higher-grade zone. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Strong gold grade over a moderate width, indicating a higher-grade zone within the broader intercept. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 1.59 Context: 7.6 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-9) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.42 - Grade Unit: g/t - Intercept: 3.1 m - From: 32 m - To: 35.1 m - Hole Depth: 147.83 m - Intercept Depth: 32 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:32-35.1 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, which is above the cutoff but not highly material. The true width is unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.42 Context: 3.1 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-10) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.22 - Grade Unit: g/t - Intercept: 1.5 m - From: 54.9 m - To: 56.4 m - Hole Depth: 147.83 m - Intercept Depth: 54.9 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:54.9-56.4 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.22 Context: 1.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-11) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.4 - Grade Unit: g/t - Intercept: 1.6 m - From: 79.2 m - To: 80.8 m - Hole Depth: 147.83 m - Intercept Depth: 79.2 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:79.2-80.8 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, which is above the cutoff but not highly material. The true width is unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.40 Context: 1.6 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-12) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.76 - Grade Unit: g/t - Intercept: 1.6 m - From: 85.3 m - To: 86.9 m - Hole Depth: 147.83 m - Intercept Depth: 85.3 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:85.3-86.9 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a moderate gold grade over a narrow width. While above cutoff, its individual significance is limited by its narrowness and unknown true width. - Positive factor: Moderate gold grade over a narrow width. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 0.76 Context: 1.6 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-13) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 1.18 - Grade Unit: g/t - Intercept: 24.4 m - From: 123.4 m - To: 147.8 m - Hole Depth: 147.83 m - Intercept Depth: 123.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:123.4-147.8 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This is a highly material intercept with a strong gold grade over a significant width, supporting the company's new geological interpretation. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Strong gold grade over a significant width, indicating good continuity and potential for bulk tonnage. - Positive factor: Supports the new flatter dip interpretation. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 1.18 Context: 24.4 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-14) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 1.9 - Grade Unit: g/t - Intercept: 13.7 m - From: 125 m - To: 138.7 m - Hole Depth: 147.83 m - Intercept Depth: 123.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:125-138.7 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a strong gold grade over a moderate width, representing a significant higher-grade zone within the broader intercept. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Strong gold grade over a moderate width, indicating a significant higher-grade zone. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 1.90 Context: 13.7 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-15) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 4.9 - Grade Unit: g/t - Intercept: 1.5 m - From: 125 m - To: 126.5 m - Hole Depth: 147.83 m - Intercept Depth: 123.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:125-126.5 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This narrow intercept shows an exceptional gold grade, which is a very positive indicator of high-grade mineralization. However, its narrowness and unknown true width temper its overall materiality. - Positive factor: Exceptional gold grade, indicating a very high-grade zone. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Narrow intercept length. - Negative factor: True width is unknown. Evidence · table > 4.9 Context: 1.5 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: Exceptional gold grade of 4.9 g/t, well above the open pit strong threshold of 2 g/t. Evidence · table > 4.9 Context: 1.5 **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-16) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 4.64 - Grade Unit: g/t - Intercept: 4.6 m - From: 134.1 m - To: 138.7 m - Hole Depth: 147.83 m - Intercept Depth: 123.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:134.1-138.7 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows an exceptional gold grade over a moderate width, representing a very significant high-grade zone. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Exceptional gold grade over a moderate width, indicating a very high-grade zone. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 4.64 Context: 4.6 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: Exceptional gold grade of 4.64 g/t, well above the open pit strong threshold of 2 g/t. Evidence · table > 4.64 Context: 4.6 **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-012 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-17) Baner Gold Mine · gold #### Identity - Hole ID: LG25-012 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 6 - Grade Unit: g/t - Intercept: 3.1 m - From: 134.1 m - To: 137.2 m - Hole Depth: 147.83 m - Intercept Depth: 123.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-012:134.1-137.2 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069817 - Northing: 615376 - Azimuth: 241 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows an exceptional gold grade over a moderate width, representing a very significant high-grade zone. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Exceptional gold grade over a moderate width, indicating a very high-grade zone. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 6.0 Context: 3.1 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: Exceptional gold grade of 6.0 g/t, well above the open pit exceptional threshold of 5 g/t. Evidence · table > 6.0 Context: 3.1 **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-18) Baner Gold Mine · gold #### Identity - Hole ID: LG25-013 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.21 - Grade Unit: g/t - Intercept: 3.1 m - From: 7.6 m - To: 10.7 m - Hole Depth: 160.02 m - Intercept Depth: 7.6 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-013:7.6-10.7 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069816 - Northing: 615182 - Azimuth: 124 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.21 Context: 3.1 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-19) Baner Gold Mine · gold #### Identity - Hole ID: LG25-013 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.18 - Grade Unit: g/t - Intercept: 1.5 m - From: 36.6 m - To: 38.1 m - Hole Depth: 160.02 m - Intercept Depth: 36.6 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-013:36.6-38.1 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069816 - Northing: 615182 - Azimuth: 124 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a sub-economic gold grade below the stated cutoff over a narrow width, indicating it is not material. The true width is also unknown. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Sub-economic gold grade, below the stated cutoff. - Negative factor: Narrow width. - Negative factor: True width is unknown. Evidence · table > 0.18 Context: 1.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-20) Baner Gold Mine · gold #### Identity - Hole ID: LG25-013 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.2 - Grade Unit: g/t - Intercept: 1.6 m - From: 85.3 m - To: 86.9 m - Hole Depth: 160.02 m - Intercept Depth: 85.3 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-013:85.3-86.9 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069816 - Northing: 615182 - Azimuth: 124 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade at the stated cutoff over a narrow width, indicating limited economic significance. The true width is also unknown. - Positive factor: Grade is at the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.20 Context: 1.6 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-21) Baner Gold Mine · gold #### Identity - Hole ID: LG25-013 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.19 - Grade Unit: g/t - Intercept: 1.5 m - From: 102.1 m - To: 103.6 m - Hole Depth: 160.02 m - Intercept Depth: 102.1 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-013:102.1-103.6 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069816 - Northing: 615182 - Azimuth: 124 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a sub-economic gold grade below the stated cutoff over a narrow width, indicating it is not material. The true width is also unknown. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Sub-economic gold grade, below the stated cutoff. - Negative factor: Narrow width. - Negative factor: True width is unknown. Evidence · table > 0.19 Context: 1.5 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-22) Baner Gold Mine · gold #### Identity - Hole ID: LG25-013 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 1.08 - Grade Unit: g/t - Intercept: 9.2 m - From: 141.7 m - To: 150.9 m - Hole Depth: 160.02 m - Intercept Depth: 141.7 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-013:141.7-150.9 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069816 - Northing: 615182 - Azimuth: 124 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a moderate gold grade over a moderate width, which is a positive result supporting the new geological interpretation. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Moderate gold grade over a moderate width. - Positive factor: Supports the new flatter dip interpretation. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: True width is unknown. Evidence · table > 1.08 Context: 9.2 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-23) Baner Gold Mine · gold #### Identity - Hole ID: LG25-013 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 3.7 - Grade Unit: g/t - Intercept: 1.6 m - From: 141.7 m - To: 143.3 m - Hole Depth: 160.02 m - Intercept Depth: 141.7 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-013:141.7-143.3 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069816 - Northing: 615182 - Azimuth: 124 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This narrow intercept shows a strong gold grade, representing a significant higher-grade zone within the broader intercept. The disclosed QA/QC adds confidence, but the unknown true width is a limitation. - Positive factor: Strong gold grade, indicating a higher-grade zone within the broader intercept. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Narrow intercept length. - Negative factor: True width is unknown. Evidence · table > 3.7 Context: 1.6 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ### LG25-013 [Link to this fact](https://atlas-extractions.minestarters.com/news/legacy-gold-reports-1-2-g-t-gold-over-80ft-24-4m-and-0-79-g-t-gold-over-65ft-19--36099457-3f80-43c2-b460-df049d95a692#fact-drill-facts-24) Baner Gold Mine · gold #### Identity - Hole ID: LG25-013 - Project: Baner Gold Mine - Commodity: gold - Region: usa\_id - Reported Region: usa\_id - Ticker: LEGY #### Geometry - Grade: 0.28 - Grade Unit: g/t - Intercept: 1.6 m - From: 155.4 m - To: 157 m - Hole Depth: 160.02 m - Intercept Depth: 155.4 m #### Classification - Program: exploration - Sample Type: drill - Group ID: LG25-013:155.4-157 - Mining Method: open\_pit #### Location - Location: Main Zone - Easting: 5069816 - Northing: 615182 - Azimuth: 124 ° - Dip: -55 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Compositing - Cutoff Grade: 0.2 - Cutoff Unit: g/t - Dilution Disclosed: Yes - Max Dilution: 10 m #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-02-10T00:00:00.000Z Reasoning: This intercept shows a weak gold grade over a narrow width, barely above the cutoff, indicating limited economic significance. The true width is also unknown. - Positive factor: Grade is above the stated cutoff. - Positive factor: QA/QC and compositing rules are disclosed. - Negative factor: Weak gold grade over a narrow width. - Negative factor: True width is unknown. Evidence · table > 0.28 Context: 1.6 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Evidence · text > True widths are unknown until zone dips are proven. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Evidence · text > Mr. Mike Sutton, P.Geo., Director and VP of Exploration of the Company, is the Qualified Person, as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects , who reviewed and approved scientific and technical disclosure in this press release. **Compositing Transparent** Polarity: positive Definition: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals. Evidence · text > Composite intersections are calculated using a 0.2 g/t cutoff for gold with 10 m internal dilution. ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.