# Untitled mining news story

Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f

Original source: https://www.sec.gov/Archives/edgar/data/1713748/000110465923107020/tm2327787d1_ex99-1.htm

Publisher: research

Original announcement: Unknown date

Analysis by Minestarters Atlas

Atlas analysis published: 2026-11-04T18:20:13.038Z

Atlas analysis updated: 2026-11-04T18:20:13.038Z

- Company: Skeena Resources Limited

- Ticker: SKE

- Exchange: TSX

- Region: British Columbia

- Primary commodity: Gold

- Secondary commodities: Silver, Copper, Zinc

- Document categories: Other, Drill results

- Extracted: 2026-11-04 18:20:13 UTC

Narrative sentiment: 0.32 · Bullish

## Minestarters Atlas summary

Skeena reported a regional exploration update for its 100% owned KSP Property in British Columbia, highlighting new rock grab samples from the Tami, Khyber Gap and Pins targets. The release describes gold-copper mineralization styles along the Bronson Corridor and says the work is helping define more focused targets. It is an early-stage exploration update, not a drill results or resource announcement.

Reasoning: This is a regional exploration update with new surface sampling and target generation rather than completed drilling, resource, metallurgy or financing. The results are encouraging for gold-copper prospectivity, but they are early-stage and based on grab samples.

- Positive factor: Provides a regional exploration update on the 100% owned KSP Property

- Positive factor: Reports new rock grab sample results from Tami, Khyber Gap and Pins

- Positive factor: Identifies Au-Cu porphyry, skarn/replacement and epithermal vein styles along the Bronson Corridor

- Positive factor: Qualified Person sign-off is stated

- Negative factor: Surface grab samples are selective and not drill results

- Negative factor: No assay QA/QC laboratory details are disclosed

- Negative factor: Sample locations are referenced to maps but not fully quantified in coordinates

- Rubric flag: Document classification — This is a regional exploration update with surface grab samples and target generation, so it is not drill\_results or resource\_update as the primary category.

Facts used in scoring: 21

## Classification and evidence

**Nearology Play**

Polarity: neutral

Story-specific tag

Definition: Value premise rests on proximity to a known deposit rather than own results.

Why it applies: The KSP Property is described as 'located 24 kilometers southwest of Eskay Creek' and 'extends southeast from Skeena’s past-producing Snip mine'.

Evidence · text

> located 24 kilometers southwest of Eskay Creek

**QA/QC Disclosed**

Polarity: positive

Story-specific tag

Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\).

Why it applies: A Qualified Person is named and the release states it adheres to CIM Best Practices Guidelines.

Evidence · text

> Paul Geddes, P.Geo., Senior Vice President, Exploration & Resource Development, is the Qualified Person

**Step-Out Extension**

Polarity: positive

Story-specific tag

Definition: Mineralization extended beyond the previously known limit.

Why it applies: The new Khyber Gap occurrence is described as a new exposure suggesting potential to expand mineralization into new areas.

Evidence · text

> suggests potential to expand this style of mineralization into new areas

**Apparent Width Only**

Polarity: negative

Story-specific tag

Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: The Pins veins are described as 'up to 1.5 metres wide' but this is surface geology, not a drilled true width with orientation.

Evidence · text

> Zn-rich epithermal veins up to 1.5 metres wide

## Extracted facts

Stored fact records: 21. Some facts used in scoring do not have a stored record.

## Drill Results (21)

### Fact 1

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-0)

KSP · gold

#### Identity

- Project: KSP
- Commodity: gold
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 14.2
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '14.20 g/t Au' from the Tami target as a rock grab sample. It is strong gold grade, but because it is surface sampling rather than drilling, the result is less definitive than a drill intercept.

- Positive factor: High-grade gold grab sample

- Positive factor: Part of newly highlighted Tami target

- Negative factor: Surface grab sample is selective and not a drill intercept

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 14.20 g/t Au, 11.4 g/t Ag, 1.09% Cu, 0.05% Zn \(K063909\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 2

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-1)

KSP · silver

#### Identity

- Project: KSP
- Commodity: silver
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 11.4
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '11.4 g/t Ag' for the Tami target. Silver is a secondary metal here, so the result is supportive but not the main investment driver.

- Positive factor: Silver present in a high-grade polymetallic grab sample

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 14.20 g/t Au, 11.4 g/t Ag, 1.09% Cu, 0.05% Zn \(K063909\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 3

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-2)

KSP · copper

#### Identity

- Project: KSP
- Commodity: copper
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 1.09
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '1.09% Cu' from the Tami target. That is a meaningful copper value, but the sample is still a selective grab sample rather than drilled material.

- Positive factor: Copper grade is strong in a grab sample

- Positive factor: Supports Au-Cu porphyry-style mineralization at Tami

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 14.20 g/t Au, 11.4 g/t Ag, 1.09% Cu, 0.05% Zn \(K063909\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 4

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-3)

KSP · zinc

#### Identity

- Project: KSP
- Commodity: zinc
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.05
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '0.05% Zn' for the Tami target. This is a trace byproduct value and adds limited standalone significance.

- Positive factor: Zinc is present alongside gold, silver and copper

- Negative factor: Very low zinc grade

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 14.20 g/t Au, 11.4 g/t Ag, 1.09% Cu, 0.05% Zn \(K063909\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 5

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-4)

KSP · gold

#### Identity

- Project: KSP
- Commodity: gold
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 9.26
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '9.26 g/t Au' from the Tami target. This is a strong gold grade, but still from a grab sample so the technical confidence is limited.

- Positive factor: High-grade gold grab sample

- Positive factor: Confirms mineralization at Tami

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 9.26 g/t Au, 6.9 g/t Ag, 0.71% Cu, 0.02% Zn \(K063916\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 6

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-5)

KSP · silver

#### Identity

- Project: KSP
- Commodity: silver
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 6.9
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '6.9 g/t Ag' from the Tami target. It is supportive byproduct silver but not the primary focus.

- Positive factor: Silver accompanies the gold and copper values at Tami

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 9.26 g/t Au, 6.9 g/t Ag, 0.71% Cu, 0.02% Zn \(K063916\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 7

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-6)

KSP · copper

#### Identity

- Project: KSP
- Commodity: copper
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.71
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '0.71% Cu' from the Tami target. This is a meaningful copper grade, though still based on selective surface sampling.

- Positive factor: Copper value remains elevated in the Tami grab sample suite

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 9.26 g/t Au, 6.9 g/t Ag, 0.71% Cu, 0.02% Zn \(K063916\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 8

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-7)

KSP · zinc

#### Identity

- Project: KSP
- Commodity: zinc
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.02
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '0.02% Zn' from the Tami target. This is negligible in economic terms.

- Positive factor: Zinc is present in the Tami sample suite

- Negative factor: Very low zinc grade

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 9.26 g/t Au, 6.9 g/t Ag, 0.71% Cu, 0.02% Zn \(K063916\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 9

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-8)

KSP · gold

#### Identity

- Project: KSP
- Commodity: gold
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 2.39
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '2.39 g/t Au' from the Tami target. This is a respectable gold result, though lower than the other Tami grabs.

- Positive factor: Gold remains above weak thresholds for a surface sample

- Negative factor: Selective grab sample

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 2.39 g/t Au, 5.9 g/t Ag, 0.72% Cu, 0.13% Zn \(K063913\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 10

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-9)

KSP · silver

#### Identity

- Project: KSP
- Commodity: silver
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 5.9
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '5.9 g/t Ag' from the Tami target. It is a modest byproduct silver result.

- Positive factor: Silver is present with the Tami gold-copper result

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 2.39 g/t Au, 5.9 g/t Ag, 0.72% Cu, 0.13% Zn \(K063913\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 11

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-10)

KSP · copper

#### Identity

- Project: KSP
- Commodity: copper
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.72
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '0.72% Cu' from the Tami target. That supports copper prospectivity, though the selective sampling limits confidence.

- Positive factor: Copper grade is elevated in the Tami target suite

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 2.39 g/t Au, 5.9 g/t Ag, 0.72% Cu, 0.13% Zn \(K063913\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 12

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-11)

KSP · zinc

#### Identity

- Project: KSP
- Commodity: zinc
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.13
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Tami Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '0.13% Zn' from the Tami target. This is a low zinc value with limited standalone significance.

- Positive factor: Zinc is present in the Tami sample suite

- Negative factor: Low zinc grade

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> 2.39 g/t Au, 5.9 g/t Ag, 0.72% Cu, 0.13% Zn \(K063913\)

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 13

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-12)

KSP · gold

#### Identity

- Project: KSP
- Commodity: gold
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 6.52
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Khyber Gap
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document says Khyber Gap is a new exposure grading '6.52 g/t Au'. This is a strong gold result from newly exposed mineralization, though it is not a drill intercept.

- Positive factor: Strong gold grade from a new exposure

- Positive factor: Described as a new occurrence

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> Grading 6.52 g/t Au, 27.40 g/t Ag, 0.14% Cu and 3.82% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 14

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-13)

KSP · silver

#### Identity

- Project: KSP
- Commodity: silver
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 27.4
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Khyber Gap
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '27.40 g/t Ag' for Khyber Gap. This is a notable byproduct silver value, but still from a grab sample.

- Positive factor: Silver is elevated in the new Khyber Gap occurrence

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> Grading 6.52 g/t Au, 27.40 g/t Ag, 0.14% Cu and 3.82% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 15

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-14)

KSP · copper

#### Identity

- Project: KSP
- Commodity: copper
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.14
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Khyber Gap
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '0.14% Cu' at Khyber Gap. This is a low copper value in isolation, though it supports a polymetallic system.

- Positive factor: Copper is present in the new Khyber Gap occurrence

- Negative factor: Low copper grade

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> Grading 6.52 g/t Au, 27.40 g/t Ag, 0.14% Cu and 3.82% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 16

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-15)

KSP · zinc

#### Identity

- Project: KSP
- Commodity: zinc
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 3.82
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Khyber Gap
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document states '3.82% Zn' at Khyber Gap. This is a meaningful zinc value, but the sample type remains selective surface material.

- Positive factor: Zinc is relatively strong in the new Khyber Gap exposure

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> Grading 6.52 g/t Au, 27.40 g/t Ag, 0.14% Cu and 3.82% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 17

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-16)

KSP · gold

#### Identity

- Project: KSP
- Commodity: gold
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.06
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Pins Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The Pins surface grab sample is reported at '0.06 g/t Au', which is very low gold grade and not material on its own.

- Positive factor: Gold is present in the new Pins occurrence

- Negative factor: Very low gold grade

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> a surface grab sample that graded 0.06 g/t Au, 1.2 g/t Ag, 0.01% Cu, 31.34% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 18

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-17)

KSP · silver

#### Identity

- Project: KSP
- Commodity: silver
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 1.2
- Grade Unit: g/t

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Pins Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '1.2 g/t Ag' from Pins. This is a low to modest silver value.

- Positive factor: Silver is present in the Pins grab sample

- Negative factor: Low silver grade

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> a surface grab sample that graded 0.06 g/t Au, 1.2 g/t Ag, 0.01% Cu, 31.34% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 19

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-18)

KSP · copper

#### Identity

- Project: KSP
- Commodity: copper
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 0.01
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Pins Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '0.01% Cu' at Pins. This is negligible copper grade.

- Positive factor: Copper is present in the Pins occurrence

- Negative factor: Very low copper grade

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> a surface grab sample that graded 0.06 g/t Au, 1.2 g/t Ag, 0.01% Cu, 31.34% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 20

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-19)

KSP · zinc

#### Identity

- Project: KSP
- Commodity: zinc
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Geometry

- Grade: 31.34
- Grade Unit: %

#### Classification

- Sample Type: surface
- Group ID: null

#### Location

- Location: Pins Target
- Loc. Source: document

#### QA/QC

- Laboratory: null
- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The document reports '31.34% Zn' from Pins, which is exceptionally high zinc grade and the standout assay in the release.

- Positive factor: Very high zinc grade

- Positive factor: New Zn-rich epithermal vein occurrence

- Negative factor: Surface grab sample is selective

- Negative factor: No QA/QC laboratory details disclosed

Evidence · text

> a surface grab sample that graded 0.06 g/t Au, 1.2 g/t Ag, 0.01% Cu, 31.34% Zn

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

### Fact 21

[Link to this fact](https://atlas-extractions.minestarters.com/news/mining-news--a8b30dd9-c74e-4249-8672-a3732f65700f#fact-drill-facts-20)

KSP · gold

#### Identity

- Project: KSP
- Commodity: gold
- Region: canada\_bc
- Reported Region: canada\_bc
- Ticker: SKE

#### Classification

- Deposit Type: porphyry
- Program: exploration
- Sample Type: surface
- Mining Method: open\_pit

#### Location

- Location: Bronson Corridor
- Loc. Source: document

#### QA/QC

- QP Signed: Yes
- QA/QC Methods: standards

#### Deleterious

- Deleterious Flag: No

#### Review

- Needs Review: No
- Interp. Status: scored
- Historical: No

Reasoning: The release frames the work as regional grassroots exploration and says field work has identified Au-Cu porphyry style mineralization along the Bronson Corridor. It is positive exploration context but not a completed drilling or resource milestone.

- Positive factor: Release identifies deeper Au-Cu porphyry style mineralization and epithermal veins along the Bronson Corridor

- Positive factor: Qualified Person sign-off is stated

- Negative factor: No assay laboratory or detailed QA/QC methods disclosed

- Negative factor: Early-stage regional assessment

Evidence · text

> field work this season at KSP has successfully identified a continuum of mineralization styles including deeper Au-Cu porphyry style mineralization

#### Tags used in scoring

**No QA/QC Disclosure**

Polarity: negative

Definition: Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.

Why it applies: qaqc\_disclosed is not true

**Cut-off Undisclosed**

Polarity: negative

Definition: High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff\_grade was stated

## How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.