Untitled mining news story
Original announcement by research on
- Company
- Vizsla Silver Corp.
- Ticker
- VZLA
- Exchange
- TSX
- Region
- Sinaloa, Mexico
- Primary commodity
- Silver
- Secondary commodities
- Gold, Lead, Zinc
- Document categories
- Drill results, Other
- Extracted
- 2026-11-06 14:23:17 UTC
Analysis by Minestarters Atlas
Atlas analysis published:
Minestarters Atlas analysis
Summary
Vizsla Silver reported a new high-grade discovery at the Animas vein system in hole AM-25-90 at the Panuco project in Mexico. The hole intersected 897 g/t AgEq over 5.85 m true width, including 2,256 g/t AgEq over 1.13 m true width, and the company said follow-up drilling is planned. The release also disclosed QA/QC procedures, certified laboratories, and Qualified Person approval.
Reasoning: The release reports a new discovery hole with very high silver-equivalent grades over meaningful true widths, which is materially positive for exploration upside. Confidence is strong because the assay table, true widths, QA/QC and equivalence assumptions are all disclosed, though the result is still an early-stage single-hole discovery.
Positive factors
- New high-grade discovery reported from hole AM-25-90
- True width disclosed for all highlighted intervals
- QA/QC and Qualified Person sign-off disclosed
- Metal equivalent assumptions disclosed in note
Negative factors
- AgEq relies on recoveries from a prior 2022 release
- Discovery is early-stage exploration and follow-up drilling is still planned
- Mineralization occurs below historic mine workings, so continuity remains unproven beyond one hole
Facts used in scoring: 32
Classification and evidence
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The release states "5.85 metres true width (mTW)" and the table includes "Estimated True width (m)".
Evidence · text
“5.85 metres true width (mTW)”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release names certified laboratories, QA/QC protocols, and a Qualified Person.
Evidence · text
“Control samples comprising certified reference samples, duplicates and blank samples”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The interval includes exceptionally high grades such as "2,256 g/t AgEq over 1.13 mTW" and "14.10 g/t gold".
Evidence · text
“2,256 g/t AgEq over 1.13 mTW”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Several assay rows are headline downhole intervals, and the release also notes a broader vein package from 118.70 to 138.55 down the hole.
Evidence · text
“from 118.70 to 138.55 down the hole”
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: The discovery is positioned "approximately six kilometers to the northeast of the Copala resource area" and along the Animas vein system.
Evidence · text
“approximately six kilometers to the northeast of the Copala resource area”
Extracted facts
Stored fact records: 32. Some facts used in scoring do not have a stored record.
Drill Results (32)
AM-25-90along the Animas vein · silverGrade: 653Grade Unit: g/tIntercept: 7.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 653
- Grade Unit
- g/t
- Intercept
- 7.8 m
- True Width
- 5.85 m
- From
- 118.7 m
- To
- 126.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:118.7-126.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 897
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: This is a strong silver intercept with a substantial true width and strong polymetallic tenor. The result is materially positive, but novelty is tempered because the AgEq basis references prior metallurgical recoveries from 2022.
Positive factors
- High silver grade over a 5.85 m true width
- Part of a new discovery hole below historic workings
- True width and AgEq assumptions disclosed
- QA/QC and QP sign-off disclosed
Negative factors
- AgEq uses recovery assumptions from a prior 2022 metallurgical release
- Single-hole discovery so continuity is not yet demonstrated
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · goldGrade: 4.26Grade Unit: g/tIntercept: 7.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 4.26
- Grade Unit
- g/t
- Intercept
- 7.8 m
- True Width
- 5.85 m
- From
- 118.7 m
- To
- 126.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:118.7-126.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 897
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: The 4.26 g/t gold component is strong in an epithermal vein setting and materially supports the discovery hole. Confidence is high because the interval, true width and QA/QC are clearly disclosed, but the value is still exploration-stage and tied to an AgEq calculation using older recovery assumptions.
Positive factors
- Gold grade accompanies the broad silver intercept
- True width disclosed
- Discovery hole context below historic mine workings
Negative factors
- AgEq assumptions are based on prior metallurgical recoveries
- Single-hole result so persistence is unproven
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · leadGrade: 0.02Grade Unit: %Intercept: 7.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 7.8 m
- True Width
- 5.85 m
- From
- 118.7 m
- To
- 126.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:118.7-126.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 897
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Lead is present but at a low grade, so it is mainly supportive of the silver-equivalent calculation rather than a standalone value driver. The fact remains useful because it is part of the disclosed assay suite and the interval is fully documented.
Positive factors
- Lead is part of the reported polymetallic metal basket supporting AgEq
- Interval is well constrained by true width and collar data
Negative factors
- Lead grade itself is very low
- AgEq assumptions are derived from a prior 2022 metallurgical release
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · zincGrade: 0.04Grade Unit: %Intercept: 7.8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 7.8 m
- True Width
- 5.85 m
- From
- 118.7 m
- To
- 126.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 118.7 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:118.7-126.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 897
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Zinc is a minor component of the interval and adds little standalone economic weight at the reported grade. Its main relevance is as a contributor to the stated silver-equivalent value.
Positive factors
- Zinc is included in the reported polymetallic package and in the AgEq calculation
Negative factors
- Zinc grade is very low
- AgEq assumptions are based on prior metallurgical recoveries
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.85
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · silverGrade: 1190Grade Unit: g/tIntercept: 1.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 1190
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:119.75-121.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: This is a very high-grade silver subinterval and clearly material on a grade basis. It is strong but not a bonanza-width result because the interval is only 1.31 m true width.
Positive factors
- Very high silver grade over a narrow but clearly reported true width
- High-grade subinterval within the discovery hole
- QA/QC and true width disclosed
Negative factors
- AgEq assumptions are from a prior 2022 metallurgical release
- Narrower width reduces scale versus the broader parent interval
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · goldGrade: 4Grade Unit: g/tIntercept: 1.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:119.75-121.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: The gold grade is respectable and adds value to the already strong silver subinterval, but the narrow true width limits standalone scale. It is still a meaningful high-grade component of the discovery hole.
Positive factors
- Gold accompanies a very high-grade silver subinterval
- True width disclosed
Negative factors
- Narrow width limits scale
- AgEq assumptions are based on prior 2022 metallurgical recoveries
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · leadGrade: 0.02Grade Unit: %Intercept: 1.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:119.75-121.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Lead is present only at trace levels in this narrow subinterval and is mainly relevant as an input to the AgEq calculation. It does not materially change the investment case by itself.
Positive factors
- Lead is part of the assay suite for the subinterval
Negative factors
- Very low lead grade
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · zincGrade: 0.04Grade Unit: %Intercept: 1.75 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Hole Depth
- 201 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:119.75-121.5
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Zinc is only a trace component here and does not materially affect the economics on its own. Its relevance is chiefly in the silver-equivalent calculation.
Positive factors
- Zinc is included in the assay suite
Negative factors
- Very low zinc grade
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · silverGrade: 1398Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 1398
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Hole Depth
- 201 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:124.35-125.85
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: This is an exceptional silver hit and the standout interval in the release. The width is narrow, but the grade is high enough to be highly material in an underground vein context.
Positive factors
- Exceptional silver grade over a short true width
- Highest-grade interval in the release
- True width disclosed
Negative factors
- Very narrow width limits bulk scale
- AgEq assumptions are based on a prior 2022 metallurgical release
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · goldGrade: 14.1Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 14.1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Hole Depth
- 201 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:124.35-125.85
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: The 14.10 g/t gold subinterval is exceptionally strong and materially enhances the discovery hole. Despite the narrow width, the grade is highly compelling in an underground vein setting.
Positive factors
- Very high gold grade over a short true width
- Complements the top silver interval in the release
- True width disclosed
Negative factors
- Narrow width limits bulk tonnage relevance
- AgEq assumptions are based on a prior 2022 metallurgical release
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · leadGrade: 0.04Grade Unit: %Intercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Hole Depth
- 201 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:124.35-125.85
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Lead is only a trace component in the highest-grade subinterval. It does not drive value directly, but it is relevant to the silver-equivalent disclosure.
Positive factors
- Lead is part of the polymetallic assay suite
Negative factors
- Lead grade remains very low
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · zincGrade: 0.09Grade Unit: %Intercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Hole Depth
- 201 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:124.35-125.85
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Zinc is present only in small amounts here and is mainly useful as a constituent of the reported AgEq calculation. It is not a standalone economic driver at this grade.
Positive factors
- Zinc is disclosed as part of the interval
Negative factors
- Zinc grade is low
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · silverGrade: 457Grade Unit: g/tIntercept: 3.1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 457
- Grade Unit
- g/t
- Intercept
- 3.1 m
- True Width
- 2.6 m
- From
- 131.2 m
- To
- 134.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 131.2 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:131.2-134.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 568
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: This is a solid silver interval with useful width, but it is less compelling than the higher-grade subzones reported above. It still contributes positively to the overall discovery picture.
Positive factors
- Broad silver interval with a clearly stated true width
- Adds support to the discovery envelope
Negative factors
- Grade is materially lower than the top subintervals
- AgEq assumptions are from a prior 2022 metallurgical release
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · goldGrade: 2Grade Unit: g/tIntercept: 3.1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 3.1 m
- True Width
- 2.6 m
- From
- 131.2 m
- To
- 134.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 131.2 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:131.2-134.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 568
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: The 2.00 g/t gold interval is meaningful but not exceptional. It supports the broader mineralized envelope rather than standing out as the headline result.
Positive factors
- Gold present over a broader interval
- True width disclosed
Negative factors
- Grade is modest relative to the headline subintervals
- AgEq assumptions are based on prior 2022 metallurgical recoveries
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · leadGrade: 0.08Grade Unit: %Intercept: 3.1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 3.1 m
- True Width
- 2.6 m
- From
- 131.2 m
- To
- 134.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 131.2 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:131.2-134.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 568
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Lead remains a minor constituent in this broader interval and is only tangentially relevant through the AgEq calculation.
Positive factors
- Lead is part of the assay suite
Negative factors
- Trace-level lead
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · zincGrade: 0.18Grade Unit: %Intercept: 3.1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 3.1 m
- True Width
- 2.6 m
- From
- 131.2 m
- To
- 134.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 131.2 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:131.2-134.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 568
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Zinc is a minor component in this interval and does not materially alter the economic significance on its own. It is relevant primarily because it contributes to the AgEq value.
Positive factors
- Zinc is included in the polymetallic interval
Negative factors
- Grade is low
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · silverGrade: 814Grade Unit: g/tIntercept: 1.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 814
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:132.0-133.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: This is a strong silver subinterval and a clear positive within the discovery hole. The width is narrow, so the result is better viewed as a high-grade shoot than as a bulk-tonnage interval.
Positive factors
- High silver grade over a very narrow true width
- Supports the broader discovery envelope
- True width disclosed
Negative factors
- Narrow width limits bulk tonnage relevance
- AgEq assumptions are based on prior 2022 metallurgical recoveries
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · goldGrade: 3.42Grade Unit: g/tIntercept: 1.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 3.42
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:132.0-133.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: The gold grade is supportive and meaningful, but the very narrow width limits the interval's bulk significance. It remains a positive component of the discovery result.
Positive factors
- Gold accompanies the high-grade silver subinterval
- True width disclosed
Negative factors
- Narrow width limits scale
- AgEq assumptions are based on prior 2022 metallurgical recoveries
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · leadGrade: 0.11Grade Unit: %Intercept: 1.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:132.0-133.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Lead is a minor constituent in this interval and is relevant mainly as a contributor to the equivalent calculation.
Positive factors
- Lead is included in the assay suite
Negative factors
- Trace-level lead
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
AM-25-90along the Animas vein · zincGrade: 0.24Grade Unit: %Intercept: 1.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- AM-25-90
- Project
- along the Animas vein
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Hole Depth
- 201 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Program
- exploration
- Sample Type
- drill
- Group ID
- AM-25-90:132.0-133.3
- Mining Method
- underground
Location
- Location
- Animas
- Easting
- 409080
- Northing
- 2589578
- CRS
- WGS84, Zone 13
- Elevation
- 810 m
- Azimuth
- 76.6 °
- Dip
- 87 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- lead, zinc
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2022-02-17T00:00:00.000Z
Reasoning: Zinc remains only a minor constituent in this subinterval and does not materially drive value by itself.
Positive factors
- Zinc is included in the interval
Negative factors
- Low zinc grade
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: deleterious_flag is true
Stale Data Re Releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
IncludesPanuco · silverGrade: 1190Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 1190
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:119.75-121.5
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 1190 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 2082.5 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1190 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 119.75 121.50 1.75 1.31 1,190 4.00 0.02 0.04 1,379”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · goldGrade: 4Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:119.75-121.5
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 4 g/t gold is moderate against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 7.0 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 119.75 121.50 1.75 1.31 1,190 4.00 0.02 0.04 1,379”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · leadGrade: 0.02Grade Unit: %Intercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:119.75-121.5
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 0.02 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 119.75 121.50 1.75 1.31 1,190 4.00 0.02 0.04 1,379”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · zincGrade: 0.04Grade Unit: %Intercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.75 m
- True Width
- 1.31 m
- From
- 119.75 m
- To
- 121.5 m
- Intercept Depth
- 119.75 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:119.75-121.5
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1379
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 119.75 121.50 1.75 1.31 1,190 4.00 0.02 0.04 1,379”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.31
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · silverGrade: 1398Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 1398
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:124.35-125.85
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 1398 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 2097.0 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1398 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 124.35 125.85 1.50 1.13 1,398 14.10 0.04 0.09 2,256”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · goldGrade: 14.1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 14.1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:124.35-125.85
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 14.1 g/t gold is strong against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 21.1 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 14.1 g/t gold is strong on the underground mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 124.35 125.85 1.50 1.13 1,398 14.10 0.04 0.09 2,256”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · leadGrade: 0.04Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:124.35-125.85
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 0.04 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 124.35 125.85 1.50 1.13 1,398 14.10 0.04 0.09 2,256”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · zincGrade: 0.09Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.13 m
- From
- 124.35 m
- To
- 125.85 m
- Intercept Depth
- 124.35 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:124.35-125.85
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2256
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 0.09 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 124.35 125.85 1.50 1.13 1,398 14.10 0.04 0.09 2,256”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.13
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · silverGrade: 814Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- silver
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 814
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:132-133.3
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 814 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 1058.2 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 814 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 132.00 133.30 1.30 1.09 814 3.42 0.11 0.24 1,000”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · goldGrade: 3.42Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- gold
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 3.42
- Grade Unit
- g/t
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:132-133.3
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 3.42 g/t gold is weak against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 4.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 132.00 133.30 1.30 1.09 814 3.42 0.11 0.24 1,000”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · leadGrade: 0.11Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- lead
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:132-133.3
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 0.11 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.11 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 132.00 133.30 1.30 1.09 814 3.42 0.11 0.24 1,000”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesPanuco · zincGrade: 0.24Grade Unit: %Intercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Panuco
- Commodity
- zinc
- Region
- mexico
- Reported Region
- mexico
- Ticker
- VZLA
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 1.3 m
- True Width
- 1.09 m
- From
- 132 m
- To
- 133.3 m
- Intercept Depth
- 132 m
Classification
- Deposit Type
- epithermal
- Sample Type
- drill
- Group ID
- Includes:132-133.3
- Mining Method
- underground
Location
- CRS
- WGS84, Zone 13
QA/QC
- Laboratory
- ALS and SGS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1000
- Metal Eq. Unit
- g/t Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Reasoning: Expanded from assay table. 0.24 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.24 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“Includes 132.00 133.30 1.30 1.09 814 3.42 0.11 0.24 1,000”
Context: Table 1: Downhole drill intersections from hole AM-25-90. · Includes · Columns: Drillhole | From (m) | To (m) | Downhole Length (m) | Estimated True width (m) | Ag (g/t) | Au (g/t) | Pb % | Zn % | AgEq (g/t) | Vein | |
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.09
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut Off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.