Mogotes Closes Season at Filo Sur with New Porphyry Targets at Luz del Sol and Cuenca; Plans 20,000 m of Drilling for 2026-2027
Original announcement by tmx on
- Company
- Mogotes Metals Inc.
- Ticker
- MOG
- Exchange
- TSX
- Region
- Argentina and Chile
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Molybdenum, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-18 10:30:35 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Mogotes Metals Inc. has announced final results from its 2025–2026 field season at the Filo Sur project in Argentina and Chile, highlighting two new discoveries: the Albor breccia with a high-grade intercept of 180 m at 0.98% CuEq, and the Cruz del Sur gold-copper porphyry. The company also identified new porphyry targets at Luz del Sol and Cuenca, which will be tested in a significantly expanded 20,000-metre drill program planned for 2026–2027. These results underscore the project's potential within the prospective Vicuña district.
Reasoning: Mogotes Metals Inc. reports highly successful first-season drill results at its Filo Sur project, including two new discoveries and several high-grade intercepts. The identification of new porphyry targets and a planned tripling of the drill program for the next season indicate significant exploration potential and positive momentum for the project.
Positive factors
- Two new discoveries made in the first season of drilling
- High-grade intercept of 180 m at 0.98% CuEq, including 9 m at 2.84% CuEq
- Identification of new porphyry targets (Luz del Sol, Cuenca, Meseta)
- Significant increase in planned drilling for the next season (20,000 m)
- QA/QC procedures are disclosed and a Qualified Person has approved the disclosure
Negative factors
- True widths are not yet determined for reported intercepts
- Some reported grades are described as 'not economic' but are considered vectors
- No metallurgical test work has been completed on the project yet
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 72
Extracted facts
Stored fact records: 72. Some facts used in scoring do not have a stored record.
Drill Results (72)
FS_DDH_016discovered a large gold-copper porphyry · copperGrade: 0.51Grade Unit: %Intercept: 180 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 180 m
- From
- 108 m
- To
- 288 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:108-288
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade over a significant width, indicating a valuable part of the new Albor breccia discovery.
Positive factors
- Strong copper grade for a porphyry deposit (above 75th percentile)
- Significant intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_016discovered a large gold-copper porphyry · goldGrade: 0.37Grade Unit: g/tIntercept: 180 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 180 m
- From
- 108 m
- To
- 288 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:108-288
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a moderate gold grade over a significant width, contributing to the new Albor breccia discovery.
Positive factors
- Moderate gold grade for a porphyry deposit
- Significant intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_016discovered a large gold-copper porphyry · silverGrade: 2.8Grade Unit: g/tIntercept: 180 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 2.8
- Grade Unit
- g/t
- Intercept
- 180 m
- From
- 108 m
- To
- 288 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:108-288
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low silver grade over a significant width, contributing to the new Albor breccia discovery.
Positive factors
- Silver present as a byproduct
- Significant intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_016discovered a large gold-copper porphyry · molybdenumGrade: 119Grade Unit: ppmIntercept: 180 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 119
- Grade Unit
- ppm
- Intercept
- 180 m
- From
- 108 m
- To
- 288 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:108-288
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.98
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low molybdenum grade over a significant width, contributing to the new Albor breccia discovery.
Positive factors
- Molybdenum present as a byproduct
- Significant intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_016discovered a large gold-copper porphyry · copperGrade: 0.9Grade Unit: %Intercept: 58 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.9
- Grade Unit
- %
- Intercept
- 58 m
- From
- 111 m
- To
- 169 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:111-169
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.77
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows an exceptional copper grade over a strong width, indicating a high-grade zone within the new Albor breccia discovery.
Positive factors
- Exceptional copper grade for a porphyry deposit (above 75th percentile)
- Strong intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“0.90”
Context: 58.0
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · goldGrade: 0.7Grade Unit: g/tIntercept: 58 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 58 m
- From
- 111 m
- To
- 169 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:111-169
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.77
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a strong gold grade over a strong width, indicating a high-grade zone within the new Albor breccia discovery.
Positive factors
- Strong gold grade for a porphyry deposit
- Strong intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · silverGrade: 3.6Grade Unit: g/tIntercept: 58 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 3.6
- Grade Unit
- g/t
- Intercept
- 58 m
- From
- 111 m
- To
- 169 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:111-169
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.77
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low silver grade over a strong width, contributing to the new Albor breccia discovery.
Positive factors
- Silver present as a byproduct
- Strong intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · molybdenumGrade: 228Grade Unit: ppmIntercept: 58 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 228
- Grade Unit
- ppm
- Intercept
- 58 m
- From
- 111 m
- To
- 169 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:111-169
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.77
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low molybdenum grade over a strong width, contributing to the new Albor breccia discovery.
Positive factors
- Molybdenum present as a byproduct
- Strong intercept length
- Part of a new discovery (Albor breccia)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · copperGrade: 0.54Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 7 m
- From
- 188 m
- To
- 195 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:188-195
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.01
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a moderate copper grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Moderate copper grade for a porphyry deposit (between 25th and 75th percentile)
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · goldGrade: 0.38Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 188 m
- To
- 195 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:188-195
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.01
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a moderate gold grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Moderate gold grade for a porphyry deposit
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · silverGrade: 1.8Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 188 m
- To
- 195 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:188-195
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.01
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low silver grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Silver present as a byproduct
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · molybdenumGrade: 119Grade Unit: ppmIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 119
- Grade Unit
- ppm
- Intercept
- 7 m
- From
- 188 m
- To
- 195 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:188-195
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.01
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low molybdenum grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Molybdenum present as a byproduct
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · copperGrade: 0.91Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.91
- Grade Unit
- %
- Intercept
- 7 m
- From
- 236 m
- To
- 243 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:236-243
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.29
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows an exceptional copper grade over a narrow width, indicating a high-grade zone within the new Albor breccia discovery.
Positive factors
- Exceptional copper grade for a porphyry deposit (above 75th percentile)
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“0.91”
Context: 7.0
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · goldGrade: 0.16Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 236 m
- To
- 243 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:236-243
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.29
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a weak gold grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Part of a new discovery (Albor breccia)
Negative factors
- Weak gold grade for a porphyry deposit
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · silverGrade: 11.9Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 11.9
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 236 m
- To
- 243 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:236-243
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.29
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low silver grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Silver present as a byproduct
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · molybdenumGrade: 143Grade Unit: ppmIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 143
- Grade Unit
- ppm
- Intercept
- 7 m
- From
- 236 m
- To
- 243 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:236-243
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.29
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low molybdenum grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Molybdenum present as a byproduct
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · copperGrade: 1.32Grade Unit: %Intercept: 9 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.32
- Grade Unit
- %
- Intercept
- 9 m
- From
- 276 m
- To
- 285 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:276-285
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.84
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows an exceptional copper grade over a narrow width, indicating a very high-grade zone within the new Albor breccia discovery.
Positive factors
- Exceptional copper grade for a porphyry deposit (above 75th percentile)
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“1.32”
Context: 9.0
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · goldGrade: 1.34Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.34
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 276 m
- To
- 285 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:276-285
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.84
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a strong gold grade over a narrow width, indicating a high-grade zone within the new Albor breccia discovery.
Positive factors
- Strong gold grade for a porphyry deposit
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · silverGrade: 7.5Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 7.5
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 276 m
- To
- 285 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:276-285
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.84
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low silver grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Silver present as a byproduct
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_016discovered a large gold-copper porphyry · molybdenumGrade: 105Grade Unit: ppmIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_016
- Project
- discovered a large gold-copper porphyry
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 105
- Grade Unit
- ppm
- Intercept
- 9 m
- From
- 276 m
- To
- 285 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_016:276-285
- Mining Method
- open_pit
Location
- Location
- Albor
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.84
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low molybdenum grade over a narrow width, contributing to the new Albor breccia discovery.
Positive factors
- Molybdenum present as a byproduct
- Part of a new discovery (Albor breccia)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_006Filo Sur · copperGrade: 0.07Grade Unit: %Intercept: 308 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 308 m
- From
- 108 m
- To
- 416 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:108-416
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.46
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a weak copper grade over a very long width, indicating a significant new discovery at the Cruz del Sur porphyry, but with low copper concentration.
Positive factors
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Weak copper grade for a porphyry deposit (below 25th percentile)
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_006Filo Sur · goldGrade: 0.35Grade Unit: g/tIntercept: 308 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 308 m
- From
- 108 m
- To
- 416 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:108-416
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.46
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very long width, indicating a significant new discovery at the Cruz del Sur porphyry.
Positive factors
- Moderate gold grade for a porphyry deposit
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_006Filo Sur · silverGrade: 0.6Grade Unit: g/tIntercept: 308 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 308 m
- From
- 108 m
- To
- 416 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:108-416
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.46
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low silver grade over a very long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Silver present as a byproduct
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_006Filo Sur · molybdenumGrade: 52Grade Unit: ppmIntercept: 308 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 52
- Grade Unit
- ppm
- Intercept
- 308 m
- From
- 108 m
- To
- 416 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:108-416
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.46
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low molybdenum grade over a very long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Molybdenum present as a byproduct
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_006Filo Sur · copperGrade: 0.09Grade Unit: %Intercept: 22 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 22 m
- From
- 192 m
- To
- 214 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:192-214
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a weak copper grade over a moderate width, indicating a high-grade zone within the new Cruz del Sur porphyry discovery, but with low copper concentration.
Positive factors
- Moderate intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Weak copper grade for a porphyry deposit (below 25th percentile)
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_006Filo Sur · goldGrade: 0.8Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 192 m
- To
- 214 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:192-214
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a strong gold grade over a moderate width, highlighting a high-grade zone within the new Cruz del Sur porphyry discovery.
Positive factors
- Strong gold grade for a porphyry deposit
- Moderate intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_006Filo Sur · silverGrade: 0.9Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 192 m
- To
- 214 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:192-214
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low silver grade over a moderate width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Silver present as a byproduct
- Moderate intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_006Filo Sur · molybdenumGrade: 151Grade Unit: ppmIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 151
- Grade Unit
- ppm
- Intercept
- 22 m
- From
- 192 m
- To
- 214 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:192-214
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low molybdenum grade over a moderate width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Molybdenum present as a byproduct
- Moderate intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_006Filo Sur · copperGrade: 0.1Grade Unit: %Intercept: 334 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 334 m
- From
- 456 m
- To
- 790 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:456-790
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a weak copper grade over a very long width, indicating a significant new discovery at the Cruz del Sur porphyry, but with low copper concentration.
Positive factors
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Weak copper grade for a porphyry deposit (below 25th percentile)
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_006Filo Sur · goldGrade: 0.32Grade Unit: g/tIntercept: 334 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 334 m
- From
- 456 m
- To
- 790 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:456-790
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very long width, indicating a significant new discovery at the Cruz del Sur porphyry.
Positive factors
- Moderate gold grade for a porphyry deposit
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_006Filo Sur · silverGrade: 0.8Grade Unit: g/tIntercept: 334 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 334 m
- From
- 456 m
- To
- 790 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:456-790
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low silver grade over a very long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Silver present as a byproduct
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_006Filo Sur · molybdenumGrade: 37Grade Unit: ppmIntercept: 334 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_006
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 37
- Grade Unit
- ppm
- Intercept
- 334 m
- From
- 456 m
- To
- 790 m
- Intercept Depth
- 108 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_006:456-790
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low molybdenum grade over a very long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Molybdenum present as a byproduct
- Very long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_007Filo Sur · copperGrade: 0.02Grade Unit: %Intercept: 124 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 124 m
- From
- 24 m
- To
- 148 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:24-148
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a weak copper grade over a long width, indicating a significant new discovery at the Cruz del Sur porphyry, but with low copper concentration.
Positive factors
- Long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Weak copper grade for a porphyry deposit (below 25th percentile)
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_007Filo Sur · goldGrade: 0.51Grade Unit: g/tIntercept: 124 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 124 m
- From
- 24 m
- To
- 148 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:24-148
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a long width, indicating a significant new discovery at the Cruz del Sur porphyry.
Positive factors
- Moderate gold grade for a porphyry deposit
- Long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_007Filo Sur · silverGrade: 0.4Grade Unit: g/tIntercept: 124 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 124 m
- From
- 24 m
- To
- 148 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:24-148
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low silver grade over a long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Silver present as a byproduct
- Long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_007Filo Sur · zincGrade: 1752Grade Unit: ppmIntercept: 124 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- zinc
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1752
- Grade Unit
- ppm
- Intercept
- 124 m
- From
- 24 m
- To
- 148 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:24-148
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.61
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a moderate zinc grade over a long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Moderate zinc grade for a porphyry deposit
- Long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_007Filo Sur · copperGrade: 0.06Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 8 m
- From
- 76 m
- To
- 84 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:76-84
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.03
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a weak copper grade over a narrow width, indicating a high-grade zone within the new Cruz del Sur porphyry discovery, but with low copper concentration.
Positive factors
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Weak copper grade for a porphyry deposit (below 25th percentile)
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · goldGrade: 0.89Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 76 m
- To
- 84 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:76-84
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.03
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a strong gold grade over a narrow width, highlighting a high-grade zone within the new Cruz del Sur porphyry discovery.
Positive factors
- Strong gold grade for a porphyry deposit
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · silverGrade: 0.5Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 76 m
- To
- 84 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:76-84
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.03
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low silver grade over a narrow width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Silver present as a byproduct
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · zincGrade: 1129Grade Unit: ppmIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- zinc
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1129
- Grade Unit
- ppm
- Intercept
- 8 m
- From
- 76 m
- To
- 84 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:76-84
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.03
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a moderate zinc grade over a narrow width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Moderate zinc grade for a porphyry deposit
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · copperGrade: 0.01Grade Unit: %Intercept: 14 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 14 m
- From
- 108 m
- To
- 122 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:108-122
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a weak copper grade over a narrow width, indicating a high-grade zone within the new Cruz del Sur porphyry discovery, but with low copper concentration.
Positive factors
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Weak copper grade for a porphyry deposit (below 25th percentile)
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · goldGrade: 1.31Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.31
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 108 m
- To
- 122 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:108-122
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a strong gold grade over a narrow width, highlighting a high-grade zone within the new Cruz del Sur porphyry discovery.
Positive factors
- Strong gold grade for a porphyry deposit
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · silverGrade: 0.3Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 108 m
- To
- 122 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:108-122
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a low silver grade over a narrow width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Silver present as a byproduct
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · zincGrade: 3711Grade Unit: ppmIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- zinc
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 3711
- Grade Unit
- ppm
- Intercept
- 14 m
- From
- 108 m
- To
- 122 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:108-122
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 1
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This 'including' interval shows a strong zinc grade over a narrow width, highlighting a high-grade zone within the new Cruz del Sur porphyry discovery.
Positive factors
- Strong zinc grade for a porphyry deposit
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Narrow intercept length
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“"Including" intervals are calculated at a cut-off of 1.0% CuEq and may include up to 6.0 m of consecutive internal dilution.”
FS_DDH_007Filo Sur · copperGrade: 0.03Grade Unit: %Intercept: 116 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 116 m
- From
- 174 m
- To
- 290 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:174-290
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a weak copper grade over a long width, indicating a significant new discovery at the Cruz del Sur porphyry, but with low copper concentration.
Positive factors
- Long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- Weak copper grade for a porphyry deposit (below 25th percentile)
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_007Filo Sur · goldGrade: 0.24Grade Unit: g/tIntercept: 116 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 116 m
- From
- 174 m
- To
- 290 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:174-290
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Moderate gold grade for a porphyry deposit
- Long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Reported drill intervals are length-weighted downhole composites calculated at a cut-off grade of 0.20% CuEq. Composite intervals begin and end with samples grading at or above cut-off and may include up to 6.0 m of consecutive internal dilution below cut-off”
FS_DDH_007Filo Sur · silverGrade: 0.3Grade Unit: g/tIntercept: 116 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 116 m
- From
- 174 m
- To
- 290 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- FS_DDH_007:174-290
- Mining Method
- open_pit
Location
- Location
- Cruz del Sur
- CRS
- WGS 84 / UTM Zone 19S
- Loc. Source
- document
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.2
- Cutoff Unit
- % CuEq
- Dilution Disclosed
- Yes
- Max Dilution
- 6 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: This intercept includes a low silver grade over a long width, contributing to the new Cruz del Sur porphyry discovery.
Positive factors
- Silver present as a byproduct
- Long intercept length
- Part of a new discovery (Cruz del Sur porphyry)
Negative factors
- True width not determined
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“Intercepts are reported as downhole intervals; insufficient information is currently available to determine true widths.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“The scientific and technical disclosure for the Filo Sur project included in this news release has been reviewed and approved by Carl Schnell, MAIG, the Qualified Person as defined by National Instrument 43-101.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: cutoff_grade and internal dilution are both stated
FS_DDH_007Filo Sur · molybdenumGrade: 48Grade Unit: ppmIntercept: 116 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_007
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 48
- Grade Unit
- ppm
- Intercept
- 116 m
- From
- 174 m
- To
- 290 m
- Intercept Depth
- 174 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_007:174-290
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CUEQ
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table: 48 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“48”
Context: FS_DDH_007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_013Filo Sur · copperGrade: 0.21Grade Unit: %Intercept: 18 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_013
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 18 m
- From
- 216 m
- To
- 234 m
- Intercept Depth
- 216 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_013:216-234
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 3.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: FS_DDH_013
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_013Filo Sur · goldGrade: 0.02Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_013
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 216 m
- To
- 234 m
- Intercept Depth
- 216 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_013:216-234
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: FS_DDH_013
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_013Filo Sur · silverGrade: 1.8Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_013
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 216 m
- To
- 234 m
- Intercept Depth
- 216 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_013:216-234
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 1.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 32.4 g/t·m is below.
Negative factors
- 1.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.8”
Context: FS_DDH_013
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_013Filo Sur · molybdenumGrade: 1Grade Unit: ppmIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_013
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1
- Grade Unit
- ppm
- Intercept
- 18 m
- From
- 216 m
- To
- 234 m
- Intercept Depth
- 216 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_013:216-234
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table: 1 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“1”
Context: FS_DDH_013
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_015Filo Sur · copperGrade: 0.16Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_015
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 24 m
- From
- 179 m
- To
- 203 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_015:179-203
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 3.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: FS_DDH_015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_015Filo Sur · goldGrade: 0.02Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_015
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 179 m
- To
- 203 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_015:179-203
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: FS_DDH_015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_015Filo Sur · silverGrade: 1.8Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_015
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 179 m
- To
- 203 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_015:179-203
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 1.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 43.2 g/t·m is below.
Negative factors
- 1.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.8”
Context: FS_DDH_015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
FS_DDH_015Filo Sur · molybdenumGrade: 40Grade Unit: ppmIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- FS_DDH_015
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 40
- Grade Unit
- ppm
- Intercept
- 24 m
- From
- 179 m
- To
- 203 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- FS_DDH_015:179-203
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table: 40 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“40”
Context: FS_DDH_015
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · copperGrade: 0.04Grade Unit: %Intercept: 42 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:0-42
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 1.7 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: Road Cut 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · goldGrade: 0.16Grade Unit: g/tIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:0-42
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 g/t gold is weak against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 6.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: Road Cut 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · silverGrade: 0.7Grade Unit: g/tIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:0-42
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 29.4 g/t·m is below.
Negative factors
- 0.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.7”
Context: Road Cut 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · molybdenumGrade: 24Grade Unit: ppmIntercept: 42 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 24
- Grade Unit
- ppm
- Intercept
- 42 m
- From
- 0 m
- To
- 42 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:0-42
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table: 24 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“24”
Context: Road Cut 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · copperGrade: 0.22Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 6 m
- From
- 24 m
- To
- 30 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:24-30
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.22 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 1.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.22”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · goldGrade: 0.85Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 24 m
- To
- 30 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:24-30
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.85 g/t gold is strong against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 5.1 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.85 g/t gold is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.85”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · silverGrade: 0.8Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 24 m
- To
- 30 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:24-30
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.8 g/t·m is below.
Negative factors
- 0.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.8”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 1Filo Sur · molybdenumGrade: 5Grade Unit: ppmIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- Road Cut 1
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 5
- Grade Unit
- ppm
- Intercept
- 6 m
- From
- 24 m
- To
- 30 m
- Intercept Depth
- 24 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 1:24-30
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table: 5 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“5”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 2Filo Sur · copperGrade: 0.05Grade Unit: %Intercept: 123.4 mView all detailsHide details
Identity
- Hole ID
- Road Cut 2
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 123.4 m
- From
- 0 m
- To
- 123.4 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 2:0-123.4
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 6.2 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: Road Cut 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 2Filo Sur · goldGrade: 0.32Grade Unit: g/tIntercept: 123.4 mView all detailsHide details
Identity
- Hole ID
- Road Cut 2
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 123.4 m
- From
- 0 m
- To
- 123.4 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 2:0-123.4
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.32 g/t gold is moderate against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 39.5 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.32”
Context: Road Cut 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 2Filo Sur · silverGrade: 1.8Grade Unit: g/tIntercept: 123.4 mView all detailsHide details
Identity
- Hole ID
- Road Cut 2
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 123.4 m
- From
- 0 m
- To
- 123.4 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 2:0-123.4
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 1.8 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 222.1 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.8”
Context: Road Cut 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 2Filo Sur · molybdenumGrade: 18Grade Unit: ppmIntercept: 123.4 mView all detailsHide details
Identity
- Hole ID
- Road Cut 2
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 18
- Grade Unit
- ppm
- Intercept
- 123.4 m
- From
- 0 m
- To
- 123.4 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 2:0-123.4
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table: 18 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“18”
Context: Road Cut 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 3Filo Sur · copperGrade: 0.04Grade Unit: %Intercept: 61.7 mView all detailsHide details
Identity
- Hole ID
- Road Cut 3
- Project
- Filo Sur
- Commodity
- copper
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 61.7 m
- From
- 0 m
- To
- 61.7 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 3:0-61.7
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 2.5 %·m is below.
Negative factors
- 0.04 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: Road Cut 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 3Filo Sur · goldGrade: 0.19Grade Unit: g/tIntercept: 61.7 mView all detailsHide details
Identity
- Hole ID
- Road Cut 3
- Project
- Filo Sur
- Commodity
- gold
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 61.7 m
- From
- 0 m
- To
- 61.7 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 3:0-61.7
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is weak against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 11.7 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: Road Cut 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 3Filo Sur · silverGrade: 1.2Grade Unit: g/tIntercept: 61.7 mView all detailsHide details
Identity
- Hole ID
- Road Cut 3
- Project
- Filo Sur
- Commodity
- silver
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 61.7 m
- From
- 0 m
- To
- 61.7 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 3:0-61.7
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table. 1.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 74.0 g/t·m is below.
Negative factors
- 1.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.2”
Context: Road Cut 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Road Cut 3Filo Sur · molybdenumGrade: 16Grade Unit: ppmIntercept: 61.7 mView all detailsHide details
Identity
- Hole ID
- Road Cut 3
- Project
- Filo Sur
- Commodity
- molybdenum
- Region
- chile
- Reported Region
- chile
- Ticker
- MOG
Geometry
- Grade
- 16
- Grade Unit
- ppm
- Intercept
- 61.7 m
- From
- 0 m
- To
- 61.7 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Road Cut 3:0-61.7
- Mining Method
- open_pit
Location
- CRS
- WGS 84 / UTM Zone 19S
QA/QC
- Laboratory
- ALS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-04T00:00:00.000Z
Reasoning: Expanded from assay table: 16 ppm molybdenum. No grade band defined for this commodity, so the score is a placeholder.
Negative factors
- No grade rubric for molybdenum; intercept not scored.
Evidence · table
“16”
Context: Road Cut 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.