Monument's Drill Assay Results Highlight Selinsing Gold Mine Expansion Potential
Original announcement by tmx on
- Company
- Monument Mining Limited
- Ticker
- MMY
- Exchange
- TSX
- Region
- Pahang State in the Central Gold Belt of Western Malaysia
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-16 10:43:12 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Monument Mining Limited announced high-grade gold assay results from its mine expansion drilling program at the Selinsing Gold Mine in Malaysia. The program, targeting the Buffalo Reef/Felda areas, successfully intersected multiple zones of gold mineralization, including bonanza grades, and extended known mineralization down-dip. These results are expected to support resource additions and conversion to reserves, with comprehensive QA/QC procedures in place.
Reasoning: Monument Mining reported high-grade gold drill results from its Selinsing Gold Mine, with several intercepts exceeding 5 g/t Au, including a bonanza grade of 13.9 g/t Au. The drilling successfully extended mineralization and identified new zones, supporting the mine expansion potential and resource conversion efforts. While some areas showed less significant results and true widths are not yet determined, the overall program indicates positive progress with robust QA/QC.
Positive factors
- High-grade gold intercepts, including bonanza grades up to 13.9 g/t Au over 1.1m, demonstrate strong mineralization.
- Drilling successfully extended mineralization down-dip and identified new zones, indicating potential for resource growth.
- The program aims to combine pits and convert resources to reserves, which is a positive step towards mine expansion.
- Comprehensive QA/QC procedures are disclosed, including certified lab, QP sign-off, and use of blanks and standards.
Negative factors
- The reported intervals are downhole lengths and do not represent true widths, which may overstate actual thickness.
- Some drill holes in the BRC3/BRC4 Gap did not yield as significant results as other areas, indicating variability.
- Assay results for a significant number of completed holes are still pending, creating uncertainty.
Facts used in scoring: 85
Classification and evidence
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.'
Evidence · text
“The reported intervals are downhole lengths and do not represent true widths. True widths will be determined once geological modelling has been completed.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including the use of certified reference materials (CRMs) and blanks, and mentions that all samples are submitted to an accredited SGS Malaysia laboratory and verified by Monument staff.
Evidence · text
“Certified reference material (CRM) is supplied by Geostats and inserted approximately every 15m, blanks are inserted approximately every 10m. All assay results are verified by Monument staff before being entered into the Microsoft access database. All QAQC data is examined to ensure validate of the results.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: The report includes a 'Qualified Person’s Statement' by Mr. Jamie Brown BSc, MAIG, Chief Managing Geologist of the Company, who is a Member of the Australian Institute of Geoscientists and a qualified person as defined by NI43-101.
Evidence · text
“The information in this report that relates to exploration results is based on information compiled and approved by Mr. Jamie Brown BSc, MAIG, Chief Managing Geologist of the Company, who is a Member of the Australian Institute of Geoscientists and a qualified person as defined by NI43-101.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling program explicitly aims to define 'down dip extensions of mineralization, outside of the existing LOM pit shell' and mentions MBRDD616 potentially extending mineralization 70m down dip.
Evidence · text
“Stage 2 Buffalo Reef/Felda Expansion drilling program focuses on potential mine expansion through definition of new mineralized zones, and down dip extensions of mineralization, outside of the existing LOM pit shell”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drilling program includes targeting 'gaps between BRC2/BRC3 and between BRC3/BRC4' to enable pits to be combined and expanded, which is characteristic of infill drilling to improve resource confidence and continuity.
Evidence · text
“Stage 1 Buffalo Reef/Felda Expansion drilling program focuses on evaluation of the potential resource increase to bridge the gaps between BRC2/BRC3 and between BRC3/BRC4 (Figure 1), to enable the pits to be combined and expanded”
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole MBRDD628 returned 1.1m @ 13.9g/t Au, which is well above the exceptional threshold for gold (5 g/t).
Evidence · table
“1.1m @ 13.9g/t Au from 94.3m”
Context: 1.1
Extracted facts
Stored fact records: 85. Some facts used in scoring do not have a stored record.
Drill Results (85)
MBRDD622Selinsing Gold Mine · goldGrade: 0.55Grade Unit: g/tIntercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 4.2 m
- From
- 37.5 m
- To
- 41.7 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 37.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:37.5-41.7
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold, which is not particularly material on its own but contributes to the overall mineralization footprint.
Negative factors
- Low grade for gold.
Evidence · table
“0.55g/t Au”
Context: 4.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.64Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 46.6 m
- To
- 61 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 46.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:46.6-61
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a moderate width, contributing to the overall mineralization but not standing out as high-grade.
Negative factors
- Low grade for gold.
Evidence · table
“0.64g/t Au”
Context: 14.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 86 m
- To
- 87 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 86 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:86-87
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.32g/t Au”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.49Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 93 m
- To
- 97 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 93 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:93-97
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a moderate width, contributing to the overall mineralization but not high-grade.
Negative factors
- Low grade for gold.
Evidence · table
“0.49g/t Au”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.6Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 100.5 m
- To
- 101.2 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 100.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:100.5-101.2
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.60g/t Au”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 122.2 m
- To
- 123.1 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 122.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:122.2-123.1
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.32g/t Au”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.84Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.84
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 138.2 m
- To
- 139.6 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 138.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:138.2-139.6
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, contributing to the overall mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.84g/t Au”
Context: 1.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.23Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 143.5 m
- To
- 144.5 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 143.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:143.5-144.5
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.23g/t Au”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 0.66Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 148.9 m
- To
- 155.4 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 148.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:148.9-155.4
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a moderate width, contributing to the overall mineralization but not standing out as high-grade.
Negative factors
- Low grade for gold.
Evidence · table
“0.66g/t Au”
Context: 6.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD622Selinsing Gold Mine · goldGrade: 1.35Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD622
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.35
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 152.9 m
- To
- 155.4 m
- Hole Depth
- 187.4 m
- Intercept Depth
- 152.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD622:152.9-155.4
Location
- Easting
- 421429.1
- Northing
- 471906.2
- Elevation
- 103.7 m
- Azimuth
- 262 °
- Dip
- 60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a narrow width, indicating a higher-grade zone within the broader intercept.
Evidence · table
“1.35g/t Au”
Context: 2.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD623Selinsing Gold Mine · goldGrade: 0.63Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 51.5 m
- To
- 53 m
- Hole Depth
- 250 m
- Intercept Depth
- 51.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD623:51.5-53
Location
- Easting
- 421449.5
- Northing
- 471439.3
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.63g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD623Selinsing Gold Mine · goldGrade: 0.28Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 56 m
- To
- 56.9 m
- Hole Depth
- 250 m
- Intercept Depth
- 56 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD623:56-56.9
Location
- Easting
- 421449.5
- Northing
- 471439.3
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.28g/t Au”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD623Selinsing Gold Mine · goldGrade: 1.25Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 91.3 m
- To
- 93.9 m
- Hole Depth
- 250 m
- Intercept Depth
- 91.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD623:91.3-93.9
Location
- Easting
- 421449.5
- Northing
- 471439.3
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating a mineralized zone.
Evidence · table
“1.25g/t Au”
Context: 2.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD623Selinsing Gold Mine · goldGrade: 1.54Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD623
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.54
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 164 m
- To
- 168.5 m
- Hole Depth
- 250 m
- Intercept Depth
- 164 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD623:164-168.5
Location
- Easting
- 421449.5
- Northing
- 471439.3
- Elevation
- 98.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.54g/t Au”
Context: 4.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD624Selinsing Gold Mine · goldGrade: 0.82Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD624
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 68.6 m
- To
- 69.4 m
- Hole Depth
- 200.3 m
- Intercept Depth
- 68.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD624:68.6-69.4
Location
- Easting
- 421335.7
- Northing
- 471772.5
- Elevation
- 118.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.82g/t Au”
Context: 0.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD624Selinsing Gold Mine · goldGrade: 3.77Grade Unit: g/tIntercept: 3.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD624
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.77
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 109.7 m
- To
- 113.5 m
- Hole Depth
- 200.3 m
- Intercept Depth
- 109.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD624:109.7-113.5
Location
- Easting
- 421335.7
- Northing
- 471772.5
- Elevation
- 118.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“3.77g/t Au”
Context: 3.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD625Selinsing Gold Mine · goldGrade: 0.21Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 9.9 m
- To
- 11.4 m
- Hole Depth
- 230.4 m
- Intercept Depth
- 9.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD625:9.9-11.4
Location
- Easting
- 421402
- Northing
- 471592.5
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.21g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD625Selinsing Gold Mine · goldGrade: 0.24Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 14.4 m
- To
- 15.9 m
- Hole Depth
- 230.4 m
- Intercept Depth
- 14.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD625:14.4-15.9
Location
- Easting
- 421402
- Northing
- 471592.5
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.24g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD625Selinsing Gold Mine · goldGrade: 0.26Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 45.9 m
- To
- 47.4 m
- Hole Depth
- 230.4 m
- Intercept Depth
- 45.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD625:45.9-47.4
Location
- Easting
- 421402
- Northing
- 471592.5
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.26g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD625Selinsing Gold Mine · goldGrade: 3.58Grade Unit: g/tIntercept: 5.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD625
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.58
- Grade Unit
- g/t
- Intercept
- 5.6 m
- From
- 136.9 m
- To
- 142.5 m
- Hole Depth
- 230.4 m
- Intercept Depth
- 136.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD625:136.9-142.5
Location
- Easting
- 421402
- Northing
- 471592.5
- Elevation
- 107.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“3.58g/t Au”
Context: 5.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD626Selinsing Gold Mine · goldGrade: 3.07Grade Unit: g/tIntercept: 16.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD626
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.07
- Grade Unit
- g/t
- Intercept
- 16.5 m
- From
- 64.1 m
- To
- 80.6 m
- Hole Depth
- 100.2 m
- Intercept Depth
- 64.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD626:64.1-80.6
Location
- Easting
- 421258
- Northing
- 471979.4
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, indicating a substantial mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“3.07g/t Au”
Context: 16.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD627Selinsing Gold Mine · goldGrade: 4.68Grade Unit: g/tIntercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD627
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 4.68
- Grade Unit
- g/t
- Intercept
- 10.1 m
- From
- 63.7 m
- To
- 73.8 m
- Hole Depth
- 100.5 m
- Intercept Depth
- 63.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD627:63.7-73.8
Location
- Easting
- 421259.5
- Northing
- 471960.2
- Elevation
- 58.4 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a very strong gold grade over a significant width, indicating a highly material mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“4.68g/t Au”
Context: 10.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD627Selinsing Gold Mine · goldGrade: 2.47Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD627
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.47
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 84.7 m
- To
- 88.1 m
- Hole Depth
- 100.5 m
- Intercept Depth
- 84.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD627:84.7-88.1
Location
- Easting
- 421259.5
- Northing
- 471960.2
- Elevation
- 58.4 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“2.47g/t Au”
Context: 3.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD627Selinsing Gold Mine · goldGrade: 0.43Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD627
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 91.2 m
- To
- 92.8 m
- Hole Depth
- 100.5 m
- Intercept Depth
- 91.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD627:91.2-92.8
Location
- Easting
- 421259.5
- Northing
- 471960.2
- Elevation
- 58.4 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.43g/t Au”
Context: 1.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD628Selinsing Gold Mine · goldGrade: 0.55Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 2.4 m
- To
- 3.9 m
- Hole Depth
- 190.4 m
- Intercept Depth
- 2.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD628:2.4-3.9
Location
- Easting
- 421383.4
- Northing
- 471595.5
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.55g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD628Selinsing Gold Mine · goldGrade: 4.3Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 4.3
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 58.9 m
- To
- 59.6 m
- Hole Depth
- 190.4 m
- Intercept Depth
- 58.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD628:58.9-59.6
Location
- Easting
- 421383.4
- Northing
- 471595.5
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“4.3g/t Au”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD628Selinsing Gold Mine · goldGrade: 1.4Grade Unit: g/tIntercept: 6.2 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 6.2 m
- From
- 61.6 m
- To
- 67.8 m
- Hole Depth
- 190.4 m
- Intercept Depth
- 61.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD628:61.6-67.8
Location
- Easting
- 421383.4
- Northing
- 471595.5
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.4g/t Au”
Context: 6.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD628Selinsing Gold Mine · goldGrade: 3.25Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.25
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 68.9 m
- To
- 69.7 m
- Hole Depth
- 190.4 m
- Intercept Depth
- 68.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD628:68.9-69.7
Location
- Easting
- 421383.4
- Northing
- 471595.5
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“3.25g/t Au”
Context: 0.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD628Selinsing Gold Mine · goldGrade: 5.66Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 5.66
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 78.9 m
- To
- 81.9 m
- Hole Depth
- 190.4 m
- Intercept Depth
- 78.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD628:78.9-81.9
Location
- Easting
- 421383.4
- Northing
- 471595.5
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a moderate width, indicating a highly material mineralized zone.
Positive factors
- High-grade gold intercept.
Evidence · table
“5.66g/t Au”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD628Selinsing Gold Mine · goldGrade: 13.9Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 13.9
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 94.3 m
- To
- 95.4 m
- Hole Depth
- 190.4 m
- Intercept Depth
- 94.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD628:94.3-95.4
Location
- Easting
- 421383.4
- Northing
- 471595.5
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptionally high gold grade over a narrow width, representing a bonanza intercept.
Positive factors
- Bonanza Intercept
- Exceptionally high-grade gold intercept.
Evidence · table
“13.9g/t Au”
Context: 1.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD628Selinsing Gold Mine · goldGrade: 1.68Grade Unit: g/tIntercept: 5.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD628
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.68
- Grade Unit
- g/t
- Intercept
- 5.8 m
- From
- 113.4 m
- To
- 119.2 m
- Hole Depth
- 190.4 m
- Intercept Depth
- 113.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD628:113.4-119.2
Location
- Easting
- 421383.4
- Northing
- 471595.5
- Elevation
- 102.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.68g/t Au”
Context: 5.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD629Selinsing Gold Mine · goldGrade: 0.22Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 35.5 m
- To
- 37.5 m
- Hole Depth
- 80.3 m
- Intercept Depth
- 35.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD629:35.5-37.5
Location
- Easting
- 421247.7
- Northing
- 471978.5
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.22g/t Au”
Context: 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD629Selinsing Gold Mine · goldGrade: 3.1Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.1
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 39 m
- To
- 46 m
- Hole Depth
- 80.3 m
- Intercept Depth
- 39 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD629:39-46
Location
- Easting
- 421247.7
- Northing
- 471978.5
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, indicating significant mineralization.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“3.10g/t Au”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD629Selinsing Gold Mine · goldGrade: 0.29Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 54.7 m
- To
- 55.2 m
- Hole Depth
- 80.3 m
- Intercept Depth
- 54.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD629:54.7-55.2
Location
- Easting
- 421247.7
- Northing
- 471978.5
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.29g/t Au”
Context: 0.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD629Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD629
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 61.8 m
- To
- 64.2 m
- Hole Depth
- 80.3 m
- Intercept Depth
- 61.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD629:61.8-64.2
Location
- Easting
- 421247.7
- Northing
- 471978.5
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.32g/t Au”
Context: 2.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD630Selinsing Gold Mine · goldGrade: 2.17Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD630
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.17
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 21.3 m
- To
- 23 m
- Hole Depth
- 101 m
- Intercept Depth
- 21.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD630:21.3-23
Location
- Easting
- 421272.3
- Northing
- 471941.6
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“2.17g/t Au”
Context: 1.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD630Selinsing Gold Mine · goldGrade: 3.49Grade Unit: g/tIntercept: 5.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD630
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.49
- Grade Unit
- g/t
- Intercept
- 5.3 m
- From
- 59 m
- To
- 64.3 m
- Hole Depth
- 101 m
- Intercept Depth
- 59 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD630:59-64.3
Location
- Easting
- 421272.3
- Northing
- 471941.6
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“3.49g/t Au”
Context: 5.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD630Selinsing Gold Mine · goldGrade: 2.64Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- MBRDD630
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.64
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 78.5 m
- To
- 84.5 m
- Hole Depth
- 101 m
- Intercept Depth
- 78.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD630:78.5-84.5
Location
- Easting
- 421272.3
- Northing
- 471941.6
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, indicating significant mineralization.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“2.64g/t Au”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD631Selinsing Gold Mine · goldGrade: 6.12Grade Unit: g/tIntercept: 6.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD631
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 6.12
- Grade Unit
- g/t
- Intercept
- 6.1 m
- From
- 44.2 m
- To
- 50.3 m
- Hole Depth
- 80.2 m
- Intercept Depth
- 44.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD631:44.2-50.3
Location
- Easting
- 421243.2
- Northing
- 471958
- Elevation
- 58.3 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a significant width, indicating a highly material mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“6.12g/t Au”
Context: 6.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD631Selinsing Gold Mine · goldGrade: 0.5Grade Unit: g/tIntercept: 4.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD631
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 4.6 m
- From
- 54.4 m
- To
- 59 m
- Hole Depth
- 80.2 m
- Intercept Depth
- 54.4 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD631:54.4-59
Location
- Easting
- 421243.2
- Northing
- 471958
- Elevation
- 58.3 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a moderate width, contributing to the overall mineralization but not standing out as high-grade.
Negative factors
- Low grade for gold.
Evidence · table
“0.50g/t Au”
Context: 4.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD632Selinsing Gold Mine · goldGrade: 1.73Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- MBRDD632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.73
- Grade Unit
- g/t
- Intercept
- 2.2 m
- From
- 0 m
- To
- 2.2 m
- Hole Depth
- 110.2 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD632:0-2.2
Location
- Easting
- 421294.3
- Northing
- 471905.7
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating significant mineralization near surface.
Evidence · table
“1.73g/t Au”
Context: 2.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD632Selinsing Gold Mine · goldGrade: 2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 32.2 m
- To
- 35.2 m
- Hole Depth
- 110.2 m
- Intercept Depth
- 32.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD632:32.2-35.2
Location
- Easting
- 421294.3
- Northing
- 471905.7
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“2.0g/t Au”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD632Selinsing Gold Mine · goldGrade: 2.61Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.61
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 67.7 m
- To
- 83.2 m
- Hole Depth
- 110.2 m
- Intercept Depth
- 67.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD632:67.7-83.2
Location
- Easting
- 421294.3
- Northing
- 471905.7
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, indicating a substantial mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“2.61g/t Au”
Context: 15.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD632Selinsing Gold Mine · goldGrade: 5.62Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- MBRDD632
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 5.62
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 72.7 m
- To
- 78.7 m
- Hole Depth
- 110.2 m
- Intercept Depth
- 72.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD632:72.7-78.7
Location
- Easting
- 421294.3
- Northing
- 471905.7
- Elevation
- 58.7 m
- Azimuth
- 262 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a moderate width, indicating a highly material zone within the broader intercept.
Positive factors
- High-grade gold intercept.
Evidence · table
“5.62g/t Au”
Context: 6m
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD633Selinsing Gold Mine · goldGrade: 2.14Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD633
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.14
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 16.1 m
- To
- 17.4 m
- Hole Depth
- 80.4 m
- Intercept Depth
- 16.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD633:16.1-17.4
Location
- Easting
- 421259.3
- Northing
- 472096.5
- Elevation
- 59.1 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“2.14g/t Au”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD635Selinsing Gold Mine · goldGrade: 1.27Grade Unit: g/tIntercept: 8.1 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.27
- Grade Unit
- g/t
- Intercept
- 8.1 m
- From
- 6.9 m
- To
- 15 m
- Hole Depth
- 120 m
- Intercept Depth
- 6.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD635:6.9-15
Location
- Easting
- 421272
- Northing
- 472022.9
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.27g/t Au”
Context: 8.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD635Selinsing Gold Mine · goldGrade: 7.53Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 7.53
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 79.5 m
- To
- 82.5 m
- Hole Depth
- 120 m
- Intercept Depth
- 79.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD635:79.5-82.5
Location
- Easting
- 421272
- Northing
- 472022.9
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a narrow width, indicating a highly material mineralized zone.
Positive factors
- High-grade gold intercept.
Evidence · table
“7.53g/t Au”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD635Selinsing Gold Mine · goldGrade: 0.48Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 85.5 m
- To
- 86.2 m
- Hole Depth
- 120 m
- Intercept Depth
- 85.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD635:85.5-86.2
Location
- Easting
- 421272
- Northing
- 472022.9
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.48g/t Au”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD635Selinsing Gold Mine · goldGrade: 2.95Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.95
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 88.5 m
- To
- 91.5 m
- Hole Depth
- 120 m
- Intercept Depth
- 88.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD635:88.5-91.5
Location
- Easting
- 421272
- Northing
- 472022.9
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“2.95g/t Au”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD635Selinsing Gold Mine · goldGrade: 1.52Grade Unit: g/tIntercept: 12.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 12.5 m
- From
- 94.5 m
- To
- 107 m
- Hole Depth
- 120 m
- Intercept Depth
- 94.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD635:94.5-107
Location
- Easting
- 421272
- Northing
- 472022.9
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, indicating a substantial mineralized zone.
Evidence · table
“1.52g/t Au”
Context: 12.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD635Selinsing Gold Mine · goldGrade: 2.39Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD635
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.39
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 113.5 m
- To
- 120 m
- Hole Depth
- 120 m
- Intercept Depth
- 113.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD635:113.5-120
Location
- Easting
- 421272
- Northing
- 472022.9
- Elevation
- 58.5 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, indicating significant mineralization.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“2.39g/t Au”
Context: 6.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD636Selinsing Gold Mine · goldGrade: 1.98Grade Unit: g/tIntercept: 3.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD636
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.98
- Grade Unit
- g/t
- Intercept
- 3.9 m
- From
- 81 m
- To
- 84.9 m
- Hole Depth
- 114.9 m
- Intercept Depth
- 81 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD636:81-84.9
Location
- Easting
- 421395.7
- Northing
- 471857.8
- Elevation
- 108 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.98g/t Au”
Context: 3.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD637Selinsing Gold Mine · goldGrade: 0.43Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 0 m
- To
- 1.6 m
- Hole Depth
- 98.9 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD637:0-1.6
Location
- Easting
- 421271.1
- Northing
- 472082.3
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.43g/t Au”
Context: 1.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD637Selinsing Gold Mine · goldGrade: 2.81Grade Unit: g/tIntercept: 4.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.81
- Grade Unit
- g/t
- Intercept
- 4.8 m
- From
- 26 m
- To
- 30.8 m
- Hole Depth
- 98.9 m
- Intercept Depth
- 26 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD637:26-30.8
Location
- Easting
- 421271.1
- Northing
- 472082.3
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, indicating significant mineralization.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“2.81g/t Au”
Context: 4.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD637Selinsing Gold Mine · goldGrade: 1.99Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 48.7 m
- To
- 49.4 m
- Hole Depth
- 98.9 m
- Intercept Depth
- 48.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD637:48.7-49.4
Location
- Easting
- 421271.1
- Northing
- 472082.3
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating significant mineralization.
Evidence · table
“1.99g/t Au”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD637Selinsing Gold Mine · goldGrade: 0.49Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD637
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 56.8 m
- To
- 57.7 m
- Hole Depth
- 98.9 m
- Intercept Depth
- 56.8 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD637:56.8-57.7
Location
- Easting
- 421271.1
- Northing
- 472082.3
- Elevation
- 58.9 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.49g/t Au”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD638Selinsing Gold Mine · goldGrade: 0.32Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 28.9 m
- To
- 30.2 m
- Hole Depth
- 140.2 m
- Intercept Depth
- 28.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:28.9-30.2
Location
- Easting
- 421296
- Northing
- 471944.9
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.32g/t Au”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD638Selinsing Gold Mine · goldGrade: 0.92Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 36.7 m
- To
- 39.7 m
- Hole Depth
- 140.2 m
- Intercept Depth
- 36.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:36.7-39.7
Location
- Easting
- 421296
- Northing
- 471944.9
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, contributing to the overall mineralization.
Negative factors
- Low grade for gold.
Evidence · table
“0.92g/t Au”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD638Selinsing Gold Mine · goldGrade: 0.73Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 55.5 m
- To
- 56.2 m
- Hole Depth
- 140.2 m
- Intercept Depth
- 55.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:55.5-56.2
Location
- Easting
- 421296
- Northing
- 471944.9
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.73g/t Au”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD638Selinsing Gold Mine · goldGrade: 1.9Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 100.7 m
- To
- 120.5 m
- Hole Depth
- 140.2 m
- Intercept Depth
- 100.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:100.7-120.5
Location
- Easting
- 421296
- Northing
- 471944.9
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, indicating a substantial mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“1.90g/t Au”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD638Selinsing Gold Mine · goldGrade: 2.93Grade Unit: g/tIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD638
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 2.93
- Grade Unit
- g/t
- Intercept
- 4.3 m
- From
- 110.2 m
- To
- 114.5 m
- Hole Depth
- 140.2 m
- Intercept Depth
- 110.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD638:110.2-114.5
Location
- Easting
- 421296
- Northing
- 471944.9
- Elevation
- 59 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, indicating a higher-grade zone within the broader intercept.
Positive factors
- High-grade gold intercept.
Evidence · table
“2.93g/t Au”
Context: 4.3m
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD639Selinsing Gold Mine · goldGrade: 0.66Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 1.5 m
- To
- 3 m
- Hole Depth
- 114 m
- Intercept Depth
- 1.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD639:1.5-3
Location
- Easting
- 421265.4
- Northing
- 472001
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.66g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD639Selinsing Gold Mine · goldGrade: 0.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 10.5 m
- To
- 12 m
- Hole Depth
- 114 m
- Intercept Depth
- 10.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD639:10.5-12
Location
- Easting
- 421265.4
- Northing
- 472001
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.50g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD639Selinsing Gold Mine · goldGrade: 1.77Grade Unit: g/tIntercept: 22.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.77
- Grade Unit
- g/t
- Intercept
- 22.5 m
- From
- 58.5 m
- To
- 81 m
- Hole Depth
- 114 m
- Intercept Depth
- 58.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD639:58.5-81
Location
- Easting
- 421265.4
- Northing
- 472001
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, indicating a substantial mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“1.77g/t Au”
Context: 22.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD639Selinsing Gold Mine · goldGrade: 3.58Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD639
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.58
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 64.5 m
- To
- 72 m
- Hole Depth
- 114 m
- Intercept Depth
- 64.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD639:64.5-72
Location
- Easting
- 421265.4
- Northing
- 472001
- Elevation
- 58.6 m
- Azimuth
- 262 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a significant width, indicating a higher-grade zone within the broader intercept.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“3.58g/t Au”
Context: 7.5m
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD641Selinsing Gold Mine · goldGrade: 0.51Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 80 m
- Intercept Depth
- 0 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD641:0-2
Location
- Easting
- 421270.2
- Northing
- 471860.5
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization near surface.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.51g/t Au”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD641Selinsing Gold Mine · goldGrade: 0.53Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 4.3 m
- To
- 5 m
- Hole Depth
- 80 m
- Intercept Depth
- 4.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD641:4.3-5
Location
- Easting
- 421270.2
- Northing
- 471860.5
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.53/t Au”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD641Selinsing Gold Mine · goldGrade: 1.99Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 42 m
- To
- 63 m
- Hole Depth
- 80 m
- Intercept Depth
- 42 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD641:42-63
Location
- Easting
- 421270.2
- Northing
- 471860.5
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, indicating a substantial mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“1.99g/t Au”
Context: 21.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD641Selinsing Gold Mine · goldGrade: 3.66Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 3.66
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 52.5 m
- To
- 57 m
- Hole Depth
- 80 m
- Intercept Depth
- 52.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD641:52.5-57
Location
- Easting
- 421270.2
- Northing
- 471860.5
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, indicating a higher-grade zone within the broader intercept.
Positive factors
- High-grade gold intercept.
Evidence · table
“3.66g/t Au”
Context: 4.5m
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD641Selinsing Gold Mine · goldGrade: 0.39Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD641
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 77 m
- To
- 78.5 m
- Hole Depth
- 80 m
- Intercept Depth
- 77 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD641:77-78.5
Location
- Easting
- 421270.2
- Northing
- 471860.5
- Elevation
- 58.7 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.39g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD642Selinsing Gold Mine · goldGrade: 0.86Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 59 m
- To
- 60 m
- Hole Depth
- 145.2 m
- Intercept Depth
- 59 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD642:59-60
Location
- Easting
- 421330.4
- Northing
- 471667.3
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.86g/t Au”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD642Selinsing Gold Mine · goldGrade: 0.68Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 64.6 m
- To
- 66 m
- Hole Depth
- 145.2 m
- Intercept Depth
- 64.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD642:64.6-66
Location
- Easting
- 421330.4
- Northing
- 471667.3
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.68g/t Au”
Context: 1.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD642Selinsing Gold Mine · goldGrade: 1.53Grade Unit: g/tIntercept: 6.7 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.53
- Grade Unit
- g/t
- Intercept
- 6.7 m
- From
- 70.3 m
- To
- 77 m
- Hole Depth
- 145.2 m
- Intercept Depth
- 70.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD642:70.3-77
Location
- Easting
- 421330.4
- Northing
- 471667.3
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.53g/t Au”
Context: 6.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD642Selinsing Gold Mine · goldGrade: 4.6Grade Unit: g/tIntercept: 3.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 3.8 m
- From
- 96 m
- To
- 99.8 m
- Hole Depth
- 145.2 m
- Intercept Depth
- 96 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD642:96-99.8
Location
- Easting
- 421330.4
- Northing
- 471667.3
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a very strong gold grade over a moderate width, indicating a highly material mineralized zone.
Positive factors
- High-grade gold intercept.
Evidence · table
“4.6g/t Au”
Context: 3.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD642Selinsing Gold Mine · goldGrade: 4Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- MBRDD642
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 122.1 m
- To
- 123 m
- Hole Depth
- 145.2 m
- Intercept Depth
- 122.1 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD642:122.1-123
Location
- Easting
- 421330.4
- Northing
- 471667.3
- Elevation
- 122.8 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, indicating significant mineralization.
Positive factors
- High-grade gold intercept.
Evidence · table
“4.0g/t Au”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD643Selinsing Gold Mine · goldGrade: 0.33Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MBRDD643
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 4.5 m
- To
- 7.5 m
- Hole Depth
- 97.5 m
- Intercept Depth
- 4.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD643:4.5-7.5
Location
- Easting
- 421268.1
- Northing
- 472039.2
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade for gold.
Evidence · table
“0.33g/t Au”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD643Selinsing Gold Mine · goldGrade: 0.53Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- MBRDD643
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 59.9 m
- To
- 67.5 m
- Hole Depth
- 97.5 m
- Intercept Depth
- 59.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD643:59.9-67.5
Location
- Easting
- 421268.1
- Northing
- 472039.2
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a moderate width, contributing to the overall mineralization but not standing out as high-grade.
Negative factors
- Low grade for gold.
Evidence · table
“0.53g/t Au”
Context: 7.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD643Selinsing Gold Mine · goldGrade: 0.43Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MBRDD643
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 71.5 m
- To
- 73.5 m
- Hole Depth
- 97.5 m
- Intercept Depth
- 71.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD643:71.5-73.5
Location
- Easting
- 421268.1
- Northing
- 472039.2
- Elevation
- 58.5 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.43g/t Au”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD644Selinsing Gold Mine · goldGrade: 0.31Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 1.5 m
- To
- 3 m
- Hole Depth
- 120.2 m
- Intercept Depth
- 1.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD644:1.5-3
Location
- Easting
- 421277
- Northing
- 471962.4
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.31g/t Au”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD644Selinsing Gold Mine · goldGrade: 1.92Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.92
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 16.2 m
- To
- 21.7 m
- Hole Depth
- 120.2 m
- Intercept Depth
- 16.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD644:16.2-21.7
Location
- Easting
- 421277
- Northing
- 471962.4
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.92/t Au”
Context: 5.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD644Selinsing Gold Mine · goldGrade: 0.99Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.99
- Grade Unit
- g/t
- Intercept
- 1.8 m
- From
- 38.2 m
- To
- 40 m
- Hole Depth
- 120.2 m
- Intercept Depth
- 38.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD644:38.2-40
Location
- Easting
- 421277
- Northing
- 471962.4
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows low-grade gold over a narrow width, contributing to the overall mineralization.
Negative factors
- Low grade and narrow width for gold.
Evidence · table
“0.99g/t Au”
Context: 1.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD644Selinsing Gold Mine · goldGrade: 1.9Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD644
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 11.5 m
- From
- 83.6 m
- To
- 95.1 m
- Hole Depth
- 120.2 m
- Intercept Depth
- 83.6 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD644:83.6-95.1
Location
- Easting
- 421277
- Northing
- 471962.4
- Elevation
- 58.8 m
- Azimuth
- 72 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, indicating a substantial mineralized zone.
Positive factors
- High-grade gold intercept over a significant width.
Evidence · table
“1.90g/t Au”
Context: 11.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD645Selinsing Gold Mine · goldGrade: 1.21Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MBRDD645
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.21
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 22.5 m
- To
- 23.5 m
- Hole Depth
- 190 m
- Intercept Depth
- 22.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD645:22.5-23.5
Location
- Easting
- 421367.2
- Northing
- 471470.2
- Elevation
- 62.5 m
- Azimuth
- 262 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating a mineralized zone.
Evidence · table
“1.21g/t Au”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD645Selinsing Gold Mine · goldGrade: 0.24Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- MBRDD645
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 30.2 m
- To
- 31.5 m
- Hole Depth
- 190 m
- Intercept Depth
- 30.2 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD645:30.2-31.5
Location
- Easting
- 421367.2
- Northing
- 471470.2
- Elevation
- 62.5 m
- Azimuth
- 262 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows very low-grade gold over a narrow width, indicating minor mineralization.
Negative factors
- Very low grade and narrow width for gold.
Evidence · table
“0.24g/t Au”
Context: 1.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
MBRDD646Selinsing Gold Mine · goldGrade: 1.47Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- MBRDD646
- Project
- Selinsing Gold Mine
- Commodity
- gold
- Region
- pahang state in the central gold belt of western malaysia
- Reported Region
- pahang state in the central gold belt of western malaysia
- Ticker
- MMY
Geometry
- Grade
- 1.47
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 100.5 m
- To
- 105 m
- Hole Depth
- 140 m
- Intercept Depth
- 100.5 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- MBRDD646:100.5-105
Location
- Easting
- 421316.4
- Northing
- 471744.7
- Elevation
- 126 m
- Azimuth
- 262 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Malaysia
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-29T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a significant mineralized zone.
Evidence · table
“1.47gt Au”
Context: 4.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.