NexGold Intersects 12.06 g/t Gold over 6.0 Metres and 3.84 g/t Gold over 18.0 Metres During Infill Drill Program at Goldboro
Original announcement by tmx on
- Company
- NexGold Mining Corp.
- Ticker
- NEXG
- Exchange
- TSX
- Region
- Nova Scotia
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-12 14:39:58 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
NexGold Mining Corp. reported additional high-grade gold assay results from its ongoing RC infill drill program at the Goldboro Gold Project in Nova Scotia. The program, which has been expanded to 40,000 metres, continues to confirm the continuity and tenor of near-surface mineralization within the proposed West and East pits, with notable intercepts including 12.06 g/t Au over 6.0 metres and 3.84 g/t Au over 18.0 metres. These results are intended to support geological modeling, resource refinement, and upgrade Mineral Resources from Indicated to Measured categories.
Reasoning: The drill results from the infill program at Goldboro show several high-grade gold intercepts, confirming the continuity and tenor of near-surface mineralization within the proposed pit areas. The program's objective to upgrade resources from Indicated to Measured is a significant de-risking step, and the expansion of the program signals positive progress. Robust QA/QC procedures enhance confidence in the reported assays. However, the lack of specific true width for each intercept and undisclosed compositing parameters are minor drawbacks.
Positive factors
- High-grade gold intercepts, including bonanza grades, confirm continuity and tenor of mineralization.
- Infill drilling aims to upgrade resources from Indicated to Measured category, de-risking the project.
- Expansion of the drill program indicates positive initial results and further potential.
- Comprehensive QA/QC procedures are disclosed, including certified lab and QP sign-off.
Negative factors
- True width is not provided for individual intercepts, only a general range of variability.
- No specific cut-off grade or internal dilution rules are disclosed for compositing intervals.
Facts used in scoring: 120
Extracted facts
Stored fact records: 120. Some facts used in scoring do not have a stored record.
Drill Results (120)
RC-26-084Goldboro · goldGrade: 0.93Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-084
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.93
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 40 m
- To
- 44 m
- Hole Depth
- 50 m
- Intercept Depth
- 40 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-084:40-44
- Mining Method
- open_pit
Location
- Easting
- 5006355
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5006.2 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data for resource refinement.
Evidence · table
“0.93”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-085Goldboro · goldGrade: 1.75Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-085
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.75
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 17 m
- To
- 22 m
- Hole Depth
- 50 m
- Intercept Depth
- 17 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-085:17-22
- Mining Method
- open_pit
Location
- Easting
- 5006368
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5006.7 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, supporting the infill program's objective.
Evidence · table
“1.75”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-087Goldboro · goldGrade: 1.03Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-087
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 30 m
- To
- 32 m
- Hole Depth
- 50 m
- Intercept Depth
- 30 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-087:30-32
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5005.5 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“1.03”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-087Goldboro · goldGrade: 0.28Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-087
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 37 m
- To
- 41 m
- Hole Depth
- 50 m
- Intercept Depth
- 30 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-087:37-41
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5005.5 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade, providing data for the infill program but not highly material on its own.
Evidence · table
“0.28”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-088Goldboro · goldGrade: 0.26Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-088
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 13 m
- To
- 19 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-088:13-19
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5004.9 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade, providing data for the infill program but not highly material on its own.
Evidence · table
“0.26”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-088Goldboro · goldGrade: 1.14Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-088
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.14
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 28 m
- To
- 29 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-088:28-29
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5004.9 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“1.14”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-088Goldboro · goldGrade: 2.66Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-088
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.66
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 37 m
- To
- 41 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-088:37-41
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5004.9 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, positively contributing to the infill program.
Evidence · table
“2.66”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-088Goldboro · goldGrade: 0.88Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-088
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 43 m
- To
- 49 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-088:43-49
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606448.5
- CRS
- NAD83 UTM
- Elevation
- 5004.9 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.88”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-089Goldboro · goldGrade: 0.29Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-089
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 20 m
- To
- 25 m
- Hole Depth
- 50 m
- Intercept Depth
- 20 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-089:20-25
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606461
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade, providing data for the infill program but not highly material on its own.
Evidence · table
“0.29”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-089Goldboro · goldGrade: 1.39Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- RC-26-089
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.39
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 35 m
- To
- 49 m
- Hole Depth
- 50 m
- Intercept Depth
- 20 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-089:35-49
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606461
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, positively contributing to the infill program.
Evidence · table
“1.39”
Context: 14.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-090Goldboro · goldGrade: 0.62Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-090
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.62
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 14 m
- To
- 19 m
- Hole Depth
- 50 m
- Intercept Depth
- 14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-090:14-19
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606461
- CRS
- NAD83 UTM
- Elevation
- 5004.7 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.62”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-090Goldboro · goldGrade: 0.58Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-090
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.58
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 30 m
- To
- 33 m
- Hole Depth
- 50 m
- Intercept Depth
- 14 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-090:30-33
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606461
- CRS
- NAD83 UTM
- Elevation
- 5004.7 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.58”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-091Goldboro · goldGrade: 0.38Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-091
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 30 m
- To
- 33 m
- Hole Depth
- 50 m
- Intercept Depth
- 30 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-091:30-33
- Mining Method
- open_pit
Location
- Easting
- 5006380
- Northing
- 606461
- CRS
- NAD83 UTM
- Elevation
- 5005 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.38”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-091Goldboro · goldGrade: 0.43Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-091
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 43 m
- To
- 49 m
- Hole Depth
- 50 m
- Intercept Depth
- 30 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-091:43-49
- Mining Method
- open_pit
Location
- Easting
- 5006380
- Northing
- 606461
- CRS
- NAD83 UTM
- Elevation
- 5005 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.43”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-092Goldboro · goldGrade: 4.27Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-092
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.27
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 15 m
- To
- 21 m
- Hole Depth
- 50 m
- Intercept Depth
- 15 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-092:15-21
- Mining Method
- open_pit
Location
- Easting
- 5006368
- Northing
- 606461
- CRS
- NAD83 UTM
- Elevation
- 5005 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a reasonable width, significantly contributing to the infill program.
Evidence · table
“4.27”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-096Goldboro · goldGrade: 4.46Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-096
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.46
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 40 m
- To
- 44 m
- Hole Depth
- 50 m
- Intercept Depth
- 40 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-096:40-44
- Mining Method
- open_pit
Location
- Easting
- 5006355
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5005.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, significantly contributing to the infill program.
Evidence · table
“4.46”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-097Goldboro · goldGrade: 1.99Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-097
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 12 m
- To
- 17 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-097:12-17
- Mining Method
- open_pit
Location
- Easting
- 5006368
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5005 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, supporting the infill program's objective.
Evidence · table
“1.99”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-097Goldboro · goldGrade: 1.12Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-097
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-097:24-25
- Mining Method
- open_pit
Location
- Easting
- 5006368
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5005 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“1.12”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-099Goldboro · goldGrade: 0.37Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-099
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 13 m
- To
- 17 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-099:13-17
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.37”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-099Goldboro · goldGrade: 1.01Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-099
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.01
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 27 m
- To
- 29 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-099:27-29
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“1.01”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-099Goldboro · goldGrade: 0.4Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-099
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 42 m
- To
- 45 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-099:42-45
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.40”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-100Goldboro · goldGrade: 0.32Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-100
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 9 m
- To
- 15 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-100:9-15
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.32”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-100Goldboro · goldGrade: 0.94Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-100
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 17 m
- To
- 21 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-100:17-21
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.94”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-100Goldboro · goldGrade: 1.56Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-100
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.56
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 23 m
- To
- 26 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-100:23-26
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, supporting the infill program's objective.
Evidence · table
“1.56”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-100Goldboro · goldGrade: 0.69Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-100
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 31 m
- To
- 34 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-100:31-34
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.69”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-100Goldboro · goldGrade: 0.89Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-100
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 36 m
- To
- 40 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-100:36-40
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.89”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-100Goldboro · goldGrade: 4.73Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-100
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.73
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 44 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-100:44-50
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a reasonable width, significantly contributing to the infill program.
Evidence · table
“4.73”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-100Goldboro · goldGrade: 11.34Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-100
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 11.34
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 47 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-100:47-48
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606473.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“11.34”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-102Goldboro · goldGrade: 1.59Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- RC-26-102
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.59
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 19 m
- To
- 27 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-102:19-27
- Mining Method
- open_pit
Location
- Easting
- 5006399
- Northing
- 606485
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, supporting the infill program's objective.
Evidence · table
“1.59”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-102Goldboro · goldGrade: 3.84Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- RC-26-102
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 3.84
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 30 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-102:30-48
- Mining Method
- open_pit
Location
- Easting
- 5006399
- Northing
- 606485
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, representing a highly material result for the infill program.
Evidence · table
“3.84”
Context: 18.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-102Goldboro · goldGrade: 28.04Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-102
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 28.04
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 36 m
- To
- 37 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-102:36-37
- Mining Method
- open_pit
Location
- Easting
- 5006399
- Northing
- 606485
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“28.04”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-102Goldboro · goldGrade: 15.46Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-102
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 15.46
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 43 m
- To
- 44 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-102:43-44
- Mining Method
- open_pit
Location
- Easting
- 5006399
- Northing
- 606485
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“15.46”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-103Goldboro · goldGrade: 0.54Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-103
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.54
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 21 m
- To
- 27 m
- Hole Depth
- 50 m
- Intercept Depth
- 21 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-103:21-27
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5004.5 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.54”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-103Goldboro · goldGrade: 1.87Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-103
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.87
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 44 m
- To
- 46 m
- Hole Depth
- 50 m
- Intercept Depth
- 21 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-103:44-46
- Mining Method
- open_pit
Location
- Easting
- 5006393
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5004.5 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, supporting the infill program's objective.
Evidence · table
“1.87”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-104Goldboro · goldGrade: 0.68Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-104
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 20 m
- To
- 23 m
- Hole Depth
- 50 m
- Intercept Depth
- 20 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-104:20-23
- Mining Method
- open_pit
Location
- Easting
- 5006380
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.68”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-104Goldboro · goldGrade: 0.38Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-104
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 41 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 20 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-104:41-48
- Mining Method
- open_pit
Location
- Easting
- 5006380
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the infill program's data.
Evidence · table
“0.38”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-105Goldboro · goldGrade: 3.82Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-105
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 3.82
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 13 m
- To
- 18 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-105:13-18
- Mining Method
- open_pit
Location
- Easting
- 5006368
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5003.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a reasonable width, significantly contributing to the infill program.
Evidence · table
“3.82”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-105Goldboro · goldGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-105
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-105:23-24
- Mining Method
- open_pit
Location
- Easting
- 5006368
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5003.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“1.10”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-106Goldboro · goldGrade: 10.23Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-106
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 10.23
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 35 m
- To
- 38 m
- Hole Depth
- 50 m
- Intercept Depth
- 35 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-106:35-38
- Mining Method
- open_pit
Location
- Easting
- 5006355
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5004.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows an exceptional bonanza gold grade over a narrow width, representing a highly material result for the infill program.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“10.23”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-106Goldboro · goldGrade: 27.43Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-106
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 27.43
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 35 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 35 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-106:35-36
- Mining Method
- open_pit
Location
- Easting
- 5006355
- Northing
- 606486
- CRS
- NAD83 UTM
- Elevation
- 5004.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“27.43”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-109Goldboro · goldGrade: 0.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-109
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 15 m
- To
- 18 m
- Hole Depth
- 50 m
- Intercept Depth
- 15 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-109:15-18
- Mining Method
- open_pit
Location
- Easting
- 5006342.6
- Northing
- 606510.5
- CRS
- NAD83 UTM
- Elevation
- 5004.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.45”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-112Goldboro · goldGrade: 5.01Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-112
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 5.01
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 44 m
- To
- 49 m
- Hole Depth
- 50 m
- Intercept Depth
- 44 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-112:44-49
- Mining Method
- open_pit
Location
- Easting
- 5006380.3
- Northing
- 606510.1
- CRS
- NAD83 UTM
- Elevation
- 5002.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a reasonable width, representing a highly material result for the infill program.
Evidence · table
“5.01”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-112Goldboro · goldGrade: 21.37Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-112
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 21.37
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 46 m
- To
- 47 m
- Hole Depth
- 50 m
- Intercept Depth
- 44 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-112:46-47
- Mining Method
- open_pit
Location
- Easting
- 5006380.3
- Northing
- 606510.1
- CRS
- NAD83 UTM
- Elevation
- 5002.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“21.37”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-113Goldboro · goldGrade: 1.11Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-113
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 27 m
- To
- 28 m
- Hole Depth
- 50 m
- Intercept Depth
- 27 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-113:27-28
- Mining Method
- open_pit
Location
- Easting
- 5006360.4
- Northing
- 606511.2
- CRS
- NAD83 UTM
- Elevation
- 5002.6 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“1.11”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-113Goldboro · goldGrade: 3.72Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-113
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 3.72
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 35 m
- To
- 42 m
- Hole Depth
- 50 m
- Intercept Depth
- 27 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-113:35-42
- Mining Method
- open_pit
Location
- Easting
- 5006360.4
- Northing
- 606511.2
- CRS
- NAD83 UTM
- Elevation
- 5002.6 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a good width, significantly contributing to the infill program.
Evidence · table
“3.72”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-114Goldboro · goldGrade: 0.38Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-114
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 26 m
- To
- 29 m
- Hole Depth
- 50 m
- Intercept Depth
- 26 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-114:26-29
- Mining Method
- open_pit
Location
- Easting
- 5006392.8
- Northing
- 606510.9
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.38”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-114Goldboro · goldGrade: 2.12Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-114
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.12
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 46 m
- To
- 47 m
- Hole Depth
- 50 m
- Intercept Depth
- 26 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-114:46-47
- Mining Method
- open_pit
Location
- Easting
- 5006392.8
- Northing
- 606510.9
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“2.12”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-115Goldboro · goldGrade: 1.27Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-115
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.27
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 35 m
- To
- 41 m
- Hole Depth
- 50 m
- Intercept Depth
- 35 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-115:35-41
- Mining Method
- open_pit
Location
- Easting
- 5006404.4
- Northing
- 606509.8
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“1.27”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-115Goldboro · goldGrade: 1.2Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-115
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 43 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 35 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-115:43-50
- Mining Method
- open_pit
Location
- Easting
- 5006404.4
- Northing
- 606509.8
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the infill program's data.
Evidence · table
“1.20”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-116Goldboro · goldGrade: 0.36Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-116
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 19 m
- To
- 23 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-116:19-23
- Mining Method
- open_pit
Location
- Easting
- 5006404.7
- Northing
- 606498.5
- CRS
- NAD83 UTM
- Elevation
- 5003.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.36”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-116Goldboro · goldGrade: 2.04Grade Unit: g/tIntercept: 19 mView all detailsHide details
Identity
- Hole ID
- RC-26-116
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.04
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 31 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-116:31-50
- Mining Method
- open_pit
Location
- Easting
- 5006404.7
- Northing
- 606498.5
- CRS
- NAD83 UTM
- Elevation
- 5003.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, representing a highly material result for the infill program.
Evidence · table
“2.04”
Context: 19.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-116Goldboro · goldGrade: 12.19Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-116
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 12.19
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 46 m
- To
- 47 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-116:46-47
- Mining Method
- open_pit
Location
- Easting
- 5006404.7
- Northing
- 606498.5
- CRS
- NAD83 UTM
- Elevation
- 5003.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“12.19”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-117Goldboro · goldGrade: 0.42Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- RC-26-117
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 24 m
- To
- 32 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-117:24-32
- Mining Method
- open_pit
Location
- Easting
- 5006391.8
- Northing
- 606498.2
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the infill program's data.
Evidence · table
“0.42”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-118Goldboro · goldGrade: 0.63Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-118
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 25 m
- To
- 28 m
- Hole Depth
- 50 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-118:25-28
- Mining Method
- open_pit
Location
- Easting
- 5006380.8
- Northing
- 606498.2
- CRS
- NAD83 UTM
- Elevation
- 5003 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.63”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-118Goldboro · goldGrade: 0.32Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-118
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 34 m
- To
- 39 m
- Hole Depth
- 50 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-118:34-39
- Mining Method
- open_pit
Location
- Easting
- 5006380.8
- Northing
- 606498.2
- CRS
- NAD83 UTM
- Elevation
- 5003 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.32”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-118Goldboro · goldGrade: 0.76Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-118
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 42 m
- To
- 44 m
- Hole Depth
- 50 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-118:42-44
- Mining Method
- open_pit
Location
- Easting
- 5006380.8
- Northing
- 606498.2
- CRS
- NAD83 UTM
- Elevation
- 5003 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.76”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-119Goldboro · goldGrade: 0.53Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-119
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 10 m
- To
- 12 m
- Hole Depth
- 50 m
- Intercept Depth
- 10 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-119:10-12
- Mining Method
- open_pit
Location
- Easting
- 5006366.9
- Northing
- 606498.4
- CRS
- NAD83 UTM
- Elevation
- 5002.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.53”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-120Goldboro · goldGrade: 6.34Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-120
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 6.34
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 33 m
- To
- 38 m
- Hole Depth
- 50 m
- Intercept Depth
- 33 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-120:33-38
- Mining Method
- open_pit
Location
- Easting
- 5006354.8
- Northing
- 606499.1
- CRS
- NAD83 UTM
- Elevation
- 5003.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a reasonable width, representing a highly material result for the infill program.
Evidence · table
“6.34”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-120Goldboro · goldGrade: 13.32Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-120
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 13.32
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 34 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 33 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-120:34-36
- Mining Method
- open_pit
Location
- Easting
- 5006354.8
- Northing
- 606499.1
- CRS
- NAD83 UTM
- Elevation
- 5003.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“13.32”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-121Goldboro · goldGrade: 0.55Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-121
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 12 m
- To
- 14 m
- Hole Depth
- 37 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-121:12-14
- Mining Method
- open_pit
Location
- Easting
- 5006343.3
- Northing
- 606522.7
- CRS
- NAD83 UTM
- Elevation
- 5003.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.55”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-122Goldboro · goldGrade: 10.78Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-122
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 10.78
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 33 m
- To
- 36 m
- Hole Depth
- 36 m
- Intercept Depth
- 33 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-122:33-36
- Mining Method
- open_pit
Location
- Easting
- 5006355.2
- Northing
- 606523.8
- CRS
- NAD83 UTM
- Elevation
- 5002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows an exceptional bonanza gold grade over a narrow width, representing a highly material result for the infill program.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“10.78”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-122Goldboro · goldGrade: 13.86Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-122
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 13.86
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 34 m
- To
- 36 m
- Hole Depth
- 36 m
- Intercept Depth
- 33 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-122:34-36
- Mining Method
- open_pit
Location
- Easting
- 5006355.2
- Northing
- 606523.8
- CRS
- NAD83 UTM
- Elevation
- 5002 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“13.86”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-123Goldboro · goldGrade: 1.33Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-123
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.33
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 25 m
- To
- 26 m
- Hole Depth
- 36 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-123:25-26
- Mining Method
- open_pit
Location
- Easting
- 5006368
- Northing
- 606524
- CRS
- NAD83 UTM
- Elevation
- 5001.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“1.33”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-125Goldboro · goldGrade: 0.96Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-125
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 11 m
- To
- 15 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-125:11-15
- Mining Method
- open_pit
Location
- Easting
- 5006392.6
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.96”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-125Goldboro · goldGrade: 0.41Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-125
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 17 m
- To
- 21 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-125:17-21
- Mining Method
- open_pit
Location
- Easting
- 5006392.6
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.41”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-125Goldboro · goldGrade: 0.76Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-125
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 25 m
- To
- 30 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-125:25-30
- Mining Method
- open_pit
Location
- Easting
- 5006392.6
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.76”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-125Goldboro · goldGrade: 0.31Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-125
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 32 m
- To
- 38 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-125:32-38
- Mining Method
- open_pit
Location
- Easting
- 5006392.6
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.31”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-125Goldboro · goldGrade: 1.4Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-125
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 40 m
- To
- 42 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-125:40-42
- Mining Method
- open_pit
Location
- Easting
- 5006392.6
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“1.40”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-125Goldboro · goldGrade: 0.79Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-125
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 45 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-125:45-48
- Mining Method
- open_pit
Location
- Easting
- 5006392.6
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.79”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-126Goldboro · goldGrade: 1.97Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- RC-26-126
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.97
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 24 m
- To
- 32 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-126:24-32
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, supporting the infill program's objective.
Evidence · table
“1.97”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-126Goldboro · goldGrade: 3.24Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- RC-26-126
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 3.24
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 36 m
- To
- 47 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-126:36-47
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, representing a highly material result for the infill program.
Evidence · table
“3.24”
Context: 11.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-126Goldboro · goldGrade: 11.64Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-126
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 11.64
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 43 m
- To
- 44 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-126:43-44
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606523.5
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“11.64”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-127Goldboro · goldGrade: 1.46Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-127
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.46
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 13 m
- To
- 19 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-127:13-19
- Mining Method
- open_pit
Location
- Easting
- 5006416.8
- Northing
- 606523
- CRS
- NAD83 UTM
- Elevation
- 5003.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“1.46”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-127Goldboro · goldGrade: 1.49Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-127
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.49
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 31 m
- To
- 37 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-127:31-37
- Mining Method
- open_pit
Location
- Easting
- 5006416.8
- Northing
- 606523
- CRS
- NAD83 UTM
- Elevation
- 5003.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“1.49”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-127Goldboro · goldGrade: 1.29Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-127
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.29
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 41 m
- To
- 46 m
- Hole Depth
- 50 m
- Intercept Depth
- 13 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-127:41-46
- Mining Method
- open_pit
Location
- Easting
- 5006416.8
- Northing
- 606523
- CRS
- NAD83 UTM
- Elevation
- 5003.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“1.29”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-128Goldboro · goldGrade: 0.67Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- RC-26-128
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.67
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 22 m
- To
- 40 m
- Hole Depth
- 50 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-128:22-40
- Mining Method
- open_pit
Location
- Easting
- 5006423.8
- Northing
- 606535.6
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, contributing to the infill program's data.
Evidence · table
“0.67”
Context: 18.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-128Goldboro · goldGrade: 0.38Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-128
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 44 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-128:44-50
- Mining Method
- open_pit
Location
- Easting
- 5006423.8
- Northing
- 606535.6
- CRS
- NAD83 UTM
- Elevation
- 5004 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.38”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-129Goldboro · goldGrade: 4.13Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- RC-26-129
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.13
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 11 m
- To
- 21 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-129:11-21
- Mining Method
- open_pit
Location
- Easting
- 5006417.6
- Northing
- 606535.9
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, representing a highly material result for the infill program.
Evidence · table
“4.13”
Context: 10.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-129Goldboro · goldGrade: 29.03Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-129
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 29.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 15 m
- To
- 16 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-129:15-16
- Mining Method
- open_pit
Location
- Easting
- 5006417.6
- Northing
- 606535.9
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“29.03”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-129Goldboro · goldGrade: 1.25Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- RC-26-129
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 25 m
- To
- 33 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-129:25-33
- Mining Method
- open_pit
Location
- Easting
- 5006417.6
- Northing
- 606535.9
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the infill program's data.
Evidence · table
“1.25”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-129Goldboro · goldGrade: 3.04Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- RC-26-129
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 3.04
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 39 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-129:39-48
- Mining Method
- open_pit
Location
- Easting
- 5006417.6
- Northing
- 606535.9
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a good width, representing a highly material result for the infill program.
Evidence · table
“3.04”
Context: 9.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-129Goldboro · goldGrade: 14.49Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-129
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 14.49
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-129:44-45
- Mining Method
- open_pit
Location
- Easting
- 5006417.6
- Northing
- 606535.9
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“14.49”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-130Goldboro · goldGrade: 0.71Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-130
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.71
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 11 m
- To
- 18 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-130:11-18
- Mining Method
- open_pit
Location
- Easting
- 5006406
- Northing
- 606536.3
- CRS
- NAD83 UTM
- Elevation
- 5003.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the infill program's data.
Evidence · table
“0.71”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-130Goldboro · goldGrade: 2.82Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- RC-26-130
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.82
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 26 m
- To
- 37 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-130:26-37
- Mining Method
- open_pit
Location
- Easting
- 5006406
- Northing
- 606536.3
- CRS
- NAD83 UTM
- Elevation
- 5003.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, representing a highly material result for the infill program.
Evidence · table
“2.82”
Context: 11.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-130Goldboro · goldGrade: 17.73Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-130
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 17.73
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 27 m
- To
- 28 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-130:27-28
- Mining Method
- open_pit
Location
- Easting
- 5006406
- Northing
- 606536.3
- CRS
- NAD83 UTM
- Elevation
- 5003.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“17.73”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-130Goldboro · goldGrade: 4.95Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-130
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.95
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 44 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-130:44-50
- Mining Method
- open_pit
Location
- Easting
- 5006406
- Northing
- 606536.3
- CRS
- NAD83 UTM
- Elevation
- 5003.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a reasonable width, significantly contributing to the infill program.
Evidence · table
“4.95”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-130Goldboro · goldGrade: 23.78Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-130
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 23.78
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 48 m
- To
- 49 m
- Hole Depth
- 50 m
- Intercept Depth
- 11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-130:48-49
- Mining Method
- open_pit
Location
- Easting
- 5006406
- Northing
- 606536.3
- CRS
- NAD83 UTM
- Elevation
- 5003.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“23.78”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-131Goldboro · goldGrade: 0.36Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-131
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 12 m
- To
- 15 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-131:12-15
- Mining Method
- open_pit
Location
- Easting
- 5006392.1
- Northing
- 606536.5
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.36”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-131Goldboro · goldGrade: 0.3Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-131
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 19 m
- To
- 25 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-131:19-25
- Mining Method
- open_pit
Location
- Easting
- 5006392.1
- Northing
- 606536.5
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.30”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-131Goldboro · goldGrade: 0.51Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-131
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 27 m
- To
- 31 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-131:27-31
- Mining Method
- open_pit
Location
- Easting
- 5006392.1
- Northing
- 606536.5
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.51”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-131Goldboro · goldGrade: 0.33Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-131
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 35 m
- To
- 39 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-131:35-39
- Mining Method
- open_pit
Location
- Easting
- 5006392.1
- Northing
- 606536.5
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.33”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-131Goldboro · goldGrade: 0.5Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- RC-26-131
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 42 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-131:42-50
- Mining Method
- open_pit
Location
- Easting
- 5006392.1
- Northing
- 606536.5
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a good width, contributing to the infill program's data.
Evidence · table
“0.50”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-134Goldboro · goldGrade: 2.54Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- RC-26-134
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.54
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 31 m
- To
- 42 m
- Hole Depth
- 47 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-134:31-42
- Mining Method
- open_pit
Location
- Easting
- 5006355.4
- Northing
- 606536
- CRS
- NAD83 UTM
- Elevation
- 5002.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, representing a highly material result for the infill program.
Evidence · table
“2.54”
Context: 11.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-138Goldboro · goldGrade: 4.7Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-138
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.7
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 31 m
- To
- 38 m
- Hole Depth
- 50 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-138:31-38
- Mining Method
- open_pit
Location
- Easting
- 5006354.9
- Northing
- 606548.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a good width, significantly contributing to the infill program.
Evidence · table
“4.70”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-138Goldboro · goldGrade: 11.89Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-138
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 11.89
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 35 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-138:35-36
- Mining Method
- open_pit
Location
- Easting
- 5006354.9
- Northing
- 606548.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“11.89”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-140Goldboro · goldGrade: 0.56Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-140
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 31 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-140:31-36
- Mining Method
- open_pit
Location
- Easting
- 5006380.2
- Northing
- 606548.8
- CRS
- NAD83 UTM
- Elevation
- 5002.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.56”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-140Goldboro · goldGrade: 0.77Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-140
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 47 m
- To
- 49 m
- Hole Depth
- 50 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-140:47-49
- Mining Method
- open_pit
Location
- Easting
- 5006380.2
- Northing
- 606548.8
- CRS
- NAD83 UTM
- Elevation
- 5002.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.77”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-141Goldboro · goldGrade: 0.29Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-141
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 19 m
- To
- 25 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-141:19-25
- Mining Method
- open_pit
Location
- Easting
- 5006392.5
- Northing
- 606548.4
- CRS
- NAD83 UTM
- Elevation
- 5003.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a reasonable width, contributing to the infill program's data but not highly material on its own.
Evidence · table
“0.29”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-141Goldboro · goldGrade: 0.47Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-141
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 26 m
- To
- 32 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-141:26-32
- Mining Method
- open_pit
Location
- Easting
- 5006392.5
- Northing
- 606548.4
- CRS
- NAD83 UTM
- Elevation
- 5003.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“0.47”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-141Goldboro · goldGrade: 1.8Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-141
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 45 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-141:45-50
- Mining Method
- open_pit
Location
- Easting
- 5006392.5
- Northing
- 606548.4
- CRS
- NAD83 UTM
- Elevation
- 5003.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, supporting the infill program's objective.
Evidence · table
“1.80”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-142Goldboro · goldGrade: 0.3Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- RC-26-142
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 12 m
- To
- 20 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-142:12-20
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606548.6
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -87 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a good width, contributing to the infill program's data but not highly material on its own.
Evidence · table
“0.30”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-142Goldboro · goldGrade: 1.32Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- RC-26-142
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.32
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 28 m
- To
- 45 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-142:28-45
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606548.6
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -87 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, positively contributing to the infill program.
Evidence · table
“1.32”
Context: 17.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-142Goldboro · goldGrade: 11.47Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-142
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 11.47
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 42 m
- To
- 43 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-142:42-43
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606548.6
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -87 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“11.47”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-143Goldboro · goldGrade: 0.97Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- RC-26-143
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 22 m
- To
- 42 m
- Hole Depth
- 50 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-143:22-42
- Mining Method
- open_pit
Location
- Easting
- 5006418.7
- Northing
- 606548.7
- CRS
- NAD83 UTM
- Elevation
- 5004.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, contributing to the infill program's data.
Evidence · table
“0.97”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-143Goldboro · goldGrade: 1.15Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-143
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 44 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-143:44-50
- Mining Method
- open_pit
Location
- Easting
- 5006418.7
- Northing
- 606548.7
- CRS
- NAD83 UTM
- Elevation
- 5004.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a reasonable width, contributing to the infill program's data.
Evidence · table
“1.15”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-144Goldboro · goldGrade: 1.02Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-144
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 12 m
- To
- 13 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-144:12-13
- Mining Method
- open_pit
Location
- Easting
- 5006429.9
- Northing
- 606547.3
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very narrow width, contributing to the infill program's data.
Evidence · table
“1.02”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-144Goldboro · goldGrade: 9.31Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-144
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 9.31
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 25 m
- To
- 32 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-144:25-32
- Mining Method
- open_pit
Location
- Easting
- 5006429.9
- Northing
- 606547.3
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows an exceptional bonanza gold grade over a good width, representing a highly material result for the infill program.
Evidence · table
“9.31”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-144Goldboro · goldGrade: 63.55Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-144
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 63.55
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 25 m
- To
- 26 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-144:25-26
- Mining Method
- open_pit
Location
- Easting
- 5006429.9
- Northing
- 606547.3
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“63.55”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-144Goldboro · goldGrade: 0.75Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-144
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 34 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-144:34-36
- Mining Method
- open_pit
Location
- Easting
- 5006429.9
- Northing
- 606547.3
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.75”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-144Goldboro · goldGrade: 0.26Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-144
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 40 m
- To
- 47 m
- Hole Depth
- 50 m
- Intercept Depth
- 12 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-144:40-47
- Mining Method
- open_pit
Location
- Easting
- 5006429.9
- Northing
- 606547.3
- CRS
- NAD83 UTM
- Elevation
- 5004.4 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a good width, contributing to the infill program's data but not highly material on its own.
Evidence · table
“0.26”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-145Goldboro · goldGrade: 1.56Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-145
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.56
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 29 m
- To
- 31 m
- Hole Depth
- 48 m
- Intercept Depth
- 29 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-145:29-31
- Mining Method
- open_pit
Location
- Easting
- 5006430.3
- Northing
- 606560.9
- CRS
- NAD83 UTM
- Elevation
- 5004.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, supporting the infill program's objective.
Evidence · table
“1.56”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-145Goldboro · goldGrade: 0.74Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-145
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 34 m
- To
- 38 m
- Hole Depth
- 48 m
- Intercept Depth
- 29 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-145:34-38
- Mining Method
- open_pit
Location
- Easting
- 5006430.3
- Northing
- 606560.9
- CRS
- NAD83 UTM
- Elevation
- 5004.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.74”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-145Goldboro · goldGrade: 0.29Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-145
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 43 m
- To
- 48 m
- Hole Depth
- 48 m
- Intercept Depth
- 29 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-145:43-48
- Mining Method
- open_pit
Location
- Easting
- 5006430.3
- Northing
- 606560.9
- CRS
- NAD83 UTM
- Elevation
- 5004.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a reasonable width, contributing to the infill program's data but not highly material on its own.
Evidence · table
“0.29”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-146Goldboro · goldGrade: 1.65Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- RC-26-146
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.65
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 28 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-146:28-48
- Mining Method
- open_pit
Location
- Easting
- 5006417.4
- Northing
- 606560.9
- CRS
- NAD83 UTM
- Elevation
- 5005.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a very significant width, representing a highly material result for the infill program.
Evidence · table
“1.65”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-147Goldboro · goldGrade: 12.06Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-147
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 12.06
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 44 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 44 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-147:44-50
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606561.2
- CRS
- NAD83 UTM
- Elevation
- 5004.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows an exceptional bonanza gold grade over a reasonable width, representing a highly material result for the infill program.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“12.06”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-147Goldboro · goldGrade: 67.41Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-147
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 67.41
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 47 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 44 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-147:47-48
- Mining Method
- open_pit
Location
- Easting
- 5006405
- Northing
- 606561.2
- CRS
- NAD83 UTM
- Elevation
- 5004.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional bonanza gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Bonanza grade gold intercept.
Evidence · table
“67.41”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-148Goldboro · goldGrade: 0.43Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- RC-26-148
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 21 m
- To
- 33 m
- Hole Depth
- 50 m
- Intercept Depth
- 21 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-148:21-33
- Mining Method
- open_pit
Location
- Easting
- 5006392.7
- Northing
- 606561.2
- CRS
- NAD83 UTM
- Elevation
- 5003.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a significant width, contributing to the infill program's data.
Evidence · table
“0.43”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-148Goldboro · goldGrade: 4.41Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-148
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.41
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 34 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 21 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-148:34-36
- Mining Method
- open_pit
Location
- Easting
- 5006392.7
- Northing
- 606561.2
- CRS
- NAD83 UTM
- Elevation
- 5003.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a narrow width, significantly contributing to the infill program.
Evidence · table
“4.41”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-148Goldboro · goldGrade: 0.78Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-148
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 38 m
- To
- 42 m
- Hole Depth
- 50 m
- Intercept Depth
- 21 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-148:38-42
- Mining Method
- open_pit
Location
- Easting
- 5006392.7
- Northing
- 606561.2
- CRS
- NAD83 UTM
- Elevation
- 5003.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.78”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
RC-26-148Goldboro · goldGrade: 0.49Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-148
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 47 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 21 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-148:47-50
- Mining Method
- open_pit
Location
- Easting
- 5006392.7
- Northing
- 606561.2
- CRS
- NAD83 UTM
- Elevation
- 5003.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-09T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, contributing to the infill program's data.
Evidence · table
“0.49”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "This information will be used in concert with more than 180,000 metres of diamond drill data currently available on the "
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.