NexGold Intersects 5.26 g/t Gold over 7.0 Metres and 7.08 g/t Gold over 5.0 Metres in RC Infill Drill Program at the Goldboro Gold Project, Nova Scotia
Original announcement by globenewswire on
- Company
- NexGold Mining Corp.
- Ticker
- NEXG
- Exchange
- Unavailable
- Region
- Nova Scotia
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-12 02:41:25 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
NexGold Mining Corp. announced additional results from its 40,000-metre RC infill drill program at the Goldboro Gold Project in Nova Scotia. The program, focused on increasing confidence in shallow Mineral Resources within planned west and east pits, returned high-grade gold intercepts including 5.26 g/t gold over 7.0 metres and 7.08 g/t gold over 5.0 metres. These results are expected to support future Mineral Resource estimates and a potential investment decision for the project.
Reasoning: NexGold's infill drill program at the Goldboro Gold Project has yielded numerous high-grade gold intercepts, including bonanza grades, which are highly material. The program's objective to upgrade resource classification and support a final investment decision is a significant de-risking step. While the infill nature limits novelty, the strong grades and detailed QA/QC provide high confidence in the results, despite the lack of specific true width for each intercept.
Positive factors
- High-grade gold intercepts, including bonanza grades, confirm and enhance the known mineralization within the planned pit areas.
- The infill drill program is designed to increase confidence in the Mineral Resources and Mineral Reserves, supporting future classification upgrades.
- Comprehensive QA/QC procedures are disclosed, including certified lab use and QP sign-off, enhancing data reliability.
- The drilling results are consistent with the geological model and previous diamond drilling, providing additional definition at a higher density.
Negative factors
- True width is not provided for individual intercepts, only a general range, which may overstate actual thickness for some intervals.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 83
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Intercepts like 31.29 g/t Au over 1.0 m and 25.11 g/t Au over 1.0 m are exceptionally high-grade, well above the deposit-type norm for open pit gold.
Evidence · text
“31.29 g/t Au over 1.0 m (from 44.0 to 45.0 m) in drill hole RC-26-226; 7.08 g/t Au over 5.0 m (from 9.0 m to 14.0 m), including 25.11 g/t Au over 1.0 m in drill hole RC-26-195”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The program is explicitly described as an 'RC Infill Drill Program' designed to 'infill specific areas' and 'further increase confidence in the Mineral Resources and Mineral Reserves'.
Evidence · text
“detailed Reverse Circulation infill drill program (“ RC Infill Drill Program ”) at the Company’s Goldboro Gold Project”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a dedicated 'QA/QC' section detailing procedures, certified lab use (ALS), and the involvement of a Qualified Person.
Evidence · text
“The Company has implemented a quality assurance and quality control (“ QA/QC ”) program to ensure that sampling and analytical procedures for exploration work are conducted in accordance with CIM Exploration Best Practice Guidelines.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document states that 'True width of mineralization varies between 50 and 100% depending on the location of the drillhole and orientation of the mineralized zone' but does not provide specific true widths for individual intercepts.
Evidence · text
“True width of mineralization varies between 50 and 100% depending on the location of the drillhole and orientation of the mineralized zone.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Paul McNeill, P.Geo., VP Exploration of NexGold, is named as a 'Qualified Person' and has approved the scientific and technical disclosure.
Evidence · text
“Paul McNeill, P.Geo., VP Exploration of NexGold, is a “Qualified Person” as defined under National Instrument 43-101 - Standards of Disclosure for Mineral Projects and has reviewed the available data, composites and QA/QC information related to the drill program and has approved the scientific and technical disclosure contained in this news release on behalf of NexGold.”
Extracted facts
Stored fact records: 83. Some facts used in scoring do not have a stored record.
Drill Results (83)
RC-26-161Goldboro · goldGrade: 0.93Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-161
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.93
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 25 m
- To
- 27 m
- Hole Depth
- 37 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-161:25-27
- Mining Method
- open_pit
Location
- Easting
- 606598.7
- Northing
- 5006443.1
- CRS
- NAD83 UTM
- Elevation
- 5003.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project but not exceptionally high.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.93”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-161Goldboro · goldGrade: 0.95Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-161
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.95
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 30 m
- To
- 36 m
- Hole Depth
- 37 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-161:30-36
- Mining Method
- open_pit
Location
- Easting
- 606598.7
- Northing
- 5006443.1
- CRS
- NAD83 UTM
- Elevation
- 5003.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a reasonable width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a reasonable width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.95”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-163Goldboro · goldGrade: 0.9Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- RC-26-163
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 25 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-163:25-36
- Mining Method
- open_pit
Location
- Easting
- 606610.7
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a significant width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.90”
Context: 11.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-163Goldboro · goldGrade: 14.97Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-163
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 14.97
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 38 m
- To
- 40 m
- Hole Depth
- 50 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-163:38-40
- Mining Method
- open_pit
Location
- Easting
- 606610.7
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept represents a bonanza-grade gold zone, which is highly material and significantly enhances the project's value. It confirms the presence of very high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows a very high-grade gold zone, significantly above typical open pit grades.
- This bonanza grade enhances the overall resource potential and confidence in the area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“14.97”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-163Goldboro · goldGrade: 29.62Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-163
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 29.62
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 39 m
- To
- 40 m
- Hole Depth
- 50 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-163:39-40
- Mining Method
- open_pit
Location
- Easting
- 606610.7
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept represents an exceptionally high-grade bonanza gold zone, which is highly material and significantly enhances the project's value. It confirms the presence of very high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- This is an exceptionally high-grade bonanza gold intercept, significantly boosting the project's potential.
- The infill drilling confirms the presence of very high-grade mineralization, increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“29.62”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-164Goldboro · goldGrade: 0.76Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-164
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 24 m
- To
- 26 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-164:24-26
- Mining Method
- open_pit
Location
- Easting
- 606611.1
- Northing
- 5006467.5
- CRS
- NAD83 UTM
- Elevation
- 5003.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.76”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-164Goldboro · goldGrade: 1.34Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-164
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.34
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 43 m
- To
- 44 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-164:43-44
- Mining Method
- open_pit
Location
- Easting
- 606611.1
- Northing
- 5006467.5
- CRS
- NAD83 UTM
- Elevation
- 5003.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.34”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-165Goldboro · goldGrade: 1.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-165
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-165:24-25
- Mining Method
- open_pit
Location
- Easting
- 606611
- Northing
- 5006479.8
- CRS
- NAD83 UTM
- Elevation
- 5003.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.01”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-167Goldboro · goldGrade: 1.64Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-167
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.64
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 27 m
- To
- 28 m
- Hole Depth
- 42 m
- Intercept Depth
- 27 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-167:27-28
- Mining Method
- open_pit
Location
- Easting
- 606623.5
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5003 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade, contributing to the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.64”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-167Goldboro · goldGrade: 0.35Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-167
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 30 m
- To
- 33 m
- Hole Depth
- 42 m
- Intercept Depth
- 27 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-167:30-33
- Mining Method
- open_pit
Location
- Easting
- 606623.5
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5003 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is just above the weak threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.35”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-167Goldboro · goldGrade: 1.6Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-167
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 36 m
- To
- 42 m
- Hole Depth
- 42 m
- Intercept Depth
- 27 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-167:36-42
- Mining Method
- open_pit
Location
- Easting
- 606623.5
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5003 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.60”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-168Goldboro · goldGrade: 5.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-168
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 5.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 7 m
- To
- 8 m
- Hole Depth
- 42 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-168:7-8
- Mining Method
- open_pit
Location
- Easting
- 606623.6
- Northing
- 5006467.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade for gold, which is highly material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows an exceptional grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“5.10”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-168Goldboro · goldGrade: 1.09Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- RC-26-168
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.09
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 25 m
- To
- 34 m
- Hole Depth
- 42 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-168:25-34
- Mining Method
- open_pit
Location
- Easting
- 606623.6
- Northing
- 5006467.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a significant width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.09”
Context: 9.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-168Goldboro · goldGrade: 5.42Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-168
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 5.42
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 36 m
- To
- 39 m
- Hole Depth
- 42 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-168:36-39
- Mining Method
- open_pit
Location
- Easting
- 606623.6
- Northing
- 5006467.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade for gold, which is highly material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows an exceptional grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“5.42”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-168Goldboro · goldGrade: 15.69Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-168
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 15.69
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 36 m
- To
- 37 m
- Hole Depth
- 42 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-168:36-37
- Mining Method
- open_pit
Location
- Easting
- 606623.6
- Northing
- 5006467.5
- CRS
- NAD83 UTM
- Elevation
- 5002.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept represents an exceptionally high-grade bonanza gold zone, which is highly material and significantly enhances the project's value. It confirms the presence of very high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- This is an exceptionally high-grade bonanza gold intercept, significantly boosting the project's potential.
- The infill drilling confirms the presence of very high-grade mineralization, increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“15.69”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-170Goldboro · goldGrade: 0.74Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-170
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 6 m
- To
- 9 m
- Hole Depth
- 50 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-170:6-9
- Mining Method
- open_pit
Location
- Easting
- 606636.4
- Northing
- 5006480.1
- CRS
- NAD83 UTM
- Elevation
- 5002.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.74”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-172Goldboro · goldGrade: 4.49Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-172
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.49
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 34 m
- To
- 36 m
- Hole Depth
- 48 m
- Intercept Depth
- 34 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-172:34-36
- Mining Method
- open_pit
Location
- Easting
- 606635.8
- Northing
- 5006455.6
- CRS
- NAD83 UTM
- Elevation
- 5002.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows a strong grade for gold, which is material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows a strong grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“4.49”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-172Goldboro · goldGrade: 8.72Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-172
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 8.72
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 35 m
- To
- 36 m
- Hole Depth
- 48 m
- Intercept Depth
- 34 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-172:35-36
- Mining Method
- open_pit
Location
- Easting
- 606635.8
- Northing
- 5006455.6
- CRS
- NAD83 UTM
- Elevation
- 5002.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept represents an exceptionally high-grade bonanza gold zone, which is highly material and significantly enhances the project's value. It confirms the presence of very high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- This is an exceptionally high-grade bonanza gold intercept, significantly boosting the project's potential.
- The infill drilling confirms the presence of very high-grade mineralization, increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“8.72”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-173Goldboro · goldGrade: 1.11Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-173
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 7 m
- To
- 10 m
- Hole Depth
- 35 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-173:7-10
- Mining Method
- open_pit
Location
- Easting
- 606636.1
- Northing
- 5006442.2
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.11”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-174Goldboro · goldGrade: 4.45Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-174
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.45
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 7 m
- To
- 8 m
- Hole Depth
- 33 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-174:7-8
- Mining Method
- open_pit
Location
- Easting
- 606648.3
- Northing
- 5006480.3
- CRS
- NAD83 UTM
- Elevation
- 5001.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows a strong grade for gold, which is material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows a strong grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“4.45”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-175Goldboro · goldGrade: 1.03Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-175
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 42 m
- Intercept Depth
- 23 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-175:23-24
- Mining Method
- open_pit
Location
- Easting
- 606648.6
- Northing
- 5006467.8
- CRS
- NAD83 UTM
- Elevation
- 5002.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.03”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-175Goldboro · goldGrade: 4.61Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-175
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 4.61
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 35 m
- To
- 36 m
- Hole Depth
- 42 m
- Intercept Depth
- 23 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-175:35-36
- Mining Method
- open_pit
Location
- Easting
- 606648.6
- Northing
- 5006467.8
- CRS
- NAD83 UTM
- Elevation
- 5002.4 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows a strong grade for gold, which is material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows a strong grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“4.61”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-176Goldboro · goldGrade: 18.54Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-176
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 18.54
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 16 m
- To
- 17 m
- Hole Depth
- 46 m
- Intercept Depth
- 16 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-176:16-17
- Mining Method
- open_pit
Location
- Easting
- 606648.5
- Northing
- 5006455.2
- CRS
- NAD83 UTM
- Elevation
- 5003.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept represents an exceptionally high-grade bonanza gold zone, which is highly material and significantly enhances the project's value. It confirms the presence of very high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- This is an exceptionally high-grade bonanza gold intercept, significantly boosting the project's potential.
- The infill drilling confirms the presence of very high-grade mineralization, increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“18.54”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-177Goldboro · goldGrade: 1.85Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-177
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.85
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 24 m
- To
- 25 m
- Hole Depth
- 25 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-177:24-25
- Mining Method
- open_pit
Location
- Easting
- 606648.3
- Northing
- 5006443.2
- CRS
- NAD83 UTM
- Elevation
- 5002.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade, contributing to the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.85”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-178Goldboro · goldGrade: 0.77Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-178
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 8 m
- To
- 10 m
- Hole Depth
- 42 m
- Intercept Depth
- 8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-178:8-10
- Mining Method
- open_pit
Location
- Easting
- 606661.1
- Northing
- 5006467.1
- CRS
- NAD83 UTM
- Elevation
- 5002.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.77”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-178Goldboro · goldGrade: 0.68Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-178
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 36 m
- To
- 38 m
- Hole Depth
- 42 m
- Intercept Depth
- 8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-178:36-38
- Mining Method
- open_pit
Location
- Easting
- 606661.1
- Northing
- 5006467.1
- CRS
- NAD83 UTM
- Elevation
- 5002.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.68”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-179Goldboro · goldGrade: 0.89Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-179
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 25 m
- To
- 27 m
- Hole Depth
- 39 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-179:25-27
- Mining Method
- open_pit
Location
- Easting
- 606661.6
- Northing
- 5006454.9
- CRS
- NAD83 UTM
- Elevation
- 5002.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.89”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-179Goldboro · goldGrade: 1.37Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-179
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.37
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 38 m
- To
- 39 m
- Hole Depth
- 39 m
- Intercept Depth
- 25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-179:38-39
- Mining Method
- open_pit
Location
- Easting
- 606661.6
- Northing
- 5006454.9
- CRS
- NAD83 UTM
- Elevation
- 5002.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.37”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-181Goldboro · goldGrade: 1.33Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-181
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.33
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 27 m
- To
- 32 m
- Hole Depth
- 36 m
- Intercept Depth
- 27 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-181:27-32
- Mining Method
- open_pit
Location
- Easting
- 606660.1
- Northing
- 5006428.6
- CRS
- NAD83 UTM
- Elevation
- 5001.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.33”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-182Goldboro · goldGrade: 0.35Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-182
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 24 m
- To
- 27 m
- Hole Depth
- 50 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-182:24-27
- Mining Method
- open_pit
Location
- Easting
- 606636
- Northing
- 5006392.7
- CRS
- NAD83 UTM
- Elevation
- 4998.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is just above the weak threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.35”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-183Goldboro · goldGrade: 0.26Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-183
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 28 m
- To
- 32 m
- Hole Depth
- 50 m
- Intercept Depth
- 28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-183:28-32
- Mining Method
- open_pit
Location
- Easting
- 606623.3
- Northing
- 5006392.8
- CRS
- NAD83 UTM
- Elevation
- 5000.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization but at a grade below the weak threshold for open pit gold, indicating limited economic significance for this interval.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is below the weak threshold for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.26”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-183Goldboro · goldGrade: 0.3Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-183
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 35 m
- To
- 39 m
- Hole Depth
- 50 m
- Intercept Depth
- 28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-183:35-39
- Mining Method
- open_pit
Location
- Easting
- 606623.3
- Northing
- 5006392.8
- CRS
- NAD83 UTM
- Elevation
- 5000.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at the weak threshold for open pit gold, contributing to the infill program's objective of increasing resource confidence.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.30”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-183Goldboro · goldGrade: 0.5Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- RC-26-183
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 44 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 28 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-183:44-50
- Mining Method
- open_pit
Location
- Easting
- 606623.3
- Northing
- 5006392.8
- CRS
- NAD83 UTM
- Elevation
- 5000.5 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade over a good width, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.50”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-185Goldboro · goldGrade: 0.37Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-185
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 47 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 47 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-185:47-50
- Mining Method
- open_pit
Location
- Easting
- 606636
- Northing
- 5006380.2
- CRS
- NAD83 UTM
- Elevation
- 5000.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is just above the weak threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.37”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-186Goldboro · goldGrade: 0.3Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-186
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 42 m
- To
- 47 m
- Hole Depth
- 50 m
- Intercept Depth
- 42 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-186:42-47
- Mining Method
- open_pit
Location
- Easting
- 606610.9
- Northing
- 5006392.7
- CRS
- NAD83 UTM
- Elevation
- 5001.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at the weak threshold for open pit gold, contributing to the infill program's objective of increasing resource confidence.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.30”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-187Goldboro · goldGrade: 1.05Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-187
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 10 m
- To
- 14 m
- Hole Depth
- 50 m
- Intercept Depth
- 10 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-187:10-14
- Mining Method
- open_pit
Location
- Easting
- 606636.1
- Northing
- 5006376.1
- CRS
- NAD83 UTM
- Elevation
- 5000.1 m
- Azimuth
- 180 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.05”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-187Goldboro · goldGrade: 0.61Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-187
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.61
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 16 m
- To
- 18 m
- Hole Depth
- 50 m
- Intercept Depth
- 10 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-187:16-18
- Mining Method
- open_pit
Location
- Easting
- 606636.1
- Northing
- 5006376.1
- CRS
- NAD83 UTM
- Elevation
- 5000.1 m
- Azimuth
- 180 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.61”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-189Goldboro · goldGrade: 0.55Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-189
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 33 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 33 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-189:33-36
- Mining Method
- open_pit
Location
- Easting
- 606611.1
- Northing
- 5006380.1
- CRS
- NAD83 UTM
- Elevation
- 5001.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.55”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-189Goldboro · goldGrade: 0.94Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-189
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 44 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 33 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-189:44-48
- Mining Method
- open_pit
Location
- Easting
- 606611.1
- Northing
- 5006380.1
- CRS
- NAD83 UTM
- Elevation
- 5001.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.94”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-190Goldboro · goldGrade: 0.42Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-190
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 29 m
- To
- 34 m
- Hole Depth
- 50 m
- Intercept Depth
- 29 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-190:29-34
- Mining Method
- open_pit
Location
- Easting
- 606598.6
- Northing
- 5006392.6
- CRS
- NAD83 UTM
- Elevation
- 5001.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is just above the weak threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.42”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-190Goldboro · goldGrade: 0.91Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-190
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.91
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 41 m
- To
- 45 m
- Hole Depth
- 50 m
- Intercept Depth
- 29 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-190:41-45
- Mining Method
- open_pit
Location
- Easting
- 606598.6
- Northing
- 5006392.6
- CRS
- NAD83 UTM
- Elevation
- 5001.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.91”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-192Goldboro · goldGrade: 1.19Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-192
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.19
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 36 m
- To
- 41 m
- Hole Depth
- 50 m
- Intercept Depth
- 36 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-192:36-41
- Mining Method
- open_pit
Location
- Easting
- 606598.5
- Northing
- 5006355.1
- CRS
- NAD83 UTM
- Elevation
- 5002.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.19”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-193Goldboro · goldGrade: 0.89Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-193
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 15 m
- To
- 22 m
- Hole Depth
- 50 m
- Intercept Depth
- 15 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-193:15-22
- Mining Method
- open_pit
Location
- Easting
- 606586
- Northing
- 5006392.7
- CRS
- NAD83 UTM
- Elevation
- 5002.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a significant width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.89”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-193Goldboro · goldGrade: 0.52Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-193
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.52
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 27 m
- To
- 34 m
- Hole Depth
- 50 m
- Intercept Depth
- 15 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-193:27-34
- Mining Method
- open_pit
Location
- Easting
- 606586
- Northing
- 5006392.7
- CRS
- NAD83 UTM
- Elevation
- 5002.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade over a significant width, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.52”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-193Goldboro · goldGrade: 0.74Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- RC-26-193
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 36 m
- To
- 44 m
- Hole Depth
- 50 m
- Intercept Depth
- 15 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-193:36-44
- Mining Method
- open_pit
Location
- Easting
- 606586
- Northing
- 5006392.7
- CRS
- NAD83 UTM
- Elevation
- 5002.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade over a significant width, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.74”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-194Goldboro · goldGrade: 0.36Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-194
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 31 m
- To
- 36 m
- Hole Depth
- 50 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-194:31-36
- Mining Method
- open_pit
Location
- Easting
- 606586.1
- Northing
- 5006379.8
- CRS
- NAD83 UTM
- Elevation
- 5003.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is just above the weak threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.36”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-195Goldboro · goldGrade: 7.08Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-195
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 7.08
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 9 m
- To
- 14 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-195:9-14
- Mining Method
- open_pit
Location
- Easting
- 606586.1
- Northing
- 5006367.6
- CRS
- NAD83 UTM
- Elevation
- 5003.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade for gold over a good width, which is highly material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows an exceptional grade for gold over a good width in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“7.08”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-195Goldboro · goldGrade: 25.11Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-195
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 25.11
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 9 m
- To
- 10 m
- Hole Depth
- 50 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-195:9-10
- Mining Method
- open_pit
Location
- Easting
- 606586.1
- Northing
- 5006367.6
- CRS
- NAD83 UTM
- Elevation
- 5003.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept represents an exceptionally high-grade bonanza gold zone, which is highly material and significantly enhances the project's value. It confirms the presence of very high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- This is an exceptionally high-grade bonanza gold intercept, significantly boosting the project's potential.
- The infill drilling confirms the presence of very high-grade mineralization, increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“25.11”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-196Goldboro · goldGrade: 1.84Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-196
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.84
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 35 m
- To
- 39 m
- Hole Depth
- 50 m
- Intercept Depth
- 35 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-196:35-39
- Mining Method
- open_pit
Location
- Easting
- 606586.1
- Northing
- 5006355.2
- CRS
- NAD83 UTM
- Elevation
- 5003.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.84”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-202Goldboro · goldGrade: 1.05Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-202
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.05
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 39 m
- To
- 40 m
- Hole Depth
- 50 m
- Intercept Depth
- 39 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-202:39-40
- Mining Method
- open_pit
Location
- Easting
- 606598.8
- Northing
- 5006330.1
- CRS
- NAD83 UTM
- Elevation
- 5001.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.05”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-212Goldboro · goldGrade: 5.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-212
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 5.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 49 m
- To
- 50 m
- Hole Depth
- 50 m
- Intercept Depth
- 49 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-212:49-50
- Mining Method
- open_pit
Location
- Easting
- 606610.8
- Northing
- 5006333.4
- CRS
- NAD83 UTM
- Elevation
- 5000.5 m
- Azimuth
- 0 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade for gold, which is highly material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows an exceptional grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“5.20”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-215Goldboro · goldGrade: 1.12Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-215
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.12
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 26 m
- To
- 28 m
- Hole Depth
- 50 m
- Intercept Depth
- 26 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-215:26-28
- Mining Method
- open_pit
Location
- Easting
- 606673.3
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5002.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.12”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-215Goldboro · goldGrade: 1.55Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-215
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.55
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 41 m
- To
- 42 m
- Hole Depth
- 50 m
- Intercept Depth
- 26 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-215:41-42
- Mining Method
- open_pit
Location
- Easting
- 606673.3
- Northing
- 5006455.1
- CRS
- NAD83 UTM
- Elevation
- 5002.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade, contributing to the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.55”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-216Goldboro · goldGrade: 1.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-216
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 19 m
- To
- 20 m
- Hole Depth
- 41 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-216:19-20
- Mining Method
- open_pit
Location
- Easting
- 606673.5
- Northing
- 5006443.3
- CRS
- NAD83 UTM
- Elevation
- 5001.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade, contributing to the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.60”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-216Goldboro · goldGrade: 0.63Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-216
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 34 m
- To
- 36 m
- Hole Depth
- 41 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-216:34-36
- Mining Method
- open_pit
Location
- Easting
- 606673.5
- Northing
- 5006443.3
- CRS
- NAD83 UTM
- Elevation
- 5001.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.63”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-218Goldboro · goldGrade: 0.55Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-218
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 8 m
- To
- 11 m
- Hole Depth
- 39 m
- Intercept Depth
- 8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-218:8-11
- Mining Method
- open_pit
Location
- Easting
- 606686.3
- Northing
- 5006430
- CRS
- NAD83 UTM
- Elevation
- 5000.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.55”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-219Goldboro · goldGrade: 7.03Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-219
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 7.03
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Hole Depth
- 39 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-219:6-7
- Mining Method
- open_pit
Location
- Easting
- 606686.3
- Northing
- 5006442.5
- CRS
- NAD83 UTM
- Elevation
- 5000.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade for gold, which is highly material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows an exceptional grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“7.03”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-219Goldboro · goldGrade: 1.4Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-219
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 32 m
- To
- 39 m
- Hole Depth
- 39 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-219:32-39
- Mining Method
- open_pit
Location
- Easting
- 606686.3
- Northing
- 5006442.5
- CRS
- NAD83 UTM
- Elevation
- 5000.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a significant width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.40”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-220Goldboro · goldGrade: 0.71Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-220
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.71
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 31 m
- To
- 33 m
- Hole Depth
- 45 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-220:31-33
- Mining Method
- open_pit
Location
- Easting
- 606685.9
- Northing
- 5006455
- CRS
- NAD83 UTM
- Elevation
- 5000.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.71”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-220Goldboro · goldGrade: 0.59Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-220
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 43 m
- To
- 45 m
- Hole Depth
- 45 m
- Intercept Depth
- 31 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-220:43-45
- Mining Method
- open_pit
Location
- Easting
- 606685.9
- Northing
- 5006455
- CRS
- NAD83 UTM
- Elevation
- 5000.7 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.59”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-223Goldboro · goldGrade: 1.1Grade Unit: g/tIntercept: 10 mView all detailsHide details
Identity
- Hole ID
- RC-26-223
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 10 m
- From
- 7 m
- To
- 17 m
- Hole Depth
- 41 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-223:7-17
- Mining Method
- open_pit
Location
- Easting
- 606698.6
- Northing
- 5006442.7
- CRS
- NAD83 UTM
- Elevation
- 4999.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a significant width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.10”
Context: 10.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-223Goldboro · goldGrade: 2.44Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-223
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.44
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 33 m
- To
- 37 m
- Hole Depth
- 41 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-223:33-37
- Mining Method
- open_pit
Location
- Easting
- 606698.6
- Northing
- 5006442.7
- CRS
- NAD83 UTM
- Elevation
- 4999.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows a strong grade for gold over a good width, which is material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows a strong grade for gold over a good width in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“2.44”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-223Goldboro · goldGrade: 1.42Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-223
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.42
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 40 m
- To
- 41 m
- Hole Depth
- 41 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-223:40-41
- Mining Method
- open_pit
Location
- Easting
- 606698.6
- Northing
- 5006442.7
- CRS
- NAD83 UTM
- Elevation
- 4999.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.42”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-224Goldboro · goldGrade: 1.37Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-224
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.37
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 7 m
- To
- 12 m
- Hole Depth
- 36 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-224:7-12
- Mining Method
- open_pit
Location
- Easting
- 606698.2
- Northing
- 5006429.8
- CRS
- NAD83 UTM
- Elevation
- 5000.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.37”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-224Goldboro · goldGrade: 1.15Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-224
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 15 m
- To
- 19 m
- Hole Depth
- 36 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-224:15-19
- Mining Method
- open_pit
Location
- Easting
- 606698.2
- Northing
- 5006429.8
- CRS
- NAD83 UTM
- Elevation
- 5000.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.15”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-224Goldboro · goldGrade: 0.63Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-224
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 24 m
- To
- 27 m
- Hole Depth
- 36 m
- Intercept Depth
- 7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-224:24-27
- Mining Method
- open_pit
Location
- Easting
- 606698.2
- Northing
- 5006429.8
- CRS
- NAD83 UTM
- Elevation
- 5000.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.63”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-226Goldboro · goldGrade: 5.26Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-226
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 5.26
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 41 m
- To
- 48 m
- Hole Depth
- 50 m
- Intercept Depth
- 41 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-226:41-48
- Mining Method
- open_pit
Location
- Easting
- 606711.4
- Northing
- 5006455.2
- CRS
- NAD83 UTM
- Elevation
- 4999.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows an exceptional grade for gold over a significant width, which is highly material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows an exceptional grade for gold over a significant width in an open pit setting.
- This bonanza grade enhances the overall resource potential and confidence in the area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“5.26”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-226Goldboro · goldGrade: 31.29Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-226
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 31.29
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 50 m
- Intercept Depth
- 41 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-226:44-45
- Mining Method
- open_pit
Location
- Easting
- 606711.4
- Northing
- 5006455.2
- CRS
- NAD83 UTM
- Elevation
- 4999.3 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept represents an exceptionally high-grade bonanza gold zone, which is highly material and significantly enhances the project's value. It confirms the presence of very high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- This is an exceptionally high-grade bonanza gold intercept, significantly boosting the project's potential.
- The infill drilling confirms the presence of very high-grade mineralization, increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“31.29”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-227Goldboro · goldGrade: 1.61Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- RC-26-227
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.61
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 16 m
- To
- 23 m
- Hole Depth
- 44 m
- Intercept Depth
- 16 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-227:16-23
- Mining Method
- open_pit
Location
- Easting
- 606711
- Northing
- 5006442.6
- CRS
- NAD83 UTM
- Elevation
- 4999.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade over a significant width, supporting the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade over a significant width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.61”
Context: 7.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-228Goldboro · goldGrade: 1.23Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-228
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.23
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 23 m
- To
- 25 m
- Hole Depth
- 38 m
- Intercept Depth
- 23 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-228:23-25
- Mining Method
- open_pit
Location
- Easting
- 606710.8
- Northing
- 5006430
- CRS
- NAD83 UTM
- Elevation
- 4999.6 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.23”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-229Goldboro · goldGrade: 2.37Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-229
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.37
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 18 m
- To
- 19 m
- Hole Depth
- 36 m
- Intercept Depth
- 18 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-229:18-19
- Mining Method
- open_pit
Location
- Easting
- 606710.9
- Northing
- 5006417.5
- CRS
- NAD83 UTM
- Elevation
- 5000.2 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows a strong grade for gold, which is material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows a strong grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“2.37”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-256Goldboro · goldGrade: 2.35Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-256
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 2.35
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 6 m
- To
- 7 m
- Hole Depth
- 24 m
- Intercept Depth
- 6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-256:6-7
- Mining Method
- open_pit
Location
- Easting
- 606711
- Northing
- 5006380.1
- CRS
- NAD83 UTM
- Elevation
- 5002.1 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept shows a strong grade for gold, which is material and enhances the project's value. It confirms the presence of high-grade mineralization within the infill area, increasing confidence in the resource.
Positive factors
- The intercept shows a strong grade for gold in an open pit setting.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“2.35”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-261Goldboro · goldGrade: 1.06Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-261
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.06
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 9 m
- To
- 11 m
- Hole Depth
- 30 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-261:9-11
- Mining Method
- open_pit
Location
- Easting
- 606698.7
- Northing
- 5006373.4
- CRS
- NAD83 UTM
- Elevation
- 5001.7 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.06”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-310Goldboro · goldGrade: 1.26Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-310
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 10 m
- To
- 11 m
- Hole Depth
- 46 m
- Intercept Depth
- 10 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-310:10-11
- Mining Method
- open_pit
Location
- Easting
- 606711.5
- Northing
- 5006352
- CRS
- NAD83 UTM
- Elevation
- 5001.9 m
- Azimuth
- 0 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.26”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-310Goldboro · goldGrade: 0.59Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- RC-26-310
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 28 m
- To
- 31 m
- Hole Depth
- 46 m
- Intercept Depth
- 10 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-310:28-31
- Mining Method
- open_pit
Location
- Easting
- 606711.5
- Northing
- 5006352
- CRS
- NAD83 UTM
- Elevation
- 5001.9 m
- Azimuth
- 0 °
- Dip
- -85 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.59”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-313Goldboro · goldGrade: 0.91Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-313
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.91
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 9 m
- To
- 11 m
- Hole Depth
- 36 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-313:9-11
- Mining Method
- open_pit
Location
- Easting
- 606698.6
- Northing
- 5006330.2
- CRS
- NAD83 UTM
- Elevation
- 5001.8 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.91”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-317Goldboro · goldGrade: 0.6Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-317
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 23 m
- To
- 28 m
- Hole Depth
- 46 m
- Intercept Depth
- 23 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-317:23-28
- Mining Method
- open_pit
Location
- Easting
- 606673.3
- Northing
- 5006342.5
- CRS
- NAD83 UTM
- Elevation
- 5000.9 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade over a good width, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.60”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-320Goldboro · goldGrade: 0.77Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RC-26-320
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 22 m
- To
- 24 m
- Hole Depth
- 46 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-320:22-24
- Mining Method
- open_pit
Location
- Easting
- 606685.7
- Northing
- 5006342.4
- CRS
- NAD83 UTM
- Elevation
- 5001.3 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.77”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-320Goldboro · goldGrade: 1.79Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-320
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 26 m
- To
- 27 m
- Hole Depth
- 46 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-320:26-27
- Mining Method
- open_pit
Location
- Easting
- 606685.7
- Northing
- 5006342.4
- CRS
- NAD83 UTM
- Elevation
- 5001.3 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a strong grade, contributing to the infill program's objective of increasing resource confidence. The grade is above the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization at a strong grade within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- True width of the intercept is not specified.
Evidence · table
“1.79”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-320Goldboro · goldGrade: 0.52Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RC-26-320
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 0.52
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 30 m
- To
- 34 m
- Hole Depth
- 46 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-320:30-34
- Mining Method
- open_pit
Location
- Easting
- 606685.7
- Northing
- 5006342.4
- CRS
- NAD83 UTM
- Elevation
- 5001.3 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a weak grade over a good width, contributing to the infill program's objective of increasing resource confidence. The grade is below the moderate threshold for open pit gold.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is weak for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“0.52”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-320Goldboro · goldGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-320
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 44 m
- To
- 45 m
- Hole Depth
- 46 m
- Intercept Depth
- 22 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-320:44-45
- Mining Method
- open_pit
Location
- Easting
- 606685.7
- Northing
- 5006342.4
- CRS
- NAD83 UTM
- Elevation
- 5001.3 m
- Azimuth
- 180 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.10”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-322Goldboro · goldGrade: 1.03Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- RC-26-322
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 19 m
- To
- 24 m
- Hole Depth
- 46 m
- Intercept Depth
- 19 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-322:19-24
- Mining Method
- open_pit
Location
- Easting
- 606698.3
- Northing
- 5006343.3
- CRS
- NAD83 UTM
- Elevation
- 5001.9 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade over a good width, supporting the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization over a good width within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.03”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
RC-26-323Goldboro · goldGrade: 1.04Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RC-26-323
- Project
- Goldboro
- Commodity
- gold
- Region
- canada_ns
- Reported Region
- canada_ns
- Ticker
- NEXG
Geometry
- Grade
- 1.04
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 9 m
- To
- 10 m
- Hole Depth
- 39 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- RC-26-323:9-10
- Mining Method
- open_pit
Location
- Easting
- 606698.4
- Northing
- 5006350.4
- CRS
- NAD83 UTM
- Elevation
- 5001.7 m
- Azimuth
- 0 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-19T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization at a moderate grade, contributing to the infill program's objective of increasing resource confidence. The grade is within expected ranges for the project.
Positive factors
- The intercept confirms gold mineralization within the target area.
- The infill drilling contributes to increasing resource confidence.
Negative factors
- The grade is moderate for gold in an open pit setting.
- True width of the intercept is not specified.
Evidence · table
“1.04”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Company expects this information to be used in conjunction with more than 180,000 metres of existing diamond drill d"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.