# Nine Mile Metals DDH WD-26-11 Intersects 2 High Grade VMS Zones Over 27.6M Including 3.08% CU-EQ Over 10.70M, 3.27% CU-EQ Over 9.30M and 4.30% CU-EQ Over 5.0M Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b Original source: https://www.accessnewswire.com/newsroom/en/metals-and-mining/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27.6m-includ-1224524 Publisher: accesswire Original announcement: 2026-09-21T13:16:29.827Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Nine Mile Metals Ltd. - Ticker: NINE - Exchange: Unavailable - Region: New Brunswick - Primary commodity: Copper - Secondary commodities: Silver, Gold, Lead, Zinc - Document categories: Drill results - Extracted: 2026-09-21 13:18:49 UTC Narrative sentiment: 0.80 · Bullish ## Minestarters Atlas summary Nine Mile Metals announced high-grade polymetallic VMS drill results from DDH WD-26-11 at its Wedge Critical Minerals Project in New Brunswick. The hole intersected two distinct mineralized zones, including 3.08% Cu-Eq over 10.70m, 3.27% Cu-Eq over 9.30m, and 4.30% Cu-Eq over 5.0m. The company confirmed the true width of the intervals and disclosed robust QA/QC protocols. Reasoning: The drill results from DDH WD-26-11 show high-grade polymetallic VMS mineralization with significant copper equivalent values over substantial widths, confirming the robust nature of the Wedge project. The disclosure of true widths and comprehensive QA/QC adds confidence to the results. The presence of a void is noted but does not detract significantly from the overall positive outcome. - Positive factor: High-grade VMS mineralization intersected in two distinct zones - Positive factor: Significant copper equivalent grades, including 4.30% Cu-Eq over 5.0m - Positive factor: True width of intervals stated - Positive factor: Polymetallic nature of the deposit with increasing silver and gold at depth - Positive factor: QA/QC procedures disclosed and reviewed by a Qualified Person - Negative factor: Presence of a void in the upper zone, indicating a potential gap in mineralization or a historical mining activity Facts used in scoring: 182 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 182. Some facts used in scoring do not have a stored record. ## Drill Results (182) ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-0) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 31.98 - Grade Unit: g/t - Intercept: 9.3 m - True Width: 9.3 m - From: 89.9 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:89.9-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This silver grade is part of a high-grade polymetallic VMS intercept, contributing to the overall value of the zone. The disclosure of true width adds confidence. - Positive factor: High silver grade for the interval - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · table > 31.98 Context: 9.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-1) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.34 - Grade Unit: g/t - Intercept: 9.3 m - True Width: 9.3 m - From: 89.9 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:89.9-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The gold grade, while not exceptional on its own, adds to the polymetallic value of the VMS intercept. True width disclosure is a positive. - Positive factor: Gold grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.34 Context: 9.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-2) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.38 - Grade Unit: % - Intercept: 9.3 m - True Width: 9.3 m - From: 89.9 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:89.9-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This copper grade is strong for a VMS deposit and contributes significantly to the overall copper equivalent value. The true width disclosure is positive. - Positive factor: Strong copper grade for VMS deposit type - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · table > 2.38 Context: 9.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-3) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.12 - Grade Unit: % - Intercept: 9.3 m - True Width: 9.3 m - From: 89.9 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:89.9-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The lead grade is present and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.12 Context: 9.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-4) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.1 - Grade Unit: % - Intercept: 9.3 m - True Width: 9.3 m - From: 89.9 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:89.9-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The zinc grade is present and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.10 Context: 9.30 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-5) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 48.1 - Grade Unit: g/t - Intercept: 4.2 m - True Width: 4.2 m - From: 95 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:95-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This higher-grade silver sub-interval enhances the overall value of the upper zone. True width disclosure is positive. - Positive factor: Higher silver grade within the broader interval - Positive factor: True width disclosed Evidence · table > 48.10 Context: 4.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-6) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.4 - Grade Unit: g/t - Intercept: 4.2 m - True Width: 4.2 m - From: 95 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:95-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The gold grade, while not exceptional on its own, adds to the polymetallic value of the VMS intercept. True width disclosure is a positive. - Positive factor: Gold grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.40 Context: 4.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-7) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.92 - Grade Unit: % - Intercept: 4.2 m - True Width: 4.2 m - From: 95 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:95-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This copper grade is strong for a VMS deposit and contributes significantly to the overall copper equivalent value. The true width disclosure is positive. - Positive factor: Strong copper grade for VMS deposit type - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · table > 2.92 Context: 4.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-8) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 4.2 m - True Width: 4.2 m - From: 95 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:95-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The lead grade is present and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.14 Context: 4.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-9) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 4.2 m - True Width: 4.2 m - From: 95 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:95-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The zinc grade is present and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.14 Context: 4.20 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 4.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-10) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 29 - Grade Unit: g/t - Intercept: 0.5 m - True Width: 0.5 m - From: 102.9 m - To: 103.4 m - Hole Depth: 149 m - Intercept Depth: 102.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:102.9-103.4 - Mining Method: unknown #### Location - Location: Upper Zone Below Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.37 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This silver grade is part of a high-grade polymetallic VMS intercept, contributing to the overall value of the zone. The disclosure of true width adds confidence. - Positive factor: Good silver grade for the interval - Positive factor: True width disclosed Evidence · table > 29.00 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-11) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.29 - Grade Unit: g/t - Intercept: 0.5 m - True Width: 0.5 m - From: 102.9 m - To: 103.4 m - Hole Depth: 149 m - Intercept Depth: 102.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:102.9-103.4 - Mining Method: unknown #### Location - Location: Upper Zone Below Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The gold grade, while not exceptional on its own, adds to the polymetallic value of the VMS intercept. True width disclosure is a positive. - Positive factor: Gold grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.29 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-12) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 3.57 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.5 m - From: 102.9 m - To: 103.4 m - Hole Depth: 149 m - Intercept Depth: 102.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:102.9-103.4 - Mining Method: unknown #### Location - Location: Upper Zone Below Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.37 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This copper grade is strong for a VMS deposit and contributes significantly to the overall copper equivalent value. The true width disclosure is positive. - Positive factor: Strong copper grade for VMS deposit type - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · table > 3.57 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-13) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.21 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.5 m - From: 102.9 m - To: 103.4 m - Hole Depth: 149 m - Intercept Depth: 102.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:102.9-103.4 - Mining Method: unknown #### Location - Location: Upper Zone Below Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.37 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The lead grade is present and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.21 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-14) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 0.5 m - True Width: 0.5 m - From: 102.9 m - To: 103.4 m - Hole Depth: 149 m - Intercept Depth: 102.9 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:102.9-103.4 - Mining Method: unknown #### Location - Location: Upper Zone Below Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.37 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The zinc grade is present and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.11 Context: 0.50 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-15) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 51.86 - Grade Unit: g/t - Intercept: 10.7 m - True Width: 10.7 m - From: 110.5 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:110.5-121.2 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This silver grade is part of a high-grade polymetallic VMS intercept, contributing to the overall value of the zone. The disclosure of true width adds confidence. - Positive factor: High silver grade for the interval - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · table > 51.86 Context: 10.70 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 10.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-16) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.44 - Grade Unit: g/t - Intercept: 10.7 m - True Width: 10.7 m - From: 110.5 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:110.5-121.2 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The gold grade, while not exceptional on its own, adds to the polymetallic value of the VMS intercept. True width disclosure is a positive. - Positive factor: Gold grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.44 Context: 10.70 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 10.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-17) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.21 - Grade Unit: % - Intercept: 10.7 m - True Width: 10.7 m - From: 110.5 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:110.5-121.2 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This copper grade is strong for a VMS deposit and contributes significantly to the overall copper equivalent value. The true width disclosure is positive. - Positive factor: Strong copper grade for VMS deposit type - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · table > 1.21 Context: 10.70 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 10.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-18) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.7 - Grade Unit: % - Intercept: 10.7 m - True Width: 10.7 m - From: 110.5 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:110.5-121.2 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The lead grade is significant and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Significant lead grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 1.70 Context: 10.70 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 10.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-19) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.44 - Grade Unit: % - Intercept: 10.7 m - True Width: 10.7 m - From: 110.5 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:110.5-121.2 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The zinc grade is significant and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Significant zinc grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 1.44 Context: 10.70 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 10.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-20) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 72.6 - Grade Unit: g/t - Intercept: 5 m - True Width: 5 m - From: 114.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:114.5-119.5 - Mining Method: unknown #### Location - Location: Lower Zone Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This very high-grade silver sub-interval significantly enhances the overall value of the lower zone. True width disclosure is positive. - Positive factor: Very high silver grade within the broader interval - Positive factor: True width disclosed Evidence · table > 72.60 Context: 5.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-21) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.57 - Grade Unit: g/t - Intercept: 5 m - True Width: 5 m - From: 114.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:114.5-119.5 - Mining Method: unknown #### Location - Location: Lower Zone Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The gold grade, while not exceptional on its own, adds to the polymetallic value of the VMS intercept. True width disclosure is a positive. - Positive factor: Higher gold grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 0.57 Context: 5.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-22) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.5 - Grade Unit: % - Intercept: 5 m - True Width: 5 m - From: 114.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:114.5-119.5 - Mining Method: unknown #### Location - Location: Lower Zone Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This copper grade is strong for a VMS deposit and contributes significantly to the overall copper equivalent value. The true width disclosure is positive. - Positive factor: Strong copper grade for VMS deposit type - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · table > 1.50 Context: 5.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-23) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.74 - Grade Unit: % - Intercept: 5 m - True Width: 5 m - From: 114.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:114.5-119.5 - Mining Method: unknown #### Location - Location: Lower Zone Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The lead grade is significant and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Significant lead grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 2.74 Context: 5.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-24) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.69 - Grade Unit: % - Intercept: 5 m - True Width: 5 m - From: 114.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:114.5-119.5 - Mining Method: unknown #### Location - Location: Lower Zone Including - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The zinc grade is significant and contributes to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Significant zinc grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · table > 2.69 Context: 5.00 #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-25) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 87 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 116.5 m - To: 117.5 m - Hole Depth: 149 m - Intercept Depth: 116.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:116.5-117.5 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 5.68 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This very high-grade silver sample is a highlight within the lower zone, indicating strong mineralization. True width disclosure is positive. - Positive factor: Very high silver grade for the interval - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · text > Sample \# 396531 returned \(87 g/t Ag, 0.85 g/t Au, 1.06% Cu, 4.33% Pb, 6.75% Zn\) 5.68% CuEq. #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-26) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.85 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 116.5 m - To: 117.5 m - Hole Depth: 149 m - Intercept Depth: 116.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:116.5-117.5 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This gold grade, while not exceptional on its own, adds to the polymetallic value of the VMS intercept. True width disclosure is a positive. - Positive factor: Higher gold grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · text > Sample \# 396531 returned \(87 g/t Ag, 0.85 g/t Au, 1.06% Cu, 4.33% Pb, 6.75% Zn\) 5.68% CuEq. #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-27) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.06 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 116.5 m - To: 117.5 m - Hole Depth: 149 m - Intercept Depth: 116.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:116.5-117.5 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 5.68 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This copper grade is strong for a VMS deposit and contributes significantly to the overall copper equivalent value. The true width disclosure is positive. - Positive factor: Strong copper grade for VMS deposit type - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · text > Sample \# 396531 returned \(87 g/t Ag, 0.85 g/t Au, 1.06% Cu, 4.33% Pb, 6.75% Zn\) 5.68% CuEq. #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-28) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 4.33 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 116.5 m - To: 117.5 m - Hole Depth: 149 m - Intercept Depth: 116.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:116.5-117.5 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 5.68 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The lead grade is very high and contributes significantly to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Very high lead grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · text > Sample \# 396531 returned \(87 g/t Ag, 0.85 g/t Au, 1.06% Cu, 4.33% Pb, 6.75% Zn\) 5.68% CuEq. #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-29) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 6.75 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 116.5 m - To: 117.5 m - Hole Depth: 149 m - Intercept Depth: 116.5 m #### Classification - Deposit Type: vms - Program: exploration - Sample Type: drill - Group ID: WD-26-11:116.5-117.5 - Mining Method: unknown #### Location - Location: Lower Zone - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 5.68 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: The zinc grade is very high and contributes significantly to the polymetallic nature of the VMS mineralization. True width disclosure is positive. - Positive factor: Very high zinc grade contributes to polymetallic nature - Positive factor: True width disclosed Evidence · text > Sample \# 396531 returned \(87 g/t Ag, 0.85 g/t Au, 1.06% Cu, 4.33% Pb, 6.75% Zn\) 5.68% CuEq. #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-30) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.016 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 86.5 m - To: 88 m - Hole Depth: 149 m - Intercept Depth: 86.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:86.5-88 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.016 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.016 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.016 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-31) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 86.5 m - To: 88 m - Hole Depth: 149 m - Intercept Depth: 86.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:86.5-88 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-32) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 86.5 m - To: 88 m - Hole Depth: 149 m - Intercept Depth: 86.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:86.5-88 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-33) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 86.5 m - To: 88 m - Hole Depth: 149 m - Intercept Depth: 86.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:86.5-88 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-34) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.016 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 88 m - To: 89 m - Hole Depth: 149 m - Intercept Depth: 88 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:88-89 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.016 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.016 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.016 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-35) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 88 m - To: 89 m - Hole Depth: 149 m - Intercept Depth: 88 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:88-89 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.04 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.04 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.04 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-36) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 88 m - To: 89 m - Hole Depth: 149 m - Intercept Depth: 88 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:88-89 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-37) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 88 m - To: 89 m - Hole Depth: 149 m - Intercept Depth: 88 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:88-89 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-38) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.017 - Grade Unit: g/t - Intercept: 0.9 m - True Width: 0.9 m - From: 89 m - To: 89.9 m - Hole Depth: 149 m - Intercept Depth: 89 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89-89.9 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.017 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.017 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.017 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-39) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.9 m - From: 89 m - To: 89.9 m - Hole Depth: 149 m - Intercept Depth: 89 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89-89.9 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.02 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.02 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.02 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-40) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.9 m - From: 89 m - To: 89.9 m - Hole Depth: 149 m - Intercept Depth: 89 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89-89.9 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-41) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.9 m - From: 89 m - To: 89.9 m - Hole Depth: 149 m - Intercept Depth: 89 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89-89.9 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-42) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 14 - Grade Unit: g/t - Intercept: 2.1 m - True Width: 2.1 m - From: 89.9 m - To: 92 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89.9-92 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.7 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 14 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 29.4 g/t·m is below. - Negative factor: 14 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 14 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-43) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.242 - Grade Unit: g/t - Intercept: 2.1 m - True Width: 2.1 m - From: 89.9 m - To: 92 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89.9-92 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.7 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.242 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below. - Negative factor: 0.242 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.242 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-44) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.21 - Grade Unit: % - Intercept: 2.1 m - True Width: 2.1 m - From: 89.9 m - To: 92 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89.9-92 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.7 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 2.21 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 4.6 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 2.21 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.21 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-45) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.1 - Grade Unit: % - Intercept: 2.1 m - True Width: 2.1 m - From: 89.9 m - To: 92 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89.9-92 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.7 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.1 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.2 %·m is below. - Negative factor: 0.1 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.10 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-46) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 2.1 m - True Width: 2.1 m - From: 89.9 m - To: 92 m - Hole Depth: 149 m - Intercept Depth: 89.9 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:89.9-92 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.7 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.05 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.05 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.05 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 2.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-47) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 16 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 92 m - To: 93.5 m - Hole Depth: 149 m - Intercept Depth: 92 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:92-93.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 16 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 24.0 g/t·m is below. - Negative factor: 16 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 16 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-48) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.31 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 92 m - To: 93.5 m - Hole Depth: 149 m - Intercept Depth: 92 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:92-93.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.31 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.31 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-49) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.52 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 92 m - To: 93.5 m - Hole Depth: 149 m - Intercept Depth: 92 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:92-93.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.52 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 2.3 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 1.52 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.52 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-50) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.12 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 92 m - To: 93.5 m - Hole Depth: 149 m - Intercept Depth: 92 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:92-93.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.12 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.2 %·m is below. - Negative factor: 0.12 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.12 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-51) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.06 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 92 m - To: 93.5 m - Hole Depth: 149 m - Intercept Depth: 92 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:92-93.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.06 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.06 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-52) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 28 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 93.5 m - To: 95 m - Hole Depth: 149 m - Intercept Depth: 93.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:93.5-95 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.82 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 28 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 42.0 g/t·m is below. - Negative factor: 28 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 28 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-53) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.372 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 93.5 m - To: 95 m - Hole Depth: 149 m - Intercept Depth: 93.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:93.5-95 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.82 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.372 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.6 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.372 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-54) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.97 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 93.5 m - To: 95 m - Hole Depth: 149 m - Intercept Depth: 93.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:93.5-95 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.82 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.97 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 3.0 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 1.97 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.97 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-55) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.09 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 93.5 m - To: 95 m - Hole Depth: 149 m - Intercept Depth: 93.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:93.5-95 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.82 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.09 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.09 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.09 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-56) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.1 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 93.5 m - To: 95 m - Hole Depth: 149 m - Intercept Depth: 93.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:93.5-95 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.82 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.2 %·m is below. - Negative factor: 0.1 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.10 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-57) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 23 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 95 m - To: 96 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:95-96 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.14 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 23 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 23.0 g/t·m is below. - Negative factor: 23 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 23 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-58) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.39 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 95 m - To: 96 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:95-96 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.14 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.39 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.4 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.39 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-59) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.35 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 95 m - To: 96 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:95-96 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.14 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 2.35 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 2.4 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 2.35 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.35 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-60) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 95 m - To: 96 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:95-96 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.14 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.14 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.14 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.14 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-61) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.09 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 95 m - To: 96 m - Hole Depth: 149 m - Intercept Depth: 95 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:95-96 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.14 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.09 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.09 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.09 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-62) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 27 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 96 m - To: 97 m - Hole Depth: 149 m - Intercept Depth: 96 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:96-97 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.98 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 27 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 27.0 g/t·m is below. - Negative factor: 27 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 27 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-63) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.472 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 96 m - To: 97 m - Hole Depth: 149 m - Intercept Depth: 96 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:96-97 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.98 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.472 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.472 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-64) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 3.04 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 96 m - To: 97 m - Hole Depth: 149 m - Intercept Depth: 96 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:96-97 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.98 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 3.04 % copper is exceptional against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 3.0 %·m is below \(grade alone is exceptional; the better of the two is used\). - Positive factor: 3.04 % copper is exceptional on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 3.04 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-65) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.14 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 96 m - To: 97 m - Hole Depth: 149 m - Intercept Depth: 96 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:96-97 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.98 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.14 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.14 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.14 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-66) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.1 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 96 m - To: 97 m - Hole Depth: 149 m - Intercept Depth: 96 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:96-97 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.98 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.1 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.10 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-67) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 32 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 97 m - To: 98 m - Hole Depth: 149 m - Intercept Depth: 97 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:97-98 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 32 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 32.0 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 32 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-68) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.407 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 97 m - To: 98 m - Hole Depth: 149 m - Intercept Depth: 97 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:97-98 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.407 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.4 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.407 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-69) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 3.47 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 97 m - To: 98 m - Hole Depth: 149 m - Intercept Depth: 97 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:97-98 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 3.47 % copper is exceptional against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 3.5 %·m is below \(grade alone is exceptional; the better of the two is used\). - Positive factor: 3.47 % copper is exceptional on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 3.47 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-70) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.16 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 97 m - To: 98 m - Hole Depth: 149 m - Intercept Depth: 97 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:97-98 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.16 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.2 %·m is below. - Negative factor: 0.16 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.16 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-71) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 97 m - To: 98 m - Hole Depth: 149 m - Intercept Depth: 97 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:97-98 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.11 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.11 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-72) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 100 - Grade Unit: g/t - Intercept: 1.2 m - True Width: 1.2 m - From: 98 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 98 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:98-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.8 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 100 g/t silver is moderate against the default band \[500, 200, 100, 30\] g/t. Grade×width 120.0 g/t·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 100 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-73) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.336 - Grade Unit: g/t - Intercept: 1.2 m - True Width: 1.2 m - From: 98 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 98 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:98-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.8 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.336 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.4 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.336 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-74) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.85 - Grade Unit: % - Intercept: 1.2 m - True Width: 1.2 m - From: 98 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 98 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:98-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.8 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 2.85 % copper is exceptional against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 3.4 %·m is below \(grade alone is exceptional; the better of the two is used\). - Positive factor: 2.85 % copper is exceptional on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.85 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-75) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.15 - Grade Unit: % - Intercept: 1.2 m - True Width: 1.2 m - From: 98 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 98 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:98-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.8 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.15 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.2 %·m is below. - Negative factor: 0.15 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.15 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-76) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.24 - Grade Unit: % - Intercept: 1.2 m - True Width: 1.2 m - From: 98 m - To: 99.2 m - Hole Depth: 149 m - Intercept Depth: 98 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:98-99.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.8 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.24 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.3 %·m is below. - Negative factor: 0.24 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.24 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-77) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.294 - Grade Unit: g/t - Intercept: 0.5 m - True Width: 0.5 m - From: 102.9 m - To: 103.4 m - Hole Depth: 149 m - Intercept Depth: 102.9 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:102.9-103.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.37 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.294 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.1 g/t·m is below. - Negative factor: 0.294 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.294 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-78) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 6 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 103.4 m - To: 104.4 m - Hole Depth: 149 m - Intercept Depth: 103.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:103.4-104.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 6 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 6.0 g/t·m is below. - Negative factor: 6 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 6 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-79) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.042 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 103.4 m - To: 104.4 m - Hole Depth: 149 m - Intercept Depth: 103.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:103.4-104.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.042 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.042 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.042 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-80) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.65 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 103.4 m - To: 104.4 m - Hole Depth: 149 m - Intercept Depth: 103.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:103.4-104.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.65 % copper is weak against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.7 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.65 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-81) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 103.4 m - To: 104.4 m - Hole Depth: 149 m - Intercept Depth: 103.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:103.4-104.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.02 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.02 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.02 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-82) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 103.4 m - To: 104.4 m - Hole Depth: 149 m - Intercept Depth: 103.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:103.4-104.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.11 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.11 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-83) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 104.4 m - To: 105.4 m - Hole Depth: 149 m - Intercept Depth: 104.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:104.4-105.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 1.0 g/t·m is below. - Negative factor: 1 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-84) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.017 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 104.4 m - To: 105.4 m - Hole Depth: 149 m - Intercept Depth: 104.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:104.4-105.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.017 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.017 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.017 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-85) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 104.4 m - To: 105.4 m - Hole Depth: 149 m - Intercept Depth: 104.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:104.4-105.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.03 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.03 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.03 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-86) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 104.4 m - To: 105.4 m - Hole Depth: 149 m - Intercept Depth: 104.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:104.4-105.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-87) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 104.4 m - To: 105.4 m - Hole Depth: 149 m - Intercept Depth: 104.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:104.4-105.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.07 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.03 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.03 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-88) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 105.4 m - To: 106.4 m - Hole Depth: 149 m - Intercept Depth: 105.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:105.4-106.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.01 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-89) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 105.4 m - To: 106.4 m - Hole Depth: 149 m - Intercept Depth: 105.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:105.4-106.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-90) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 105.4 m - To: 106.4 m - Hole Depth: 149 m - Intercept Depth: 105.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:105.4-106.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-91) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 105.4 m - To: 106.4 m - Hole Depth: 149 m - Intercept Depth: 105.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:105.4-106.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.03 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.03 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-92) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.011 - Grade Unit: g/t - Intercept: 1.1 m - True Width: 1.1 m - From: 106.4 m - To: 107.5 m - Hole Depth: 149 m - Intercept Depth: 106.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:106.4-107.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.011 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.011 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.011 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-93) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 106.4 m - To: 107.5 m - Hole Depth: 149 m - Intercept Depth: 106.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:106.4-107.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.02 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.02 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.02 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-94) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 106.4 m - To: 107.5 m - Hole Depth: 149 m - Intercept Depth: 106.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:106.4-107.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-95) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 106.4 m - To: 107.5 m - Hole Depth: 149 m - Intercept Depth: 106.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:106.4-107.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.05 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.03 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.03 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-96) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.005 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 107.5 m - To: 108.5 m - Hole Depth: 149 m - Intercept Depth: 107.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:107.5-108.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.08 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.005 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.005 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.005 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-97) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 107.5 m - To: 108.5 m - Hole Depth: 149 m - Intercept Depth: 107.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:107.5-108.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.08 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.05 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.05 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.05 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-98) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 107.5 m - To: 108.5 m - Hole Depth: 149 m - Intercept Depth: 107.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:107.5-108.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.08 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-99) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 107.5 m - To: 108.5 m - Hole Depth: 149 m - Intercept Depth: 107.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:107.5-108.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.08 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.07 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.07 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-100) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.005 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 108.5 m - To: 109.5 m - Hole Depth: 149 m - Intercept Depth: 108.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:108.5-109.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.005 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.005 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.005 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-101) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 108.5 m - To: 109.5 m - Hole Depth: 149 m - Intercept Depth: 108.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:108.5-109.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-102) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 108.5 m - To: 109.5 m - Hole Depth: 149 m - Intercept Depth: 108.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:108.5-109.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-103) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 108.5 m - To: 109.5 m - Hole Depth: 149 m - Intercept Depth: 108.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:108.5-109.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.05 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.05 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.05 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-104) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 109.5 m - To: 110.5 m - Hole Depth: 149 m - Intercept Depth: 109.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:109.5-110.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.06 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 1.0 g/t·m is below. - Negative factor: 1 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-105) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.016 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 109.5 m - To: 110.5 m - Hole Depth: 149 m - Intercept Depth: 109.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:109.5-110.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.06 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.016 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.016 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.016 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-106) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 109.5 m - To: 110.5 m - Hole Depth: 149 m - Intercept Depth: 109.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:109.5-110.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.06 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.02 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.02 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.02 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-107) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 109.5 m - To: 110.5 m - Hole Depth: 149 m - Intercept Depth: 109.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:109.5-110.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.06 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-108) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.05 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 109.5 m - To: 110.5 m - Hole Depth: 149 m - Intercept Depth: 109.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:109.5-110.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.06 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.05 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.05 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.05 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-109) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 51 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 110.5 m - To: 111.5 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:110.5-111.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 51 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 51.0 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 51 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-110) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.534 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 110.5 m - To: 111.5 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:110.5-111.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.534 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.534 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-111) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.58 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 110.5 m - To: 111.5 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:110.5-111.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.58 % copper is weak against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.6 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.58 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-112) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.39 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 110.5 m - To: 111.5 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:110.5-111.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.39 % lead is weak against the default band \[10, 6, 3, 1\] %. Grade×width 1.4 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.39 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-113) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 110.5 m - To: 111.5 m - Hole Depth: 149 m - Intercept Depth: 110.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:110.5-111.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.11 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.11 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.11 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-114) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 74 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 111.5 m - To: 112.5 m - Hole Depth: 149 m - Intercept Depth: 111.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:111.5-112.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.64 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 74 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 74.0 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 74 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-115) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.525 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 111.5 m - To: 112.5 m - Hole Depth: 149 m - Intercept Depth: 111.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:111.5-112.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.64 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.525 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.525 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-116) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.62 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 111.5 m - To: 112.5 m - Hole Depth: 149 m - Intercept Depth: 111.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:111.5-112.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.64 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.62 % copper is weak against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.6 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.62 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-117) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.94 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 111.5 m - To: 112.5 m - Hole Depth: 149 m - Intercept Depth: 111.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:111.5-112.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.64 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.94 % lead is weak against the default band \[10, 6, 3, 1\] %. Grade×width 1.9 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.94 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-118) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.37 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 111.5 m - To: 112.5 m - Hole Depth: 149 m - Intercept Depth: 111.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:111.5-112.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.64 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.37 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.4 %·m is below. - Negative factor: 0.37 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.37 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-119) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 45 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 112.5 m - To: 113.5 m - Hole Depth: 149 m - Intercept Depth: 112.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:112.5-113.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 45 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 45.0 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 45 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-120) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.547 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 112.5 m - To: 113.5 m - Hole Depth: 149 m - Intercept Depth: 112.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:112.5-113.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.547 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.547 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-121) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.17 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 112.5 m - To: 113.5 m - Hole Depth: 149 m - Intercept Depth: 112.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:112.5-113.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.17 % copper is moderate against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 1.2 %·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.17 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-122) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.74 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 112.5 m - To: 113.5 m - Hole Depth: 149 m - Intercept Depth: 112.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:112.5-113.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.74 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.7 %·m is below. - Negative factor: 0.74 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.74 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-123) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 112.5 m - To: 113.5 m - Hole Depth: 149 m - Intercept Depth: 112.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:112.5-113.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.07 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.07 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-124) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 16 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 113.5 m - To: 114.5 m - Hole Depth: 149 m - Intercept Depth: 113.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:113.5-114.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.78 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 16 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 16.0 g/t·m is below. - Negative factor: 16 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 16 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-125) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.15 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 113.5 m - To: 114.5 m - Hole Depth: 149 m - Intercept Depth: 113.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:113.5-114.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.78 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.15 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.1 g/t·m is below. - Negative factor: 0.15 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.15 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-126) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.22 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 113.5 m - To: 114.5 m - Hole Depth: 149 m - Intercept Depth: 113.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:113.5-114.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.78 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.22 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.2 %·m is below. - Negative factor: 0.22 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.22 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-127) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.29 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 113.5 m - To: 114.5 m - Hole Depth: 149 m - Intercept Depth: 113.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:113.5-114.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.78 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.29 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.3 %·m is below. - Negative factor: 0.29 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.29 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-128) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.44 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 113.5 m - To: 114.5 m - Hole Depth: 149 m - Intercept Depth: 113.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:113.5-114.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.78 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.44 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.4 %·m is below. - Negative factor: 0.44 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.44 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-129) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 117 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 114.5 m - To: 115.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:114.5-115.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.88 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 117 g/t silver is moderate against the default band \[500, 200, 100, 30\] g/t. Grade×width 117.0 g/t·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 117 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-130) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.534 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 114.5 m - To: 115.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:114.5-115.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.88 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.534 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.534 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-131) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.93 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 114.5 m - To: 115.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:114.5-115.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.88 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.93 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 1.9 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 1.93 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.93 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-132) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 4.51 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 114.5 m - To: 115.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:114.5-115.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.88 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 4.51 % lead is moderate against the default band \[10, 6, 3, 1\] %. Grade×width 4.5 %·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 4.51 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-133) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.11 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 114.5 m - To: 115.5 m - Hole Depth: 149 m - Intercept Depth: 114.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:114.5-115.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.88 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.11 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.11 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.11 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-134) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 45 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 115.5 m - To: 116.5 m - Hole Depth: 149 m - Intercept Depth: 115.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:115.5-116.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.22 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 45 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 45.0 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 45 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-135) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.71 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 115.5 m - To: 116.5 m - Hole Depth: 149 m - Intercept Depth: 115.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:115.5-116.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.22 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.71 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.7 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.71 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-136) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.99 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 115.5 m - To: 116.5 m - Hole Depth: 149 m - Intercept Depth: 115.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:115.5-116.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.22 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.99 % copper is moderate against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 1.0 %·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.99 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-137) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.9 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 115.5 m - To: 116.5 m - Hole Depth: 149 m - Intercept Depth: 115.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:115.5-116.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.22 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.9 % lead is weak against the default band \[10, 6, 3, 1\] %. Grade×width 1.9 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.90 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-138) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 115.5 m - To: 116.5 m - Hole Depth: 149 m - Intercept Depth: 115.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:115.5-116.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.22 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 2 % zinc is weak against the default band \[18, 10, 5, 2\] %. Grade×width 2.0 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-139) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.805 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 116.5 m - To: 117.5 m - Hole Depth: 149 m - Intercept Depth: 116.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:116.5-117.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 5.68 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.805 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.8 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.805 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-140) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 86 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 117.5 m - To: 118.5 m - Hole Depth: 149 m - Intercept Depth: 117.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:117.5-118.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 86 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 86.0 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 86 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-141) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.526 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 117.5 m - To: 118.5 m - Hole Depth: 149 m - Intercept Depth: 117.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:117.5-118.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.526 g/t gold is weak against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.5 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.526 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-142) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.85 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 117.5 m - To: 118.5 m - Hole Depth: 149 m - Intercept Depth: 117.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:117.5-118.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.85 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 1.9 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 1.85 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.85 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-143) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.53 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 117.5 m - To: 118.5 m - Hole Depth: 149 m - Intercept Depth: 117.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:117.5-118.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 2.53 % lead is weak against the default band \[10, 6, 3, 1\] %. Grade×width 2.5 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.53 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-144) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.9 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 117.5 m - To: 118.5 m - Hole Depth: 149 m - Intercept Depth: 117.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:117.5-118.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 2.9 % zinc is weak against the default band \[18, 10, 5, 2\] %. Grade×width 2.9 %·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.90 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-145) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 28 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 118.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 118.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:118.5-119.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.9 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 28 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 28.0 g/t·m is below. - Negative factor: 28 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 28 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-146) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.285 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 118.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 118.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:118.5-119.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.9 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.285 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.3 g/t·m is below. - Negative factor: 0.285 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.285 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-147) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.65 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 118.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 118.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:118.5-119.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.9 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.65 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 1.6 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 1.65 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.65 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-148) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.44 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 118.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 118.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:118.5-119.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.9 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.44 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.4 %·m is below. - Negative factor: 0.44 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.44 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-149) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.68 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 118.5 m - To: 119.5 m - Hole Depth: 149 m - Intercept Depth: 118.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:118.5-119.5 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.9 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.68 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 1.7 %·m is below. - Negative factor: 1.68 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.68 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-150) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 4 - Grade Unit: g/t - Intercept: 0.8 m - True Width: 0.8 m - From: 119.5 m - To: 120.3 m - Hole Depth: 149 m - Intercept Depth: 119.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:119.5-120.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 4 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 3.2 g/t·m is below. - Negative factor: 4 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 4 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-151) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.099 - Grade Unit: g/t - Intercept: 0.8 m - True Width: 0.8 m - From: 119.5 m - To: 120.3 m - Hole Depth: 149 m - Intercept Depth: 119.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:119.5-120.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.099 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.1 g/t·m is below. - Negative factor: 0.099 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.099 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-152) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 1.32 - Grade Unit: % - Intercept: 0.8 m - True Width: 0.8 m - From: 119.5 m - To: 120.3 m - Hole Depth: 149 m - Intercept Depth: 119.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:119.5-120.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 1.32 % copper is moderate against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 1.1 %·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.32 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-153) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.04 - Grade Unit: % - Intercept: 0.8 m - True Width: 0.8 m - From: 119.5 m - To: 120.3 m - Hole Depth: 149 m - Intercept Depth: 119.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:119.5-120.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.04 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.04 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.04 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-154) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.15 - Grade Unit: % - Intercept: 0.8 m - True Width: 0.8 m - From: 119.5 m - To: 120.3 m - Hole Depth: 149 m - Intercept Depth: 119.5 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:119.5-120.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.53 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.15 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.15 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.15 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.8 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-155) Wedge Critical Minerals · silver #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: silver - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 3 - Grade Unit: g/t - Intercept: 0.9 m - True Width: 0.9 m - From: 120.3 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 120.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:120.3-121.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 3 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 2.7 g/t·m is below. - Negative factor: 3 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 3 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-156) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.057 - Grade Unit: g/t - Intercept: 0.9 m - True Width: 0.9 m - From: 120.3 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 120.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:120.3-121.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.057 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.1 g/t·m is below. - Negative factor: 0.057 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.057 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-157) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 2.05 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.9 m - From: 120.3 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 120.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:120.3-121.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 2.05 % copper is strong against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 1.8 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 2.05 % copper is strong on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.05 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-158) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.9 m - From: 120.3 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 120.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:120.3-121.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.07 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.07 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.07 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-159) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.96 - Grade Unit: % - Intercept: 0.9 m - True Width: 0.9 m - From: 120.3 m - To: 121.2 m - Hole Depth: 149 m - Intercept Depth: 120.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:120.3-121.2 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.43 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.96 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.9 %·m is below. - Negative factor: 0.96 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.96 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 0.9 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-160) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.009 - Grade Unit: g/t - Intercept: 1.1 m - True Width: 1.1 m - From: 121.2 m - To: 122.3 m - Hole Depth: 149 m - Intercept Depth: 121.2 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:121.2-122.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.009 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.009 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.009 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-161) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 121.2 m - To: 122.3 m - Hole Depth: 149 m - Intercept Depth: 121.2 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:121.2-122.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-162) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.01 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 121.2 m - To: 122.3 m - Hole Depth: 149 m - Intercept Depth: 121.2 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:121.2-122.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.01 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.01 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.01 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-163) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 121.2 m - To: 122.3 m - Hole Depth: 149 m - Intercept Depth: 121.2 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:121.2-122.3 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.04 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.03 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.03 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-164) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.009 - Grade Unit: g/t - Intercept: 1.1 m - True Width: 1.1 m - From: 122.3 m - To: 123.4 m - Hole Depth: 149 m - Intercept Depth: 122.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:122.3-123.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.009 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.009 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.009 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-165) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 122.3 m - To: 123.4 m - Hole Depth: 149 m - Intercept Depth: 122.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:122.3-123.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-166) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 122.3 m - To: 123.4 m - Hole Depth: 149 m - Intercept Depth: 122.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:122.3-123.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-167) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.03 - Grade Unit: % - Intercept: 1.1 m - True Width: 1.1 m - From: 122.3 m - To: 123.4 m - Hole Depth: 149 m - Intercept Depth: 122.3 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:122.3-123.4 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.03 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.03 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.03 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-168) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1.2 m - True Width: 1.2 m - From: 123.4 m - To: 124.6 m - Hole Depth: 149 m - Intercept Depth: 123.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:123.4-124.6 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.02 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-169) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1.2 m - True Width: 1.2 m - From: 123.4 m - To: 124.6 m - Hole Depth: 149 m - Intercept Depth: 123.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:123.4-124.6 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.02 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-170) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.02 - Grade Unit: % - Intercept: 1.2 m - True Width: 1.2 m - From: 123.4 m - To: 124.6 m - Hole Depth: 149 m - Intercept Depth: 123.4 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:123.4-124.6 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.02 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.0 %·m is below. - Negative factor: 0.02 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.02 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.2 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-171) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.081 - Grade Unit: g/t - Intercept: 1 m - True Width: 1 m - From: 124.6 m - To: 125.6 m - Hole Depth: 149 m - Intercept Depth: 124.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:124.6-125.6 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.18 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.081 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.1 g/t·m is below. - Negative factor: 0.081 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.081 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-172) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 124.6 m - To: 125.6 m - Hole Depth: 149 m - Intercept Depth: 124.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:124.6-125.6 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.18 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.07 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.07 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.07 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-173) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 124.6 m - To: 125.6 m - Hole Depth: 149 m - Intercept Depth: 124.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:124.6-125.6 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.18 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-174) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.07 - Grade Unit: % - Intercept: 1 m - True Width: 1 m - From: 124.6 m - To: 125.6 m - Hole Depth: 149 m - Intercept Depth: 124.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:124.6-125.6 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.18 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.1 %·m is below. - Negative factor: 0.07 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.07 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-175) Wedge Critical Minerals · gold #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: gold - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.009 - Grade Unit: g/t - Intercept: 1.5 m - True Width: 1.5 m - From: 125.6 m - To: 127.1 m - Hole Depth: 149 m - Intercept Depth: 125.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:125.6-127.1 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.32 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.009 g/t gold is below against the default band \[5, 2, 1, 0.3\] g/t. Grade×width 0.0 g/t·m is below. - Negative factor: 0.009 g/t gold is below the weak threshold \(0.3 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.009 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-176) Wedge Critical Minerals · copper #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: copper - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.27 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 125.6 m - To: 127.1 m - Hole Depth: 149 m - Intercept Depth: 125.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:125.6-127.1 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.32 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.27 % copper is below against the vms deposit band \[2.5, 1.5, 0.8, 0.4\] %. Grade×width 0.4 %·m is below. - Negative factor: 0.27 % copper is below the weak threshold \(0.4 %\) on the vms deposit band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.27 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-177) Wedge Critical Minerals · lead #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: lead - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 125.6 m - To: 127.1 m - Hole Depth: 149 m - Intercept Depth: 125.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:125.6-127.1 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.32 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0 % lead is below against the default band \[10, 6, 3, 1\] %. Grade×width 0.0 %·m is below. - Negative factor: 0 % lead is below the weak threshold \(1 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.00 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-178) Wedge Critical Minerals · zinc #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Commodity: zinc - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Grade: 0.15 - Grade Unit: % - Intercept: 1.5 m - True Width: 1.5 m - From: 125.6 m - To: 127.1 m - Hole Depth: 149 m - Intercept Depth: 125.6 m #### Classification - Deposit Type: vms - Sample Type: drill - Group ID: WD-26-11:125.6-127.1 - Mining Method: unknown #### Location - Location: Upper Zone Above Void - Azimuth: 355 ° - Dip: -50 ° - Loc. Source: document #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.32 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: Expanded from assay table. 0.15 % zinc is below against the default band \[18, 10, 5, 2\] %. Grade×width 0.2 %·m is below. - Negative factor: 0.15 % zinc is below the weak threshold \(2 %\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.15 Context: TABLE 2: DDH WD-26-11 CERTIFIED ASSAYS - #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 1.5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-179) Wedge Critical Minerals #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Intercept: 10.7 m - True Width: 10.7 m - Hole Depth: 149 m #### Classification - Deposit Type: vms - Sample Type: drill #### Location - Azimuth: 355 ° - Dip: -50 ° #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.08 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This silver grade is part of a high-grade polymetallic VMS intercept, contributing to the overall value of the zone. The disclosure of true width adds confidence. - Positive factor: High silver grade for the interval - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · text > 3.08% CU-EQ Over 10.70M #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 10.7 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-180) Wedge Critical Minerals #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Intercept: 9.3 m - True Width: 9.3 m - Hole Depth: 149 m #### Classification - Deposit Type: vms - Sample Type: drill #### Location - Azimuth: 355 ° - Dip: -50 ° #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.27 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This silver grade is part of a high-grade polymetallic VMS intercept, contributing to the overall value of the zone. The disclosure of true width adds confidence. - Positive factor: High silver grade for the interval - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · text > 3.27% CU-EQ Over 9.30M #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 9.3 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### WD-26-11 [Link to this fact](https://atlas-extractions.minestarters.com/news/nine-mile-metals-ddh-wd-26-11-intersects-2-high-grade-vms-zones-over-27-6m-inclu--ed55a704-507d-4975-8329-0bf71c0c2d7b#fact-drill-facts-181) Wedge Critical Minerals #### Identity - Hole ID: WD-26-11 - Project: Wedge Critical Minerals - Region: canada\_nb - Reported Region: canada\_nb - Ticker: NINE #### Geometry - Intercept: 5 m - True Width: 5 m - Hole Depth: 149 m #### Classification - Deposit Type: vms - Sample Type: drill #### Location - Azimuth: 355 ° - Dip: -50 ° #### QA/QC - Laboratory: ALS Global - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 4.3 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-09-21T00:00:00.000Z Reasoning: This silver grade is part of a high-grade polymetallic VMS intercept, contributing to the overall value of the zone. The disclosure of true width adds confidence. - Positive factor: High silver grade for the interval - Positive factor: True width disclosed - Positive factor: Part of a significant polymetallic intercept Evidence · text > 4.30% CU-EQ Over 5.0M #### Tags used in scoring **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: true\_width\_m is 5 **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.