Northisle Announces Infill Drill Results at Northwest Expo Extend Strike and Add New High-Grade Intervals
Original announcement by tmx on
- Company
- Northisle Copper and Gold Inc.
- Ticker
- NCX
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Gold
- Secondary commodities
- Copper, Molybdenum, Rhenium
- Document categories
- Drill results
- Extracted
- 2026-09-12 15:05:23 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Northisle announced infill drill results from its Northwest Expo deposit, highlighting several high-grade gold-equivalent intercepts, including 117.0 metres at 1.50 g/t Au Eq. in hole NW25-57. The drilling successfully extended the strike length of mineralization to approximately 1.1km and confirmed consistent mineralization within the resource pit shell. These results are intended to support the upgrade of Inferred resources to the Indicated category for the ongoing Pre-Feasibility Study.
Reasoning: The infill drill results confirm and extend high-grade gold-copper-molybdenum-rhenium mineralization at Northwest Expo, with several intercepts showing exceptional gold equivalent grades, supporting resource upgrade and PFS. While true widths are not provided, the overall continuity and grade profile are positive.
Positive factors
- Exceptional gold equivalent grades in several intercepts
- Extension of strike length of mineralization to 1.1km
- Confirmation of consistent mineralization and continuity within the pit shell
- Infill drilling supports resource upgrade for Pre-Feasibility Study
Negative factors
- True widths not provided for intercepts
- Lower grades in the deep sector compared to other areas
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 76
Extracted facts
Stored fact records: 76. Some facts used in scoring do not have a stored record.
Drill Results (76)
NW25-42Northwest Expo · goldGrade: 0.2Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 99 m
- To
- 119 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:99-119
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.20”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · copperGrade: 0.04Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 20 m
- From
- 99 m
- To
- 119 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:99-119
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.04”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · molybdenumGrade: 53.43Grade Unit: ppmIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 53.43
- Grade Unit
- ppm
- Intercept
- 20 m
- From
- 99 m
- To
- 119 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:99-119
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“53.43”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · rheniumGrade: 0.2Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 99 m
- To
- 119 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:99-119
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.20”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · goldGrade: 0.28Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 99 m
- To
- 119 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:99-119
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.28”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · copperGrade: 0.26Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 20 m
- From
- 99 m
- To
- 119 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:99-119
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent copper intercept, contributing to resource confidence.
Positive factors
- Moderate copper grade (0.26 %) and moderate grade-thickness (5.2 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.26”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · goldGrade: 0.18Grade Unit: g/tIntercept: 41.6 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 41.6 m
- From
- 120.8 m
- To
- 162.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:120.8-162.3
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.18”
Context: 41.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · copperGrade: 0.05Grade Unit: %Intercept: 41.6 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 41.6 m
- From
- 120.8 m
- To
- 162.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:120.8-162.3
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.05”
Context: 41.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · molybdenumGrade: 73.67Grade Unit: ppmIntercept: 41.6 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 73.67
- Grade Unit
- ppm
- Intercept
- 41.6 m
- From
- 120.8 m
- To
- 162.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:120.8-162.3
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“73.67”
Context: 41.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · rheniumGrade: 0.36Grade Unit: g/tIntercept: 41.6 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 41.6 m
- From
- 120.8 m
- To
- 162.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:120.8-162.3
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.36”
Context: 41.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · goldGrade: 0.28Grade Unit: g/tIntercept: 41.6 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 41.6 m
- From
- 120.8 m
- To
- 162.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:120.8-162.3
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.28”
Context: 41.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-42Northwest Expo · copperGrade: 0.26Grade Unit: %Intercept: 41.6 mView all detailsHide details
Identity
- Hole ID
- NW25-42
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 41.6 m
- From
- 120.8 m
- To
- 162.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 99 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-42:120.8-162.3
- Mining Method
- open_pit
Location
- Easting
- 569703
- Northing
- 5619054
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 58 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.26
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent copper intercept, contributing to resource confidence.
Positive factors
- Moderate copper grade (0.26 %) and moderate grade-thickness (10.8 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.26”
Context: 41.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.21Grade Unit: g/tIntercept: 66.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 66.3 m
- From
- 82.5 m
- To
- 148.8 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:82.5-148.8
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.21”
Context: 66.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.06Grade Unit: %Intercept: 66.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 66.3 m
- From
- 82.5 m
- To
- 148.8 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:82.5-148.8
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.06”
Context: 66.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · molybdenumGrade: 89.68Grade Unit: ppmIntercept: 66.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 89.68
- Grade Unit
- ppm
- Intercept
- 66.3 m
- From
- 82.5 m
- To
- 148.8 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:82.5-148.8
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“89.68”
Context: 66.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · rheniumGrade: 0.26Grade Unit: g/tIntercept: 66.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 66.3 m
- From
- 82.5 m
- To
- 148.8 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:82.5-148.8
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.26”
Context: 66.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.34Grade Unit: g/tIntercept: 66.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 66.3 m
- From
- 82.5 m
- To
- 148.8 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:82.5-148.8
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.34 g/t) and moderate grade-thickness (22.5 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.34”
Context: 66.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.32Grade Unit: %Intercept: 66.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 66.3 m
- From
- 82.5 m
- To
- 148.8 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:82.5-148.8
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.32
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent copper intercept, contributing to resource confidence.
Positive factors
- Moderate copper grade (0.32 %) and moderate grade-thickness (21.2 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.32”
Context: 66.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.18Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 164.6 m
- To
- 179 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:164.6-179
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.18”
Context: 14.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.04Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 164.6 m
- To
- 179 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:164.6-179
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.04”
Context: 14.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · molybdenumGrade: 56.18Grade Unit: ppmIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 56.18
- Grade Unit
- ppm
- Intercept
- 14.4 m
- From
- 164.6 m
- To
- 179 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:164.6-179
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“56.18”
Context: 14.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · rheniumGrade: 0.1Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 164.6 m
- To
- 179 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:164.6-179
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.10”
Context: 14.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.25Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 164.6 m
- To
- 179 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:164.6-179
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.25”
Context: 14.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.23Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 164.6 m
- To
- 179 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:164.6-179
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.23”
Context: 14.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.51Grade Unit: g/tIntercept: 22.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 22.3 m
- From
- 193.3 m
- To
- 215.6 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:193.3-215.6
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good gold intercept, confirming continuity of mineralization.
Positive factors
- Strong gold grade (0.51 g/t) and good grade-thickness (11.4 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.51”
Context: 22.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.07Grade Unit: %Intercept: 22.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 22.3 m
- From
- 193.3 m
- To
- 215.6 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:193.3-215.6
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.07”
Context: 22.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · molybdenumGrade: 4.16Grade Unit: ppmIntercept: 22.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 4.16
- Grade Unit
- ppm
- Intercept
- 22.3 m
- From
- 193.3 m
- To
- 215.6 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:193.3-215.6
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“4.16”
Context: 22.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · rheniumGrade: 0.01Grade Unit: g/tIntercept: 22.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 22.3 m
- From
- 193.3 m
- To
- 215.6 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:193.3-215.6
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.01”
Context: 22.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.59Grade Unit: g/tIntercept: 22.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 22.3 m
- From
- 193.3 m
- To
- 215.6 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:193.3-215.6
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.59
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good gold intercept, confirming continuity of mineralization.
Positive factors
- Strong gold grade (0.59 g/t) and good grade-thickness (13.2 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.59”
Context: 22.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.54Grade Unit: %Intercept: 22.3 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 22.3 m
- From
- 193.3 m
- To
- 215.6 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:193.3-215.6
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.54
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good copper intercept, confirming continuity of mineralization.
Positive factors
- Strong copper grade (0.54 %) and moderate grade-thickness (12.0 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.54”
Context: 22.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.26Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 259 m
- To
- 282 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:259-282
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.26”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.04Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 23 m
- From
- 259 m
- To
- 282 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:259-282
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.04”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · molybdenumGrade: 47.26Grade Unit: ppmIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 47.26
- Grade Unit
- ppm
- Intercept
- 23 m
- From
- 259 m
- To
- 282 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:259-282
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“47.26”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · rheniumGrade: 0.11Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 259 m
- To
- 282 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:259-282
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.11”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · goldGrade: 0.33Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 259 m
- To
- 282 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:259-282
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.33 g/t) and moderate grade-thickness (7.6 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.33”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-43Northwest Expo · copperGrade: 0.31Grade Unit: %Intercept: 23 mView all detailsHide details
Identity
- Hole ID
- NW25-43
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 23 m
- From
- 259 m
- To
- 282 m
- Hole Depth
- 283 m
- Intercept Depth
- 82.5 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-43:259-282
- Mining Method
- open_pit
Location
- Easting
- 569702
- Northing
- 5619055
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 223 m
- Azimuth
- 21 °
- Dip
- -51.7 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent copper intercept, contributing to resource confidence.
Positive factors
- Moderate copper grade (0.31 %) and moderate grade-thickness (7.1 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.31”
Context: 23.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · goldGrade: 0.21Grade Unit: g/tIntercept: 10.9 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 10.9 m
- From
- 414 m
- To
- 424.9 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:414-424.9
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.21”
Context: 10.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · copperGrade: 0.04Grade Unit: %Intercept: 10.9 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 10.9 m
- From
- 414 m
- To
- 424.9 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:414-424.9
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.04”
Context: 10.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · molybdenumGrade: 74.19Grade Unit: ppmIntercept: 10.9 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 74.19
- Grade Unit
- ppm
- Intercept
- 10.9 m
- From
- 414 m
- To
- 424.9 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:414-424.9
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“74.19”
Context: 10.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · rheniumGrade: 0.59Grade Unit: g/tIntercept: 10.9 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.59
- Grade Unit
- g/t
- Intercept
- 10.9 m
- From
- 414 m
- To
- 424.9 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:414-424.9
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.59”
Context: 10.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · goldGrade: 0.31Grade Unit: g/tIntercept: 10.9 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 10.9 m
- From
- 414 m
- To
- 424.9 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:414-424.9
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.31 g/t) and moderate grade-thickness (3.4 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.31”
Context: 10.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · copperGrade: 0.29Grade Unit: %Intercept: 10.9 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 10.9 m
- From
- 414 m
- To
- 424.9 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:414-424.9
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.29
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent copper intercept, contributing to resource confidence.
Positive factors
- Moderate copper grade (0.29 %) and moderate grade-thickness (3.2 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.29”
Context: 10.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · goldGrade: 0.28Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 16.1 m
- From
- 445.9 m
- To
- 462 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:445.9-462
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.28”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · copperGrade: 0.08Grade Unit: %Intercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 16.1 m
- From
- 445.9 m
- To
- 462 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:445.9-462
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.08”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · molybdenumGrade: 193.66Grade Unit: ppmIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 193.66
- Grade Unit
- ppm
- Intercept
- 16.1 m
- From
- 445.9 m
- To
- 462 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:445.9-462
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“193.66”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · rheniumGrade: 0.81Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 16.1 m
- From
- 445.9 m
- To
- 462 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:445.9-462
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.81”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · goldGrade: 0.49Grade Unit: g/tIntercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 16.1 m
- From
- 445.9 m
- To
- 462 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:445.9-462
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.49
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.49 g/t) and moderate grade-thickness (7.9 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.49”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-44Northwest Expo · copperGrade: 0.46Grade Unit: %Intercept: 16.1 mView all detailsHide details
Identity
- Hole ID
- NW25-44
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.46
- Grade Unit
- %
- Intercept
- 16.1 m
- From
- 445.9 m
- To
- 462 m
- Hole Depth
- 465 m
- Intercept Depth
- 414 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-44:445.9-462
- Mining Method
- open_pit
Location
- Easting
- 569587
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 138 °
- Dip
- -53.2 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.46
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good copper intercept, confirming continuity of mineralization.
Positive factors
- Strong copper grade (0.46 %) and good grade-thickness (7.4 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.46”
Context: 16.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · goldGrade: 0.19Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 38 m
- To
- 44 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:38-44
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.19”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · copperGrade: 0Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 6 m
- From
- 38 m
- To
- 44 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:38-44
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.00”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · molybdenumGrade: 194.01Grade Unit: ppmIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 194.01
- Grade Unit
- ppm
- Intercept
- 6 m
- From
- 38 m
- To
- 44 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:38-44
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“194.01”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · rheniumGrade: 0.05Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 38 m
- To
- 44 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:38-44
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.05”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · goldGrade: 0.31Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 38 m
- To
- 44 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:38-44
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.31 g/t) and moderate grade-thickness (1.9 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.31”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · copperGrade: 0.28Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 6 m
- From
- 38 m
- To
- 44 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:38-44
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.28
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent copper intercept, contributing to resource confidence.
Positive factors
- Moderate copper grade (0.28 %) and moderate grade-thickness (1.7 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.28”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · goldGrade: 0.27Grade Unit: g/tIntercept: 99 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 99 m
- From
- 56 m
- To
- 155 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:56-155
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.27”
Context: 99.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · copperGrade: 0.05Grade Unit: %Intercept: 99 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 99 m
- From
- 56 m
- To
- 155 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:56-155
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.05”
Context: 99.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · molybdenumGrade: 156.41Grade Unit: ppmIntercept: 99 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 156.41
- Grade Unit
- ppm
- Intercept
- 99 m
- From
- 56 m
- To
- 155 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:56-155
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“156.41”
Context: 99.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · rheniumGrade: 0.63Grade Unit: g/tIntercept: 99 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.63
- Grade Unit
- g/t
- Intercept
- 99 m
- From
- 56 m
- To
- 155 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:56-155
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.63”
Context: 99.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · goldGrade: 0.43Grade Unit: g/tIntercept: 99 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 99 m
- From
- 56 m
- To
- 155 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:56-155
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.43 g/t) and strong grade-thickness (42.6 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.43”
Context: 99.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-45Northwest Expo · copperGrade: 0.4Grade Unit: %Intercept: 99 mView all detailsHide details
Identity
- Hole ID
- NW25-45
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 99 m
- From
- 56 m
- To
- 155 m
- Hole Depth
- 474 m
- Intercept Depth
- 38 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-45:56-155
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 165 °
- Dip
- -47.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.4
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good copper intercept, confirming continuity of mineralization.
Positive factors
- Strong copper grade (0.4 %) and strong grade-thickness (39.6 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.40”
Context: 99.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · goldGrade: 0.43Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 291 m
- To
- 330 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:291-330
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.43 g/t) and moderate grade-thickness (16.8 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.43”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · copperGrade: 0.03Grade Unit: %Intercept: 39 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 39 m
- From
- 291 m
- To
- 330 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:291-330
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.03”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · molybdenumGrade: 104.54Grade Unit: ppmIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 104.54
- Grade Unit
- ppm
- Intercept
- 39 m
- From
- 291 m
- To
- 330 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:291-330
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“104.54”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · rheniumGrade: 0.36Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 291 m
- To
- 330 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:291-330
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.36”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · goldGrade: 0.53Grade Unit: g/tIntercept: 39 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 39 m
- From
- 291 m
- To
- 330 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:291-330
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good gold intercept, confirming continuity of mineralization.
Positive factors
- Strong gold grade (0.53 g/t) and good grade-thickness (20.7 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.53”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · copperGrade: 0.5Grade Unit: %Intercept: 39 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 39 m
- From
- 291 m
- To
- 330 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:291-330
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.5
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good copper intercept, confirming continuity of mineralization.
Positive factors
- Strong copper grade (0.5 %) and strong grade-thickness (19.5 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.50”
Context: 39.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · goldGrade: 0.41Grade Unit: g/tIntercept: 102 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 102 m
- From
- 348 m
- To
- 450 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:348-450
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Consistent gold intercept, contributing to resource confidence.
Positive factors
- Moderate gold grade (0.41 g/t) and strong grade-thickness (41.8 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.41”
Context: 102.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · copperGrade: 0.08Grade Unit: %Intercept: 102 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 102 m
- From
- 348 m
- To
- 450 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:348-450
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.08”
Context: 102.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · molybdenumGrade: 78.79Grade Unit: ppmIntercept: 102 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 78.79
- Grade Unit
- ppm
- Intercept
- 102 m
- From
- 348 m
- To
- 450 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:348-450
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“78.79”
Context: 102.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · rheniumGrade: 0.17Grade Unit: g/tIntercept: 102 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 102 m
- From
- 348 m
- To
- 450 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:348-450
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.17”
Context: 102.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · goldGrade: 0.55Grade Unit: g/tIntercept: 102 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.55
- Grade Unit
- g/t
- Intercept
- 102 m
- From
- 348 m
- To
- 450 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:348-450
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good gold intercept, confirming continuity of mineralization.
Positive factors
- Strong gold grade (0.55 g/t) and strong grade-thickness (56.1 g/t·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.55”
Context: 102.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-46Northwest Expo · copperGrade: 0.51Grade Unit: %Intercept: 102 mView all detailsHide details
Identity
- Hole ID
- NW25-46
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 102 m
- From
- 348 m
- To
- 450 m
- Hole Depth
- 453 m
- Intercept Depth
- 291 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-46:348-450
- Mining Method
- open_pit
Location
- Easting
- 569586
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 186 °
- Dip
- -69.4 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 0.51
- Metal Eq. Unit
- % CuEq
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Good copper intercept, confirming continuity of mineralization.
Positive factors
- Strong copper grade (0.51 %) and strong grade-thickness (52.0 %·m)
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.51”
Context: 102.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-47Northwest Expo · goldGrade: 0.12Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- NW25-47
- Project
- Northwest Expo
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 260 m
- To
- 281 m
- Hole Depth
- 480 m
- Intercept Depth
- 260 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-47:260-281
- Mining Method
- open_pit
Location
- Easting
- 569585
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 155 °
- Dip
- -45.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t Au
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade gold intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.12”
Context: 21.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-47Northwest Expo · copperGrade: 0.03Grade Unit: %Intercept: 21 mView all detailsHide details
Identity
- Hole ID
- NW25-47
- Project
- Northwest Expo
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 21 m
- From
- 260 m
- To
- 281 m
- Hole Depth
- 480 m
- Intercept Depth
- 260 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-47:260-281
- Mining Method
- open_pit
Location
- Easting
- 569585
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 155 °
- Dip
- -45.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- % Cu
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Lower-grade copper intercept, consistent with broader mineralization.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“0.03”
Context: 21.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-47Northwest Expo · molybdenumGrade: 172.64Grade Unit: ppmIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- NW25-47
- Project
- Northwest Expo
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 172.64
- Grade Unit
- ppm
- Intercept
- 21 m
- From
- 260 m
- To
- 281 m
- Hole Depth
- 480 m
- Intercept Depth
- 260 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-47:260-281
- Mining Method
- open_pit
Location
- Easting
- 569585
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 155 °
- Dip
- -45.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace molybdenum intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“172.64”
Context: 21.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
NW25-47Northwest Expo · rheniumGrade: 1.32Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- NW25-47
- Project
- Northwest Expo
- Commodity
- rhenium
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- NCX
Geometry
- Grade
- 1.32
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 260 m
- To
- 281 m
- Hole Depth
- 480 m
- Intercept Depth
- 260 m
Classification
- Deposit Type
- porphyry
- Program
- resource
- Sample Type
- drill
- Group ID
- NW25-47:260-281
- Mining Method
- open_pit
Location
- Easting
- 569585
- Northing
- 5619451
- CRS
- NAD83 CRS, UTM Zone 9 North
- Elevation
- 405 m
- Azimuth
- 155 °
- Dip
- -45.1 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Compositing
- Cutoff Grade
- 0.1
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-03-31T00:00:00.000Z
Reasoning: Trace rhenium intercept, contributing to overall metal endowment.
Positive factors
- Intercept confirms mineralization continuity.
- Infill drilling supports resource upgrade
Negative factors
- True width not disclosed
Evidence · table
“1.32”
Context: 21.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.