Omai Gold Intersects 3.86 g/t Au over 23.8m and 3.49 g/t Au over 16.9m at Wenot and Plans Drill Hole to Test Depth Potential of Gilt Deposit
Original announcement by tmx on
- Company
- Omai Gold Mines Corp.
- Ticker
- OMG
- Exchange
- TSX
- Region
- Guyana, South America
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Resource update, Other
- Extracted
- 2026-09-18 14:57:18 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Omai Gold Mines Corp. announced high-grade gold drill results from its Wenot deposit, including 3.86 g/t Au over 23.8m and 3.49 g/t Au over 16.9m. The company also reported an updated Mineral Resource Estimate for its Omai Gold Project, showing a significant increase in both Indicated and Inferred resources for the Wenot deposit, and a substantial increase in Inferred resources for the Gilt deposit. An updated Preliminary Economic Assessment is planned for Q3 2026, and deep drilling is scheduled to test the depth potential of the Gilt deposit.
Reasoning: Omai Gold reported strong high-grade gold drill intercepts from its Wenot deposit, including 3.86 g/t Au over 23.8m and 3.49 g/t Au over 16.9m. The company also announced an updated NI 43-101 compliant Mineral Resource Estimate showing a 49.8% increase in Indicated resources and a 7.6% increase in Inferred resources for Wenot, alongside a 120% increase in Gilt's Inferred resources. A PEA is planned for Q3 2026, and deep drilling is planned for the Gilt deposit, indicating strong project advancement and exploration success.
Positive factors
- High-grade gold intercepts reported from Wenot deposit
- Significant increase in Indicated and Inferred Mineral Resources for Wenot
- Substantial increase in Inferred Mineral Resources for Gilt
- Ongoing 50,000m drill program targeting resource conversion and expansion
- Planned Preliminary Economic Assessment (PEA) for Q3 2026
- Planned deep drilling to test depth potential of Gilt deposit
Negative factors
- Qualified Person is not independent
- True width for drill intercepts is estimated, not precisely stated for each interval
- Indicated Mineral Resource for Gilt deposit decreased
Facts used in scoring: 58
Extracted facts
Stored fact records: 58. Some facts used in scoring do not have a stored record.
Drill Results (58)
26ODD-168Omai · goldGrade: 3.3Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 226.4 m
- To
- 228.4 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 226.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:226.4-228.4
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“3.30”
Context: 2.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 0.53Grade Unit: g/tIntercept: 9.9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 9.9 m
- From
- 317.1 m
- To
- 327 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 317.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:317.1-327
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade over a moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.53”
Context: 9.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 1.77Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.77
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 346.9 m
- To
- 349.2 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 346.9 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:346.9-349.2
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.77”
Context: 2.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 1.79Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 359 m
- To
- 366.1 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 359 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:359-366.1
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.79”
Context: 7.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 2.23Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.23
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 375 m
- To
- 379 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 375 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:375-379
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.23”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 4.88Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 4.88
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 428.6 m
- To
- 435 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 428.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:428.6-435
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a moderate width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“4.88”
Context: 6.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 22.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 22.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 432 m
- To
- 433 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 432 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:432-433
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with bonanza grade gold over a narrow width, indicating a high-grade zone.
Positive factors
- New drill intercept
- Bonanza grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“22.80”
Context: 1.0
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 22.80 g/t Au is exceptionally high-grade, well above the deposit-type norm for orogenic gold.
Evidence · table
“22.80”
Context: 1.0
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 0.69Grade Unit: g/tIntercept: 9.9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 9.9 m
- From
- 518.4 m
- To
- 528.3 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 518.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:518.4-528.3
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade over a moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.69”
Context: 9.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 1.47Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.47
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 605 m
- To
- 610 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 605 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:605-610
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.47”
Context: 5.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 0.86Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 616 m
- To
- 617.2 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 616 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:616-617.2
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.86”
Context: 1.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 0.85Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.85
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 622 m
- To
- 623.5 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 622 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:622-623.5
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.85”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-168Omai · goldGrade: 0.52Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-168
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.52
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 631 m
- To
- 640 m
- Hole Depth
- 643.8 m
- Intercept Depth
- 631 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-168:631-640
Location
- Location
- Wenot
- Easting
- 305780
- Northing
- 601777
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade over a moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.52”
Context: 9.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 0.74Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 90 m
- To
- 91.5 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:90-91.5
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.74”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 1.87Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.87
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 319.5 m
- To
- 322.9 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 319.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:319.5-322.9
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.87”
Context: 3.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 1.29Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.29
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 344.5 m
- To
- 350.5 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 344.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:344.5-350.5
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.29”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 2.9Grade Unit: g/tIntercept: 22.9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 22.9 m
- From
- 371.6 m
- To
- 394.5 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 371.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:371.6-394.5
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade gold over a strong width, indicating significant mineralization.
Positive factors
- New drill intercept
- Strong grade gold
- Strong width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.90”
Context: 22.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 9.13Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 9.13
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 389.1 m
- To
- 393.2 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 389.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:389.1-393.2
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with bonanza grade gold over a narrow width, indicating a high-grade zone.
Positive factors
- New drill intercept
- Bonanza grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“9.13”
Context: 4.1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 9.13 g/t Au is exceptionally high-grade, well above the deposit-type norm for orogenic gold.
Evidence · table
“9.13”
Context: 4.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 1.29Grade Unit: g/tIntercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.29
- Grade Unit
- g/t
- Intercept
- 8.6 m
- From
- 427.4 m
- To
- 436 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 427.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:427.4-436
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.29”
Context: 8.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 1.38Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 475.2 m
- To
- 476.4 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 475.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:475.2-476.4
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.38”
Context: 1.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 2.64Grade Unit: g/tIntercept: 19.2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.64
- Grade Unit
- g/t
- Intercept
- 19.2 m
- From
- 497.3 m
- To
- 516.5 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 497.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:497.3-516.5
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade gold over a strong width, indicating significant mineralization.
Positive factors
- New drill intercept
- Strong grade gold
- Strong width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.64”
Context: 19.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 4.9Grade Unit: g/tIntercept: 8.9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 4.9
- Grade Unit
- g/t
- Intercept
- 8.9 m
- From
- 506.1 m
- To
- 515 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 506.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:506.1-515
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a moderate width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“4.90”
Context: 8.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-169Omai · goldGrade: 0.74Grade Unit: g/tIntercept: 3.6 mView all detailsHide details
Identity
- Hole ID
- 26ODD-169
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 3.6 m
- From
- 522.2 m
- To
- 525.8 m
- Hole Depth
- 579.1 m
- Intercept Depth
- 522.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-169:522.2-525.8
Location
- Location
- Wenot
- Easting
- 304930
- Northing
- 601914
- Azimuth
- 174 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.74”
Context: 3.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 0.32Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 220.2 m
- To
- 223.6 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 220.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:220.2-223.6
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.32”
Context: 3.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 1.04Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.04
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 317 m
- To
- 321.5 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 317 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:317-321.5
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.04”
Context: 4.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 0.53Grade Unit: g/tIntercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 4.2 m
- From
- 349.8 m
- To
- 354 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 349.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:349.8-354
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.53”
Context: 4.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 1.33Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.33
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 369.4 m
- To
- 376.5 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 369.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:369.4-376.5
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.33”
Context: 7.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 0.29Grade Unit: g/tIntercept: 9.9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 9.9 m
- From
- 409.1 m
- To
- 419 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 409.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:409.1-419
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with grade below the stated cutoff, but still reported, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
- Grade below cutoff
Evidence · table
“0.29”
Context: 9.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 0.51Grade Unit: g/tIntercept: 5.4 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 5.4 m
- From
- 430.8 m
- To
- 436.2 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 430.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:430.8-436.2
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.51”
Context: 5.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 1.72Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 458.5 m
- To
- 462.5 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 458.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:458.5-462.5
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.72”
Context: 4.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 0.4Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 482.3 m
- To
- 486.4 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 482.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:482.3-486.4
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.40”
Context: 4.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 2.94Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.94
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 504.7 m
- To
- 505.8 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 504.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:504.7-505.8
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade gold over a narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.94”
Context: 1.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-170Omai · goldGrade: 1.72Grade Unit: g/tIntercept: 8.6 mView all detailsHide details
Identity
- Hole ID
- 26ODD-170
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 8.6 m
- From
- 513.4 m
- To
- 522 m
- Hole Depth
- 577.6 m
- Intercept Depth
- 513.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-170:513.4-522
Location
- Location
- Wenot
- Easting
- 304323
- Northing
- 601936
- Azimuth
- 173 °
- Dip
- -51 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.72”
Context: 8.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 1.67Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.67
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 50.7 m
- To
- 51 m
- Hole Depth
- 550 m
- Intercept Depth
- 50.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:50.7-51
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade over a very narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.67”
Context: 0.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 1.11Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 154.3 m
- To
- 155.5 m
- Hole Depth
- 550 m
- Intercept Depth
- 154.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:154.3-155.5
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade over a very narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.11”
Context: 1.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 0.58Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.58
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 205.3 m
- To
- 207.2 m
- Hole Depth
- 550 m
- Intercept Depth
- 205.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:205.3-207.2
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade over a very narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.58”
Context: 1.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 1.52Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 287.7 m
- To
- 290 m
- Hole Depth
- 550 m
- Intercept Depth
- 287.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:287.7-290
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.52”
Context: 2.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 2.58Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.58
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 297.5 m
- To
- 299 m
- Hole Depth
- 550 m
- Intercept Depth
- 297.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:297.5-299
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade gold over a narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.58”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 2.02Grade Unit: g/tIntercept: 21.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.02
- Grade Unit
- g/t
- Intercept
- 21.5 m
- From
- 334 m
- To
- 355.5 m
- Hole Depth
- 550 m
- Intercept Depth
- 334 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:334-355.5
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade gold over a strong width, indicating significant mineralization.
Positive factors
- New drill intercept
- Strong grade gold
- Strong width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.02”
Context: 21.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 3.75Grade Unit: g/tIntercept: 8.7 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 3.75
- Grade Unit
- g/t
- Intercept
- 8.7 m
- From
- 344 m
- To
- 352.7 m
- Hole Depth
- 550 m
- Intercept Depth
- 344 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:344-352.7
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a moderate width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“3.75”
Context: 8.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 3.49Grade Unit: g/tIntercept: 13.1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 3.49
- Grade Unit
- g/t
- Intercept
- 13.1 m
- From
- 369.6 m
- To
- 382.7 m
- Hole Depth
- 550 m
- Intercept Depth
- 369.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:369.6-382.7
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a moderate width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- Moderate width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“3.49”
Context: 13.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 0.87Grade Unit: g/tIntercept: 25.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.87
- Grade Unit
- g/t
- Intercept
- 25.5 m
- From
- 394.4 m
- To
- 419.9 m
- Hole Depth
- 550 m
- Intercept Depth
- 394.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:394.4-419.9
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade gold over a strong width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- Strong width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.87”
Context: 25.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 1.07Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 394.4 m
- To
- 407.9 m
- Hole Depth
- 550 m
- Intercept Depth
- 394.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:394.4-407.9
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade gold over a moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- Moderate width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.07”
Context: 13.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 2.65Grade Unit: g/tIntercept: 17.2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.65
- Grade Unit
- g/t
- Intercept
- 17.2 m
- From
- 460.5 m
- To
- 477.7 m
- Hole Depth
- 550 m
- Intercept Depth
- 460.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:460.5-477.7
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade gold over a strong width, indicating significant mineralization.
Positive factors
- New drill intercept
- Strong grade gold
- Strong width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.65”
Context: 17.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-171Omai · goldGrade: 14.73Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-171
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 14.73
- Grade Unit
- g/t
- Intercept
- 2.2 m
- From
- 475.5 m
- To
- 477.7 m
- Hole Depth
- 550 m
- Intercept Depth
- 475.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-171:475.5-477.7
Location
- Location
- Wenot
- Easting
- 305880
- Northing
- 601700
- Azimuth
- 176 °
- Dip
- -52 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with bonanza grade gold over a narrow width, indicating a high-grade zone.
Positive factors
- New drill intercept
- Bonanza grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“14.73”
Context: 2.2
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 14.73 g/t Au is exceptionally high-grade, well above the deposit-type norm for orogenic gold.
Evidence · table
“14.73”
Context: 2.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 4.19Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 4.19
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 244.5 m
- To
- 250.5 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 244.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:244.5-250.5
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a moderate width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- Moderate width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“4.19”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 14.97Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 14.97
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 244.5 m
- To
- 246 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 244.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:244.5-246
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with bonanza grade gold over a narrow width, indicating a high-grade zone.
Positive factors
- New drill intercept
- Bonanza grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“14.97”
Context: 1.5
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 14.97 g/t Au is exceptionally high-grade, well above the deposit-type norm for orogenic gold.
Evidence · table
“14.97”
Context: 1.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 4.48Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 4.48
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 265.5 m
- To
- 271.5 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 265.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:265.5-271.5
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a moderate width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- Moderate width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“4.48”
Context: 6.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 0.4Grade Unit: g/tIntercept: 3.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 3.5 m
- From
- 307 m
- To
- 310.5 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 307 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:307-310.5
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.40”
Context: 3.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 6.03Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 6.03
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 327.5 m
- To
- 329.5 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 327.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:327.5-329.5
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with bonanza grade gold over a narrow width, indicating a high-grade zone.
Positive factors
- New drill intercept
- Bonanza grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“6.03”
Context: 2.0
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 6.03 g/t Au is exceptionally high-grade, well above the deposit-type norm for orogenic gold.
Evidence · table
“6.03”
Context: 2.0
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 1.36Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 1.36
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 339 m
- To
- 341.5 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 339 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:339-341.5
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with moderate grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“1.36”
Context: 2.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 0.66Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 346 m
- To
- 349 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 346 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:346-349
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.66”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 3.93Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 3.93
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 433 m
- To
- 436 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 433 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:433-436
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a narrow width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“3.93”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 10.54Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 10.54
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 434 m
- To
- 435 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 434 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:434-435
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with bonanza grade gold over a narrow width, indicating a high-grade zone.
Positive factors
- New drill intercept
- Bonanza grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“10.54”
Context: 1.0
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 10.54 g/t Au is exceptionally high-grade, well above the deposit-type norm for orogenic gold.
Evidence · table
“10.54”
Context: 1.0
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 2.18Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 2.18
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 482 m
- To
- 490 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 482 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:482-490
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with strong grade gold over a moderate width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- Strong grade gold
- Moderate width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“2.18”
Context: 8.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 3.79Grade Unit: g/tIntercept: 3.1 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 3.79
- Grade Unit
- g/t
- Intercept
- 3.1 m
- From
- 485.6 m
- To
- 488.7 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 485.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:485.6-488.7
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a narrow width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“3.79”
Context: 3.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 0.45Grade Unit: g/tIntercept: 19.3 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 19.3 m
- From
- 508.7 m
- To
- 528 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 508.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:508.7-528
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade gold over a strong width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- Strong width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.45”
Context: 19.3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-172Omai · goldGrade: 0.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- 26ODD-172
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 537 m
- To
- 540 m
- Hole Depth
- 613.6 m
- Intercept Depth
- 537 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-172:537-540
Location
- Location
- Wenot
- Easting
- 305379
- Northing
- 601877
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with weak grade and narrow width, contributing to the overall drill program results.
Positive factors
- New drill intercept
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“0.70”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
26ODD-173Omai · goldGrade: 3.49Grade Unit: g/tIntercept: 16.9 mView all detailsHide details
Identity
- Hole ID
- 26ODD-173
- Project
- Omai
- Commodity
- gold
- Region
- guyana
- Reported Region
- guyana
- Ticker
- OMG
Geometry
- Grade
- 3.49
- Grade Unit
- g/t
- Intercept
- 16.9 m
- From
- 194.8 m
- To
- 211.7 m
- Hole Depth
- 481.3 m
- Intercept Depth
- 194.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- 26ODD-173:194.8-211.7
Location
- Location
- Wenot
- Easting
- 305530
- Northing
- 601930
- Azimuth
- 175 °
- Dip
- -54 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Act Labs and MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Cutoff Grade
- 0.3
- Cutoff Unit
- g/t
- Dilution Disclosed
- Yes
- Max Dilution
- 3 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-12T00:00:00.000Z
Reasoning: New drill intercept with high-grade gold over a strong width, indicating significant mineralization.
Positive factors
- New drill intercept
- High-grade gold
- Strong width
- QA/QC disclosed
Negative factors
- Apparent width only
Evidence · table
“3.49”
Context: 16.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions an internal QA/QC program including certified reference materials, blanks, and duplicates, and samples shipped to certified laboratories.
Evidence · text
“Omai maintains an internal QA/QC program to ensure sampling and analysis of all exploration work is conducted in accordance with best practices. Certified reference materials, blanks and duplicates are entered at regular intervals. Samples are sealed in plastic bags. Drill core samples (halved-core) were shipped to Act Labs and some batches to MSALABS, both certified laboratories in Georgetown Guyana, respecting the best chain of custody practices.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The interval is given as downhole width with no true width or drill orientation for this specific intercept.
Evidence · text
“True widths vary as mineralization at Wenot is generally hosted within stockwork vein systems with alteration halos, with an estimated true width range of 70-90%.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“Cut-off grade 0.30 g/t Au with maximum 3.0m internal dilution is applied.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.