ONGold Affirms TPK Drill Program Readiness & Reports Exploration Grab Assays up to 17.96 g/t Au Resulting from the 2026 Phase 1 Field Program
Original announcement by tmx on
- Company
- ONGold Resources Ltd.
- Ticker
- ONAU
- Exchange
- TSX
- Region
- Northern Ontario
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper, Nickel, Cobalt, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-18 14:34:16 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
ONGold Resources Ltd. announced high-grade gold and anomalous base metal grab sample results from its 2026 Phase 1 field exploration program at the TPK Project in Northern Ontario. The program identified new targets, including the Sidewinder Zone with up to 10.69 g/t Au and new EM targets at Discovery West, and confirmed readiness for a fall drill program. The company also referenced several historical high-grade drill intercepts and grab samples, with QA/QC procedures and QP sign-off noted for the current program.
Reasoning: ONGold reported encouraging high-grade gold and base metal grab sample results from its 2026 Phase 1 field program, which successfully identified new targets and advanced the project towards a planned fall drill program. While grab samples are selective and historical data has limitations, the results are positive for early-stage exploration.
Positive factors
- High-grade gold and anomalous base metal grab sample results from new exploration areas.
- Identification of new EM targets and structural interpretations for future drilling.
- Affirmation of readiness for a fall drill program, indicating active exploration progress.
- Detailed QA/QC procedures and QP sign-off enhance data credibility.
Negative factors
- Grab samples are selective and may not be representative of overall mineralization.
- True widths for historical drill intercepts have not been determined.
- Historical data was reviewed but not independently verified by the QP.
Facts used in scoring: 106
Extracted facts
Stored fact records: 106. Some facts used in scoring do not have a stored record.
Drill Results (106)
C1686314TPK · goldGrade: 10.69Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686314
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 10.69
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A high-grade gold grab sample of 10.69 g/t Au was reported from the newly discovered Sidewinder Zone, indicating significant gold mineralization.
Positive factors
- High-grade gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“10.69”
Context: C1686314
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Gold grade of 10.69 g/t is well above the exceptional threshold for gold.
Evidence · table
“10.69”
Context: C1686314
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686314TPK · silverGrade: 2.1Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686314
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.1
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 2.10 ppm was reported alongside high-grade gold, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“2.10”
Context: C1686314
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686314TPK · copperGrade: 542Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686314
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 542
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 542 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“542”
Context: C1686314
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686314TPK · nickelGrade: 34Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686314
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 34
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 34 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“34”
Context: C1686314
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686314TPK · cobaltGrade: 35Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686314
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 35
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 35 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“35”
Context: C1686314
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686314TPK · zincGrade: 21Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686314
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 21
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 21 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“21”
Context: C1686314
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686339TPK · goldGrade: 6.48Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686339
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 6.48
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A high-grade gold grab sample of 6.48 g/t Au was reported from the newly discovered Sidewinder Zone, indicating significant gold mineralization.
Positive factors
- High-grade gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“6.48”
Context: C1686339
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Gold grade of 6.48 g/t is well above the exceptional threshold for gold.
Evidence · table
“6.48”
Context: C1686339
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686339TPK · silverGrade: 1.2Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686339
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.2
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 1.20 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“1.20”
Context: C1686339
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686339TPK · copperGrade: 356Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686339
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 356
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 356 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“356”
Context: C1686339
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686339TPK · nickelGrade: 19Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686339
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 19 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“19”
Context: C1686339
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686339TPK · cobaltGrade: 15Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686339
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 15
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 15 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“15”
Context: C1686339
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686339TPK · zincGrade: 18Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686339
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 18
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 18 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“18”
Context: C1686339
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686306TPK · goldGrade: 5.21Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686306
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5.21
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A high-grade gold grab sample of 5.21 g/t Au was reported from the newly discovered Sidewinder Zone, indicating significant gold mineralization.
Positive factors
- High-grade gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“5.21”
Context: C1686306
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Gold grade of 5.21 g/t is well above the exceptional threshold for gold.
Evidence · table
“5.21”
Context: C1686306
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686306TPK · silverGrade: 0.6Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686306
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.6
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.60 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.60”
Context: C1686306
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686306TPK · copperGrade: 426Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686306
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 426
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 426 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“426”
Context: C1686306
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686306TPK · nickelGrade: 24Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686306
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 24
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 24 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“24”
Context: C1686306
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686306TPK · cobaltGrade: 19Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686306
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 19 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“19”
Context: C1686306
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686306TPK · zincGrade: 15Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686306
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 15
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 15 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“15”
Context: C1686306
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686318TPK · goldGrade: 3.4Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686318
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A strong gold grab sample of 3.40 g/t Au was reported from the newly discovered Sidewinder Zone, indicating significant gold mineralization.
Positive factors
- Strong gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“3.40”
Context: C1686318
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686318TPK · silverGrade: 0.9Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686318
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.9
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.90 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.90”
Context: C1686318
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686318TPK · copperGrade: 85Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686318
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 85
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low copper grade of 85 ppm was reported, indicating trace base metal presence.
Negative factors
- Very low copper grade.
Evidence · table
“85”
Context: C1686318
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686318TPK · nickelGrade: 15Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686318
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 15
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 15 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“15”
Context: C1686318
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686318TPK · cobaltGrade: 7Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686318
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 7
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 7 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“7”
Context: C1686318
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686318TPK · zincGrade: 37Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686318
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 37
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 37 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“37”
Context: C1686318
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686341TPK · goldGrade: 3.1Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686341
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3.1
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A strong gold grab sample of 3.10 g/t Au was reported from the newly discovered Sidewinder Zone, indicating significant gold mineralization.
Positive factors
- Strong gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“3.10”
Context: C1686341
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686341TPK · silverGrade: 1.2Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686341
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.2
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 1.20 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“1.20”
Context: C1686341
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686341TPK · copperGrade: 263Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686341
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 263
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 263 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“263”
Context: C1686341
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686341TPK · nickelGrade: 18Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686341
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 18
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 18 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“18”
Context: C1686341
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686341TPK · cobaltGrade: 17Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686341
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 17
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 17 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“17”
Context: C1686341
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686341TPK · zincGrade: 5Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686341
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 5 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“5”
Context: C1686341
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686317TPK · goldGrade: 2.9Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686317
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A moderate gold grab sample of 2.90 g/t Au was reported from the newly discovered Sidewinder Zone, indicating gold mineralization.
Positive factors
- Moderate gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“2.90”
Context: C1686317
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686317TPK · silverGrade: 2Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686317
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 2.00 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“2.00”
Context: C1686317
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686317TPK · copperGrade: 156Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686317
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 156
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low copper grade of 156 ppm was reported, indicating trace base metal presence.
Negative factors
- Very low copper grade.
Evidence · table
“156”
Context: C1686317
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686317TPK · nickelGrade: 11Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686317
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 11
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 11 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“11”
Context: C1686317
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686317TPK · cobaltGrade: 45Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686317
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 45
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 45 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“45”
Context: C1686317
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686317TPK · zincGrade: 11Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686317
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 11
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 11 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“11”
Context: C1686317
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686338TPK · goldGrade: 2.26Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686338
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.26
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A moderate gold grab sample of 2.26 g/t Au was reported from the newly discovered Sidewinder Zone, indicating gold mineralization.
Positive factors
- Moderate gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“2.26”
Context: C1686338
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686338TPK · silverGrade: 0.6Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686338
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.6
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.60 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.60”
Context: C1686338
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686338TPK · copperGrade: 300Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686338
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 300
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 300 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“300”
Context: C1686338
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686338TPK · nickelGrade: 10Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686338
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 10
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 10 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“10”
Context: C1686338
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686338TPK · cobaltGrade: 32Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686338
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 32
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 32 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“32”
Context: C1686338
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686338TPK · zincGrade: 11Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686338
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 11
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 11 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“11”
Context: C1686338
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686315TPK · goldGrade: 1.38Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686315
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A moderate gold grab sample of 1.38 g/t Au was reported from the newly discovered Sidewinder Zone, indicating gold mineralization.
Positive factors
- Moderate gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“1.38”
Context: C1686315
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686315TPK · silverGrade: 0.6Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686315
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.6
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.60 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.60”
Context: C1686315
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686315TPK · copperGrade: 318Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686315
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 318
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 318 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“318”
Context: C1686315
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686315TPK · nickelGrade: 27Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686315
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 27
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 27 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“27”
Context: C1686315
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686315TPK · cobaltGrade: 13Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686315
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 13
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 13 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“13”
Context: C1686315
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686315TPK · zincGrade: 62Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686315
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 62
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 62 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“62”
Context: C1686315
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686316TPK · goldGrade: 1.08Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686316
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A moderate gold grab sample of 1.08 g/t Au was reported from the newly discovered Sidewinder Zone, indicating gold mineralization.
Positive factors
- Moderate gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“1.08”
Context: C1686316
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686316TPK · silverGrade: 1.1Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686316
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.1
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 1.10 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“1.10”
Context: C1686316
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686316TPK · copperGrade: 234Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686316
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 234
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 234 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“234”
Context: C1686316
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686316TPK · nickelGrade: 17Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686316
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 17
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 17 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“17”
Context: C1686316
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686316TPK · cobaltGrade: 8Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686316
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 8
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 8 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“8”
Context: C1686316
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686316TPK · zincGrade: 17Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686316
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 17
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 17 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“17”
Context: C1686316
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686342TPK · goldGrade: 0.89Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686342
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.89
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A weak gold grab sample of 0.89 g/t Au was reported from the newly discovered Sidewinder Zone, indicating gold mineralization.
Positive factors
- Weak gold assay from a newly discovered zone.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“0.89”
Context: C1686342
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686342TPK · silverGrade: 0.6Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686342
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.6
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.60 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.60”
Context: C1686342
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686342TPK · copperGrade: 275Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686342
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 275
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 275 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“275”
Context: C1686342
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686342TPK · nickelGrade: 23Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686342
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 23
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 23 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“23”
Context: C1686342
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686342TPK · cobaltGrade: 19Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686342
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 19 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“19”
Context: C1686342
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686342TPK · zincGrade: 19Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686342
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Sidewinder
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 19 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“19”
Context: C1686342
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686301TPK · goldGrade: 144.68Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686301
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 144.68
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: An exceptional high-grade gold grab sample of 144.68 g/t Au was reported from boulder sampling at Gold Ridge, indicating significant gold potential, though its source is unconfirmed.
Positive factors
- Exceptional high-grade gold assay from boulder sampling.
Negative factors
- Boulder sample is selective and may not be representative of in-situ mineralization.
- Source of float boulder not established.
Evidence · table
“144.68”
Context: C1686301
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Gold grade of 144.68 g/t is exceptionally high, well above the bonanza threshold.
Evidence · table
“144.68”
Context: C1686301
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686301TPK · silverGrade: 1.7Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686301
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.7
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 1.70 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“1.70”
Context: C1686301
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686301TPK · copperGrade: 138Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686301
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 138
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low copper grade of 138 ppm was reported, indicating trace base metal presence.
Negative factors
- Very low copper grade.
Evidence · table
“138”
Context: C1686301
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686301TPK · nickelGrade: 85Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686301
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 85
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 85 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“85”
Context: C1686301
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686301TPK · cobaltGrade: 1140Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686301
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1140
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: An elevated cobalt grade of 1,140 ppm was reported, indicating a notable presence.
Positive factors
- Elevated cobalt grade.
Evidence · table
“1,140”
Context: C1686301
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686301TPK · zincGrade: 6Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686301
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 6
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 6 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“6”
Context: C1686301
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686313TPK · goldGrade: 28.48Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686313
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 28.48
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: An exceptional high-grade gold grab sample of 28.48 g/t Au was reported from boulder sampling at Gold Ridge, indicating significant gold potential, though its source is unconfirmed.
Positive factors
- Exceptional high-grade gold assay from boulder sampling.
Negative factors
- Boulder sample is selective and may not be representative of in-situ mineralization.
- Source of float boulder not established.
Evidence · table
“28.48”
Context: C1686313
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Gold grade of 28.48 g/t is exceptionally high, well above the bonanza threshold.
Evidence · table
“28.48”
Context: C1686313
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686313TPK · copperGrade: 5Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686313
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low copper grade of 5 ppm was reported, indicating trace base metal presence.
Negative factors
- Very low copper grade.
Evidence · table
“5”
Context: C1686313
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686313TPK · nickelGrade: 11Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686313
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 11
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 11 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“11”
Context: C1686313
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686313TPK · cobaltGrade: 3Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686313
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 3 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“3”
Context: C1686313
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686313TPK · zincGrade: 21Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686313
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 21
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 21 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“21”
Context: C1686313
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686307TPK · goldGrade: 1.02Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686307
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A moderate gold grab sample of 1.02 g/t Au was reported from boulder sampling at Gold Ridge, indicating gold potential, though its source is unconfirmed.
Positive factors
- Moderate gold assay from boulder sampling.
Negative factors
- Grab sample is selective and may not be representative of in-situ mineralization.
- Source of float boulder not established.
Evidence · table
“1.02”
Context: C1686307
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686307TPK · silverGrade: 5.5Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686307
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5.5
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 5.50 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“5.50”
Context: C1686307
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686307TPK · copperGrade: 1650Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686307
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1650
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: An elevated copper grade of 1,650 ppm was reported, indicating a notable presence.
Positive factors
- Elevated copper grade.
Evidence · table
“1,650”
Context: C1686307
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686307TPK · copperGrade: 0.17Grade Unit: %View all detailsHide details
Identity
- Hole ID
- C1686307
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.17
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: An elevated copper grade of 0.17% was reported, indicating a notable presence.
Positive factors
- Elevated copper grade.
Evidence · table
“0.17%”
Context: C1686307
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686307TPK · nickelGrade: 68Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686307
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 68
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 68 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“68”
Context: C1686307
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686307TPK · cobaltGrade: 56Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686307
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 56
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 56 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“56”
Context: C1686307
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686307TPK · zincGrade: 79Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686307
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 79
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Gold Ridge
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 79 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“79”
Context: C1686307
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686337TPK · goldGrade: 17.96Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686337
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 17.96
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A high-grade gold grab sample of 17.96 g/t Au was reported from outcrop sampling at Rowlandson Lake, indicating significant gold mineralization.
Positive factors
- High-grade gold assay from outcrop sampling.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“17.96”
Context: C1686337
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Gold grade of 17.96 g/t is well above the exceptional threshold for gold.
Evidence · table
“17.96”
Context: C1686337
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686337TPK · silverGrade: 0.25Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686337
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.25 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.25”
Context: C1686337
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686337TPK · copperGrade: 865Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686337
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 865
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 865 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“865”
Context: C1686337
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686337TPK · nickelGrade: 109Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686337
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 109
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 109 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“109”
Context: C1686337
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686337TPK · cobaltGrade: 103Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686337
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 103
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 103 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“103”
Context: C1686337
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686337TPK · zincGrade: 277Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686337
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 277
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 277 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“277”
Context: C1686337
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686404TPK · goldGrade: 4.55Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686404
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 4.55
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A strong gold grab sample of 4.55 g/t Au was reported from outcrop sampling at Rowlandson Lake, indicating significant gold mineralization.
Positive factors
- Strong gold assay from outcrop sampling.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“4.55”
Context: C1686404
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686404TPK · silverGrade: 0.25Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686404
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.25 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.25”
Context: C1686404
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686404TPK · copperGrade: 1910Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686404
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1910
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: An elevated copper grade of 1,910 ppm was reported, indicating a notable presence.
Positive factors
- Elevated copper grade.
Evidence · table
“1,910”
Context: C1686404
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686404TPK · copperGrade: 0.19Grade Unit: %View all detailsHide details
Identity
- Hole ID
- C1686404
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.19
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: An elevated copper grade of 0.19% was reported, indicating a notable presence.
Positive factors
- Elevated copper grade.
Evidence · table
“0.19%”
Context: C1686404
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686404TPK · nickelGrade: 194Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686404
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 194
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 194 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“194”
Context: C1686404
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686404TPK · cobaltGrade: 51Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686404
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 51
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 51 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“51”
Context: C1686404
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686404TPK · zincGrade: 143Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686404
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 143
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 143 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“143”
Context: C1686404
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686403TPK · goldGrade: 2.64Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686403
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.64
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A moderate gold grab sample of 2.64 g/t Au was reported from outcrop sampling at Rowlandson Lake, indicating gold mineralization.
Positive factors
- Moderate gold assay from outcrop sampling.
Negative factors
- Grab sample is selective and may not be representative.
Evidence · table
“2.64”
Context: C1686403
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686403TPK · silverGrade: 0.25Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686403
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.25
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low silver grade of 0.25 ppm was reported, indicating trace silver presence.
Negative factors
- Very low silver grade.
Evidence · table
“0.25”
Context: C1686403
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686403TPK · copperGrade: 544Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686403
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 544
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low copper grade of 544 ppm was reported, indicating minor base metal presence.
Negative factors
- Low copper grade.
Evidence · table
“544”
Context: C1686403
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686403TPK · nickelGrade: 89Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686403
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 89
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 89 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“89”
Context: C1686403
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686403TPK · cobaltGrade: 32Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686403
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 32
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 32 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“32”
Context: C1686403
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686403TPK · zincGrade: 80Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686403
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 80
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Rowlandson Lake
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 80 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“80”
Context: C1686403
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686409TPK · goldGrade: 0.172Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686409
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.172
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low gold grab sample of 0.172 g/t Au was reported, indicating trace gold presence.
Negative factors
- Very low gold grade.
Evidence · table
“0.172”
Context: C1686409
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686409TPK · silverGrade: 2.9Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686409
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.9
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 2.90 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“2.90”
Context: C1686409
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686409TPK · copperGrade: 19600Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686409
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19600
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A strong copper grade of 19,600 ppm was reported, indicating significant copper presence.
Positive factors
- Strong copper grade.
Evidence · table
“19,600”
Context: C1686409
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686409TPK · copperGrade: 1.96Grade Unit: %View all detailsHide details
Identity
- Hole ID
- C1686409
- Project
- TPK
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.96
- Grade Unit
- %
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A strong copper grade of 1.96% was reported, indicating significant copper presence.
Positive factors
- Strong copper grade.
Evidence · table
“1.96%”
Context: C1686409
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686409TPK · nickelGrade: 630Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686409
- Project
- TPK
- Commodity
- nickel
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 630
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low nickel grade of 630 ppm was reported, indicating trace presence.
Negative factors
- Very low nickel grade.
Evidence · table
“630”
Context: C1686409
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686409TPK · cobaltGrade: 121Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686409
- Project
- TPK
- Commodity
- cobalt
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 121
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low cobalt grade of 121 ppm was reported, indicating trace presence.
Negative factors
- Very low cobalt grade.
Evidence · table
“121”
Context: C1686409
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686409TPK · zincGrade: 67Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686409
- Project
- TPK
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 67
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low zinc grade of 67 ppm was reported, indicating trace presence.
Negative factors
- Very low zinc grade.
Evidence · table
“67”
Context: C1686409
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686407TPK · goldGrade: 0.147Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- C1686407
- Project
- TPK
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.147
- Grade Unit
- g/t
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A very low gold grab sample of 0.147 g/t Au was reported, indicating trace gold presence.
Negative factors
- Very low gold grade.
Evidence · table
“0.147”
Context: C1686407
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
C1686407TPK · silverGrade: 3.2Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- C1686407
- Project
- TPK
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3.2
- Grade Unit
- ppm
Classification
- Sample Type
- surface
Location
- Location
- Copper Point
- Loc. Source
- document
QA/QC
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates, check_assays
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-24T00:00:00.000Z
Reasoning: A low silver grade of 3.20 ppm was reported, indicating minor silver presence.
Negative factors
- Low silver grade.
Evidence · table
“3.20”
Context: C1686407
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes detailed QA/QC disclosure, including certified labs and methods.
Evidence · text
“Quality assurance and quality control ("QA/QC") procedures were implemented for the 2026 field program. Rock grab samples were placed in security-sealed bags for shipment, and approximately 5% of the rock samples were dispatched to a secondary laboratory for check assays. Commercially prepared certified reference material standards and blanks were inserted as part of the QA/QC program. Samples were analyzed at Activation Laboratories ("Actlabs") facilities in Thunder Bay and Ancaster, Ontario, which are ISO 17025 and ISO 9001 certified.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.