ONGold Intercepts High-Grade Copper, Silver with Gold in Newly Identified Massive Sulphide Zone at Gold Ridge: 11.10% Cu, 218 g/t Ag and 4.45 g/t Au over 0.4 Metres in Hole GR-25-012
Original announcement by tmx on
- Company
- ONGold Resources Ltd.
- Ticker
- ONAU
- Exchange
- TSX
- Region
- Northern Ontario
- Primary commodity
- Gold
- Secondary commodities
- Copper, Silver
- Document categories
- Drill results
- Extracted
- 2026-09-18 15:10:53 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
ONGold Resources Ltd. announced high-grade copper, silver, and gold drill results from its Gold Ridge project in Northern Ontario, including an exceptional intercept of 11.10% Cu, 218 g/t Ag, and 4.45 g/t Au over 0.4 metres in hole GR-25-012. The program identified a new massive sulphide zone and extended known gold mineralization, confirming a large orogenic copper-gold system. The company plans further exploration to define the extent of these new discoveries.
Reasoning: ONGold announced high-grade copper, silver, and gold intercepts from a newly identified massive sulphide zone at its Gold Ridge project in Northern Ontario. The headline intercept of 11.10% Cu, 218 g/t Ag, and 4.45 g/t Au over 0.4 metres in hole GR-25-012 is exceptional. The drilling also extended known gold mineralization and confirmed a large orogenic copper-gold system, suggesting significant exploration upside. While QA/QC is robust, the lack of true width information introduces some uncertainty.
Positive factors
- Discovery of a new high-grade massive sulphide zone with exceptional copper, silver, and gold grades.
- Extension of known gold mineralization 1.0 km north of the Discovery Zone, indicating significant potential.
- Strong QA/QC procedures and QP sign-off enhance the credibility of the results.
Negative factors
- True widths of mineralized intersections are not known, which may overstate apparent widths.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 87
Extracted facts
Stored fact records: 87. Some facts used in scoring do not have a stored record.
Drill Results (87)
GR-25-011Gold Ridge · goldGrade: 17.12Grade Unit: g/tIntercept: 9.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 17.12
- Grade Unit
- g/t
- Intercept
- 9.4 m
- From
- 10.7 m
- To
- 20 m
- Hole Depth
- 80 m
- Intercept Depth
- 10.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:10.7-20
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported gold intercept from the Discovery Zone. While the grade is good, its historical nature reduces novelty. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“17.12”
Context: 10.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · silverGrade: 0.9Grade Unit: g/tIntercept: 9.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 9.4 m
- From
- 10.7 m
- To
- 20 m
- Hole Depth
- 80 m
- Intercept Depth
- 10.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:10.7-20
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported silver intercept from the Discovery Zone. The grade is low and its historical nature reduces novelty. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“0.9”
Context: 10.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · goldGrade: 19.39Grade Unit: g/tIntercept: 8.2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19.39
- Grade Unit
- g/t
- Intercept
- 8.2 m
- From
- 11.8 m
- To
- 20 m
- Hole Depth
- 80 m
- Intercept Depth
- 11.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:11.8-20
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported high-grade gold intercept. Its historical nature reduces novelty, but the grade is strong. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“19.39”
Context: 11.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · silverGrade: 1Grade Unit: g/tIntercept: 8.2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 8.2 m
- From
- 11.8 m
- To
- 20 m
- Hole Depth
- 80 m
- Intercept Depth
- 11.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:11.8-20
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported silver intercept. The grade is low and its historical nature reduces novelty. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“1.0”
Context: 11.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · goldGrade: 308Grade Unit: g/tIntercept: 0.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 308
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 11.8 m
- To
- 12.1 m
- Hole Depth
- 80 m
- Intercept Depth
- 11.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:11.8-12.1
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported bonanza-grade gold intercept, but its very narrow width and historical nature reduce its overall impact. The lack of true width information is a negative factor.
Positive factors
- Exceptional high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“308”
Context: 11.8
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 308 g/t Au is an exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“308”
Context: 11.8
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · silverGrade: 14.6Grade Unit: g/tIntercept: 0.3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 14.6
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 11.8 m
- To
- 12.1 m
- Hole Depth
- 80 m
- Intercept Depth
- 11.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:11.8-12.1
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported silver intercept. The grade is low and its historical nature reduces novelty. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“14.6”
Context: 11.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · goldGrade: 24.8Grade Unit: g/tIntercept: 0.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 24.8
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 12.1 m
- To
- 12.8 m
- Hole Depth
- 80 m
- Intercept Depth
- 12.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:12.1-12.8
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported high-grade gold intercept. Its historical nature reduces novelty. The narrow width and lack of true width information are negative factors.
Positive factors
- Strong high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“24.80”
Context: 12.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · silverGrade: 2.1Grade Unit: g/tIntercept: 0.7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 12.1 m
- To
- 12.8 m
- Hole Depth
- 80 m
- Intercept Depth
- 12.1 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:12.1-12.8
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported silver intercept. The grade is low and its historical nature reduces novelty. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“2.1”
Context: 12.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · goldGrade: 12.2Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 12.2
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 17 m
- To
- 18.5 m
- Hole Depth
- 80 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:17-18.5
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported high-grade gold intercept. Its historical nature reduces novelty. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“12.20”
Context: 17.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · silverGrade: 0.7Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 17 m
- To
- 18.5 m
- Hole Depth
- 80 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:17-18.5
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported silver intercept. The grade is low and its historical nature reduces novelty. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“0.7”
Context: 17.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · goldGrade: 20.1Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 20.1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 18.5 m
- To
- 20 m
- Hole Depth
- 80 m
- Intercept Depth
- 18.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:18.5-20
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported high-grade gold intercept. Its historical nature reduces novelty. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“20.10”
Context: 18.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-011Gold Ridge · silverGrade: 0.4Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 18.5 m
- To
- 20 m
- Hole Depth
- 80 m
- Intercept Depth
- 18.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-011:18.5-20
- Mining Method
- underground
Location
- Location
- Discovery
- Easting
- 432055
- Northing
- 5823323
- Elevation
- 272 m
- Azimuth
- 170 °
- Dip
- 50 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a previously reported silver intercept. The grade is low and its historical nature reduces novelty. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
- Result is historical and previously reported.
Evidence · table
“0.4”
Context: 18.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: This intercept was previously reported on November 4, 2025.
Evidence · text
“Previously reported intercept of 19.39 g/t Au and 1.0 g/t Ag over a core length of 8.2 m (11.8 to 20.0 m)... (see Press Release dated November 4, 2025).”
GR-25-012Gold Ridge · goldGrade: 0.73Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.73
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 149.2 m
- To
- 149.7 m
- Hole Depth
- 329 m
- Intercept Depth
- 149.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:149.2-149.7
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new gold intercept, but the grade is moderate and the width is very narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.73”
Context: 149.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · silverGrade: 23.4Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 23.4
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 149.2 m
- To
- 149.7 m
- Hole Depth
- 329 m
- Intercept Depth
- 149.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:149.2-149.7
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept, but the grade is weak and the width is very narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“23.4”
Context: 149.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · copperGrade: 0.79Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 149.2 m
- To
- 149.7 m
- Hole Depth
- 329 m
- Intercept Depth
- 149.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:149.2-149.7
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept, but the grade is moderate and the width is very narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.79%”
Context: 149.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · goldGrade: 0.3Grade Unit: g/tIntercept: 56.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 56.4 m
- From
- 206 m
- To
- 262.4 m
- Hole Depth
- 329 m
- Intercept Depth
- 206 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:206-262.4
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new gold intercept with a significant length, but the grade is at the weak threshold. The lack of true width information is a negative factor.
Positive factors
- Long intercept length.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.30”
Context: 206.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · silverGrade: 1.6Grade Unit: g/tIntercept: 56.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 56.4 m
- From
- 206 m
- To
- 262.4 m
- Hole Depth
- 329 m
- Intercept Depth
- 206 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:206-262.4
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept with a significant length, but the grade is very low. The lack of true width information is a negative factor.
Positive factors
- Long intercept length.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“1.6”
Context: 206.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · copperGrade: 155Grade Unit: ppmIntercept: 56.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 155
- Grade Unit
- ppm
- Intercept
- 56.4 m
- From
- 206 m
- To
- 262.4 m
- Hole Depth
- 329 m
- Intercept Depth
- 206 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:206-262.4
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept with a significant length, but the grade is very low (ppm). The lack of true width information is a negative factor.
Positive factors
- Long intercept length.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“155”
Context: 206.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · goldGrade: 1.25Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 208 m
- To
- 213.9 m
- Hole Depth
- 329 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:208-213.9
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new gold intercept with a moderate grade and reasonable width. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“1.25”
Context: 208.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · silverGrade: 5.4Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5.4
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 208 m
- To
- 213.9 m
- Hole Depth
- 329 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:208-213.9
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept with a low grade and reasonable width. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“5.4”
Context: 208.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · copperGrade: 265Grade Unit: ppmIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 265
- Grade Unit
- ppm
- Intercept
- 5.9 m
- From
- 208 m
- To
- 213.9 m
- Hole Depth
- 329 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:208-213.9
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept with a very low grade (ppm) and reasonable width. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“265”
Context: 208.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · goldGrade: 2.24Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.24
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 208 m
- To
- 209.6 m
- Hole Depth
- 329 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:208-209.6
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade gold intercept, but the width is narrow. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“2.24”
Context: 208.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · silverGrade: 3.9Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 208 m
- To
- 209.6 m
- Hole Depth
- 329 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:208-209.6
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept with a low grade and narrow width. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“3.9”
Context: 208.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · copperGrade: 113Grade Unit: ppmIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 113
- Grade Unit
- ppm
- Intercept
- 1.6 m
- From
- 208 m
- To
- 209.6 m
- Hole Depth
- 329 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:208-209.6
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept with a very low grade (ppm) and narrow width. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“113”
Context: 208.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · goldGrade: 2.08Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.08
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 212.7 m
- To
- 213.9 m
- Hole Depth
- 329 m
- Intercept Depth
- 212.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:212.7-213.9
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade gold intercept, but the width is narrow. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“2.08”
Context: 212.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · silverGrade: 19.9Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19.9
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 212.7 m
- To
- 213.9 m
- Hole Depth
- 329 m
- Intercept Depth
- 212.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:212.7-213.9
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept with a weak grade and narrow width. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“19.9”
Context: 212.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · copperGrade: 0.09Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 212.7 m
- To
- 213.9 m
- Hole Depth
- 329 m
- Intercept Depth
- 212.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:212.7-213.9
- Mining Method
- underground
Location
- Location
- West Discovery
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept with a very low grade and narrow width. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.09%”
Context: 212.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · goldGrade: 1.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 318.5 m
- To
- 320 m
- Hole Depth
- 329 m
- Intercept Depth
- 318.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:318.5-320
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade gold intercept within a significant copper-silver zone. The grade is strong, but the width is narrow and true width is unknown.
Positive factors
- Strong high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“1.50”
Context: 318.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · silverGrade: 60.3Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 60.3
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 318.5 m
- To
- 320 m
- Hole Depth
- 329 m
- Intercept Depth
- 318.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:318.5-320
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade silver intercept within a significant copper-gold zone. The grade is strong, but the width is narrow and true width is unknown.
Positive factors
- Strong high-grade silver intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“60.3”
Context: 318.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · copperGrade: 3.06Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3.06
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 318.5 m
- To
- 320 m
- Hole Depth
- 329 m
- Intercept Depth
- 318.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:318.5-320
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade copper intercept within a significant gold-silver zone. The grade is strong, but the width is narrow and true width is unknown.
Positive factors
- Strong high-grade copper intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“3.06%”
Context: 318.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · goldGrade: 4.45Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 4.45
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 319.2 m
- To
- 319.6 m
- Hole Depth
- 329 m
- Intercept Depth
- 319.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:319.2-319.6
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is an exceptional high-grade gold intercept within a very high-grade copper-silver zone, indicating a bonanza-grade intersection. The narrow width and unknown true width are minor negative factors given the grades.
Positive factors
- Exceptional high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“4.45”
Context: 319.2
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 4.45 g/t Au is an exceptionally high-grade zone for an orogenic deposit, especially when combined with high copper and silver.
Evidence · table
“4.45”
Context: 319.2
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · silverGrade: 218Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 218
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 319.2 m
- To
- 319.6 m
- Hole Depth
- 329 m
- Intercept Depth
- 319.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:319.2-319.6
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is an exceptional high-grade silver intercept within a very high-grade copper-gold zone, indicating a bonanza-grade intersection. The narrow width and unknown true width are minor negative factors given the grades.
Positive factors
- Exceptional high-grade silver intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“218”
Context: 319.2
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 218 g/t Ag is an exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“218”
Context: 319.2
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-012Gold Ridge · copperGrade: 11.1Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-012
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 11.1
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 319.2 m
- To
- 319.6 m
- Hole Depth
- 329 m
- Intercept Depth
- 319.2 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-012:319.2-319.6
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 350 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is an exceptional high-grade copper intercept, representing a new discovery of massive sulphide mineralization. The grade is bonanza-level, making this a highly material and novel result despite the narrow width and unknown true width.
Positive factors
- Exceptional high-grade copper intercept, indicating a bonanza-grade massive sulphide zone.
- New discovery of massive sulphide mineralization.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“11.10%”
Context: 319.2
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 11.10% Cu is an exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“11.10%”
Context: 319.2
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · goldGrade: 0.28Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 154 m
- To
- 155 m
- Hole Depth
- 329 m
- Intercept Depth
- 154 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:154-155
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new gold intercept, but the grade is weak and the width is narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.28”
Context: 154.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · silverGrade: 2.1Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 154 m
- To
- 155 m
- Hole Depth
- 329 m
- Intercept Depth
- 154 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:154-155
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-11-04T00:00:00.000Z
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept, but the grade is very low and the width is narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“2.1”
Context: 154.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · copperGrade: 0.09Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1 m
- From
- 154 m
- To
- 155 m
- Hole Depth
- 329 m
- Intercept Depth
- 154 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:154-155
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept, but the grade is very low and the width is narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.09%”
Context: 154.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · goldGrade: 1.79Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 157.8 m
- To
- 158.1 m
- Hole Depth
- 329 m
- Intercept Depth
- 157.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:157.8-158.1
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade gold intercept, but the width is very narrow. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade gold intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“1.79”
Context: 157.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · silverGrade: 42.4Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 42.4
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 157.8 m
- To
- 158.1 m
- Hole Depth
- 329 m
- Intercept Depth
- 157.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:157.8-158.1
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade silver intercept, but the width is very narrow. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade silver intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“42.4”
Context: 157.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · copperGrade: 2.95Grade Unit: %Intercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.95
- Grade Unit
- %
- Intercept
- 0.3 m
- From
- 157.8 m
- To
- 158.1 m
- Hole Depth
- 329 m
- Intercept Depth
- 157.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:157.8-158.1
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade copper intercept, but the width is very narrow. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade copper intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“2.95%”
Context: 157.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · goldGrade: 0.1Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 217.7 m
- To
- 222.1 m
- Hole Depth
- 329 m
- Intercept Depth
- 217.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:217.7-222.1
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new gold intercept, but the grade is very low and below the weak threshold. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.10”
Context: 217.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · silverGrade: 2.4Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.4
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 217.7 m
- To
- 222.1 m
- Hole Depth
- 329 m
- Intercept Depth
- 217.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:217.7-222.1
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept, but the grade is very low and the width is narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“2.4”
Context: 217.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · copperGrade: 0.16Grade Unit: %Intercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 4.4 m
- From
- 217.7 m
- To
- 222.1 m
- Hole Depth
- 329 m
- Intercept Depth
- 217.7 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:217.7-222.1
- Mining Method
- underground
Location
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept, but the grade is very low and below the weak threshold. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.16%”
Context: 217.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · goldGrade: 0.97Grade Unit: g/tIntercept: 0.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 294.6 m
- To
- 295 m
- Hole Depth
- 329 m
- Intercept Depth
- 294.6 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:294.6-295
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new gold intercept, but the grade is weak and the width is very narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.97”
Context: 294.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · silverGrade: 20.6Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 20.6
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 294.6 m
- To
- 295 m
- Hole Depth
- 329 m
- Intercept Depth
- 294.6 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:294.6-295
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept, but the grade is weak and the width is very narrow. The lack of true width information is a negative factor.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“20.6”
Context: 294.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-013Gold Ridge · copperGrade: 0.96Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-013
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.96
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 294.6 m
- To
- 295 m
- Hole Depth
- 329 m
- Intercept Depth
- 294.6 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-013:294.6-295
- Mining Method
- underground
Location
- Location
- West Discovery Copper
- Easting
- 430555
- Northing
- 5822840
- Elevation
- 260 m
- Azimuth
- 20 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade copper intercept, but the width is very narrow. The lack of true width information is a negative factor.
Positive factors
- Strong high-grade copper intercept.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.96%”
Context: 294.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-014Gold Ridge · goldGrade: 5.21Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-014
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5.21
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 200.5 m
- To
- 202 m
- Hole Depth
- 305 m
- Intercept Depth
- 200.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-014:200.5-202
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 260 m
- Azimuth
- 300 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is an exceptional high-grade gold intercept that extended known mineralization, making it a material and novel result. The narrow width and unknown true width are minor negative factors.
Positive factors
- Exceptional high-grade gold intercept.
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“5.21”
Context: 200.5
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 5.21 g/t Au is an exceptionally high-grade zone for an orogenic deposit.
Evidence · table
“5.21”
Context: 200.5
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone.
Evidence · text
“Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-014Gold Ridge · silverGrade: 0.6Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-014
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 200.5 m
- To
- 202 m
- Hole Depth
- 305 m
- Intercept Depth
- 200.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-014:200.5-202
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 260 m
- Azimuth
- 300 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept with a very low grade, but it contributes to extending known mineralization. The lack of true width information is a negative factor.
Positive factors
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.6”
Context: 200.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone.
Evidence · text
“Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-014Gold Ridge · copperGrade: 18Grade Unit: ppmIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-014
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 18
- Grade Unit
- ppm
- Intercept
- 1.5 m
- From
- 200.5 m
- To
- 202 m
- Hole Depth
- 305 m
- Intercept Depth
- 200.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-014:200.5-202
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 260 m
- Azimuth
- 300 °
- Dip
- 47 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept with a very low grade (ppm), but it contributes to extending known mineralization. The lack of true width information is a negative factor.
Positive factors
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“18”
Context: 200.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone.
Evidence · text
“Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-015Gold Ridge · goldGrade: 2Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- GR-25-015
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 203 m
- To
- 205 m
- Hole Depth
- 305 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-015:203-205
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 270 m
- Azimuth
- 120 °
- Dip
- 45 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new high-grade gold intercept that extended known mineralization, making it a material and novel result. The unknown true width is a minor negative factor.
Positive factors
- Strong high-grade gold intercept.
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“2.00”
Context: 203.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone.
Evidence · text
“Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-015Gold Ridge · silverGrade: 0.4Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- GR-25-015
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 203 m
- To
- 205 m
- Hole Depth
- 305 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-015:203-205
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 270 m
- Azimuth
- 120 °
- Dip
- 45 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept with a very low grade, but it contributes to extending known mineralization. The lack of true width information is a negative factor.
Positive factors
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.4”
Context: 203.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-015Gold Ridge · copperGrade: 87Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- GR-25-015
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 87
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 203 m
- To
- 205 m
- Hole Depth
- 305 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-015:203-205
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 270 m
- Azimuth
- 120 °
- Dip
- 45 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept with a very low grade (ppm), but it contributes to extending known mineralization. The lack of true width information is a negative factor.
Positive factors
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“87”
Context: 203.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-015Gold Ridge · goldGrade: 3.47Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- GR-25-015
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3.47
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 203 m
- To
- 204 m
- Hole Depth
- 305 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-015:203-204
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 270 m
- Azimuth
- 120 °
- Dip
- 45 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is an exceptional high-grade gold intercept that extended known mineralization, making it a material and novel result. The narrow width and unknown true width are minor negative factors.
Positive factors
- Exceptional high-grade gold intercept.
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“3.47”
Context: 203.0
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 3.47 g/t Au is an exceptionally high-grade zone for an orogenic deposit.
Evidence · table
“3.47”
Context: 203.0
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone.
Evidence · text
“Drill holes GR-25-014 and GR-25-015 extended known gold mineralization 1.0 km north of the Discovery Zone”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-015Gold Ridge · silverGrade: 0.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- GR-25-015
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 203 m
- To
- 204 m
- Hole Depth
- 305 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-015:203-204
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 270 m
- Azimuth
- 120 °
- Dip
- 45 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new silver intercept with a very low grade, but it contributes to extending known mineralization. The lack of true width information is a negative factor.
Positive factors
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“0.4”
Context: 203.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-015Gold Ridge · copperGrade: 52Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- GR-25-015
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 52
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 203 m
- To
- 204 m
- Hole Depth
- 305 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- GR-25-015:203-204
- Mining Method
- underground
Location
- Easting
- 432321
- Northing
- 5824301
- Elevation
- 270 m
- Azimuth
- 120 °
- Dip
- 45 °
- Loc. Confidence
- medium
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: This is a new copper intercept with a very low grade (ppm), but it contributes to extending known mineralization. The lack of true width information is a negative factor.
Positive factors
- Extended known gold mineralization 1.0 km north of the Discovery Zone.
Negative factors
- True widths of mineralized intersections are not known.
Evidence · table
“52”
Context: 203.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: True widths of mineralized intersections are not known at this time.
Evidence · text
“True widths of mineralized intersections are not known at this time.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-011Gold Ridge · copperGrade: 46Grade Unit: ppmIntercept: 9.4 mView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 46
- Grade Unit
- ppm
- Intercept
- 9.4 m
- From
- 10.7 m
- To
- 20 m
- Intercept Depth
- 10.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- GR-25-011:10.7-20
- Mining Method
- underground
Location
- Location
- Discovery
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 46 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“46”
Context: GR-25-011
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-011Gold Ridge · copperGrade: 47Grade Unit: ppmIntercept: 8.2 mView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 47
- Grade Unit
- ppm
- Intercept
- 8.2 m
- From
- 11.8 m
- To
- 20 m
- Intercept Depth
- 11.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- GR-25-011:11.8-20
- Mining Method
- underground
Location
- Location
- Discovery
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 47 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“47”
Context: Including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-011Gold Ridge · copperGrade: 5Grade Unit: ppmIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5
- Grade Unit
- ppm
- Intercept
- 0.3 m
- From
- 11.8 m
- To
- 12.1 m
- Intercept Depth
- 11.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- GR-25-011:11.8-12.1
- Mining Method
- underground
Location
- Location
- Discovery
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 5 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“5”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-011Gold Ridge · copperGrade: 2Grade Unit: ppmIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2
- Grade Unit
- ppm
- Intercept
- 0.7 m
- From
- 12.1 m
- To
- 12.8 m
- Intercept Depth
- 12.1 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- GR-25-011:12.1-12.8
- Mining Method
- underground
Location
- Location
- Discovery
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 2 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“2”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-011Gold Ridge · copperGrade: 32Grade Unit: ppmIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 32
- Grade Unit
- ppm
- Intercept
- 1.5 m
- From
- 17 m
- To
- 18.5 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- GR-25-011:17-18.5
- Mining Method
- underground
Location
- Location
- Discovery
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 32 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“32”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
GR-25-011Gold Ridge · copperGrade: 97Grade Unit: ppmIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- GR-25-011
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 97
- Grade Unit
- ppm
- Intercept
- 1.5 m
- From
- 18.5 m
- To
- 20 m
- Intercept Depth
- 18.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- GR-25-011:18.5-20
- Mining Method
- underground
Location
- Location
- Discovery
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 97 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“97”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 0.3Grade Unit: g/tIntercept: 56.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 56.4 m
- From
- 206 m
- To
- 262.4 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 206 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:206-262.4
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 g/t gold is weak against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 16.9 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 1.6Grade Unit: g/tIntercept: 56.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.6
- Grade Unit
- g/t
- Intercept
- 56.4 m
- From
- 206 m
- To
- 262.4 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 206 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:206-262.4
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 90.2 g/t·m is below.
Negative factors
- 1.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 155Grade Unit: ppmIntercept: 56.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 155
- Grade Unit
- ppm
- Intercept
- 56.4 m
- From
- 206 m
- To
- 262.4 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 206 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:206-262.4
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 155 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“155”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 1.25Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 208 m
- To
- 213.9 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:208-213.9
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.25 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 7.4 g/t·m is below.
Negative factors
- 1.25 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.25”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 5.4Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 5.4
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 208 m
- To
- 213.9 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:208-213.9
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 5.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 31.9 g/t·m is below.
Negative factors
- 5.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.4”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 265Grade Unit: ppmIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 265
- Grade Unit
- ppm
- Intercept
- 5.9 m
- From
- 208 m
- To
- 213.9 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:208-213.9
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 265 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“265”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 2.24Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.24
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 208 m
- To
- 209.6 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:208-209.6
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.24 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 3.6 g/t·m is below.
Negative factors
- 2.24 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.24”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 3.9Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 208 m
- To
- 209.6 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:208-209.6
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.2 g/t·m is below.
Negative factors
- 3.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.9”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 113Grade Unit: ppmIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 113
- Grade Unit
- ppm
- Intercept
- 1.6 m
- From
- 208 m
- To
- 209.6 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 208 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:208-209.6
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 113 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“113”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 2.08Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.08
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 212.7 m
- To
- 213.9 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 212.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:212.7-213.9
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.08 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.5 g/t·m is below.
Negative factors
- 2.08 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.08”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 19.9Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 19.9
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 212.7 m
- To
- 213.9 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 212.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:212.7-213.9
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 19.9 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 23.9 g/t·m is below.
Negative factors
- 19.9 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“19.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 923Grade Unit: ppmIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 923
- Grade Unit
- ppm
- Intercept
- 1.2 m
- From
- 212.7 m
- To
- 213.9 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 212.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:212.7-213.9
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 923 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“923”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 1.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 318.5 m
- To
- 320 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 318.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:318.5-320
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.5 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.3 g/t·m is below.
Negative factors
- 1.5 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 60.3Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 60.3
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 318.5 m
- To
- 320 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 318.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:318.5-320
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 60.3 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 90.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“60.3”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 30563Grade Unit: ppmIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 30563
- Grade Unit
- ppm
- Intercept
- 1.5 m
- From
- 318.5 m
- To
- 320 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 318.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:318.5-320
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 30563 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“30,563”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 4.45Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 4.45
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 319.2 m
- To
- 319.6 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 319.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:319.2-319.6
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.45 g/t gold is moderate against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.8 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.45”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 218Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 218
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 319.2 m
- To
- 319.6 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 319.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:319.2-319.6
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 218 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 87.2 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 218 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“218”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 111000Grade Unit: ppmIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 111000
- Grade Unit
- ppm
- Intercept
- 0.4 m
- From
- 319.2 m
- To
- 319.6 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 319.2 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:319.2-319.6
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 111000 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“111,000”
Context: including
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 1.79Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 157.8 m
- To
- 158.1 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 157.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:157.8-158.1
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.79 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 1.79 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.79”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 42.4Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 42.4
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 157.8 m
- To
- 158.1 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 157.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:157.8-158.1
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 42.4 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 12.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“42.4”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 29500Grade Unit: ppmIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 29500
- Grade Unit
- ppm
- Intercept
- 0.3 m
- From
- 157.8 m
- To
- 158.1 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 157.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:157.8-158.1
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 29500 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“29,500”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 0.1Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 217.7 m
- To
- 222.1 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 217.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:217.7-222.1
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.1 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 2.4Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 2.4
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 217.7 m
- To
- 222.1 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 217.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:217.7-222.1
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 10.6 g/t·m is below.
Negative factors
- 2.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.4”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 1559Grade Unit: ppmIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 1559
- Grade Unit
- ppm
- Intercept
- 4.4 m
- From
- 217.7 m
- To
- 222.1 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 217.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:217.7-222.1
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 1559 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“1,559”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · goldGrade: 0.97Grade Unit: g/tIntercept: 0.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 0.97
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 294.6 m
- To
- 295 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 294.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:294.6-295
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.97 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.97 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.97”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · silverGrade: 20.6Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 20.6
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 294.6 m
- To
- 295 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 294.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:294.6-295
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table. 20.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.2 g/t·m is below.
Negative factors
- 20.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
andGold Ridge · copperGrade: 9640Grade Unit: ppmIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Gold Ridge
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONAU
Geometry
- Grade
- 9640
- Grade Unit
- ppm
- Intercept
- 0.4 m
- From
- 294.6 m
- To
- 295 m
- Hole Depth
- 0.4 m
- Intercept Depth
- 294.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- and:294.6-295
- Mining Method
- underground
QA/QC
- Laboratory
- Activation Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-19T00:00:00.000Z
Reasoning: Expanded from assay table: 9640 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“9,640”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Drill hole GR-25-012 identified a massive sulphide zone at a vertical depth of only 225 m from surface in the West Disco"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.