Onyx Gold Expands Argus Main Zone with 1.0 g/t Gold Over 59.7 Meters Advancing Near-Surface Bulk Tonnage Growth at Munro-Croesus Project
Original announcement by tmx on
- Company
- Onyx Gold Corp.
- Ticker
- ONYX
- Exchange
- TSX
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-18 15:06:17 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Onyx Gold announced new drill results from six holes at its Argus Main Zone, part of the Munro-Croesus Project in Ontario. The drilling confirmed broad, near-surface gold mineralization, including high-grade intercepts, and expanded the known footprint by identifying gold in metasediments for the first time. The company is well-funded for its ongoing 75,000-meter drill program, which aims to further define both bulk-tonnage and high-grade gold targets.
Reasoning: Onyx Gold announced new drill results from the Argus Main Zone at its Munro-Croesus Project, highlighting broad near-surface gold mineralization and high-grade sub-intervals. The results confirm continuity and expand the known mineralization footprint, supporting both bulk-tonnage and high-grade potential. The company is well-funded for its ongoing drill program, and QA/QC protocols are in place.
Positive factors
- Significant gold intercepts, including high-grade sub-intervals, confirming continuity and expansion potential.
- Broad near-surface mineralization at Argus Main supports bulk-tonnage potential.
- Discovery of gold in fine-grained metasediments expands the mineralization footprint.
- Company is fully funded for an extensive 75,000-meter drill program.
- QA/QC procedures are disclosed, and a Qualified Person has reviewed the technical information.
Negative factors
- True widths are estimated to be 60-90% of drilled width, not explicitly stated for each intercept.
Facts used in scoring: 60
Extracted facts
Stored fact records: 60. Some facts used in scoring do not have a stored record.
Drill Results (60)
MC25-240Munro-Croesus · goldGrade: 0.4Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- MC25-240
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 142 m
- To
- 154 m
- Hole Depth
- 450 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-240:142-154
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a moderate width, contributing to the overall mineralization but not a highlight.
Positive factors
- Intercept contributes to overall mineralization continuity.
Negative factors
- Grade is weak for gold (0.4 g/t Au).
Evidence · table
“0.4”
Context: 12.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-240Munro-Croesus · goldGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-240
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 148 m
- To
- 149 m
- Hole Depth
- 450 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-240:148-149
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade but is very narrow, limiting its individual significance.
Negative factors
- Narrow intercept length (1.0 m).
Evidence · table
“1.1”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-240Munro-Croesus · goldGrade: 1.2Grade Unit: g/tIntercept: 1.3 mView all detailsHide details
Identity
- Hole ID
- MC25-240
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 1.3 m
- From
- 165.5 m
- To
- 166.8 m
- Hole Depth
- 450 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-240:165.5-166.8
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade but is very narrow, limiting its individual significance.
Negative factors
- Narrow intercept length (1.3 m).
Evidence · table
“1.2”
Context: 1.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-240Munro-Croesus · goldGrade: 1.2Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- MC25-240
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 262.2 m
- To
- 264.2 m
- Hole Depth
- 450 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-240:262.2-264.2
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade but is narrow, limiting its individual significance.
Negative factors
- Narrow intercept length (2.0 m).
Evidence · table
“1.2”
Context: 2.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-240Munro-Croesus · goldGrade: 0.8Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- MC25-240
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 281 m
- To
- 282.2 m
- Hole Depth
- 450 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-240:281-282.2
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a very narrow width, contributing minimally to overall significance.
Negative factors
- Grade is weak for gold (0.8 g/t Au) and intercept is very narrow.
Evidence · table
“0.8”
Context: 1.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-240Munro-Croesus · goldGrade: 1Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- MC25-240
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 356.3 m
- To
- 364 m
- Hole Depth
- 450 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-240:356.3-364
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a moderate width, contributing to the overall mineralization.
Evidence · table
“1.0”
Context: 7.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-240Munro-Croesus · goldGrade: 1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MC25-240
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 425 m
- To
- 426.5 m
- Hole Depth
- 450 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-240:425-426.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade but is narrow, limiting its individual significance.
Negative factors
- Narrow intercept length (1.5 m).
Evidence · table
“1.0”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 0.8Grade Unit: g/tIntercept: 47 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 47 m
- From
- 100 m
- To
- 147 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:100-147
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a strong width, contributing significantly to the bulk-tonnage potential of the zone.
Positive factors
- Strong intercept length (47.0 m) supports bulk-tonnage potential.
- Grade is moderate for gold (0.8 g/t Au).
Evidence · table
“0.8”
Context: 47.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 1.7Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 119 m
- To
- 136 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:119-136
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (1.7 g/t Au) within an open-pit scenario.
- Moderate intercept length (17.0 m).
Evidence · table
“1.7”
Context: 17.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 2.5Grade Unit: g/tIntercept: 7.8 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 7.8 m
- From
- 124.2 m
- To
- 132 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:124.2-132
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, further enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.5 g/t Au) within an open-pit scenario.
- Moderate intercept length (7.8 m).
Evidence · table
“2.5”
Context: 7.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 0.9Grade Unit: g/tIntercept: 16.6 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 16.6 m
- From
- 190 m
- To
- 206.6 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:190-206.6
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, contributing to the overall mineralization.
Positive factors
- Grade is moderate for gold (0.9 g/t Au) within an open-pit scenario.
- Moderate intercept length (16.6 m).
Evidence · table
“0.9”
Context: 16.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 1.5Grade Unit: g/tIntercept: 7.6 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 7.6 m
- From
- 199 m
- To
- 206.6 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:199-206.6
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (1.5 g/t Au) within an open-pit scenario.
- Moderate intercept length (7.6 m).
Evidence · table
“1.5”
Context: 7.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 3.1Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 3.1
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 204 m
- To
- 206.6 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:204-206.6
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is exceptional for gold (3.1 g/t Au) within an open-pit scenario.
- Narrow intercept length (2.6 m).
Evidence · table
“3.1”
Context: 2.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 4.3Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 4.3
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 205 m
- To
- 206.6 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:205-206.6
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is exceptional for gold (4.3 g/t Au) within an open-pit scenario.
- Narrow intercept length (1.6 m).
Evidence · table
“4.3”
Context: 1.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 1.2Grade Unit: g/tIntercept: 7.8 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 7.8 m
- From
- 224.2 m
- To
- 232 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:224.2-232
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, contributing to the overall mineralization.
Positive factors
- Grade is moderate for gold (1.2 g/t Au) within an open-pit scenario.
- Moderate intercept length (7.8 m).
Evidence · table
“1.2”
Context: 7.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-245Munro-Croesus · goldGrade: 1.8Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- MC25-245
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 224.2 m
- To
- 227 m
- Hole Depth
- 357 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-245:224.2-227
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 330 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (1.8 g/t Au) within an open-pit scenario.
- Narrow intercept length (2.8 m).
Evidence · table
“1.8”
Context: 2.8
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 1.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 97 m
- To
- 98 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:97-98
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade but is very narrow, limiting its individual significance.
Positive factors
- Grade is strong for gold (1.5 g/t Au) within an open-pit scenario.
Negative factors
- Very narrow intercept length (1.0 m).
Evidence · table
“1.5”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 0.7Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 148 m
- To
- 154.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:148-154.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width, contributing to the overall mineralization but not a highlight.
Negative factors
- Grade is weak for gold (0.7 g/t Au).
Evidence · table
“0.7”
Context: 6.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 2.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 150 m
- To
- 151 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:150-151
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade but is very narrow, limiting its individual significance.
Positive factors
- Grade is strong for gold (2.1 g/t Au) within an open-pit scenario.
Negative factors
- Very narrow intercept length (1.0 m).
Evidence · table
“2.1”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 0.8Grade Unit: g/tIntercept: 73.1 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 73.1 m
- From
- 188.9 m
- To
- 262 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:188.9-262
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over an exceptional width, significantly contributing to the bulk-tonnage potential of the zone.
Positive factors
- Exceptional intercept length (73.1 m) supports bulk-tonnage potential.
- Grade is moderate for gold (0.8 g/t Au) within an open-pit scenario.
Evidence · table
“0.8”
Context: 73.1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 2.4Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.4
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 191 m
- To
- 196 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:191-196
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.4 g/t Au) within an open-pit scenario.
- Moderate intercept length (5.0 m).
Evidence · table
“2.4”
Context: 5.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 2.1Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 11.5 m
- From
- 211.9 m
- To
- 223.4 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:211.9-223.4
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.1 g/t Au) within an open-pit scenario.
- Moderate intercept length (11.5 m).
Evidence · table
“2.1”
Context: 11.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 2.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 231 m
- To
- 232 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:231-232
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade but is very narrow, limiting its individual significance.
Positive factors
- Grade is exceptional for gold (2.6 g/t Au) within an open-pit scenario.
Negative factors
- Very narrow intercept length (1.0 m).
Evidence · table
“2.6”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 1.4Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 241 m
- To
- 249 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:241-249
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a moderate width, contributing to the overall mineralization.
Positive factors
- Grade is moderate for gold (1.4 g/t Au) within an open-pit scenario.
- Moderate intercept length (8.0 m).
Evidence · table
“1.4”
Context: 8.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 0.8Grade Unit: g/tIntercept: 8.5 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 8.5 m
- From
- 280.5 m
- To
- 289 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:280.5-289
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a moderate width, contributing to the overall mineralization but not a highlight.
Positive factors
- Moderate intercept length (8.5 m).
Negative factors
- Grade is weak for gold (0.8 g/t Au).
Evidence · table
“0.8”
Context: 8.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 280.5 m
- To
- 281.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:280.5-281.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a very narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is exceptional for gold (5.0 g/t Au) within an open-pit scenario.
Negative factors
- Very narrow intercept length (1.0 m).
Evidence · table
“5.0”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 0.6Grade Unit: g/tIntercept: 8.5 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 8.5 m
- From
- 305.5 m
- To
- 314 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:305.5-314
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a moderate width, contributing to the overall mineralization but not a highlight.
Positive factors
- Moderate intercept length (8.5 m).
Negative factors
- Grade is weak for gold (0.6 g/t Au).
Evidence · table
“0.6”
Context: 8.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 312 m
- To
- 313 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:312-313
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a very narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is exceptional for gold (3.0 g/t Au) within an open-pit scenario.
Negative factors
- Very narrow intercept length (1.0 m).
Evidence · table
“3.0”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 0.5Grade Unit: g/tIntercept: 50.5 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 50.5 m
- From
- 327.5 m
- To
- 378 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:327.5-378
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over an exceptional width, significantly contributing to the bulk-tonnage potential of the zone.
Positive factors
- Exceptional intercept length (50.5 m) supports bulk-tonnage potential.
- Grade is moderate for gold (0.5 g/t Au) within an open-pit scenario.
Evidence · table
“0.5”
Context: 50.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 0.7Grade Unit: g/tIntercept: 31 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 31 m
- From
- 334 m
- To
- 365 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:334-365
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a strong width, contributing to the bulk-tonnage potential.
Positive factors
- Strong intercept length (31.0 m) supports bulk-tonnage potential.
Negative factors
- Grade is weak for gold (0.7 g/t Au).
Evidence · table
“0.7”
Context: 31.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 1.7Grade Unit: g/tIntercept: 8.2 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 8.2 m
- From
- 356.8 m
- To
- 365 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:356.8-365
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (1.7 g/t Au) within an open-pit scenario.
- Moderate intercept length (8.2 m).
Evidence · table
“1.7”
Context: 8.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 2.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 358 m
- To
- 361 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:358-361
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is exceptional for gold (2.7 g/t Au) within an open-pit scenario.
- Narrow intercept length (3.0 m).
Evidence · table
“2.7”
Context: 3.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 0.3Grade Unit: g/tIntercept: 50 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 50 m
- From
- 405 m
- To
- 455 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:405-455
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over an exceptional width, contributing to the bulk-tonnage potential.
Positive factors
- Exceptional intercept length (50.0 m) supports bulk-tonnage potential.
Negative factors
- Grade is weak for gold (0.3 g/t Au).
Evidence · table
“0.3”
Context: 50.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-247Munro-Croesus · goldGrade: 1.1Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- MC25-247
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 433 m
- To
- 439 m
- Hole Depth
- 456 m
- Intercept Depth
- 97 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-247:433-439
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 325 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a moderate width, contributing to the overall mineralization.
Positive factors
- Grade is moderate for gold (1.1 g/t Au) within an open-pit scenario.
- Moderate intercept length (6.0 m).
Evidence · table
“1.1”
Context: 6.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 0.2Grade Unit: g/tIntercept: 33.9 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 33.9 m
- From
- 197 m
- To
- 230.9 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:197-230.9
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a strong width, contributing to the overall mineralization but at a low grade.
Positive factors
- Strong intercept length (33.9 m).
Negative factors
- Grade is weak for gold (0.2 g/t Au).
Evidence · table
“0.2”
Context: 33.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 0.4Grade Unit: g/tIntercept: 5.9 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 5.9 m
- From
- 225 m
- To
- 230.9 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:225-230.9
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a moderate width, contributing to the overall mineralization but at a low grade.
Negative factors
- Grade is weak for gold (0.4 g/t Au).
Evidence · table
“0.4”
Context: 5.9
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 0.5Grade Unit: g/tIntercept: 29.5 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 29.5 m
- From
- 252 m
- To
- 281.5 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:252-281.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a strong width, contributing significantly to the bulk-tonnage potential of the zone.
Positive factors
- Strong intercept length (29.5 m) supports bulk-tonnage potential.
- Grade is moderate for gold (0.5 g/t Au) within an open-pit scenario.
Evidence · table
“0.5”
Context: 29.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 1Grade Unit: g/tIntercept: 12.5 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 12.5 m
- From
- 269 m
- To
- 281.5 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:269-281.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is moderate for gold (1.0 g/t Au) within an open-pit scenario.
- Moderate intercept length (12.5 m).
Evidence · table
“1.0”
Context: 12.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 2.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 278.5 m
- To
- 281.5 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:278.5-281.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.5 g/t Au) within an open-pit scenario.
- Narrow intercept length (3.0 m).
Evidence · table
“2.5”
Context: 3.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 0.3Grade Unit: g/tIntercept: 37.5 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 37.5 m
- From
- 338 m
- To
- 375.5 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:338-375.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a strong width, contributing to the bulk-tonnage potential but at a low grade.
Positive factors
- Strong intercept length (37.5 m) supports bulk-tonnage potential.
Negative factors
- Grade is weak for gold (0.3 g/t Au).
Evidence · table
“0.3”
Context: 37.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 0.8Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 342 m
- To
- 349 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:342-349
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a moderate width, contributing to the overall mineralization but not a highlight.
Positive factors
- Moderate intercept length (7.0 m).
Negative factors
- Grade is weak for gold (0.8 g/t Au).
Evidence · table
“0.8”
Context: 7.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 0.4Grade Unit: g/tIntercept: 26.5 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 26.5 m
- From
- 431.5 m
- To
- 458 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:431.5-458
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a strong width, contributing to the bulk-tonnage potential but at a low grade.
Positive factors
- Strong intercept length (26.5 m) supports bulk-tonnage potential.
Negative factors
- Grade is weak for gold (0.4 g/t Au).
Evidence · table
“0.4”
Context: 26.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 0.6Grade Unit: g/tIntercept: 11.5 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.6
- Grade Unit
- g/t
- Intercept
- 11.5 m
- From
- 446.5 m
- To
- 458 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:446.5-458
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a weak gold grade over a moderate width, contributing to the overall mineralization but not a highlight.
Positive factors
- Moderate intercept length (11.5 m).
Negative factors
- Grade is weak for gold (0.6 g/t Au).
Evidence · table
“0.6”
Context: 11.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 2Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 456.5 m
- To
- 458 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:456.5-458
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a very narrow width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.0 g/t Au) within an open-pit scenario.
Negative factors
- Very narrow intercept length (1.5 m).
Evidence · table
“2.0”
Context: 1.5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-250Munro-Croesus · goldGrade: 1.7Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- MC25-250
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 489.5 m
- To
- 492.5 m
- Hole Depth
- 537 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-250:489.5-492.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 315 °
- Dip
- -45 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a very narrow width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (1.7 g/t Au) within an open-pit scenario.
Negative factors
- Very narrow intercept length (1.4 m).
Evidence · table
“1.7”
Context: 1.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 0.7Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 203 m
- To
- 204 m
- Hole Depth
- 558 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:203-204
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a very narrow width, contributing minimally to overall significance.
Negative factors
- Grade is weak for gold (0.7 g/t Au) and intercept is very narrow.
Evidence · table
“0.7”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 213.5 m
- To
- 214.5 m
- Hole Depth
- 558 m
- Intercept Depth
- 203 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:213.5-214.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade but is very narrow, limiting its individual significance.
Negative factors
- Narrow intercept length (1.0 m).
Evidence · table
“1.1”
Context: 1.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 1Grade Unit: g/tIntercept: 59.7 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 59.7 m
- From
- 227.8 m
- To
- 287.5 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:227.8-287.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over an exceptional width, significantly contributing to the bulk-tonnage potential of the zone.
Positive factors
- Exceptional intercept length (59.7 m) supports bulk-tonnage potential.
- Grade is moderate for gold (1.0 g/t Au) within an open-pit scenario.
Evidence · table
“1.0”
Context: 59.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 1.4Grade Unit: g/tIntercept: 41.4 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 41.4 m
- From
- 237 m
- To
- 278.4 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:237-278.4
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a moderate gold grade over an exceptional width, significantly contributing to the bulk-tonnage potential.
Positive factors
- Exceptional intercept length (41.4 m) supports bulk-tonnage potential.
- Grade is moderate for gold (1.4 g/t Au) within an open-pit scenario.
Evidence · table
“1.4”
Context: 41.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 2.5Grade Unit: g/tIntercept: 6.2 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 6.2 m
- From
- 237 m
- To
- 243.2 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:237-243.2
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.5 g/t Au) within an open-pit scenario.
- Moderate intercept length (6.2 m).
Evidence · table
“2.5”
Context: 6.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 2Grade Unit: g/tIntercept: 18.4 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 18.4 m
- From
- 260 m
- To
- 278.4 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:260-278.4
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a strong width, significantly enhancing the overall intercept.
Positive factors
- Strong intercept length (18.4 m) supports bulk-tonnage potential.
- Grade is strong for gold (2.0 g/t Au) within an open-pit scenario.
Evidence · table
“2.0”
Context: 18.4
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 3.9Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 3.9
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 260 m
- To
- 263.2 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:260-263.2
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is exceptional for gold (3.9 g/t Au) within an open-pit scenario.
- Narrow intercept length (3.2 m).
Evidence · table
“3.9”
Context: 3.2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 2.9Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 273 m
- To
- 277 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:273-277
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a narrow width, significantly enhancing the overall intercept.
Positive factors
- Grade is exceptional for gold (2.9 g/t Au) within an open-pit scenario.
- Narrow intercept length (4.0 m).
Evidence · table
“2.9”
Context: 4.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 6Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 6
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 344 m
- To
- 346.5 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:344-346.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade over a narrow width, representing a high-grade zone.
Positive factors
- Grade is exceptional for gold (6.0 g/t Au) within an open-pit scenario.
- Narrow intercept length (2.5 m).
Evidence · table
“6.0”
Context: 2.5
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 6.0 g/t Au exceeds the 5 g/t exceptional threshold for gold.
Evidence · table
“6.0”
Context: 2.5
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 9.5Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 9.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 345 m
- To
- 346.5 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:345-346.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade over a narrow width, representing a very high-grade zone.
Positive factors
- Grade is exceptional for gold (9.5 g/t Au) within an open-pit scenario.
- Narrow intercept length (1.5 m).
Evidence · table
“9.5”
Context: 1.5
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: 9.5 g/t Au exceeds the 5 g/t exceptional threshold for gold.
Evidence · table
“9.5”
Context: 1.5
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 1Grade Unit: g/tIntercept: 13.3 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 13.3 m
- From
- 467.8 m
- To
- 481.1 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:467.8-481.1
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, contributing to the overall mineralization.
Positive factors
- Grade is moderate for gold (1.0 g/t Au) within an open-pit scenario.
- Moderate intercept length (13.3 m).
Evidence · table
“1.0”
Context: 13.3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-255Munro-Croesus · goldGrade: 2.3Grade Unit: g/tIntercept: 4.7 mView all detailsHide details
Identity
- Hole ID
- MC25-255
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.3
- Grade Unit
- g/t
- Intercept
- 4.7 m
- From
- 467.8 m
- To
- 472.5 m
- Hole Depth
- 558 m
- Intercept Depth
- 227.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-255:467.8-472.5
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -53 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.3 g/t Au) within an open-pit scenario.
- Moderate intercept length (4.7 m).
Evidence · table
“2.3”
Context: 4.7
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-258Munro-Croesus · goldGrade: 0.7Grade Unit: g/tIntercept: 25.6 mView all detailsHide details
Identity
- Hole ID
- MC25-258
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 25.6 m
- From
- 247 m
- To
- 272.6 m
- Hole Depth
- 339 m
- Intercept Depth
- 247 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-258:247-272.6
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -57 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a strong width, contributing to the bulk-tonnage potential but at a low grade.
Positive factors
- Strong intercept length (25.6 m) supports bulk-tonnage potential.
Negative factors
- Grade is weak for gold (0.7 g/t Au).
Evidence · table
“0.7”
Context: 25.6
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-258Munro-Croesus · goldGrade: 2Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- MC25-258
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 256 m
- To
- 263 m
- Hole Depth
- 339 m
- Intercept Depth
- 247 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-258:256-263
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -57 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.0 g/t Au) within an open-pit scenario.
- Moderate intercept length (7.0 m).
Evidence · table
“2.0”
Context: 7.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
MC25-258Munro-Croesus · goldGrade: 2.5Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- MC25-258
- Project
- Munro-Croesus
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- ONYX
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 258 m
- To
- 263 m
- Hole Depth
- 339 m
- Intercept Depth
- 247 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- MC25-258:258-263
- Mining Method
- mixed
Location
- Location
- Argus Main Zone
- Azimuth
- 323 °
- Dip
- -57 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-18T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade over a moderate width, enhancing the overall intercept.
Positive factors
- Grade is strong for gold (2.5 g/t Au) within an open-pit scenario.
- Moderate intercept length (5.0 m).
Evidence · table
“2.5”
Context: 5.0
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width.
Evidence · text
“*Intersections are reported as drilled widths; true widths are estimated to be 60-90% of drilled width”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release mentions ALS Geochemistry as the lab, ISO/IEC 17025:2017 and ISO 9001:2015 certification, and QA/QC methods including duplicates, blanks, and standards, with QP sign-off.
Evidence · text
“ALS Geochemistry operates meeting all requirements of International Standards ISO/IEC 17025:2017 and ISO 9001:2015”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Complementing Munro-Croesus are two large, early-stage projects - Golden Mile, a 140 km² property situated just 9 km fro"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.