# OUTCROP SILVER EXTENDS AGUILAR VEIN 450 METRES SOUTH AND IDENTIFIES POTENTIAL NEW HIGH-GRADE SHOOTS IN BLIND TARGETS Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653 Original source: https://money.tmx.com/en/quote/OCG/news/4827569516642655/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne Publisher: tmx Original announcement: 2025-11-26T14:23:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Outcrop Silver & Gold Corporation - Ticker: OCG - Exchange: TSX - Region: Colombia - Primary commodity: Silver - Secondary commodities: Gold - Document categories: Drill results, Resource update - Extracted: 2026-09-16 15:14:56 UTC Narrative sentiment: 0.80 · Bullish ## Minestarters Atlas summary Outcrop Silver announced new drill results from its Santa Ana project in Colombia, extending the Aguilar vein system by 450 metres to the south and identifying new high-grade shoots in blind targets. Key intercepts include 0.45 metres grading 3,080 g/t AgEq in DH535 and 0.74 metres grading 1,084 g/t AgEq in DH524. The company continues drilling with three rigs in preparation for a Q1 2026 mineral resource update, with these results significantly expanding the known footprint and reinforcing the project's scalability. Reasoning: The drill results demonstrate a significant step-out extension of the high-grade Aguilar vein system, with several bonanza-grade intercepts in previously blind targets, substantially expanding the known mineralized footprint and supporting future resource growth. The company also provided detailed QA/QC and QP sign-off, enhancing confidence in the results, though the lack of true width estimates for step-out holes is a minor drawback. - Positive factor: Significant extension of the Aguilar vein system by 450 metres to the south in blind targets, indicating strong exploration potential. - Positive factor: Multiple high-grade silver and gold intercepts, including bonanza grades, well above project and peer averages. - Positive factor: Confirmation of continuity beneath younger cover and identification of potential new high-grade shoots. - Positive factor: Comprehensive QA/QC procedures disclosed and a Qualified Person has signed off on the technical information. - Negative factor: True width of intercepts could not be estimated for the step-out holes, which may overstate actual thickness. Low confidence — this extraction should be reviewed alongside the original source. Facts used in scoring: 39 ## Classification and evidence No classification tags are available. ## Extracted facts Stored fact records: 39. Some facts used in scoring do not have a stored record. ## Drill Results (39) ### DH508 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-0) Santa Ana · silver #### Identity - Hole ID: DH508 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 118 - Grade Unit: g/t - Intercept: 1.12 m - From: 72.53 m - To: 73.65 m - Hole Depth: 110.33 m - Intercept Depth: 72.53 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH508:72.53-73.65 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -63 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 166 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 118 g/t Ag over 1.12m is a good result, contributing to the overall extension of the vein system, though not as high-grade as other intercepts in the release. It is above the peer average of 86.788 g/t Ag. - Positive factor: Solid silver grade for the intercept. - Positive factor: Part of a significant step-out drilling program. - Negative factor: True width not estimated for step-out holes. Evidence · table > 118 Context: 1.12 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH508 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-1) Santa Ana · gold #### Identity - Hole ID: DH508 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 0.54 - Grade Unit: g/t - Intercept: 1.12 m - From: 72.53 m - To: 73.65 m - Hole Depth: 110.33 m - Intercept Depth: 72.53 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH508:72.53-73.65 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -63 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 166 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 0.54 g/t over 1.12m is below the project's average gold grade, but still contributes to the overall AgEq value and confirms polymetallic mineralization in the step-out area. - Positive factor: Contributes to the overall polymetallic nature of the intercept. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 0.54 Context: 1.12 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH508 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-2) Santa Ana · silver #### Identity - Hole ID: DH508 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 315 - Grade Unit: g/t - Intercept: 0.35 m - From: 73.3 m - To: 73.65 m - Hole Depth: 110.33 m - Intercept Depth: 72.53 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH508:73.3-73.65 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -63 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 400 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 315 g/t Ag over 0.35m is a strong high-grade intercept, well above the peer average of 86.788 g/t Ag, and contributes positively to the overall prospectivity of the extended vein. - Positive factor: High-grade silver intercept, significantly above peer average. - Positive factor: Confirms high-grade mineralization within the broader interval. - Negative factor: True width not estimated for step-out holes. Evidence · table > 315 Context: 0.35 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH508 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-3) Santa Ana · gold #### Identity - Hole ID: DH508 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 0.97 - Grade Unit: g/t - Intercept: 0.35 m - From: 73.3 m - To: 73.65 m - Hole Depth: 110.33 m - Intercept Depth: 72.53 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH508:73.3-73.65 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -63 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 400 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 0.97 g/t over 0.35m, while below the project average, enhances the overall AgEq grade for this high-grade sub-interval. - Positive factor: Contributes to the high AgEq value of the included interval. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 0.97 Context: 0.35 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-4) Santa Ana · silver #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 198 - Grade Unit: g/t - Intercept: 1.04 m - From: 91.22 m - To: 92.26 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:91.22-92.26 - Mining Method: underground #### Location - Location: Aguilar Splay - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 342 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 198 g/t Ag over 1.04m is a good result, confirming high-grade mineralization in a splay structure and contributing to the overall extension of the vein system. It is above the peer average of 86.788 g/t Ag. - Positive factor: Strong silver grade, well above peer average. - Positive factor: Indicates mineralization in an Aguilar Splay structure. - Negative factor: True width not estimated for step-out holes. Evidence · table > 198 Context: 1.04 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-5) Santa Ana · gold #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 1.63 - Grade Unit: g/t - Intercept: 1.04 m - From: 91.22 m - To: 92.26 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:91.22-92.26 - Mining Method: underground #### Location - Location: Aguilar Splay - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 342 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 1.63 g/t over 1.04m, while below the project average, adds to the AgEq value and confirms polymetallic mineralization in the splay structure. - Positive factor: Contributes to the overall polymetallic nature of the intercept. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 1.63 Context: 1.04 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-6) Santa Ana · silver #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 411 - Grade Unit: g/t - Intercept: 0.44 m - From: 91.22 m - To: 91.66 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:91.22-91.66 - Mining Method: underground #### Location - Location: Aguilar Splay - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 718 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 411 g/t Ag over 0.44m is a very strong high-grade intercept, well above the peer average of 86.788 g/t Ag, and contributes positively to the overall prospectivity of the extended vein. - Positive factor: Very high-grade silver intercept, significantly above peer average. - Positive factor: Confirms high-grade mineralization within the broader interval. - Negative factor: True width not estimated for step-out holes. Evidence · table > 411 Context: 0.44 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-7) Santa Ana · gold #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 3.49 - Grade Unit: g/t - Intercept: 0.44 m - From: 91.22 m - To: 91.66 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:91.22-91.66 - Mining Method: underground #### Location - Location: Aguilar Splay - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 718 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 3.49 g/t over 0.44m is a good result, though below the project average, and significantly boosts the AgEq grade for this high-grade sub-interval in the splay structure. - Positive factor: Good gold grade, contributing significantly to the AgEq value. - Positive factor: Confirms polymetallic nature of the mineralization. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 3.49 Context: 0.44 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-8) Santa Ana · silver #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 363 - Grade Unit: g/t - Intercept: 0.71 m - From: 98.47 m - To: 99.18 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:98.47-99.18 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 558 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This intercept of 363 g/t Ag over 0.71m is a very strong high-grade result, well above the peer average of 86.788 g/t Ag, and reinforces the high-grade potential of the Aguilar vein. - Positive factor: Very high-grade silver intercept, significantly above peer average. - Positive factor: Confirms high-grade mineralization in the Aguilar vein. - Negative factor: True width not estimated for step-out holes. Evidence · table > 363 Context: 0.71 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-9) Santa Ana · gold #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 2.21 - Grade Unit: g/t - Intercept: 0.71 m - From: 98.47 m - To: 99.18 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:98.47-99.18 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 558 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 2.21 g/t over 0.71m is a good result, though below the project average, and significantly boosts the AgEq grade for this interval in the Aguilar vein. - Positive factor: Good gold grade, contributing significantly to the AgEq value. - Positive factor: Confirms polymetallic nature of the mineralization. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 2.21 Context: 0.71 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-10) Santa Ana · silver #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 685 - Grade Unit: g/t - Intercept: 0.37 m - From: 98.47 m - To: 98.84 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:98.47-98.84 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1049 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 685 g/t Ag over 0.37m is a bonanza-grade intercept, well above the peer average of 86.788 g/t Ag, and strongly supports the high-grade potential of the Aguilar vein. - Positive factor: Bonanza-grade silver intercept, significantly above peer average and project average. - Positive factor: Confirms high-grade mineralization within the broader interval. - Negative factor: True width not estimated for step-out holes. Evidence · table > 685 Context: 0.37 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The silver grade of 685 g/t over 0.37m is exceptionally high, well above the deposit-type norm of 86.788 g/t Ag. Evidence · table > 685 Context: 0.37 **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH509 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-11) Santa Ana · gold #### Identity - Hole ID: DH509 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 4.12 - Grade Unit: g/t - Intercept: 0.37 m - From: 98.47 m - To: 98.84 m - Hole Depth: 115.85 m - Intercept Depth: 91.22 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH509:98.47-98.84 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503593.713 - Northing: 561039.824 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1033.4 m - Azimuth: 153 ° - Dip: -86 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1049 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 4.12 g/t over 0.37m is a strong result, though below the project average, and significantly boosts the AgEq grade for this bonanza-grade sub-interval in the Aguilar vein. - Positive factor: Strong gold grade, contributing significantly to the bonanza AgEq value. - Positive factor: Confirms polymetallic nature of the mineralization. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 4.12 Context: 0.37 #### Tags used in scoring **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH514 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-12) Santa Ana · silver #### Identity - Hole ID: DH514 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 197 - Grade Unit: g/t - Intercept: 0.77 m - From: 83.19 m - To: 83.96 m - Intercept Depth: 83.19 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH514:83.19-83.96 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503311.004 - Northing: 560821.696 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.53 m - Azimuth: 89 ° - Dip: -47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 439 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 197 g/t Ag over 0.77m is a good result, significantly above the peer average of 86.788 g/t Ag, and is important as it's part of the 450m step-out extension. - Positive factor: Strong silver grade, well above peer average. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: True width not estimated for step-out holes. Evidence · table > 197 Context: 0.77 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH514 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH514 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-13) Santa Ana · gold #### Identity - Hole ID: DH514 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 2.74 - Grade Unit: g/t - Intercept: 0.77 m - From: 83.19 m - To: 83.96 m - Intercept Depth: 83.19 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH514:83.19-83.96 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503311.004 - Northing: 560821.696 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.53 m - Azimuth: 89 ° - Dip: -47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 439 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 2.74 g/t over 0.77m, while below the project average, adds to the AgEq value and is important as part of the 450m step-out extension. - Positive factor: Good gold grade, contributing significantly to the AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 2.74 Context: 0.77 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH514 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH514 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-14) Santa Ana · silver #### Identity - Hole ID: DH514 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 360 - Grade Unit: g/t - Intercept: 0.39 m - From: 83.19 m - To: 83.58 m - Intercept Depth: 83.19 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH514:83.19-83.58 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503311.004 - Northing: 560821.696 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.53 m - Azimuth: 89 ° - Dip: -47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 811 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 360 g/t Ag over 0.39m is a very strong high-grade intercept, well above the peer average of 86.788 g/t Ag, and is a key part of the 450m step-out extension. - Positive factor: Very high-grade silver intercept, significantly above peer average. - Positive factor: Confirms high-grade mineralization within the broader interval as part of a significant step-out. - Negative factor: True width not estimated for step-out holes. Evidence · table > 360 Context: 0.39 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH514 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH514 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-15) Santa Ana · gold #### Identity - Hole ID: DH514 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 5.11 - Grade Unit: g/t - Intercept: 0.39 m - From: 83.19 m - To: 83.58 m - Intercept Depth: 83.19 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH514:83.19-83.58 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503311.004 - Northing: 560821.696 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.53 m - Azimuth: 89 ° - Dip: -47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 811 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 5.11 g/t over 0.39m is a strong result, though below the project average, and significantly boosts the AgEq grade for this high-grade sub-interval in the 450m step-out extension. - Positive factor: Strong gold grade, contributing significantly to the high AgEq value. - Positive factor: Confirms polymetallic nature of the mineralization as part of a significant step-out. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 5.11 Context: 0.39 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH514 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH514 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-16) Santa Ana · silver #### Identity - Hole ID: DH514 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 455 - Grade Unit: g/t - Intercept: 0.31 m - From: 87.45 m - To: 87.76 m - Intercept Depth: 83.19 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH514:87.45-87.76 - Mining Method: underground #### Location - Location: Aguilar Splay - Easting: 503311.004 - Northing: 560821.696 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.53 m - Azimuth: 89 ° - Dip: -47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 613 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This intercept of 455 g/t Ag over 0.31m is a very strong high-grade result, well above the peer average of 86.788 g/t Ag, and is important as part of the 450m step-out extension in a splay structure. - Positive factor: Very high-grade silver intercept, significantly above peer average. - Positive factor: Indicates mineralization in an Aguilar Splay structure as part of a significant step-out. - Negative factor: True width not estimated for step-out holes. Evidence · table > 455 Context: 0.31 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH514 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH514 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-17) Santa Ana · gold #### Identity - Hole ID: DH514 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 1.79 - Grade Unit: g/t - Intercept: 0.31 m - From: 87.45 m - To: 87.76 m - Intercept Depth: 83.19 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH514:87.45-87.76 - Mining Method: underground #### Location - Location: Aguilar Splay - Easting: 503311.004 - Northing: 560821.696 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.53 m - Azimuth: 89 ° - Dip: -47 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 613 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 1.79 g/t over 0.31m, while below the project average, adds to the AgEq value and is important as part of the 450m step-out extension in a splay structure. - Positive factor: Contributes to the AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 1.79 Context: 0.31 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH514 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH517 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-18) Santa Ana · silver #### Identity - Hole ID: DH517 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 94 - Grade Unit: g/t - Intercept: 0.63 m - From: 95.05 m - To: 95.68 m - Intercept Depth: 95.05 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH517:95.05-95.68 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503311.481 - Northing: 560821.686 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.48 m - Azimuth: 89 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 162 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 94 g/t Ag over 0.63m is above the peer average of 86.788 g/t Ag, but the AgEq grade is only slightly above the cut-off. Its significance lies in being part of the 450m step-out extension. - Positive factor: Silver grade is above the peer average. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: True width not estimated for step-out holes. - Negative factor: AgEq grade is just above the stated cut-off of 150 g/t AgEq. Evidence · table > 94 Context: 0.63 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH517 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH517 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-19) Santa Ana · gold #### Identity - Hole ID: DH517 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 0.77 - Grade Unit: g/t - Intercept: 0.63 m - From: 95.05 m - To: 95.68 m - Intercept Depth: 95.05 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH517:95.05-95.68 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503311.481 - Northing: 560821.686 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.48 m - Azimuth: 89 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 162 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 0.77 g/t over 0.63m is below the project average, but contributes to the AgEq value and is important as part of the 450m step-out extension. - Positive factor: Contributes to the AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 0.77 Context: 0.63 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH517 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH520 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-20) Santa Ana · silver #### Identity - Hole ID: DH520 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 265 - Grade Unit: g/t - Intercept: 0.7 m - From: 158.24 m - To: 158.94 m - Intercept Depth: 158.24 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH520:158.24-158.94 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.175 - Northing: 560908.789 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.13 m - Azimuth: 141 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 330 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 265 g/t Ag over 0.70m is a good result, significantly above the peer average of 86.788 g/t Ag, and is important as it's part of the 450m step-out extension. - Positive factor: Strong silver grade, well above peer average. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: True width not estimated for step-out holes. Evidence · table > 265 Context: 0.70 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH520 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH520 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-21) Santa Ana · gold #### Identity - Hole ID: DH520 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 0.73 - Grade Unit: g/t - Intercept: 0.7 m - From: 158.24 m - To: 158.94 m - Intercept Depth: 158.24 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH520:158.24-158.94 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.175 - Northing: 560908.789 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.13 m - Azimuth: 141 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 330 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 0.73 g/t over 0.70m is below the project average, but contributes to the AgEq value and is important as part of the 450m step-out extension. - Positive factor: Contributes to the AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 0.73 Context: 0.70 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH520 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH520 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-22) Santa Ana · silver #### Identity - Hole ID: DH520 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 473 - Grade Unit: g/t - Intercept: 0.35 m - From: 158.59 m - To: 158.94 m - Intercept Depth: 158.24 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH520:158.59-158.94 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.175 - Northing: 560908.789 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.13 m - Azimuth: 141 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 574 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 473 g/t Ag over 0.35m is a very strong high-grade intercept, well above the peer average of 86.788 g/t Ag, and is a key part of the 450m step-out extension. - Positive factor: Very high-grade silver intercept, significantly above peer average. - Positive factor: Confirms high-grade mineralization within the broader interval as part of a significant step-out. - Negative factor: True width not estimated for step-out holes. Evidence · table > 473 Context: 0.35 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH520 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH520 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-23) Santa Ana · gold #### Identity - Hole ID: DH520 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 1.15 - Grade Unit: g/t - Intercept: 0.35 m - From: 158.59 m - To: 158.94 m - Intercept Depth: 158.24 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH520:158.59-158.94 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.175 - Northing: 560908.789 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.13 m - Azimuth: 141 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 574 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 1.15 g/t over 0.35m, while below the project average, adds to the AgEq value and is important as part of the 450m step-out extension. - Positive factor: Contributes to the high AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 1.15 Context: 0.35 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH520 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH524 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-24) Santa Ana · silver #### Identity - Hole ID: DH524 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 164 - Grade Unit: g/t - Intercept: 1.04 m - From: 218 m - To: 219.04 m - Intercept Depth: 218 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH524:218-219.04 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.069 - Northing: 560909.078 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.05 m - Azimuth: 141 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 779 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 164 g/t Ag over 1.04m is a good result, significantly above the peer average of 86.788 g/t Ag, and is important as it's part of the 450m step-out extension. - Positive factor: Strong silver grade, well above peer average. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: True width not estimated for step-out holes. Evidence · table > 164 Context: 1.04 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH524 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH524 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-25) Santa Ana · gold #### Identity - Hole ID: DH524 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 6.97 - Grade Unit: g/t - Intercept: 1.04 m - From: 218 m - To: 219.04 m - Intercept Depth: 218 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH524:218-219.04 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.069 - Northing: 560909.078 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.05 m - Azimuth: 141 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 779 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 6.97 g/t over 1.04m is a strong result, close to the project average, and significantly boosts the AgEq grade for this interval in the 450m step-out extension. - Positive factor: Strong gold grade, close to the project average \(7.333 g/t Au\). - Positive factor: Contributes significantly to the high AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: True width not estimated for step-out holes. Evidence · table > 6.97 Context: 1.04 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH524 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH524 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-26) Santa Ana · silver #### Identity - Hole ID: DH524 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 225 - Grade Unit: g/t - Intercept: 0.74 m - From: 218 m - To: 218.74 m - Intercept Depth: 218 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH524:218-218.74 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.069 - Northing: 560909.078 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.05 m - Azimuth: 141 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1084 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 225 g/t Ag over 0.74m is a very strong high-grade intercept, well above the peer average of 86.788 g/t Ag, and is a key part of the 450m step-out extension. - Positive factor: Very high-grade silver intercept, significantly above peer average. - Positive factor: Confirms high-grade mineralization within the broader interval as part of a significant step-out. - Negative factor: True width not estimated for step-out holes. Evidence · table > 225 Context: 0.74 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH524 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH524 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-27) Santa Ana · gold #### Identity - Hole ID: DH524 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 9.74 - Grade Unit: g/t - Intercept: 0.74 m - From: 218 m - To: 218.74 m - Intercept Depth: 218 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH524:218-218.74 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503237.069 - Northing: 560909.078 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.05 m - Azimuth: 141 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1084 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 9.74 g/t over 0.74m is a strong result, above the project average, and significantly boosts the AgEq grade for this bonanza-grade sub-interval in the 450m step-out extension. - Positive factor: Strong gold grade, above the project average \(7.333 g/t Au\). - Positive factor: Contributes significantly to the bonanza AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: True width not estimated for step-out holes. Evidence · table > 9.74 Context: 0.74 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The AgEq grade of 1,084 g/t over 0.74m is exceptionally high, well above the deposit-type norm of 86.788 g/t Ag. Evidence · table > 1,084 Context: 0.74 **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH524 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH528 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-28) Santa Ana · silver #### Identity - Hole ID: DH528 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 102 - Grade Unit: g/t - Intercept: 0.84 m - From: 263.32 m - To: 264.16 m - Intercept Depth: 263.32 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH528:263.32-264.16 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503236.914 - Northing: 560909.205 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.02 m - Azimuth: 141 ° - Dip: -83 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 270 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 102 g/t Ag over 0.84m is above the peer average of 86.788 g/t Ag, but the AgEq grade is only slightly above the cut-off. Its significance lies in being part of the 450m step-out extension. - Positive factor: Silver grade is above the peer average. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: True width not estimated for step-out holes. - Negative factor: AgEq grade is just above the stated cut-off of 150 g/t AgEq. Evidence · table > 102 Context: 0.84 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH528 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH528 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-29) Santa Ana · gold #### Identity - Hole ID: DH528 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 1.9 - Grade Unit: g/t - Intercept: 0.84 m - From: 263.32 m - To: 264.16 m - Intercept Depth: 263.32 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH528:263.32-264.16 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503236.914 - Northing: 560909.205 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1050.02 m - Azimuth: 141 ° - Dip: -83 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 270 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 1.90 g/t over 0.84m is below the project average, but contributes to the AgEq value and is important as part of the 450m step-out extension. - Positive factor: Contributes to the AgEq value. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated for step-out holes. Evidence · table > 1.90 Context: 0.84 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH528 is one of five drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH532 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-30) Santa Ana · silver #### Identity - Hole ID: DH532 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 392 - Grade Unit: g/t - Intercept: 0.96 m - From: 179.62 m - To: 180.58 m - Intercept Depth: 179.62 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH532:179.62-180.58 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503568.197 - Northing: 561155.748 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1029.6 m - Azimuth: 144 ° - Dip: -72 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 566 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 392 g/t Ag over 0.96m is a very strong high-grade result, well above the peer average of 86.788 g/t Ag, and is important for confirming the continuity of the high-grade shoot as part of the resource definition program. - Positive factor: Very high-grade silver intercept, significantly above peer average. - Positive factor: Part of the resource definition program, confirming continuity of the high-grade shoot. - Negative factor: True width not estimated. Evidence · table > 392 Context: 0.96 #### Tags used in scoring **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH532 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH532 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-31) Santa Ana · gold #### Identity - Hole ID: DH532 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 1.97 - Grade Unit: g/t - Intercept: 0.96 m - From: 179.62 m - To: 180.58 m - Intercept Depth: 179.62 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH532:179.62-180.58 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503568.197 - Northing: 561155.748 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1029.6 m - Azimuth: 144 ° - Dip: -72 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 566 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 1.97 g/t over 0.96m, while below the project average, adds to the AgEq value and is important for confirming the continuity of the high-grade shoot as part of the resource definition program. - Positive factor: Contributes to the high AgEq value. - Positive factor: Part of the resource definition program, confirming continuity of the high-grade shoot. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated. Evidence · table > 1.97 Context: 0.96 #### Tags used in scoring **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH532 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH532 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-32) Santa Ana · silver #### Identity - Hole ID: DH532 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 619 - Grade Unit: g/t - Intercept: 0.49 m - From: 179.62 m - To: 180.11 m - Intercept Depth: 179.62 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH532:179.62-180.11 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503568.197 - Northing: 561155.748 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1029.6 m - Azimuth: 144 ° - Dip: -72 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 798 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 619 g/t Ag over 0.49m is a bonanza-grade intercept, well above the peer average of 86.788 g/t Ag, and strongly supports the high-grade potential of the Aguilar vein for resource definition. - Positive factor: Bonanza-grade silver intercept, significantly above peer average and project average. - Positive factor: Confirms high-grade mineralization within the broader interval as part of the resource definition program. - Negative factor: True width not estimated. Evidence · table > 619 Context: 0.49 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The silver grade of 619 g/t over 0.49m is exceptionally high, well above the deposit-type norm of 86.788 g/t Ag. Evidence · table > 619 Context: 0.49 **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH532 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH532 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-33) Santa Ana · gold #### Identity - Hole ID: DH532 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 2.02 - Grade Unit: g/t - Intercept: 0.49 m - From: 179.62 m - To: 180.11 m - Intercept Depth: 179.62 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH532:179.62-180.11 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503568.197 - Northing: 561155.748 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1029.6 m - Azimuth: 144 ° - Dip: -72 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 798 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 2.02 g/t over 0.49m, while below the project average, significantly boosts the AgEq grade for this high-grade sub-interval and is important for resource definition. - Positive factor: Contributes to the high AgEq value. - Positive factor: Part of the resource definition program, confirming continuity of the high-grade shoot. - Negative factor: Gold grade is below the project average for gold \(7.333 g/t\). - Negative factor: True width not estimated. Evidence · table > 2.02 Context: 0.49 #### Tags used in scoring **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH532 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH535 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-34) Santa Ana · silver #### Identity - Hole ID: DH535 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 835 - Grade Unit: g/t - Intercept: 0.84 m - From: 178.73 m - To: 179.57 m - Intercept Depth: 178.73 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH535:178.73-179.57 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503567.04 - Northing: 561156.89 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1030.23 m - Azimuth: 114 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1659 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The intercept of 835 g/t Ag over 0.84m is a bonanza-grade result, well above the peer average of 86.788 g/t Ag, and is a key highlight for confirming the continuity of the high-grade shoot as part of the resource definition program. - Positive factor: Bonanza-grade silver intercept, significantly above peer average and project average. - Positive factor: Part of the resource definition program, confirming continuity of the high-grade shoot. - Negative factor: True width not estimated. Evidence · table > 835 Context: 0.84 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The silver grade of 835 g/t over 0.84m is exceptionally high, well above the deposit-type norm of 86.788 g/t Ag. Evidence · table > 835 Context: 0.84 **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH535 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH535 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-35) Santa Ana · gold #### Identity - Hole ID: DH535 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 9.33 - Grade Unit: g/t - Intercept: 0.84 m - From: 178.73 m - To: 179.57 m - Intercept Depth: 178.73 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH535:178.73-179.57 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503567.04 - Northing: 561156.89 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1030.23 m - Azimuth: 114 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1659 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 9.33 g/t over 0.84m is a strong result, above the project average, and significantly boosts the AgEq grade for this bonanza-grade interval, important for resource definition. - Positive factor: Strong gold grade, above the project average \(7.333 g/t Au\). - Positive factor: Contributes significantly to the bonanza AgEq value. - Positive factor: Part of the resource definition program, confirming continuity of the high-grade shoot. - Negative factor: True width not estimated. Evidence · table > 9.33 Context: 0.84 #### Tags used in scoring **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH535 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH535 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-36) Santa Ana · silver #### Identity - Hole ID: DH535 - Project: Santa Ana - Commodity: silver - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 1549 - Grade Unit: g/t - Intercept: 0.45 m - From: 179.12 m - To: 179.57 m - Intercept Depth: 178.73 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH535:179.12-179.57 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503567.04 - Northing: 561156.89 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1030.23 m - Azimuth: 114 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3080 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: This included interval of 1,549 g/t Ag over 0.45m is an exceptional bonanza-grade result, well above the peer average of 86.788 g/t Ag and the project's best grade, and is a key highlight for confirming the continuity of the high-grade shoot for resource definition. - Positive factor: Exceptional bonanza-grade silver intercept, significantly above peer average and project average. - Positive factor: Confirms high-grade mineralization within the broader interval as part of the resource definition program. - Negative factor: True width not estimated. Evidence · table > 1,549 Context: 0.45 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The silver grade of 1,549 g/t over 0.45m is exceptionally high, well above the deposit-type norm of 86.788 g/t Ag and the project's best grade of 8022 g/t Ag. Evidence · table > 1,549 Context: 0.45 **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH535 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH535 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-37) Santa Ana · gold #### Identity - Hole ID: DH535 - Project: Santa Ana - Commodity: gold - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Grade: 17.35 - Grade Unit: g/t - Intercept: 0.45 m - From: 179.12 m - To: 179.57 m - Intercept Depth: 178.73 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Group ID: DH535:179.12-179.57 - Mining Method: underground #### Location - Location: Aguilar - Easting: 503567.04 - Northing: 561156.89 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1030.23 m - Azimuth: 114 ° - Dip: -61 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3080 - Metal Eq. Unit: g/t AgEq - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: The gold grade of 17.35 g/t over 0.45m is an exceptional bonanza-grade result, well above the project average and close to the project's best gold grade, and significantly boosts the AgEq grade for this bonanza-grade sub-interval, important for resource definition. - Positive factor: Exceptional bonanza-grade gold intercept, significantly above project average \(7.333 g/t Au\). - Positive factor: Contributes significantly to the bonanza AgEq value. - Positive factor: Part of the resource definition program, confirming continuity of the high-grade shoot. - Negative factor: True width not estimated. Evidence · table > 17.35 Context: 0.45 #### Tags used in scoring **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: The gold grade of 17.35 g/t over 0.45m is exceptionally high, well above the deposit-type norm of 1 g/t Au for underground epithermal and the project's average of 7.333 g/t Au. Evidence · table > 17.35 Context: 0.45 **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: DH535 is part of the resource definition program, demonstrating that the previously known high-grade shoot remains open along strike and at depth. Evidence · text > DH532 and DH535 are part of the resource definition program and demonstrate that the previously known high-grade shoot remains open along strike and at depth \(Figure 2\). **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details standard protocols for sampling and assay, including certified labs, blanks, duplicates, and certified reference materials. Evidence · text > Outcrop Silver applied its standard protocols for sampling and assay for exploration activities. Core diameter is a mix of HTW and NTW, depending on the drill hole depth. Diamond drill core boxes were photographed, sawed, sampled, and tagged. Samples were bagged, tagged, and packaged for shipment by truck from Santa Ana's core logging facilities in Falan, Colombia to the Actlabs certified sample preparation facility in Medellin, Colombia . ActLabs is an accredited laboratory independent of the Company. HQ-NTW core is sawn with one-half shipped. Samples delivered to Actlabs were AA assayed on Au, Ag, Pb, and Zn at Medellin using 1A2Au, 1A3Au, Multi-elements AR \(Ag Cu Pb Zn\), and Code 8 methods. Then, samples were sent to Actlabs Canada in Ancaster, Ontario , for ICP multi-elemental analysis under code 1E3. In line with QA/QC best practices, blanks, duplicates, and certified reference materials are inserted into the sample stream at approximately 3 control samples every 20 samples to monitor laboratory performance. A comparison of control samples and their standard deviations indicates acceptable assay accuracy and no detectable contamination. No material QA/QC issues have been identified with respect to sample collection, security, and assaying. The samples are analyzed for gold and silver using a standard fire assay on a 30-gram sample with a gravimetric finish for over-limits. Multi-element geochemistry was determined by ICP-MS using either aqua regia or four acid digestions. Crush rejects, pulps, and the remaining core are stored in a secured facility at Santa Ana for future assay verification. **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " #### Rejected tags **QP/CP Signed** — Rejected; excluded from scoring Polarity: positive Story-specific tag Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Reason: Mr. Guillermo Hernandez, CPG-AIPG, Vice-President Exploration at Outcrop Silver, is a Qualified Person for the Company and has reviewed and approved the technical information. Evidence · text > The technical information contained in this news release has been reviewed and approved by Mr. Guillermo Hernandez , CPG-AIPG, Vice-President Exploration at Outcrop Silver. Mr. Hernandez is a Qualified Person for the Company as defined by National Instrument 43-101. ### DH511 [Link to this fact](https://atlas-extractions.minestarters.com/news/outcrop-silver-extends-aguilar-vein-450-metres-south-and-identifies-potential-ne--e10548fb-bb54-413e-9aef-947c88824653#fact-drill-facts-38) Santa Ana #### Identity - Hole ID: DH511 - Project: Santa Ana - Region: colombia - Reported Region: colombia - Ticker: OCG #### Geometry - Hole Depth: 160.87 m #### Classification - Deposit Type: epithermal - Program: mixed - Sample Type: drill - Mining Method: underground #### Location - Easting: 503310.947 - Northing: 560819.904 - CRS: UTM system, Zone 18N, WGS84 projection - Elevation: 1053.51 m - Azimuth: 137 ° - Dip: -45 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: Actlabs - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Assumptions Disclosed: Yes #### Compositing - Cutoff Grade: 150 - Cutoff Unit: g/t AgEq #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2025-11-26T00:00:00.000Z Reasoning: DH511 is part of the significant step-out drilling but returned no significant results, indicating sub-economic mineralization in this specific intercept. This is a negative result for this particular hole, though it contributes to the overall understanding of the vein system. - Positive factor: Part of a 450m step-out, confirming vein continuity beneath cover. - Negative factor: No significant results reported for this hole, indicating sub-economic mineralization. - Negative factor: True width not estimated for step-out holes. Evidence · table > DH511 Context: SAAG25DH511 #### Tags used in scoring **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: DH511 is one of the drill holes representing a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover. Evidence · text > Five drill holes \(DH514, DH517, DH520, DH524, and DH528\) represent a 450 metre step out to the south, confirming the Aguilar vein continues beneath volcanic cover and remains open along strike and at depth. **Apparent Width Only** Polarity: negative Definition: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness. Why it applies: The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. Evidence · text > The current knowledge of the step-out in the Aguilar vein does not allow for estimating the true width of the intercepts. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "mixed" **Nearology Play** Polarity: neutral Definition: Value premise rests on proximity to a known deposit rather than own results. Why it applies: proximity is offered as the value premise: "The drilling campaign aims to extend known mineralization and test new high-potential areas along the permitted section " ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.