OUTCROP SILVER REPORTS HIGH-GRADE SILVER-GOLD INTERCEPTS FROM MORENA AND AGUILAR DRILLING
Original announcement by tmx on
- Company
- Outcrop Silver & Gold Corporation
- Ticker
- OCG
- Exchange
- TSX
- Region
- Colombia
- Primary commodity
- Silver
- Secondary commodities
- Gold
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-16 14:39:26 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Outcrop Silver & Gold Corporation announced high-grade silver-gold drill results from its Morena and Aguilar targets at the Santa Ana project in Colombia. Notable intercepts include 0.71 metres grading 1,646 g/t Ag and 10.35 g/t Au (2,559 g/t AgEq) in hole DH613, and 1.74 metres grading 488 g/t Ag and 1.79 g/t Au (646 g/t AgEq) in hole DH601. These results will be included in an upcoming mineral resource estimate update expected in September 2026.
Reasoning: Outcrop Silver reported several high-grade silver-gold intercepts, including bonanza grades, from its Morena and Aguilar targets, which will be incorporated into an anticipated mineral resource estimate update. The results confirm structural continuity and extend known mineralization.
Positive factors
- High-grade silver-gold intercepts reported
- True width estimates provided for intercepts
- QA/QC procedures and QP sign-off disclosed
- Confirmation of mineralization continuity
- Upcoming MRE update incorporating new targets
Negative factors
- Some intercepts are narrow
- Several holes reported as weakly mineralized
Facts used in scoring: 52
Extracted facts
Stored fact records: 52. Some facts used in scoring do not have a stored record.
Drill Results (51)
DH588Santa Ana · silverGrade: 180Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- DH588
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 180
- Grade Unit
- g/t
- Intercept
- 0.66 m
- True Width
- 0.44 m
- From
- 294.07 m
- To
- 294.73 m
- Hole Depth
- 325.83 m
- Intercept Depth
- 294.07 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH588:294.07-294.73
Location
- Location
- Morena
- Easting
- 504710.802
- Northing
- 561587.777
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 936.533 m
- Azimuth
- 116 °
- Dip
- -71 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 279
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A strong silver intercept from the Morena vein system, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Strong silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“180”
Context: 0.66
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH598Santa Ana · silverGrade: 173Grade Unit: g/tIntercept: 0.49 mView all detailsHide details
Identity
- Hole ID
- DH598
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 173
- Grade Unit
- g/t
- Intercept
- 0.49 m
- True Width
- 0.17 m
- From
- 233.04 m
- To
- 233.53 m
- Hole Depth
- 246.27 m
- Intercept Depth
- 233.04 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH598:233.04-233.53
Location
- Location
- Morena
- Easting
- 504878.816
- Northing
- 561629.374
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 970.012 m
- Azimuth
- 79 °
- Dip
- -73 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 189
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A moderate silver intercept from the Morena vein system, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Moderate silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“173”
Context: 0.49
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH601Santa Ana · silverGrade: 488Grade Unit: g/tIntercept: 1.74 mView all detailsHide details
Identity
- Hole ID
- DH601
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 488
- Grade Unit
- g/t
- Intercept
- 1.74 m
- True Width
- 1.42 m
- From
- 388.11 m
- To
- 389.85 m
- Hole Depth
- 405.38 m
- Intercept Depth
- 388.11 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH601:388.11-389.85
Location
- Location
- Morena
- Easting
- 504773.683
- Northing
- 561789.993
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 983.143 m
- Azimuth
- 131 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 646
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A significant high-grade silver intercept from the Morena vein system, with good true width and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Evidence · table
“488”
Context: 1.74
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.42
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH601Santa Ana · silverGrade: 974Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH601
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 974
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.24 m
- From
- 388.11 m
- To
- 388.41 m
- Hole Depth
- 405.38 m
- Intercept Depth
- 388.11 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH601:388.11-388.41
Location
- Location
- Morena
- Easting
- 504773.683
- Northing
- 561789.993
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 983.143 m
- Azimuth
- 131 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1524
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A bonanza-grade silver intercept included within a broader zone in DH601, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“974”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH601Santa Ana · silverGrade: 1464Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH601
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1464
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.24 m
- From
- 389.55 m
- To
- 389.85 m
- Hole Depth
- 405.38 m
- Intercept Depth
- 389.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH601:389.55-389.85
Location
- Location
- Morena
- Easting
- 504773.683
- Northing
- 561789.993
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 983.143 m
- Azimuth
- 131 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1694
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A bonanza-grade silver intercept included within a broader zone in DH601, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“1,464”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH613Santa Ana · silverGrade: 1646Grade Unit: g/tIntercept: 0.71 mView all detailsHide details
Identity
- Hole ID
- DH613
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1646
- Grade Unit
- g/t
- Intercept
- 0.71 m
- True Width
- 0.34 m
- From
- 383.55 m
- To
- 384.26 m
- Hole Depth
- 405.68 m
- Intercept Depth
- 383.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH613:383.55-384.26
Location
- Location
- Morena
- Easting
- 504710.952
- Northing
- 561588.103
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 936.471 m
- Azimuth
- 87 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2559
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: An exceptional bonanza-grade silver intercept from the Morena vein system, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Bonanza silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“1,646”
Context: 0.71
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.34
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH613Santa Ana · silverGrade: 2839Grade Unit: g/tIntercept: 0.41 mView all detailsHide details
Identity
- Hole ID
- DH613
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 2839
- Grade Unit
- g/t
- Intercept
- 0.41 m
- True Width
- 0.2 m
- From
- 383.55 m
- To
- 383.96 m
- Hole Depth
- 405.68 m
- Intercept Depth
- 383.55 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH613:383.55-383.96
Location
- Location
- Morena
- Easting
- 504710.952
- Northing
- 561588.103
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 936.471 m
- Azimuth
- 87 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4403
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: An exceptional bonanza-grade silver intercept included within a broader zone in DH613, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Bonanza silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“2,839”
Context: 0.41
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH613Santa Ana · silverGrade: 127Grade Unit: g/tIntercept: 0.41 mView all detailsHide details
Identity
- Hole ID
- DH613
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 127
- Grade Unit
- g/t
- Intercept
- 0.41 m
- True Width
- 0.2 m
- From
- 397.14 m
- To
- 397.55 m
- Hole Depth
- 405.68 m
- Intercept Depth
- 397.14 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH613:397.14-397.55
Location
- Location
- Splay
- Easting
- 504710.952
- Northing
- 561588.103
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 936.471 m
- Azimuth
- 87 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 203
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A moderate silver intercept from a splay structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Moderate silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“127”
Context: 0.41
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH636Santa Ana · silverGrade: 78Grade Unit: g/tIntercept: 0.99 mView all detailsHide details
Identity
- Hole ID
- DH636
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 78
- Grade Unit
- g/t
- Intercept
- 0.99 m
- True Width
- 0.49 m
- From
- 471.47 m
- To
- 472.46 m
- Hole Depth
- 514.8 m
- Intercept Depth
- 471.47 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH636:471.47-472.46
Location
- Location
- Morena
- Easting
- 504772.394
- Northing
- 561790.15
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 983.566 m
- Azimuth
- 107 °
- Dip
- -68 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 111
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A weak silver intercept from the Morena vein system, with true width estimated and QA/QC procedures disclosed.
Positive factors
- True width disclosed
- QA/QC disclosed
Negative factors
- Weak silver grade
Evidence · table
“78”
Context: 0.99
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH643Santa Ana · silverGrade: 196Grade Unit: g/tIntercept: 0.49 mView all detailsHide details
Identity
- Hole ID
- DH643
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 196
- Grade Unit
- g/t
- Intercept
- 0.49 m
- True Width
- 0.44 m
- From
- 86.76 m
- To
- 87.25 m
- Hole Depth
- 201.77 m
- Intercept Depth
- 86.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH643:86.76-87.25
Location
- Location
- Morena
- Easting
- 504905.967
- Northing
- 561600.87
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 965.589 m
- Azimuth
- 130 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 219
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A moderate silver intercept from the Morena vein system, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Moderate silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“196”
Context: 0.49
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH627Santa Ana · silverGrade: 130Grade Unit: g/tIntercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- DH627
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 130
- Grade Unit
- g/t
- Intercept
- 0.39 m
- True Width
- 0.28 m
- From
- 234.61 m
- To
- 235 m
- Hole Depth
- 260.17 m
- Intercept Depth
- 234.61 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH627:234.61-235
Location
- Location
- Aguilar
- Easting
- 503598.57
- Northing
- 561217.485
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 1018.593 m
- Azimuth
- 122 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 161
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A moderate silver intercept from the Aguilar vein system, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Moderate silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“130”
Context: 0.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH627Santa Ana · silverGrade: 205Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH627
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 205
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.21 m
- From
- 259.57 m
- To
- 259.87 m
- Hole Depth
- 260.17 m
- Intercept Depth
- 259.57 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH627:259.57-259.87
Location
- Location
- Splay
- Easting
- 503598.57
- Northing
- 561217.485
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 1018.593 m
- Azimuth
- 122 °
- Dip
- -81 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 230
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A strong silver intercept from a splay structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Strong silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“205”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH628Santa Ana · silverGrade: 58Grade Unit: g/tIntercept: 0.34 mView all detailsHide details
Identity
- Hole ID
- DH628
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 58
- Grade Unit
- g/t
- Intercept
- 0.34 m
- True Width
- 0.23 m
- From
- 205.19 m
- To
- 205.53 m
- Hole Depth
- 308.45 m
- Intercept Depth
- 205.19 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH628:205.19-205.53
Location
- Location
- Splay
- Easting
- 503598.679
- Northing
- 561217.365
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 1018.632 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 164
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A weak silver intercept from a splay structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- True width disclosed
- QA/QC disclosed
Negative factors
- Weak silver grade
- Narrow intercept width
Evidence · table
“58”
Context: 0.34
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.23
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH628Santa Ana · silverGrade: 103Grade Unit: g/tIntercept: 2.21 mView all detailsHide details
Identity
- Hole ID
- DH628
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 103
- Grade Unit
- g/t
- Intercept
- 2.21 m
- True Width
- 1.04 m
- From
- 287.79 m
- To
- 290 m
- Hole Depth
- 308.45 m
- Intercept Depth
- 287.79 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH628:287.79-290
Location
- Location
- Aguilar
- Easting
- 503598.679
- Northing
- 561217.365
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 1018.632 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 229
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A moderate silver intercept from the Aguilar vein system, with good true width and QA/QC procedures disclosed.
Positive factors
- Moderate silver grade
- True width disclosed
- QA/QC disclosed
Evidence · table
“103”
Context: 2.21
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH628Santa Ana · silverGrade: 440Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH628
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 440
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.14 m
- From
- 287.79 m
- To
- 288.09 m
- Hole Depth
- 308.45 m
- Intercept Depth
- 287.79 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH628:287.79-288.09
Location
- Location
- Aguilar
- Easting
- 503598.679
- Northing
- 561217.365
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 1018.632 m
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1034
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A high-grade silver intercept included within a broader zone in DH628, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“440”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH631Santa Ana · silverGrade: 1554Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH631
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1554
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.19 m
- From
- 124.22 m
- To
- 124.52 m
- Hole Depth
- 190.19 m
- Intercept Depth
- 124.22 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH631:124.22-124.52
Location
- Location
- Aguilar N
- Easting
- 503899.76
- Northing
- 561553.88
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 939.1 m
- Azimuth
- 272 °
- Dip
- -84 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2033
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: An exceptional bonanza-grade silver intercept from the Aguilar N structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Bonanza silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“1554”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.19
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH632Santa Ana · silverGrade: 381Grade Unit: g/tIntercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- DH632
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 381
- Grade Unit
- g/t
- Intercept
- 0.39 m
- True Width
- 0.22 m
- From
- 101.42 m
- To
- 101.81 m
- Hole Depth
- 225.3 m
- Intercept Depth
- 101.42 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH632:101.42-101.81
Location
- Location
- Aguilar N
- Easting
- 503773.653
- Northing
- 561287.894
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 993.531 m
- Azimuth
- 139 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 795
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A high-grade silver intercept from the Aguilar N structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“381”
Context: 0.39
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.22
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH632Santa Ana · silverGrade: 493Grade Unit: g/tIntercept: 0.61 mView all detailsHide details
Identity
- Hole ID
- DH632
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 493
- Grade Unit
- g/t
- Intercept
- 0.61 m
- True Width
- 0.6 m
- From
- 201.8 m
- To
- 202.41 m
- Hole Depth
- 225.3 m
- Intercept Depth
- 201.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH632:201.8-202.41
Location
- Location
- Aguilar
- Easting
- 503773.653
- Northing
- 561287.894
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 993.531 m
- Azimuth
- 139 °
- Dip
- -78 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 848
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A high-grade silver intercept from the Aguilar vein system, with good true width and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“493”
Context: 0.61
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH635Santa Ana · silverGrade: 452Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH635
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 452
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.14 m
- From
- 153.42 m
- To
- 153.72 m
- Hole Depth
- 246.27 m
- Intercept Depth
- 153.42 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH635:153.42-153.72
Location
- Location
- Aguilar N
- Easting
- 503773.614
- Northing
- 561291.179
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 993.745 m
- Azimuth
- 224 °
- Dip
- -82 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 586
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A high-grade silver intercept from the Aguilar N structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“452”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH635Santa Ana · silverGrade: 264Grade Unit: g/tIntercept: 0.31 mView all detailsHide details
Identity
- Hole ID
- DH635
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 264
- Grade Unit
- g/t
- Intercept
- 0.31 m
- True Width
- 0.19 m
- From
- 215.67 m
- To
- 215.98 m
- Hole Depth
- 246.27 m
- Intercept Depth
- 215.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH635:215.67-215.98
Location
- Location
- Splay
- Easting
- 503773.614
- Northing
- 561291.179
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 993.745 m
- Azimuth
- 224 °
- Dip
- -82 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 799
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A strong silver intercept from a splay structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Strong silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“264”
Context: 0.31
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.19
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH638Santa Ana · silverGrade: 255Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH638
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 255
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.22 m
- From
- 118.76 m
- To
- 119.06 m
- Hole Depth
- 310.74 m
- Intercept Depth
- 118.76 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH638:118.76-119.06
Location
- Location
- Splay
- Easting
- 503604.038
- Northing
- 561236.885
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 1008.229 m
- Azimuth
- 105 °
- Dip
- -87 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 934
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A strong silver intercept from a splay structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Strong silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“255”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.22
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH639Santa Ana · silverGrade: 285Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- DH639
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 285
- Grade Unit
- g/t
- Intercept
- 0.7 m
- True Width
- 0.67 m
- From
- 128.67 m
- To
- 129.37 m
- Hole Depth
- 150.9 m
- Intercept Depth
- 128.67 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH639:128.67-129.37
Location
- Location
- Aguilar NEW
- Easting
- 503982.883
- Northing
- 561670.656
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 928.105 m
- Azimuth
- 162 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 425
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A strong silver intercept from the Aguilar NEW structure, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Strong silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“285”
Context: 0.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.67
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH641Santa Ana · silverGrade: 234Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- DH641
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 234
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.45 m
- From
- 276.5 m
- To
- 278.25 m
- Hole Depth
- 307 m
- Intercept Depth
- 276.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH641:276.5-278.25
Location
- Location
- Aguilar N
- Easting
- 503942.171
- Northing
- 561715.938
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 936.771 m
- Azimuth
- 157 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 303
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A strong silver intercept from the Aguilar N structure, with good true width and QA/QC procedures disclosed.
Positive factors
- Strong silver grade
- True width disclosed
- QA/QC disclosed
Evidence · table
“234”
Context: 1.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH641Santa Ana · silverGrade: 486Grade Unit: g/tIntercept: 0.38 mView all detailsHide details
Identity
- Hole ID
- DH641
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 486
- Grade Unit
- g/t
- Intercept
- 0.38 m
- True Width
- 0.32 m
- From
- 277.16 m
- To
- 277.54 m
- Hole Depth
- 307 m
- Intercept Depth
- 277.16 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH641:277.16-277.54
Location
- Location
- Aguilar
- Easting
- 503942.171
- Northing
- 561715.938
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 936.771 m
- Azimuth
- 157 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 626
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A high-grade silver intercept included within a broader zone in DH641, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Exceptional silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“486”
Context: 0.38
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH647Santa Ana · silverGrade: 173Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH647
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 173
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.3 m
- From
- 217.57 m
- To
- 217.87 m
- Hole Depth
- 240.3 m
- Intercept Depth
- 217.57 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- DH647:217.57-217.87
Location
- Location
- Aguilar
- Easting
- 503942.837
- Northing
- 561717.403
- CRS
- UTM system, Zone 18N, WGS84
- Elevation
- 936.856 m
- Azimuth
- 114 °
- Dip
- -63 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Actlabs
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 340
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: A moderate silver intercept from the Aguilar vein system, with true width estimated and QA/QC procedures disclosed.
Positive factors
- Moderate silver grade
- True width disclosed
- QA/QC disclosed
Negative factors
- Narrow intercept width
Evidence · table
“173”
Context: 0.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH588Santa Ana · goldGrade: 1.11Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- DH588
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 0.66 m
- True Width
- 0.44 m
- From
- 294.07 m
- To
- 294.73 m
- Intercept Depth
- 294.07 m
Classification
- Sample Type
- drill
- Group ID
- DH588:294.07-294.73
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 279
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.11 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.11”
Context: DH588
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH598Santa Ana · goldGrade: 0.19Grade Unit: g/tIntercept: 0.49 mView all detailsHide details
Identity
- Hole ID
- DH598
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 0.49 m
- True Width
- 0.17 m
- From
- 233.04 m
- To
- 233.53 m
- Intercept Depth
- 233.04 m
Classification
- Sample Type
- drill
- Group ID
- DH598:233.04-233.53
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 189
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: DH598
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.17
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH601Santa Ana · goldGrade: 1.79Grade Unit: g/tIntercept: 1.74 mView all detailsHide details
Identity
- Hole ID
- DH601
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 1.74 m
- True Width
- 1.42 m
- From
- 388.11 m
- To
- 389.85 m
- Intercept Depth
- 388.11 m
Classification
- Sample Type
- drill
- Group ID
- DH601:388.11-389.85
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 646
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.79 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.1 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.79”
Context: DH601
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.42
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH601Santa Ana · goldGrade: 6.23Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH601
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 6.23
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.24 m
- From
- 388.11 m
- To
- 388.41 m
- Intercept Depth
- 388.11 m
Classification
- Sample Type
- drill
- Group ID
- DH601:388.11-388.41
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1524
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 6.23 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.9 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.23 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.23”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCoordinates are in the UTM · silverGrade: 1464Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Coordinates are in the UTM
- Commodity
- silver
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1464
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.24 m
- From
- 389.55 m
- To
- 389.85 m
- Intercept Depth
- 389.55 m
Classification
- Sample Type
- drill
- Group ID
- and:389.55-389.85
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1694
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1464 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 439.2 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 1464 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1,464”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andCoordinates are in the UTM · goldGrade: 2.61Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Coordinates are in the UTM
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 2.61
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.24 m
- From
- 389.55 m
- To
- 389.85 m
- Intercept Depth
- 389.55 m
Classification
- Sample Type
- drill
- Group ID
- and:389.55-389.85
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1694
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 2.61 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.61 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.61”
Context: and
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.24
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH613Santa Ana · goldGrade: 10.35Grade Unit: g/tIntercept: 0.71 mView all detailsHide details
Identity
- Hole ID
- DH613
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 10.35
- Grade Unit
- g/t
- Intercept
- 0.71 m
- True Width
- 0.34 m
- From
- 383.55 m
- To
- 384.26 m
- Intercept Depth
- 383.55 m
Classification
- Sample Type
- drill
- Group ID
- DH613:383.55-384.26
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 2559
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 10.35 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 7.3 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 10.35 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.35”
Context: DH613
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.34
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH613Santa Ana · goldGrade: 17.72Grade Unit: g/tIntercept: 0.41 mView all detailsHide details
Identity
- Hole ID
- DH613
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 17.72
- Grade Unit
- g/t
- Intercept
- 0.41 m
- True Width
- 0.2 m
- From
- 383.55 m
- To
- 383.96 m
- Intercept Depth
- 383.55 m
Classification
- Sample Type
- drill
- Group ID
- DH613:383.55-383.96
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 4403
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 17.72 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 7.3 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 17.72 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“17.72”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH613Santa Ana · goldGrade: 0.86Grade Unit: g/tIntercept: 0.41 mView all detailsHide details
Identity
- Hole ID
- DH613
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 0.86
- Grade Unit
- g/t
- Intercept
- 0.41 m
- True Width
- 0.2 m
- From
- 397.14 m
- To
- 397.55 m
- Intercept Depth
- 397.14 m
Classification
- Sample Type
- drill
- Group ID
- DH613:397.14-397.55
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 203
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 0.86 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.86”
Context: DH613
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH636Santa Ana · goldGrade: 0.37Grade Unit: g/tIntercept: 0.99 mView all detailsHide details
Identity
- Hole ID
- DH636
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 0.99 m
- True Width
- 0.49 m
- From
- 471.47 m
- To
- 472.46 m
- Intercept Depth
- 471.47 m
Classification
- Sample Type
- drill
- Group ID
- DH636:471.47-472.46
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 111
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: DH636
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.49
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH643Santa Ana · goldGrade: 0.26Grade Unit: g/tIntercept: 0.49 mView all detailsHide details
Identity
- Hole ID
- DH643
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 0.49 m
- True Width
- 0.44 m
- From
- 86.76 m
- To
- 87.25 m
- Intercept Depth
- 86.76 m
Classification
- Sample Type
- drill
- Group ID
- DH643:86.76-87.25
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 219
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.26 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: DH643
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH627Santa Ana · goldGrade: 0.35Grade Unit: g/tIntercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- DH627
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 0.39 m
- True Width
- 0.28 m
- From
- 234.61 m
- To
- 235 m
- Intercept Depth
- 234.61 m
Classification
- Sample Type
- drill
- Group ID
- DH627:234.61-235
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 161
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: DH627
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.28
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH627Santa Ana · goldGrade: 0.28Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH627
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.21 m
- From
- 259.57 m
- To
- 259.87 m
- Intercept Depth
- 259.57 m
Classification
- Sample Type
- drill
- Group ID
- DH627:259.57-259.87
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 230
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.28 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: DH627
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.21
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH628Santa Ana · goldGrade: 1.2Grade Unit: g/tIntercept: 0.34 mView all detailsHide details
Identity
- Hole ID
- DH628
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.2
- Grade Unit
- g/t
- Intercept
- 0.34 m
- True Width
- 0.23 m
- From
- 205.19 m
- To
- 205.53 m
- Intercept Depth
- 205.19 m
Classification
- Sample Type
- drill
- Group ID
- DH628:205.19-205.53
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 164
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.2 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.20”
Context: DH628
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.23
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH628Santa Ana · goldGrade: 1.42Grade Unit: g/tIntercept: 2.21 mView all detailsHide details
Identity
- Hole ID
- DH628
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.42
- Grade Unit
- g/t
- Intercept
- 2.21 m
- True Width
- 1.04 m
- From
- 287.79 m
- To
- 290 m
- Intercept Depth
- 287.79 m
Classification
- Sample Type
- drill
- Group ID
- DH628:287.79-290
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 229
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.42 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.1 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.42”
Context: DH628
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH628Santa Ana · goldGrade: 6.73Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH628
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 6.73
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.14 m
- From
- 287.79 m
- To
- 288.09 m
- Intercept Depth
- 287.79 m
Classification
- Sample Type
- drill
- Group ID
- DH628:287.79-288.09
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1034
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 6.73 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.0 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.73 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.73”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH631Santa Ana · goldGrade: 5.44Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH631
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 5.44
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.19 m
- From
- 124.22 m
- To
- 124.52 m
- Intercept Depth
- 124.22 m
Classification
- Sample Type
- drill
- Group ID
- DH631:124.22-124.52
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 2033
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 5.44 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.44 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.44”
Context: DH631
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.19
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH632Santa Ana · goldGrade: 4.69Grade Unit: g/tIntercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- DH632
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 4.69
- Grade Unit
- g/t
- Intercept
- 0.39 m
- True Width
- 0.22 m
- From
- 101.42 m
- To
- 101.81 m
- Intercept Depth
- 101.42 m
Classification
- Sample Type
- drill
- Group ID
- DH632:101.42-101.81
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 795
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 4.69 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.69 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.69”
Context: DH632
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.22
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH632Santa Ana · goldGrade: 4.02Grade Unit: g/tIntercept: 0.61 mView all detailsHide details
Identity
- Hole ID
- DH632
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 4.02
- Grade Unit
- g/t
- Intercept
- 0.61 m
- True Width
- 0.6 m
- From
- 201.8 m
- To
- 202.41 m
- Intercept Depth
- 201.8 m
Classification
- Sample Type
- drill
- Group ID
- DH632:201.8-202.41
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 848
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 4.02 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.02 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.02”
Context: DH632
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH635Santa Ana · goldGrade: 1.52Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH635
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.14 m
- From
- 153.42 m
- To
- 153.72 m
- Intercept Depth
- 153.42 m
Classification
- Sample Type
- drill
- Group ID
- DH635:153.42-153.72
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 586
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.52 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.52”
Context: DH635
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.14
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH635Santa Ana · goldGrade: 6.06Grade Unit: g/tIntercept: 0.31 mView all detailsHide details
Identity
- Hole ID
- DH635
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 6.06
- Grade Unit
- g/t
- Intercept
- 0.31 m
- True Width
- 0.19 m
- From
- 215.67 m
- To
- 215.98 m
- Intercept Depth
- 215.67 m
Classification
- Sample Type
- drill
- Group ID
- DH635:215.67-215.98
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 799
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 6.06 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.9 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.06 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.06”
Context: DH635
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.19
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH638Santa Ana · goldGrade: 7.69Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH638
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 7.69
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.22 m
- From
- 118.76 m
- To
- 119.06 m
- Intercept Depth
- 118.76 m
Classification
- Sample Type
- drill
- Group ID
- DH638:118.76-119.06
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 934
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 7.69 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.3 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 7.69 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.69”
Context: DH638
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.22
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH639Santa Ana · goldGrade: 1.59Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- DH639
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.59
- Grade Unit
- g/t
- Intercept
- 0.7 m
- True Width
- 0.67 m
- From
- 128.67 m
- To
- 129.37 m
- Intercept Depth
- 128.67 m
Classification
- Sample Type
- drill
- Group ID
- DH639:128.67-129.37
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 425
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.59 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.59”
Context: DH639
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.67
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH641Santa Ana · goldGrade: 0.79Grade Unit: g/tIntercept: 1.75 mView all detailsHide details
Identity
- Hole ID
- DH641
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 0.79
- Grade Unit
- g/t
- Intercept
- 1.75 m
- True Width
- 1.45 m
- From
- 276.5 m
- To
- 278.25 m
- Intercept Depth
- 276.5 m
Classification
- Sample Type
- drill
- Group ID
- DH641:276.5-278.25
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 303
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 0.79 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.79”
Context: DH641
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.45
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH641Santa Ana · goldGrade: 1.58Grade Unit: g/tIntercept: 0.38 mView all detailsHide details
Identity
- Hole ID
- DH641
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.58
- Grade Unit
- g/t
- Intercept
- 0.38 m
- True Width
- 0.32 m
- From
- 277.16 m
- To
- 277.54 m
- Intercept Depth
- 277.16 m
Classification
- Sample Type
- drill
- Group ID
- DH641:277.16-277.54
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 626
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.58 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.58”
Context: Including
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.32
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
DH647Santa Ana · goldGrade: 1.89Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- DH647
- Project
- Santa Ana
- Commodity
- gold
- Region
- colombia
- Reported Region
- colombia
- Ticker
- OCG
Geometry
- Grade
- 1.89
- Grade Unit
- g/t
- Intercept
- 0.3 m
- True Width
- 0.3 m
- From
- 217.57 m
- To
- 217.87 m
- Intercept Depth
- 217.57 m
Classification
- Sample Type
- drill
- Group ID
- DH647:217.57-217.87
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 340
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: Expanded from assay table. 1.89 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.89”
Context: DH647
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.3
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Resource Estimates (1)
inferredSanta Ana · silverTonnes: 966000Grade: 435Grade Unit: g/tContained Metal: 13.5Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Santa Ana
- Commodity
- silver
- Region
- colombia
- Reported Region
- Colombia
- Ticker
- OCG
Resource scope
- Estimate type
- resource
- Effective date
- 2023-06-08T00:00:00.000Z
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- AMC Mining Consultants
- Resource group id
- resource:47f276f33f3e8f996b47
Resource Data
- Category
- inferred
- Tonnes
- 966000
- Grade
- 435
- Grade Unit
- g/t
- Contained Metal
- 13.5
- Contained Unit
- moz
Prior Estimate
- Resource Date
- 2023-06-08
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2023-06-08T00:00:00.000Z
Dates
- Event date
- 2026-08-05T00:00:00.000Z
Reasoning: This is a historical maiden inferred resource estimate for the Santa Ana project, compliant with NI 43-101, providing a baseline for the project's silver equivalent resources.
Positive factors
- NI 43-101 compliant
- QP signed
- Maiden Resource
Negative factors
- Stale Estimate
- Inferred Resource
Evidence · text
“inferred resource of 966 thousand tonnes containing 13.5 million ounces at a grade of 435 grams per tonne of silver equivalent”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: effective date is 3.2 years before this release
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.