P2 Gold Intersects 183.0 g/t Gold and 4.0% Copper Over 1.52 Meters within a Longer Mineralized Interval at the Lucky Strike Zone
Original announcement by tmx on
- Company
- P2 Gold Inc.
- Ticker
- PGLD
- Exchange
- TSX
- Region
- Nevada
- Primary commodity
- Gold
- Secondary commodities
- Copper
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-12 18:42:05 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
P2 Gold Inc. reported high-grade drill results from its Gabbs Project in Nevada, including an exceptional intercept of 183.0 g/t gold and 4.0% copper over 1.52 meters within a longer mineralized interval in hole GBD-021. This hole was a 100-meter step-out into an area with no historical drilling, confirming and extending the high-grade core of the Lucky Strike Zone. The company plans an updated Mineral Resource estimate in Q3 2026 and a feasibility study in Q4 2026.
Reasoning: The drill results include an exceptionally high-grade gold and copper intercept (183.0 g/t Au and 4.0% Cu over 1.52m) from a 100-meter step-out hole, indicating significant expansion potential and high-grade mineralization within the Lucky Strike Zone. This is highly material and novel for the project, despite the lack of true width disclosure for all intercepts.
Positive factors
- Exceptional high-grade gold and copper intercept in GBD-021, significantly above typical porphyry grades.
- Drilling confirms and extends the higher-grade core area of mineralization at Lucky Strike Zone.
- GBD-021 represents a 100-meter step-out into an area with no historical drilling, indicating potential for expansion.
- Visible gold encountered in GBD-021, associated with intense silicification and brecciation.
- Comprehensive QA/QC procedures disclosed, including certified lab, blanks, standards, and duplicates.
- Upcoming updated Mineral Resource estimate and feasibility study signal project advancement.
Negative factors
- True thickness of intercepts is not yet determined, meaning reported intervals are apparent widths.
- Some samples were capped, which may understate the true grade of those specific intervals, though the bonanza intercept was uncapped.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 24
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 183.0 g/t gold and 4.0% copper over 1.52 meters is exceptionally high-grade, far exceeding typical porphyry values for both metals.
Evidence · table
“183.00”
Context: 1.52
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: Footnote (1) explicitly states 'True thickness to be determined', indicating that the reported intervals are apparent widths.
Evidence · table
“True thickness to be determined.”
Context: (1) (2) (3) (4) (5) (6)
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drill hole GBD-021 is described as a '100-meter step out to the south into an area with no historical drilling', extending mineralization beyond previously known limits.
Evidence · text
“Visible gold was encountered in drill hole GBD-021, a 100-meter step out to the south into an area with no historical drilling.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including sample preparation by ALS Global, analysis methods (multi-digestion, ICP, fire assay), and insertion of blanks, standards, and field duplicates.
Evidence · table
“All samples were submitted for preparation by ALS Global at its facilities in Reno, Nevada, with the analysis completed at ALS Global facilities in Reno, Nevada, and North Vancouver, British Columbia. All samples were analyzed using multi-digestion with ICP finish and fire assay with AA finish for gold. Samples with over 10 ppm gold were fire assayed with a gravimetric finish. One in 20 samples was blank, one in 20 was a standard sample, and one in 20 samples had a sample cut from assay rejects assayed as a field duplicate.”
Context: (1) (2) (3) (4) (5) (6)
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Ken McNaughton, M.A.Sc., P.Eng., Chief Exploration Officer, P2 Gold, is named as the Qualified Person responsible for the Gabbs Project and has reviewed and approved the technical information.
Evidence · text
“Ken McNaughton, M.A.Sc., P.Eng., Chief Exploration Officer, P2 Gold, is the Qualified Person, as defined by National Instrument 43-101, responsible for the Gabbs Project. Mr. McNaughton has reviewed, verified, and approved the scientific and technical information in this news release.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The drill program is explicitly described as an 'Infill and Expansion Drill Program', indicating a component of infill drilling to raise resource confidence.
Evidence · text
“drilled at the Lucky Strike Zone as part of the Infill and Expansion Drill Program at its Gabbs Project”
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: The document states that 'On completion of the Infill and Expansion Drill Program, an updated Mineral Resource estimate will be prepared for Gabbs'.
Evidence · text
“On completion of the Infill and Expansion Drill Program, an updated Mineral Resource estimate will be prepared for Gabbs”
Extracted facts
Stored fact records: 24. Some facts used in scoring do not have a stored record.
Drill Results (24)
GBD-021Gabbs · goldGrade: 1.04Grade Unit: g/tIntercept: 53.34 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 1.04
- Grade Unit
- g/t
- Intercept
- 53.34 m
- From
- 60.96 m
- To
- 114.3 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:60.96-114.3
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows good gold mineralization over a substantial width, contributing positively to the resource, though the grade is moderate for porphyry gold and true width is not stated.
Positive factors
- Good gold grade over a significant width for a porphyry deposit.
- Part of an infill and expansion program, confirming mineralization.
Negative factors
- True thickness not determined.
- Some samples capped at 7 g/t gold, potentially understating the true grade.
Evidence · table
“1.04”
Context: 53.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · copperGrade: 0.35Grade Unit: %Intercept: 53.34 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 53.34 m
- From
- 60.96 m
- To
- 114.3 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:60.96-114.3
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This copper intercept is consistent with average porphyry grades over a good width, supporting the overall mineralization, though true width is not stated.
Positive factors
- Copper grade is around the average for porphyry copper deposits.
- Intercepted over a significant width, contributing to bulk tonnage potential.
Negative factors
- True thickness not determined.
- Some samples capped at 0.7% copper, potentially understating the true grade.
Evidence · table
“0.35”
Context: 53.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · goldGrade: 1.93Grade Unit: g/tIntercept: 19.81 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 1.93
- Grade Unit
- g/t
- Intercept
- 19.81 m
- From
- 65.53 m
- To
- 85.34 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:65.53-85.34
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows strong gold mineralization, enhancing the overall prospectivity of the broader intercept, though true width is not stated.
Positive factors
- Strong gold grade for a porphyry deposit over a good width.
- Confirms higher-grade mineralization within the broader interval.
Negative factors
- True thickness not determined.
- Some samples capped at 7 g/t gold, potentially understating the true grade.
Evidence · table
“1.93”
Context: 19.81
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · copperGrade: 0.44Grade Unit: %Intercept: 19.81 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 19.81 m
- From
- 65.53 m
- To
- 85.34 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:65.53-85.34
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows good copper mineralization, above the average for porphyry deposits, which is a positive for the project, though true width is not stated.
Positive factors
- Copper grade is near the 75th percentile for porphyry copper deposits, indicating good quality.
- Intercepted over a good width, contributing to the overall resource.
Negative factors
- True thickness not determined.
- Some samples capped at 0.7% copper, potentially understating the true grade.
Evidence · table
“0.44”
Context: 19.81
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · goldGrade: 183Grade Unit: g/tIntercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 183
- Grade Unit
- g/t
- Intercept
- 1.52 m
- From
- 73.15 m
- To
- 74.68 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:73.15-74.68
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This is an exceptionally high-grade gold intercept, representing a bonanza grade for a porphyry system, and its occurrence in a step-out hole suggests significant expansion potential for high-grade mineralization.
Positive factors
- Exceptional bonanza gold grade, far exceeding typical porphyry values.
- Intercept is uncapped, reflecting the true high-grade nature.
- Located within a 100-meter step-out hole, indicating potential for new high-grade zones.
- Visible gold and intense alteration suggest a significant mineralizing event.
Negative factors
- Relatively narrow intercept length.
- True thickness not determined.
Evidence · table
“183.00”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · copperGrade: 4Grade Unit: %Intercept: 1.52 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 4
- Grade Unit
- %
- Intercept
- 1.52 m
- From
- 73.15 m
- To
- 74.68 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:73.15-74.68
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This is an exceptionally high-grade copper intercept for a porphyry system, significantly contributing to the overall value of the bonanza zone and indicating strong mineralization.
Positive factors
- Exceptional copper grade, well above the 75th percentile for porphyry copper deposits.
- Intercept is uncapped, reflecting the true high-grade nature.
- Located within a 100-meter step-out hole, indicating potential for new high-grade zones.
Negative factors
- Relatively narrow intercept length.
- True thickness not determined.
Evidence · table
“4.00”
Context: 1.52
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · goldGrade: 0.3Grade Unit: g/tIntercept: 50.29 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 50.29 m
- From
- 114.3 m
- To
- 164.59 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:114.3-164.59
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak gold mineralization over a substantial width, contributing to the overall bulk tonnage but not high-grade potential, and true width is not stated.
Positive factors
- Intercepted over a significant width, indicating bulk tonnage potential.
Negative factors
- Weak gold grade for a porphyry deposit.
- True thickness not determined.
Evidence · table
“0.30”
Context: 50.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · copperGrade: 0.16Grade Unit: %Intercept: 50.29 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 50.29 m
- From
- 114.3 m
- To
- 164.59 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:114.3-164.59
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak copper mineralization over a substantial width, contributing to the overall bulk tonnage but at a lower grade, and true width is not stated.
Positive factors
- Intercepted over a significant width, indicating bulk tonnage potential.
Negative factors
- Weak copper grade for a porphyry deposit, below the 25th percentile.
- True thickness not determined.
Evidence · table
“0.16”
Context: 50.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · goldGrade: 0.14Grade Unit: g/tIntercept: 16.76 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 16.76 m
- From
- 216.41 m
- To
- 233.17 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:216.41-233.17
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak gold mineralization, but the hole ending in mineralization is a positive sign for depth potential, though true width is not stated.
Positive factors
- Hole ended in mineralization, suggesting potential for further depth extension.
Negative factors
- Weak gold grade for a porphyry deposit.
- True thickness not determined.
Evidence · table
“0.14”
Context: 16.76
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-021Gabbs · copperGrade: 0.23Grade Unit: %Intercept: 16.76 mView all detailsHide details
Identity
- Hole ID
- GBD-021
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 16.76 m
- From
- 216.41 m
- To
- 233.17 m
- Intercept Depth
- 60.96 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-021:216.41-233.17
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415030
- Northing
- 4293704
- Azimuth
- 180 °
- Dip
- -80 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak copper mineralization, but the hole ending in mineralization is a positive sign for depth potential, though true width is not stated.
Positive factors
- Hole ended in mineralization, suggesting potential for further depth extension.
Negative factors
- Weak copper grade for a porphyry deposit, below the 25th percentile.
- True thickness not determined.
Evidence · table
“0.23”
Context: 16.76
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-029Gabbs · goldGrade: 0.88Grade Unit: g/tIntercept: 56.39 mView all detailsHide details
Identity
- Hole ID
- GBD-029
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.88
- Grade Unit
- g/t
- Intercept
- 56.39 m
- From
- 97.54 m
- To
- 153.92 m
- Intercept Depth
- 97.54 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-029:97.54-153.92
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows moderate gold mineralization over a substantial width, contributing to the overall resource, though true width is not stated.
Positive factors
- Moderate gold grade over a significant width for a porphyry deposit.
- Confirms and extends mineralization in the Lucky Strike Zone.
Negative factors
- True thickness not determined.
Evidence · table
“0.88”
Context: 56.39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-029Gabbs · copperGrade: 0.34Grade Unit: %Intercept: 56.39 mView all detailsHide details
Identity
- Hole ID
- GBD-029
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 56.39 m
- From
- 97.54 m
- To
- 153.92 m
- Intercept Depth
- 97.54 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-029:97.54-153.92
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This copper intercept is consistent with average porphyry grades over a good width, supporting the overall mineralization, though true width is not stated.
Positive factors
- Copper grade is around the average for porphyry copper deposits.
- Intercepted over a significant width, contributing to bulk tonnage potential.
Negative factors
- True thickness not determined.
Evidence · table
“0.34”
Context: 56.39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-029Gabbs · goldGrade: 1.42Grade Unit: g/tIntercept: 21.34 mView all detailsHide details
Identity
- Hole ID
- GBD-029
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 1.42
- Grade Unit
- g/t
- Intercept
- 21.34 m
- From
- 102.11 m
- To
- 123.44 m
- Intercept Depth
- 97.54 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-029:102.11-123.44
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold mineralization, enhancing the overall prospectivity of the broader intercept, though true width is not stated.
Positive factors
- Moderate gold grade over a good width for a porphyry deposit.
- Confirms higher-grade mineralization within the broader interval.
Negative factors
- True thickness not determined.
Evidence · table
“1.42”
Context: 21.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-029Gabbs · copperGrade: 0.43Grade Unit: %Intercept: 21.34 mView all detailsHide details
Identity
- Hole ID
- GBD-029
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 21.34 m
- From
- 102.11 m
- To
- 123.44 m
- Intercept Depth
- 97.54 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-029:102.11-123.44
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 0 °
- Dip
- -90 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows good copper mineralization, above the average for porphyry deposits, which is a positive for the project, though true width is not stated.
Positive factors
- Copper grade is near the 75th percentile for porphyry copper deposits, indicating good quality.
- Intercepted over a good width, contributing to the overall resource.
Negative factors
- True thickness not determined.
Evidence · table
“0.43”
Context: 21.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-030Gabbs · goldGrade: 0.43Grade Unit: g/tIntercept: 77.72 mView all detailsHide details
Identity
- Hole ID
- GBD-030
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 77.72 m
- From
- 106.68 m
- To
- 184.4 m
- Intercept Depth
- 106.68 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-030:106.68-184.4
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 315 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak gold mineralization over a very substantial width, contributing to the overall bulk tonnage but at a lower grade, and true width is not stated.
Positive factors
- Intercepted over a very significant width, indicating large bulk tonnage potential.
- Confirms and extends mineralization in the Lucky Strike Zone.
Negative factors
- Weak gold grade for a porphyry deposit.
- True thickness not determined.
Evidence · table
“0.43”
Context: 77.72
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-030Gabbs · copperGrade: 0.23Grade Unit: %Intercept: 77.72 mView all detailsHide details
Identity
- Hole ID
- GBD-030
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 77.72 m
- From
- 106.68 m
- To
- 184.4 m
- Intercept Depth
- 106.68 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-030:106.68-184.4
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 315 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak copper mineralization over a very substantial width, contributing to the overall bulk tonnage but at a lower grade, and true width is not stated.
Positive factors
- Intercepted over a very significant width, indicating large bulk tonnage potential.
Negative factors
- Weak copper grade for a porphyry deposit, below the 25th percentile.
- True thickness not determined.
Evidence · table
“0.23”
Context: 77.72
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-030Gabbs · goldGrade: 0.64Grade Unit: g/tIntercept: 18.29 mView all detailsHide details
Identity
- Hole ID
- GBD-030
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 18.29 m
- From
- 140.21 m
- To
- 158.5 m
- Intercept Depth
- 106.68 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-030:140.21-158.5
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 315 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold mineralization, enhancing the overall prospectivity of the broader intercept, though true width is not stated.
Positive factors
- Moderate gold grade over a good width for a porphyry deposit.
- Confirms higher-grade mineralization within the broader interval.
Negative factors
- True thickness not determined.
Evidence · table
“0.64”
Context: 18.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-030Gabbs · copperGrade: 0.35Grade Unit: %Intercept: 18.29 mView all detailsHide details
Identity
- Hole ID
- GBD-030
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 18.29 m
- From
- 140.21 m
- To
- 158.5 m
- Intercept Depth
- 106.68 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-030:140.21-158.5
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 315 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows good copper mineralization, consistent with average porphyry grades, which is a positive for the project, though true width is not stated.
Positive factors
- Copper grade is around the average for porphyry copper deposits.
- Intercepted over a good width, contributing to the overall resource.
Negative factors
- True thickness not determined.
Evidence · table
“0.35”
Context: 18.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-031Gabbs · goldGrade: 0.57Grade Unit: g/tIntercept: 47.24 mView all detailsHide details
Identity
- Hole ID
- GBD-031
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 47.24 m
- From
- 108.2 m
- To
- 155.45 m
- Intercept Depth
- 108.2 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-031:108.2-155.45
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 225 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows moderate gold mineralization over a substantial width, contributing to the overall resource, though true width is not stated.
Positive factors
- Moderate gold grade over a significant width for a porphyry deposit.
- Confirms and extends mineralization in the Lucky Strike Zone.
Negative factors
- True thickness not determined.
Evidence · table
“0.57”
Context: 47.24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-031Gabbs · copperGrade: 0.23Grade Unit: %Intercept: 47.24 mView all detailsHide details
Identity
- Hole ID
- GBD-031
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 47.24 m
- From
- 108.2 m
- To
- 155.45 m
- Intercept Depth
- 108.2 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-031:108.2-155.45
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 225 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak copper mineralization over a substantial width, contributing to the overall bulk tonnage but at a lower grade, and true width is not stated.
Positive factors
- Intercepted over a significant width, indicating bulk tonnage potential.
Negative factors
- Weak copper grade for a porphyry deposit, below the 25th percentile.
- True thickness not determined.
Evidence · table
“0.23”
Context: 47.24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-031Gabbs · goldGrade: 0.9Grade Unit: g/tIntercept: 18.29 mView all detailsHide details
Identity
- Hole ID
- GBD-031
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 18.29 m
- From
- 109.73 m
- To
- 128.02 m
- Intercept Depth
- 108.2 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-031:109.73-128.02
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 225 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows moderate gold mineralization, enhancing the overall prospectivity of the broader intercept, though true width is not stated.
Positive factors
- Moderate gold grade over a good width for a porphyry deposit.
- Confirms higher-grade mineralization within the broader interval.
Negative factors
- True thickness not determined.
Evidence · table
“0.90”
Context: 18.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-031Gabbs · copperGrade: 0.3Grade Unit: %Intercept: 18.29 mView all detailsHide details
Identity
- Hole ID
- GBD-031
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 18.29 m
- From
- 109.73 m
- To
- 128.02 m
- Intercept Depth
- 108.2 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-031:109.73-128.02
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 225 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This sub-interval shows good copper mineralization, consistent with average porphyry grades, which is a positive for the project, though true width is not stated.
Positive factors
- Copper grade is around the average for porphyry copper deposits.
- Intercepted over a good width, contributing to the overall resource.
Negative factors
- True thickness not determined.
Evidence · table
“0.30”
Context: 18.29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-031Gabbs · goldGrade: 0.19Grade Unit: g/tIntercept: 45.72 mView all detailsHide details
Identity
- Hole ID
- GBD-031
- Project
- Gabbs
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 45.72 m
- From
- 155.45 m
- To
- 201.17 m
- Intercept Depth
- 108.2 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-031:155.45-201.17
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 225 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak gold mineralization over a substantial width, contributing to the overall bulk tonnage but at a lower grade, and true width is not stated.
Positive factors
- Intercepted over a significant width, indicating bulk tonnage potential.
Negative factors
- Weak gold grade for a porphyry deposit.
- True thickness not determined.
Evidence · table
“0.19”
Context: 45.72
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
GBD-031Gabbs · copperGrade: 0.19Grade Unit: %Intercept: 45.72 mView all detailsHide details
Identity
- Hole ID
- GBD-031
- Project
- Gabbs
- Commodity
- copper
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- PGLD
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 45.72 m
- From
- 155.45 m
- To
- 201.17 m
- Intercept Depth
- 108.2 m
Classification
- Deposit Type
- porphyry
- Program
- mixed
- Sample Type
- drill
- Group ID
- GBD-031:155.45-201.17
- Mining Method
- open_pit
Location
- Location
- Lucky Strike Zone
- Easting
- 415121
- Northing
- 4293776
- Azimuth
- 225 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-05-20T00:00:00.000Z
Reasoning: This intercept shows weak copper mineralization over a substantial width, contributing to the overall bulk tonnage but at a lower grade, and true width is not stated.
Positive factors
- Intercepted over a significant width, indicating bulk tonnage potential.
Negative factors
- Weak copper grade for a porphyry deposit, below the 25th percentile.
- True thickness not determined.
Evidence · table
“0.19”
Context: 45.72
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.