Pirate Gold Intersects 0.24% Cu Eq over 299.4m, Including 0.43% Cu Eq over 56.5m, at Moby Dick Discovery
Original announcement by tmx on
- Company
- Pirate Gold Corp.
- Ticker
- YARR
- Exchange
- TSX
- Region
- Newfoundland and Labrador
- Primary commodity
- Copper
- Secondary commodities
- Gold, Silver, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-17 06:24:03 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Pirate Gold Corp. announced significant drill results from its Moby Dick copper-gold discovery at the Treasure Island Project in Central Newfoundland. Hole PGC-26-118 intersected 299.4m at 0.24% Cu Eq, including higher-grade zones, expanding mineralization at depth and to the west. The company also reported initial anomalous copper-gold results from the Western EM anomaly, a new target with a similar geophysical signature. Assays are pending for 11 additional holes, and further exploration activities, including barge drilling and Mobile MT surveying, are underway to define the system's full extent.
Reasoning: The document reports significant drill intercepts from the Moby Dick copper-gold discovery, including a long interval of 299.4m at 0.24% Cu Eq and a deeper interval of 72.7m at 0.23% Cu Eq in hole PGC-26-118, expanding the known mineralization. New anomalous copper-gold mineralization was also found at the Western EM anomaly. The results are positive for the project's scale and potential, with good disclosure on QA/QC and metal equivalent calculations, though true widths are not provided.
Positive factors
- Long intercept lengths with significant copper equivalent grades, indicating broad mineralization.
- High-grade included intervals within broader zones, suggesting potential for higher-value zones.
- Expansion of known mineralization at depth and along strike at the Moby Dick discovery.
- Identification of new targets (Western EM anomaly) with similar geophysical signatures and anomalous mineralization.
- Clear disclosure of metal equivalent assumptions and QA/QC procedures.
Negative factors
- True widths are unknown, which may overstate actual thickness.
- Zinc mineralization is noted but its relationship to copper-gold and inclusion in metal equivalents is unclear.
- Assays are pending for 11 additional holes, creating uncertainty about the full program results.
Facts used in scoring: 97
Classification and evidence
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document explicitly states that true widths are unknown for all reported intervals.
Evidence · text
“True widths are unknown; all intervals are reported as downhole lengths.”
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: Metal equivalent grades are reported with clear disclosure of prices, recoveries, and calculation methodology.
Evidence · text
“Metal-equivalent grades (Cu Eq) and (Au Eq) are for illustrative purposes only to express the combined value of copper, gold and silver as a single metal grade. Metal-equivalent grades are calculated using US$4.00/lb copper, US$3,000/oz gold, US$30.00/oz silver. Metallurgical recoveries are assumed to be 80% for copper, 80% for gold and 80% for silver. For simplicity the following equation is used to calculate Cu Eq = copper (%) + (gold (g/t) x 1.094) + (silver (g/t) x 0.011) and Au Eq = gold (g/t) + (copper (%) x 0.914) + (silver (g/t) x 0.01).”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a detailed QA/QC statement mentioning certified lab, QP sign-off, and methods like blanks, standards, duplicates, and check assays.
Evidence · text
“Diamond drill holes are HQ size and are processed at the Company's secure core logging facility in Grand Falls-Windsor, NL by qualified geologists and technicians. Drill core samples are sawn in half and submitted to ALS Canada Ltd. ("ALS"), in Vancouver, BC for gold determination by fire assay method and for multi-element analysis. Drill core samples analyzed at ALS are submitted under prep code PREP-31. ALS performs Au-ICP21 and ME-MS61m analysis on all samples. Any samples suspected of containing visible gold are sent for metallic screen analysis. The Company inserts quality control (QC) samples at regular intervals, including blanks, reference materials and field duplicates to monitor the performance of the laboratory. Additionally, Pirate Gold Corp conducts check assays at a third-party facility which is independent of ALS Canada Ltd.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Hole PGC-26-118 was collared approximately 100m west of discovery holes, extending the known mineralization.
Evidence · text
“PGC-26-118: Collared approximately 100m west of discovery holes PGC-26-058 and PGC-26-068, the hole intersected 0.24% Cu Eq over 299.4m from 12.6m downhole.”
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: The Western EM anomaly is described as having a geophysical signature similar to the Moby Dick discovery, suggesting its potential based on proximity and analogous characteristics.
Evidence · text
“The Western EM anomaly is a low-resistivity zone identified by the 2026 airborne EM survey approximately 2.5 kilometres west of the Moby Dick resistivity anomaly (Figure 4). PGC-26-074A encountered unaltered gabbro with a broad anomalous copper-gold interval from the bedrock surface at 17.0m to 338.2m downhole, returning 0.07% Cu Eq (0.05% Cu; 0.01 g/t Au; 0.96 g/t Ag) over 321.2m. PGC-26-074A is the only hole to have tested the Western EM anomaly and did not adequately explain the EM response. Follow-up drilling is being planned from the southern side of the anomaly.”
Extracted facts
Stored fact records: 97. Some facts used in scoring do not have a stored record.
Drill Results (97)
PGC-26-074ATreasure Island · copperGrade: 0.05Grade Unit: %Intercept: 321.2 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 321.2 m
- From
- 17 m
- To
- 338.2 m
- Hole Depth
- 515 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:17-338.2
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.07
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is the first hole into a new target, the Western EM anomaly, showing a broad anomalous copper-gold interval. While the grade is low, the length and new target status are positive. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Broad intercept length of 321.2m, indicating significant mineralization.
- First hole into a new target (Western EM anomaly) with anomalous copper-gold, suggesting new potential.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Relatively low copper equivalent grade for the broad interval.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.07”
Context: 321.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · goldGrade: 0.01Grade Unit: g/tIntercept: 321.2 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 321.2 m
- From
- 17 m
- To
- 338.2 m
- Hole Depth
- 515 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:17-338.2
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.06
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is the first hole into a new target, the Western EM anomaly, showing a broad anomalous copper-gold interval. While the grade is low, the length and new target status are positive. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Broad intercept length of 321.2m, indicating significant mineralization.
- First hole into a new target (Western EM anomaly) with anomalous copper-gold, suggesting new potential.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Relatively low gold grade for the broad interval.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.01”
Context: 321.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · silverGrade: 0.96Grade Unit: g/tIntercept: 321.2 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 321.2 m
- From
- 17 m
- To
- 338.2 m
- Hole Depth
- 515 m
- Intercept Depth
- 17 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:17-338.2
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.06
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is the first hole into a new target, the Western EM anomaly, showing a broad anomalous copper-gold interval. While the grade is low, the length and new target status are positive. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Broad intercept length of 321.2m, indicating significant mineralization.
- First hole into a new target (Western EM anomaly) with anomalous copper-gold, suggesting new potential.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Relatively low silver grade for the broad interval.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.96”
Context: 321.2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · copperGrade: 0.56Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.56
- Grade Unit
- %
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 515 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:23-24
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- High copper equivalent grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (1.0m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.86”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · goldGrade: 0.154Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.154
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 515 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:23-24
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.79
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good gold grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (1.0m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.154”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · silverGrade: 12.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 12.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Hole Depth
- 515 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:23-24
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.79
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good silver grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (1.0m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“12.5”
Context: 1.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · copperGrade: 0.74Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.74
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 195 m
- To
- 195.7 m
- Hole Depth
- 515 m
- Intercept Depth
- 195 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:195-195.7
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- High copper equivalent grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (0.7m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.84”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · goldGrade: 0.019Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.019
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 195 m
- To
- 195.7 m
- Hole Depth
- 515 m
- Intercept Depth
- 195 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:195-195.7
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good gold grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (0.7m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.019”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · silverGrade: 7.55Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 7.55
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 195 m
- To
- 195.7 m
- Hole Depth
- 515 m
- Intercept Depth
- 195 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:195-195.7
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good silver grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (0.7m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“7.55”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · copperGrade: 0.08Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 24 m
- From
- 246 m
- To
- 270 m
- Hole Depth
- 515 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:246-270
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low copper equivalent grade within the Western EM anomaly. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 24.0m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low copper equivalent grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.11”
Context: 24.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · goldGrade: 0.02Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 246 m
- To
- 270 m
- Hole Depth
- 515 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:246-270
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low gold grade within the Western EM anomaly. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 24.0m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low gold grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.02”
Context: 24.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · silverGrade: 1.48Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 246 m
- To
- 270 m
- Hole Depth
- 515 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:246-270
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low silver grade within the Western EM anomaly. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 24.0m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low silver grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“1.48”
Context: 24.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · copperGrade: 0.44Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 336.6 m
- To
- 337.3 m
- Hole Depth
- 515 m
- Intercept Depth
- 336.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:336.6-337.3
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.92
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- High copper equivalent grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (0.7m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.92”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · goldGrade: 0.316Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.316
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 336.6 m
- To
- 337.3 m
- Hole Depth
- 515 m
- Intercept Depth
- 336.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:336.6-337.3
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good gold grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (0.7m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.316”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-074ATreasure Island · silverGrade: 12.5Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-074A
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 12.5
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 336.6 m
- To
- 337.3 m
- Hole Depth
- 515 m
- Intercept Depth
- 336.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-074A:336.6-337.3
- Mining Method
- open_pit
Location
- Location
- Western EM anomaly
- Easting
- 559295
- Northing
- 5397616
- Azimuth
- 155 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a high-grade narrow intercept within the broader anomalous zone at the Western EM anomaly. While the grade is strong, the very narrow width limits its overall materiality. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good silver grade for a porphyry deposit.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Very narrow intercept length (0.7m).
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“12.5”
Context: 0.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · copperGrade: 0.08Grade Unit: %Intercept: 20 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 20 m
- From
- 32 m
- To
- 52 m
- Hole Depth
- 398 m
- Intercept Depth
- 32 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:32-52
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.18
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low copper equivalent grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 20.0m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low copper equivalent grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.18”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · goldGrade: 0.04Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 32 m
- To
- 52 m
- Hole Depth
- 398 m
- Intercept Depth
- 32 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:32-52
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low gold grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 20.0m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low gold grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.04”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · silverGrade: 4.7Grade Unit: g/tIntercept: 20 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 4.7
- Grade Unit
- g/t
- Intercept
- 20 m
- From
- 32 m
- To
- 52 m
- Hole Depth
- 398 m
- Intercept Depth
- 32 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:32-52
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.16
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low silver grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 20.0m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low silver grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“4.70”
Context: 20.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · zincGrade: 1.26Grade Unit: %Intercept: 21.6 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.26
- Grade Unit
- %
- Intercept
- 21.6 m
- From
- 30.4 m
- To
- 52 m
- Hole Depth
- 398 m
- Intercept Depth
- 30.4 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:30.4-52
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with zinc mineralization at Moby Dick East. The zinc is not included in the metal equivalent calculation, which limits its immediate economic interpretation. QA/QC is well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 21.6m.
- Good disclosure of QA/QC.
Negative factors
- Zinc values are not included in metal-equivalent grades, making its economic contribution unclear.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“1.26”
Context: 21.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · copperGrade: 0.09Grade Unit: %Intercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 12.1 m
- From
- 164.9 m
- To
- 177 m
- Hole Depth
- 398 m
- Intercept Depth
- 164.9 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:164.9-177
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a narrow intercept with low copper equivalent grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low copper equivalent grade and narrow intercept length.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.12”
Context: 12.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · goldGrade: 0.024Grade Unit: g/tIntercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.024
- Grade Unit
- g/t
- Intercept
- 12.1 m
- From
- 164.9 m
- To
- 177 m
- Hole Depth
- 398 m
- Intercept Depth
- 164.9 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:164.9-177
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a narrow intercept with low gold grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low gold grade and narrow intercept length.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.024”
Context: 12.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · silverGrade: 0.77Grade Unit: g/tIntercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 12.1 m
- From
- 164.9 m
- To
- 177 m
- Hole Depth
- 398 m
- Intercept Depth
- 164.9 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:164.9-177
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a narrow intercept with low silver grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low silver grade and narrow intercept length.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.77”
Context: 12.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · copperGrade: 0.06Grade Unit: %Intercept: 35.4 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 35.4 m
- From
- 241.9 m
- To
- 277.3 m
- Hole Depth
- 398 m
- Intercept Depth
- 241.9 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:241.9-277.3
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low copper equivalent grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 35.4m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low copper equivalent grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.11”
Context: 35.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · goldGrade: 0.026Grade Unit: g/tIntercept: 35.4 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.026
- Grade Unit
- g/t
- Intercept
- 35.4 m
- From
- 241.9 m
- To
- 277.3 m
- Hole Depth
- 398 m
- Intercept Depth
- 241.9 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:241.9-277.3
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low gold grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 35.4m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low gold grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.026”
Context: 35.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · silverGrade: 1.8Grade Unit: g/tIntercept: 35.4 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 35.4 m
- From
- 241.9 m
- To
- 277.3 m
- Hole Depth
- 398 m
- Intercept Depth
- 241.9 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:241.9-277.3
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low silver grade at Moby Dick East. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 35.4m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low silver grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“1.80”
Context: 35.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-088Treasure Island · zincGrade: 0.52Grade Unit: %Intercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- PGC-26-088
- Project
- Treasure Island
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.52
- Grade Unit
- %
- Intercept
- 10.1 m
- From
- 240.9 m
- To
- 251 m
- Hole Depth
- 398 m
- Intercept Depth
- 240.9 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-088:240.9-251
- Mining Method
- open_pit
Location
- Location
- Moby Dick East
- Easting
- 563983
- Northing
- 5399338
- Azimuth
- 340 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a narrow intercept with low zinc grade at Moby Dick East. The zinc is not included in the metal equivalent calculation, which limits its immediate economic interpretation. QA/QC is well-disclosed, but true width is unknown.
Positive factors
- Good disclosure of QA/QC.
Negative factors
- Low zinc grade and narrow intercept length.
- Zinc values are not included in metal-equivalent grades, making its economic contribution unclear.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.52”
Context: 10.1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.13Grade Unit: %Intercept: 299.4 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 299.4 m
- From
- 12.6 m
- To
- 312 m
- Hole Depth
- 788 m
- Intercept Depth
- 12.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:12.6-312
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.24
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a highly significant intercept with exceptional length and strong copper equivalent grade, expanding the known mineralization at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Exceptional intercept length of 299.4m, indicating broad and continuous mineralization.
- Strong copper equivalent grade for a porphyry deposit.
- Expands known mineralization at Moby Dick.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.24”
Context: 299.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.087Grade Unit: g/tIntercept: 299.4 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.087
- Grade Unit
- g/t
- Intercept
- 299.4 m
- From
- 12.6 m
- To
- 312 m
- Hole Depth
- 788 m
- Intercept Depth
- 12.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:12.6-312
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a highly significant intercept with exceptional length and good gold grade, expanding the known mineralization at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Exceptional intercept length of 299.4m, indicating broad and continuous mineralization.
- Good gold grade for a porphyry deposit.
- Expands known mineralization at Moby Dick.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.087”
Context: 299.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 1.72Grade Unit: g/tIntercept: 299.4 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 299.4 m
- From
- 12.6 m
- To
- 312 m
- Hole Depth
- 788 m
- Intercept Depth
- 12.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:12.6-312
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a highly significant intercept with exceptional length and good silver grade, expanding the known mineralization at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Exceptional intercept length of 299.4m, indicating broad and continuous mineralization.
- Good silver grade for a porphyry deposit.
- Expands known mineralization at Moby Dick.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“1.72”
Context: 299.4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.21Grade Unit: %Intercept: 56.5 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 56.5 m
- From
- 149 m
- To
- 205.5 m
- Hole Depth
- 788 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:149-205.5
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the broader mineralization at Moby Dick, showing good length and high copper equivalent grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 56.5m with high copper equivalent grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.43”
Context: 56.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.184Grade Unit: g/tIntercept: 56.5 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.184
- Grade Unit
- g/t
- Intercept
- 56.5 m
- From
- 149 m
- To
- 205.5 m
- Hole Depth
- 788 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:149-205.5
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the broader mineralization at Moby Dick, showing good length and gold grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 56.5m with good gold grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.184”
Context: 56.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 2Grade Unit: g/tIntercept: 56.5 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 56.5 m
- From
- 149 m
- To
- 205.5 m
- Hole Depth
- 788 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:149-205.5
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the broader mineralization at Moby Dick, showing good length and silver grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 56.5m with good silver grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“2.00”
Context: 56.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.24Grade Unit: %Intercept: 35.6 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 35.6 m
- From
- 157 m
- To
- 192.6 m
- Hole Depth
- 788 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:157-192.6
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.52
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the broader mineralization at Moby Dick, showing good length and high copper equivalent grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 35.6m with high copper equivalent grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.52”
Context: 35.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.238Grade Unit: g/tIntercept: 35.6 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.238
- Grade Unit
- g/t
- Intercept
- 35.6 m
- From
- 157 m
- To
- 192.6 m
- Hole Depth
- 788 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:157-192.6
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the broader mineralization at Moby Dick, showing good length and gold grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 35.6m with good gold grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.238”
Context: 35.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 2.06Grade Unit: g/tIntercept: 35.6 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 35.6 m
- From
- 157 m
- To
- 192.6 m
- Hole Depth
- 788 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:157-192.6
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.47
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the broader mineralization at Moby Dick, showing good length and silver grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 35.6m with good silver grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“2.06”
Context: 35.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.26Grade Unit: %Intercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 19.8 m
- From
- 292.2 m
- To
- 312 m
- Hole Depth
- 788 m
- Intercept Depth
- 292.2 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:292.2-312
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length included interval within the broader mineralization at Moby Dick, showing good length and high copper equivalent grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 19.8m with high copper equivalent grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.43”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.112Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.112
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 292.2 m
- To
- 312 m
- Hole Depth
- 788 m
- Intercept Depth
- 292.2 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:292.2-312
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length included interval within the broader mineralization at Moby Dick, showing good length and gold grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 19.8m with good gold grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.112”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 4.12Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 4.12
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 292.2 m
- To
- 312 m
- Hole Depth
- 788 m
- Intercept Depth
- 292.2 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:292.2-312
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length included interval within the broader mineralization at Moby Dick, showing good length and silver grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 19.8m with good silver grade, indicating a significant zone.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“4.12”
Context: 19.8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.05Grade Unit: %Intercept: 25.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 25.7 m
- From
- 312 m
- To
- 337.7 m
- Hole Depth
- 788 m
- Intercept Depth
- 312 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:312-337.7
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low copper equivalent grade at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 25.7m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low copper equivalent grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.11”
Context: 25.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.047Grade Unit: g/tIntercept: 25.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.047
- Grade Unit
- g/t
- Intercept
- 25.7 m
- From
- 312 m
- To
- 337.7 m
- Hole Depth
- 788 m
- Intercept Depth
- 312 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:312-337.7
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low gold grade at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 25.7m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low gold grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.047”
Context: 25.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 1.02Grade Unit: g/tIntercept: 25.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 25.7 m
- From
- 312 m
- To
- 337.7 m
- Hole Depth
- 788 m
- Intercept Depth
- 312 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:312-337.7
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.1
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a moderate length intercept with low silver grade at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Moderate intercept length of 25.7m.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low silver grade.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“1.02”
Context: 25.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.07Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 8 m
- From
- 377.4 m
- To
- 385.4 m
- Hole Depth
- 788 m
- Intercept Depth
- 377.4 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:377.4-385.4
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a narrow intercept with low copper equivalent grade at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low copper equivalent grade and narrow intercept length.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.13”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.054Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.054
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 377.4 m
- To
- 385.4 m
- Hole Depth
- 788 m
- Intercept Depth
- 377.4 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:377.4-385.4
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a narrow intercept with low gold grade at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low gold grade and narrow intercept length.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.054”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 0.57Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 377.4 m
- To
- 385.4 m
- Hole Depth
- 788 m
- Intercept Depth
- 377.4 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:377.4-385.4
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a narrow intercept with low silver grade at Moby Dick. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- Low silver grade and narrow intercept length.
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.57”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.12Grade Unit: %Intercept: 72.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 72.7 m
- From
- 424 m
- To
- 496.7 m
- Hole Depth
- 788 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:424-496.7
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong intercept at depth, confirming the continuity of mineralization below a mafic dyke at Moby Dick. The length and grade are positive, and metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 72.7m, indicating significant mineralization at depth.
- Good copper equivalent grade for a porphyry deposit.
- Confirms mineralization continues at depth below a mafic dyke.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.23”
Context: 72.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.084Grade Unit: g/tIntercept: 72.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.084
- Grade Unit
- g/t
- Intercept
- 72.7 m
- From
- 424 m
- To
- 496.7 m
- Hole Depth
- 788 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:424-496.7
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong intercept at depth, confirming the continuity of mineralization below a mafic dyke at Moby Dick. The length and grade are positive, and metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 72.7m, indicating significant mineralization at depth.
- Good gold grade for a porphyry deposit.
- Confirms mineralization continues at depth below a mafic dyke.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.084”
Context: 72.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 1.65Grade Unit: g/tIntercept: 72.7 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.65
- Grade Unit
- g/t
- Intercept
- 72.7 m
- From
- 424 m
- To
- 496.7 m
- Hole Depth
- 788 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:424-496.7
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong intercept at depth, confirming the continuity of mineralization below a mafic dyke at Moby Dick. The length and grade are positive, and metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 72.7m, indicating significant mineralization at depth.
- Good silver grade for a porphyry deposit.
- Confirms mineralization continues at depth below a mafic dyke.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“1.65”
Context: 72.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · copperGrade: 0.17Grade Unit: %Intercept: 37 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 37 m
- From
- 424 m
- To
- 461 m
- Hole Depth
- 788 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:424-461
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the deeper mineralization at Moby Dick, showing good length and high copper equivalent grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 37.0m with high copper equivalent grade, indicating a significant zone at depth.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.33”
Context: 37.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · goldGrade: 0.121Grade Unit: g/tIntercept: 37 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.121
- Grade Unit
- g/t
- Intercept
- 37 m
- From
- 424 m
- To
- 461 m
- Hole Depth
- 788 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:424-461
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the deeper mineralization at Moby Dick, showing good length and gold grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 37.0m with good gold grade, indicating a significant zone at depth.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“0.121”
Context: 37.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-118the · silverGrade: 2.32Grade Unit: g/tIntercept: 37 mView all detailsHide details
Identity
- Hole ID
- PGC-26-118
- Project
- the
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 2.32
- Grade Unit
- g/t
- Intercept
- 37 m
- From
- 424 m
- To
- 461 m
- Hole Depth
- 788 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- PGC-26-118:424-461
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562352
- Northing
- 5398577
- Azimuth
- 345 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- g/t Au Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This is a strong included interval within the deeper mineralization at Moby Dick, showing good length and silver grade. The metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 37.0m with good silver grade, indicating a significant zone at depth.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- True width is unknown, potentially overstating the actual thickness.
Evidence · table
“2.32”
Context: 37.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PGC-26-058Treasure Island · copperGrade: 0.12Grade Unit: %Intercept: 112.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- PGC-26-058
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 112.4 m
- Hole Depth
- 602 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562447
- Northing
- 5398569
- Azimuth
- 345 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.38
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-06-17T00:00:00.000Z
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This historical discovery hole shows a strong intercept length and good copper equivalent grade, establishing initial mineralization at Moby Dick. While positive, its novelty is low as it's a re-stated result. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 112.4m with good copper equivalent grade.
- Historical discovery hole, establishing initial mineralization.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- This is a historical result, reducing its novelty.
- True width is unknown, potentially overstating the actual thickness.
Evidence · text
“Discovery hole PGC-26-058 returned 0.38% Cu Eq (0.12% Cu; 0.22 g/t Au; 1.76 g/t Ag) over 112.4m.”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
PGC-26-058Treasure Island · goldGrade: 0.22Grade Unit: g/tIntercept: 112.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- PGC-26-058
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 112.4 m
- Hole Depth
- 602 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562447
- Northing
- 5398569
- Azimuth
- 345 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.38
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-06-17T00:00:00.000Z
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This historical discovery hole shows a strong intercept length and good gold grade, establishing initial mineralization at Moby Dick. While positive, its novelty is low as it's a re-stated result. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 112.4m with good gold grade.
- Historical discovery hole, establishing initial mineralization.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- This is a historical result, reducing its novelty.
- True width is unknown, potentially overstating the actual thickness.
Evidence · text
“Discovery hole PGC-26-058 returned 0.38% Cu Eq (0.12% Cu; 0.22 g/t Au; 1.76 g/t Ag) over 112.4m.”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
PGC-26-058Treasure Island · silverGrade: 1.76Grade Unit: g/tIntercept: 112.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- PGC-26-058
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.76
- Grade Unit
- g/t
- Intercept
- 112.4 m
- Hole Depth
- 602 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562447
- Northing
- 5398569
- Azimuth
- 345 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.38
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-06-17T00:00:00.000Z
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This historical discovery hole shows a strong intercept length and good silver grade, establishing initial mineralization at Moby Dick. While positive, its novelty is low as it's a re-stated result. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 112.4m with good silver grade.
- Historical discovery hole, establishing initial mineralization.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- This is a historical result, reducing its novelty.
- True width is unknown, potentially overstating the actual thickness.
Evidence · text
“Discovery hole PGC-26-058 returned 0.38% Cu Eq (0.12% Cu; 0.22 g/t Au; 1.76 g/t Ag) over 112.4m.”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
PGC-26-068Treasure Island · copperGrade: 0.28Grade Unit: %Intercept: 49.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- PGC-26-068
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 49.4 m
- Hole Depth
- 596 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562447
- Northing
- 5398569
- Azimuth
- 345 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-06-17T00:00:00.000Z
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This historical included interval shows a strong intercept length and exceptional copper equivalent grade, establishing initial mineralization at Moby Dick. While positive, its novelty is low as it's a re-stated result. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 49.4m with exceptional copper equivalent grade.
- Historical discovery hole, establishing initial mineralization.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- This is a historical result, reducing its novelty.
- True width is unknown, potentially overstating the actual thickness.
Evidence · text
“including 1.48% Cu Eq (0.28% Cu; 1.07 g/t Au; 3.42 g/t Ag) over 49.4m.”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
PGC-26-068Treasure Island · goldGrade: 1.07Grade Unit: g/tIntercept: 49.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- PGC-26-068
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.07
- Grade Unit
- g/t
- Intercept
- 49.4 m
- Hole Depth
- 596 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562447
- Northing
- 5398569
- Azimuth
- 345 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-06-17T00:00:00.000Z
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This historical included interval shows a strong intercept length and exceptional gold grade, establishing initial mineralization at Moby Dick. While positive, its novelty is low as it's a re-stated result. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 49.4m with exceptional gold grade.
- Historical discovery hole, establishing initial mineralization.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- This is a historical result, reducing its novelty.
- True width is unknown, potentially overstating the actual thickness.
Evidence · text
“including 1.48% Cu Eq (0.28% Cu; 1.07 g/t Au; 3.42 g/t Ag) over 49.4m.”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
PGC-26-068Treasure Island · silverGrade: 3.42Grade Unit: g/tIntercept: 49.4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- PGC-26-068
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 3.42
- Grade Unit
- g/t
- Intercept
- 49.4 m
- Hole Depth
- 596 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Mining Method
- open_pit
Location
- Location
- Moby Dick
- Easting
- 562447
- Northing
- 5398569
- Azimuth
- 345 °
- Dip
- -44 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 1.48
- Metal Eq. Unit
- % Cu Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2026-06-17T00:00:00.000Z
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: This historical included interval shows a strong intercept length and exceptional silver grade, establishing initial mineralization at Moby Dick. While positive, its novelty is low as it's a re-stated result. Metal equivalent assumptions and QA/QC are well-disclosed, but true width is unknown.
Positive factors
- Strong intercept length of 49.4m with exceptional silver grade.
- Historical discovery hole, establishing initial mineralization.
- Good disclosure of metal equivalent assumptions and QA/QC.
Negative factors
- This is a historical result, reducing its novelty.
- True width is unknown, potentially overstating the actual thickness.
Evidence · text
“including 1.48% Cu Eq (0.28% Cu; 1.07 g/t Au; 3.42 g/t Ag) over 49.4m.”
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Stale Data Re-releasenegative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Why it applies: the fact restates a prior release
Incl.Treasure Island · copperGrade: 0.56Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.56
- Grade Unit
- %
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:23-24
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.56 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 0.6 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.56 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.56”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · goldGrade: 0.154Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.154
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:23-24
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.154 g/t gold is weak against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.154”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · silverGrade: 12.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 12.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 23 m
- To
- 24 m
- Intercept Depth
- 23 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:23-24
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 12.5 g/t·m is below.
Negative factors
- 12.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.5”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · copperGrade: 0.74Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.74
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 195 m
- To
- 195.7 m
- Intercept Depth
- 195 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:195-195.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.74 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 0.5 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.74 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.74”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · goldGrade: 0.019Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.019
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 195 m
- To
- 195.7 m
- Intercept Depth
- 195 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:195-195.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.019 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.019 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.019”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · silverGrade: 7.55Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 7.55
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 195 m
- To
- 195.7 m
- Intercept Depth
- 195 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:195-195.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.84
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 7.55 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.3 g/t·m is below.
Negative factors
- 7.55 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.55”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · copperGrade: 0.08Grade Unit: %Intercept: 24 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 24 m
- From
- 246 m
- To
- 270 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:246-270
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.08 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · goldGrade: 0.02Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 246 m
- To
- 270 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:246-270
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · silverGrade: 1.48Grade Unit: g/tIntercept: 24 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 24 m
- From
- 246 m
- To
- 270 m
- Intercept Depth
- 246 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:246-270
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.48 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 35.5 g/t·m is below.
Negative factors
- 1.48 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.48”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · copperGrade: 0.44Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 336.6 m
- To
- 337.3 m
- Intercept Depth
- 336.6 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:336.6-337.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.92
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.44 % copper is strong against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 0.3 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 0.44 % copper is strong on the porphyry deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.44”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · goldGrade: 0.316Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.316
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 336.6 m
- To
- 337.3 m
- Intercept Depth
- 336.6 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:336.6-337.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.92
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.316 g/t gold is moderate against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.2 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.316”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · silverGrade: 12.5Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 12.5
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 336.6 m
- To
- 337.3 m
- Intercept Depth
- 336.6 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:336.6-337.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.92
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 12.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.8 g/t·m is below.
Negative factors
- 12.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.5”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Withwe will be able to approach the anomaly from a better direction and more effectively test what we believe could be another significant target within the broader Crippleback · zincGrade: 1.26Grade Unit: %Intercept: 21.6 mView all detailsHide details
Identity
- Hole ID
- With
- Project
- we will be able to approach the anomaly from a better direction and more effectively test what we believe could be another significant target within the broader Crippleback
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.26
- Grade Unit
- %
- Intercept
- 21.6 m
- From
- 30.4 m
- To
- 52 m
- Hole Depth
- 500 m
- Intercept Depth
- 30.4 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- With:30.4-52
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.26 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 27.2 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.26”
Context: With
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · copperGrade: 0.09Grade Unit: %Intercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 12.1 m
- From
- 164.9 m
- To
- 177 m
- Hole Depth
- 500 m
- Intercept Depth
- 164.9 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:164.9-177
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 1.1 %·m is below.
Negative factors
- 0.09 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · goldGrade: 0.024Grade Unit: g/tIntercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.024
- Grade Unit
- g/t
- Intercept
- 12.1 m
- From
- 164.9 m
- To
- 177 m
- Hole Depth
- 500 m
- Intercept Depth
- 164.9 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:164.9-177
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.024 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.024 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.024”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · silverGrade: 0.77Grade Unit: g/tIntercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 12.1 m
- From
- 164.9 m
- To
- 177 m
- Hole Depth
- 500 m
- Intercept Depth
- 164.9 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:164.9-177
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.12
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.77 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.3 g/t·m is below.
Negative factors
- 0.77 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.77”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · copperGrade: 0.06Grade Unit: %Intercept: 35.4 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 35.4 m
- From
- 241.9 m
- To
- 277.3 m
- Hole Depth
- 500 m
- Intercept Depth
- 241.9 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:241.9-277.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 2.1 %·m is below.
Negative factors
- 0.06 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · goldGrade: 0.026Grade Unit: g/tIntercept: 35.4 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.026
- Grade Unit
- g/t
- Intercept
- 35.4 m
- From
- 241.9 m
- To
- 277.3 m
- Hole Depth
- 500 m
- Intercept Depth
- 241.9 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:241.9-277.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.026 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 0.026 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.026”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · silverGrade: 1.8Grade Unit: g/tIntercept: 35.4 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 35.4 m
- From
- 241.9 m
- To
- 277.3 m
- Hole Depth
- 500 m
- Intercept Depth
- 241.9 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:241.9-277.3
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 63.7 g/t·m is below.
Negative factors
- 1.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.80”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Withwe will be able to approach the anomaly from a better direction and more effectively test what we believe could be another significant target within the broader Crippleback · zincGrade: 0.52Grade Unit: %Intercept: 10.1 mView all detailsHide details
Identity
- Hole ID
- With
- Project
- we will be able to approach the anomaly from a better direction and more effectively test what we believe could be another significant target within the broader Crippleback
- Commodity
- zinc
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.52
- Grade Unit
- %
- Intercept
- 10.1 m
- From
- 240.9 m
- To
- 251 m
- Hole Depth
- 500 m
- Intercept Depth
- 240.9 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- With:240.9-251
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.52 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.3 %·m is below.
Negative factors
- 0.52 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.52”
Context: With
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · copperGrade: 0.21Grade Unit: %Intercept: 56.5 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 56.5 m
- From
- 149 m
- To
- 205.5 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:149-205.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 11.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · goldGrade: 0.184Grade Unit: g/tIntercept: 56.5 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.184
- Grade Unit
- g/t
- Intercept
- 56.5 m
- From
- 149 m
- To
- 205.5 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:149-205.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.184 g/t gold is weak against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 10.4 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.184”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · silverGrade: 2Grade Unit: g/tIntercept: 56.5 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 56.5 m
- From
- 149 m
- To
- 205.5 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:149-205.5
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 113.0 g/t·m is below.
Negative factors
- 2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.00”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · copperGrade: 0.24Grade Unit: %Intercept: 35.6 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 35.6 m
- From
- 157 m
- To
- 192.6 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:157-192.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.52
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 8.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · goldGrade: 0.238Grade Unit: g/tIntercept: 35.6 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.238
- Grade Unit
- g/t
- Intercept
- 35.6 m
- From
- 157 m
- To
- 192.6 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:157-192.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.52
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.238 g/t gold is weak against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 8.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.238”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Incl.Treasure Island · silverGrade: 2.06Grade Unit: g/tIntercept: 35.6 mView all detailsHide details
Identity
- Hole ID
- Incl.
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 2.06
- Grade Unit
- g/t
- Intercept
- 35.6 m
- From
- 157 m
- To
- 192.6 m
- Intercept Depth
- 157 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl.:157-192.6
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.52
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.06 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 73.3 g/t·m is below.
Negative factors
- 2.06 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.06”
Context: Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
And incl.Treasure Island · copperGrade: 0.26Grade Unit: %Intercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- And incl.
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 19.8 m
- From
- 292.2 m
- To
- 312 m
- Intercept Depth
- 292.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And incl.:292.2-312
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % copper is moderate against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 5.1 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: And incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
And incl.Treasure Island · goldGrade: 0.112Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- And incl.
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.112
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 292.2 m
- To
- 312 m
- Intercept Depth
- 292.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And incl.:292.2-312
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.112 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 2.2 g/t·m is below.
Negative factors
- 0.112 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.112”
Context: And incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
And incl.Treasure Island · silverGrade: 4.12Grade Unit: g/tIntercept: 19.8 mView all detailsHide details
Identity
- Hole ID
- And incl.
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 4.12
- Grade Unit
- g/t
- Intercept
- 19.8 m
- From
- 292.2 m
- To
- 312 m
- Intercept Depth
- 292.2 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And incl.:292.2-312
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.43
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 4.12 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 81.6 g/t·m is below.
Negative factors
- 4.12 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.12”
Context: And incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · copperGrade: 0.05Grade Unit: %Intercept: 25.7 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 25.7 m
- From
- 312 m
- To
- 337.7 m
- Hole Depth
- 500 m
- Intercept Depth
- 312 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:312-337.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 1.3 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · goldGrade: 0.047Grade Unit: g/tIntercept: 25.7 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.047
- Grade Unit
- g/t
- Intercept
- 25.7 m
- From
- 312 m
- To
- 337.7 m
- Hole Depth
- 500 m
- Intercept Depth
- 312 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:312-337.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.047 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 1.2 g/t·m is below.
Negative factors
- 0.047 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.047”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · silverGrade: 1.02Grade Unit: g/tIntercept: 25.7 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.02
- Grade Unit
- g/t
- Intercept
- 25.7 m
- From
- 312 m
- To
- 337.7 m
- Hole Depth
- 500 m
- Intercept Depth
- 312 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:312-337.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.11
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.02 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 26.2 g/t·m is below.
Negative factors
- 1.02 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.02”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · copperGrade: 0.07Grade Unit: %Intercept: 8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 8 m
- From
- 377.4 m
- To
- 385.4 m
- Hole Depth
- 500 m
- Intercept Depth
- 377.4 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:377.4-385.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.07 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · goldGrade: 0.054Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.054
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 377.4 m
- To
- 385.4 m
- Hole Depth
- 500 m
- Intercept Depth
- 377.4 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:377.4-385.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.054 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.054 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.054”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · silverGrade: 0.57Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.57
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 377.4 m
- To
- 385.4 m
- Hole Depth
- 500 m
- Intercept Depth
- 377.4 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:377.4-385.4
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.13
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.57 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.6 g/t·m is below.
Negative factors
- 0.57 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.57”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · copperGrade: 0.12Grade Unit: %Intercept: 72.7 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 72.7 m
- From
- 424 m
- To
- 496.7 m
- Hole Depth
- 500 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:424-496.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % copper is below against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 8.7 %·m is below.
Negative factors
- 0.12 % copper is below the weak threshold (0.15 %) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · goldGrade: 0.084Grade Unit: g/tIntercept: 72.7 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.084
- Grade Unit
- g/t
- Intercept
- 72.7 m
- From
- 424 m
- To
- 496.7 m
- Hole Depth
- 500 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:424-496.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.084 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 6.1 g/t·m is below.
Negative factors
- 0.084 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.084”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Andwithin the broader Crippleback · silverGrade: 1.65Grade Unit: g/tIntercept: 72.7 mView all detailsHide details
Identity
- Hole ID
- And
- Project
- within the broader Crippleback
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 1.65
- Grade Unit
- g/t
- Intercept
- 72.7 m
- From
- 424 m
- To
- 496.7 m
- Hole Depth
- 500 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- And:424-496.7
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 1.65 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 120.0 g/t·m is below.
Negative factors
- 1.65 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.65”
Context: And
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
InclTreasure Island · copperGrade: 0.17Grade Unit: %Intercept: 37 mView all detailsHide details
Identity
- Hole ID
- Incl
- Project
- Treasure Island
- Commodity
- copper
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 37 m
- From
- 424 m
- To
- 461 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl:424-461
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 % copper is weak against the porphyry deposit band [0.8, 0.4, 0.25, 0.15] %. Grade×width 6.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: Incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
InclTreasure Island · goldGrade: 0.121Grade Unit: g/tIntercept: 37 mView all detailsHide details
Identity
- Hole ID
- Incl
- Project
- Treasure Island
- Commodity
- gold
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 0.121
- Grade Unit
- g/t
- Intercept
- 37 m
- From
- 424 m
- To
- 461 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl:424-461
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 0.121 g/t gold is below against the porphyry deposit band [1, 0.5, 0.3, 0.15] g/t. Grade×width 4.5 g/t·m is below.
Negative factors
- 0.121 g/t gold is below the weak threshold (0.15 g/t) on the porphyry deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.121”
Context: Incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
InclTreasure Island · silverGrade: 2.32Grade Unit: g/tIntercept: 37 mView all detailsHide details
Identity
- Hole ID
- Incl
- Project
- Treasure Island
- Commodity
- silver
- Region
- canada_nl
- Reported Region
- canada_nl
- Ticker
- YARR
Geometry
- Grade
- 2.32
- Grade Unit
- g/t
- Intercept
- 37 m
- From
- 424 m
- To
- 461 m
- Intercept Depth
- 424 m
Classification
- Deposit Type
- porphyry
- Sample Type
- drill
- Group ID
- Incl:424-461
- Mining Method
- open_pit
QA/QC
- Laboratory
- ALS Canada Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- % Cu-Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-02T00:00:00.000Z
Reasoning: Expanded from assay table. 2.32 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 85.8 g/t·m is below.
Negative factors
- 2.32 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.32”
Context: Incl
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.