PPX Intercepts High-Grade Gold, Silver, and Copper at Callanquitas, Including 20.04 g/t Au over 0.85 m and 2251 g/t Ag With 3.0% Cu over 0.90 m
Original announcement by accesswire on
- Company
- PPX Mining Corp.
- Ticker
- PPX
- Exchange
- Unavailable
- Region
- northern Peru
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper
- Document categories
- Drill results
- Extracted
- 2026-09-15 15:33:45 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
PPX Mining Corp. announced high-grade gold, silver, and copper drill results from its 2026 underground program at the Callanquitas Mine in northern Peru. The drilling confirmed the continuity of the Tension vein and Callanquitas East zone, extending mineralization to the north, south, and at depth, and identified a new mineralized zone. Notable intercepts include 20.04 g/t Au over 0.85 m and 2251 g/t Ag with 3.0% Cu over 0.90 m, with results from one hole still pending.
Reasoning: PPX Mining Corp. reports high-grade gold, silver, and copper intercepts from its underground drilling program at Callanquitas, confirming continuity and extending mineralization at depth and along strike. The results include bonanza grades and indicate strong potential for resource growth, supported by comprehensive QA/QC.
Positive factors
- High-grade gold, silver, and copper intercepts
- Confirmation of geological continuity of Tension vein and Callanquitas East zone
- Extension of mineralization to north, south, and at depth
- Identification of a new mineralized zone
- Improved Au, Ag, and Cu grades compared to previous data
- Robust QA/QC protocols and QP sign-off
Negative factors
- Assay results pending for a significant portion of one hole
- True width not explicitly stated for intercepts
Facts used in scoring: 50
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 2251 g/t Ag with 3.0% Cu over 0.90 m in CA-26-31 and 20.04 g/t Au over 0.85 m in CA-26-33 are exceptionally high-grade for silver and gold respectively, well above the deposit-type norm for epithermal deposits.
Evidence · text
“20.04 g/t Au over 0.85 m and 2251 g/t Ag With 3.0% Cu over 0.90 m”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling program aims to extend the Callanquitas East zone and the Tension vein to the north, south, and at depth, indicating step-out drilling.
Evidence · text
“The current drilling campaign aims to extend the Callanquitas East zone and the Tension vein to the north, south, and at depth.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC protocols including sample collection, preparation, analysis by SGS Peru laboratory, and insertion of blanks, standards, and duplicates, with reanalysis by a second laboratory.
Evidence · text
“Core Sampling and QA/QC Protocols PPX geologists collect diamond drill core samples... Samples are sealed, labeled and stored in a secure area before shipment to SGS laboratories in Trujillo-Lima, Peru. ...Blanks, standards and duplicate are inserted approximately every 5 samples; Duplicate fire assay tests approximately every 30 samples and are sent to a second laboratory for reanalysis.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The reported intervals are given as downhole lengths (e.g., 'Length (m)*') without explicit true width or drill orientation information for all intercepts, meaning the apparent width may overstate true thickness.
Evidence · table
“Length (m)*”
Context: 3.20
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The release states that the three holes 'serve as twin and infill holes', indicating confirmatory drilling to raise resource confidence.
Evidence · text
“these three holes serve as twin and infill holes”
Extracted facts
Stored fact records: 50. Some facts used in scoring do not have a stored record.
Drill Results (50)
CA-26-31goldGrade: 2.21Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 2.21
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 56.7 m
- To
- 59.9 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:56.7-59.9
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a good gold grade over a moderate width, confirming mineralization in the Tension vein, which is positive for resource extension.
Positive factors
- Good gold grade for underground mining
- Confirmation of continuity in Tension vein
Negative factors
- Apparent width only
Evidence · table
“2.21”
Context: 3.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31silverGrade: 693.7Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 693.7
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 56.7 m
- To
- 59.9 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:56.7-59.9
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a high silver grade over a moderate width, contributing significantly to the overall value of the intercept.
Positive factors
- High silver grade for underground mining
- Confirmation of continuity in Tension vein
Negative factors
- Apparent width only
Evidence · table
“693.7”
Context: 3.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31copperGrade: 1.01Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.01
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 56.7 m
- To
- 59.9 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:56.7-59.9
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a good copper grade over a moderate width, adding to the polymetallic nature of the mineralization.
Positive factors
- Good copper grade for underground mining
- Confirmation of continuity in Tension vein
Negative factors
- Apparent width only
Evidence · table
“1.01”
Context: 3.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31goldGrade: 3.37Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 3.37
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 57.8 m
- To
- 59.4 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:57.8-59.4
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval demonstrates a higher-grade gold zone within the broader intercept, indicating strong mineralization.
Positive factors
- High-grade gold sub-interval
- Confirms high-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“3.37”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31silverGrade: 1329.6Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1329.6
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 57.8 m
- To
- 59.4 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:57.8-59.4
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows very high-grade silver, significantly enhancing the overall value of the intercept and indicating bonanza-grade potential.
Positive factors
- Very high-grade silver sub-interval
- Confirms high-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“1329.6”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31copperGrade: 1.81Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.81
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 57.8 m
- To
- 59.4 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:57.8-59.4
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a high-grade copper zone, adding significant value to the polymetallic intercept.
Positive factors
- High-grade copper sub-interval
- Confirms high-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“1.81”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31goldGrade: 5.84Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 5.84
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 57.8 m
- To
- 58.7 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:57.8-58.7
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This very high-grade gold sub-interval, though narrow, indicates bonanza-grade mineralization within the Tension vein.
Positive factors
- Exceptional gold grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“5.84”
Context: 0.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31silverGrade: 2251Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 2251
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 57.8 m
- To
- 58.7 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:57.8-58.7
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This bonanza-grade silver sub-interval is exceptionally high, indicating significant silver mineralization and contributing strongly to the overall value.
Positive factors
- Exceptional silver grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“2251.0”
Context: 0.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31copperGrade: 3.01Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 3.01
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 57.8 m
- To
- 58.7 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 56.7 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:57.8-58.7
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This very high-grade copper sub-interval adds significant value to the polymetallic intercept, indicating strong copper mineralization.
Positive factors
- Exceptional copper grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“3.01”
Context: 0.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31goldGrade: 5.28Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 5.28
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 111.9 m
- To
- 113.4 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 111.9 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:111.9-113.4
- Mining Method
- underground
Location
- Location
- New (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept represents a high-grade gold discovery in a new mineralized zone, which is highly novel and positive for exploration potential.
Positive factors
- High-grade gold in a new mineralized zone
- Indicates potential for additional mineralization
Negative factors
- Apparent width only
Evidence · table
“5.28”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31silverGrade: 10.4Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 10.4
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 111.9 m
- To
- 113.4 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 111.9 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:111.9-113.4
- Mining Method
- underground
Location
- Location
- New (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grades in a new mineralized zone, adding to the overall prospectivity.
Positive factors
- Silver mineralization in a new zone
Negative factors
- Apparent width only
- Moderate silver grade
Evidence · table
“10.4”
Context: 1.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31goldGrade: 1.5Grade Unit: g/tIntercept: 6.15 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 6.15 m
- From
- 222.6 m
- To
- 228.75 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 222.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:222.6-228.75
- Mining Method
- underground
Location
- Location
- Callanquitas East (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept confirms gold mineralization in the Callanquitas East zone over a moderate width, supporting continuity.
Positive factors
- Good gold grade over a moderate width
- Confirmation of continuity in Callanquitas East zone
Negative factors
- Apparent width only
Evidence · table
“1.50”
Context: 6.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31silverGrade: 12.6Grade Unit: g/tIntercept: 6.15 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 12.6
- Grade Unit
- g/t
- Intercept
- 6.15 m
- From
- 222.6 m
- To
- 228.75 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 222.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:222.6-228.75
- Mining Method
- underground
Location
- Location
- Callanquitas East (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows moderate silver grades in the Callanquitas East zone, contributing to the overall mineralization.
Positive factors
- Silver mineralization in Callanquitas East zone
Negative factors
- Apparent width only
- Moderate silver grade
Evidence · table
“12.6”
Context: 6.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31goldGrade: 2.37Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 2.37
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 222.6 m
- To
- 224.9 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 222.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:222.6-224.9
- Mining Method
- underground
Location
- Location
- Callanquitas East (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a good gold grade, indicating a higher-grade core within the Callanquitas East zone.
Positive factors
- Good gold grade sub-interval
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“2.37”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31silverGrade: 16.5Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 16.5
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 222.6 m
- To
- 224.9 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 222.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:222.6-224.9
- Mining Method
- underground
Location
- Location
- Callanquitas East (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver grades, contributing to the overall mineralization in the Callanquitas East zone.
Positive factors
- Silver mineralization in sub-interval
Negative factors
- Apparent width only
- Moderate silver grade
Evidence · table
“16.5”
Context: 2.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31goldGrade: 4.31Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 4.31
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 222.6 m
- To
- 223.2 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 222.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:222.6-223.2
- Mining Method
- underground
Location
- Location
- Callanquitas East (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, high-grade gold sub-interval indicates a strong gold presence within the Callanquitas East zone.
Positive factors
- High-grade gold sub-interval
- Confirms high-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“4.31”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-31silverGrade: 8Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-31
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 8
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 222.6 m
- To
- 223.2 m
- Hole Depth
- 259.2 m
- Intercept Depth
- 222.6 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-31:222.6-223.2
- Mining Method
- underground
Location
- Location
- Callanquitas East (oxides)
- Azimuth
- 41 °
- Dip
- -23 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver grades, contributing to the overall mineralization in the Callanquitas East zone.
Positive factors
- Silver mineralization in sub-interval
Negative factors
- Apparent width only
- Moderate silver grade
Evidence · table
“8.0”
Context: 0.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32goldGrade: 1.21Grade Unit: g/tIntercept: 16.75 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.21
- Grade Unit
- g/t
- Intercept
- 16.75 m
- From
- 82.4 m
- To
- 99.15 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-99.15
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a good gold grade over a significant width, confirming continuity and adding substantial volume to the Tension vein.
Positive factors
- Good gold grade over a significant width
- Confirmation of continuity in Tension vein
Negative factors
- Apparent width only
Evidence · table
“1.21”
Context: 16.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32silverGrade: 101.6Grade Unit: g/tIntercept: 16.75 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 101.6
- Grade Unit
- g/t
- Intercept
- 16.75 m
- From
- 82.4 m
- To
- 99.15 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-99.15
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a high silver grade over a significant width, contributing substantially to the overall value of the mineralization.
Positive factors
- High silver grade over a significant width
- Confirmation of continuity in Tension vein
Negative factors
- Apparent width only
Evidence · table
“101.6”
Context: 16.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32copperGrade: 0.14Grade Unit: %Intercept: 16.75 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 16.75 m
- From
- 82.4 m
- To
- 99.15 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-99.15
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows weak copper grades over a significant width, contributing to the polymetallic nature but at a lower economic impact.
Positive factors
- Copper mineralization over a significant width
Negative factors
- Apparent width only
- Weak copper grade
Evidence · table
“0.14”
Context: 16.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32goldGrade: 1.51Grade Unit: g/tIntercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.51
- Grade Unit
- g/t
- Intercept
- 12.1 m
- From
- 82.4 m
- To
- 94.5 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-94.5
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a good gold grade over a strong width, indicating a significant mineralized zone within the Tension vein.
Positive factors
- Good gold grade over a strong width
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“1.51”
Context: 12.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32silverGrade: 120Grade Unit: g/tIntercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 120
- Grade Unit
- g/t
- Intercept
- 12.1 m
- From
- 82.4 m
- To
- 94.5 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-94.5
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a high silver grade over a strong width, contributing significantly to the overall value of the mineralization.
Positive factors
- High silver grade over a strong width
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“120.0”
Context: 12.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32copperGrade: 0.19Grade Unit: %Intercept: 12.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 12.1 m
- From
- 82.4 m
- To
- 94.5 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-94.5
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate copper grades over a strong width, contributing to the polymetallic nature of the mineralization.
Positive factors
- Copper mineralization over a strong width
Negative factors
- Apparent width only
- Moderate copper grade
Evidence · table
“0.19”
Context: 12.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32goldGrade: 1.3Grade Unit: g/tIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.3
- Grade Unit
- g/t
- Intercept
- 6.6 m
- From
- 82.4 m
- To
- 89 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-89
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a good gold grade over a moderate width, indicating a mineralized zone within the Tension vein.
Positive factors
- Good gold grade over a moderate width
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“1.30”
Context: 6.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32silverGrade: 191.5Grade Unit: g/tIntercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 191.5
- Grade Unit
- g/t
- Intercept
- 6.6 m
- From
- 82.4 m
- To
- 89 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-89
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a high silver grade over a moderate width, contributing significantly to the overall value of the mineralization.
Positive factors
- High silver grade over a moderate width
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“191.5”
Context: 6.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32copperGrade: 0.34Grade Unit: %Intercept: 6.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 6.6 m
- From
- 82.4 m
- To
- 89 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-89
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a good copper grade over a moderate width, adding to the polymetallic nature of the mineralization.
Positive factors
- Good copper grade over a moderate width
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“0.34”
Context: 6.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32goldGrade: 6.92Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 6.92
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 82.4 m
- To
- 83.2 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-83.2
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, exceptionally high-grade gold sub-interval indicates bonanza-grade mineralization within the Tension vein.
Positive factors
- Exceptional gold grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“6.92”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32silverGrade: 654Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 654
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 82.4 m
- To
- 83.2 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-83.2
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, exceptionally high-grade silver sub-interval indicates bonanza-grade mineralization within the Tension vein.
Positive factors
- Exceptional silver grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“654.0”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32copperGrade: 1.69Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.69
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 82.4 m
- To
- 83.2 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 82.4 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:82.4-83.2
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, high-grade copper sub-interval adds significant value to the polymetallic mineralization within the Tension vein.
Positive factors
- High-grade copper sub-interval
- Confirms high-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“1.69”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32goldGrade: 0.99Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.99
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 213.2 m
- To
- 220.3 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 213.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:213.2-220.3
- Mining Method
- underground
Location
- Location
- Callanquitas East (Oxides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, confirming mineralization in the Callanquitas East zone.
Positive factors
- Moderate gold grade over a moderate width
- Confirmation of continuity in Callanquitas East zone
Negative factors
- Apparent width only
Evidence · table
“0.99”
Context: 7.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32silverGrade: 2.5Grade Unit: g/tIntercept: 7.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 7.1 m
- From
- 213.2 m
- To
- 220.3 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 213.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:213.2-220.3
- Mining Method
- underground
Location
- Location
- Callanquitas East (Oxides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows weak silver grades, contributing marginally to the overall mineralization in the Callanquitas East zone.
Positive factors
- Silver mineralization in Callanquitas East zone
Negative factors
- Apparent width only
- Weak silver grade
Evidence · table
“2.5”
Context: 7.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32goldGrade: 1.72Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 213.2 m
- To
- 216.5 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 213.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:213.2-216.5
- Mining Method
- underground
Location
- Location
- Callanquitas East (Oxides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a good gold grade, indicating a higher-grade core within the Callanquitas East zone.
Positive factors
- Good gold grade sub-interval
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“1.72”
Context: 3.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32silverGrade: 4.4Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 4.4
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 213.2 m
- To
- 216.5 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 213.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:213.2-216.5
- Mining Method
- underground
Location
- Location
- Callanquitas East (Oxides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows weak silver grades, contributing marginally to the overall mineralization in the Callanquitas East zone.
Positive factors
- Silver mineralization in sub-interval
Negative factors
- Apparent width only
- Weak silver grade
Evidence · table
“4.4”
Context: 3.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32goldGrade: 2.88Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 2.88
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 215.5 m
- To
- 216.5 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 213.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:215.5-216.5
- Mining Method
- underground
Location
- Location
- Callanquitas East (Oxides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, good-grade gold sub-interval indicates a stronger gold presence within the Callanquitas East zone.
Positive factors
- Good gold grade sub-interval
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“2.88”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-32silverGrade: 9.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CA-26-32
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 9.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 215.5 m
- To
- 216.5 m
- Hole Depth
- 255.9 m
- Intercept Depth
- 213.2 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-32:215.5-216.5
- Mining Method
- underground
Location
- Location
- Callanquitas East (Oxides)
- Azimuth
- 39 °
- Dip
- -30 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate silver grades, contributing to the overall mineralization in the Callanquitas East zone.
Positive factors
- Silver mineralization in sub-interval
Negative factors
- Apparent width only
- Moderate silver grade
Evidence · table
“9.9”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33goldGrade: 3.26Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 3.26
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 151 m
- To
- 161.6 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:151-161.6
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a high gold grade over a strong width, confirming continuity and adding substantial volume to the Tension vein.
Positive factors
- High gold grade over a strong width
- Confirmation of continuity in Tension vein
Negative factors
- Apparent width only
Evidence · table
“3.26”
Context: 10.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33silverGrade: 132.6Grade Unit: g/tIntercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 132.6
- Grade Unit
- g/t
- Intercept
- 10.6 m
- From
- 151 m
- To
- 161.6 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:151-161.6
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows a high silver grade over a strong width, contributing significantly to the overall value of the mineralization.
Positive factors
- High silver grade over a strong width
- Confirmation of continuity in Tension vein
Negative factors
- Apparent width only
Evidence · table
“132.6”
Context: 10.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33copperGrade: 0.04Grade Unit: %Intercept: 10.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 10.6 m
- From
- 151 m
- To
- 161.6 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:151-161.6
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This intercept shows weak copper grades over a strong width, contributing marginally to the polymetallic nature of the mineralization.
Positive factors
- Copper mineralization over a strong width
Negative factors
- Apparent width only
- Weak copper grade
Evidence · table
“0.04”
Context: 10.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33goldGrade: 8.66Grade Unit: g/tIntercept: 3.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 8.66
- Grade Unit
- g/t
- Intercept
- 3.6 m
- From
- 153.2 m
- To
- 156.8 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.2-156.8
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows an exceptionally high gold grade over a moderate width, indicating bonanza-grade mineralization within the Tension vein.
Positive factors
- Exceptional gold grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“8.66”
Context: 3.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33silverGrade: 289.6Grade Unit: g/tIntercept: 3.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 289.6
- Grade Unit
- g/t
- Intercept
- 3.6 m
- From
- 153.2 m
- To
- 156.8 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.2-156.8
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows an exceptionally high silver grade over a moderate width, contributing significantly to the overall value of the mineralization.
Positive factors
- Exceptional silver grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“289.6”
Context: 3.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33copperGrade: 0.1Grade Unit: %Intercept: 3.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3.6 m
- From
- 153.2 m
- To
- 156.8 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.2-156.8
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows weak copper grades, contributing marginally to the polymetallic nature of the mineralization.
Positive factors
- Copper mineralization in sub-interval
Negative factors
- Apparent width only
- Weak copper grade
Evidence · table
“0.10”
Context: 3.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33goldGrade: 14.15Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 14.15
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 153.2 m
- To
- 155.3 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.2-155.3
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows an exceptionally high gold grade, indicating bonanza-grade mineralization within the Tension vein.
Positive factors
- Exceptional gold grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“14.15”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33silverGrade: 147.9Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 147.9
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 153.2 m
- To
- 155.3 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.2-155.3
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a high silver grade, contributing significantly to the overall value of the mineralization.
Positive factors
- High silver grade for underground mining
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“147.9”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33copperGrade: 0.15Grade Unit: %Intercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.15
- Grade Unit
- %
- Intercept
- 2.1 m
- From
- 153.2 m
- To
- 155.3 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.2-155.3
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate copper grades, contributing to the polymetallic nature of the mineralization.
Positive factors
- Copper mineralization in sub-interval
Negative factors
- Apparent width only
- Moderate copper grade
Evidence · table
“0.15”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33goldGrade: 15.86Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 15.86
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 153.7 m
- To
- 155.3 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.7-155.3
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows an exceptionally high gold grade, indicating bonanza-grade mineralization within the Tension vein.
Positive factors
- Exceptional gold grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“15.86”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33silverGrade: 181.9Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 181.9
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 153.7 m
- To
- 155.3 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.7-155.3
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows a high silver grade, contributing significantly to the overall value of the mineralization.
Positive factors
- High silver grade for underground mining
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“181.9”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33copperGrade: 0.18Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 153.7 m
- To
- 155.3 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.7-155.3
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This sub-interval shows moderate copper grades, contributing to the polymetallic nature of the mineralization.
Positive factors
- Copper mineralization in sub-interval
Negative factors
- Apparent width only
- Moderate copper grade
Evidence · table
“0.18”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33goldGrade: 20.04Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- gold
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 20.04
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 153.7 m
- To
- 154.55 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.7-154.55
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, exceptionally high-grade gold sub-interval is a bonanza intercept, indicating very strong gold mineralization within the Tension vein.
Positive factors
- Exceptional gold grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“20.04”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33silverGrade: 240Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- silver
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 240
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 153.7 m
- To
- 154.55 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.7-154.55
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, exceptionally high-grade silver sub-interval indicates bonanza-grade mineralization within the Tension vein.
Positive factors
- Exceptional silver grade for underground mining
- Confirms bonanza-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“240.0”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
CA-26-33copperGrade: 0.27Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- CA-26-33
- Commodity
- copper
- Region
- peru
- Reported Region
- peru
- Ticker
- PPX
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 153.7 m
- To
- 154.55 m
- Hole Depth
- 262.4 m
- Intercept Depth
- 151 m
Classification
- Deposit Type
- epithermal
- Program
- mixed
- Sample Type
- drill
- Group ID
- CA-26-33:153.7-154.55
- Mining Method
- underground
Location
- Location
- Tension (Sulfides)
- Azimuth
- 39 °
- Dip
- -44 °
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Peru laboratory
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-15T00:00:00.000Z
Reasoning: This narrow, good-grade copper sub-interval adds to the polymetallic nature of the mineralization within the Tension vein.
Positive factors
- Good copper grade for underground mining
- Confirms higher-grade core within broader intercept
Negative factors
- Apparent width only
Evidence · table
“0.27”
Context: 0.85
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.