Rockhaven Ends 2022 Klaza Drill Program Reporting on a High Note
Original announcement by tmx on
- Company
- Rockhaven Resources Ltd.
- Ticker
- RK
- Exchange
- TSX
- Region
- Yukon
- Primary commodity
- Gold
- Secondary commodities
- Silver, Lead, Zinc
- Document categories
- Drill results
- Extracted
- 2026-09-18 19:15:52 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Rockhaven Resources has announced the final assay results from its 2022 diamond drilling program at the Klaza Project in Yukon, reporting high-grade gold and polymetallic intercepts. The program, which included both infill and exploration drilling, successfully met its objectives to advance the project towards an updated mineral resource estimate and pre-feasibility study. Notable results include 5.48 g/t gold and 128 g/t silver (7.00 g/t AuEq) over 5.85 m, and 25.90 g/t gold and 258 g/t silver (30.50 g/t AuEq) over 0.64 m. The company confirmed rigorous QA/QC procedures and QP sign-off, though true widths for some geotechnical holes are estimated.
Reasoning: The drill program successfully delivered numerous high-grade gold and polymetallic intercepts, with several exceeding the deposit average grade, and is on track to support resource upgrades and a pre-feasibility study. Comprehensive QA/QC procedures were followed, and a QP has approved the technical information. However, the lack of specific recovery assumptions for the metal equivalent calculation and the estimated nature of true widths for some intervals introduce minor uncertainties.
Positive factors
- High-grade gold and gold equivalent intercepts, some exceeding deposit average
- Program objectives on track to support resource upgrades and pre-feasibility study
- Comprehensive QA/QC disclosure and QP sign-off
- Infill drilling successfully confirmed and expanded mineralization
- Exploration drilling identified potential extensions
Negative factors
- Metal equivalent assumptions include 'variable recoveries' which are not specified, reducing transparency
- True widths for geotechnical holes are unknown and estimated to be significantly less than reported downhole lengths
- Some individual metal grades (Ag, Pb, Zn) are below prior project averages for those metals, despite good AuEq
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 474
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release explicitly states that analyses were performed by ALS Minerals, rigorous procedures were in place for sample collection, chain of custody, and data entry, and certified assay standards, coarse reject duplicates, field duplicates, and blanks were routinely inserted.
Evidence · text
“All analyses for rock and core samples from the 2022 program were performed by ALS Minerals with sample preparation in Whitehorse, Yukon and Windsor, Ontario and assays and geochemical analyses in North Vancouver. Core samples were routinely analyzed for gold by fire assay followed by atomic absorption (Au-AA24) and 48 other elements by inductively coupled plasma-mass spectrometry (ME-MS61). Samples that exceeded the detection limits of the routine methods were assayed for silver, copper, lead and zinc by inductively coupled plasma-atomic emission spectroscopy (Ag/Cu/Pb/Zn - OG62) and gold by gravimetric analysis (Au-GRA22). Rigorous procedures were in place regarding sample collection, chain of custody and data entry. Certified assay standards, coarse reject duplicates, field duplicates and blanks were routinely inserted into the sample stream to ensure integrity of the assay process. All of the results reported have passed the QA/QC screening.”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Technical information in this news release has been approved by Matthew R. Dumala, P.Eng., a geological engineer with Archer, Cathro & Associates (1981) Limited and qualified person for the purpose of National Instrument 43-101.
Evidence · text
“Technical information in this news release has been approved by Matthew R. Dumala, P.Eng., a geological engineer with Archer, Cathro & Associates (1981) Limited and qualified person for the purpose of National Instrument 43-101.”
Metal Equivalent Opaquenegative
Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent.
Why it applies: The gold equivalent calculation uses 'variable recoveries for the different metals' which are not specified, making the assumptions incomplete.
Evidence · text
“Gold equivalent (AuEq) values assume $1,800/oz Au, $22/oz Ag, $1.05/lb Pb, and $1.60/lb Zn, and variable recoveries for the different metals. The equation used is AuEq=1*Au+Ag/103.42+Pb/4.64+Zn/3.63”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The program objectives included 're-categorization of prioritized inferred mineral resources into indicated mineral resources' and 'twenty-one in-fill holes were completed at the Central Klaza Zone'.
Evidence · text
“The work program was designed to advance Klaza towards an updated mineral resource estimate 1 and pre-feasibility study by attaining the following objectives: (1) re-categorization of prioritized inferred mineral resources into indicated mineral resources; (2) expansion of the total mineral resource; (3) collection of samples for advanced-stage metallurgical test work; (4) completion of additional geotechnical drilling for optimized open-pit and underground engineering; and, (5) evaluation of some of the exploration targets that lie outside of the known mineral resource areas through excavator trenching, soil sampling and prospecting.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The program included 'evaluation of some of the exploration targets that lie outside of the known mineral resource areas' and 'Two exploration drill holes targeted the potential eastern projection of the Western BRX Extension target'.
Evidence · text
“The work program was designed to advance Klaza towards an updated mineral resource estimate 1 and pre-feasibility study by attaining the following objectives: (1) re-categorization of prioritized inferred mineral resources into indicated mineral resources; (2) expansion of the total mineral resource; (3) collection of samples for advanced-stage metallurgical test work; (4) completion of additional geotechnical drilling for optimized open-pit and underground engineering; and, (5) evaluation of some of the exploration targets that lie outside of the known mineral resource areas through excavator trenching, soil sampling and prospecting.”
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: The document states that true widths are estimated to be 80-90% of the interval for the main drill results, indicating an attempt to provide true width information.
Evidence · text
“True widths are estimated to be 80-90% of the interval as the majority of vein intersects had contacts that were at or near perpendicular to core axis.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: For the geotechnical holes, the document explicitly states 'True widths are unknown at this time but estimated to be 20-40% of the interval', indicating that only apparent widths are reported.
Evidence · text
“True widths are unknown at this time but estimated to be 20-40% of the interval.”
Extracted facts
Stored fact records: 474. Some facts used in scoring do not have a stored record.
Drill Results (474)
KL-22-583Klaza · goldGrade: 0.64Grade Unit: g/tIntercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.64
- Grade Unit
- g/t
- Intercept
- 0.63 m
- From
- 36.81 m
- To
- 37.44 m
- Intercept Depth
- 36.81 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:36.81-37.44
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.49
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is below the weak threshold for open pit mining (0.3 g/t) but still low, and the interval is narrow. The AuEq grade is moderate.
Negative factors
- Gold grade is weak (0.64 g/t Au)
Evidence · table
“0.64”
Context: 0.63
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · silverGrade: 259Grade Unit: g/tIntercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 259
- Grade Unit
- g/t
- Intercept
- 0.63 m
- From
- 36.81 m
- To
- 37.44 m
- Intercept Depth
- 36.81 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:36.81-37.44
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.49
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average and falls within the weak tier for silver, and the interval is narrow.
Negative factors
- Silver grade is below the project's prior average and below the weak threshold for silver (30 g/t) but not significantly high for a narrow interval.
Evidence · table
“259.0”
Context: 0.63
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · leadGrade: 1.18Grade Unit: %Intercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.18
- Grade Unit
- %
- Intercept
- 0.63 m
- From
- 36.81 m
- To
- 37.44 m
- Intercept Depth
- 36.81 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:36.81-37.44
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.49
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls within the weak tier for lead, and the interval is narrow.
Negative factors
- Lead grade is well below the project's prior average and falls within the weak tier for lead (1%).
Evidence · table
“1.18”
Context: 0.63
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · zincGrade: 0.36Grade Unit: %Intercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 0.63 m
- From
- 36.81 m
- To
- 37.44 m
- Intercept Depth
- 36.81 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:36.81-37.44
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.49
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.36”
Context: 0.63
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · goldGrade: 2.9Grade Unit: g/tIntercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:78.02-78.58
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.91
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong (2.9 g/t Au) for an open pit scenario, but the interval is very narrow. The AuEq grade is also strong.
Evidence · table
“2.90”
Context: 0.56
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · silverGrade: 184Grade Unit: g/tIntercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 184
- Grade Unit
- g/t
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:78.02-78.58
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.91
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“184.0”
Context: 0.56
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · leadGrade: 0.49Grade Unit: %Intercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:78.02-78.58
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.91
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.49”
Context: 0.56
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · zincGrade: 0.45Grade Unit: %Intercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:78.02-78.58
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.91
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.45”
Context: 0.56
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · goldGrade: 0.27Grade Unit: g/tIntercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:92.9-94.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.54
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is below the weak threshold for open pit mining, but the AuEq grade is moderate.
Negative factors
- Gold grade is below the weak threshold for open pit mining (0.3 g/t Au).
Evidence · table
“0.27”
Context: 1.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · silverGrade: 318Grade Unit: g/tIntercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 318
- Grade Unit
- g/t
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:92.9-94.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.54
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver.
Negative factors
- Silver grade is below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“318.0”
Context: 1.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · leadGrade: 0.36Grade Unit: %Intercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:92.9-94.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.54
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.36”
Context: 1.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-583Klaza · zincGrade: 0.42Grade Unit: %Intercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- KL-22-583
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-583:92.9-94.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.54
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.42”
Context: 1.34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · goldGrade: 1.26Grade Unit: g/tIntercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 0.93 m
- From
- 63.43 m
- To
- 64.36 m
- Intercept Depth
- 63.43 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:63.43-64.36
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is moderate (1.26 g/t Au) for an open pit scenario, but the interval is very narrow.
Evidence · table
“1.26”
Context: 0.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · silverGrade: 6.7Grade Unit: g/tIntercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.7
- Grade Unit
- g/t
- Intercept
- 0.93 m
- From
- 63.43 m
- To
- 64.36 m
- Intercept Depth
- 63.43 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:63.43-64.36
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average and falls below the weak tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is well below the project's prior average and below the weak threshold for silver (30 g/t).
Evidence · table
“6.7”
Context: 0.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · leadGrade: 0.04Grade Unit: %Intercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 0.93 m
- From
- 63.43 m
- To
- 64.36 m
- Intercept Depth
- 63.43 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:63.43-64.36
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.04”
Context: 0.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · zincGrade: 0.1Grade Unit: %Intercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.93 m
- From
- 63.43 m
- To
- 64.36 m
- Intercept Depth
- 63.43 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:63.43-64.36
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.35
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.10”
Context: 0.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · goldGrade: 2.14Grade Unit: g/tIntercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.14
- Grade Unit
- g/t
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:100.79-101.62
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong (2.14 g/t Au) for an open pit scenario, but the interval is very narrow. The AuEq grade is also strong.
Evidence · table
“2.14”
Context: 0.83
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · silverGrade: 33.8Grade Unit: g/tIntercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 33.8
- Grade Unit
- g/t
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:100.79-101.62
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the weak tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“33.8”
Context: 0.83
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · leadGrade: 0.27Grade Unit: %Intercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:100.79-101.62
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.27”
Context: 0.83
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · zincGrade: 0.12Grade Unit: %Intercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:100.79-101.62
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.12”
Context: 0.83
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · goldGrade: 4.9Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.9
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:148.79-149.59
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong for an open pit scenario, and the AuEq grade is exceptional, but the interval is very narrow.
Positive factors
- Gold grade is strong (4.9 g/t Au) for an open pit scenario, approaching exceptional.
Evidence · table
“4.90”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · silverGrade: 102Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 102
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:148.79-149.59
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the moderate threshold for silver (100 g/t).
Evidence · table
“102.0”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · leadGrade: 0.34Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:148.79-149.59
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.34”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-584Klaza · zincGrade: 0.97Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- KL-22-584
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.97
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-584:148.79-149.59
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 6.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.97”
Context: 0.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · goldGrade: 4.66Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.66
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 76.16 m
- To
- 76.66 m
- Intercept Depth
- 76.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:76.16-76.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong for an open pit scenario, and the AuEq grade is exceptional, but the interval is very narrow.
Positive factors
- Gold grade is strong (4.66 g/t Au) for an open pit scenario, approaching exceptional.
Evidence · table
“4.66”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · silverGrade: 19.5Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 19.5
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 76.16 m
- To
- 76.66 m
- Intercept Depth
- 76.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:76.16-76.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average and falls below the weak tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is well below the project's prior average and below the weak threshold for silver (30 g/t).
Evidence · table
“19.5”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · leadGrade: 0.07Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 76.16 m
- To
- 76.66 m
- Intercept Depth
- 76.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:76.16-76.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.07”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · zincGrade: 2.08Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.08
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 76.16 m
- To
- 76.66 m
- Intercept Depth
- 76.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:76.16-76.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is below the project's prior average but falls within the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is below the project's prior average but falls within the weak tier for zinc (2%).
Evidence · table
“2.08”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · goldGrade: 2.02Grade Unit: g/tIntercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.02
- Grade Unit
- g/t
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:132.45-133.46
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.07
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong (2.02 g/t Au) for an open pit scenario, but the interval is narrow. The AuEq grade is also strong.
Evidence · table
“2.02”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · silverGrade: 3.3Grade Unit: g/tIntercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:132.45-133.46
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.07
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average and falls below the weak tier for silver, and the interval is narrow.
Negative factors
- Silver grade is well below the project's prior average and below the weak threshold for silver (30 g/t).
Evidence · table
“3.3”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · leadGrade: 0.02Grade Unit: %Intercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:132.45-133.46
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.07
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.02”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-585Klaza · zincGrade: 0.05Grade Unit: %Intercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- KL-22-585
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-585:132.45-133.46
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.07
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.05”
Context: 1.01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · goldGrade: 0.11Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 12.65 m
- To
- 13.35 m
- Intercept Depth
- 12.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:12.65-13.35
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is below the weak threshold for open pit mining, but the AuEq grade is strong.
Negative factors
- Gold grade is below the weak threshold for open pit mining (0.3 g/t Au).
Evidence · table
“0.11”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · silverGrade: 187Grade Unit: g/tIntercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 187
- Grade Unit
- g/t
- Intercept
- 0.7 m
- From
- 12.65 m
- To
- 13.35 m
- Intercept Depth
- 12.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:12.65-13.35
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the moderate threshold for silver (100 g/t).
Evidence · table
“187.0”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · leadGrade: 0.32Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 12.65 m
- To
- 13.35 m
- Intercept Depth
- 12.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:12.65-13.35
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.32”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · zincGrade: 0.51Grade Unit: %Intercept: 0.7 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 0.7 m
- From
- 12.65 m
- To
- 13.35 m
- Intercept Depth
- 12.65 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:12.65-13.35
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.13
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.51”
Context: 0.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · goldGrade: 4.06Grade Unit: g/tIntercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.06
- Grade Unit
- g/t
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:19-20.07
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong for an open pit scenario, and the AuEq grade is exceptional, but the interval is narrow.
Positive factors
- Gold grade is strong (4.06 g/t Au) for an open pit scenario.
Evidence · table
“4.06”
Context: 1.07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · silverGrade: 234Grade Unit: g/tIntercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 234
- Grade Unit
- g/t
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:19-20.07
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is narrow.
Negative factors
- Silver grade is below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“234.0”
Context: 1.07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · leadGrade: 0.54Grade Unit: %Intercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:19-20.07
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.54”
Context: 1.07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-586Klaza · zincGrade: 3.18Grade Unit: %Intercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- KL-22-586
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.18
- Grade Unit
- %
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-586:19-20.07
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.31
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is below the project's prior average but falls within the weak tier for zinc, and the interval is narrow.
Negative factors
- Zinc grade is below the project's prior average but falls within the weak tier for zinc (2%).
Evidence · table
“3.18”
Context: 1.07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · goldGrade: 3.65Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.65
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 16.16 m
- To
- 16.66 m
- Intercept Depth
- 16.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:16.16-16.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong for an open pit scenario, and the AuEq grade is exceptional, but the interval is very narrow.
Positive factors
- Gold grade is strong (3.65 g/t Au) for an open pit scenario.
Evidence · table
“3.65”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · silverGrade: 101Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 101
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 16.16 m
- To
- 16.66 m
- Intercept Depth
- 16.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:16.16-16.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the moderate threshold for silver (100 g/t).
Evidence · table
“101.0”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · leadGrade: 1.59Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.59
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 16.16 m
- To
- 16.66 m
- Intercept Depth
- 16.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:16.16-16.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average but falls within the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average but falls within the weak tier for lead (1%).
Evidence · table
“1.59”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · zincGrade: 3.16Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.16
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 16.16 m
- To
- 16.66 m
- Intercept Depth
- 16.16 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:16.16-16.66
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.84
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is below the project's prior average but falls within the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is below the project's prior average but falls within the weak tier for zinc (2%).
Evidence · table
“3.16”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · goldGrade: 1.88Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.88
- Grade Unit
- g/t
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:37.49-37.94
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.89
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong (1.88 g/t Au) for an open pit scenario, but the interval is very narrow. The AuEq grade is exceptional.
Evidence · table
“1.88”
Context: 0.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · silverGrade: 330Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 330
- Grade Unit
- g/t
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:37.49-37.94
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.89
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the strong tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the strong threshold for silver (200 g/t).
Evidence · table
“330.0”
Context: 0.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · leadGrade: 1.75Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.75
- Grade Unit
- %
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:37.49-37.94
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.89
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average but falls within the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average but falls within the weak tier for lead (1%).
Evidence · table
“1.75”
Context: 0.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · zincGrade: 1.61Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.61
- Grade Unit
- %
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:37.49-37.94
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.89
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“1.61”
Context: 0.45
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · goldGrade: 0.27Grade Unit: g/tIntercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:57.11-58.75
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is below the weak threshold for open pit mining, but the AuEq grade is strong.
Negative factors
- Gold grade is below the weak threshold for open pit mining (0.3 g/t Au).
Evidence · table
“0.27”
Context: 1.64
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · silverGrade: 176.2Grade Unit: g/tIntercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 176.2
- Grade Unit
- g/t
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:57.11-58.75
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver.
Negative factors
- Silver grade is below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“176.2”
Context: 1.64
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · leadGrade: 0.55Grade Unit: %Intercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:57.11-58.75
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.55”
Context: 1.64
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-587Klaza · zincGrade: 0.83Grade Unit: %Intercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- KL-22-587
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.83
- Grade Unit
- %
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-587:57.11-58.75
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.83”
Context: 1.64
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · goldGrade: 2.34Grade Unit: g/tIntercept: 1.23 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.34
- Grade Unit
- g/t
- Intercept
- 1.23 m
- From
- 81.26 m
- To
- 82.49 m
- Intercept Depth
- 81.26 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:81.26-82.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong (2.34 g/t Au) for an open pit scenario, and the AuEq grade is strong.
Evidence · table
“2.34”
Context: 1.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · silverGrade: 84.6Grade Unit: g/tIntercept: 1.23 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 84.6
- Grade Unit
- g/t
- Intercept
- 1.23 m
- From
- 81.26 m
- To
- 82.49 m
- Intercept Depth
- 81.26 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:81.26-82.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average but falls within the weak tier for silver.
Negative factors
- Silver grade is well below the project's prior average and falls within the weak tier for silver (30 g/t).
Evidence · table
“84.6”
Context: 1.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · leadGrade: 0.09Grade Unit: %Intercept: 1.23 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.23 m
- From
- 81.26 m
- To
- 82.49 m
- Intercept Depth
- 81.26 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:81.26-82.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.09”
Context: 1.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · zincGrade: 0.39Grade Unit: %Intercept: 1.23 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 1.23 m
- From
- 81.26 m
- To
- 82.49 m
- Intercept Depth
- 81.26 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:81.26-82.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.39”
Context: 1.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · goldGrade: 3.26Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.26
- Grade Unit
- g/t
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:119.83-120.69
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.19
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong for an open pit scenario, and the AuEq grade is strong, but the interval is very narrow.
Positive factors
- Gold grade is strong (3.26 g/t Au) for an open pit scenario.
Evidence · table
“3.26”
Context: 0.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · silverGrade: 53.3Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 53.3
- Grade Unit
- g/t
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:119.83-120.69
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.19
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average but falls within the weak tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is well below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“53.3”
Context: 0.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · leadGrade: 0.76Grade Unit: %Intercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:119.83-120.69
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.19
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.76”
Context: 0.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · zincGrade: 0.91Grade Unit: %Intercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.91
- Grade Unit
- %
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:119.83-120.69
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 4.19
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.91”
Context: 0.86
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · goldGrade: 5.94Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.94
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:129-129.3
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 17.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Exceptional gold and AuEq grades, but the interval is very narrow.
Positive factors
- Gold grade is exceptional (5.94 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (17.22 g/t AuEq).
Evidence · table
“5.94”
Context: 0.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · silverGrade: 753Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 753
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:129-129.3
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 17.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is strong, but below the project's prior average, and the interval is very narrow.
Positive factors
- Silver grade is strong (753 g/t Ag), approaching exceptional.
Negative factors
- Silver grade is below the project's prior average.
Evidence · table
“753.0”
Context: 0.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · leadGrade: 16.75Grade Unit: %Intercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 16.75
- Grade Unit
- %
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:129-129.3
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 17.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Exceptional lead grade, above the project's prior average, but the interval is very narrow.
Positive factors
- Lead grade is exceptional (16.75%) and above the project's prior average.
Evidence · table
“16.75”
Context: 0.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · zincGrade: 1.43Grade Unit: %Intercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.43
- Grade Unit
- %
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:129-129.3
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 17.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“1.43”
Context: 0.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · goldGrade: 5.01Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.01
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:176.45-177
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Exceptional gold and AuEq grades, but the interval is very narrow.
Positive factors
- Gold grade is exceptional (5.01 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (7.32 g/t AuEq).
Evidence · table
“5.01”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · silverGrade: 190Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 190
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:176.45-177
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“190.0”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · leadGrade: 0.59Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.59
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:176.45-177
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.59”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · zincGrade: 1.28Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:176.45-177
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 7.32
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“1.28”
Context: 0.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · goldGrade: 1.56Grade Unit: g/tIntercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.56
- Grade Unit
- g/t
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:192.92-194.18
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.01
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is moderate (1.56 g/t Au) for an open pit scenario, but the AuEq grade is exceptional.
Evidence · table
“1.56”
Context: 1.26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · silverGrade: 251Grade Unit: g/tIntercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 251
- Grade Unit
- g/t
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:192.92-194.18
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.01
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is strong, but below the project's prior average.
Positive factors
- Silver grade is strong (251 g/t Ag).
Negative factors
- Silver grade is below the project's prior average.
Evidence · table
“251.0”
Context: 1.26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · leadGrade: 2.8Grade Unit: %Intercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.8
- Grade Unit
- %
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:192.92-194.18
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.01
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average but falls within the weak tier for lead.
Negative factors
- Lead grade is well below the project's prior average but falls within the weak tier for lead (1%).
Evidence · table
“2.80”
Context: 1.26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-588Klaza · zincGrade: 1.53Grade Unit: %Intercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- KL-22-588
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.53
- Grade Unit
- %
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-588:192.92-194.18
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.01
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“1.53”
Context: 1.26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · goldGrade: 2.67Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.67
- Grade Unit
- g/t
- Intercept
- 0.66 m
- From
- 122.32 m
- To
- 122.98 m
- Intercept Depth
- 122.32 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:122.32-122.98
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is strong (2.67 g/t Au) for an open pit scenario, and the AuEq grade is strong, but the interval is very narrow.
Evidence · table
“2.67”
Context: 0.66
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · silverGrade: 55.2Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 55.2
- Grade Unit
- g/t
- Intercept
- 0.66 m
- From
- 122.32 m
- To
- 122.98 m
- Intercept Depth
- 122.32 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:122.32-122.98
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average but falls within the weak tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is well below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“55.2”
Context: 0.66
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · leadGrade: 0.78Grade Unit: %Intercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 0.66 m
- From
- 122.32 m
- To
- 122.98 m
- Intercept Depth
- 122.32 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:122.32-122.98
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.78”
Context: 0.66
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · zincGrade: 0.64Grade Unit: %Intercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.64
- Grade Unit
- %
- Intercept
- 0.66 m
- From
- 122.32 m
- To
- 122.98 m
- Intercept Depth
- 122.32 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:122.32-122.98
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.64”
Context: 0.66
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · goldGrade: 6.6Grade Unit: g/tIntercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.6
- Grade Unit
- g/t
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:170.78-171.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 12.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Exceptional gold and AuEq grades, but the interval is very narrow.
Positive factors
- Gold grade is exceptional (6.6 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (12.66 g/t AuEq).
Evidence · table
“6.60”
Context: 0.46
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · silverGrade: 439Grade Unit: g/tIntercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 439
- Grade Unit
- g/t
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:170.78-171.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 12.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is strong, but below the project's prior average, and the interval is very narrow.
Positive factors
- Silver grade is strong (439 g/t Ag).
Negative factors
- Silver grade is below the project's prior average.
Evidence · table
“439.0”
Context: 0.46
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · leadGrade: 2.57Grade Unit: %Intercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.57
- Grade Unit
- %
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:170.78-171.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 12.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average but falls within the strong tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average but falls within the strong tier for lead (6%).
Evidence · table
“2.57”
Context: 0.46
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · zincGrade: 4.79Grade Unit: %Intercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.79
- Grade Unit
- %
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:170.78-171.24
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 12.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is above the project's prior average and falls within the weak tier for zinc, and the interval is very narrow.
Positive factors
- Zinc grade is above the project's prior average and falls within the weak tier for zinc (2%).
Evidence · table
“4.79”
Context: 0.46
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · goldGrade: 1.5Grade Unit: g/tIntercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:185.33-186.39
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.96
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is moderate (1.5 g/t Au) for an open pit scenario, and the AuEq grade is strong.
Evidence · table
“1.50”
Context: 1.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · silverGrade: 26.8Grade Unit: g/tIntercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 26.8
- Grade Unit
- g/t
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:185.33-186.39
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.96
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average and falls below the weak tier for silver.
Negative factors
- Silver grade is well below the project's prior average and below the weak threshold for silver (30 g/t).
Evidence · table
“26.8”
Context: 1.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · leadGrade: 0.26Grade Unit: %Intercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:185.33-186.39
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.96
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.26”
Context: 1.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · zincGrade: 0.54Grade Unit: %Intercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:185.33-186.39
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.96
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.54”
Context: 1.06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · goldGrade: 2.71Grade Unit: g/tIntercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.71
- Grade Unit
- g/t
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:247.47-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Strong gold grade and exceptional AuEq grade over a moderate interval.
Positive factors
- Gold grade is strong (2.71 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (5.28 g/t AuEq).
Evidence · table
“2.71”
Context: 3.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · silverGrade: 214.2Grade Unit: g/tIntercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 214.2
- Grade Unit
- g/t
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:247.47-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is strong, but below the project's prior average, over a moderate interval.
Positive factors
- Silver grade is strong (214.2 g/t Ag).
Negative factors
- Silver grade is below the project's prior average.
Evidence · table
“214.2”
Context: 3.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · leadGrade: 1.21Grade Unit: %Intercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.21
- Grade Unit
- %
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:247.47-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average but falls within the weak tier for lead, over a moderate interval.
Negative factors
- Lead grade is well below the project's prior average but falls within the weak tier for lead (1%).
Evidence · table
“1.21”
Context: 3.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · zincGrade: 0.87Grade Unit: %Intercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:247.47-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 5.28
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, over a moderate interval.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.87”
Context: 3.93
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · goldGrade: 4.27Grade Unit: g/tIntercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.27
- Grade Unit
- g/t
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:249.09-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Strong gold grade and exceptional AuEq grade over a narrow included interval.
Positive factors
- Gold grade is strong (4.27 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (8.44 g/t AuEq).
Evidence · table
“4.27”
Context: 2.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · silverGrade: 351.6Grade Unit: g/tIntercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 351.6
- Grade Unit
- g/t
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:249.09-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is strong, but below the project's prior average, over a narrow included interval.
Positive factors
- Silver grade is strong (351.6 g/t Ag).
Negative factors
- Silver grade is below the project's prior average.
Evidence · table
“351.6”
Context: 2.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · leadGrade: 1.91Grade Unit: %Intercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.91
- Grade Unit
- %
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:249.09-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average but falls within the weak tier for lead, over a narrow included interval.
Negative factors
- Lead grade is well below the project's prior average but falls within the weak tier for lead (1%).
Evidence · table
“1.91”
Context: 2.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-590Klaza · zincGrade: 1.34Grade Unit: %Intercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- KL-22-590
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-590:249.09-251.4
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 8.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, over a narrow included interval.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“1.34”
Context: 2.31
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · goldGrade: 1.38Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 70.72 m
- To
- 71.22 m
- Intercept Depth
- 70.72 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:70.72-71.22
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.64
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is moderate (1.38 g/t Au) for an open pit scenario, but the interval is very narrow. The AuEq grade is strong.
Evidence · table
“1.38”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · silverGrade: 111Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 111
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 70.72 m
- To
- 71.22 m
- Intercept Depth
- 70.72 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:70.72-71.22
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.64
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the moderate threshold for silver (100 g/t).
Evidence · table
“111.0”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · leadGrade: 0.14Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 70.72 m
- To
- 71.22 m
- Intercept Depth
- 70.72 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:70.72-71.22
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.64
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.14”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · zincGrade: 0.6Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.6
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 70.72 m
- To
- 71.22 m
- Intercept Depth
- 70.72 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:70.72-71.22
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 2.64
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.60”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · goldGrade: 9.35Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 9.35
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:102.35-102.85
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Exceptional gold and AuEq grades, but the interval is very narrow.
Positive factors
- Gold grade is exceptional (9.35 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (11.56 g/t AuEq).
Evidence · table
“9.35”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · silverGrade: 118Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 118
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:102.35-102.85
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the moderate threshold for silver (100 g/t).
Evidence · table
“118.0”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · leadGrade: 1.22Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.22
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:102.35-102.85
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average but falls within the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average but falls within the weak tier for lead (1%).
Evidence · table
“1.22”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · zincGrade: 2.93Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.93
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:102.35-102.85
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 11.56
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is below the project's prior average but falls within the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is below the project's prior average but falls within the weak tier for zinc (2%).
Evidence · table
“2.93”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · goldGrade: 11.8Grade Unit: g/tIntercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 11.8
- Grade Unit
- g/t
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:110.48-111.25
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 13.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Exceptional gold and AuEq grades, but the interval is very narrow.
Positive factors
- Gold grade is exceptional (11.8 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (13.2 g/t AuEq).
Evidence · table
“11.80”
Context: 0.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · silverGrade: 106Grade Unit: g/tIntercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 106
- Grade Unit
- g/t
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:110.48-111.25
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 13.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the moderate threshold for silver (100 g/t).
Evidence · table
“106.0”
Context: 0.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · leadGrade: 0.44Grade Unit: %Intercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:110.48-111.25
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 13.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.44”
Context: 0.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · zincGrade: 1.02Grade Unit: %Intercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.02
- Grade Unit
- %
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:110.48-111.25
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 13.2
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“1.02”
Context: 0.77
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · goldGrade: 1.03Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:172.61-173.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is moderate (1.03 g/t Au) for an open pit scenario, but the interval is very narrow. The AuEq grade is moderate.
Evidence · table
“1.03”
Context: 0.88
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · silverGrade: 5.3Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.3
- Grade Unit
- g/t
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:172.61-173.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is well below the project's prior average and falls below the weak tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is well below the project's prior average and below the weak threshold for silver (30 g/t).
Evidence · table
“5.3”
Context: 0.88
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · leadGrade: 0.07Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:172.61-173.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average and falls below the weak tier for lead (1%).
Evidence · table
“0.07”
Context: 0.88
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-592Klaza · zincGrade: 0.19Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- KL-22-592
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-592:172.61-173.49
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 1.14
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.19”
Context: 0.88
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-594Klaza · goldGrade: 0.92Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-594
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 36.17 m
- To
- 36.67 m
- Intercept Depth
- 36.17 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-594:36.17-36.67
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Gold grade is below the moderate threshold for open pit mining, but the AuEq grade is strong, and the interval is very narrow.
Negative factors
- Gold grade is below the moderate threshold for open pit mining (1 g/t Au).
Evidence · table
“0.92”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-594Klaza · silverGrade: 175Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-594
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 175
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 36.17 m
- To
- 36.67 m
- Intercept Depth
- 36.17 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-594:36.17-36.67
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is below the project's prior average but falls within the moderate tier for silver, and the interval is very narrow.
Negative factors
- Silver grade is below the project's prior average but above the weak threshold for silver (30 g/t).
Evidence · table
“175.0”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-594Klaza · leadGrade: 0.92Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-594
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.92
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 36.17 m
- To
- 36.67 m
- Intercept Depth
- 36.17 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-594:36.17-36.67
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Lead grade is well below the project's prior average and falls below the weak tier for lead, and the interval is very narrow.
Negative factors
- Lead grade is well below the project's prior average but falls below the weak tier for lead (1%).
Evidence · table
“0.92”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-594Klaza · zincGrade: 0.69Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- KL-22-594
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.69
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 36.17 m
- To
- 36.67 m
- Intercept Depth
- 36.17 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-594:36.17-36.67
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Zinc grade is well below the project's prior average and falls below the weak tier for zinc, and the interval is very narrow.
Negative factors
- Zinc grade is well below the project's prior average and falls below the weak tier for zinc (2%).
Evidence · table
“0.69”
Context: 0.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-594Klaza · goldGrade: 5.9Grade Unit: g/tIntercept: 0.36 mView all detailsHide details
Identity
- Hole ID
- KL-22-594
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.9
- Grade Unit
- g/t
- Intercept
- 0.36 m
- From
- 152.12 m
- To
- 152.48 m
- Intercept Depth
- 152.12 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-594:152.12-152.48
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 10.97
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Exceptional gold and AuEq grades, but the interval is very narrow.
Positive factors
- Gold grade is exceptional (5.9 g/t Au) for an open pit scenario.
- AuEq grade is exceptional (10.97 g/t AuEq).
Evidence · table
“5.90”
Context: 0.36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
KL-22-594Klaza · silverGrade: 257Grade Unit: g/tIntercept: 0.36 mView all detailsHide details
Identity
- Hole ID
- KL-22-594
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 257
- Grade Unit
- g/t
- Intercept
- 0.36 m
- From
- 152.12 m
- To
- 152.48 m
- Intercept Depth
- 152.12 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- KL-22-594:152.12-152.48
- Mining Method
- mixed
Location
- Location
- Central Klaza Zone
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Metal Eq. Grade
- 10.97
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Silver grade is strong, but below the project's prior average, and the interval is very narrow.
Positive factors
- Silver grade is strong (257 g/t Ag).
Negative factors
- Silver grade is below the project's prior average.
Evidence · table
“257.0”
Context: 0.36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
andKlaza · goldGrade: 2.9Grade Unit: g/tIntercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.9
- Grade Unit
- g/t
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Sample Type
- drill
- Group ID
- and:78.02-78.58
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.9 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.9 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.90”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 184Grade Unit: g/tIntercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 184
- Grade Unit
- g/t
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Sample Type
- drill
- Group ID
- and:78.02-78.58
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 184 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 103.0 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“184.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.49Grade Unit: %Intercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Sample Type
- drill
- Group ID
- and:78.02-78.58
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.49 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.49 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.49”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.45Grade Unit: %Intercept: 0.56 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 0.56 m
- From
- 78.02 m
- To
- 78.58 m
- Intercept Depth
- 78.02 m
Classification
- Sample Type
- drill
- Group ID
- and:78.02-78.58
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.45 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.45 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.45”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 0.27Grade Unit: g/tIntercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Sample Type
- drill
- Group ID
- and:92.9-94.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.27 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 318Grade Unit: g/tIntercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 318
- Grade Unit
- g/t
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Sample Type
- drill
- Group ID
- and:92.9-94.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 318 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 426.1 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 318 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“318.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.36Grade Unit: %Intercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Sample Type
- drill
- Group ID
- and:92.9-94.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.36 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.36 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.36”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.42Grade Unit: %Intercept: 1.34 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 1.34 m
- From
- 92.9 m
- To
- 94.24 m
- Intercept Depth
- 92.9 m
Classification
- Sample Type
- drill
- Group ID
- and:92.9-94.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.42 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.14Grade Unit: g/tIntercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.14
- Grade Unit
- g/t
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Sample Type
- drill
- Group ID
- and:100.79-101.62
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.14 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.14 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.14”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 33.8Grade Unit: g/tIntercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 33.8
- Grade Unit
- g/t
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Sample Type
- drill
- Group ID
- and:100.79-101.62
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 33.8 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 28.1 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“33.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.27Grade Unit: %Intercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Sample Type
- drill
- Group ID
- and:100.79-101.62
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.27 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.12Grade Unit: %Intercept: 0.83 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 0.83 m
- From
- 100.79 m
- To
- 101.62 m
- Intercept Depth
- 100.79 m
Classification
- Sample Type
- drill
- Group ID
- and:100.79-101.62
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.12 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 4.9Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.9
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Sample Type
- drill
- Group ID
- and:148.79-149.59
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.9 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.9 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.9 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.90”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 102Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 102
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Sample Type
- drill
- Group ID
- and:148.79-149.59
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 102 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 81.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“102.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.34Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Sample Type
- drill
- Group ID
- and:148.79-149.59
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.34 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.97Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.97
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 148.79 m
- To
- 149.59 m
- Intercept Depth
- 148.79 m
Classification
- Sample Type
- drill
- Group ID
- and:148.79-149.59
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.97 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.97 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.97”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.02Grade Unit: g/tIntercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.02
- Grade Unit
- g/t
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Sample Type
- drill
- Group ID
- and:132.45-133.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.02 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.0 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.02 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 3.3Grade Unit: g/tIntercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.3
- Grade Unit
- g/t
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Sample Type
- drill
- Group ID
- and:132.45-133.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.3 g/t·m is below.
Negative factors
- 3.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.3”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.02Grade Unit: %Intercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Sample Type
- drill
- Group ID
- and:132.45-133.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.05Grade Unit: %Intercept: 1.01 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.01 m
- From
- 132.45 m
- To
- 133.46 m
- Intercept Depth
- 132.45 m
Classification
- Sample Type
- drill
- Group ID
- and:132.45-133.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 4.06Grade Unit: g/tIntercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.06
- Grade Unit
- g/t
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Sample Type
- drill
- Group ID
- and:19-20.07
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.06 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.3 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.06 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.06”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 234Grade Unit: g/tIntercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 234
- Grade Unit
- g/t
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Sample Type
- drill
- Group ID
- and:19-20.07
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 234 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 250.4 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 234 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“234.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.54Grade Unit: %Intercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Sample Type
- drill
- Group ID
- and:19-20.07
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.54 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 3.18Grade Unit: %Intercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.18
- Grade Unit
- %
- Intercept
- 1.07 m
- From
- 19 m
- To
- 20.07 m
- Intercept Depth
- 19 m
Classification
- Sample Type
- drill
- Group ID
- and:19-20.07
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.18 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 3.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.18”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.88Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.88
- Grade Unit
- g/t
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Sample Type
- drill
- Group ID
- and:37.49-37.94
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.88 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.8 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.88”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 330Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 330
- Grade Unit
- g/t
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Sample Type
- drill
- Group ID
- and:37.49-37.94
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 330 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 148.5 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 330 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“330.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 1.75Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.75
- Grade Unit
- %
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Sample Type
- drill
- Group ID
- and:37.49-37.94
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.75 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 0.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.75”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.61Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.61
- Grade Unit
- %
- Intercept
- 0.45 m
- From
- 37.49 m
- To
- 37.94 m
- Intercept Depth
- 37.49 m
Classification
- Sample Type
- drill
- Group ID
- and:37.49-37.94
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.61 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 1.61 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.61”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 0.27Grade Unit: g/tIntercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Sample Type
- drill
- Group ID
- and:57.11-58.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.27 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 176.2Grade Unit: g/tIntercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 176.2
- Grade Unit
- g/t
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Sample Type
- drill
- Group ID
- and:57.11-58.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 176.2 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 289.0 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“176.2”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.55Grade Unit: %Intercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Sample Type
- drill
- Group ID
- and:57.11-58.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.55 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.83Grade Unit: %Intercept: 1.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.83
- Grade Unit
- %
- Intercept
- 1.64 m
- From
- 57.11 m
- To
- 58.75 m
- Intercept Depth
- 57.11 m
Classification
- Sample Type
- drill
- Group ID
- and:57.11-58.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.83 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.83 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.83”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 3.26Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.26
- Grade Unit
- g/t
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Sample Type
- drill
- Group ID
- and:119.83-120.69
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.26 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 3.26 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 53.3Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 53.3
- Grade Unit
- g/t
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Sample Type
- drill
- Group ID
- and:119.83-120.69
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 53.3 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 45.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“53.3”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.76Grade Unit: %Intercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Sample Type
- drill
- Group ID
- and:119.83-120.69
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.76 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.76 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.76”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.91Grade Unit: %Intercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.91
- Grade Unit
- %
- Intercept
- 0.86 m
- From
- 119.83 m
- To
- 120.69 m
- Intercept Depth
- 119.83 m
Classification
- Sample Type
- drill
- Group ID
- and:119.83-120.69
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.91 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.91 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.91”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 5.94Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.94
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Sample Type
- drill
- Group ID
- and:129-129.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.94 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.8 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.94 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.94”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 753Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 753
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Sample Type
- drill
- Group ID
- and:129-129.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 753 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 225.9 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 753 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“753.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 16.75Grade Unit: %Intercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 16.75
- Grade Unit
- %
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Sample Type
- drill
- Group ID
- and:129-129.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 16.75 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 5.0 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 16.75 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“16.75”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.43Grade Unit: %Intercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.43
- Grade Unit
- %
- Intercept
- 0.3 m
- From
- 129 m
- To
- 129.3 m
- Intercept Depth
- 129 m
Classification
- Sample Type
- drill
- Group ID
- and:129-129.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.43 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 1.43 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.43”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 5.01Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.01
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Sample Type
- drill
- Group ID
- and:176.45-177
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.01 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.8 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.01 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.01”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 190Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 190
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Sample Type
- drill
- Group ID
- and:176.45-177
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 190 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 104.5 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“190.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.59Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.59
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Sample Type
- drill
- Group ID
- and:176.45-177
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.59 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.59 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.59”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.28Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 176.45 m
- To
- 177 m
- Intercept Depth
- 176.45 m
Classification
- Sample Type
- drill
- Group ID
- and:176.45-177
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.28 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 1.28 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.28”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.56Grade Unit: g/tIntercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.56
- Grade Unit
- g/t
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Sample Type
- drill
- Group ID
- and:192.92-194.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.56 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.0 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.56”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 251Grade Unit: g/tIntercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 251
- Grade Unit
- g/t
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Sample Type
- drill
- Group ID
- and:192.92-194.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 251 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 316.3 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 251 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“251.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 2.8Grade Unit: %Intercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.8
- Grade Unit
- %
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Sample Type
- drill
- Group ID
- and:192.92-194.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.8 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 3.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.80”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.53Grade Unit: %Intercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.53
- Grade Unit
- %
- Intercept
- 1.26 m
- From
- 192.92 m
- To
- 194.18 m
- Intercept Depth
- 192.92 m
Classification
- Sample Type
- drill
- Group ID
- and:192.92-194.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.53 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 1.53 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.53”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 6.6Grade Unit: g/tIntercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.6
- Grade Unit
- g/t
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Sample Type
- drill
- Group ID
- and:170.78-171.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.6 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.0 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.6 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.60”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 439Grade Unit: g/tIntercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 439
- Grade Unit
- g/t
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Sample Type
- drill
- Group ID
- and:170.78-171.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 439 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 201.9 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 439 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“439.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 2.57Grade Unit: %Intercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.57
- Grade Unit
- %
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Sample Type
- drill
- Group ID
- and:170.78-171.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.57 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.57”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 4.79Grade Unit: %Intercept: 0.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.79
- Grade Unit
- %
- Intercept
- 0.46 m
- From
- 170.78 m
- To
- 171.24 m
- Intercept Depth
- 170.78 m
Classification
- Sample Type
- drill
- Group ID
- and:170.78-171.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.79 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 2.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.79”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.5Grade Unit: g/tIntercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Sample Type
- drill
- Group ID
- and:185.33-186.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.5 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 26.8Grade Unit: g/tIntercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 26.8
- Grade Unit
- g/t
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Sample Type
- drill
- Group ID
- and:185.33-186.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 26.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 28.4 g/t·m is below.
Negative factors
- 26.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“26.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.26Grade Unit: %Intercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Sample Type
- drill
- Group ID
- and:185.33-186.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.26 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.54Grade Unit: %Intercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 1.06 m
- From
- 185.33 m
- To
- 186.39 m
- Intercept Depth
- 185.33 m
Classification
- Sample Type
- drill
- Group ID
- and:185.33-186.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.54 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.71Grade Unit: g/tIntercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.71
- Grade Unit
- g/t
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Sample Type
- drill
- Group ID
- and:247.47-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.71 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 10.7 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 2.71 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.71”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 214.2Grade Unit: g/tIntercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 214.2
- Grade Unit
- g/t
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Sample Type
- drill
- Group ID
- and:247.47-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 214.2 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 841.8 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 214.2 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“214.2”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 1.21Grade Unit: %Intercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.21
- Grade Unit
- %
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Sample Type
- drill
- Group ID
- and:247.47-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.21 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 4.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.21”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.87Grade Unit: %Intercept: 3.93 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 3.93 m
- From
- 247.47 m
- To
- 251.4 m
- Intercept Depth
- 247.47 m
Classification
- Sample Type
- drill
- Group ID
- and:247.47-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.87 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.4 %·m is below.
Negative factors
- 0.87 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.87”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 4.27Grade Unit: g/tIntercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.27
- Grade Unit
- g/t
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Sample Type
- drill
- Group ID
- incl.:249.09-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.27 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 9.9 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.27 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.27”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 351.6Grade Unit: g/tIntercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 351.6
- Grade Unit
- g/t
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Sample Type
- drill
- Group ID
- incl.:249.09-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 351.6 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 812.2 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 351.6 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“351.6”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 1.91Grade Unit: %Intercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.91
- Grade Unit
- %
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Sample Type
- drill
- Group ID
- incl.:249.09-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.91 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 4.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.91”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 1.34Grade Unit: %Intercept: 2.31 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 2.31 m
- From
- 249.09 m
- To
- 251.4 m
- Intercept Depth
- 249.09 m
Classification
- Sample Type
- drill
- Group ID
- incl.:249.09-251.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.1 %·m is below.
Negative factors
- 1.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 9.35Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 9.35
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Sample Type
- drill
- Group ID
- and:102.35-102.85
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 9.35 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.7 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 9.35 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.35”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 118Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 118
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Sample Type
- drill
- Group ID
- and:102.35-102.85
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 118 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 59.0 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“118.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 1.22Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.22
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Sample Type
- drill
- Group ID
- and:102.35-102.85
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.22 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 0.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.22”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 2.93Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.93
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 102.35 m
- To
- 102.85 m
- Intercept Depth
- 102.35 m
Classification
- Sample Type
- drill
- Group ID
- and:102.35-102.85
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.93 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.93”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 11.8Grade Unit: g/tIntercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 11.8
- Grade Unit
- g/t
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Sample Type
- drill
- Group ID
- and:110.48-111.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 11.8 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 9.1 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 11.8 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.80”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 106Grade Unit: g/tIntercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 106
- Grade Unit
- g/t
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Sample Type
- drill
- Group ID
- and:110.48-111.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 106 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 81.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“106.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.44Grade Unit: %Intercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Sample Type
- drill
- Group ID
- and:110.48-111.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.44 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.44 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.44”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.02Grade Unit: %Intercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.02
- Grade Unit
- %
- Intercept
- 0.77 m
- From
- 110.48 m
- To
- 111.25 m
- Intercept Depth
- 110.48 m
Classification
- Sample Type
- drill
- Group ID
- and:110.48-111.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 1.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.03Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Sample Type
- drill
- Group ID
- and:172.61-173.49
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.03 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 5.3Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.3
- Grade Unit
- g/t
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Sample Type
- drill
- Group ID
- and:172.61-173.49
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.7 g/t·m is below.
Negative factors
- 5.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.3”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.07Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Sample Type
- drill
- Group ID
- and:172.61-173.49
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.19Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 0.88 m
- From
- 172.61 m
- To
- 173.49 m
- Intercept Depth
- 172.61 m
Classification
- Sample Type
- drill
- Group ID
- and:172.61-173.49
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 5.9Grade Unit: g/tIntercept: 0.36 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.9
- Grade Unit
- g/t
- Intercept
- 0.36 m
- From
- 152.12 m
- To
- 152.48 m
- Intercept Depth
- 152.12 m
Classification
- Sample Type
- drill
- Group ID
- and:152.12-152.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.9 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.1 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.9 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.90”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 257Grade Unit: g/tIntercept: 0.36 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 257
- Grade Unit
- g/t
- Intercept
- 0.36 m
- From
- 152.12 m
- To
- 152.48 m
- Intercept Depth
- 152.12 m
Classification
- Sample Type
- drill
- Group ID
- and:152.12-152.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 257 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 92.5 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 257 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“257.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 4.03Grade Unit: %Intercept: 0.36 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.03
- Grade Unit
- %
- Intercept
- 0.36 m
- From
- 152.12 m
- To
- 152.48 m
- Intercept Depth
- 152.12 m
Classification
- Sample Type
- drill
- Group ID
- and:152.12-152.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.03 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 1.5 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 6.22Grade Unit: %Intercept: 0.36 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.22
- Grade Unit
- %
- Intercept
- 0.36 m
- From
- 152.12 m
- To
- 152.48 m
- Intercept Depth
- 152.12 m
Classification
- Sample Type
- drill
- Group ID
- and:152.12-152.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.22 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 2.2 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.22”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.77Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.77
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 177.07 m
- To
- 177.57 m
- Intercept Depth
- 177.07 m
Classification
- Sample Type
- drill
- Group ID
- and:177.07-177.57
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.77 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.77”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 93.9Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 93.9
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 177.07 m
- To
- 177.57 m
- Intercept Depth
- 177.07 m
Classification
- Sample Type
- drill
- Group ID
- and:177.07-177.57
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 93.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 47.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“93.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.53Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 177.07 m
- To
- 177.57 m
- Intercept Depth
- 177.07 m
Classification
- Sample Type
- drill
- Group ID
- and:177.07-177.57
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.53 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.79Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.79
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 177.07 m
- To
- 177.57 m
- Intercept Depth
- 177.07 m
Classification
- Sample Type
- drill
- Group ID
- and:177.07-177.57
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.79 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.79 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.79”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 25.9Grade Unit: g/tIntercept: 0.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 25.9
- Grade Unit
- g/t
- Intercept
- 0.64 m
- From
- 249.76 m
- To
- 250.4 m
- Intercept Depth
- 249.76 m
Classification
- Sample Type
- drill
- Group ID
- and:249.76-250.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 25.9 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 16.6 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 25.9 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“25.90”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 258Grade Unit: g/tIntercept: 0.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 258
- Grade Unit
- g/t
- Intercept
- 0.64 m
- From
- 249.76 m
- To
- 250.4 m
- Intercept Depth
- 249.76 m
Classification
- Sample Type
- drill
- Group ID
- and:249.76-250.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 258 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 165.1 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 258 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“258.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 2.89Grade Unit: %Intercept: 0.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.89
- Grade Unit
- %
- Intercept
- 0.64 m
- From
- 249.76 m
- To
- 250.4 m
- Intercept Depth
- 249.76 m
Classification
- Sample Type
- drill
- Group ID
- and:249.76-250.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.89 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.89”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 5.39Grade Unit: %Intercept: 0.64 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.39
- Grade Unit
- %
- Intercept
- 0.64 m
- From
- 249.76 m
- To
- 250.4 m
- Intercept Depth
- 249.76 m
Classification
- Sample Type
- drill
- Group ID
- and:249.76-250.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.39 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 3.4 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.39”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-595Klaza · goldGrade: 0.24Grade Unit: g/tIntercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- KL-22-595
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 0.39 m
- From
- 263.63 m
- To
- 264.02 m
- Intercept Depth
- 263.63 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-595:263.63-264.02
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.24 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: KL-22-595
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-595Klaza · silverGrade: 150Grade Unit: g/tIntercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- KL-22-595
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 150
- Grade Unit
- g/t
- Intercept
- 0.39 m
- From
- 263.63 m
- To
- 264.02 m
- Intercept Depth
- 263.63 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-595:263.63-264.02
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 150 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 58.5 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“150.0”
Context: KL-22-595
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-595Klaza · leadGrade: 2.26Grade Unit: %Intercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- KL-22-595
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.26
- Grade Unit
- %
- Intercept
- 0.39 m
- From
- 263.63 m
- To
- 264.02 m
- Intercept Depth
- 263.63 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-595:263.63-264.02
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.26 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 0.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.26”
Context: KL-22-595
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-595Klaza · zincGrade: 0.23Grade Unit: %Intercept: 0.39 mView all detailsHide details
Identity
- Hole ID
- KL-22-595
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 0.39 m
- From
- 263.63 m
- To
- 264.02 m
- Intercept Depth
- 263.63 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-595:263.63-264.02
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.23 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: KL-22-595
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.27Grade Unit: g/tIntercept: 0.72 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.27
- Grade Unit
- g/t
- Intercept
- 0.72 m
- From
- 282.74 m
- To
- 283.46 m
- Intercept Depth
- 282.74 m
Classification
- Sample Type
- drill
- Group ID
- and:282.74-283.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.27 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.27 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.27”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 42.7Grade Unit: g/tIntercept: 0.72 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 42.7
- Grade Unit
- g/t
- Intercept
- 0.72 m
- From
- 282.74 m
- To
- 283.46 m
- Intercept Depth
- 282.74 m
Classification
- Sample Type
- drill
- Group ID
- and:282.74-283.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 42.7 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 30.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“42.7”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.67Grade Unit: %Intercept: 0.72 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.67
- Grade Unit
- %
- Intercept
- 0.72 m
- From
- 282.74 m
- To
- 283.46 m
- Intercept Depth
- 282.74 m
Classification
- Sample Type
- drill
- Group ID
- and:282.74-283.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.67 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.67 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.67”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.38Grade Unit: %Intercept: 0.72 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 0.72 m
- From
- 282.74 m
- To
- 283.46 m
- Intercept Depth
- 282.74 m
Classification
- Sample Type
- drill
- Group ID
- and:282.74-283.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.38 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 0.92Grade Unit: g/tIntercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.92
- Grade Unit
- g/t
- Intercept
- 1.06 m
- From
- 324.61 m
- To
- 325.67 m
- Intercept Depth
- 324.61 m
Classification
- Sample Type
- drill
- Group ID
- and:324.61-325.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.92 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.92”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 78.1Grade Unit: g/tIntercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 78.1
- Grade Unit
- g/t
- Intercept
- 1.06 m
- From
- 324.61 m
- To
- 325.67 m
- Intercept Depth
- 324.61 m
Classification
- Sample Type
- drill
- Group ID
- and:324.61-325.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 78.1 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 82.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“78.1”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 1.26Grade Unit: %Intercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.26
- Grade Unit
- %
- Intercept
- 1.06 m
- From
- 324.61 m
- To
- 325.67 m
- Intercept Depth
- 324.61 m
Classification
- Sample Type
- drill
- Group ID
- and:324.61-325.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.26 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.53Grade Unit: %Intercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 1.06 m
- From
- 324.61 m
- To
- 325.67 m
- Intercept Depth
- 324.61 m
Classification
- Sample Type
- drill
- Group ID
- and:324.61-325.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.53 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.53 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.53”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.99Grade Unit: g/tIntercept: 0.59 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 0.59 m
- From
- 345.14 m
- To
- 345.73 m
- Intercept Depth
- 345.14 m
Classification
- Sample Type
- drill
- Group ID
- and:345.14-345.73
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.99 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.2 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.99”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 29.1Grade Unit: g/tIntercept: 0.59 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 29.1
- Grade Unit
- g/t
- Intercept
- 0.59 m
- From
- 345.14 m
- To
- 345.73 m
- Intercept Depth
- 345.14 m
Classification
- Sample Type
- drill
- Group ID
- and:345.14-345.73
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 29.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 17.2 g/t·m is below.
Negative factors
- 29.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“29.1”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.34Grade Unit: %Intercept: 0.59 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 0.59 m
- From
- 345.14 m
- To
- 345.73 m
- Intercept Depth
- 345.14 m
Classification
- Sample Type
- drill
- Group ID
- and:345.14-345.73
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.34 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.34 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.34”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.55Grade Unit: %Intercept: 0.59 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.59 m
- From
- 345.14 m
- To
- 345.73 m
- Intercept Depth
- 345.14 m
Classification
- Sample Type
- drill
- Group ID
- and:345.14-345.73
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.55 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-596Klaza · goldGrade: 3.08Grade Unit: g/tIntercept: 0.76 mView all detailsHide details
Identity
- Hole ID
- KL-22-596
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.08
- Grade Unit
- g/t
- Intercept
- 0.76 m
- From
- 18.71 m
- To
- 19.47 m
- Intercept Depth
- 18.71 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-596:18.71-19.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.08 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.3 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 3.08 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.08”
Context: KL-22-596
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-596Klaza · silverGrade: 1.7Grade Unit: g/tIntercept: 0.76 mView all detailsHide details
Identity
- Hole ID
- KL-22-596
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 0.76 m
- From
- 18.71 m
- To
- 19.47 m
- Intercept Depth
- 18.71 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-596:18.71-19.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.3 g/t·m is below.
Negative factors
- 1.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.7”
Context: KL-22-596
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-596Klaza · leadGrade: 0.01Grade Unit: %Intercept: 0.76 mView all detailsHide details
Identity
- Hole ID
- KL-22-596
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.76 m
- From
- 18.71 m
- To
- 19.47 m
- Intercept Depth
- 18.71 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-596:18.71-19.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: KL-22-596
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-596Klaza · zincGrade: 0.02Grade Unit: %Intercept: 0.76 mView all detailsHide details
Identity
- Hole ID
- KL-22-596
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 0.76 m
- From
- 18.71 m
- To
- 19.47 m
- Intercept Depth
- 18.71 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-596:18.71-19.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: KL-22-596
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.4Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.4
- Grade Unit
- g/t
- Intercept
- 0.66 m
- From
- 35.75 m
- To
- 36.41 m
- Intercept Depth
- 35.75 m
Classification
- Sample Type
- drill
- Group ID
- and:35.75-36.41
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.4 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.40”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 520Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 520
- Grade Unit
- g/t
- Intercept
- 0.66 m
- From
- 35.75 m
- To
- 36.41 m
- Intercept Depth
- 35.75 m
Classification
- Sample Type
- drill
- Group ID
- and:35.75-36.41
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 520 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 343.2 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 520 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“520.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.42Grade Unit: %Intercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 0.66 m
- From
- 35.75 m
- To
- 36.41 m
- Intercept Depth
- 35.75 m
Classification
- Sample Type
- drill
- Group ID
- and:35.75-36.41
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.42 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.8Grade Unit: %Intercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 0.66 m
- From
- 35.75 m
- To
- 36.41 m
- Intercept Depth
- 35.75 m
Classification
- Sample Type
- drill
- Group ID
- and:35.75-36.41
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.8 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.80”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 3.02Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.02
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 200.9 m
- To
- 201.4 m
- Intercept Depth
- 200.9 m
Classification
- Sample Type
- drill
- Group ID
- and:200.9-201.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.02 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.5 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 3.02 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 385Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 385
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 200.9 m
- To
- 201.4 m
- Intercept Depth
- 200.9 m
Classification
- Sample Type
- drill
- Group ID
- and:200.9-201.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 385 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 192.5 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 385 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“385.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 10.1Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 10.1
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 200.9 m
- To
- 201.4 m
- Intercept Depth
- 200.9 m
Classification
- Sample Type
- drill
- Group ID
- and:200.9-201.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 10.1 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 5.0 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 10.1 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.49Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.49
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 200.9 m
- To
- 201.4 m
- Intercept Depth
- 200.9 m
Classification
- Sample Type
- drill
- Group ID
- and:200.9-201.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.49 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.49 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.49”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.86Grade Unit: g/tIntercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.86
- Grade Unit
- g/t
- Intercept
- 1.26 m
- From
- 226.24 m
- To
- 227.5 m
- Intercept Depth
- 226.24 m
Classification
- Sample Type
- drill
- Group ID
- and:226.24-227.5
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.86 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.3 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.86”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 15.8Grade Unit: g/tIntercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 15.8
- Grade Unit
- g/t
- Intercept
- 1.26 m
- From
- 226.24 m
- To
- 227.5 m
- Intercept Depth
- 226.24 m
Classification
- Sample Type
- drill
- Group ID
- and:226.24-227.5
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 15.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 19.9 g/t·m is below.
Negative factors
- 15.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.1Grade Unit: %Intercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1.26 m
- From
- 226.24 m
- To
- 227.5 m
- Intercept Depth
- 226.24 m
Classification
- Sample Type
- drill
- Group ID
- and:226.24-227.5
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.1 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.63Grade Unit: %Intercept: 1.26 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.63
- Grade Unit
- %
- Intercept
- 1.26 m
- From
- 226.24 m
- To
- 227.5 m
- Intercept Depth
- 226.24 m
Classification
- Sample Type
- drill
- Group ID
- and:226.24-227.5
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.63 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.63 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.63”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 5.6Grade Unit: g/tIntercept: 3.38 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.6
- Grade Unit
- g/t
- Intercept
- 3.38 m
- From
- 292.1 m
- To
- 295.48 m
- Intercept Depth
- 292.1 m
Classification
- Sample Type
- drill
- Group ID
- and:292.1-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.6 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 18.9 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.6 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.60”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 173.6Grade Unit: g/tIntercept: 3.38 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 173.6
- Grade Unit
- g/t
- Intercept
- 3.38 m
- From
- 292.1 m
- To
- 295.48 m
- Intercept Depth
- 292.1 m
Classification
- Sample Type
- drill
- Group ID
- and:292.1-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 173.6 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 586.8 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“173.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 2.02Grade Unit: %Intercept: 3.38 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.02
- Grade Unit
- %
- Intercept
- 3.38 m
- From
- 292.1 m
- To
- 295.48 m
- Intercept Depth
- 292.1 m
Classification
- Sample Type
- drill
- Group ID
- and:292.1-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.02 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 6.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 2.09Grade Unit: %Intercept: 3.38 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.09
- Grade Unit
- %
- Intercept
- 3.38 m
- From
- 292.1 m
- To
- 295.48 m
- Intercept Depth
- 292.1 m
Classification
- Sample Type
- drill
- Group ID
- and:292.1-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.09 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 7.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 12.36Grade Unit: g/tIntercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 12.36
- Grade Unit
- g/t
- Intercept
- 1.35 m
- From
- 294.13 m
- To
- 295.48 m
- Intercept Depth
- 294.13 m
Classification
- Sample Type
- drill
- Group ID
- incl.:294.13-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 12.36 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 16.7 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 12.36 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.36”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 370Grade Unit: g/tIntercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 370
- Grade Unit
- g/t
- Intercept
- 1.35 m
- From
- 294.13 m
- To
- 295.48 m
- Intercept Depth
- 294.13 m
Classification
- Sample Type
- drill
- Group ID
- incl.:294.13-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 370 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 499.5 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 370 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“370.0”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 4.47Grade Unit: %Intercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.47
- Grade Unit
- %
- Intercept
- 1.35 m
- From
- 294.13 m
- To
- 295.48 m
- Intercept Depth
- 294.13 m
Classification
- Sample Type
- drill
- Group ID
- incl.:294.13-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.47 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 6.0 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.47”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 4.19Grade Unit: %Intercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.19
- Grade Unit
- %
- Intercept
- 1.35 m
- From
- 294.13 m
- To
- 295.48 m
- Intercept Depth
- 294.13 m
Classification
- Sample Type
- drill
- Group ID
- incl.:294.13-295.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.19 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 5.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.19”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-597Klaza · goldGrade: 6.93Grade Unit: g/tIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- KL-22-597
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.93
- Grade Unit
- g/t
- Intercept
- 0.42 m
- From
- 38.98 m
- To
- 39.4 m
- Intercept Depth
- 38.98 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-597:38.98-39.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.93 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.9 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.93 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.93”
Context: KL-22-597
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-597Klaza · silverGrade: 328Grade Unit: g/tIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- KL-22-597
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 328
- Grade Unit
- g/t
- Intercept
- 0.42 m
- From
- 38.98 m
- To
- 39.4 m
- Intercept Depth
- 38.98 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-597:38.98-39.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 328 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 137.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 328 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“328.0”
Context: KL-22-597
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-597Klaza · leadGrade: 10.7Grade Unit: %Intercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- KL-22-597
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 10.7
- Grade Unit
- %
- Intercept
- 0.42 m
- From
- 38.98 m
- To
- 39.4 m
- Intercept Depth
- 38.98 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-597:38.98-39.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 10.7 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 4.5 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 10.7 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.70”
Context: KL-22-597
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-597Klaza · zincGrade: 13.5Grade Unit: %Intercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- KL-22-597
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 13.5
- Grade Unit
- %
- Intercept
- 0.42 m
- From
- 38.98 m
- To
- 39.4 m
- Intercept Depth
- 38.98 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-597:38.98-39.4
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 13.5 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 5.7 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 13.5 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.50”
Context: KL-22-597
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 3.75Grade Unit: g/tIntercept: 0.32 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.75
- Grade Unit
- g/t
- Intercept
- 0.32 m
- From
- 260.98 m
- To
- 261.3 m
- Intercept Depth
- 260.98 m
Classification
- Sample Type
- drill
- Group ID
- and:260.98-261.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.75 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.2 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 3.75 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.75”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 9.1Grade Unit: g/tIntercept: 0.32 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 9.1
- Grade Unit
- g/t
- Intercept
- 0.32 m
- From
- 260.98 m
- To
- 261.3 m
- Intercept Depth
- 260.98 m
Classification
- Sample Type
- drill
- Group ID
- and:260.98-261.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 9.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 2.9 g/t·m is below.
Negative factors
- 9.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.1”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.03Grade Unit: %Intercept: 0.32 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.32 m
- From
- 260.98 m
- To
- 261.3 m
- Intercept Depth
- 260.98 m
Classification
- Sample Type
- drill
- Group ID
- and:260.98-261.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.36Grade Unit: %Intercept: 0.32 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 0.32 m
- From
- 260.98 m
- To
- 261.3 m
- Intercept Depth
- 260.98 m
Classification
- Sample Type
- drill
- Group ID
- and:260.98-261.3
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.36 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.36 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.36”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.95Grade Unit: g/tIntercept: 1.76 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.95
- Grade Unit
- g/t
- Intercept
- 1.76 m
- From
- 264.44 m
- To
- 266.2 m
- Intercept Depth
- 264.44 m
Classification
- Sample Type
- drill
- Group ID
- and:264.44-266.2
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.95 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.4 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.95”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 16.5Grade Unit: g/tIntercept: 1.76 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 16.5
- Grade Unit
- g/t
- Intercept
- 1.76 m
- From
- 264.44 m
- To
- 266.2 m
- Intercept Depth
- 264.44 m
Classification
- Sample Type
- drill
- Group ID
- and:264.44-266.2
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 16.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 29.0 g/t·m is below.
Negative factors
- 16.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“16.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.05Grade Unit: %Intercept: 1.76 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.76 m
- From
- 264.44 m
- To
- 266.2 m
- Intercept Depth
- 264.44 m
Classification
- Sample Type
- drill
- Group ID
- and:264.44-266.2
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.38Grade Unit: %Intercept: 1.76 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 1.76 m
- From
- 264.44 m
- To
- 266.2 m
- Intercept Depth
- 264.44 m
Classification
- Sample Type
- drill
- Group ID
- and:264.44-266.2
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.38 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 15.05Grade Unit: g/tIntercept: 0.33 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 15.05
- Grade Unit
- g/t
- Intercept
- 0.33 m
- From
- 287.09 m
- To
- 287.42 m
- Intercept Depth
- 287.09 m
Classification
- Sample Type
- drill
- Group ID
- and:287.09-287.42
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 15.05 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 5.0 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 15.05 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.05”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 168Grade Unit: g/tIntercept: 0.33 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 168
- Grade Unit
- g/t
- Intercept
- 0.33 m
- From
- 287.09 m
- To
- 287.42 m
- Intercept Depth
- 287.09 m
Classification
- Sample Type
- drill
- Group ID
- and:287.09-287.42
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 168 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 55.4 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“168.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.35Grade Unit: %Intercept: 0.33 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 0.33 m
- From
- 287.09 m
- To
- 287.42 m
- Intercept Depth
- 287.09 m
Classification
- Sample Type
- drill
- Group ID
- and:287.09-287.42
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.35 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 12.65Grade Unit: %Intercept: 0.33 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 12.65
- Grade Unit
- %
- Intercept
- 0.33 m
- From
- 287.09 m
- To
- 287.42 m
- Intercept Depth
- 287.09 m
Classification
- Sample Type
- drill
- Group ID
- and:287.09-287.42
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 12.65 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 4.2 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 12.65 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.65”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 3.4Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 294.2 m
- To
- 294.6 m
- Intercept Depth
- 294.2 m
Classification
- Sample Type
- drill
- Group ID
- and:294.2-294.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.4 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 3.4 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.40”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 9.5Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 9.5
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 294.2 m
- To
- 294.6 m
- Intercept Depth
- 294.2 m
Classification
- Sample Type
- drill
- Group ID
- and:294.2-294.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 9.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 3.8 g/t·m is below.
Negative factors
- 9.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.13Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 294.2 m
- To
- 294.6 m
- Intercept Depth
- 294.2 m
Classification
- Sample Type
- drill
- Group ID
- and:294.2-294.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.13 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.8Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 294.2 m
- To
- 294.6 m
- Intercept Depth
- 294.2 m
Classification
- Sample Type
- drill
- Group ID
- and:294.2-294.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.8 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.80”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 6.75Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.75
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 324.83 m
- To
- 325.23 m
- Intercept Depth
- 324.83 m
Classification
- Sample Type
- drill
- Group ID
- and:324.83-325.23
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.75 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.7 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.75 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.75”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 105Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 105
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 324.83 m
- To
- 325.23 m
- Intercept Depth
- 324.83 m
Classification
- Sample Type
- drill
- Group ID
- and:324.83-325.23
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 105 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 42.0 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“105.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.13Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 324.83 m
- To
- 325.23 m
- Intercept Depth
- 324.83 m
Classification
- Sample Type
- drill
- Group ID
- and:324.83-325.23
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.13 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.13 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.13”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 3.65Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.65
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 324.83 m
- To
- 325.23 m
- Intercept Depth
- 324.83 m
Classification
- Sample Type
- drill
- Group ID
- and:324.83-325.23
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.65 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.65”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.41Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.41
- Grade Unit
- g/t
- Intercept
- 0.45 m
- From
- 346.72 m
- To
- 347.17 m
- Intercept Depth
- 346.72 m
Classification
- Sample Type
- drill
- Group ID
- and:346.72-347.17
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.41 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.41”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 152Grade Unit: g/tIntercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 152
- Grade Unit
- g/t
- Intercept
- 0.45 m
- From
- 346.72 m
- To
- 347.17 m
- Intercept Depth
- 346.72 m
Classification
- Sample Type
- drill
- Group ID
- and:346.72-347.17
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 152 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 68.4 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“152.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.17Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 0.45 m
- From
- 346.72 m
- To
- 347.17 m
- Intercept Depth
- 346.72 m
Classification
- Sample Type
- drill
- Group ID
- and:346.72-347.17
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.17 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 2.51Grade Unit: %Intercept: 0.45 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.51
- Grade Unit
- %
- Intercept
- 0.45 m
- From
- 346.72 m
- To
- 347.17 m
- Intercept Depth
- 346.72 m
Classification
- Sample Type
- drill
- Group ID
- and:346.72-347.17
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.51 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.51”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-598Klaza · goldGrade: 6.66Grade Unit: g/tIntercept: 0.99 mView all detailsHide details
Identity
- Hole ID
- KL-22-598
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.66
- Grade Unit
- g/t
- Intercept
- 0.99 m
- From
- 98.07 m
- To
- 99.06 m
- Intercept Depth
- 98.07 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-598:98.07-99.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.66 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 6.6 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.66 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.66”
Context: KL-22-598
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-598Klaza · silverGrade: 56.3Grade Unit: g/tIntercept: 0.99 mView all detailsHide details
Identity
- Hole ID
- KL-22-598
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 56.3
- Grade Unit
- g/t
- Intercept
- 0.99 m
- From
- 98.07 m
- To
- 99.06 m
- Intercept Depth
- 98.07 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-598:98.07-99.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 56.3 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 55.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“56.3”
Context: KL-22-598
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-598Klaza · leadGrade: 0.09Grade Unit: %Intercept: 0.99 mView all detailsHide details
Identity
- Hole ID
- KL-22-598
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 0.99 m
- From
- 98.07 m
- To
- 99.06 m
- Intercept Depth
- 98.07 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-598:98.07-99.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: KL-22-598
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-598Klaza · zincGrade: 2.22Grade Unit: %Intercept: 0.99 mView all detailsHide details
Identity
- Hole ID
- KL-22-598
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.22
- Grade Unit
- %
- Intercept
- 0.99 m
- From
- 98.07 m
- To
- 99.06 m
- Intercept Depth
- 98.07 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-598:98.07-99.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.22 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 2.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.22”
Context: KL-22-598
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.44Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.44
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 110.79 m
- To
- 111.39 m
- Intercept Depth
- 110.79 m
Classification
- Sample Type
- drill
- Group ID
- and:110.79-111.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.44 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.9 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.44”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 93.9Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 93.9
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 110.79 m
- To
- 111.39 m
- Intercept Depth
- 110.79 m
Classification
- Sample Type
- drill
- Group ID
- and:110.79-111.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 93.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 56.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“93.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.58Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 110.79 m
- To
- 111.39 m
- Intercept Depth
- 110.79 m
Classification
- Sample Type
- drill
- Group ID
- and:110.79-111.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.58 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.58 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.58”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.44Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 110.79 m
- To
- 111.39 m
- Intercept Depth
- 110.79 m
Classification
- Sample Type
- drill
- Group ID
- and:110.79-111.39
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.44 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.44 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.44”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.71Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.71
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 172.69 m
- To
- 173.24 m
- Intercept Depth
- 172.69 m
Classification
- Sample Type
- drill
- Group ID
- and:172.69-173.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.71 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.5 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.71 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.71”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 212Grade Unit: g/tIntercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 212
- Grade Unit
- g/t
- Intercept
- 0.55 m
- From
- 172.69 m
- To
- 173.24 m
- Intercept Depth
- 172.69 m
Classification
- Sample Type
- drill
- Group ID
- and:172.69-173.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 212 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 116.6 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 212 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“212.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 1.72Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.72
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 172.69 m
- To
- 173.24 m
- Intercept Depth
- 172.69 m
Classification
- Sample Type
- drill
- Group ID
- and:172.69-173.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.72 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 0.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.72”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 2.89Grade Unit: %Intercept: 0.55 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.89
- Grade Unit
- %
- Intercept
- 0.55 m
- From
- 172.69 m
- To
- 173.24 m
- Intercept Depth
- 172.69 m
Classification
- Sample Type
- drill
- Group ID
- and:172.69-173.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.89 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.89”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.09Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.09
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 178.63 m
- To
- 179.83 m
- Intercept Depth
- 178.63 m
Classification
- Sample Type
- drill
- Group ID
- and:178.63-179.83
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.09 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.3 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 11.8Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 11.8
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 178.63 m
- To
- 179.83 m
- Intercept Depth
- 178.63 m
Classification
- Sample Type
- drill
- Group ID
- and:178.63-179.83
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 11.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 14.2 g/t·m is below.
Negative factors
- 11.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.8”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.22Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 178.63 m
- To
- 179.83 m
- Intercept Depth
- 178.63 m
Classification
- Sample Type
- drill
- Group ID
- and:178.63-179.83
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.22 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.22 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.22”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.12Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 178.63 m
- To
- 179.83 m
- Intercept Depth
- 178.63 m
Classification
- Sample Type
- drill
- Group ID
- and:178.63-179.83
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.12 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.71Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.71
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 230.35 m
- To
- 231.75 m
- Intercept Depth
- 230.35 m
Classification
- Sample Type
- drill
- Group ID
- and:230.35-231.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.71 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.71 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.71”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 59.9Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 59.9
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 230.35 m
- To
- 231.75 m
- Intercept Depth
- 230.35 m
Classification
- Sample Type
- drill
- Group ID
- and:230.35-231.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 59.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 83.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“59.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.57Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 230.35 m
- To
- 231.75 m
- Intercept Depth
- 230.35 m
Classification
- Sample Type
- drill
- Group ID
- and:230.35-231.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.57 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.57 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.57”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.12Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.12
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 230.35 m
- To
- 231.75 m
- Intercept Depth
- 230.35 m
Classification
- Sample Type
- drill
- Group ID
- and:230.35-231.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.12 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.6 %·m is below.
Negative factors
- 1.12 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.12”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-599Klaza · goldGrade: 3.02Grade Unit: g/tIntercept: 1.13 mView all detailsHide details
Identity
- Hole ID
- KL-22-599
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.02
- Grade Unit
- g/t
- Intercept
- 1.13 m
- From
- 67.54 m
- To
- 68.67 m
- Intercept Depth
- 67.54 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-599:67.54-68.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.02 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.4 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 3.02 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.02”
Context: KL-22-599
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-599Klaza · silverGrade: 77.2Grade Unit: g/tIntercept: 1.13 mView all detailsHide details
Identity
- Hole ID
- KL-22-599
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 77.2
- Grade Unit
- g/t
- Intercept
- 1.13 m
- From
- 67.54 m
- To
- 68.67 m
- Intercept Depth
- 67.54 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-599:67.54-68.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 77.2 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 87.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“77.2”
Context: KL-22-599
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-599Klaza · leadGrade: 0.24Grade Unit: %Intercept: 1.13 mView all detailsHide details
Identity
- Hole ID
- KL-22-599
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 1.13 m
- From
- 67.54 m
- To
- 68.67 m
- Intercept Depth
- 67.54 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-599:67.54-68.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.24 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: KL-22-599
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-599Klaza · zincGrade: 0.3Grade Unit: %Intercept: 1.13 mView all detailsHide details
Identity
- Hole ID
- KL-22-599
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1.13 m
- From
- 67.54 m
- To
- 68.67 m
- Intercept Depth
- 67.54 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-599:67.54-68.67
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.3 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: KL-22-599
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.93Grade Unit: g/tIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.93
- Grade Unit
- g/t
- Intercept
- 0.35 m
- From
- 158.93 m
- To
- 159.28 m
- Intercept Depth
- 158.93 m
Classification
- Sample Type
- drill
- Group ID
- and:158.93-159.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.93 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.7 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.93”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 271Grade Unit: g/tIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 271
- Grade Unit
- g/t
- Intercept
- 0.35 m
- From
- 158.93 m
- To
- 159.28 m
- Intercept Depth
- 158.93 m
Classification
- Sample Type
- drill
- Group ID
- and:158.93-159.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 271 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 94.8 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 271 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“271.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 3.69Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.69
- Grade Unit
- %
- Intercept
- 0.35 m
- From
- 158.93 m
- To
- 159.28 m
- Intercept Depth
- 158.93 m
Classification
- Sample Type
- drill
- Group ID
- and:158.93-159.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.69 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 1.3 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.69”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.55Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.35 m
- From
- 158.93 m
- To
- 159.28 m
- Intercept Depth
- 158.93 m
Classification
- Sample Type
- drill
- Group ID
- and:158.93-159.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.55 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.47Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.47
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 174.44 m
- To
- 174.84 m
- Intercept Depth
- 174.44 m
Classification
- Sample Type
- drill
- Group ID
- and:174.44-174.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.47 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.0 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.47 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.47”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 61.9Grade Unit: g/tIntercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 61.9
- Grade Unit
- g/t
- Intercept
- 0.4 m
- From
- 174.44 m
- To
- 174.84 m
- Intercept Depth
- 174.44 m
Classification
- Sample Type
- drill
- Group ID
- and:174.44-174.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 61.9 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 24.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“61.9”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.78Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.78
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 174.44 m
- To
- 174.84 m
- Intercept Depth
- 174.44 m
Classification
- Sample Type
- drill
- Group ID
- and:174.44-174.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.78 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.78 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.78”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.98Grade Unit: %Intercept: 0.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.98
- Grade Unit
- %
- Intercept
- 0.4 m
- From
- 174.44 m
- To
- 174.84 m
- Intercept Depth
- 174.44 m
Classification
- Sample Type
- drill
- Group ID
- and:174.44-174.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.98 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 1.98 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.98”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.64Grade Unit: g/tIntercept: 2.44 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.64
- Grade Unit
- g/t
- Intercept
- 2.44 m
- From
- 309.11 m
- To
- 311.55 m
- Intercept Depth
- 309.11 m
Classification
- Sample Type
- drill
- Group ID
- and:309.11-311.55
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.64 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 6.4 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.64 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.64”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 25.1Grade Unit: g/tIntercept: 2.44 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 25.1
- Grade Unit
- g/t
- Intercept
- 2.44 m
- From
- 309.11 m
- To
- 311.55 m
- Intercept Depth
- 309.11 m
Classification
- Sample Type
- drill
- Group ID
- and:309.11-311.55
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 25.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 61.2 g/t·m is below.
Negative factors
- 25.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“25.1”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.28Grade Unit: %Intercept: 2.44 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 2.44 m
- From
- 309.11 m
- To
- 311.55 m
- Intercept Depth
- 309.11 m
Classification
- Sample Type
- drill
- Group ID
- and:309.11-311.55
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.28 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.63Grade Unit: %Intercept: 2.44 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.63
- Grade Unit
- %
- Intercept
- 2.44 m
- From
- 309.11 m
- To
- 311.55 m
- Intercept Depth
- 309.11 m
Classification
- Sample Type
- drill
- Group ID
- and:309.11-311.55
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.63 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.5 %·m is below.
Negative factors
- 0.63 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.63”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-600Klaza · goldGrade: 5.97Grade Unit: g/tIntercept: 1.02 mView all detailsHide details
Identity
- Hole ID
- KL-22-600
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.97
- Grade Unit
- g/t
- Intercept
- 1.02 m
- From
- 47.04 m
- To
- 48.06 m
- Intercept Depth
- 47.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-600:47.04-48.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.97 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 6.1 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.97 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.97”
Context: KL-22-600
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-600Klaza · silverGrade: 21.5Grade Unit: g/tIntercept: 1.02 mView all detailsHide details
Identity
- Hole ID
- KL-22-600
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 21.5
- Grade Unit
- g/t
- Intercept
- 1.02 m
- From
- 47.04 m
- To
- 48.06 m
- Intercept Depth
- 47.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-600:47.04-48.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 21.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 21.9 g/t·m is below.
Negative factors
- 21.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“21.5”
Context: KL-22-600
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-600Klaza · leadGrade: 0.42Grade Unit: %Intercept: 1.02 mView all detailsHide details
Identity
- Hole ID
- KL-22-600
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.42
- Grade Unit
- %
- Intercept
- 1.02 m
- From
- 47.04 m
- To
- 48.06 m
- Intercept Depth
- 47.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-600:47.04-48.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.42 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.42 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.42”
Context: KL-22-600
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-600Klaza · zincGrade: 0.97Grade Unit: %Intercept: 1.02 mView all detailsHide details
Identity
- Hole ID
- KL-22-600
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.97
- Grade Unit
- %
- Intercept
- 1.02 m
- From
- 47.04 m
- To
- 48.06 m
- Intercept Depth
- 47.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-600:47.04-48.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.97 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.0 %·m is below.
Negative factors
- 0.97 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.97”
Context: KL-22-600
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 11.16Grade Unit: g/tIntercept: 2.14 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 11.16
- Grade Unit
- g/t
- Intercept
- 2.14 m
- From
- 113.3 m
- To
- 115.44 m
- Intercept Depth
- 113.3 m
Classification
- Sample Type
- drill
- Group ID
- and:113.3-115.44
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 11.16 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 23.9 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 11.16 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.16”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 23.5Grade Unit: g/tIntercept: 2.14 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 23.5
- Grade Unit
- g/t
- Intercept
- 2.14 m
- From
- 113.3 m
- To
- 115.44 m
- Intercept Depth
- 113.3 m
Classification
- Sample Type
- drill
- Group ID
- and:113.3-115.44
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 23.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 50.3 g/t·m is below.
Negative factors
- 23.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“23.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.38Grade Unit: %Intercept: 2.14 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.38
- Grade Unit
- %
- Intercept
- 2.14 m
- From
- 113.3 m
- To
- 115.44 m
- Intercept Depth
- 113.3 m
Classification
- Sample Type
- drill
- Group ID
- and:113.3-115.44
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.38 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.38 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.38”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.25Grade Unit: %Intercept: 2.14 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.25
- Grade Unit
- %
- Intercept
- 2.14 m
- From
- 113.3 m
- To
- 115.44 m
- Intercept Depth
- 113.3 m
Classification
- Sample Type
- drill
- Group ID
- and:113.3-115.44
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.25 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 2.7 %·m is below.
Negative factors
- 1.25 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.25”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 4.23Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.23
- Grade Unit
- g/t
- Intercept
- 0.88 m
- From
- 248.12 m
- To
- 249 m
- Intercept Depth
- 248.12 m
Classification
- Sample Type
- drill
- Group ID
- and:248.12-249
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.23 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.7 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.23 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.23”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 58Grade Unit: g/tIntercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 58
- Grade Unit
- g/t
- Intercept
- 0.88 m
- From
- 248.12 m
- To
- 249 m
- Intercept Depth
- 248.12 m
Classification
- Sample Type
- drill
- Group ID
- and:248.12-249
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 58 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 51.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“58.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.03Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.88 m
- From
- 248.12 m
- To
- 249 m
- Intercept Depth
- 248.12 m
Classification
- Sample Type
- drill
- Group ID
- and:248.12-249
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.03Grade Unit: %Intercept: 0.88 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 0.88 m
- From
- 248.12 m
- To
- 249 m
- Intercept Depth
- 248.12 m
Classification
- Sample Type
- drill
- Group ID
- and:248.12-249
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-602Klaza · goldGrade: 4.73Grade Unit: g/tIntercept: 0.67 mView all detailsHide details
Identity
- Hole ID
- KL-22-602
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.73
- Grade Unit
- g/t
- Intercept
- 0.67 m
- From
- 170.7 m
- To
- 171.37 m
- Intercept Depth
- 170.7 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-602:170.7-171.37
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.73 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.2 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.73 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.73”
Context: KL-22-602
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-602Klaza · silverGrade: 77.5Grade Unit: g/tIntercept: 0.67 mView all detailsHide details
Identity
- Hole ID
- KL-22-602
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 77.5
- Grade Unit
- g/t
- Intercept
- 0.67 m
- From
- 170.7 m
- To
- 171.37 m
- Intercept Depth
- 170.7 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-602:170.7-171.37
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 77.5 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 51.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“77.5”
Context: KL-22-602
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-602Klaza · leadGrade: 0.7Grade Unit: %Intercept: 0.67 mView all detailsHide details
Identity
- Hole ID
- KL-22-602
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 0.67 m
- From
- 170.7 m
- To
- 171.37 m
- Intercept Depth
- 170.7 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-602:170.7-171.37
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.7 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.70”
Context: KL-22-602
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-602Klaza · zincGrade: 2.48Grade Unit: %Intercept: 0.67 mView all detailsHide details
Identity
- Hole ID
- KL-22-602
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.48
- Grade Unit
- %
- Intercept
- 0.67 m
- From
- 170.7 m
- To
- 171.37 m
- Intercept Depth
- 170.7 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-602:170.7-171.37
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.48 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 1.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.48”
Context: KL-22-602
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 4.24Grade Unit: g/tIntercept: 3.81 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.24
- Grade Unit
- g/t
- Intercept
- 3.81 m
- From
- 270.97 m
- To
- 274.78 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- and:270.97-274.78
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.24 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 16.2 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 4.24 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.24”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 37.5Grade Unit: g/tIntercept: 3.81 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 37.5
- Grade Unit
- g/t
- Intercept
- 3.81 m
- From
- 270.97 m
- To
- 274.78 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- and:270.97-274.78
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 37.5 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 142.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“37.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.1Grade Unit: %Intercept: 3.81 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 3.81 m
- From
- 270.97 m
- To
- 274.78 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- and:270.97-274.78
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.1 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.23Grade Unit: %Intercept: 3.81 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 3.81 m
- From
- 270.97 m
- To
- 274.78 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- and:270.97-274.78
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.23 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 5.79Grade Unit: g/tIntercept: 2.34 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.79
- Grade Unit
- g/t
- Intercept
- 2.34 m
- From
- 270.97 m
- To
- 273.31 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- incl.:270.97-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.79 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 13.5 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.79 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.79”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 56Grade Unit: g/tIntercept: 2.34 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 56
- Grade Unit
- g/t
- Intercept
- 2.34 m
- From
- 270.97 m
- To
- 273.31 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- incl.:270.97-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 56 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 131.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“56.0”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 0.12Grade Unit: %Intercept: 2.34 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 2.34 m
- From
- 270.97 m
- To
- 273.31 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- incl.:270.97-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.12 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 0.19Grade Unit: %Intercept: 2.34 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 2.34 m
- From
- 270.97 m
- To
- 273.31 m
- Intercept Depth
- 270.97 m
Classification
- Sample Type
- drill
- Group ID
- incl.:270.97-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · goldGrade: 8.66Grade Unit: g/tIntercept: 1.31 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 8.66
- Grade Unit
- g/t
- Intercept
- 1.31 m
- From
- 272 m
- To
- 273.31 m
- Intercept Depth
- 272 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:272-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 8.66 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 11.3 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 8.66 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.66”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · silverGrade: 85.1Grade Unit: g/tIntercept: 1.31 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 85.1
- Grade Unit
- g/t
- Intercept
- 1.31 m
- From
- 272 m
- To
- 273.31 m
- Intercept Depth
- 272 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:272-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 85.1 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 111.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“85.1”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · leadGrade: 0.19Grade Unit: %Intercept: 1.31 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 1.31 m
- From
- 272 m
- To
- 273.31 m
- Intercept Depth
- 272 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:272-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.19 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · zincGrade: 0.19Grade Unit: %Intercept: 1.31 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 1.31 m
- From
- 272 m
- To
- 273.31 m
- Intercept Depth
- 272 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:272-273.31
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.79Grade Unit: g/tIntercept: 0.97 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.79
- Grade Unit
- g/t
- Intercept
- 0.97 m
- From
- 333.67 m
- To
- 334.64 m
- Intercept Depth
- 333.67 m
Classification
- Sample Type
- drill
- Group ID
- and:333.67-334.64
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.79 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.7 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.79”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 37.6Grade Unit: g/tIntercept: 0.97 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 37.6
- Grade Unit
- g/t
- Intercept
- 0.97 m
- From
- 333.67 m
- To
- 334.64 m
- Intercept Depth
- 333.67 m
Classification
- Sample Type
- drill
- Group ID
- and:333.67-334.64
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 37.6 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 36.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“37.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.92Grade Unit: %Intercept: 0.97 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.92
- Grade Unit
- %
- Intercept
- 0.97 m
- From
- 333.67 m
- To
- 334.64 m
- Intercept Depth
- 333.67 m
Classification
- Sample Type
- drill
- Group ID
- and:333.67-334.64
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.92 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.92 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.92”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.34Grade Unit: %Intercept: 0.97 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 0.97 m
- From
- 333.67 m
- To
- 334.64 m
- Intercept Depth
- 333.67 m
Classification
- Sample Type
- drill
- Group ID
- and:333.67-334.64
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 1.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.46Grade Unit: g/tIntercept: 0.78 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.46
- Grade Unit
- g/t
- Intercept
- 0.78 m
- From
- 346.46 m
- To
- 347.24 m
- Intercept Depth
- 346.46 m
Classification
- Sample Type
- drill
- Group ID
- and:346.46-347.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.46 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.9 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.46 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.46”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 85.6Grade Unit: g/tIntercept: 0.78 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 85.6
- Grade Unit
- g/t
- Intercept
- 0.78 m
- From
- 346.46 m
- To
- 347.24 m
- Intercept Depth
- 346.46 m
Classification
- Sample Type
- drill
- Group ID
- and:346.46-347.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 85.6 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 66.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“85.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 1.87Grade Unit: %Intercept: 0.78 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.87
- Grade Unit
- %
- Intercept
- 0.78 m
- From
- 346.46 m
- To
- 347.24 m
- Intercept Depth
- 346.46 m
Classification
- Sample Type
- drill
- Group ID
- and:346.46-347.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.87 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.87”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.65Grade Unit: %Intercept: 0.78 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.65
- Grade Unit
- %
- Intercept
- 0.78 m
- From
- 346.46 m
- To
- 347.24 m
- Intercept Depth
- 346.46 m
Classification
- Sample Type
- drill
- Group ID
- and:346.46-347.24
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.65 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 1.65 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.65”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-603Klaza · goldGrade: 2.13Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- KL-22-603
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.13
- Grade Unit
- g/t
- Intercept
- 1.53 m
- From
- 19.81 m
- To
- 21.34 m
- Intercept Depth
- 19.81 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-603:19.81-21.34
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.13 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.3 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.13 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.13”
Context: KL-22-603
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-603Klaza · silverGrade: 13.3Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- KL-22-603
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 13.3
- Grade Unit
- g/t
- Intercept
- 1.53 m
- From
- 19.81 m
- To
- 21.34 m
- Intercept Depth
- 19.81 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-603:19.81-21.34
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 13.3 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 20.3 g/t·m is below.
Negative factors
- 13.3 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.3”
Context: KL-22-603
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-603Klaza · leadGrade: 0.02Grade Unit: %Intercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- KL-22-603
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.53 m
- From
- 19.81 m
- To
- 21.34 m
- Intercept Depth
- 19.81 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-603:19.81-21.34
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: KL-22-603
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-603Klaza · zincGrade: 0.03Grade Unit: %Intercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- KL-22-603
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.53 m
- From
- 19.81 m
- To
- 21.34 m
- Intercept Depth
- 19.81 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-603:19.81-21.34
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: KL-22-603
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 5.48Grade Unit: g/tIntercept: 5.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.48
- Grade Unit
- g/t
- Intercept
- 5.85 m
- From
- 45.21 m
- To
- 51.06 m
- Intercept Depth
- 45.21 m
Classification
- Sample Type
- drill
- Group ID
- and:45.21-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.48 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 32.1 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.48 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.48”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 128Grade Unit: g/tIntercept: 5.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 128
- Grade Unit
- g/t
- Intercept
- 5.85 m
- From
- 45.21 m
- To
- 51.06 m
- Intercept Depth
- 45.21 m
Classification
- Sample Type
- drill
- Group ID
- and:45.21-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 128 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 748.8 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“128.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.44Grade Unit: %Intercept: 5.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.44
- Grade Unit
- %
- Intercept
- 5.85 m
- From
- 45.21 m
- To
- 51.06 m
- Intercept Depth
- 45.21 m
Classification
- Sample Type
- drill
- Group ID
- and:45.21-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.44 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 2.6 %·m is below.
Negative factors
- 0.44 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.44”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.7Grade Unit: %Intercept: 5.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.7
- Grade Unit
- %
- Intercept
- 5.85 m
- From
- 45.21 m
- To
- 51.06 m
- Intercept Depth
- 45.21 m
Classification
- Sample Type
- drill
- Group ID
- and:45.21-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.7 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 4.1 %·m is below.
Negative factors
- 0.7 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.70”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 11.96Grade Unit: g/tIntercept: 2.57 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 11.96
- Grade Unit
- g/t
- Intercept
- 2.57 m
- From
- 48.49 m
- To
- 51.06 m
- Intercept Depth
- 48.49 m
Classification
- Sample Type
- drill
- Group ID
- incl.:48.49-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 11.96 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 30.7 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 11.96 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.96”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 269.8Grade Unit: g/tIntercept: 2.57 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 269.8
- Grade Unit
- g/t
- Intercept
- 2.57 m
- From
- 48.49 m
- To
- 51.06 m
- Intercept Depth
- 48.49 m
Classification
- Sample Type
- drill
- Group ID
- incl.:48.49-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 269.8 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 693.4 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 269.8 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“269.8”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 0.59Grade Unit: %Intercept: 2.57 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.59
- Grade Unit
- %
- Intercept
- 2.57 m
- From
- 48.49 m
- To
- 51.06 m
- Intercept Depth
- 48.49 m
Classification
- Sample Type
- drill
- Group ID
- incl.:48.49-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.59 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.5 %·m is below.
Negative factors
- 0.59 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.59”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 1Grade Unit: %Intercept: 2.57 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1
- Grade Unit
- %
- Intercept
- 2.57 m
- From
- 48.49 m
- To
- 51.06 m
- Intercept Depth
- 48.49 m
Classification
- Sample Type
- drill
- Group ID
- incl.:48.49-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 2.6 %·m is below.
Negative factors
- 1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.00”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · goldGrade: 27.3Grade Unit: g/tIntercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 27.3
- Grade Unit
- g/t
- Intercept
- 0.77 m
- From
- 50.29 m
- To
- 51.06 m
- Intercept Depth
- 50.29 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:50.29-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 27.3 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 21.0 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 27.3 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27.30”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · silverGrade: 675Grade Unit: g/tIntercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 675
- Grade Unit
- g/t
- Intercept
- 0.77 m
- From
- 50.29 m
- To
- 51.06 m
- Intercept Depth
- 50.29 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:50.29-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 675 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 519.8 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 675 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“675.0”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · leadGrade: 1.56Grade Unit: %Intercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.56
- Grade Unit
- %
- Intercept
- 0.77 m
- From
- 50.29 m
- To
- 51.06 m
- Intercept Depth
- 50.29 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:50.29-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.56 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.56”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · zincGrade: 1.84Grade Unit: %Intercept: 0.77 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.84
- Grade Unit
- %
- Intercept
- 0.77 m
- From
- 50.29 m
- To
- 51.06 m
- Intercept Depth
- 50.29 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:50.29-51.06
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.84 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 1.84 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.84”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-609Klaza · goldGrade: 2.94Grade Unit: g/tIntercept: 3.08 mView all detailsHide details
Identity
- Hole ID
- KL-22-609
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.94
- Grade Unit
- g/t
- Intercept
- 3.08 m
- From
- 27.04 m
- To
- 30.12 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-609:27.04-30.12
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.94 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 9.1 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.94 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.94”
Context: KL-22-609
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-609Klaza · silverGrade: 18.8Grade Unit: g/tIntercept: 3.08 mView all detailsHide details
Identity
- Hole ID
- KL-22-609
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 18.8
- Grade Unit
- g/t
- Intercept
- 3.08 m
- From
- 27.04 m
- To
- 30.12 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-609:27.04-30.12
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 18.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 57.9 g/t·m is below.
Negative factors
- 18.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.8”
Context: KL-22-609
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-609Klaza · leadGrade: 0.01Grade Unit: %Intercept: 3.08 mView all detailsHide details
Identity
- Hole ID
- KL-22-609
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3.08 m
- From
- 27.04 m
- To
- 30.12 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-609:27.04-30.12
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: KL-22-609
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-609Klaza · zincGrade: 0.04Grade Unit: %Intercept: 3.08 mView all detailsHide details
Identity
- Hole ID
- KL-22-609
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 3.08 m
- From
- 27.04 m
- To
- 30.12 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-609:27.04-30.12
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: KL-22-609
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 11.25Grade Unit: g/tIntercept: 0.71 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 11.25
- Grade Unit
- g/t
- Intercept
- 0.71 m
- From
- 27.04 m
- To
- 27.75 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- and:27.04-27.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 11.25 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 8.0 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 11.25 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“11.25”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 66.1Grade Unit: g/tIntercept: 0.71 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 66.1
- Grade Unit
- g/t
- Intercept
- 0.71 m
- From
- 27.04 m
- To
- 27.75 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- and:27.04-27.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 66.1 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 46.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“66.1”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.16Grade Unit: %Intercept: 0.71 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 0.71 m
- From
- 27.04 m
- To
- 27.75 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- and:27.04-27.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.16 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.23Grade Unit: %Intercept: 0.71 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.23
- Grade Unit
- %
- Intercept
- 0.71 m
- From
- 27.04 m
- To
- 27.75 m
- Intercept Depth
- 27.04 m
Classification
- Sample Type
- drill
- Group ID
- and:27.04-27.75
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.23 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.9 %·m is below.
Negative factors
- 1.23 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.23”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-611Klaza · goldGrade: 2.56Grade Unit: g/tIntercept: 5.61 mView all detailsHide details
Identity
- Hole ID
- KL-22-611
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.56
- Grade Unit
- g/t
- Intercept
- 5.61 m
- From
- 18.85 m
- To
- 24.46 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-611:18.85-24.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.56 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 14.4 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 2.56 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.56”
Context: KL-22-611
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-611Klaza · silverGrade: 14.1Grade Unit: g/tIntercept: 5.61 mView all detailsHide details
Identity
- Hole ID
- KL-22-611
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 14.1
- Grade Unit
- g/t
- Intercept
- 5.61 m
- From
- 18.85 m
- To
- 24.46 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-611:18.85-24.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 14.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 79.1 g/t·m is below.
Negative factors
- 14.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.1”
Context: KL-22-611
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-611Klaza · leadGrade: 0.16Grade Unit: %Intercept: 5.61 mView all detailsHide details
Identity
- Hole ID
- KL-22-611
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 5.61 m
- From
- 18.85 m
- To
- 24.46 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-611:18.85-24.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.16 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: KL-22-611
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-611Klaza · zincGrade: 0.18Grade Unit: %Intercept: 5.61 mView all detailsHide details
Identity
- Hole ID
- KL-22-611
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 5.61 m
- From
- 18.85 m
- To
- 24.46 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-611:18.85-24.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.0 %·m is below.
Negative factors
- 0.18 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: KL-22-611
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 3.32Grade Unit: g/tIntercept: 3.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.32
- Grade Unit
- g/t
- Intercept
- 3.85 m
- From
- 18.85 m
- To
- 22.7 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:18.85-22.7
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.32 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 12.8 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 3.32 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.32”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 13.8Grade Unit: g/tIntercept: 3.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 13.8
- Grade Unit
- g/t
- Intercept
- 3.85 m
- From
- 18.85 m
- To
- 22.7 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:18.85-22.7
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 13.8 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 53.1 g/t·m is below.
Negative factors
- 13.8 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“13.8”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 0.12Grade Unit: %Intercept: 3.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.12
- Grade Unit
- %
- Intercept
- 3.85 m
- From
- 18.85 m
- To
- 22.7 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:18.85-22.7
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.12 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.12 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.12”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 0.2Grade Unit: %Intercept: 3.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 3.85 m
- From
- 18.85 m
- To
- 22.7 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:18.85-22.7
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.2 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.20”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · goldGrade: 5.13Grade Unit: g/tIntercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.13
- Grade Unit
- g/t
- Intercept
- 1.62 m
- From
- 18.85 m
- To
- 20.47 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:18.85-20.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.13 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 8.3 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.13 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.13”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · silverGrade: 18.5Grade Unit: g/tIntercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 18.5
- Grade Unit
- g/t
- Intercept
- 1.62 m
- From
- 18.85 m
- To
- 20.47 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:18.85-20.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 18.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 30.0 g/t·m is below.
Negative factors
- 18.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“18.5”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · leadGrade: 0.05Grade Unit: %Intercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.62 m
- From
- 18.85 m
- To
- 20.47 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:18.85-20.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · zincGrade: 0.07Grade Unit: %Intercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 1.62 m
- From
- 18.85 m
- To
- 20.47 m
- Intercept Depth
- 18.85 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:18.85-20.47
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.07 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-613Klaza · goldGrade: 1.26Grade Unit: g/tIntercept: 1.68 mView all detailsHide details
Identity
- Hole ID
- KL-22-613
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 1.68 m
- From
- 25 m
- To
- 26.68 m
- Intercept Depth
- 25 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-613:25-26.68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.26 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.1 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.26”
Context: KL-22-613
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-613Klaza · silverGrade: 4.1Grade Unit: g/tIntercept: 1.68 mView all detailsHide details
Identity
- Hole ID
- KL-22-613
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.1
- Grade Unit
- g/t
- Intercept
- 1.68 m
- From
- 25 m
- To
- 26.68 m
- Intercept Depth
- 25 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-613:25-26.68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.9 g/t·m is below.
Negative factors
- 4.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.1”
Context: KL-22-613
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-613Klaza · leadGrade: 0.08Grade Unit: %Intercept: 1.68 mView all detailsHide details
Identity
- Hole ID
- KL-22-613
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1.68 m
- From
- 25 m
- To
- 26.68 m
- Intercept Depth
- 25 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-613:25-26.68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.08 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: KL-22-613
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-613Klaza · zincGrade: 0.19Grade Unit: %Intercept: 1.68 mView all detailsHide details
Identity
- Hole ID
- KL-22-613
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 1.68 m
- From
- 25 m
- To
- 26.68 m
- Intercept Depth
- 25 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-613:25-26.68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.19 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: KL-22-613
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 5.7Grade Unit: g/tIntercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.7
- Grade Unit
- g/t
- Intercept
- 0.52 m
- From
- 47.94 m
- To
- 48.46 m
- Intercept Depth
- 47.94 m
Classification
- Sample Type
- drill
- Group ID
- and:47.94-48.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.7 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.0 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 5.7 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.70”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 160Grade Unit: g/tIntercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 160
- Grade Unit
- g/t
- Intercept
- 0.52 m
- From
- 47.94 m
- To
- 48.46 m
- Intercept Depth
- 47.94 m
Classification
- Sample Type
- drill
- Group ID
- and:47.94-48.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 160 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 83.2 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“160.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.22Grade Unit: %Intercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 0.52 m
- From
- 47.94 m
- To
- 48.46 m
- Intercept Depth
- 47.94 m
Classification
- Sample Type
- drill
- Group ID
- and:47.94-48.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.22 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.22 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.22”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.15Grade Unit: %Intercept: 0.52 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.15
- Grade Unit
- %
- Intercept
- 0.52 m
- From
- 47.94 m
- To
- 48.46 m
- Intercept Depth
- 47.94 m
Classification
- Sample Type
- drill
- Group ID
- and:47.94-48.46
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.15 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.6 %·m is below.
Negative factors
- 1.15 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.15”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 4.5Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.5
- Grade Unit
- g/t
- Intercept
- 1.53 m
- From
- 60.95 m
- To
- 62.48 m
- Intercept Depth
- 60.95 m
Classification
- Sample Type
- drill
- Group ID
- and:60.95-62.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.5 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 6.9 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.5 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.50”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 12.7Grade Unit: g/tIntercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 12.7
- Grade Unit
- g/t
- Intercept
- 1.53 m
- From
- 60.95 m
- To
- 62.48 m
- Intercept Depth
- 60.95 m
Classification
- Sample Type
- drill
- Group ID
- and:60.95-62.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 12.7 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 19.4 g/t·m is below.
Negative factors
- 12.7 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.7”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.02Grade Unit: %Intercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 1.53 m
- From
- 60.95 m
- To
- 62.48 m
- Intercept Depth
- 60.95 m
Classification
- Sample Type
- drill
- Group ID
- and:60.95-62.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.02 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.06Grade Unit: %Intercept: 1.53 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 1.53 m
- From
- 60.95 m
- To
- 62.48 m
- Intercept Depth
- 60.95 m
Classification
- Sample Type
- drill
- Group ID
- and:60.95-62.48
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.06 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.54Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.54
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 75.85 m
- To
- 79.25 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- and:75.85-79.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.54 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 8.6 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.54 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.54”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 165.4Grade Unit: g/tIntercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 165.4
- Grade Unit
- g/t
- Intercept
- 3.4 m
- From
- 75.85 m
- To
- 79.25 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- and:75.85-79.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 165.4 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 562.4 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“165.4”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.17Grade Unit: %Intercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 3.4 m
- From
- 75.85 m
- To
- 79.25 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- and:75.85-79.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.17 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.26Grade Unit: %Intercept: 3.4 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 3.4 m
- From
- 75.85 m
- To
- 79.25 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- and:75.85-79.25
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.26 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.26 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.26”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 4.7Grade Unit: g/tIntercept: 1.43 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.7
- Grade Unit
- g/t
- Intercept
- 1.43 m
- From
- 75.85 m
- To
- 77.28 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:75.85-77.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.7 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 6.7 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 4.7 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.70”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 274Grade Unit: g/tIntercept: 1.43 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 274
- Grade Unit
- g/t
- Intercept
- 1.43 m
- From
- 75.85 m
- To
- 77.28 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:75.85-77.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 274 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 391.8 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 274 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“274.0”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 0.3Grade Unit: %Intercept: 1.43 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 1.43 m
- From
- 75.85 m
- To
- 77.28 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:75.85-77.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.3 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 0.51Grade Unit: %Intercept: 1.43 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 1.43 m
- From
- 75.85 m
- To
- 77.28 m
- Intercept Depth
- 75.85 m
Classification
- Sample Type
- drill
- Group ID
- incl.:75.85-77.28
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.51 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.51 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.51”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-616Klaza · goldGrade: 1.17Grade Unit: g/tIntercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KL-22-616
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.17
- Grade Unit
- g/t
- Intercept
- 1.03 m
- From
- 27.3 m
- To
- 28.33 m
- Intercept Depth
- 27.3 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-616:27.3-28.33
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.17 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.2 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.17”
Context: KL-22-616
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-616Klaza · silverGrade: 6.4Grade Unit: g/tIntercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KL-22-616
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.4
- Grade Unit
- g/t
- Intercept
- 1.03 m
- From
- 27.3 m
- To
- 28.33 m
- Intercept Depth
- 27.3 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-616:27.3-28.33
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.6 g/t·m is below.
Negative factors
- 6.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.4”
Context: KL-22-616
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-616Klaza · leadGrade: 0.14Grade Unit: %Intercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KL-22-616
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 1.03 m
- From
- 27.3 m
- To
- 28.33 m
- Intercept Depth
- 27.3 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-616:27.3-28.33
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.14 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: KL-22-616
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-616Klaza · zincGrade: 0.24Grade Unit: %Intercept: 1.03 mView all detailsHide details
Identity
- Hole ID
- KL-22-616
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 1.03 m
- From
- 27.3 m
- To
- 28.33 m
- Intercept Depth
- 27.3 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-616:27.3-28.33
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.24 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: KL-22-616
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.24Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.24
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 31.42 m
- To
- 32.32 m
- Intercept Depth
- 31.42 m
Classification
- Sample Type
- drill
- Group ID
- and:31.42-32.32
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.24 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.1 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.24”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 6.5Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.5
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 31.42 m
- To
- 32.32 m
- Intercept Depth
- 31.42 m
Classification
- Sample Type
- drill
- Group ID
- and:31.42-32.32
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.5 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 5.9 g/t·m is below.
Negative factors
- 6.5 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.5”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.11Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 31.42 m
- To
- 32.32 m
- Intercept Depth
- 31.42 m
Classification
- Sample Type
- drill
- Group ID
- and:31.42-32.32
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.11 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.43Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.43
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 31.42 m
- To
- 32.32 m
- Intercept Depth
- 31.42 m
Classification
- Sample Type
- drill
- Group ID
- and:31.42-32.32
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.43 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.43 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.43”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 2.04Grade Unit: g/tIntercept: 0.92 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.04
- Grade Unit
- g/t
- Intercept
- 0.92 m
- From
- 64.35 m
- To
- 65.27 m
- Intercept Depth
- 64.35 m
Classification
- Sample Type
- drill
- Group ID
- and:64.35-65.27
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.04 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.9 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.04 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.04”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 25.4Grade Unit: g/tIntercept: 0.92 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 25.4
- Grade Unit
- g/t
- Intercept
- 0.92 m
- From
- 64.35 m
- To
- 65.27 m
- Intercept Depth
- 64.35 m
Classification
- Sample Type
- drill
- Group ID
- and:64.35-65.27
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 25.4 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 23.4 g/t·m is below.
Negative factors
- 25.4 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“25.4”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.76Grade Unit: %Intercept: 0.92 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 0.92 m
- From
- 64.35 m
- To
- 65.27 m
- Intercept Depth
- 64.35 m
Classification
- Sample Type
- drill
- Group ID
- and:64.35-65.27
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.76 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.76 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.76”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.82Grade Unit: %Intercept: 0.92 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.82
- Grade Unit
- %
- Intercept
- 0.92 m
- From
- 64.35 m
- To
- 65.27 m
- Intercept Depth
- 64.35 m
Classification
- Sample Type
- drill
- Group ID
- and:64.35-65.27
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.82 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.7 %·m is below.
Negative factors
- 1.82 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.82”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 0.77Grade Unit: g/tIntercept: 4.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 4.85 m
- From
- 134.11 m
- To
- 138.96 m
- Intercept Depth
- 134.11 m
Classification
- Sample Type
- drill
- Group ID
- and:134.11-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.77 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 3.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.77”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 60.2Grade Unit: g/tIntercept: 4.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 60.2
- Grade Unit
- g/t
- Intercept
- 4.85 m
- From
- 134.11 m
- To
- 138.96 m
- Intercept Depth
- 134.11 m
Classification
- Sample Type
- drill
- Group ID
- and:134.11-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 60.2 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 292.0 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“60.2”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.37Grade Unit: %Intercept: 4.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 4.85 m
- From
- 134.11 m
- To
- 138.96 m
- Intercept Depth
- 134.11 m
Classification
- Sample Type
- drill
- Group ID
- and:134.11-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.8 %·m is below.
Negative factors
- 0.37 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.77Grade Unit: %Intercept: 4.85 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.77
- Grade Unit
- %
- Intercept
- 4.85 m
- From
- 134.11 m
- To
- 138.96 m
- Intercept Depth
- 134.11 m
Classification
- Sample Type
- drill
- Group ID
- and:134.11-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.77 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.7 %·m is below.
Negative factors
- 0.77 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.77”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 1.26Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.26
- Grade Unit
- g/t
- Intercept
- 1.8 m
- From
- 137.16 m
- To
- 138.96 m
- Intercept Depth
- 137.16 m
Classification
- Sample Type
- drill
- Group ID
- incl.:137.16-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.26 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.3 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.26”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 125.7Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 125.7
- Grade Unit
- g/t
- Intercept
- 1.8 m
- From
- 137.16 m
- To
- 138.96 m
- Intercept Depth
- 137.16 m
Classification
- Sample Type
- drill
- Group ID
- incl.:137.16-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 125.7 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 226.3 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“125.7”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 0.35Grade Unit: %Intercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1.8 m
- From
- 137.16 m
- To
- 138.96 m
- Intercept Depth
- 137.16 m
Classification
- Sample Type
- drill
- Group ID
- incl.:137.16-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.6 %·m is below.
Negative factors
- 0.35 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 0.58Grade Unit: %Intercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 1.8 m
- From
- 137.16 m
- To
- 138.96 m
- Intercept Depth
- 137.16 m
Classification
- Sample Type
- drill
- Group ID
- incl.:137.16-138.96
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.58 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.0 %·m is below.
Negative factors
- 0.58 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.58”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 4.47Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 4.47
- Grade Unit
- g/t
- Intercept
- 2.25 m
- From
- 323.93 m
- To
- 326.18 m
- Intercept Depth
- 323.93 m
Classification
- Sample Type
- drill
- Group ID
- and:323.93-326.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 4.47 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 10.1 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 4.47 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.47”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 77.4Grade Unit: g/tIntercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 77.4
- Grade Unit
- g/t
- Intercept
- 2.25 m
- From
- 323.93 m
- To
- 326.18 m
- Intercept Depth
- 323.93 m
Classification
- Sample Type
- drill
- Group ID
- and:323.93-326.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 77.4 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 174.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“77.4”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.58Grade Unit: %Intercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.58
- Grade Unit
- %
- Intercept
- 2.25 m
- From
- 323.93 m
- To
- 326.18 m
- Intercept Depth
- 323.93 m
Classification
- Sample Type
- drill
- Group ID
- and:323.93-326.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.58 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.3 %·m is below.
Negative factors
- 0.58 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.58”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.42Grade Unit: %Intercept: 2.25 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.42
- Grade Unit
- %
- Intercept
- 2.25 m
- From
- 323.93 m
- To
- 326.18 m
- Intercept Depth
- 323.93 m
Classification
- Sample Type
- drill
- Group ID
- and:323.93-326.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.42 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.2 %·m is below.
Negative factors
- 1.42 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.42”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 7.83Grade Unit: g/tIntercept: 1.08 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 7.83
- Grade Unit
- g/t
- Intercept
- 1.08 m
- From
- 324.52 m
- To
- 325.6 m
- Intercept Depth
- 324.52 m
Classification
- Sample Type
- drill
- Group ID
- incl.:324.52-325.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 7.83 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 8.5 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 7.83 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.83”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 146Grade Unit: g/tIntercept: 1.08 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 146
- Grade Unit
- g/t
- Intercept
- 1.08 m
- From
- 324.52 m
- To
- 325.6 m
- Intercept Depth
- 324.52 m
Classification
- Sample Type
- drill
- Group ID
- incl.:324.52-325.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 146 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 157.7 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“146.0”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 1.12Grade Unit: %Intercept: 1.08 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.12
- Grade Unit
- %
- Intercept
- 1.08 m
- From
- 324.52 m
- To
- 325.6 m
- Intercept Depth
- 324.52 m
Classification
- Sample Type
- drill
- Group ID
- incl.:324.52-325.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.12 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.12”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 2.67Grade Unit: %Intercept: 1.08 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.67
- Grade Unit
- %
- Intercept
- 1.08 m
- From
- 324.52 m
- To
- 325.6 m
- Intercept Depth
- 324.52 m
Classification
- Sample Type
- drill
- Group ID
- incl.:324.52-325.6
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.67 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 2.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.67”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 6.83Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 6.83
- Grade Unit
- g/t
- Intercept
- 0.66 m
- From
- 338.33 m
- To
- 338.99 m
- Intercept Depth
- 338.33 m
Classification
- Sample Type
- drill
- Group ID
- and:338.33-338.99
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 6.83 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.5 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 6.83 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.83”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 211Grade Unit: g/tIntercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 211
- Grade Unit
- g/t
- Intercept
- 0.66 m
- From
- 338.33 m
- To
- 338.99 m
- Intercept Depth
- 338.33 m
Classification
- Sample Type
- drill
- Group ID
- and:338.33-338.99
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 211 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 139.3 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 211 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“211.0”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.55Grade Unit: %Intercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.66 m
- From
- 338.33 m
- To
- 338.99 m
- Intercept Depth
- 338.33 m
Classification
- Sample Type
- drill
- Group ID
- and:338.33-338.99
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.55 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.63Grade Unit: %Intercept: 0.66 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.63
- Grade Unit
- %
- Intercept
- 0.66 m
- From
- 338.33 m
- To
- 338.99 m
- Intercept Depth
- 338.33 m
Classification
- Sample Type
- drill
- Group ID
- and:338.33-338.99
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.63 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.63 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.63”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-605Klaza · goldGrade: 14.73Grade Unit: g/tIntercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- KL-22-605
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 14.73
- Grade Unit
- g/t
- Intercept
- 1.62 m
- From
- 54.56 m
- To
- 56.18 m
- Intercept Depth
- 54.56 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-605:54.56-56.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 14.73 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 23.9 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 14.73 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.73”
Context: KL-22-605
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-605Klaza · silverGrade: 89.2Grade Unit: g/tIntercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- KL-22-605
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 89.2
- Grade Unit
- g/t
- Intercept
- 1.62 m
- From
- 54.56 m
- To
- 56.18 m
- Intercept Depth
- 54.56 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-605:54.56-56.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 89.2 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 144.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“89.2”
Context: KL-22-605
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-605Klaza · leadGrade: 0.76Grade Unit: %Intercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- KL-22-605
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 1.62 m
- From
- 54.56 m
- To
- 56.18 m
- Intercept Depth
- 54.56 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-605:54.56-56.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.76 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.2 %·m is below.
Negative factors
- 0.76 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.76”
Context: KL-22-605
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-605Klaza · zincGrade: 3.33Grade Unit: %Intercept: 1.62 mView all detailsHide details
Identity
- Hole ID
- KL-22-605
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.33
- Grade Unit
- %
- Intercept
- 1.62 m
- From
- 54.56 m
- To
- 56.18 m
- Intercept Depth
- 54.56 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-605:54.56-56.18
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.33 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 5.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.33”
Context: KL-22-605
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 7.36Grade Unit: g/tIntercept: 5.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 7.36
- Grade Unit
- g/t
- Intercept
- 5.7 m
- From
- 60.33 m
- To
- 66.03 m
- Intercept Depth
- 60.33 m
Classification
- Sample Type
- drill
- Group ID
- and:60.33-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 7.36 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 42.0 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 7.36 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.36”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 136.2Grade Unit: g/tIntercept: 5.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 136.2
- Grade Unit
- g/t
- Intercept
- 5.7 m
- From
- 60.33 m
- To
- 66.03 m
- Intercept Depth
- 60.33 m
Classification
- Sample Type
- drill
- Group ID
- and:60.33-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 136.2 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 776.3 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“136.2”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 1.29Grade Unit: %Intercept: 5.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.29
- Grade Unit
- %
- Intercept
- 5.7 m
- From
- 60.33 m
- To
- 66.03 m
- Intercept Depth
- 60.33 m
Classification
- Sample Type
- drill
- Group ID
- and:60.33-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.29 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 7.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.29”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 1.02Grade Unit: %Intercept: 5.7 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.02
- Grade Unit
- %
- Intercept
- 5.7 m
- From
- 60.33 m
- To
- 66.03 m
- Intercept Depth
- 60.33 m
Classification
- Sample Type
- drill
- Group ID
- and:60.33-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.02 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.8 %·m is below.
Negative factors
- 1.02 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.02”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 37.3Grade Unit: g/tIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 37.3
- Grade Unit
- g/t
- Intercept
- 0.35 m
- From
- 65.68 m
- To
- 66.03 m
- Intercept Depth
- 65.68 m
Classification
- Sample Type
- drill
- Group ID
- incl.:65.68-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 37.3 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 13.1 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 37.3 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“37.30”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 525Grade Unit: g/tIntercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 525
- Grade Unit
- g/t
- Intercept
- 0.35 m
- From
- 65.68 m
- To
- 66.03 m
- Intercept Depth
- 65.68 m
Classification
- Sample Type
- drill
- Group ID
- incl.:65.68-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 525 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 183.8 g/t·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 525 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“525.0”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 3.68Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 3.68
- Grade Unit
- %
- Intercept
- 0.35 m
- From
- 65.68 m
- To
- 66.03 m
- Intercept Depth
- 65.68 m
Classification
- Sample Type
- drill
- Group ID
- incl.:65.68-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 3.68 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 1.3 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.68”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 5.63Grade Unit: %Intercept: 0.35 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 5.63
- Grade Unit
- %
- Intercept
- 0.35 m
- From
- 65.68 m
- To
- 66.03 m
- Intercept Depth
- 65.68 m
Classification
- Sample Type
- drill
- Group ID
- incl.:65.68-66.03
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 5.63 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 2.0 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“5.63”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.1Grade Unit: g/tIntercept: 1.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1.46 m
- From
- 66.54 m
- To
- 68 m
- Intercept Depth
- 66.54 m
Classification
- Sample Type
- drill
- Group ID
- and:66.54-68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.1 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.6 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 20.2Grade Unit: g/tIntercept: 1.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 20.2
- Grade Unit
- g/t
- Intercept
- 1.46 m
- From
- 66.54 m
- To
- 68 m
- Intercept Depth
- 66.54 m
Classification
- Sample Type
- drill
- Group ID
- and:66.54-68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 20.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 29.5 g/t·m is below.
Negative factors
- 20.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.2”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.09Grade Unit: %Intercept: 1.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.46 m
- From
- 66.54 m
- To
- 68 m
- Intercept Depth
- 66.54 m
Classification
- Sample Type
- drill
- Group ID
- and:66.54-68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.09 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.1Grade Unit: %Intercept: 1.46 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 1.46 m
- From
- 66.54 m
- To
- 68 m
- Intercept Depth
- 66.54 m
Classification
- Sample Type
- drill
- Group ID
- and:66.54-68
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · goldGrade: 1.51Grade Unit: g/tIntercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.51
- Grade Unit
- g/t
- Intercept
- 0.63 m
- From
- 71 m
- To
- 71.63 m
- Intercept Depth
- 71 m
Classification
- Sample Type
- drill
- Group ID
- and:71-71.63
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.51 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.0 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.51”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · silverGrade: 46.6Grade Unit: g/tIntercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 46.6
- Grade Unit
- g/t
- Intercept
- 0.63 m
- From
- 71 m
- To
- 71.63 m
- Intercept Depth
- 71 m
Classification
- Sample Type
- drill
- Group ID
- and:71-71.63
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 46.6 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 29.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“46.6”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · leadGrade: 0.61Grade Unit: %Intercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.61
- Grade Unit
- %
- Intercept
- 0.63 m
- From
- 71 m
- To
- 71.63 m
- Intercept Depth
- 71 m
Classification
- Sample Type
- drill
- Group ID
- and:71-71.63
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.61 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.61 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.61”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
andKlaza · zincGrade: 0.37Grade Unit: %Intercept: 0.63 mView all detailsHide details
Identity
- Hole ID
- and
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 0.63 m
- From
- 71 m
- To
- 71.63 m
- Intercept Depth
- 71 m
Classification
- Sample Type
- drill
- Group ID
- and:71-71.63
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.37 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: and
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-622Klaza · goldGrade: 2.85Grade Unit: g/tIntercept: 33.96 mView all detailsHide details
Identity
- Hole ID
- KL-22-622
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.85
- Grade Unit
- g/t
- Intercept
- 33.96 m
- From
- 73.18 m
- To
- 107.14 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-622:73.18-107.14
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.85 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 96.8 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 2.85 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.85”
Context: KL-22-622
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-622Klaza · silverGrade: 41.5Grade Unit: g/tIntercept: 33.96 mView all detailsHide details
Identity
- Hole ID
- KL-22-622
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 41.5
- Grade Unit
- g/t
- Intercept
- 33.96 m
- From
- 73.18 m
- To
- 107.14 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-622:73.18-107.14
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 41.5 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1409.3 g/t·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“41.5”
Context: KL-22-622
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-622Klaza · leadGrade: 0.17Grade Unit: %Intercept: 33.96 mView all detailsHide details
Identity
- Hole ID
- KL-22-622
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.17
- Grade Unit
- %
- Intercept
- 33.96 m
- From
- 73.18 m
- To
- 107.14 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-622:73.18-107.14
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 5.8 %·m is below.
Negative factors
- 0.17 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: KL-22-622
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
KL-22-622Klaza · zincGrade: 0.16Grade Unit: %Intercept: 33.96 mView all detailsHide details
Identity
- Hole ID
- KL-22-622
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 33.96 m
- From
- 73.18 m
- To
- 107.14 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- KL-22-622:73.18-107.14
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.4 %·m is below.
Negative factors
- 0.16 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: KL-22-622
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 2.74Grade Unit: g/tIntercept: 1.66 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 2.74
- Grade Unit
- g/t
- Intercept
- 1.66 m
- From
- 73.18 m
- To
- 74.84 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- incl.:73.18-74.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 2.74 g/t gold is strong against the default band [5, 2, 1, 0.3] g/t. Grade×width 4.5 g/t·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 2.74 g/t gold is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.74”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 42.7Grade Unit: g/tIntercept: 1.66 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 42.7
- Grade Unit
- g/t
- Intercept
- 1.66 m
- From
- 73.18 m
- To
- 74.84 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- incl.:73.18-74.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 42.7 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 70.9 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“42.7”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 0.04Grade Unit: %Intercept: 1.66 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.66 m
- From
- 73.18 m
- To
- 74.84 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- incl.:73.18-74.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.04 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 0.03Grade Unit: %Intercept: 1.66 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.66 m
- From
- 73.18 m
- To
- 74.84 m
- Intercept Depth
- 73.18 m
Classification
- Sample Type
- drill
- Group ID
- incl.:73.18-74.84
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.03 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 8.07Grade Unit: g/tIntercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 8.07
- Grade Unit
- g/t
- Intercept
- 1.85 m
- From
- 80.15 m
- To
- 82 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- incl.:80.15-82
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 8.07 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 14.9 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 8.07 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.07”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 496.7Grade Unit: g/tIntercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 496.7
- Grade Unit
- g/t
- Intercept
- 1.85 m
- From
- 80.15 m
- To
- 82 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- incl.:80.15-82
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 496.7 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 918.9 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 496.7 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“496.7”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 1.09Grade Unit: %Intercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.09
- Grade Unit
- %
- Intercept
- 1.85 m
- From
- 80.15 m
- To
- 82 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- incl.:80.15-82
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.09 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 2.0 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.09”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 0.51Grade Unit: %Intercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.51
- Grade Unit
- %
- Intercept
- 1.85 m
- From
- 80.15 m
- To
- 82 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- incl.:80.15-82
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.51 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.9 %·m is below.
Negative factors
- 0.51 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.51”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · goldGrade: 15Grade Unit: g/tIntercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 15
- Grade Unit
- g/t
- Intercept
- 0.93 m
- From
- 80.15 m
- To
- 81.08 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:80.15-81.08
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 15 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 14.0 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 15 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“15.00”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · silverGrade: 957Grade Unit: g/tIntercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 957
- Grade Unit
- g/t
- Intercept
- 0.93 m
- From
- 80.15 m
- To
- 81.08 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:80.15-81.08
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 957 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 890.0 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 957 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“957.0”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · leadGrade: 1.97Grade Unit: %Intercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.97
- Grade Unit
- %
- Intercept
- 0.93 m
- From
- 80.15 m
- To
- 81.08 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:80.15-81.08
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.97 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.8 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.97”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · zincGrade: 0.89Grade Unit: %Intercept: 0.93 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.89
- Grade Unit
- %
- Intercept
- 0.93 m
- From
- 80.15 m
- To
- 81.08 m
- Intercept Depth
- 80.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:80.15-81.08
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.89 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.8 %·m is below.
Negative factors
- 0.89 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.89”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · goldGrade: 42.06Grade Unit: g/tIntercept: 1.74 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 42.06
- Grade Unit
- g/t
- Intercept
- 1.74 m
- From
- 104.64 m
- To
- 106.38 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- incl.:104.64-106.38
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 42.06 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 73.2 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 42.06 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“42.06”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · silverGrade: 192.4Grade Unit: g/tIntercept: 1.74 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 192.4
- Grade Unit
- g/t
- Intercept
- 1.74 m
- From
- 104.64 m
- To
- 106.38 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- incl.:104.64-106.38
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 192.4 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 334.8 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“192.4”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · leadGrade: 1.31Grade Unit: %Intercept: 1.74 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 1.31
- Grade Unit
- %
- Intercept
- 1.74 m
- From
- 104.64 m
- To
- 106.38 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- incl.:104.64-106.38
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 1.31 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 2.3 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.31”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
incl.Klaza · zincGrade: 0.96Grade Unit: %Intercept: 1.74 mView all detailsHide details
Identity
- Hole ID
- incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.96
- Grade Unit
- %
- Intercept
- 1.74 m
- From
- 104.64 m
- To
- 106.38 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- incl.:104.64-106.38
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.96 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.7 %·m is below.
Negative factors
- 0.96 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.96”
Context: incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · goldGrade: 65.8Grade Unit: g/tIntercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 65.8
- Grade Unit
- g/t
- Intercept
- 1.07 m
- From
- 104.64 m
- To
- 105.71 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:104.64-105.71
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 65.8 g/t gold is exceptional against the default band [5, 2, 1, 0.3] g/t. Grade×width 70.4 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 65.8 g/t gold is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“65.80”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · silverGrade: 182Grade Unit: g/tIntercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 182
- Grade Unit
- g/t
- Intercept
- 1.07 m
- From
- 104.64 m
- To
- 105.71 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:104.64-105.71
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 182 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 194.7 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“182.0”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · leadGrade: 0.16Grade Unit: %Intercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.16
- Grade Unit
- %
- Intercept
- 1.07 m
- From
- 104.64 m
- To
- 105.71 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:104.64-105.71
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.16 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.16 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.16”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and incl.Klaza · zincGrade: 0.14Grade Unit: %Intercept: 1.07 mView all detailsHide details
Identity
- Hole ID
- and incl.
- Project
- Klaza
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- RK
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 1.07 m
- From
- 104.64 m
- To
- 105.71 m
- Intercept Depth
- 104.64 m
Classification
- Sample Type
- drill
- Group ID
- and incl.:104.64-105.71
- Mining Method
- mixed
QA/QC
- Laboratory
- ALS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-03-01T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.14 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: and incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.