Scottie Reports Broad and High-Grade Gold at the Blueberry Contact Zone 14.4 g/t Gold over 40.75 Metres and 42.5 g/t Gold over 4.40 Metres
Original announcement by tmx on
- Company
- Scottie Resources Corp.
- Ticker
- SCOT
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Gold
- Secondary commodities
- Silver
- Document categories
- Drill results
- Extracted
- 2026-09-14 23:00:39 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Scottie Resources reported final assays from its 2025 drill program at the Blueberry Contact Zone within the Scottie Gold Mine Project, highlighting broad and high-grade gold intercepts. Key results include 40.75 metres at 14.4 g/t gold and 4.40 metres at 42.5 g/t gold, with a bonanza sub-interval of 1.00 metre at 265.0 g/t gold. The company noted consistent high-grade gold across multiple zones, with nearly half of all holes returning strong gold grades, as it advances towards a Feasibility Study.
Reasoning: The drill program delivered multiple high-grade gold intercepts, including a very broad zone of 40.75m at 14.4 g/t gold and a bonanza grade of 265.0 g/t gold over 1.00m, confirming consistent mineralization within the Blueberry Contact Zone, which significantly enhances the project's prospectivity.
Positive factors
- Broad high-grade gold intercepts
- Bonanza gold grades
- Consistent high-grade results across multiple zones
- Strong grade-thickness products
- Comprehensive QA/QC disclosure
Negative factors
- True width of intercepts not established
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 114
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes QA/QC disclosure, mentioning SGS Minerals as the lab, QP sign-off by Dr. Thomas Mumford, and stated methods including standards, blanks, duplicates, fire assay, and ICP-AES.
Evidence · text
“Quality Assurance and Control Results from samples taken during the 2025 field season were analyzed at SGS Minerals in Burnaby, BC. The sampling program was undertaken under the direction of Dr. Thomas Mumford. ... Standards, blanks, and duplicate samples were taken at intervals and frequencies that meet or exceed industry best practices. ... Gold was assayed using a fire assay with atomic absorption spectrometry and gravimetric finish when required (+9 g/t gold). Analysis by four acid digestion with multi-element ICP-AES analysis was conducted on all samples with silver and base metal over-limits being re-analyzed by emission spectrometry. Dr. Thomas Mumford, P.Geo., non-independent President of the Company, a qualified person under National Instrument 43-101, has reviewed and approved the technical information contained in this news release on behalf of the Company.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The table footer explicitly states that 'True width of the intervals has not yet been established by drilling'.
Evidence · table
“*True width of the intervals has not yet been established by drilling”
Context: *True width of the intervals has not yet been established by drilling
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: The intercept of 1.00m at 265.0 g/t gold in hole SR25-483 is exceptionally high-grade, well above the deposit-type norm.
Evidence · table
“265.0”
Context: 1.00
Extracted facts
Stored fact records: 114. Some facts used in scoring do not have a stored record.
Drill Results (114)
SR25-381Scottie Gold Mine · goldGrade: 42.5Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 42.5
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 60 m
- To
- 64.4 m
- Intercept Depth
- 60 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:60-64.4
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 4.40m at 42.5 g/t gold represents an exceptional grade and a strong grade-thickness product, significantly exceeding the project's average grade.
Positive factors
- Exceptional gold grade
- Strong grade-thickness product
Negative factors
- Apparent width only
Evidence · table
“42.5”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-381Scottie Gold Mine · silverGrade: 6.36Grade Unit: g/tIntercept: 4.4 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.36
- Grade Unit
- g/t
- Intercept
- 4.4 m
- From
- 60 m
- To
- 64.4 m
- Intercept Depth
- 60 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:60-64.4
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Negative factors
- Apparent width only
Evidence · table
“6.36”
Context: 4.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-381Scottie Gold Mine · goldGrade: 101Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 101
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 60 m
- To
- 61 m
- Intercept Depth
- 60 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:60-61
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 1.00m at 101.0 g/t gold represents a bonanza grade, significantly enhancing the overall intercept quality.
Positive factors
- Bonanza gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“101.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-381Scottie Gold Mine · silverGrade: 15Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 15
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 60 m
- To
- 61 m
- Intercept Depth
- 60 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:60-61
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside bonanza gold grades.
Negative factors
- Apparent width only
Evidence · table
“15.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-381Scottie Gold Mine · goldGrade: 4.91Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.91
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 246.8 m
- To
- 259 m
- Intercept Depth
- 246.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:246.8-259
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 12.20m at 4.91 g/t gold represents a strong grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
- Moderate width
Negative factors
- Apparent width only
Evidence · table
“4.91”
Context: 12.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-381Scottie Gold Mine · silverGrade: 0.82Grade Unit: g/tIntercept: 12.2 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 12.2 m
- From
- 246.8 m
- To
- 259 m
- Intercept Depth
- 246.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:246.8-259
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“0.82”
Context: 12.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-381Scottie Gold Mine · goldGrade: 26.5Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 26.5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 246.8 m
- To
- 248.8 m
- Intercept Depth
- 246.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:246.8-248.8
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 2.00m at 26.5 g/t gold represents an exceptional grade, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“26.5”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-381Scottie Gold Mine · silverGrade: 5Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-381
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 246.8 m
- To
- 248.8 m
- Intercept Depth
- 246.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-381:246.8-248.8
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Negative factors
- Apparent width only
Evidence · table
“5.00”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 7.57Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.57
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 193.8 m
- To
- 204.8 m
- Intercept Depth
- 193.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:193.8-204.8
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 11.00m at 7.57 g/t gold represents a strong grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
- Moderate width
Negative factors
- Apparent width only
Evidence · table
“7.57”
Context: 11.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 50Grade Unit: g/tIntercept: 11 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 50
- Grade Unit
- g/t
- Intercept
- 11 m
- From
- 193.8 m
- To
- 204.8 m
- Intercept Depth
- 193.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:193.8-204.8
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 11.00m at 50.0 g/t silver represents a strong silver grade, adding value to the polymetallic mineralization.
Positive factors
- Strong silver grade
Negative factors
- Apparent width only
Evidence · table
“50.0”
Context: 11.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 29.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 29.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 194.8 m
- To
- 195.8 m
- Intercept Depth
- 194.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:194.8-195.8
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 1.00m at 29.8 g/t gold represents an exceptional grade, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“29.8”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 7Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 194.8 m
- To
- 195.8 m
- Intercept Depth
- 194.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:194.8-195.8
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Negative factors
- Apparent width only
Evidence · table
“7.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 58.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 58.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 212.8 m
- To
- 213.8 m
- Intercept Depth
- 212.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:212.8-213.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 58.4 g/t gold represents a bonanza grade, indicating very high-grade mineralization.
Positive factors
- Bonanza gold grade
Negative factors
- Apparent width only
Evidence · table
“58.4”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 18Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 18
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 212.8 m
- To
- 213.8 m
- Intercept Depth
- 212.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:212.8-213.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside bonanza gold grades.
Positive factors
- Moderate silver grade
Negative factors
- Apparent width only
Evidence · table
“18.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 5.39Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5.39
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 220.8 m
- To
- 222.8 m
- Intercept Depth
- 220.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:220.8-222.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 2.00m at 5.39 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“5.39”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 1.5Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 220.8 m
- To
- 222.8 m
- Intercept Depth
- 220.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:220.8-222.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“1.50”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 5.65Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5.65
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 232.8 m
- To
- 233.8 m
- Intercept Depth
- 232.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:232.8-233.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 5.65 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“5.65”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 232.8 m
- To
- 233.8 m
- Intercept Depth
- 232.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:232.8-233.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“3.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 1.46Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.46
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 238.8 m
- To
- 239.8 m
- Intercept Depth
- 238.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:238.8-239.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 1.46 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.46”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 2.64Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.64
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 246.8 m
- To
- 251.8 m
- Intercept Depth
- 246.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:246.8-251.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 5.00m at 2.64 g/t gold represents a moderate grade over a narrow width.
Negative factors
- Apparent width only
Evidence · table
“2.64”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 3.4Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 246.8 m
- To
- 251.8 m
- Intercept Depth
- 246.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:246.8-251.8
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“3.40”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 3.26Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.26
- Grade Unit
- g/t
- Intercept
- 1.8 m
- From
- 255.8 m
- To
- 257.6 m
- Intercept Depth
- 255.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:255.8-257.6
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.80m at 3.26 g/t gold represents a moderate grade.
Positive factors
- Moderate gold grade
Negative factors
- Apparent width only
Evidence · table
“3.26”
Context: 1.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 158Grade Unit: g/tIntercept: 1.8 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 158
- Grade Unit
- g/t
- Intercept
- 1.8 m
- From
- 255.8 m
- To
- 257.6 m
- Intercept Depth
- 255.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:255.8-257.6
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.80m at 158.0 g/t silver represents an exceptional silver grade, adding significant value to the polymetallic mineralization.
Positive factors
- Exceptional silver grade
Negative factors
- Apparent width only
Evidence · table
“158.0”
Context: 1.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 3.14Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.14
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 282.2 m
- To
- 284.2 m
- Intercept Depth
- 282.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:282.2-284.2
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 2.00m at 3.14 g/t gold represents a moderate grade.
Positive factors
- Moderate gold grade
Negative factors
- Apparent width only
Evidence · table
“3.14”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · goldGrade: 4.2Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.2
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 291 m
- To
- 297 m
- Intercept Depth
- 291 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-475:291-297
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 6.00m at 4.20 g/t gold represents a strong grade over a narrow width.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“4.20”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · goldGrade: 1.58Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.58
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 82 m
- To
- 84 m
- Intercept Depth
- 82 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:82-84
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 2.00m at 1.58 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.58”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · goldGrade: 21.2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 21.2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 113 m
- To
- 116 m
- Intercept Depth
- 113 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:113-116
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 3.00m at 21.2 g/t gold represents an exceptional grade and a strong grade-thickness product.
Positive factors
- Exceptional gold grade
- Strong grade-thickness product
Negative factors
- Apparent width only
Evidence · table
“21.2”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · goldGrade: 26.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 26.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 180.5 m
- To
- 181.5 m
- Intercept Depth
- 180.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:180.5-181.5
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 26.9 g/t gold represents an exceptional grade, indicating very high-grade mineralization.
Positive factors
- Exceptional gold grade
Negative factors
- Apparent width only
Evidence · table
“26.9”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · silverGrade: 4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 180.5 m
- To
- 181.5 m
- Intercept Depth
- 180.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:180.5-181.5
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“4.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · goldGrade: 1.23Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.23
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 231.9 m
- To
- 234 m
- Intercept Depth
- 231.9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:231.9-234
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 2.10m at 1.23 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.23”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · goldGrade: 24.9Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 24.9
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 240 m
- To
- 246 m
- Intercept Depth
- 240 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:240-246
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 6.00m at 24.9 g/t gold represents an exceptional grade and a strong grade-thickness product, significantly contributing to the overall mineralization.
Positive factors
- Exceptional gold grade
- Strong grade-thickness product
Negative factors
- Apparent width only
Evidence · table
“24.9”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · silverGrade: 2Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 240 m
- To
- 246 m
- Intercept Depth
- 240 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:240-246
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“2.00”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · goldGrade: 6.13Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.13
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 296 m
- To
- 300 m
- Intercept Depth
- 296 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:296-300
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 4.00m at 6.13 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“6.13”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-476Scottie Gold Mine · silverGrade: 0.75Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 296 m
- To
- 300 m
- Intercept Depth
- 296 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-476:296-300
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“0.75”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-477Scottie Gold Mine · goldGrade: 1.15Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-477
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 234 m
- To
- 236 m
- Intercept Depth
- 234 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-477:234-236
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 2.00m at 1.15 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.15”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-477Scottie Gold Mine · silverGrade: 3Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-477
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 234 m
- To
- 236 m
- Intercept Depth
- 234 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-477:234-236
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“3.00”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-479Scottie Gold Mine · goldGrade: 4.1Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.1
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 71 m
- To
- 84.5 m
- Intercept Depth
- 71 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-479:71-84.5
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 13.50m at 4.10 g/t gold represents a strong grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
- Moderate width
Negative factors
- Apparent width only
Evidence · table
“4.10”
Context: 13.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-479Scottie Gold Mine · silverGrade: 0.96Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0.96
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 71 m
- To
- 84.5 m
- Intercept Depth
- 71 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-479:71-84.5
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“0.96”
Context: 13.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-479Scottie Gold Mine · goldGrade: 7.47Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.47
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 79 m
- To
- 83.5 m
- Intercept Depth
- 79 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-479:79-83.5
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 4.50m at 7.47 g/t gold represents a strong grade, enhancing the overall intercept quality.
Positive factors
- Strong gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“7.47”
Context: 4.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-479Scottie Gold Mine · silverGrade: 2.89Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.89
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 79 m
- To
- 83.5 m
- Intercept Depth
- 79 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-479:79-83.5
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“2.89”
Context: 4.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-479Scottie Gold Mine · goldGrade: 6.36Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.36
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 110 m
- To
- 112 m
- Intercept Depth
- 110 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-479:110-112
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 2.00m at 6.36 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“6.36”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-479Scottie Gold Mine · goldGrade: 5.33Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5.33
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 165.5 m
- To
- 167.5 m
- Intercept Depth
- 165.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-479:165.5-167.5
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 2.00m at 5.33 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“5.33”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · goldGrade: 1.94Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.94
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 241.4 m
- To
- 242.4 m
- Intercept Depth
- 241.4 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:241.4-242.4
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 1.94 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.94”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · silverGrade: 3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 241.4 m
- To
- 242.4 m
- Intercept Depth
- 241.4 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:241.4-242.4
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“3.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · goldGrade: 2.23Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.23
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 256 m
- To
- 257 m
- Intercept Depth
- 256 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:256-257
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 2.23 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“2.23”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · silverGrade: 9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 256 m
- To
- 257 m
- Intercept Depth
- 256 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:256-257
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“9.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · goldGrade: 3.49Grade Unit: g/tIntercept: 8.05 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.49
- Grade Unit
- g/t
- Intercept
- 8.05 m
- From
- 263 m
- To
- 271.05 m
- Intercept Depth
- 263 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:263-271.05
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 8.05m at 3.49 g/t gold represents a moderate grade over a narrow width.
Positive factors
- Moderate gold grade
Negative factors
- Apparent width only
Evidence · table
“3.49”
Context: 8.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · silverGrade: 1.51Grade Unit: g/tIntercept: 8.05 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.51
- Grade Unit
- g/t
- Intercept
- 8.05 m
- From
- 263 m
- To
- 271.05 m
- Intercept Depth
- 263 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:263-271.05
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“1.51”
Context: 8.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · goldGrade: 7.16Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.16
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 294 m
- To
- 295.05 m
- Intercept Depth
- 294 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:294-295.05
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.05m at 7.16 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“7.16”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-480Scottie Gold Mine · silverGrade: 6Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-480
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 294 m
- To
- 295.05 m
- Intercept Depth
- 294 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-480:294-295.05
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“6.00”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · goldGrade: 1.57Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.57
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 9 m
- To
- 12 m
- Intercept Depth
- 9 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:9-12
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 3.00m at 1.57 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.57”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · goldGrade: 2.07Grade Unit: g/tIntercept: 17.95 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.07
- Grade Unit
- g/t
- Intercept
- 17.95 m
- From
- 90.05 m
- To
- 108 m
- Intercept Depth
- 90.05 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:90.05-108
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 17.95m at 2.07 g/t gold represents a moderate grade over a significant width.
Negative factors
- Apparent width only
Evidence · table
“2.07”
Context: 17.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · silverGrade: 1.1Grade Unit: g/tIntercept: 17.95 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 17.95 m
- From
- 90.05 m
- To
- 108 m
- Intercept Depth
- 90.05 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:90.05-108
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“1.10”
Context: 17.95
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · goldGrade: 8.49Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 8.49
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 90.05 m
- To
- 92.05 m
- Intercept Depth
- 90.05 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:90.05-92.05
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 2.00m at 8.49 g/t gold represents a strong grade, enhancing the overall intercept quality.
Positive factors
- Strong gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“8.49”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · silverGrade: 2.5Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 90.05 m
- To
- 92.05 m
- Intercept Depth
- 90.05 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:90.05-92.05
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“2.50”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · goldGrade: 1.48Grade Unit: g/tIntercept: 5.05 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 5.05 m
- From
- 223.25 m
- To
- 228.3 m
- Intercept Depth
- 223.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:223.25-228.3
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 5.05m at 1.48 g/t gold represents a moderate grade over a narrow width.
Negative factors
- Apparent width only
Evidence · table
“1.48”
Context: 5.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · silverGrade: 3.62Grade Unit: g/tIntercept: 5.05 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.62
- Grade Unit
- g/t
- Intercept
- 5.05 m
- From
- 223.25 m
- To
- 228.3 m
- Intercept Depth
- 223.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:223.25-228.3
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“3.62”
Context: 5.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · goldGrade: 2.38Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.38
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 245 m
- To
- 251 m
- Intercept Depth
- 245 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:245-251
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 6.00m at 2.38 g/t gold represents a moderate grade over a narrow width.
Negative factors
- Apparent width only
Evidence · table
“2.38”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · silverGrade: 6.33Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.33
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 245 m
- To
- 251 m
- Intercept Depth
- 245 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:245-251
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“6.33”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · goldGrade: 1.03Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.03
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 273.5 m
- To
- 279 m
- Intercept Depth
- 273.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:273.5-279
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 5.50m at 1.03 g/t gold represents a moderate grade over a narrow width.
Negative factors
- Apparent width only
Evidence · table
“1.03”
Context: 5.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · silverGrade: 2.18Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.18
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 273.5 m
- To
- 279 m
- Intercept Depth
- 273.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:273.5-279
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“2.18”
Context: 5.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · goldGrade: 2.32Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.32
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 283 m
- To
- 284 m
- Intercept Depth
- 283 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:283-284
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 2.32 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“2.32”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-481Scottie Gold Mine · silverGrade: 2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 283 m
- To
- 284 m
- Intercept Depth
- 283 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-481:283-284
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“2.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · goldGrade: 1.42Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.42
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 60.07 m
- To
- 60.37 m
- Intercept Depth
- 60.07 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:60.07-60.37
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 0.30m at 1.42 g/t gold represents a moderate grade over a very narrow width.
Negative factors
- Apparent width only
Evidence · table
“1.42”
Context: 0.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · silverGrade: 38Grade Unit: g/tIntercept: 0.3 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 38
- Grade Unit
- g/t
- Intercept
- 0.3 m
- From
- 60.07 m
- To
- 60.37 m
- Intercept Depth
- 60.07 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:60.07-60.37
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 0.30m at 38.0 g/t silver represents a strong silver grade over a very narrow width.
Positive factors
- Strong silver grade
Negative factors
- Apparent width only
Evidence · table
“38.0”
Context: 0.30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · goldGrade: 8.05Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 8.05
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 72 m
- To
- 80 m
- Intercept Depth
- 72 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:72-80
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 8.00m at 8.05 g/t gold represents a strong grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
- Moderate width
Negative factors
- Apparent width only
Evidence · table
“8.05”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · silverGrade: 4.82Grade Unit: g/tIntercept: 8 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.82
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 72 m
- To
- 80 m
- Intercept Depth
- 72 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:72-80
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“4.82”
Context: 8.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · goldGrade: 23.5Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 23.5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 74 m
- To
- 76 m
- Intercept Depth
- 74 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:74-76
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 2.00m at 23.5 g/t gold represents an exceptional grade, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“23.5”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · silverGrade: 9.5Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 9.5
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 74 m
- To
- 76 m
- Intercept Depth
- 74 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:74-76
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Negative factors
- Apparent width only
Evidence · table
“9.50”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · goldGrade: 7.57Grade Unit: g/tIntercept: 5.39 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.57
- Grade Unit
- g/t
- Intercept
- 5.39 m
- From
- 163.11 m
- To
- 168.5 m
- Intercept Depth
- 163.11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:163.11-168.5
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 5.39m at 7.57 g/t gold represents a strong grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
- Moderate width
Negative factors
- Apparent width only
Evidence · table
“7.57”
Context: 5.39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · silverGrade: 5.19Grade Unit: g/tIntercept: 5.39 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5.19
- Grade Unit
- g/t
- Intercept
- 5.39 m
- From
- 163.11 m
- To
- 168.5 m
- Intercept Depth
- 163.11 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:163.11-168.5
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“5.19”
Context: 5.39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · goldGrade: 11.5Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 11.5
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 164.5 m
- To
- 167.5 m
- Intercept Depth
- 164.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:164.5-167.5
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 3.00m at 11.5 g/t gold represents an exceptional grade, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“11.5”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-482Scottie Gold Mine · silverGrade: 6Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-482
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 164.5 m
- To
- 167.5 m
- Intercept Depth
- 164.5 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-482:164.5-167.5
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Negative factors
- Apparent width only
Evidence · table
“6.00”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 4.69Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.69
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 108.2 m
- To
- 109.25 m
- Intercept Depth
- 108.2 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:108.2-109.25
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.05m at 4.69 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“4.69”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 12.5Grade Unit: g/tIntercept: 5.55 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 12.5
- Grade Unit
- g/t
- Intercept
- 5.55 m
- From
- 134.8 m
- To
- 140.35 m
- Intercept Depth
- 134.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:134.8-140.35
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 5.55m at 12.5 g/t gold represents an exceptional grade and a strong grade-thickness product, significantly contributing to the overall mineralization.
Positive factors
- Exceptional gold grade
- Strong grade-thickness product
Negative factors
- Apparent width only
Evidence · table
“12.5”
Context: 5.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 6.82Grade Unit: g/tIntercept: 5.55 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.82
- Grade Unit
- g/t
- Intercept
- 5.55 m
- From
- 134.8 m
- To
- 140.35 m
- Intercept Depth
- 134.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:134.8-140.35
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“6.82”
Context: 5.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 23.7Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 23.7
- Grade Unit
- g/t
- Intercept
- 2.2 m
- From
- 134.8 m
- To
- 137 m
- Intercept Depth
- 134.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:134.8-137
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 2.20m at 23.7 g/t gold represents an exceptional grade, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“23.7”
Context: 2.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 25Grade Unit: g/tIntercept: 2.2 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 25
- Grade Unit
- g/t
- Intercept
- 2.2 m
- From
- 134.8 m
- To
- 137 m
- Intercept Depth
- 134.8 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:134.8-137
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Positive factors
- Moderate silver grade
Negative factors
- Apparent width only
Evidence · table
“25.0”
Context: 2.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 1.95Grade Unit: g/tIntercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.95
- Grade Unit
- g/t
- Intercept
- 3.15 m
- From
- 251 m
- To
- 254.15 m
- Intercept Depth
- 251 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:251-254.15
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 3.15m at 1.95 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.95”
Context: 3.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 5Grade Unit: g/tIntercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 3.15 m
- From
- 251 m
- To
- 254.15 m
- Intercept Depth
- 251 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:251-254.15
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“5.00”
Context: 3.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 14.4Grade Unit: g/tIntercept: 40.75 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 14.4
- Grade Unit
- g/t
- Intercept
- 40.75 m
- From
- 260.25 m
- To
- 301 m
- Intercept Depth
- 260.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:260.25-301
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 40.75m at 14.4 g/t gold represents an exceptional grade over a very broad width, yielding an exceptional grade-thickness product, making it a highly material result for the project.
Positive factors
- Exceptional gold grade
- Very broad intercept
- Exceptional grade-thickness product
Negative factors
- Apparent width only
Evidence · table
“14.4”
Context: 40.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 5.9Grade Unit: g/tIntercept: 40.75 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5.9
- Grade Unit
- g/t
- Intercept
- 40.75 m
- From
- 260.25 m
- To
- 301 m
- Intercept Depth
- 260.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:260.25-301
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside exceptional gold grades.
Negative factors
- Apparent width only
Evidence · table
“5.90”
Context: 40.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 11.2Grade Unit: g/tIntercept: 11.25 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 11.2
- Grade Unit
- g/t
- Intercept
- 11.25 m
- From
- 287.75 m
- To
- 299 m
- Intercept Depth
- 287.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:287.75-299
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 11.25m at 11.2 g/t gold represents an exceptional grade over a moderate width, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- Moderate width
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“11.2”
Context: 11.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 8.84Grade Unit: g/tIntercept: 11.25 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 8.84
- Grade Unit
- g/t
- Intercept
- 11.25 m
- From
- 287.75 m
- To
- 299 m
- Intercept Depth
- 287.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:287.75-299
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside exceptional gold grades.
Negative factors
- Apparent width only
Evidence · table
“8.84”
Context: 11.25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 39.7Grade Unit: g/tIntercept: 11.15 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 39.7
- Grade Unit
- g/t
- Intercept
- 11.15 m
- From
- 260.25 m
- To
- 271.4 m
- Intercept Depth
- 260.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:260.25-271.4
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 11.15m at 39.7 g/t gold represents a bonanza grade over a moderate width, yielding an exceptional grade-thickness product, significantly enhancing the overall intercept quality.
Positive factors
- Bonanza gold grade
- Moderate width
- Exceptional grade-thickness product
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“39.7”
Context: 11.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 39.7Grade Unit: g/tIntercept: 11.15 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 39.7
- Grade Unit
- g/t
- Intercept
- 11.15 m
- From
- 260.25 m
- To
- 271.4 m
- Intercept Depth
- 260.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:260.25-271.4
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is strong and contributes as a byproduct alongside bonanza gold grades.
Positive factors
- Strong silver grade
Negative factors
- Apparent width only
Evidence · table
“39.7”
Context: 11.15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 77.2Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 77.2
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 260.25 m
- To
- 265.25 m
- Intercept Depth
- 260.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:260.25-265.25
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 5.00m at 77.2 g/t gold represents a bonanza grade and a strong grade-thickness product, significantly enhancing the overall intercept quality.
Positive factors
- Bonanza gold grade
- Strong grade-thickness product
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“77.2”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 26.2Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 26.2
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 260.25 m
- To
- 265.25 m
- Intercept Depth
- 260.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:260.25-265.25
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside bonanza gold grades.
Positive factors
- Moderate silver grade
Negative factors
- Apparent width only
Evidence · table
“26.2”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 265Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 265
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 261.25 m
- To
- 262.25 m
- Intercept Depth
- 261.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:261.25-262.25
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 1.00m at 265.0 g/t gold represents a bonanza grade and an exceptional grade-thickness product, making it a highly material result for the project.
Positive factors
- Bonanza gold grade
- Exceptional grade-thickness product
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“265.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 80Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 80
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 261.25 m
- To
- 262.25 m
- Intercept Depth
- 261.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:261.25-262.25
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is strong and contributes as a byproduct alongside bonanza gold grades.
Positive factors
- Strong silver grade
Negative factors
- Apparent width only
Evidence · table
“80.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · goldGrade: 7.93Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.93
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 318.7 m
- To
- 319.7 m
- Intercept Depth
- 318.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:318.7-319.7
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 7.93 g/t gold represents a strong grade, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
Negative factors
- Apparent width only
Evidence · table
“7.93”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-483Scottie Gold Mine · silverGrade: 16Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 16
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 318.7 m
- To
- 319.7 m
- Intercept Depth
- 318.7 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-483:318.7-319.7
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“16.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · goldGrade: 6.71Grade Unit: g/tIntercept: 8.8 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.71
- Grade Unit
- g/t
- Intercept
- 8.8 m
- From
- 183.75 m
- To
- 192.55 m
- Intercept Depth
- 183.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:183.75-192.55
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 8.80m at 6.71 g/t gold represents a strong grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
- Moderate width
Negative factors
- Apparent width only
Evidence · table
“6.71”
Context: 8.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · silverGrade: 15.5Grade Unit: g/tIntercept: 8.8 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 15.5
- Grade Unit
- g/t
- Intercept
- 8.8 m
- From
- 183.75 m
- To
- 192.55 m
- Intercept Depth
- 183.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:183.75-192.55
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“15.5”
Context: 8.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · goldGrade: 30.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 30.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 183.75 m
- To
- 184.75 m
- Intercept Depth
- 183.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:183.75-184.75
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 1.00m at 30.8 g/t gold represents an exceptional grade, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“30.8”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · silverGrade: 10Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 10
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 183.75 m
- To
- 184.75 m
- Intercept Depth
- 183.75 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:183.75-184.75
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Negative factors
- Apparent width only
Evidence · table
“10.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · goldGrade: 4.93Grade Unit: g/tIntercept: 7.75 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.93
- Grade Unit
- g/t
- Intercept
- 7.75 m
- From
- 201.25 m
- To
- 209 m
- Intercept Depth
- 201.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:201.25-209
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 7.75m at 4.93 g/t gold represents a strong grade over a moderate width, contributing positively to the overall mineralization.
Positive factors
- Strong gold grade
- Moderate width
Negative factors
- Apparent width only
Evidence · table
“4.93”
Context: 7.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · silverGrade: 10.1Grade Unit: g/tIntercept: 7.75 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 10.1
- Grade Unit
- g/t
- Intercept
- 7.75 m
- From
- 201.25 m
- To
- 209 m
- Intercept Depth
- 201.25 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:201.25-209
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct.
Negative factors
- Apparent width only
Evidence · table
“10.1”
Context: 7.75
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · goldGrade: 29.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 29.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 208 m
- To
- 209 m
- Intercept Depth
- 208 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:208-209
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This sub-interval of 1.00m at 29.9 g/t gold represents an exceptional grade, significantly enhancing the overall intercept quality.
Positive factors
- Exceptional gold grade
- High-grade sub-interval
Negative factors
- Apparent width only
Evidence · table
“29.9”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-484Scottie Gold Mine · silverGrade: 16Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-484
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 16
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 208 m
- To
- 209 m
- Intercept Depth
- 208 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-484:208-209
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is moderate and contributes as a byproduct alongside high-grade gold.
Negative factors
- Apparent width only
Evidence · table
“16.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-485Scottie Gold Mine · goldGrade: 1.09Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-485
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.09
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 48 m
- To
- 49 m
- Intercept Depth
- 48 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-485:48-49
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 1.00m at 1.09 g/t gold represents a moderate grade.
Negative factors
- Apparent width only
Evidence · table
“1.09”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-485Scottie Gold Mine · goldGrade: 3.12Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- SR25-485
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.12
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 112.6 m
- To
- 119 m
- Intercept Depth
- 112.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-485:112.6-119
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This intercept of 6.40m at 3.12 g/t gold represents a moderate grade over a narrow width.
Positive factors
- Moderate gold grade
Negative factors
- Apparent width only
Evidence · table
“3.12”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-485Scottie Gold Mine · silverGrade: 1.25Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- SR25-485
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 112.6 m
- To
- 119 m
- Intercept Depth
- 112.6 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-485:112.6-119
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: This silver intercept is low grade and contributes as a minor byproduct.
Negative factors
- Apparent width only
Evidence · table
“1.25”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
SR25-475Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 238.8 m
- To
- 239.8 m
- Intercept Depth
- 238.8 m
Classification
- Sample Type
- drill
- Group ID
- SR25-475:238.8-239.8
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-475
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-475Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 282.2 m
- To
- 284.2 m
- Intercept Depth
- 282.2 m
Classification
- Sample Type
- drill
- Group ID
- SR25-475:282.2-284.2
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-475
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-475Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- SR25-475
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 291 m
- To
- 297 m
- Intercept Depth
- 291 m
Classification
- Sample Type
- drill
- Group ID
- SR25-475:291-297
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-475
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-476Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 82 m
- To
- 84 m
- Intercept Depth
- 82 m
Classification
- Sample Type
- drill
- Group ID
- SR25-476:82-84
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-476
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-476Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 113 m
- To
- 116 m
- Intercept Depth
- 113 m
Classification
- Sample Type
- drill
- Group ID
- SR25-476:113-116
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-476
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-476Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- SR25-476
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 231.9 m
- To
- 234 m
- Intercept Depth
- 231.9 m
Classification
- Sample Type
- drill
- Group ID
- SR25-476:231.9-234
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-476
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-479Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 110 m
- To
- 112 m
- Intercept Depth
- 110 m
Classification
- Sample Type
- drill
- Group ID
- SR25-479:110-112
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-479
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-479Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-479
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 165.5 m
- To
- 167.5 m
- Intercept Depth
- 165.5 m
Classification
- Sample Type
- drill
- Group ID
- SR25-479:165.5-167.5
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-479
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-481Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-481
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 9 m
- To
- 12 m
- Intercept Depth
- 9 m
Classification
- Sample Type
- drill
- Group ID
- SR25-481:9-12
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-481
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-483Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-483
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 108.2 m
- To
- 109.25 m
- Intercept Depth
- 108.2 m
Classification
- Sample Type
- drill
- Group ID
- SR25-483:108.2-109.25
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-483
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
SR25-485Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-485
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 48 m
- To
- 49 m
- Intercept Depth
- 48 m
Classification
- Sample Type
- drill
- Group ID
- SR25-485:48-49
QA/QC
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-25T00:00:00.000Z
Reasoning: Expanded from assay table. 0 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.00”
Context: SR25-485
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.