Scottie Resources Intercepts 6.41 g/t Gold over 14.0 m, Continuing to Demonstrate High-Grade in Fifi Veins at Blueberry Contact Zone
Original announcement by tmx on
- Company
- Scottie Resources Corp.
- Ticker
- SCOT
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Gold
- Secondary commodities
- Silver
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-14 23:05:35 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Scottie Resources has reported strong drill results from its 2025 program at the Blueberry Contact Zone within the Scottie Gold Mine Project in British Columbia. Highlights include 6.41 g/t gold over 14.0 metres in hole SR25-415, with sub-intervals reaching 44.8 g/t gold over 1.0 metre, and 20.50 g/t gold over 1.10 metres in hole SR25-371. This drilling aims to expand and upgrade the existing resource, supporting a recently released Preliminary Economic Assessment that outlines robust open pit and underground development potential.
Reasoning: The drill results from the Blueberry Contact Zone demonstrate high-grade gold mineralization, consistent with the project's orogenic gold deposit type and supporting the company's strategy to expand and upgrade its resource base, as highlighted by the strong PEA results. The headline intercept of 6.41 g/t Au over 14.0m, including bonanza grades, is highly material and novel, despite the lack of true width disclosure.
Positive factors
- High-grade gold intercepts, particularly in the Fifi vein zone, exceeding exceptional thresholds for orogenic gold deposits.
- Significant intercept length in SR25-415 (14.0m) with strong gold grades, indicating potential for bulk tonnage.
- Drilling is designed to expand existing resources and convert inferred to indicated categories, de-risking the project.
- The project has a recently completed PEA outlining robust economics with both open pit and underground potential.
- Comprehensive QA/QC disclosure, including certified lab and QP sign-off, enhances confidence in results.
Negative factors
- True width of the intervals has not been established, meaning reported widths are apparent and may overstate true thickness.
Facts used in scoring: 46
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release details QA/QC procedures including analysis by SGS Minerals, use of standards, blanks, and duplicates, and sign-off by a P.Geo.
Evidence · text
“Results from samples taken during the 2025 field season were analyzed at SGS Minerals in Burnaby, BC. The sampling program was undertaken under the direction of Dr. Thomas Mumford. The majority of drill core was NQ in diameter, with select holes of HQ size primarily taken for geomechanical purposes. Prior to sampling drill core was cut in half lengthwise, with half sent for assay and the remaining half kept in Stewart, BC. Standards, blanks, and duplicate samples were taken at intervals and frequencies that meet or exceed industry best practices. A secure chain of custody is maintained in transporting and storing all samples. Gold was assayed using a fire assay with atomic absorption spectrometry and gravimetric finish when required (+9 g/t gold). Analysis by four acid digestion with multi-element ICP-AES analysis was conducted on all samples with silver and base metal over-limits being re-analyzed by emission spectrometry. Dr. Thomas Mumford, P.Geo., non-independent President of the Company, a qualified person under National Instrument 43-101, has reviewed and approved the technical information contained in this news release on behalf of the Company.”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: Drilling in 2025 was designed to expand the existing resource while increasing geological confidence in the known zones, supporting the planned conversion of resources from the inferred to indicated category.
Evidence · text
“Drilling in 2025 was designed to expand the existing resource while increasing geological confidence in the known zones, supporting the planned conversion of resources from the inferred to indicated category.”
Extracted facts
Stored fact records: 46. Some facts used in scoring do not have a stored record.
Drill Results (46)
SR25-371Scottie Gold Mine · goldGrade: 20.5Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- SR25-371
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 20.5
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 162.55 m
- To
- 163.65 m
- Intercept Depth
- 162.55 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-371:162.55-163.65
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade, confirming the high-grade potential of the Fifi vein, which is material for resource expansion and confidence building, despite the narrow width and unestablished true width.
Positive factors
- Exceptional gold grade (20.5 g/t) for an orogenic deposit, exceeding the underground exceptional threshold.
- Supports the high-grade nature of the Fifi vein zone.
Negative factors
- Narrow intercept length (1.1m) limits overall contained metal.
- True width not established, potentially overstating thickness.
Evidence · table
“20.50”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 20.50 g/t is well above the exceptional threshold for orogenic gold deposits (15 g/t for underground, 5 g/t for open pit).
Evidence · table
“20.50”
Context: 1.10
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-371Scottie Gold Mine · silverGrade: 3Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- SR25-371
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 162.55 m
- To
- 163.65 m
- Intercept Depth
- 162.55 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-371:162.55-163.65
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a high-grade gold intercept.
Negative factors
- Low silver grade (3.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“3.00”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-371Scottie Gold Mine · goldGrade: 1.16Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-371
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.16
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 202.8 m
- To
- 203.85 m
- Intercept Depth
- 202.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-371:202.8-203.85
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a low gold grade, which is not particularly material, but contributes to understanding the mineralization within the Fifi zone.
Negative factors
- Low gold grade (1.16 g/t) is at the lower end of economic significance for an orogenic deposit.
- Narrow intercept length (1.05m).
- True width not established, potentially overstating thickness.
Evidence · table
“1.16”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-371Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-371
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 202.8 m
- To
- 203.85 m
- Intercept Depth
- 202.8 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-371:202.8-203.85
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: No silver grade was reported for this interval.
Negative factors
- No silver grade reported.
- True width not established, potentially overstating thickness.
Evidence · table
“0.00”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-371Scottie Gold Mine · goldGrade: 7.18Grade Unit: g/tIntercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- SR25-371
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.18
- Grade Unit
- g/t
- Intercept
- 1.35 m
- From
- 207.35 m
- To
- 208.7 m
- Intercept Depth
- 207.35 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-371:207.35-208.7
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade, contributing positively to the understanding of the Fifi vein's high-grade potential, despite its narrow width.
Positive factors
- Strong gold grade (7.18 g/t) for an orogenic deposit, exceeding the underground strong threshold and open pit exceptional threshold.
- Confirms high-grade mineralization in the Fifi vein zone.
Negative factors
- Narrow intercept length (1.35m).
- True width not established, potentially overstating thickness.
Evidence · table
“7.18”
Context: 1.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-371Scottie Gold Mine · silverGrade: 6Grade Unit: g/tIntercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- SR25-371
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6
- Grade Unit
- g/t
- Intercept
- 1.35 m
- From
- 207.35 m
- To
- 208.7 m
- Intercept Depth
- 207.35 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-371:207.35-208.7
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a strong gold intercept.
Negative factors
- Low silver grade (6.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“6.00”
Context: 1.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-379Scottie Gold Mine · goldGrade: 1.17Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-379
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.17
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 26 m
- To
- 29 m
- Intercept Depth
- 26 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-379:26-29
- Mining Method
- mixed
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a low gold grade, which is not particularly material, but contributes to understanding the mineralization in the Road sub-zone.
Negative factors
- Low gold grade (1.17 g/t) is at the lower end of economic significance for an orogenic deposit.
- True width not established, potentially overstating thickness.
Evidence · table
“1.17”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-379Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-379
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 26 m
- To
- 29 m
- Intercept Depth
- 26 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-379:26-29
- Mining Method
- mixed
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: No silver grade was reported for this interval.
Negative factors
- No silver grade reported.
- True width not established, potentially overstating thickness.
Evidence · table
“0.00”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-380Scottie Gold Mine · goldGrade: 2.2Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- SR25-380
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 82.65 m
- To
- 83.75 m
- Intercept Depth
- 82.65 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-380:82.65-83.75
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a low gold grade, which is not particularly material, but contributes to understanding the mineralization in the BB Vein sub-zone.
Negative factors
- Low gold grade (2.2 g/t) is below the weak threshold for underground orogenic deposits.
- Narrow intercept length (1.1m).
- True width not established, potentially overstating thickness.
Evidence · table
“2.20”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-380Scottie Gold Mine · silverGrade: 0Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- SR25-380
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 82.65 m
- To
- 83.75 m
- Intercept Depth
- 82.65 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-380:82.65-83.75
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: No silver grade was reported for this interval.
Negative factors
- No silver grade reported.
- True width not established, potentially overstating thickness.
Evidence · table
“0.00”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-380Scottie Gold Mine · goldGrade: 14.3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-380
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 14.3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 116.95 m
- To
- 117.95 m
- Intercept Depth
- 116.95 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-380:116.95-117.95
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a high gold grade, contributing positively to the understanding of the BB Vein's high-grade potential, despite its narrow width.
Positive factors
- High gold grade (14.3 g/t) for an orogenic deposit, approaching the underground exceptional threshold and well above open pit exceptional.
- Confirms high-grade mineralization in the BB Vein zone.
Negative factors
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“14.30”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-380Scottie Gold Mine · silverGrade: 6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-380
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 116.95 m
- To
- 117.95 m
- Intercept Depth
- 116.95 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-380:116.95-117.95
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a high-grade gold intercept.
Negative factors
- Low silver grade (6.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“6.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-382Scottie Gold Mine · goldGrade: 4.22Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- SR25-382
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.22
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 13.1 m
- To
- 15.5 m
- Intercept Depth
- 13.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-382:13.1-15.5
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade, contributing to the understanding of the Fifi vein's mineralization.
Positive factors
- Moderate gold grade (4.22 g/t) for an orogenic deposit, exceeding the open pit moderate threshold.
- Confirms mineralization in the Fifi vein zone.
Negative factors
- Narrow intercept length (2.4m).
- True width not established, potentially overstating thickness.
Evidence · table
“4.22”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-382Scottie Gold Mine · silverGrade: 1.25Grade Unit: g/tIntercept: 2.4 mView all detailsHide details
Identity
- Hole ID
- SR25-382
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.25
- Grade Unit
- g/t
- Intercept
- 2.4 m
- From
- 13.1 m
- To
- 15.5 m
- Intercept Depth
- 13.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-382:13.1-15.5
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a moderate gold intercept.
Negative factors
- Low silver grade (1.25 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“1.25”
Context: 2.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-382Scottie Gold Mine · goldGrade: 7.18Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-382
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.18
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 45 m
- To
- 46 m
- Intercept Depth
- 45 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-382:45-46
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade, contributing positively to the understanding of the Lemoffe sub-zone's high-grade potential, despite its narrow width.
Positive factors
- Strong gold grade (7.18 g/t) for an orogenic deposit, exceeding the underground strong threshold and open pit exceptional threshold.
- Confirms high-grade mineralization in the Lemoffe sub-zone.
Negative factors
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“7.18”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-382Scottie Gold Mine · silverGrade: 4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-382
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 45 m
- To
- 46 m
- Intercept Depth
- 45 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-382:45-46
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a strong gold intercept.
Negative factors
- Low silver grade (4.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“4.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-382Scottie Gold Mine · goldGrade: 1.72Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-382
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 76.75 m
- To
- 77.75 m
- Intercept Depth
- 76.75 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-382:76.75-77.75
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a low gold grade, which is not particularly material, but contributes to understanding the mineralization in the Lemoffe sub-zone.
Negative factors
- Low gold grade (1.72 g/t) is below the weak threshold for underground orogenic deposits.
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“1.72”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-382Scottie Gold Mine · silverGrade: 12Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-382
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 12
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 76.75 m
- To
- 77.75 m
- Intercept Depth
- 76.75 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-382:76.75-77.75
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a low gold intercept.
Negative factors
- Low silver grade (12.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“12.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-392Scottie Gold Mine · goldGrade: 10Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-392
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 10
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 129 m
- To
- 132 m
- Intercept Depth
- 129 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-392:129-132
- Mining Method
- mixed
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a moderate width, contributing positively to the understanding of the Road sub-zone's high-grade potential.
Positive factors
- Strong gold grade (10.0 g/t) for an orogenic deposit, exceeding the underground strong threshold and open pit exceptional threshold.
- Confirms high-grade mineralization in the Road sub-zone.
Negative factors
- True width not established, potentially overstating thickness.
Evidence · table
“10.0”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-392Scottie Gold Mine · silverGrade: 7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- SR25-392
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 129 m
- To
- 132 m
- Intercept Depth
- 129 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-392:129-132
- Mining Method
- mixed
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a strong gold intercept.
Negative factors
- Low silver grade (7.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“7.00”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · goldGrade: 1.96Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 1.96
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:90-91
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a low gold grade, which is not particularly material, but contributes to understanding the mineralization in the BB Vein sub-zone.
Negative factors
- Low gold grade (1.96 g/t) is below the weak threshold for underground orogenic deposits.
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“1.96”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · silverGrade: 4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 90 m
- To
- 91 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:90-91
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a low gold intercept.
Negative factors
- Low silver grade (4.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“4.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · goldGrade: 2.13Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.13
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 145.45 m
- To
- 147.55 m
- Intercept Depth
- 145.45 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:145.45-147.55
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a low gold grade, which is not particularly material, but contributes to understanding the mineralization in the Fifi vein zone.
Negative factors
- Low gold grade (2.13 g/t) is below the weak threshold for underground orogenic deposits.
- True width not established, potentially overstating thickness.
Evidence · table
“2.13”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · silverGrade: 3Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 145.45 m
- To
- 147.55 m
- Intercept Depth
- 145.45 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:145.45-147.55
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a low gold intercept.
Negative factors
- Low silver grade (3.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“3.00”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · goldGrade: 3.77Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.77
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 173 m
- To
- 174 m
- Intercept Depth
- 173 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:173-174
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade, contributing to the understanding of the Fifi vein's mineralization.
Positive factors
- Moderate gold grade (3.77 g/t) for an orogenic deposit, exceeding the open pit moderate threshold.
Negative factors
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“3.77”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · silverGrade: 85Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 85
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 173 m
- To
- 174 m
- Intercept Depth
- 173 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:173-174
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a moderate silver grade, contributing to the understanding of the Fifi vein's mineralization.
Positive factors
- Moderate silver grade (85.0 g/t) for an orogenic deposit, approaching the moderate threshold (100 g/t).
Negative factors
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“85.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · goldGrade: 3.18Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.18
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 219 m
- To
- 221 m
- Intercept Depth
- 219 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:219-221
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade, contributing to the understanding of the Lemoffe sub-zone's mineralization.
Positive factors
- Moderate gold grade (3.18 g/t) for an orogenic deposit, exceeding the open pit moderate threshold.
Negative factors
- True width not established, potentially overstating thickness.
Evidence · table
“3.18”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · silverGrade: 3Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 219 m
- To
- 221 m
- Intercept Depth
- 219 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:219-221
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a moderate gold intercept.
Negative factors
- Low silver grade (3.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“3.00”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · goldGrade: 3.97Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.97
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 231.65 m
- To
- 232.7 m
- Intercept Depth
- 231.65 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:231.65-232.7
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade, contributing to the understanding of the Lemoffe sub-zone's mineralization.
Positive factors
- Moderate gold grade (3.97 g/t) for an orogenic deposit, exceeding the open pit moderate threshold.
Negative factors
- Narrow intercept length (1.05m).
- True width not established, potentially overstating thickness.
Evidence · table
“3.97”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-411Scottie Gold Mine · silverGrade: 9Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- SR25-411
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 9
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 231.65 m
- To
- 232.7 m
- Intercept Depth
- 231.65 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-411:231.65-232.7
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a moderate gold intercept.
Negative factors
- Low silver grade (9.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“9.00”
Context: 1.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · goldGrade: 8.8Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 8.8
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 72.25 m
- To
- 73.35 m
- Intercept Depth
- 72.25 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:72.25-73.35
- Mining Method
- mixed
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade, contributing positively to the understanding of the Road sub-zone's high-grade potential, despite its narrow width.
Positive factors
- Strong gold grade (8.8 g/t) for an orogenic deposit, exceeding the underground strong threshold and open pit exceptional threshold.
- Confirms high-grade mineralization in the Road sub-zone.
Negative factors
- Narrow intercept length (1.1m).
- True width not established, potentially overstating thickness.
Evidence · table
“8.80”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · silverGrade: 2Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 72.25 m
- To
- 73.35 m
- Intercept Depth
- 72.25 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:72.25-73.35
- Mining Method
- mixed
Location
- Location
- Road
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a strong gold intercept.
Negative factors
- Low silver grade (2.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“2.00”
Context: 1.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · goldGrade: 4.74Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 4.74
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 133.65 m
- To
- 134.65 m
- Intercept Depth
- 133.65 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:133.65-134.65
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade, contributing to the understanding of the BB Vein's mineralization.
Positive factors
- Moderate gold grade (4.74 g/t) for an orogenic deposit, approaching the open pit exceptional threshold.
Negative factors
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“4.74”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · silverGrade: 5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 133.65 m
- To
- 134.65 m
- Intercept Depth
- 133.65 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:133.65-134.65
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a moderate gold intercept.
Negative factors
- Low silver grade (5.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“5.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · goldGrade: 3.5Grade Unit: g/tIntercept: 5.35 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 5.35 m
- From
- 199.1 m
- To
- 204.45 m
- Intercept Depth
- 199.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:199.1-204.45
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, contributing positively to the understanding of the BB Vein's mineralization.
Positive factors
- Moderate gold grade (3.5 g/t) for an orogenic deposit, exceeding the open pit moderate threshold.
- Moderate intercept length (5.35m) provides good contained metal.
Negative factors
- True width not established, potentially overstating thickness.
Evidence · table
“3.50”
Context: 5.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · silverGrade: 0.82Grade Unit: g/tIntercept: 5.35 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 0.82
- Grade Unit
- g/t
- Intercept
- 5.35 m
- From
- 199.1 m
- To
- 204.45 m
- Intercept Depth
- 199.1 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:199.1-204.45
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a moderate gold intercept.
Negative factors
- Very low silver grade (0.82 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“0.82”
Context: 5.35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · goldGrade: 6.35Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.35
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 202.35 m
- To
- 204.45 m
- Intercept Depth
- 202.35 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:202.35-204.45
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade, enhancing the overall prospectivity of the BB Vein zone.
Positive factors
- Strong gold grade (6.35 g/t) for an orogenic deposit, exceeding the open pit exceptional threshold.
- Higher grade sub-interval within a broader mineralized zone.
Negative factors
- True width not established, potentially overstating thickness.
Evidence · table
“6.35”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-413Scottie Gold Mine · silverGrade: 2.1Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- SR25-413
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 2.1
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 202.35 m
- To
- 204.45 m
- Intercept Depth
- 202.35 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-413:202.35-204.45
- Mining Method
- mixed
Location
- Location
- BB Vein
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a strong gold intercept.
Negative factors
- Low silver grade (2.1 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“2.10”
Context: 2.10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · goldGrade: 6.41Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 6.41
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 104 m
- To
- 118 m
- Intercept Depth
- 104 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:104-118
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This is a highly material intercept with strong gold grades over a significant width, indicating robust mineralization and contributing significantly to resource growth and confidence in the Fifi vein zone.
Positive factors
- Strong gold grade (6.41 g/t) over a significant width (14.0m), resulting in a strong GT product (89.74 g/t·m).
- Exceeds open pit exceptional threshold and approaches underground strong threshold for orogenic gold.
- Demonstrates continuity of high-grade mineralization in the Fifi vein zone, material for resource expansion.
Negative factors
- True width not established, potentially overstating thickness.
Evidence · table
“6.41”
Context: 14.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · silverGrade: 7.64Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.64
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 104 m
- To
- 118 m
- Intercept Depth
- 104 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:104-118
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a strong gold intercept.
Negative factors
- Low silver grade (7.64 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“7.64”
Context: 14.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · goldGrade: 19Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 19
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 107 m
- To
- 111 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:107-111
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This sub-interval shows exceptional gold grades over a moderate width, significantly enhancing the overall prospectivity and contained metal of the Fifi vein zone.
Positive factors
- Exceptional gold grade (19.0 g/t) for an orogenic deposit, exceeding the underground exceptional threshold.
- Strong GT product (76 g/t·m) over a moderate width (4.0m).
- Represents a high-grade core within a broader mineralized zone.
Negative factors
- True width not established, potentially overstating thickness.
Evidence · table
“19.0”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 19.0 g/t is well above the exceptional threshold for orogenic gold deposits (15 g/t for underground, 5 g/t for open pit).
Evidence · table
“19.0”
Context: 4.00
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · silverGrade: 16.3Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 16.3
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 107 m
- To
- 111 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:107-111
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside an exceptional gold intercept.
Negative factors
- Low silver grade (16.3 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“16.3”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · goldGrade: 44.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 44.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 109 m
- To
- 110 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:109-110
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This sub-interval shows bonanza gold grades, confirming the presence of very high-grade mineralization within the Fifi vein, which is highly material for resource potential.
Positive factors
- Exceptional gold grade (44.8 g/t) for an orogenic deposit, significantly exceeding the underground exceptional threshold.
- Represents a bonanza-grade core within the Fifi vein zone.
Negative factors
- Narrow intercept length (1.0m) limits overall contained metal.
- True width not established, potentially overstating thickness.
Evidence · table
“44.8”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Bonanza InterceptRejected · positive
Exceptionally high-grade zone, well above the deposit-type norm.
Reason: The gold grade of 44.8 g/t is significantly above the exceptional threshold for orogenic gold deposits (15 g/t for underground, 5 g/t for open pit).
Evidence · table
“44.8”
Context: 1.00
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · silverGrade: 25Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 109 m
- To
- 110 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:109-110
- Mining Method
- mixed
Location
- Location
- Fifi
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is low and not material, but is reported alongside a bonanza gold intercept.
Negative factors
- Low silver grade (25.0 g/t) is below the weak threshold for orogenic silver deposits (30 g/t).
- True width not established, potentially overstating thickness.
Evidence · table
“25.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · goldGrade: 7.72Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 7.72
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 205 m
- To
- 206 m
- Intercept Depth
- 205 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:205-206
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade, contributing positively to the understanding of the Lemoffe sub-zone's high-grade potential, despite its narrow width.
Positive factors
- Strong gold grade (7.72 g/t) for an orogenic deposit, exceeding the underground strong threshold and open pit exceptional threshold.
- Confirms high-grade mineralization in the Lemoffe sub-zone.
Negative factors
- Narrow intercept length (1.0m).
- True width not established, potentially overstating thickness.
Evidence · table
“7.72”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
SR25-415Scottie Gold Mine · silverGrade: 13Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- SR25-415
- Project
- Scottie Gold Mine
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- SCOT
Geometry
- Grade
- 13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 205 m
- To
- 206 m
- Intercept Depth
- 205 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- SR25-415:205-206
- Mining Method
- mixed
Location
- Location
- Lemoffe
- Loc. Source
- document
QA/QC
- Laboratory
- SGS Minerals
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-06T00:00:00.000Z
Reasoning: The silver grade is very low and not material, but is reported alongside a strong gold intercept.
Negative factors
- Low silver grade (13.0 g/t) is not material.
- True width not established, potentially overstating thickness.
Evidence · table
“13.0”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Apparent Width OnlyRejected · negative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Reason: The document explicitly states '*True width of the intervals has not yet been established by drilling'.
Evidence · text
“*True width of the intervals has not yet been established by drilling”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.