# Selkirk Copper Reports Additional Results from the Phase 2 Drill Program Including High-Grade Mineralization at Minto North and Area 118 Canonical Atlas analysis: https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52 Original source: https://money.tmx.com/en/quote/SCMI/news/5918866426995825/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi Publisher: tmx Original announcement: 2026-08-20T11:00:00.000Z Analysis by Minestarters Atlas Atlas analysis published: Unknown date Atlas analysis updated: Unknown date - Company: Selkirk Copper - Ticker: SCMI - Exchange: TSX - Region: Yukon, Canada - Primary commodity: Copper - Secondary commodities: Gold, Silver - Document categories: Drill results, Resource update - Extracted: 2026-09-14 22:29:42 UTC Narrative sentiment: 0.70 · Bullish ## Minestarters Atlas summary Selkirk Copper announced additional high-grade drill results from its Phase 2 program at the Minto Project in Yukon, Canada, including bonanza grades at Minto North and significant intercepts at Area 118. The company also provided an updated Mineral Resource Estimate, detailing substantial Measured and Indicated resources for copper, gold, and silver. These results support the ongoing Preliminary Economic Assessment for a potential restart of the Minto copper-gold-silver mine. Reasoning: Selkirk Copper reported strong drill results with high-grade intercepts, particularly at Minto North and Area 118, demonstrating expansion potential. The updated resource estimate provides a solid foundation for the planned mine restart, although some areas showed lower-than-expected grades and a portion of the resource remains in the inferred category. - Positive factor: High-grade copper-gold-silver intercepts reported from Minto North and Area 118, including bonanza grades. - Positive factor: Step-out drilling at Minto North and Area 118 indicates potential for expansion of mineralization. - Positive factor: Resource update shows significant Measured and Indicated resources for copper, gold, and silver. - Positive factor: Comprehensive QA/QC procedures are disclosed, including certified lab and QP sign-off. - Positive factor: The company is advancing a PEA for a planned restart of the Minto mine, indicating progress towards production. - Negative factor: Assay grades at Copper Keel were somewhat lower than expected, indicating limited potential for additional resource expansion in that area. - Negative factor: The resource update includes a significant portion of Inferred resources, which carry lower geological confidence. Facts used in scoring: 93 ## Classification and evidence **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: Hole 26SCM190 intersected 6.01% Cu over 1.93 m, which is an exceptionally high-grade copper intercept for a porphyry deposit. Evidence · text > 6.01% Cu, 8.77g/t Au, and 36.6 g/t Ag \(13.12% CuEq\) over 1.93 m **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: Hole 26SCM188 intersected 3.39% Cu over 6.0 m, which is an exceptionally high-grade copper intercept for a porphyry deposit. Evidence · table > 3.39 Context: 6.0 **Bonanza Intercept** Polarity: positive Definition: Exceptionally high-grade zone, well above the deposit-type norm. Why it applies: Hole 26SCM205 intersected 3.43% Cu over 3.7 m, which is an exceptionally high-grade copper intercept for a porphyry deposit. Evidence · table > 3.43 Context: 3.7 **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: Hole 26SCM205 intersected new mineralization beyond a previously interpreted fault, indicating potential for further expansion southwards. Evidence · text > Step-out drilling at Minto North intersected new mineralization beyond a previously interpreted fault, which is reinterpreted indicating potential for further expansion of mineralization southwards into an untested area **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: Hole 26SCM188 intersected significant mineralization in a step-out 50m beyond the limits of previous drilling in this area. Evidence · text > One drill hole reported here, 26SCM188, intersected significant mineralization in a step-out 50m beyond the limits of previous drilling in this area. **Step-Out Extension** Polarity: positive Definition: Mineralization extended beyond the previously known limit. Why it applies: Hole 26SCM179 was designed to test the western extents of known mineralization at the 117 Lens, with a step-out of 30 metres beyond previous drilling in this location. Evidence · text > Drill hole 26SCM179 was designed to test the western extents of known mineralization at the 117 Lens, with a step-out of 30 metres beyond previous drilling in this location. **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: The release details QA/QC procedures including certified reference material, coarse blank materials, field duplicate analysis, and standard laboratory procedures. Evidence · text > QAQC procedures include the insertion of certified reference material, coarse blank materials, and field duplicate analysis, as well as standard laboratory procedures to monitor contamination during preparation, analytical accuracy, and precision. **True Width Disclosed** Polarity: positive Definition: Actual thickness perpendicular to structure is stated, not just downhole length. Why it applies: True widths are estimated to be approximately 90% of core lengths based on the sub-horizontal to shallow-dipping nature of the modelled mineralized zones. Evidence · text > Primary intervals are reported as drill core length, with true widths estimated to be approximately 90% of core lengths, based on the sub-horizontal to shallow-dipping nature of the modelled mineralized zones. **Metal Equivalent Opaque** Polarity: negative Definition: Metal equivalent grade reported without disclosing the price, recovery, or payability assumptions used. Requires an actual metal equivalent grade; a combined elemental basket such as PGE is not a metal equivalent. Why it applies: The CuEq calculation is provided with commodity prices and recoveries, but the specific formula for CuEq is complex and includes variable recoveries based on grade, which can make direct comparison difficult. Evidence · table > CuEq Calculation: CuEq = \(\(Cu% × CuP × RCu × 2204.62\)+\(Au g/t ÷ 31.1035 × AuP × RAu\) + \(Ag g/t ÷ 31.1035 × AgP × RAg \)\)/\(CuP × RCu × 2204.62\) Where: CuP/AuP/AgP = USD$ commodity prices of $4.60/lb Cu, $3,300/oz Au, $40/oz Ag; RCu = Cu Recovery = 90%; RAu = Au Recovery = 80%; RAg= Ag Recovery = 80% Recoveries as estimated from historical mineral processing results. **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: Several holes, including 26SCM190, were designed to infill the center of the 202 Lens, and other holes at Copper Keel and Area 118 were for infill purposes. Evidence · text > Drill hole 26SCM190 was designed to infill the centre of the 202 Lens **Indicated Resource** Polarity: positive Definition: Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves. Why it applies: The resource estimate includes significant tonnages in the Indicated category for both open pit and underground mining methods. Evidence · table > Indicated Context: 21,779 **Measured Resource** Polarity: positive Definition: Highest confidence category — tonnage, grade, shape well-established from closely-spaced drilling. Basis for Proven Reserves. Why it applies: The resource estimate includes a Measured category for underground mining, which is the highest confidence category. Evidence · table > Measured Context: 348 **QP/CP Signed** Polarity: positive Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Why it applies: The MRE has been completed by Sue Bird of Moose Mountain Technical Services \(MMTS\), and technical aspects of the news release were reviewed and approved by Leif Bailey, P.Geo. Evidence · text > The MRE has been completed by Sue Bird of Moose Mountain Technical Services \(MMTS\). **NI 43-101 Compliant** Polarity: positive Definition: Resource estimate prepared in compliance with NI 43-101 \(Canada\) — high reporting standard. Why it applies: Resources are reported using the 2014 CIM Definition Standards and were estimated using the 2019 CIM Best Practices Guidelines, which are the basis for NI 43-101 compliance. Evidence · text > Resources are reported using the 2014 CIM Definition Standards and were estimated using the 2019 CIM Best Practices Guidelines. **Cut-off Disclosed** Polarity: positive Definition: Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison. Why it applies: Cut-off grades for both open pit \($30 CDN\) and underground \($80 CDN\) resources are clearly stated. Evidence · table > $30 Context: OP **Inferred Resource** Polarity: negative Definition: Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone. Why it applies: The resource estimate includes significant tonnages in the Inferred category for both open pit and underground mining methods, which is a speculative category. Evidence · table > Inferred Context: 7,052 **Resource Update** Polarity: neutral Definition: Revised estimate for an existing resource — compare to prior to assess progress. Why it applies: The document presents an updated Mineral Resource Estimate for the Minto Project. Evidence · text > The following table summarizes the current Minto Mineral Resource Estimate: **PEA-Supporting** Polarity: neutral Definition: Resource estimate prepared to support a Preliminary Economic Assessment — early-stage study. Why it applies: The resource estimate and ongoing drill program are intended to inform a Preliminary Economic Assessment \(PEA\). Evidence · text > A key focus of this work is to fully consider the significant increase in the Mineral Resource Estimate \(see July 30, 2026 News Release\) into the overall plans which has led to additional planning and development work. The Company is committed to completing the PEA in Q3 2026 ## Extracted facts Stored fact records: 93. Some facts used in scoring do not have a stored record. ## Drill Results (90) ### 26SCM179 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-0) Minto North · copper #### Identity - Hole ID: 26SCM179 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.98 - Grade Unit: % - Intercept: 12.7 m - From: 315.2 m - To: 327.9 m - Hole Depth: 340 m - Intercept Depth: 315.2 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM179:315.2-327.9 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 250.9 ° - Dip: -77.1 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The intercept in hole 26SCM179 shows a good copper grade over a moderate width, extending the known mineralization at the 117 Lens to the west, which is a positive for resource expansion. - Positive factor: Good copper grade for a porphyry deposit. - Positive factor: Intercept extends mineralization 30m to the west, indicating expansion potential. - Positive factor: True width estimated at 90% of core length, providing better geological understanding. Evidence · table > 0.98 Context: 12.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM179 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-1) Minto North · gold #### Identity - Hole ID: 26SCM179 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.39 - Grade Unit: g/t - Intercept: 12.7 m - From: 315.2 m - To: 327.9 m - Hole Depth: 340 m - Intercept Depth: 315.2 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM179:315.2-327.9 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 250.9 ° - Dip: -77.1 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate but contributes to the overall value of the intercept, supporting the expansion potential of the 117 Lens. - Positive factor: Gold is a valuable byproduct. - Positive factor: Intercept extends mineralization 30m to the west, indicating expansion potential. - Positive factor: True width estimated at 90% of core length, providing better geological understanding. Evidence · table > 0.39 Context: 12.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM179 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-2) Minto North · silver #### Identity - Hole ID: 26SCM179 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.4 - Grade Unit: g/t - Intercept: 12.7 m - From: 315.2 m - To: 327.9 m - Hole Depth: 340 m - Intercept Depth: 315.2 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM179:315.2-327.9 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 250.9 ° - Dip: -77.1 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but adds to the overall metal content of the intercept, supporting the expansion potential of the 117 Lens. - Positive factor: Silver is a valuable byproduct. - Positive factor: Intercept extends mineralization 30m to the west, indicating expansion potential. - Positive factor: True width estimated at 90% of core length, providing better geological understanding. Evidence · table > 3.4 Context: 12.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM182 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-3) Minto North · copper #### Identity - Hole ID: 26SCM182 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.51 - Grade Unit: % - Intercept: 11 m - From: 90 m - To: 101 m - Hole Depth: 225 m - Intercept Depth: 90 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM182:90-101 #### Location - Location: Copper Keel - Easting: 385849 - Northing: 6943626 - CRS: NAD 83 UTM Zone 8N - Azimuth: 313 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.57 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM182 confirms geological continuity but with a grade that is lower than expected, contributing to limited resource expansion potential in Copper Keel. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.51 Context: 11.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM182 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-4) Minto North · gold #### Identity - Hole ID: 26SCM182 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.13 - Grade Unit: g/t - Intercept: 11 m - From: 90 m - To: 101 m - Hole Depth: 225 m - Intercept Depth: 90 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM182:90-101 #### Location - Location: Copper Keel - Easting: 385849 - Northing: 6943626 - CRS: NAD 83 UTM Zone 8N - Azimuth: 313 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.57 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.13 Context: 11.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM182 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-5) Minto North · silver #### Identity - Hole ID: 26SCM182 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.9 - Grade Unit: g/t - Intercept: 11 m - From: 90 m - To: 101 m - Hole Depth: 225 m - Intercept Depth: 90 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM182:90-101 #### Location - Location: Copper Keel - Easting: 385849 - Northing: 6943626 - CRS: NAD 83 UTM Zone 8N - Azimuth: 313 ° - Dip: -73 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.57 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is very low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.9 Context: 11.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM184 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-6) Minto North · copper #### Identity - Hole ID: 26SCM184 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.87 - Grade Unit: % - Intercept: 29.8 m - From: 307 m - To: 336.8 m - Hole Depth: 354 m - Intercept Depth: 307 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM184:307-336.8 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 182 ° - Dip: -87.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.05 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM184 is a good infill result, confirming the continuity of mineralization at Minto Main with a solid grade and width. - Positive factor: Good copper grade over a significant width. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.87 Context: 29.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM184 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-7) Minto North · gold #### Identity - Hole ID: 26SCM184 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.28 - Grade Unit: g/t - Intercept: 29.8 m - From: 307 m - To: 336.8 m - Hole Depth: 354 m - Intercept Depth: 307 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM184:307-336.8 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 182 ° - Dip: -87.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.05 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill intercept at Minto Main. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.28 Context: 29.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM184 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-8) Minto North · silver #### Identity - Hole ID: 26SCM184 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.9 - Grade Unit: g/t - Intercept: 29.8 m - From: 307 m - To: 336.8 m - Hole Depth: 354 m - Intercept Depth: 307 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM184:307-336.8 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 182 ° - Dip: -87.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.05 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill intercept at Minto Main. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 2.9 Context: 29.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM185 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-9) Minto North · copper #### Identity - Hole ID: 26SCM185 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.52 - Grade Unit: % - Intercept: 9.6 m - From: 91.4 m - To: 101 m - Hole Depth: 216 m - Intercept Depth: 91.4 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM185:91.4-101 #### Location - Location: Copper Keel - Easting: 385850 - Northing: 6943626 - CRS: NAD 83 UTM Zone 8N - Azimuth: 326 ° - Dip: -83 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.59 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM185 confirms geological continuity but with a grade that is lower than expected, contributing to limited resource expansion potential in Copper Keel. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.52 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM185 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-10) Minto North · gold #### Identity - Hole ID: 26SCM185 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.13 - Grade Unit: g/t - Intercept: 9.6 m - From: 91.4 m - To: 101 m - Hole Depth: 216 m - Intercept Depth: 91.4 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM185:91.4-101 #### Location - Location: Copper Keel - Easting: 385850 - Northing: 6943626 - CRS: NAD 83 UTM Zone 8N - Azimuth: 326 ° - Dip: -83 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.59 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.13 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM185 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-11) Minto North · silver #### Identity - Hole ID: 26SCM185 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1 - Grade Unit: g/t - Intercept: 9.6 m - From: 91.4 m - To: 101 m - Hole Depth: 216 m - Intercept Depth: 91.4 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM185:91.4-101 #### Location - Location: Copper Keel - Easting: 385850 - Northing: 6943626 - CRS: NAD 83 UTM Zone 8N - Azimuth: 326 ° - Dip: -83 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.59 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is very low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 1.0 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM187 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-12) Minto North · copper #### Identity - Hole ID: 26SCM187 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.33 - Grade Unit: % - Intercept: 8 m - From: 193 m - To: 201 m - Hole Depth: 245 m - Intercept Depth: 193 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM187:193-201 #### Location - Location: Copper Keel - Easting: 385850 - Northing: 6943624 - CRS: NAD 83 UTM Zone 8N - Azimuth: 263 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.67 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM187 shows a good grade over a moderate width, confirming the geological model at Copper Keel. - Positive factor: Good copper grade for an infill hole. - Positive factor: Confirms continuity of the geological model. Evidence · table > 1.33 Context: 8.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM187 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-13) Minto North · gold #### Identity - Hole ID: 26SCM187 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.52 - Grade Unit: g/t - Intercept: 8 m - From: 193 m - To: 201 m - Hole Depth: 245 m - Intercept Depth: 193 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM187:193-201 #### Location - Location: Copper Keel - Easting: 385850 - Northing: 6943624 - CRS: NAD 83 UTM Zone 8N - Azimuth: 263 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.67 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill intercept at Copper Keel. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. Evidence · table > 0.52 Context: 8.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM187 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-14) Minto North · silver #### Identity - Hole ID: 26SCM187 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.7 - Grade Unit: g/t - Intercept: 8 m - From: 193 m - To: 201 m - Hole Depth: 245 m - Intercept Depth: 193 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM187:193-201 #### Location - Location: Copper Keel - Easting: 385850 - Northing: 6943624 - CRS: NAD 83 UTM Zone 8N - Azimuth: 263 ° - Dip: -70 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.67 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill intercept at Copper Keel. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. Evidence · table > 3.7 Context: 8.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM188 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-15) Minto North · copper #### Identity - Hole ID: 26SCM188 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.47 - Grade Unit: % - Intercept: 23 m - From: 301 m - To: 324 m - Hole Depth: 357 m - Intercept Depth: 301 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM188:301-324 #### Location - Location: Area 118 - Easting: 384853 - Northing: 6944153 - CRS: NAD 83 UTM Zone 8N - Azimuth: 185 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.66 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Hole 26SCM188 delivered a strong copper intercept over a substantial width, exceeding expectations and extending mineralization at Area 118, indicating significant exploration potential. - Positive factor: High-grade copper intercept over a significant width. - Positive factor: Step-out drilling extends mineralization 50m beyond previous limits. - Positive factor: Thickness and grade are better than expected. - Positive factor: Mineralization remains open to the southwest. Evidence · table > 1.47 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM188 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-16) Minto North · gold #### Identity - Hole ID: 26SCM188 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.33 - Grade Unit: g/t - Intercept: 23 m - From: 301 m - To: 324 m - Hole Depth: 357 m - Intercept Depth: 301 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM188:301-324 #### Location - Location: Area 118 - Easting: 384853 - Northing: 6944153 - CRS: NAD 83 UTM Zone 8N - Azimuth: 185 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.66 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade contributes significantly to the overall high-grade intercept in hole 26SCM188, supporting the expansion potential at Area 118. - Positive factor: Gold is a valuable byproduct. - Positive factor: Step-out drilling extends mineralization 50m beyond previous limits. - Positive factor: Thickness and grade are better than expected. - Positive factor: Mineralization remains open to the southwest. Evidence · table > 0.33 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM188 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-17) Minto North · silver #### Identity - Hole ID: 26SCM188 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 6.4 - Grade Unit: g/t - Intercept: 23 m - From: 301 m - To: 324 m - Hole Depth: 357 m - Intercept Depth: 301 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM188:301-324 #### Location - Location: Area 118 - Easting: 384853 - Northing: 6944153 - CRS: NAD 83 UTM Zone 8N - Azimuth: 185 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.66 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade adds to the overall metal content of the high-grade intercept in hole 26SCM188, supporting the expansion potential at Area 118. - Positive factor: Silver is a valuable byproduct. - Positive factor: Step-out drilling extends mineralization 50m beyond previous limits. - Positive factor: Thickness and grade are better than expected. - Positive factor: Mineralization remains open to the southwest. Evidence · table > 6.4 Context: 23.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM188 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-18) Minto North · copper #### Identity - Hole ID: 26SCM188 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.39 - Grade Unit: % - Intercept: 6 m - From: 318 m - To: 324 m - Hole Depth: 357 m - Intercept Depth: 301 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM188:318-324 #### Location - Location: Area 118 - Easting: 384853 - Northing: 6944153 - CRS: NAD 83 UTM Zone 8N - Azimuth: 185 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.73 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM188 shows bonanza-grade copper over a good width, significantly enhancing the overall intercept and indicating strong expansion potential at Area 118. - Positive factor: Bonanza grade copper intercept. - Positive factor: Part of a significant step-out, indicating strong expansion potential. - Positive factor: Thickness and grade are better than expected. - Positive factor: Mineralization remains open to the southwest. Evidence · table > 3.39 Context: 6.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM188 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-19) Minto North · gold #### Identity - Hole ID: 26SCM188 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.61 - Grade Unit: g/t - Intercept: 6 m - From: 318 m - To: 324 m - Hole Depth: 357 m - Intercept Depth: 301 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM188:318-324 #### Location - Location: Area 118 - Easting: 384853 - Northing: 6944153 - CRS: NAD 83 UTM Zone 8N - Azimuth: 185 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.73 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM188 shows a strong gold grade, contributing significantly to the overall high-grade intercept and indicating strong expansion potential at Area 118. - Positive factor: High-grade gold intercept. - Positive factor: Part of a significant step-out, indicating strong expansion potential. - Positive factor: Thickness and grade are better than expected. - Positive factor: Mineralization remains open to the southwest. Evidence · table > 0.61 Context: 6.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM188 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-20) Minto North · silver #### Identity - Hole ID: 26SCM188 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 16.5 - Grade Unit: g/t - Intercept: 6 m - From: 318 m - To: 324 m - Hole Depth: 357 m - Intercept Depth: 301 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM188:318-324 #### Location - Location: Area 118 - Easting: 384853 - Northing: 6944153 - CRS: NAD 83 UTM Zone 8N - Azimuth: 185 ° - Dip: -85 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.73 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade contributes to the overall high-grade intercept in hole 26SCM188, supporting the expansion potential at Area 118. - Positive factor: Good silver grade. - Positive factor: Part of a significant step-out, indicating strong expansion potential. - Positive factor: Thickness and grade are better than expected. - Positive factor: Mineralization remains open to the southwest. Evidence · table > 16.5 Context: 6.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM189 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-21) Minto North · copper #### Identity - Hole ID: 26SCM189 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.7 - Grade Unit: % - Intercept: 16.6 m - From: 282.3 m - To: 298.9 m - Hole Depth: 399 m - Intercept Depth: 282.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM189:282.3-298.9 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 102.5 ° - Dip: -69 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.86 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM189 is a good infill result, confirming the continuity of mineralization at Minto Main. - Positive factor: Good copper grade over a moderate width. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.70 Context: 16.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM189 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-22) Minto North · gold #### Identity - Hole ID: 26SCM189 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.26 - Grade Unit: g/t - Intercept: 16.6 m - From: 282.3 m - To: 298.9 m - Hole Depth: 399 m - Intercept Depth: 282.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM189:282.3-298.9 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 102.5 ° - Dip: -69 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.86 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill intercept at Minto Main. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.26 Context: 16.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM189 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-23) Minto North · silver #### Identity - Hole ID: 26SCM189 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.2 - Grade Unit: g/t - Intercept: 16.6 m - From: 282.3 m - To: 298.9 m - Hole Depth: 399 m - Intercept Depth: 282.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM189:282.3-298.9 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 102.5 ° - Dip: -69 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.86 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill intercept at Minto Main. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 2.2 Context: 16.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM189 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-24) Minto North · copper #### Identity - Hole ID: 26SCM189 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.99 - Grade Unit: % - Intercept: 7.7 m - From: 282.3 m - To: 290 m - Hole Depth: 399 m - Intercept Depth: 282.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM189:282.3-290 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 102.5 ° - Dip: -69 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.21 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM189 shows a good copper grade, enhancing the overall infill intercept at Minto Main. - Positive factor: Good copper grade over a moderate width. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.99 Context: 7.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM189 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-25) Minto North · gold #### Identity - Hole ID: 26SCM189 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.36 - Grade Unit: g/t - Intercept: 7.7 m - From: 282.3 m - To: 290 m - Hole Depth: 399 m - Intercept Depth: 282.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM189:282.3-290 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 102.5 ° - Dip: -69 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.21 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill sub-interval at Minto Main. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.36 Context: 7.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM189 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-26) Minto North · silver #### Identity - Hole ID: 26SCM189 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.7 - Grade Unit: g/t - Intercept: 7.7 m - From: 282.3 m - To: 290 m - Hole Depth: 399 m - Intercept Depth: 282.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM189:282.3-290 #### Location - Location: Minto Main - Easting: 384724 - Northing: 6944714 - CRS: NAD 83 UTM Zone 8N - Azimuth: 102.5 ° - Dip: -69 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.21 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill sub-interval at Minto Main. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 2.7 Context: 7.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM190 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-27) Minto North · copper #### Identity - Hole ID: 26SCM190 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.88 - Grade Unit: % - Intercept: 33.2 m - From: 213.8 m - To: 246.9 m - Hole Depth: 264 m - Intercept Depth: 213.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM190:213.8-246.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945917 - CRS: NAD 83 UTM Zone 8N - Azimuth: 298 ° - Dip: -80.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.49 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Hole 26SCM190 delivered a strong copper intercept over a substantial width, confirming and delineating high-grade mineralization within the Minto North resource area, which is highly positive for mine planning. - Positive factor: High-grade copper intercept over a significant width. - Positive factor: Infill drilling delineates high-grade mineralization within a priority resource area. - Positive factor: Results will help define the geometry of mining stopes. Evidence · table > 0.88 Context: 33.2 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM190 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-28) Minto North · gold #### Identity - Hole ID: 26SCM190 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.78 - Grade Unit: g/t - Intercept: 33.2 m - From: 213.8 m - To: 246.9 m - Hole Depth: 264 m - Intercept Depth: 213.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM190:213.8-246.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945917 - CRS: NAD 83 UTM Zone 8N - Azimuth: 298 ° - Dip: -80.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.49 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade contributes significantly to the overall high-grade intercept in hole 26SCM190, confirming and delineating high-grade mineralization within the Minto North resource area. - Positive factor: High-grade gold intercept over a significant width. - Positive factor: Infill drilling delineates high-grade mineralization within a priority resource area. - Positive factor: Results will help define the geometry of mining stopes. Evidence · table > 0.78 Context: 33.2 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM190 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-29) Minto North · silver #### Identity - Hole ID: 26SCM190 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 4.6 - Grade Unit: g/t - Intercept: 33.2 m - From: 213.8 m - To: 246.9 m - Hole Depth: 264 m - Intercept Depth: 213.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM190:213.8-246.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945917 - CRS: NAD 83 UTM Zone 8N - Azimuth: 298 ° - Dip: -80.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.49 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade contributes to the overall high-grade intercept in hole 26SCM190, confirming and delineating high-grade mineralization within the Minto North resource area. - Positive factor: Good silver grade. - Positive factor: Infill drilling delineates high-grade mineralization within a priority resource area. - Positive factor: Results will help define the geometry of mining stopes. Evidence · table > 4.6 Context: 33.2 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM190 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-30) Minto North · copper #### Identity - Hole ID: 26SCM190 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.69 - Grade Unit: % - Intercept: 9 m - From: 238 m - To: 246.9 m - Hole Depth: 264 m - Intercept Depth: 213.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM190:238-246.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945917 - CRS: NAD 83 UTM Zone 8N - Azimuth: 298 ° - Dip: -80.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.4 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM190 shows bonanza-grade copper over a good width, significantly enhancing the overall intercept and confirming high-grade mineralization within the Minto North resource area. - Positive factor: Bonanza grade copper intercept. - Positive factor: Infill drilling delineates high-grade mineralization within a priority resource area. - Positive factor: Results will help define the geometry of mining stopes. Evidence · table > 1.69 Context: 9.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM190 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-31) Minto North · gold #### Identity - Hole ID: 26SCM190 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.11 - Grade Unit: g/t - Intercept: 9 m - From: 238 m - To: 246.9 m - Hole Depth: 264 m - Intercept Depth: 213.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM190:238-246.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945917 - CRS: NAD 83 UTM Zone 8N - Azimuth: 298 ° - Dip: -80.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.4 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM190 shows bonanza-grade gold over a good width, significantly enhancing the overall intercept and confirming high-grade mineralization within the Minto North resource area. - Positive factor: Bonanza grade gold intercept. - Positive factor: Infill drilling delineates high-grade mineralization within a priority resource area. - Positive factor: Results will help define the geometry of mining stopes. Evidence · table > 2.11 Context: 9.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM190 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-32) Minto North · silver #### Identity - Hole ID: 26SCM190 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 10.1 - Grade Unit: g/t - Intercept: 9 m - From: 238 m - To: 246.9 m - Hole Depth: 264 m - Intercept Depth: 213.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM190:238-246.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945917 - CRS: NAD 83 UTM Zone 8N - Azimuth: 298 ° - Dip: -80.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.4 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM190 shows a strong silver grade, significantly enhancing the overall intercept and confirming high-grade mineralization within the Minto North resource area. - Positive factor: High-grade silver intercept. - Positive factor: Infill drilling delineates high-grade mineralization within a priority resource area. - Positive factor: Results will help define the geometry of mining stopes. Evidence · table > 10.1 Context: 9.0 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM191 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-33) Minto North · copper #### Identity - Hole ID: 26SCM191 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.74 - Grade Unit: % - Intercept: 9.6 m - From: 79.3 m - To: 88.9 m - Hole Depth: 225 m - Intercept Depth: 79.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM191:79.3-88.9 #### Location - Location: Copper Keel - Easting: 385841 - Northing: 6943565 - CRS: NAD 83 UTM Zone 8N - Azimuth: 82 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.84 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM191 confirms geological continuity but with a grade that is lower than expected, contributing to limited resource expansion potential in Copper Keel. - Positive factor: Good copper grade for an infill hole. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.74 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM191 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-34) Minto North · gold #### Identity - Hole ID: 26SCM191 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.2 - Grade Unit: g/t - Intercept: 9.6 m - From: 79.3 m - To: 88.9 m - Hole Depth: 225 m - Intercept Depth: 79.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM191:79.3-88.9 #### Location - Location: Copper Keel - Easting: 385841 - Northing: 6943565 - CRS: NAD 83 UTM Zone 8N - Azimuth: 82 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.84 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.20 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM191 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-35) Minto North · silver #### Identity - Hole ID: 26SCM191 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.3 - Grade Unit: g/t - Intercept: 9.6 m - From: 79.3 m - To: 88.9 m - Hole Depth: 225 m - Intercept Depth: 79.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM191:79.3-88.9 #### Location - Location: Copper Keel - Easting: 385841 - Northing: 6943565 - CRS: NAD 83 UTM Zone 8N - Azimuth: 82 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.84 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is very low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 1.3 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM192 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-36) Minto North · copper #### Identity - Hole ID: 26SCM192 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.26 - Grade Unit: % - Intercept: 5.8 m - From: 204.9 m - To: 210.7 m - Hole Depth: 330 m - Intercept Depth: 204.9 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM192:204.9-210.7 #### Location - Location: Area 118 - Easting: 384852 - Northing: 6944157 - CRS: NAD 83 UTM Zone 8N - Azimuth: 110 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.5 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM192 is a good infill result, confirming the modeled geometry and increasing confidence in grade estimation at Area 118. - Positive factor: Good copper grade over a moderate width. - Positive factor: Confirms modeled geometry of mineralized lenses. Evidence · table > 1.26 Context: 5.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM192 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-37) Minto North · gold #### Identity - Hole ID: 26SCM192 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.37 - Grade Unit: g/t - Intercept: 5.8 m - From: 204.9 m - To: 210.7 m - Hole Depth: 330 m - Intercept Depth: 204.9 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM192:204.9-210.7 #### Location - Location: Area 118 - Easting: 384852 - Northing: 6944157 - CRS: NAD 83 UTM Zone 8N - Azimuth: 110 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.5 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill intercept at Area 118. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms modeled geometry of mineralized lenses. Evidence · table > 0.37 Context: 5.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM192 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-38) Minto North · silver #### Identity - Hole ID: 26SCM192 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 5.2 - Grade Unit: g/t - Intercept: 5.8 m - From: 204.9 m - To: 210.7 m - Hole Depth: 330 m - Intercept Depth: 204.9 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM192:204.9-210.7 #### Location - Location: Area 118 - Easting: 384852 - Northing: 6944157 - CRS: NAD 83 UTM Zone 8N - Azimuth: 110 ° - Dip: -81 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.5 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill intercept at Area 118. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms modeled geometry of mineralized lenses. Evidence · table > 5.2 Context: 5.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM193 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-39) Minto North · copper #### Identity - Hole ID: 26SCM193 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.98 - Grade Unit: % - Intercept: 9.6 m - From: 82.3 m - To: 91.9 m - Hole Depth: 225 m - Intercept Depth: 82.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM193:82.3-91.9 #### Location - Location: Copper Keel - Easting: 385841 - Northing: 6943561 - CRS: NAD 83 UTM Zone 8N - Azimuth: 138 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.04 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM193 confirms geological continuity but with a grade that is lower than expected, contributing to limited resource expansion potential in Copper Keel. - Positive factor: Good copper grade for an infill hole. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.98 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM193 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-40) Minto North · gold #### Identity - Hole ID: 26SCM193 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.17 - Grade Unit: g/t - Intercept: 9.6 m - From: 82.3 m - To: 91.9 m - Hole Depth: 225 m - Intercept Depth: 82.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM193:82.3-91.9 #### Location - Location: Copper Keel - Easting: 385841 - Northing: 6943561 - CRS: NAD 83 UTM Zone 8N - Azimuth: 138 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.04 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.17 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM193 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-41) Minto North · silver #### Identity - Hole ID: 26SCM193 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.4 - Grade Unit: g/t - Intercept: 9.6 m - From: 82.3 m - To: 91.9 m - Hole Depth: 225 m - Intercept Depth: 82.3 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM193:82.3-91.9 #### Location - Location: Copper Keel - Easting: 385841 - Northing: 6943561 - CRS: NAD 83 UTM Zone 8N - Azimuth: 138 ° - Dip: -77 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.04 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is very low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 1.4 Context: 9.6 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM194 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-42) Minto North · copper #### Identity - Hole ID: 26SCM194 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.75 - Grade Unit: % - Intercept: 13.7 m - From: 81 m - To: 94.7 m - Hole Depth: 234 m - Intercept Depth: 81 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM194:81-94.7 #### Location - Location: Copper Keel - Easting: 385843 - Northing: 6943559 - CRS: NAD 83 UTM Zone 8N - Azimuth: 5 ° - Dip: -76 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM194 confirms geological continuity but with a grade that is lower than expected, contributing to limited resource expansion potential in Copper Keel. - Positive factor: Good copper grade over a moderate width. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.75 Context: 13.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM194 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-43) Minto North · gold #### Identity - Hole ID: 26SCM194 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.15 - Grade Unit: g/t - Intercept: 13.7 m - From: 81 m - To: 94.7 m - Hole Depth: 234 m - Intercept Depth: 81 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM194:81-94.7 #### Location - Location: Copper Keel - Easting: 385843 - Northing: 6943559 - CRS: NAD 83 UTM Zone 8N - Azimuth: 5 ° - Dip: -76 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.15 Context: 13.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM194 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-44) Minto North · silver #### Identity - Hole ID: 26SCM194 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.1 - Grade Unit: g/t - Intercept: 13.7 m - From: 81 m - To: 94.7 m - Hole Depth: 234 m - Intercept Depth: 81 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM194:81-94.7 #### Location - Location: Copper Keel - Easting: 385843 - Northing: 6943559 - CRS: NAD 83 UTM Zone 8N - Azimuth: 5 ° - Dip: -76 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.81 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is very low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 1.1 Context: 13.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM195 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-45) Minto North · copper #### Identity - Hole ID: 26SCM195 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.93 - Grade Unit: % - Intercept: 5.8 m - From: 79.1 m - To: 84.9 m - Hole Depth: 330 m - Intercept Depth: 79.1 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM195:79.1-84.9 #### Location - Location: Minto Main - Easting: 384697 - Northing: 6944581 - CRS: NAD 83 UTM Zone 8N - Azimuth: 212 ° - Dip: -75 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.05 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM195 is a good infill result, confirming the continuity of mineralization at Minto Main with a solid grade and width. - Positive factor: Good copper grade over a moderate width. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.93 Context: 5.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM195 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-46) Minto North · gold #### Identity - Hole ID: 26SCM195 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.21 - Grade Unit: g/t - Intercept: 5.8 m - From: 79.1 m - To: 84.9 m - Hole Depth: 330 m - Intercept Depth: 79.1 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM195:79.1-84.9 #### Location - Location: Minto Main - Easting: 384697 - Northing: 6944581 - CRS: NAD 83 UTM Zone 8N - Azimuth: 212 ° - Dip: -75 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.05 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill intercept at Minto Main. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 0.21 Context: 5.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM195 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-47) Minto North · silver #### Identity - Hole ID: 26SCM195 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.7 - Grade Unit: g/t - Intercept: 5.8 m - From: 79.1 m - To: 84.9 m - Hole Depth: 330 m - Intercept Depth: 79.1 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM195:79.1-84.9 #### Location - Location: Minto Main - Easting: 384697 - Northing: 6944581 - CRS: NAD 83 UTM Zone 8N - Azimuth: 212 ° - Dip: -75 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.05 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill intercept at Minto Main. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of mineralization in an infill hole. Evidence · table > 3.7 Context: 5.8 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM196 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-48) Minto North · copper #### Identity - Hole ID: 26SCM196 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.57 - Grade Unit: % - Intercept: 9.4 m - From: 211.5 m - To: 220.9 m - Hole Depth: 276 m - Intercept Depth: 211.5 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM196:211.5-220.9 #### Location - Location: Minto North - Easting: 384007 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 219.5 ° - Dip: -71.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.71 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM196 is a good infill result, confirming the continuity of mineralization at Minto North. - Positive factor: Good copper grade for an infill hole. - Positive factor: Confirms continuity of mineralization. Evidence · table > 0.57 Context: 9.4 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM196 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-49) Minto North · gold #### Identity - Hole ID: 26SCM196 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.2 - Grade Unit: g/t - Intercept: 9.4 m - From: 211.5 m - To: 220.9 m - Hole Depth: 276 m - Intercept Depth: 211.5 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM196:211.5-220.9 #### Location - Location: Minto North - Easting: 384007 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 219.5 ° - Dip: -71.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.71 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill intercept at Minto North. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of mineralization. Evidence · table > 0.20 Context: 9.4 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM196 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-50) Minto North · silver #### Identity - Hole ID: 26SCM196 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2 - Grade Unit: g/t - Intercept: 9.4 m - From: 211.5 m - To: 220.9 m - Hole Depth: 276 m - Intercept Depth: 211.5 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM196:211.5-220.9 #### Location - Location: Minto North - Easting: 384007 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 219.5 ° - Dip: -71.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.71 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill intercept at Minto North. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of mineralization. Evidence · table > 2.0 Context: 9.4 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM196 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-51) Minto North · copper #### Identity - Hole ID: 26SCM196 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.03 - Grade Unit: % - Intercept: 2.1 m - From: 242.6 m - To: 244.7 m - Hole Depth: 276 m - Intercept Depth: 211.5 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM196:242.6-244.7 #### Location - Location: Minto North - Easting: 384007 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 219.5 ° - Dip: -71.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.84 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM196 shows a high-grade copper intercept over a narrow width, enhancing the overall infill result at Minto North. - Positive factor: High-grade copper intercept. - Positive factor: Confirms continuity of mineralization. Evidence · table > 2.03 Context: 2.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM196 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-52) Minto North · gold #### Identity - Hole ID: 26SCM196 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.1 - Grade Unit: g/t - Intercept: 2.1 m - From: 242.6 m - To: 244.7 m - Hole Depth: 276 m - Intercept Depth: 211.5 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM196:242.6-244.7 #### Location - Location: Minto North - Easting: 384007 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 219.5 ° - Dip: -71.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.84 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM196 shows a high-grade gold intercept, enhancing the overall infill result at Minto North. - Positive factor: High-grade gold intercept. - Positive factor: Confirms continuity of mineralization. Evidence · table > 1.10 Context: 2.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM196 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-53) Minto North · silver #### Identity - Hole ID: 26SCM196 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 9.4 - Grade Unit: g/t - Intercept: 2.1 m - From: 242.6 m - To: 244.7 m - Hole Depth: 276 m - Intercept Depth: 211.5 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM196:242.6-244.7 #### Location - Location: Minto North - Easting: 384007 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 219.5 ° - Dip: -71.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.84 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM196 shows a good silver grade, enhancing the overall infill result at Minto North. - Positive factor: Good silver grade. - Positive factor: Confirms continuity of mineralization. Evidence · table > 9.4 Context: 2.1 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM200 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-54) Minto North · copper #### Identity - Hole ID: 26SCM200 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.47 - Grade Unit: % - Intercept: 18.5 m - From: 216.4 m - To: 234.9 m - Hole Depth: 261 m - Intercept Depth: 216.4 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM200:216.4-234.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 209 ° - Dip: -82.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.56 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM200 is a moderate infill result, confirming the continuity of mineralization at Minto North but with a lower grade. - Positive factor: Confirms continuity of mineralization. Evidence · table > 0.47 Context: 18.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM200 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-55) Minto North · gold #### Identity - Hole ID: 26SCM200 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.14 - Grade Unit: g/t - Intercept: 18.5 m - From: 216.4 m - To: 234.9 m - Hole Depth: 261 m - Intercept Depth: 216.4 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM200:216.4-234.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 209 ° - Dip: -82.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.56 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is low and contributes to the overall lower-grade infill intercept at Minto North. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of mineralization. Evidence · table > 0.14 Context: 18.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM200 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-56) Minto North · silver #### Identity - Hole ID: 26SCM200 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.7 - Grade Unit: g/t - Intercept: 18.5 m - From: 216.4 m - To: 234.9 m - Hole Depth: 261 m - Intercept Depth: 216.4 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM200:216.4-234.9 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945912 - CRS: NAD 83 UTM Zone 8N - Azimuth: 209 ° - Dip: -82.5 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.56 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is very low and contributes to the overall lower-grade infill intercept at Minto North. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of mineralization. Evidence · table > 1.7 Context: 18.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM202 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-57) Minto North · copper #### Identity - Hole ID: 26SCM202 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.72 - Grade Unit: % - Intercept: 8.5 m - From: 223 m - To: 231.5 m - Hole Depth: 279 m - Intercept Depth: 223 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM202:223-231.5 #### Location - Location: Area 118 - Easting: 384950 - Northing: 6944260 - CRS: NAD 83 UTM Zone 8N - Azimuth: 97 ° - Dip: -80 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.97 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM202 is a good infill result, confirming the modeled geometry and increasing confidence in grade estimation at Area 118. - Positive factor: Good copper grade over a moderate width. - Positive factor: Confirms modeled geometry of mineralized lenses. Evidence · table > 0.72 Context: 8.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM202 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-58) Minto North · gold #### Identity - Hole ID: 26SCM202 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.35 - Grade Unit: g/t - Intercept: 8.5 m - From: 223 m - To: 231.5 m - Hole Depth: 279 m - Intercept Depth: 223 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM202:223-231.5 #### Location - Location: Area 118 - Easting: 384950 - Northing: 6944260 - CRS: NAD 83 UTM Zone 8N - Azimuth: 97 ° - Dip: -80 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.97 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is moderate and contributes to the overall value of the infill intercept at Area 118. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms modeled geometry of mineralized lenses. Evidence · table > 0.35 Context: 8.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM202 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-59) Minto North · silver #### Identity - Hole ID: 26SCM202 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.2 - Grade Unit: g/t - Intercept: 8.5 m - From: 223 m - To: 231.5 m - Hole Depth: 279 m - Intercept Depth: 223 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM202:223-231.5 #### Location - Location: Area 118 - Easting: 384950 - Northing: 6944260 - CRS: NAD 83 UTM Zone 8N - Azimuth: 97 ° - Dip: -80 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.97 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is low but contributes to the overall metal content of the infill intercept at Area 118. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms modeled geometry of mineralized lenses. Evidence · table > 3.2 Context: 8.5 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM204 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-60) Minto North · copper #### Identity - Hole ID: 26SCM204 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.89 - Grade Unit: % - Intercept: 11.2 m - From: 158.2 m - To: 169.4 m - Hole Depth: 180 m - Intercept Depth: 158.2 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM204:158.2-169.4 #### Location - Location: Copper Keel - Easting: 385793 - Northing: 6943571 - CRS: NAD 83 UTM Zone 8N - Azimuth: 128 ° - Dip: -80 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.91 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The copper intercept in hole 26SCM204 confirms geological continuity but with a grade that is lower than expected, contributing to limited resource expansion potential in Copper Keel. - Positive factor: Good copper grade for an infill hole. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.89 Context: 11.2 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM204 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-61) Minto North · gold #### Identity - Hole ID: 26SCM204 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.12 - Grade Unit: g/t - Intercept: 11.2 m - From: 158.2 m - To: 169.4 m - Hole Depth: 180 m - Intercept Depth: 158.2 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM204:158.2-169.4 #### Location - Location: Copper Keel - Easting: 385793 - Northing: 6943571 - CRS: NAD 83 UTM Zone 8N - Azimuth: 128 ° - Dip: -80 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.91 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade is low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Gold is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 0.12 Context: 11.2 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM204 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-62) Minto North · silver #### Identity - Hole ID: 26SCM204 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.2 - Grade Unit: g/t - Intercept: 11.2 m - From: 158.2 m - To: 169.4 m - Hole Depth: 180 m - Intercept Depth: 158.2 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM204:158.2-169.4 #### Location - Location: Copper Keel - Easting: 385793 - Northing: 6943571 - CRS: NAD 83 UTM Zone 8N - Azimuth: 128 ° - Dip: -80 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 0.91 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade is very low and contributes to the overall lower-than-expected grades in this infill hole at Copper Keel. - Positive factor: Silver is a valuable byproduct. - Positive factor: Confirms continuity of the geological model. - Negative factor: Grade is somewhat lower than expected for the Copper Keel area. Evidence · table > 1.2 Context: 11.2 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-63) Minto North · copper #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.87 - Grade Unit: % - Intercept: 13.3 m - From: 168.8 m - To: 182 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM205:168.8-182 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Hole 26SCM205 delivered a strong copper intercept over a substantial width, with an unexpected upper interval suggesting significant new mineralization and expansion potential at Minto North. - Positive factor: High-grade copper intercept over a significant width. - Positive factor: Step-out drilling intersected new mineralization beyond a previously interpreted fault. - Positive factor: Upper interval was not anticipated, indicating potential for further expansion southwards. Evidence · table > 1.87 Context: 13.3 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-64) Minto North · gold #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.46 - Grade Unit: g/t - Intercept: 13.3 m - From: 168.8 m - To: 182 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM205:168.8-182 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The gold grade contributes significantly to the overall high-grade intercept in hole 26SCM205, with an unexpected upper interval suggesting significant new mineralization and expansion potential at Minto North. - Positive factor: High-grade gold intercept. - Positive factor: Step-out drilling intersected new mineralization beyond a previously interpreted fault. - Positive factor: Upper interval was not anticipated, indicating potential for further expansion southwards. Evidence · table > 0.46 Context: 13.3 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-65) Minto North · silver #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 17.5 - Grade Unit: g/t - Intercept: 13.3 m - From: 168.8 m - To: 182 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM205:168.8-182 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.25 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The silver grade contributes significantly to the overall high-grade intercept in hole 26SCM205, with an unexpected upper interval suggesting significant new mineralization and expansion potential at Minto North. - Positive factor: High-grade silver intercept. - Positive factor: Step-out drilling intersected new mineralization beyond a previously interpreted fault. - Positive factor: Upper interval was not anticipated, indicating potential for further expansion southwards. Evidence · table > 17.5 Context: 13.3 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-66) Minto North · copper #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.43 - Grade Unit: % - Intercept: 3.7 m - From: 173.5 m - To: 177.2 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM205:173.5-177.2 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.87 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM205 shows bonanza-grade copper over a good width, significantly enhancing the overall intercept and indicating strong new mineralization and expansion potential at Minto North. - Positive factor: Bonanza grade copper intercept. - Positive factor: Part of a significant step-out, indicating strong expansion potential. - Positive factor: Upper interval was not anticipated, indicating potential for further expansion southwards. Evidence · table > 3.43 Context: 3.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-67) Minto North · gold #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.36 - Grade Unit: g/t - Intercept: 3.7 m - From: 173.5 m - To: 177.2 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM205:173.5-177.2 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.87 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM205 shows a strong gold grade, significantly enhancing the overall intercept and indicating strong new mineralization and expansion potential at Minto North. - Positive factor: High-grade gold intercept. - Positive factor: Part of a significant step-out, indicating strong expansion potential. - Positive factor: Upper interval was not anticipated, indicating potential for further expansion southwards. Evidence · table > 0.36 Context: 3.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-68) Minto North · silver #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 47 - Grade Unit: g/t - Intercept: 3.7 m - From: 173.5 m - To: 177.2 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: exploration - Sample Type: drill - Group ID: 26SCM205:173.5-177.2 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.87 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The sub-interval in hole 26SCM205 shows a high-grade silver intercept, significantly enhancing the overall intercept and indicating strong new mineralization and expansion potential at Minto North. - Positive factor: High-grade silver intercept. - Positive factor: Part of a significant step-out, indicating strong expansion potential. - Positive factor: Upper interval was not anticipated, indicating potential for further expansion southwards. Evidence · table > 47.0 Context: 3.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-69) Minto North · copper #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.85 - Grade Unit: % - Intercept: 4.7 m - From: 209.7 m - To: 214.3 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM205:209.7-214.3 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.5 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The 'and' interval in hole 26SCM205 shows a high-grade copper intercept over a narrow width, contributing positively to the infill results at Minto North. - Positive factor: High-grade copper intercept. - Positive factor: Confirms continuity of mineralization. Evidence · table > 1.85 Context: 4.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-70) Minto North · gold #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.86 - Grade Unit: g/t - Intercept: 4.7 m - From: 209.7 m - To: 214.3 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM205:209.7-214.3 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.5 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The 'and' interval in hole 26SCM205 shows a high-grade gold intercept, contributing positively to the infill results at Minto North. - Positive factor: High-grade gold intercept. - Positive factor: Confirms continuity of mineralization. Evidence · table > 0.86 Context: 4.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### 26SCM205 [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-71) Minto North · silver #### Identity - Hole ID: 26SCM205 - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 12.1 - Grade Unit: g/t - Intercept: 4.7 m - From: 209.7 m - To: 214.3 m - Hole Depth: 237 m - Intercept Depth: 168.8 m #### Classification - Program: resource - Sample Type: drill - Group ID: 26SCM205:209.7-214.3 #### Location - Location: Minto North - Easting: 384008 - Northing: 6945911 - CRS: NAD 83 UTM Zone 8N - Azimuth: 204 ° - Dip: -64 ° - Loc. Confidence: high - Loc. Source: document #### QA/QC - Laboratory: ALS - QA/QC Disclosed: Yes - Lab Certified: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.5 - Metal Eq. Unit: % CuEq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The 'and' interval in hole 26SCM205 shows a good silver grade, contributing positively to the infill results at Minto North. - Positive factor: Good silver grade. - Positive factor: Confirms continuity of mineralization. Evidence · table > 12.1 Context: 4.7 #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **Infill Drilling** Polarity: neutral Definition: Confirmatory drilling to raise resource confidence, not new discovery. Why it applies: drill\_program\_type is "resource" ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-75) Minto North · copper #### Identity - Hole ID: incl. - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.39 - Grade Unit: % - Intercept: 6 m - From: 318 m - To: 324 m - Intercept Depth: 318 m #### Classification - Sample Type: drill - Group ID: incl.:318-324 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.73 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 3.39 % copper is exceptional against the default band \[2.5, 1, 0.5, 0.25\] %. Grade×width 20.3 %·m is weak \(grade alone is exceptional; the better of the two is used\). - Positive factor: 3.39 % copper is exceptional on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 3.39 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-76) Minto North · gold #### Identity - Hole ID: incl. - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.61 - Grade Unit: g/t - Intercept: 6 m - From: 318 m - To: 324 m - Intercept Depth: 318 m #### Classification - Sample Type: drill - Group ID: incl.:318-324 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.73 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 0.61 g/t gold is weak against the open\_pit mining band \[5, 2, 1, 0.3\] g/t. Grade×width 3.7 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.61 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-77) Minto North · silver #### Identity - Hole ID: incl. - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 16.5 - Grade Unit: g/t - Intercept: 6 m - From: 318 m - To: 324 m - Intercept Depth: 318 m #### Classification - Sample Type: drill - Group ID: incl.:318-324 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.73 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 16.5 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 99.0 g/t·m is below. - Negative factor: 16.5 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 16.5 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-78) Minto North · copper #### Identity - Hole ID: incl. - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.99 - Grade Unit: % - Intercept: 7.7 m - From: 282.3 m - To: 290 m - Intercept Depth: 282.3 m #### Classification - Sample Type: drill - Group ID: incl.:282.3-290 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.21 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 0.99 % copper is moderate against the default band \[2.5, 1, 0.5, 0.25\] %. Grade×width 7.6 %·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.99 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-79) Minto North · gold #### Identity - Hole ID: incl. - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.36 - Grade Unit: g/t - Intercept: 7.7 m - From: 282.3 m - To: 290 m - Intercept Depth: 282.3 m #### Classification - Sample Type: drill - Group ID: incl.:282.3-290 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.21 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 0.36 g/t gold is weak against the open\_pit mining band \[5, 2, 1, 0.3\] g/t. Grade×width 2.8 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.36 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-80) Minto North · silver #### Identity - Hole ID: incl. - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.7 - Grade Unit: g/t - Intercept: 7.7 m - From: 282.3 m - To: 290 m - Intercept Depth: 282.3 m #### Classification - Sample Type: drill - Group ID: incl.:282.3-290 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 1.21 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 2.7 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 20.8 g/t·m is below. - Negative factor: 2.7 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.7 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-81) Minto North · copper #### Identity - Hole ID: incl. - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.69 - Grade Unit: % - Intercept: 9 m - From: 238 m - To: 246.9 m - Intercept Depth: 238 m #### Classification - Sample Type: drill - Group ID: incl.:238-246.9 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.4 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 1.69 % copper is strong against the default band \[2.5, 1, 0.5, 0.25\] %. Grade×width 15.2 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 1.69 % copper is strong on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.69 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-82) Minto North · gold #### Identity - Hole ID: incl. - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.11 - Grade Unit: g/t - Intercept: 9 m - From: 238 m - To: 246.9 m - Intercept Depth: 238 m #### Classification - Sample Type: drill - Group ID: incl.:238-246.9 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.4 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 2.11 g/t gold is strong against the open\_pit mining band \[5, 2, 1, 0.3\] g/t. Grade×width 19.0 g/t·m is weak \(grade alone is strong; the better of the two is used\). - Positive factor: 2.11 g/t gold is strong on the open\_pit mining band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.11 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-83) Minto North · silver #### Identity - Hole ID: incl. - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 10.1 - Grade Unit: g/t - Intercept: 9 m - From: 238 m - To: 246.9 m - Intercept Depth: 238 m #### Classification - Sample Type: drill - Group ID: incl.:238-246.9 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.4 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 10.1 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 90.9 g/t·m is below. - Negative factor: 10.1 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 10.1 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### and [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-84) Minto North · copper #### Identity - Hole ID: and - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 2.03 - Grade Unit: % - Intercept: 2.1 m - From: 242.6 m - To: 244.7 m - Intercept Depth: 242.6 m #### Classification - Sample Type: drill - Group ID: and:242.6-244.7 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 2.03 % copper is strong against the default band \[2.5, 1, 0.5, 0.25\] %. Grade×width 4.3 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 2.03 % copper is strong on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 2.03 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### and [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-85) Minto North · gold #### Identity - Hole ID: and - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.1 - Grade Unit: g/t - Intercept: 2.1 m - From: 242.6 m - To: 244.7 m - Intercept Depth: 242.6 m #### Classification - Sample Type: drill - Group ID: and:242.6-244.7 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 1.1 g/t gold is moderate against the open\_pit mining band \[5, 2, 1, 0.3\] g/t. Grade×width 2.3 g/t·m is below \(grade alone is moderate; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.10 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### and [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-86) Minto North · silver #### Identity - Hole ID: and - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 9.4 - Grade Unit: g/t - Intercept: 2.1 m - From: 242.6 m - To: 244.7 m - Intercept Depth: 242.6 m #### Classification - Sample Type: drill - Group ID: and:242.6-244.7 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.84 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 9.4 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 19.7 g/t·m is below. - Negative factor: 9.4 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 9.4 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-87) Minto North · copper #### Identity - Hole ID: incl. - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 3.43 - Grade Unit: % - Intercept: 3.7 m - From: 173.5 m - To: 177.2 m - Intercept Depth: 173.5 m #### Classification - Sample Type: drill - Group ID: incl.:173.5-177.2 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.87 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 3.43 % copper is exceptional against the default band \[2.5, 1, 0.5, 0.25\] %. Grade×width 12.7 %·m is below \(grade alone is exceptional; the better of the two is used\). - Positive factor: 3.43 % copper is exceptional on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 3.43 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-88) Minto North · gold #### Identity - Hole ID: incl. - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.36 - Grade Unit: g/t - Intercept: 3.7 m - From: 173.5 m - To: 177.2 m - Intercept Depth: 173.5 m #### Classification - Sample Type: drill - Group ID: incl.:173.5-177.2 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.87 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 0.36 g/t gold is weak against the open\_pit mining band \[5, 2, 1, 0.3\] g/t. Grade×width 1.3 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.36 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### incl. [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-89) Minto North · silver #### Identity - Hole ID: incl. - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 47 - Grade Unit: g/t - Intercept: 3.7 m - From: 173.5 m - To: 177.2 m - Intercept Depth: 173.5 m #### Classification - Sample Type: drill - Group ID: incl.:173.5-177.2 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 3.87 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 47 g/t silver is weak against the default band \[500, 200, 100, 30\] g/t. Grade×width 173.9 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 47.0 Context: incl. #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### and [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-90) Minto North · copper #### Identity - Hole ID: and - Project: Minto North - Commodity: copper - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 1.85 - Grade Unit: % - Intercept: 4.7 m - From: 209.7 m - To: 214.3 m - Intercept Depth: 209.7 m #### Classification - Sample Type: drill - Group ID: and:209.7-214.3 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.5 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 1.85 % copper is strong against the default band \[2.5, 1, 0.5, 0.25\] %. Grade×width 8.7 %·m is below \(grade alone is strong; the better of the two is used\). - Positive factor: 1.85 % copper is strong on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 1.85 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### and [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-91) Minto North · gold #### Identity - Hole ID: and - Project: Minto North - Commodity: gold - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 0.86 - Grade Unit: g/t - Intercept: 4.7 m - From: 209.7 m - To: 214.3 m - Intercept Depth: 209.7 m #### Classification - Sample Type: drill - Group ID: and:209.7-214.3 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.5 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 0.86 g/t gold is weak against the open\_pit mining band \[5, 2, 1, 0.3\] g/t. Grade×width 4.0 g/t·m is below \(grade alone is weak; the better of the two is used\). - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 0.86 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ### and [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-drill-facts-92) Minto North · silver #### Identity - Hole ID: and - Project: Minto North - Commodity: silver - Region: canada\_yt - Reported Region: canada\_yt - Ticker: SCMI #### Geometry - Grade: 12.1 - Grade Unit: g/t - Intercept: 4.7 m - From: 209.7 m - To: 214.3 m - Intercept Depth: 209.7 m #### Classification - Sample Type: drill - Group ID: and:209.7-214.3 - Mining Method: open\_pit #### Location - CRS: NAD 83 UTM Zone 8N #### QA/QC - QA/QC Disclosed: Yes - QP Signed: Yes - QA/QC Methods: standards, blanks, duplicates #### Metal Equivalent - Metal Eq. Grade: 2.5 - Metal Eq. Unit: % Cu-Eq - Assumptions Disclosed: Yes #### Review - Needs Review: No - Interp. Status: scored - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: Expanded from assay table. 12.1 g/t silver is below against the default band \[500, 200, 100, 30\] g/t. Grade×width 56.9 g/t·m is below. - Negative factor: 12.1 g/t silver is below the weak threshold \(30 g/t\) on the default band. - Negative factor: Scored from rubric bands during table expansion, not from document context. Evidence · table > 12.1 Context: and #### Tags used in scoring **QA/QC Disclosed** Polarity: positive Definition: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods \(blanks, standards, duplicates\). Why it applies: qaqc\_disclosed is true **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated ## Resource Estimates (3) ### inferred [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-resource-facts-72) Minto Project · copper #### Identity - Project: Minto Project - Commodity: copper - Region: canada\_yt - Reported Region: Yukon, Canada - Ticker: SCMI #### Resource scope - Estimate type: resource - Effective date: 2026-06-10T00:00:00.000Z - Reporting standards: ni\_43\_101 - QP Signed: Yes - Qualified person names: Sue Bird - Resource group id: resource:e9bf99105da9ee7132b4 - Mining method: combined #### Resource Data - Category: inferred - Tonnes: 16865000 - Grade: 0.76 - Grade Unit: % - Contained Metal: 281 - Contained Unit: mlbs #### Prior Estimate - Resource Date: 2026-06-10 #### Metal Equivalent - Assumptions Disclosed: Yes #### Location - CRS: NAD 83 UTM Zone 8N #### Review - Needs Review: No - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The total inferred copper resource contributes to the overall resource base with a good grade, but has lower confidence due to its category. - Positive factor: Adds to overall resource base. - Positive factor: Good copper grade for combined mining methods. - Positive factor: Resource is CIM compliant and QP signed. - Negative factor: Inferred category has lower geological confidence. Evidence · table > 0.76 Context: 16,865 #### Tags used in scoring **Inferred Resource** Polarity: negative Definition: Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone. Why it applies: category is "inferred" **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **QP/CP Signed** Polarity: positive Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Why it applies: qp\_signed is true **NI 43-101 Compliant** Polarity: positive Definition: Resource estimate prepared in compliance with NI 43-101 \(Canada\) — high reporting standard. Why it applies: reporting\_standards includes ni\_43\_101 ### inferred [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-resource-facts-73) Minto Project · gold #### Identity - Project: Minto Project - Commodity: gold - Region: canada\_yt - Reported Region: Yukon, Canada - Ticker: SCMI #### Resource scope - Estimate type: resource - Effective date: 2026-06-10T00:00:00.000Z - Reporting standards: ni\_43\_101 - QP Signed: Yes - Qualified person names: Sue Bird - Resource group id: resource:e9bf99105da9ee7132b4 - Mining method: combined #### Resource Data - Category: inferred - Tonnes: 16865000 - Grade: 0.26 - Grade Unit: g/t - Contained Metal: 142 - Contained Unit: koz #### Prior Estimate - Resource Date: 2026-06-10 #### Metal Equivalent - Assumptions Disclosed: Yes #### Location - CRS: NAD 83 UTM Zone 8N #### Review - Needs Review: No - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The total inferred gold resource contributes to the overall resource base with a good grade, but has lower confidence due to its category. - Positive factor: Adds to overall resource base. - Positive factor: Gold is a valuable byproduct. - Positive factor: Resource is CIM compliant and QP signed. - Negative factor: Inferred category has lower geological confidence. Evidence · table > 0.26 Context: 16,865 #### Tags used in scoring **Inferred Resource** Polarity: negative Definition: Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone. Why it applies: category is "inferred" **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **QP/CP Signed** Polarity: positive Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Why it applies: qp\_signed is true **NI 43-101 Compliant** Polarity: positive Definition: Resource estimate prepared in compliance with NI 43-101 \(Canada\) — high reporting standard. Why it applies: reporting\_standards includes ni\_43\_101 ### inferred [Link to this fact](https://atlas-extractions.minestarters.com/news/selkirk-copper-reports-additional-results-from-the-phase-2-drill-program-includi--dde58a18-007d-4757-ab32-104879d13a52#fact-resource-facts-74) Minto Project · silver #### Identity - Project: Minto Project - Commodity: silver - Region: canada\_yt - Reported Region: Yukon, Canada - Ticker: SCMI #### Resource scope - Estimate type: resource - Effective date: 2026-06-10T00:00:00.000Z - Reporting standards: ni\_43\_101 - QP Signed: Yes - Qualified person names: Sue Bird - Resource group id: resource:e9bf99105da9ee7132b4 - Mining method: combined #### Resource Data - Category: inferred - Tonnes: 16865000 - Grade: 2.7 - Grade Unit: g/t - Contained Metal: 1467 - Contained Unit: koz #### Prior Estimate - Resource Date: 2026-06-10 #### Metal Equivalent - Assumptions Disclosed: Yes #### Location - CRS: NAD 83 UTM Zone 8N #### Review - Needs Review: No - Historical: No #### Dates - Event date: 2026-08-20T00:00:00.000Z Reasoning: The total inferred silver resource contributes to the overall resource base with a good grade, but has lower confidence due to its category. - Positive factor: Adds to overall resource base. - Positive factor: Silver is a valuable byproduct. - Positive factor: Resource is CIM compliant and QP signed. - Negative factor: Inferred category has lower geological confidence. Evidence · table > 2.7 Context: 16,865 #### Tags used in scoring **Inferred Resource** Polarity: negative Definition: Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone. Why it applies: category is "inferred" **Cut-off Undisclosed** Polarity: negative Definition: High-grade interval reported without stating the cut-off grade used for compositing. Why it applies: no cutoff\_grade was stated **QP/CP Signed** Polarity: positive Definition: Qualified Person \(QP\) or Competent Person \(CP\) named and signed off — a member of a recognized professional association \(e.g., AusIMM, SME, AIG, P.Geo\) with relevant experience. Why it applies: qp\_signed is true **NI 43-101 Compliant** Polarity: positive Definition: Resource estimate prepared in compliance with NI 43-101 \(Canada\) — high reporting standard. Why it applies: reporting\_standards includes ni\_43\_101 ## How Atlas produces this analysis Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.