Silver North Outlines Largest Exploration Program to Date at Haldane Following 2025 Success
Original announcement by tmx on
- Company
- Silver North Resources Ltd.
- Ticker
- SNAG
- Exchange
- TSX
- Region
- Yukon Territory
- Primary commodity
- Silver
- Secondary commodities
- Gold, Lead, Zinc, Copper, Antimony
- Document categories
- Drill results, Capital raise
- Extracted
- 2026-09-16 22:56:00 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Silver North Resources announced high-grade drill results from its 2025 program at the Haldane project, highlighted by a bonanza silver intercept of 818 g/t over 13.15 meters in hole HLD25-31. The program successfully expanded the Main Fault mineralization along strike and downdip. Additionally, the company reported new silver discoveries from surface samples at its Veronica project and secured over $13 million in financings to fully fund its largest exploration program to date for 2026 and 2027.
Reasoning: Silver North reported exceptional high-grade silver, gold, lead, and zinc drill intercepts from its 2025 program at the Haldane project, including a bonanza intercept, and successfully expanded mineralization. The company also made new silver discoveries at the Veronica project through surface sampling and secured substantial financing to fund its largest exploration program to date for the next two years.
Positive factors
- High-grade silver, gold, lead, and zinc intercepts from 2025 drill program
- Bonanza intercept in HLD25-31
- Successful expansion of Main Fault mineralization
- New silver discoveries at Veronica project from surface sampling
- Significant financings completed, fully funding exploration for two years
- Largest exploration program planned for 2026
Negative factors
- True widths of drill intercepts are unknown
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 110
Extracted facts
Stored fact records: 109. Some facts used in scoring do not have a stored record.
Drill Results (109)
HLD25-31Haldane · silverGrade: 818Grade Unit: g/tIntercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 818
- Grade Unit
- g/t
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
- Intercept Depth
- 249.9 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-31:249.9-263.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 896
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Exceptional silver grade of 818 g/t over 13.15 m, indicating a bonanza intercept.
Positive factors
- Exceptional silver grade
- Significant intercept width
Negative factors
- True width unknown
Evidence · table
“818”
Context: 13.15
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-31Haldane · silverGrade: 2014Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 2014
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
- Intercept Depth
- 251.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-31:251.8-255
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 2055
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Exceptional silver grade of 2,014 g/t over 3.2 m, representing a bonanza sub-interval within a larger high-grade zone.
Positive factors
- Extremely high-grade silver intercept
- Significant width for a sub-interval
Negative factors
- True width unknown
Evidence · table
“2014”
Context: 3.20
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-31Haldane · silverGrade: 1112Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1112
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
- Intercept Depth
- 256.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-31:256.1-257.35
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1446
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Exceptional silver grade of 1,112 g/t over 1.25 m, with very high gold and lead grades, indicating a bonanza sub-interval.
Positive factors
- Exceptional silver grade
- High gold and lead grades
Negative factors
- True width unknown
Evidence · table
“1112”
Context: 1.25
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-32Haldane · silverGrade: 160Grade Unit: g/tIntercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 160
- Grade Unit
- g/t
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
- Intercept Depth
- 153 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-32:153-175.65
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 187
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Strong silver grade of 160 g/t over a significant width of 22.65 m.
Positive factors
- Strong silver grade
- Significant intercept width
Negative factors
- True width unknown
Evidence · table
“160”
Context: 22.65
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-32Haldane · silverGrade: 326Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 326
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
- Intercept Depth
- 165.1 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-32:165.1-171.6
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 346
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver sub-interval of 326 g/t over 6.5 m.
Positive factors
- High-grade silver sub-interval
- Good width
Negative factors
- True width unknown
Evidence · table
“326”
Context: 6.50
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-32Haldane · silverGrade: 1438Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1438
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Intercept Depth
- 169 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-32:169-169.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1428
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Exceptional silver grade of 1,438 g/t over a narrow 0.8 m interval, indicating a bonanza sub-interval.
Positive factors
- Exceptional silver grade
- High lead and zinc grades
Negative factors
- True width unknown
- Narrow intercept
Evidence · table
“1438”
Context: 0.80
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-33Haldane · silverGrade: 176Grade Unit: g/tIntercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 176
- Grade Unit
- g/t
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
- Intercept Depth
- 193.49 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 224
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Strong silver grade of 176 g/t over 5.56 m.
Positive factors
- Strong silver grade
- Good width
Negative factors
- True width unknown
Evidence · table
“176”
Context: 5.56
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-33Haldane · silverGrade: 311Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 311
- Grade Unit
- g/t
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
- Intercept Depth
- 195.35 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-33:195.35-197.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 376
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver sub-interval of 311 g/t over 2.45 m.
Positive factors
- High-grade silver sub-interval
- Good width
Negative factors
- True width unknown
Evidence · table
“311”
Context: 2.45
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-34Haldane · silverGrade: 146Grade Unit: g/tIntercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 146
- Grade Unit
- g/t
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
- Intercept Depth
- 157.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-34:157.5-171.1
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 204
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Moderate silver grade of 146 g/t over a significant width of 13.6 m.
Positive factors
- Moderate silver grade
- Significant intercept width
Negative factors
- True width unknown
Evidence · table
“146”
Context: 13.60
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-34Haldane · silverGrade: 196Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 196
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
- Intercept Depth
- 159 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-34:159-168.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 260
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Strong silver grade of 196 g/t over 9.2 m.
Positive factors
- Strong silver grade
- Good width
Negative factors
- True width unknown
Evidence · table
“196”
Context: 9.20
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-34Haldane · silverGrade: 467Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 467
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
- Intercept Depth
- 165.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-34:165.8-167
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 672
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver sub-interval of 467 g/t over 1.2 m, with very high lead grade.
Positive factors
- High-grade silver sub-interval
- Very high lead grade
Negative factors
- True width unknown
- Narrow intercept
Evidence · table
“467”
Context: 1.20
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · silverGrade: 153Grade Unit: g/tIntercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 153
- Grade Unit
- g/t
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
- Intercept Depth
- 170.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-35:170.6-198.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 172
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Moderate silver grade of 153 g/t over a very significant width of 27.9 m.
Positive factors
- Moderate silver grade
- Very significant intercept width
Negative factors
- True width unknown
Evidence · table
“153”
Context: 27.90
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · silverGrade: 231Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 231
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
- Intercept Depth
- 170.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-35:170.6-185
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 243
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Strong silver grade of 231 g/t over 14.4 m.
Positive factors
- Strong silver grade
- Significant width
Negative factors
- True width unknown
Evidence · table
“231”
Context: 14.40
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · silverGrade: 425Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 425
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
- Intercept Depth
- 174.15 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-35:174.15-175
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 447
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver sub-interval of 425 g/t over 0.85 m.
Positive factors
- High-grade silver sub-interval
Negative factors
- True width unknown
- Narrow intercept
Evidence · table
“425”
Context: 0.85
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · silverGrade: 1261Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1261
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
- Intercept Depth
- 179.5 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-35:179.5-180.75
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1217
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Exceptional silver grade of 1,261 g/t over 1.25 m, indicating a bonanza sub-interval.
Positive factors
- Exceptional silver grade
Negative factors
- True width unknown
- Narrow intercept
Evidence · table
“1261”
Context: 1.25
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · silverGrade: 55Grade Unit: g/tIntercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
- Intercept Depth
- 189.8 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-35:189.8-196.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 73
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Weak silver grade of 55 g/t over 6.35 m.
Positive factors
- Moderate width
Negative factors
- True width unknown
- Weak silver grade
Evidence · table
“55”
Context: 6.35
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · silverGrade: 642Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 642
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
- Intercept Depth
- 191.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-35:191.4-192.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 742
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver sub-interval of 642 g/t over 0.8 m, with high lead and zinc grades.
Positive factors
- High-grade silver sub-interval
- High lead and zinc grades
Negative factors
- True width unknown
- Narrow intercept
Evidence · table
“642”
Context: 0.80
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-36Haldane · silverGrade: 228Grade Unit: g/tIntercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 228
- Grade Unit
- g/t
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
- Intercept Depth
- 161 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-36:161-164.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 232
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Strong silver grade of 228 g/t over 3.15 m.
Positive factors
- Strong silver grade
- Moderate width
Negative factors
- True width unknown
Evidence · table
“228”
Context: 3.15
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-36Haldane · silverGrade: 428Grade Unit: g/tIntercept: 9.1 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 428
- Grade Unit
- g/t
- Intercept
- 9.1 m
- From
- 182.4 m
- To
- 191.5 m
- Intercept Depth
- 182.4 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-36:182.4-191.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 557
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver intercept of 428 g/t over 9.1 m.
Positive factors
- High-grade silver intercept
- Good width
Negative factors
- True width unknown
Evidence · table
“428”
Context: 9.10
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-36Haldane · silverGrade: 1069Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1069
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
- Intercept Depth
- 188 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-36:188-190.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 1335
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Exceptional silver grade of 1,069 g/t over 2.8 m, with high gold and lead grades, indicating a bonanza sub-interval.
Positive factors
- Exceptional silver grade
- High gold and lead grades
Negative factors
- True width unknown
Evidence · table
“1069”
Context: 2.80
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-38Haldane · silverGrade: 406Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 406
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
- Intercept Depth
- 177 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-38:177-178.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 436
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver intercept of 406 g/t over 1.5 m.
Positive factors
- High-grade silver intercept
- Good lead grade
Negative factors
- True width unknown
- Narrow intercept
Evidence · table
“406”
Context: 1.50
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-38Haldane · silverGrade: 71Grade Unit: g/tIntercept: 22 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 71
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 196.3 m
- To
- 218.3 m
- Intercept Depth
- 196.3 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-38:196.3-218.3
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 114
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Weak silver grade of 71 g/t over a significant width of 22 m.
Positive factors
- Significant intercept width
Negative factors
- True width unknown
- Weak silver grade
Evidence · table
“71”
Context: 22.00
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-38Haldane · silverGrade: 140Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 140
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
- Intercept Depth
- 198 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-38:198-207.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 227
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Moderate silver grade of 140 g/t over 9.5 m.
Positive factors
- Moderate silver grade
- Good width
Negative factors
- True width unknown
Evidence · table
“140”
Context: 9.50
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-38Haldane · silverGrade: 437Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 437
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
- Intercept Depth
- 203.6 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- HLD25-38:203.6-205.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Metal Eq. Grade
- 740
- Metal Eq. Unit
- g/t Silver Eq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver sub-interval of 437 g/t over 1.9 m, with very high lead and zinc grades.
Positive factors
- High-grade silver sub-interval
- Very high lead and zinc grades
Negative factors
- True width unknown
- Narrow intercept
Evidence · table
“437”
Context: 1.90
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K665269Veronica · silverGrade: 2860Grade Unit: g/tIntercept: 0.15 mView all detailsHide details
Identity
- Hole ID
- K665269
- Project
- Veronica
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 2860
- Grade Unit
- g/t
- Intercept
- 0.15 m
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Exceptional silver grade from a float sample, representing a new discovery at the Veronica project.
Positive factors
- Extremely high-grade silver
- First discovery of silver-bearing mineralization at Veronica
- Polymetallic nature
Negative factors
- Float sample, not in-situ
- Limited width
Evidence · text
“2,860 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
K665270Veronica · silverGrade: 213Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- K665270
- Project
- Veronica
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 213
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: High-grade silver from a float sample, confirming new mineralization at Veronica.
Positive factors
- High-grade silver from float sample
- New discovery
Negative factors
- Float sample, not in-situ
Evidence · text
“213 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E812425Veronica · silverGrade: 33.17Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E812425
- Project
- Veronica
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 33.17
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Silver mineralization confirmed in outcrop at Veronica, indicating in-situ potential.
Positive factors
- Silver mineralization in outcrop
- New discovery
Negative factors
- Grab sample, not representative of width
Evidence · text
“33.17 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
E82424Veronica · silverGrade: 17.15Grade Unit: g/tView all detailsHide details
Identity
- Hole ID
- E82424
- Project
- Veronica
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 17.15
- Grade Unit
- g/t
Classification
- Sample Type
- surface
QA/QC
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Further silver mineralization confirmed in outcrop at Veronica.
Positive factors
- Silver mineralization in outcrop
- New discovery
Negative factors
- Grab sample, not representative of width
Evidence · text
“17.15 g/t Ag”
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-31Haldane · goldGrade: 1.39Grade Unit: g/tIntercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.39
- Grade Unit
- g/t
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
- Intercept Depth
- 249.9 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:249.9-263.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.39 g/t gold is weak against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 18.3 g/t·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.39”
Context: HLD25-31
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-31Haldane · leadGrade: 2.54Grade Unit: %Intercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 2.54
- Grade Unit
- %
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
- Intercept Depth
- 249.9 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:249.9-263.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.54 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 33.4 %·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.54”
Context: HLD25-31
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-31Haldane · zincGrade: 0.98Grade Unit: %Intercept: 13.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-31
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 13.15 m
- From
- 249.9 m
- To
- 263.05 m
- Intercept Depth
- 249.9 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-31:249.9-263.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.98 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 12.9 %·m is below.
Negative factors
- 0.98 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.98”
Context: HLD25-31
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 2014Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 2014
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
- Intercept Depth
- 251.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2014 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 6444.8 g/t·m is strong (grade alone is exceptional; the better of the two is used).
Positive factors
- 2014 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2014”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 1.72Grade Unit: g/tIntercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.72
- Grade Unit
- g/t
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
- Intercept Depth
- 251.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.72 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 5.5 g/t·m is below.
Negative factors
- 1.72 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.72”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 4.73Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 4.73
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
- Intercept Depth
- 251.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.73 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 15.1 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.73”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 1.1Grade Unit: %Intercept: 3.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.1
- Grade Unit
- %
- Intercept
- 3.2 m
- From
- 251.8 m
- To
- 255 m
- Intercept Depth
- 251.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:251.8-255
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 3.5 %·m is below.
Negative factors
- 1.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.10”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 1112Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1112
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
- Intercept Depth
- 256.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1112 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 1390.0 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1112 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1112”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 4.61Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 4.61
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
- Intercept Depth
- 256.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.61 g/t gold is moderate against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 5.8 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.61”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 7.11Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 7.11
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
- Intercept Depth
- 256.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 7.11 % lead is strong against the default band [10, 6, 3, 1] %. Grade×width 8.9 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 7.11 % lead is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“7.11”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 1.51Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 256.1 m
- To
- 257.35 m
- Intercept Depth
- 256.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:256.1-257.35
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.51 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 1.51 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.51”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-32Haldane · goldGrade: 0.23Grade Unit: g/tIntercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
- Intercept Depth
- 153 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:153-175.65
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 5.2 g/t·m is below.
Negative factors
- 0.23 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: HLD25-32
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-32Haldane · leadGrade: 0.75Grade Unit: %Intercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
- Intercept Depth
- 153 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:153-175.65
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.75 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 17.0 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.75”
Context: HLD25-32
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-32Haldane · zincGrade: 0.8Grade Unit: %Intercept: 22.65 mView all detailsHide details
Identity
- Hole ID
- HLD25-32
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 22.65 m
- From
- 153 m
- To
- 175.65 m
- Intercept Depth
- 153 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-32:153-175.65
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 18.1 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.80”
Context: HLD25-32
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 326Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 326
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
- Intercept Depth
- 165.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 326 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 2119.0 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 326 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“326”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 0.19Grade Unit: g/tIntercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
- Intercept Depth
- 165.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.2 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 0.81Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.81
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
- Intercept Depth
- 165.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.81 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 5.3 %·m is below.
Negative factors
- 0.81 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.81”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 1.3Grade Unit: %Intercept: 6.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 6.5 m
- From
- 165.1 m
- To
- 171.6 m
- Intercept Depth
- 165.1 m
Classification
- Sample Type
- drill
- Group ID
- incl:165.1-171.6
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.3 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 8.5 %·m is below.
Negative factors
- 1.3 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.30”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
a nd inclHaldane · silverGrade: 1438Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1438
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Intercept Depth
- 169 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1438 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 1150.4 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1438 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1438”
Context: a nd incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
a nd inclHaldane · goldGrade: 0.51Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Intercept Depth
- 169 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.51 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.51 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.51”
Context: a nd incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
a nd inclHaldane · leadGrade: 2.78Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 2.78
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Intercept Depth
- 169 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.78 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 2.2 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.78”
Context: a nd incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
a nd inclHaldane · zincGrade: 1.6Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- a nd incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.6
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 169 m
- To
- 169.8 m
- Intercept Depth
- 169 m
Classification
- Sample Type
- drill
- Group ID
- a nd incl:169-169.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.6 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.3 %·m is below.
Negative factors
- 1.6 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.60”
Context: a nd incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-33Haldane · goldGrade: 0.11Grade Unit: g/tIntercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
- Intercept Depth
- 193.49 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.11 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.11 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.11”
Context: HLD25-33
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-33Haldane · leadGrade: 1.33Grade Unit: %Intercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.33
- Grade Unit
- %
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
- Intercept Depth
- 193.49 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.33 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 7.4 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.33”
Context: HLD25-33
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-33Haldane · zincGrade: 1.96Grade Unit: %Intercept: 5.56 mView all detailsHide details
Identity
- Hole ID
- HLD25-33
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.96
- Grade Unit
- %
- Intercept
- 5.56 m
- From
- 193.49 m
- To
- 199.05 m
- Intercept Depth
- 193.49 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-33:193.49-199.05
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.96 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 10.9 %·m is below.
Negative factors
- 1.96 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.96”
Context: HLD25-33
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 311Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 311
- Grade Unit
- g/t
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
- Intercept Depth
- 195.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 311 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 762.0 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 311 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“311”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 0.17Grade Unit: g/tIntercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
- Intercept Depth
- 195.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.17 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.17 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.17”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 1.51Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.51
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
- Intercept Depth
- 195.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.51 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 3.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.51”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 3.27Grade Unit: %Intercept: 2.45 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 3.27
- Grade Unit
- %
- Intercept
- 2.45 m
- From
- 195.35 m
- To
- 197.8 m
- Intercept Depth
- 195.35 m
Classification
- Sample Type
- drill
- Group ID
- incl:195.35-197.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.27 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 8.0 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.27”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-34Haldane · goldGrade: 0.15Grade Unit: g/tIntercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
- Intercept Depth
- 157.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:157.5-171.1
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.0 g/t·m is below.
Negative factors
- 0.15 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: HLD25-34
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-34Haldane · leadGrade: 2.34Grade Unit: %Intercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 2.34
- Grade Unit
- %
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
- Intercept Depth
- 157.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:157.5-171.1
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.34 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 31.8 %·m is moderate (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.34”
Context: HLD25-34
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-34Haldane · zincGrade: 1.24Grade Unit: %Intercept: 13.6 mView all detailsHide details
Identity
- Hole ID
- HLD25-34
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.24
- Grade Unit
- %
- Intercept
- 13.6 m
- From
- 157.5 m
- To
- 171.1 m
- Intercept Depth
- 157.5 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-34:157.5-171.1
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.24 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 16.9 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.24”
Context: HLD25-34
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 196Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 196
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
- Intercept Depth
- 159 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 196 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1803.2 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“196”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 0.19Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
- Intercept Depth
- 159 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.19 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 1.7 g/t·m is below.
Negative factors
- 0.19 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.19”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 3.22Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 3.22
- Grade Unit
- %
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
- Intercept Depth
- 159 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.22 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 29.6 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.22”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 0.76Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.76
- Grade Unit
- %
- Intercept
- 9.2 m
- From
- 159 m
- To
- 168.2 m
- Intercept Depth
- 159 m
Classification
- Sample Type
- drill
- Group ID
- incl:159-168.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.76 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 7.0 %·m is below.
Negative factors
- 0.76 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.76”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · silverGrade: 467Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 467
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
- Intercept Depth
- 165.8 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 467 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 560.4 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 467 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“467”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · goldGrade: 0.21Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
- Intercept Depth
- 165.8 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.21 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · leadGrade: 12.07Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 12.07
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
- Intercept Depth
- 165.8 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 12.07 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 14.5 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 12.07 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.07”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · zincGrade: 1.34Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 165.8 m
- To
- 167 m
- Intercept Depth
- 165.8 m
Classification
- Sample Type
- drill
- Group ID
- and incl:165.8-167
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.6 %·m is below.
Negative factors
- 1.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · goldGrade: 0.18Grade Unit: g/tIntercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
- Intercept Depth
- 170.6 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.6-198.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 5.0 g/t·m is below.
Negative factors
- 0.18 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: HLD25-35
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · leadGrade: 0.47Grade Unit: %Intercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
- Intercept Depth
- 170.6 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.6-198.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.47 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 13.1 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.47”
Context: HLD25-35
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-35Haldane · zincGrade: 0.75Grade Unit: %Intercept: 27.9 mView all detailsHide details
Identity
- Hole ID
- HLD25-35
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 27.9 m
- From
- 170.6 m
- To
- 198.5 m
- Intercept Depth
- 170.6 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-35:170.6-198.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.75 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 20.9 %·m is weak (grade alone is below; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.75”
Context: HLD25-35
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 231Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 231
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
- Intercept Depth
- 170.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 231 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 3326.4 g/t·m is strong.
Positive factors
- 231 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“231”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 0.24Grade Unit: g/tIntercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
- Intercept Depth
- 170.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.24 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 3.5 g/t·m is below.
Negative factors
- 0.24 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.24”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 0.54Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
- Intercept Depth
- 170.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.54 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 7.8 %·m is below.
Negative factors
- 0.54 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.54”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 0.39Grade Unit: %Intercept: 14.4 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.39
- Grade Unit
- %
- Intercept
- 14.4 m
- From
- 170.6 m
- To
- 185 m
- Intercept Depth
- 170.6 m
Classification
- Sample Type
- drill
- Group ID
- incl:170.6-185
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.39 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.6 %·m is below.
Negative factors
- 0.39 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.39”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · silverGrade: 425Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 425
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
- Intercept Depth
- 174.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 425 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 361.3 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 425 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“425”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · goldGrade: 0.15Grade Unit: g/tIntercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
- Intercept Depth
- 174.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.15 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · leadGrade: 2.24Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 2.24
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
- Intercept Depth
- 174.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 2.24 % lead is weak against the default band [10, 6, 3, 1] %. Grade×width 1.9 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.24”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · zincGrade: 0.55Grade Unit: %Intercept: 0.85 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.55
- Grade Unit
- %
- Intercept
- 0.85 m
- From
- 174.15 m
- To
- 175 m
- Intercept Depth
- 174.15 m
Classification
- Sample Type
- drill
- Group ID
- and incl:174.15-175
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.55 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.55 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.55”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · silverGrade: 1261Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1261
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
- Intercept Depth
- 179.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1261 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 1576.3 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1261 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1261”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · goldGrade: 0.74Grade Unit: g/tIntercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
- Intercept Depth
- 179.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.74 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.9 g/t·m is below.
Negative factors
- 0.74 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.74”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · leadGrade: 0.35Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.35
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
- Intercept Depth
- 179.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.35 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · zincGrade: 0.41Grade Unit: %Intercept: 1.25 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.41
- Grade Unit
- %
- Intercept
- 1.25 m
- From
- 179.5 m
- To
- 180.75 m
- Intercept Depth
- 179.5 m
Classification
- Sample Type
- drill
- Group ID
- and incl:179.5-180.75
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.41 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.5 %·m is below.
Negative factors
- 0.41 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.41”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 55Grade Unit: g/tIntercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
- Intercept Depth
- 189.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 55 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 349.3 g/t·m is weak.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“55”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 0.08Grade Unit: g/tIntercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
- Intercept Depth
- 189.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.08 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.08 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.08”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 0.27Grade Unit: %Intercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
- Intercept Depth
- 189.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.7 %·m is below.
Negative factors
- 0.27 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 0.8Grade Unit: %Intercept: 6.35 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.8
- Grade Unit
- %
- Intercept
- 6.35 m
- From
- 189.8 m
- To
- 196.15 m
- Intercept Depth
- 189.8 m
Classification
- Sample Type
- drill
- Group ID
- incl:189.8-196.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.8 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 5.1 %·m is below.
Negative factors
- 0.8 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.80”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · silverGrade: 642Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 642
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
- Intercept Depth
- 191.4 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 642 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 513.6 g/t·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 642 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“642”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · goldGrade: 0.3Grade Unit: g/tIntercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
- Intercept Depth
- 191.4 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.3 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.3 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.30”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · leadGrade: 3.38Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 3.38
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
- Intercept Depth
- 191.4 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.38 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 2.7 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.38”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · zincGrade: 4.57Grade Unit: %Intercept: 0.8 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 4.57
- Grade Unit
- %
- Intercept
- 0.8 m
- From
- 191.4 m
- To
- 192.2 m
- Intercept Depth
- 191.4 m
Classification
- Sample Type
- drill
- Group ID
- and incl:191.4-192.2
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.57 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 3.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.57”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-36Haldane · goldGrade: 0.1Grade Unit: g/tIntercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
- Intercept Depth
- 161 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:161-164.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.1 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: HLD25-36
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-36Haldane · leadGrade: 0.48Grade Unit: %Intercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.48
- Grade Unit
- %
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
- Intercept Depth
- 161 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:161-164.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.48 % lead is below against the default band [10, 6, 3, 1] %. Grade×width 1.5 %·m is below.
Negative factors
- 0.48 % lead is below the weak threshold (1 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.48”
Context: HLD25-36
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-36Haldane · zincGrade: 0.45Grade Unit: %Intercept: 3.15 mView all detailsHide details
Identity
- Hole ID
- HLD25-36
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.45
- Grade Unit
- %
- Intercept
- 3.15 m
- From
- 161 m
- To
- 164.15 m
- Intercept Depth
- 161 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-36:161-164.15
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.45 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.4 %·m is below.
Negative factors
- 0.45 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.45”
Context: HLD25-36
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 1069Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1069
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
- Intercept Depth
- 188 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1069 g/t silver is exceptional against the default band [500, 200, 100, 30] g/t. Grade×width 2993.2 g/t·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 1069 g/t silver is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1069”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 1.41Grade Unit: g/tIntercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.41
- Grade Unit
- g/t
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
- Intercept Depth
- 188 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.41 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 3.9 g/t·m is below.
Negative factors
- 1.41 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.41”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 12.6Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 12.6
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
- Intercept Depth
- 188 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 12.6 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 35.3 %·m is moderate (grade alone is exceptional; the better of the two is used).
Positive factors
- 12.6 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“12.60”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 3.02Grade Unit: %Intercept: 2.8 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 3.02
- Grade Unit
- %
- Intercept
- 2.8 m
- From
- 188 m
- To
- 190.8 m
- Intercept Depth
- 188 m
Classification
- Sample Type
- drill
- Group ID
- incl:188-190.8
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.02 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 8.5 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.02”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-38Haldane · goldGrade: 0.1Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
- Intercept Depth
- 177 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:177-178.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.1 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: HLD25-38
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-38Haldane · leadGrade: 3.13Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 3.13
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
- Intercept Depth
- 177 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:177-178.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.13 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 4.7 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.13”
Context: HLD25-38
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
HLD25-38Haldane · zincGrade: 0.18Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- HLD25-38
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 177 m
- To
- 178.5 m
- Intercept Depth
- 177 m
Classification
- Sample Type
- drill
- Group ID
- HLD25-38:177-178.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.18 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: HLD25-38
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · silverGrade: 140Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 140
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
- Intercept Depth
- 198 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 140 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 1330.0 g/t·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“140”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · goldGrade: 0.29Grade Unit: g/tIntercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
- Intercept Depth
- 198 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.29 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 2.8 g/t·m is below.
Negative factors
- 0.29 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.29”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · leadGrade: 3.44Grade Unit: %Intercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 3.44
- Grade Unit
- %
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
- Intercept Depth
- 198 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 3.44 % lead is moderate against the default band [10, 6, 3, 1] %. Grade×width 32.7 %·m is moderate.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.44”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
inclHaldane · zincGrade: 1.34Grade Unit: %Intercept: 9.5 mView all detailsHide details
Identity
- Hole ID
- incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 1.34
- Grade Unit
- %
- Intercept
- 9.5 m
- From
- 198 m
- To
- 207.5 m
- Intercept Depth
- 198 m
Classification
- Sample Type
- drill
- Group ID
- incl:198-207.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 12.7 %·m is below.
Negative factors
- 1.34 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · silverGrade: 437Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- silver
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 437
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
- Intercept Depth
- 203.6 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 437 g/t silver is strong against the default band [500, 200, 100, 30] g/t. Grade×width 830.3 g/t·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 437 g/t silver is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“437”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · goldGrade: 0.35Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- gold
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
- Intercept Depth
- 203.6 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 g/t gold is below against the underground mining band [15, 7, 4, 2.5] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.35 g/t gold is below the weak threshold (2.5 g/t) on the underground mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · leadGrade: 14.55Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- lead
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 14.55
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
- Intercept Depth
- 203.6 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 14.55 % lead is exceptional against the default band [10, 6, 3, 1] %. Grade×width 27.6 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 14.55 % lead is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“14.55”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
and inclHaldane · zincGrade: 4.04Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- and incl
- Project
- Haldane
- Commodity
- zinc
- Region
- canada_yt
- Reported Region
- canada_yt
- Ticker
- SNAG
Geometry
- Grade
- 4.04
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 203.6 m
- To
- 205.5 m
- Intercept Depth
- 203.6 m
Classification
- Sample Type
- drill
- Group ID
- and incl:203.6-205.5
- Mining Method
- underground
QA/QC
- QP Signed
- Yes
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-19T00:00:00.000Z
Reasoning: Expanded from assay table. 4.04 % zinc is weak against the default band [18, 10, 5, 2] %. Grade×width 7.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.04”
Context: and incl
Tags used in scoring
No QA/QC Disclosurenegative
Release does not disclose QA/QC — lab certification, CP/QP sign-off and assay protocols cannot be checked from this document.
Why it applies: qaqc_disclosed is not true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.