Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada
Original announcement by tmx on
- Company
- Silver47 Exploration
- Ticker
- AGA
- Exchange
- TSX
- Region
- Nevada
- Primary commodity
- Silver
- Secondary commodities
- Gold
- Document categories
- Drill results, Resource update, Metallurgy
- Extracted
- 2026-09-13 10:38:49 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Silver47 Exploration announced results from a 21-hole auger drill program at its Hughes Project in Nevada, confirming consistent silver-gold mineralization in the Belmont tailings. All holes returned mineralization from surface to base, supporting an inferred mineral resource of 2.74 Moz AgEq (1.8 Moz silver and 11 koz gold) within 1.26 Mt. The company is conducting metallurgical testwork to evaluate recovery and process parameters for potential low-cost domestic silver production.
Reasoning: The auger program successfully confirmed consistent silver-gold mineralization in the Belmont tailings, supporting a significant inferred resource. The ongoing metallurgical testwork is a positive step towards economic evaluation, despite the resource being entirely in the inferred category and having a slightly stale effective date.
Positive factors
- Consistent silver-gold mineralization confirmed in all 21 auger holes.
- Significant inferred mineral resource of 2.74 Moz AgEq at surface.
- Excellent project location on private land, adjacent to a highway with established infrastructure.
- Metallurgical testwork is underway to evaluate recovery and process parameters.
- Qualified Person (QP) has reviewed and approved the technical content.
Negative factors
- The resource is entirely in the Inferred category, which has the lowest confidence level.
- The metallurgical testwork is ongoing, and results are not yet available to confirm economic viability.
- The resource estimate's effective date is October 2024, making it somewhat stale, though confirmed by recent drilling.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 44
Classification and evidence
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: The document states 'an inferred mineral resource of 1.8 Moz silver and 11 koz gold'.
Evidence · text
“an inferred mineral resource of 1.8 Moz silver and 11 koz gold”
All Inferrednegative
M&I share below the weak bound — very early stage, no engineering confidence.
Why it applies: The resource is described as 'an inferred mineral resource', with no mention of Measured or Indicated categories.
Evidence · text
“an inferred mineral resource”
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: The resource estimate is from a '43-101 Technical Report' and the QP is defined by 'National Instrument 43-101'.
Evidence · text
“Technical Report and Mineral Resource Estimate for the Hughes Silver-Gold Property, Tonopah District, Nye County, Nevada. 43-101 Technical Report”
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Galen McNamara, P. Geo., the CEO of the Company, is stated as a 'qualified person' who reviewed and approved the technical content.
Evidence · text
“Galen McNamara, P. Geo., the CEO of the Company and a "qualified person" as defined by National Instrument 43-101- Standards of Disclosure for Mineral Projects”
Stale Estimatenegative
Effective date is >2 years old — data currency concern, may not reflect current geological understanding.
Why it applies: The resource estimate has an 'effective date of October 22, 2024', while the announcement is in July 2026, making it over a year old.
Evidence · text
“effective date of October 22, 2024”
Resource Updateneutral
Revised estimate for an existing resource — compare to prior to assess progress.
Why it applies: The document 'Confirms 2.74 Moz Silver Equivalent Tailings Resource', indicating a re-evaluation or confirmation of an existing resource.
Evidence · text
“Confirms 2.74 Moz Silver Equivalent Tailings Resource”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The document includes an 'Analytical and QA/QC Procedures' section detailing sample preparation, analysis methods, and the use of certified standards.
Evidence · text
“Analytical and QA/QC Procedures Samples were sent to Florin Analytical Laboratories (" Florin ") in Reno, Nevada (part of Kappes, Cassiday & Associates (KCA) laboratory facilities) for preparation and analysis. Florin is independent of the Company. Samples were dried, crushed and pulverized using standard preparation procedures. Samples were analysed for gold via a 30 gram fire assays with an AAS (Atomic Absorption Spectroscopy) finish (Lab Code 4008). Samples were analysed for silver following a 4-acid digestion with an AAS (Atomic Absorption Spectroscopy) finish (Lab Code 7048). Florin inserts certified standards into the analytical stream. The standards used by Florin are considered appropriate and the results are acceptable.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: The auger holes were 'collared within one meter of visible previous holes from 2019-2020 programs for comparative accuracy', suggesting infill or confirmation drilling.
Evidence · text
“many collared within one meter of visible previous holes from 2019-2020 programs for comparative accuracy”
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The table reports 'Total Depth (m)' for each auger hole, which represents the downhole intercept length, but does not explicitly state true width.
Evidence · table
“Total Depth (m)”
Context: Auger Hole
Bench Scale Onlynegative
Only preliminary bench tests completed — no locked-cycle or pilot work.
Why it applies: The metallurgical testwork described includes 'agitated cyanide leach tests', 'regrinding', and 'CIL testing', which are typically bench-scale tests.
Evidence · text
“agitated cyanide leach tests at current grind size, regrinding to two finer sizes with kinetic sampling, and CIL testing at the optimal grind”
Mill Routeneutral
Processing via mill or concentrator (CIL, CIP, tank leach, flotation).
Why it applies: the document describes a mill_cil route ("CIL")
Extracted facts
Stored fact records: 44. Some facts used in scoring do not have a stored record.
Drill Results (42)
BH26-01Hughes · silverGrade: 29Grade Unit: g/tIntercept: 2.15 mView all detailsHide details
Identity
- Hole ID
- BH26-01
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 29
- Grade Unit
- g/t
- Intercept
- 2.15 m
- From
- 0 m
- To
- 2.15 m
- Hole Depth
- 2.15 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-01:0-2.15
- Mining Method
- open_pit
Location
- Easting
- 481398
- Northing
- 4213649
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 49
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“29”
Context: BH26-01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-01Hughes · goldGrade: 0.22Grade Unit: g/tIntercept: 2.15 mView all detailsHide details
Identity
- Hole ID
- BH26-01
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 2.15 m
- From
- 0 m
- To
- 2.15 m
- Hole Depth
- 2.15 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-01:0-2.15
- Mining Method
- open_pit
Location
- Easting
- 481398
- Northing
- 4213649
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 49
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.22”
Context: BH26-01
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-02Hughes · silverGrade: 36Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- BH26-02
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 36
- Grade Unit
- g/t
- Intercept
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 1.65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-02:0-1.65
- Mining Method
- open_pit
Location
- Easting
- 481445
- Northing
- 4213841
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 58
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“36”
Context: BH26-02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-02Hughes · goldGrade: 0.24Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- BH26-02
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 1.65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-02:0-1.65
- Mining Method
- open_pit
Location
- Easting
- 481445
- Northing
- 4213841
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 58
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.24”
Context: BH26-02
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-03Hughes · silverGrade: 33Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BH26-03
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 33
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 2 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-03:0-2
- Mining Method
- open_pit
Location
- Easting
- 481577
- Northing
- 4213892
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 64
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“33”
Context: BH26-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-03Hughes · goldGrade: 0.34Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BH26-03
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 2 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-03:0-2
- Mining Method
- open_pit
Location
- Easting
- 481577
- Northing
- 4213892
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 64
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.34”
Context: BH26-03
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-04Hughes · silverGrade: 24Grade Unit: g/tIntercept: 1.43 mView all detailsHide details
Identity
- Hole ID
- BH26-04
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 24
- Grade Unit
- g/t
- Intercept
- 1.43 m
- From
- 0 m
- To
- 1.43 m
- Hole Depth
- 1.43 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-04:0-1.43
- Mining Method
- open_pit
Location
- Easting
- 481691
- Northing
- 4213980
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 53
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“24”
Context: BH26-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-04Hughes · goldGrade: 0.32Grade Unit: g/tIntercept: 1.43 mView all detailsHide details
Identity
- Hole ID
- BH26-04
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 1.43 m
- From
- 0 m
- To
- 1.43 m
- Hole Depth
- 1.43 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-04:0-1.43
- Mining Method
- open_pit
Location
- Easting
- 481691
- Northing
- 4213980
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 53
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.32”
Context: BH26-04
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-05Hughes · silverGrade: 28Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- BH26-05
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 28
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 0 m
- To
- 1.05 m
- Hole Depth
- 1.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-05:0-1.05
- Mining Method
- open_pit
Location
- Easting
- 481820
- Northing
- 4214029
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 60
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“28”
Context: BH26-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-05Hughes · goldGrade: 0.35Grade Unit: g/tIntercept: 1.05 mView all detailsHide details
Identity
- Hole ID
- BH26-05
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 1.05 m
- From
- 0 m
- To
- 1.05 m
- Hole Depth
- 1.05 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-05:0-1.05
- Mining Method
- open_pit
Location
- Easting
- 481820
- Northing
- 4214029
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 60
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.35”
Context: BH26-05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-06Hughes · silverGrade: 24Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- BH26-06
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 24
- Grade Unit
- g/t
- Intercept
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 1.65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-06:0-1.65
- Mining Method
- open_pit
Location
- Easting
- 481860
- Northing
- 4214140
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 58
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“24”
Context: BH26-06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-06Hughes · goldGrade: 0.38Grade Unit: g/tIntercept: 1.65 mView all detailsHide details
Identity
- Hole ID
- BH26-06
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 1.65 m
- From
- 0 m
- To
- 1.65 m
- Hole Depth
- 1.65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-06:0-1.65
- Mining Method
- open_pit
Location
- Easting
- 481860
- Northing
- 4214140
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 58
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.38”
Context: BH26-06
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-07Hughes · silverGrade: 39Grade Unit: g/tIntercept: 1.97 mView all detailsHide details
Identity
- Hole ID
- BH26-07
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 39
- Grade Unit
- g/t
- Intercept
- 1.97 m
- From
- 0 m
- To
- 1.97 m
- Hole Depth
- 1.97 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-07:0-1.97
- Mining Method
- open_pit
Location
- Easting
- 482509
- Northing
- 4213983
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 71
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“39”
Context: BH26-07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-07Hughes · goldGrade: 0.36Grade Unit: g/tIntercept: 1.97 mView all detailsHide details
Identity
- Hole ID
- BH26-07
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 1.97 m
- From
- 0 m
- To
- 1.97 m
- Hole Depth
- 1.97 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-07:0-1.97
- Mining Method
- open_pit
Location
- Easting
- 482509
- Northing
- 4213983
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 71
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.36”
Context: BH26-07
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-08Hughes · silverGrade: 45Grade Unit: g/tIntercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- BH26-08
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 45
- Grade Unit
- g/t
- Intercept
- 1.85 m
- From
- 0 m
- To
- 1.85 m
- Hole Depth
- 1.85 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-08:0-1.85
- Mining Method
- open_pit
Location
- Easting
- 482265
- Northing
- 4214070
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 73
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“45”
Context: BH26-08
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-08Hughes · goldGrade: 0.31Grade Unit: g/tIntercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- BH26-08
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 1.85 m
- From
- 0 m
- To
- 1.85 m
- Hole Depth
- 1.85 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-08:0-1.85
- Mining Method
- open_pit
Location
- Easting
- 482265
- Northing
- 4214070
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 73
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.31”
Context: BH26-08
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-09Hughes · silverGrade: 58Grade Unit: g/tIntercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- BH26-09
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 58
- Grade Unit
- g/t
- Intercept
- 2.85 m
- From
- 0 m
- To
- 2.85 m
- Hole Depth
- 2.85 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-09:0-2.85
- Mining Method
- open_pit
Location
- Easting
- 482403
- Northing
- 4213979
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 86
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“58”
Context: BH26-09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-09Hughes · goldGrade: 0.31Grade Unit: g/tIntercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- BH26-09
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 2.85 m
- From
- 0 m
- To
- 2.85 m
- Hole Depth
- 2.85 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-09:0-2.85
- Mining Method
- open_pit
Location
- Easting
- 482403
- Northing
- 4213979
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 86
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.31”
Context: BH26-09
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-10Hughes · silverGrade: 30Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- BH26-10
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 30
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 0 m
- To
- 4.5 m
- Hole Depth
- 4.5 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-10:0-4.5
- Mining Method
- open_pit
Location
- Easting
- 482318
- Northing
- 4213984
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 52
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“30”
Context: BH26-10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-10Hughes · goldGrade: 0.24Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- BH26-10
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 0 m
- To
- 4.5 m
- Hole Depth
- 4.5 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-10:0-4.5
- Mining Method
- open_pit
Location
- Easting
- 482318
- Northing
- 4213984
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 52
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.24”
Context: BH26-10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-11Hughes · silverGrade: 55Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- BH26-11
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 55
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 0 m
- To
- 5.5 m
- Hole Depth
- 5.5 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-11:0-5.5
- Mining Method
- open_pit
Location
- Easting
- 482316
- Northing
- 4213891
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 85
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“55”
Context: BH26-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-11Hughes · goldGrade: 0.33Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- BH26-11
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 0 m
- To
- 5.5 m
- Hole Depth
- 5.5 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-11:0-5.5
- Mining Method
- open_pit
Location
- Easting
- 482316
- Northing
- 4213891
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 85
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.33”
Context: BH26-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-12Hughes · silverGrade: 38Grade Unit: g/tIntercept: 5.75 mView all detailsHide details
Identity
- Hole ID
- BH26-12
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 38
- Grade Unit
- g/t
- Intercept
- 5.75 m
- From
- 0 m
- To
- 5.75 m
- Hole Depth
- 5.75 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-12:0-5.75
- Mining Method
- open_pit
Location
- Easting
- 482185
- Northing
- 4213926
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 62
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“38”
Context: BH26-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-12Hughes · goldGrade: 0.27Grade Unit: g/tIntercept: 5.75 mView all detailsHide details
Identity
- Hole ID
- BH26-12
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.27
- Grade Unit
- g/t
- Intercept
- 5.75 m
- From
- 0 m
- To
- 5.75 m
- Hole Depth
- 5.75 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-12:0-5.75
- Mining Method
- open_pit
Location
- Easting
- 482185
- Northing
- 4213926
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 62
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.27”
Context: BH26-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-13Hughes · silverGrade: 46Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- BH26-13
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 46
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 0 m
- To
- 4.5 m
- Hole Depth
- 4.5 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-13:0-4.5
- Mining Method
- open_pit
Location
- Easting
- 482033
- Northing
- 4213988
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 74
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“46”
Context: BH26-13
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-13Hughes · goldGrade: 0.31Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- BH26-13
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 0 m
- To
- 4.5 m
- Hole Depth
- 4.5 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-13:0-4.5
- Mining Method
- open_pit
Location
- Easting
- 482033
- Northing
- 4213988
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 74
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.31”
Context: BH26-13
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-14Hughes · silverGrade: 39Grade Unit: g/tIntercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- BH26-14
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 39
- Grade Unit
- g/t
- Intercept
- 3.7 m
- From
- 0 m
- To
- 3.7 m
- Hole Depth
- 3.7 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-14:0-3.7
- Mining Method
- open_pit
Location
- Easting
- 482041
- Northing
- 4213801
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 62
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“39”
Context: BH26-14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-14Hughes · goldGrade: 0.25Grade Unit: g/tIntercept: 3.7 mView all detailsHide details
Identity
- Hole ID
- BH26-14
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 3.7 m
- From
- 0 m
- To
- 3.7 m
- Hole Depth
- 3.7 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-14:0-3.7
- Mining Method
- open_pit
Location
- Easting
- 482041
- Northing
- 4213801
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 62
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.25”
Context: BH26-14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-15Hughes · silverGrade: 48Grade Unit: g/tIntercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- BH26-15
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 48
- Grade Unit
- g/t
- Intercept
- 5.1 m
- From
- 0 m
- To
- 5.1 m
- Hole Depth
- 5.1 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-15:0-5.1
- Mining Method
- open_pit
Location
- Easting
- 481944
- Northing
- 4213802
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 71
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“48”
Context: BH26-15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-15Hughes · goldGrade: 0.25Grade Unit: g/tIntercept: 5.1 mView all detailsHide details
Identity
- Hole ID
- BH26-15
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 5.1 m
- From
- 0 m
- To
- 5.1 m
- Hole Depth
- 5.1 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-15:0-5.1
- Mining Method
- open_pit
Location
- Easting
- 481944
- Northing
- 4213802
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 71
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.25”
Context: BH26-15
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-16Hughes · silverGrade: 30Grade Unit: g/tIntercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- BH26-16
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 30
- Grade Unit
- g/t
- Intercept
- 3.75 m
- From
- 0 m
- To
- 3.75 m
- Hole Depth
- 3.75 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-16:0-3.75
- Mining Method
- open_pit
Location
- Easting
- 481944
- Northing
- 4213985
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 53
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“30”
Context: BH26-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-16Hughes · goldGrade: 0.25Grade Unit: g/tIntercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- BH26-16
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 3.75 m
- From
- 0 m
- To
- 3.75 m
- Hole Depth
- 3.75 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-16:0-3.75
- Mining Method
- open_pit
Location
- Easting
- 481944
- Northing
- 4213985
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 53
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.25”
Context: BH26-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-17Hughes · silverGrade: 28Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BH26-17
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 28
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 2 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-17:0-2
- Mining Method
- open_pit
Location
- Easting
- 481854
- Northing
- 4213893
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 49
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“28”
Context: BH26-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-17Hughes · goldGrade: 0.23Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BH26-17
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.23
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 0 m
- To
- 2 m
- Hole Depth
- 2 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-17:0-2
- Mining Method
- open_pit
Location
- Easting
- 481854
- Northing
- 4213893
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 49
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.23”
Context: BH26-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-18Hughes · silverGrade: 34Grade Unit: g/tIntercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- BH26-18
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 34
- Grade Unit
- g/t
- Intercept
- 3.75 m
- From
- 0 m
- To
- 3.75 m
- Hole Depth
- 3.75 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-18:0-3.75
- Mining Method
- open_pit
Location
- Easting
- 481668
- Northing
- 4213801
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 64
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“34”
Context: BH26-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-18Hughes · goldGrade: 0.33Grade Unit: g/tIntercept: 3.75 mView all detailsHide details
Identity
- Hole ID
- BH26-18
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 3.75 m
- From
- 0 m
- To
- 3.75 m
- Hole Depth
- 3.75 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-18:0-3.75
- Mining Method
- open_pit
Location
- Easting
- 481668
- Northing
- 4213801
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 64
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.33”
Context: BH26-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-19Hughes · silverGrade: 43Grade Unit: g/tIntercept: 4.95 mView all detailsHide details
Identity
- Hole ID
- BH26-19
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 43
- Grade Unit
- g/t
- Intercept
- 4.95 m
- From
- 0 m
- To
- 4.95 m
- Hole Depth
- 4.95 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-19:0-4.95
- Mining Method
- open_pit
Location
- Easting
- 481670
- Northing
- 4213702
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 70
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“43”
Context: BH26-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-19Hughes · goldGrade: 0.29Grade Unit: g/tIntercept: 4.95 mView all detailsHide details
Identity
- Hole ID
- BH26-19
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.29
- Grade Unit
- g/t
- Intercept
- 4.95 m
- From
- 0 m
- To
- 4.95 m
- Hole Depth
- 4.95 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-19:0-4.95
- Mining Method
- open_pit
Location
- Easting
- 481670
- Northing
- 4213702
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 70
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.29”
Context: BH26-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-20Hughes · silverGrade: 36Grade Unit: g/tIntercept: 5.65 mView all detailsHide details
Identity
- Hole ID
- BH26-20
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 36
- Grade Unit
- g/t
- Intercept
- 5.65 m
- From
- 0 m
- To
- 5.65 m
- Hole Depth
- 5.65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-20:0-5.65
- Mining Method
- open_pit
Location
- Easting
- 481535
- Northing
- 4213751
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 61
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“36”
Context: BH26-20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-20Hughes · goldGrade: 0.28Grade Unit: g/tIntercept: 5.65 mView all detailsHide details
Identity
- Hole ID
- BH26-20
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 5.65 m
- From
- 0 m
- To
- 5.65 m
- Hole Depth
- 5.65 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-20:0-5.65
- Mining Method
- open_pit
Location
- Easting
- 481535
- Northing
- 4213751
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 61
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.28”
Context: BH26-20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-21Hughes · silverGrade: 28Grade Unit: g/tIntercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- BH26-21
- Project
- Hughes
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 28
- Grade Unit
- g/t
- Intercept
- 2.85 m
- From
- 0 m
- To
- 2.85 m
- Hole Depth
- 2.85 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-21:0-2.85
- Mining Method
- open_pit
Location
- Easting
- 481991
- Northing
- 4214116
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 61
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent silver mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for silver.
- Apparent width only, true width not explicitly stated.
Evidence · table
“28”
Context: BH26-21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
BH26-21Hughes · goldGrade: 0.37Grade Unit: g/tIntercept: 2.85 mView all detailsHide details
Identity
- Hole ID
- BH26-21
- Project
- Hughes
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- usa_nv
- Ticker
- AGA
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 2.85 m
- From
- 0 m
- To
- 2.85 m
- Hole Depth
- 2.85 m
- Intercept Depth
- 0 m
Classification
- Program
- exploration
- Sample Type
- drill
- Group ID
- BH26-21:0-2.85
- Mining Method
- open_pit
Location
- Easting
- 481991
- Northing
- 4214116
- CRS
- NAD27
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Florin Analytical Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards
Metal Equivalent
- Metal Eq. Grade
- 61
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: This auger hole confirms consistent gold mineralization from surface, contributing to the overall resource, with disclosed QA/QC procedures.
Positive factors
- Consistent mineralization from surface to base of tailings.
- QA/QC procedures disclosed, including certified standards.
Negative factors
- Grade is in the weak band for gold.
- Apparent width only, true width not explicitly stated.
Evidence · table
“0.37”
Context: BH26-21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "Silver47 Auger Program Confirms 2.74 Moz Silver Equivalent Tailings Resource at Surface, Hughes Project, Nevada Silver47"
Resource Estimates (2)
inferredHughes Project · silverTonnes: 1260000Grade: 44Grade Unit: g/tContained Metal: 1.8Contained Unit: mozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Hughes Project
- Commodity
- silver
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- AGA
Resource scope
- Estimate type
- resource
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Galen McNamara
- Resource group id
- resource:90689bff601855e58909
- Deposit or zone
- Belmont tailings
Resource Data
- Category
- inferred
- Tonnes
- 1260000
- Grade
- 44
- Grade Unit
- g/t
- Contained Metal
- 1.8
- Contained Unit
- moz
Prior Estimate
- Resource Date
- 2024-10-22
Metal Equivalent
- Metal Eq. Grade
- 68
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2024-10-22T00:00:00.000Z
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: The inferred silver resource of 1.8 Moz is significant for a tailings project and has been confirmed by recent drilling, though its inferred status and slightly stale effective date reduce overall confidence.
Positive factors
- Significant contained metal (1.8 Moz silver) for a tailings project.
- Resource is confirmed by recent auger drilling.
Negative factors
- Resource is entirely in the Inferred category, indicating lower confidence.
- Effective date of the resource is October 2024, making it somewhat stale.
Evidence · text
“an inferred mineral resource of 1.8 Moz silver and 11 koz gold (44 g/t Ag and 0.3 g/t Au, or 68 g/t AgEq*) within approximately 1.26 Mt”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
inferredHughes Project · goldTonnes: 1260000Grade: 0.3Grade Unit: g/tContained Metal: 11Contained Unit: kozHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Project
- Hughes Project
- Commodity
- gold
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- AGA
Resource scope
- Estimate type
- resource
- Reporting standards
- ni_43_101
- QP Signed
- Yes
- Qualified person names
- Galen McNamara
- Resource group id
- resource:90689bff601855e58909
- Deposit or zone
- Belmont tailings
Resource Data
- Category
- inferred
- Tonnes
- 1260000
- Grade
- 0.3
- Grade Unit
- g/t
- Contained Metal
- 11
- Contained Unit
- koz
Prior Estimate
- Resource Date
- 2024-10-22
Metal Equivalent
- Metal Eq. Grade
- 68
- Metal Eq. Unit
- g/t AgEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Historical
- Yes
- Historical Source Date
- 2024-10-22T00:00:00.000Z
Dates
- Event date
- 2026-07-21T00:00:00.000Z
Reasoning: The inferred gold resource contributes to the overall project economics and has been confirmed by recent drilling, though its inferred status and slightly stale effective date reduce overall confidence.
Positive factors
- Contained gold (11 koz) contributes to the overall silver equivalent resource.
- Resource is confirmed by recent auger drilling.
Negative factors
- Resource is entirely in the Inferred category, indicating lower confidence.
- Effective date of the resource is October 2024, making it somewhat stale.
Evidence · text
“an inferred mineral resource of 1.8 Moz silver and 11 koz gold (44 g/t Ag and 0.3 g/t Au, or 68 g/t AgEq*) within approximately 1.26 Mt”
Tags used in scoring
Inferred Resourcenegative
Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.
Why it applies: category is "inferred"
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
QP/CP Signedpositive
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: qp_signed is true
NI 43-101 Compliantpositive
Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.
Why it applies: reporting_standards includes ni_43_101
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.