Teuton Announces Assay Results that Confirm Porphyry-Style Copper Mineralization at Eastern Magnetic Anomaly, Ram Property, Golden Triangle, BC
Original announcement by tmx on
- Company
- Teuton Resources Corp.
- Ticker
- TUO
- Exchange
- TSX
- Region
- British Columbia
- Primary commodity
- Copper
- Secondary commodities
- Gold, Molybdenum, Silver
- Document categories
- Drill results
- Extracted
- 2026-09-17 03:04:08 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Teuton Resources Corp. announced assay results from its 2025 inaugural diamond drill program at the Ram Property in British Columbia's Golden Triangle. The drilling confirmed porphyry-style copper-gold-molybdenum mineralization at the Eastern Magnetic Anomaly, with broad, continuous intervals of copper. While copper grades are modest, the scale and consistency of mineralization support a significant exploration target. The program also intersected narrow, higher-grade gold mineralization at the Western Magnetic Anomaly.
Reasoning: The announcement confirms porphyry-style copper mineralization at the Eastern Magnetic Anomaly with broad, continuous intercepts, validating previous visual interpretations. While grades are modest, the scale and consistency support a legitimate exploration target. QA/QC and QP sign-off provide confidence in the results. However, true widths are not reported, and higher grades are narrow and near-surface at the Western Anomaly.
Positive factors
- Confirmation of porphyry-style mineralization at Eastern Magnetic Anomaly
- Broad zones of continuous copper mineralization intersected
- Elevated molybdenum values supporting porphyry interpretation
- QA/QC procedures and QP sign-off disclosed
Negative factors
- Copper grades are modest at this stage
- True thicknesses are unknown for reported intercepts
- Narrow, near-surface higher-grade mineralization at Western Anomaly
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 56
Extracted facts
Stored fact records: 56. Some facts used in scoring do not have a stored record.
Drill Results (56)
RAM25-001Ram · goldGrade: 0.03Grade Unit: g/tIntercept: 34 mView all detailsHide details
Identity
- Hole ID
- RAM25-001
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 34 m
- From
- 204 m
- To
- 238 m
- Hole Depth
- 256.56 m
- Intercept Depth
- 204 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-001:204-238
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low gold grade in a porphyry system, but contributes to the overall understanding of the mineralized zone. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Low gold grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.03”
Context: 34.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-001Ram · silverGrade: 0.9Grade Unit: g/tIntercept: 34 mView all detailsHide details
Identity
- Hole ID
- RAM25-001
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 34 m
- From
- 204 m
- To
- 238 m
- Hole Depth
- 256.56 m
- Intercept Depth
- 204 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-001:204-238
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade in a porphyry system, but contributes to the overall understanding of the mineralized zone. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Low silver grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.9”
Context: 34.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-001Ram · copperGrade: 424Grade Unit: ppmIntercept: 34 mView all detailsHide details
Identity
- Hole ID
- RAM25-001
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 424
- Grade Unit
- ppm
- Intercept
- 34 m
- From
- 204 m
- To
- 238 m
- Hole Depth
- 256.56 m
- Intercept Depth
- 204 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-001:204-238
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: A continuous 34m interval of copper mineralization, confirming porphyry-style, but at a low grade (424 ppm Cu). True width is not disclosed.
Positive factors
- Continuous interval of copper mineralization
- Confirms porphyry-style mineralization
Negative factors
- Low copper grade for porphyry deposit
- True thickness unknown
Evidence · table
“424.0”
Context: 34.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-001Ram · molybdenumGrade: 0.71Grade Unit: ppmIntercept: 34 mView all detailsHide details
Identity
- Hole ID
- RAM25-001
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.71
- Grade Unit
- ppm
- Intercept
- 34 m
- From
- 204 m
- To
- 238 m
- Hole Depth
- 256.56 m
- Intercept Depth
- 204 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-001:204-238
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low molybdenum grade, but contributes to the porphyry interpretation. True width is not disclosed.
Positive factors
- Supports porphyry interpretation
Negative factors
- Low molybdenum grade
- True thickness unknown
Evidence · table
“0.71”
Context: 34.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · goldGrade: 0.02Grade Unit: g/tIntercept: 91 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 91 m
- From
- 6 m
- To
- 97 m
- Hole Depth
- 361 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:6-97
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low gold grade over a long interval, contributing to the overall porphyry system. True width is not disclosed.
Positive factors
- Long continuous interval
- Part of a broad mineralized system
Negative factors
- Very low gold grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.02”
Context: 91.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · silverGrade: 0.3Grade Unit: g/tIntercept: 91 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 91 m
- From
- 6 m
- To
- 97 m
- Hole Depth
- 361 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:6-97
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low silver grade over a long interval, contributing to the overall porphyry system. True width is not disclosed.
Positive factors
- Long continuous interval
- Part of a broad mineralized system
Negative factors
- Very low silver grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.3”
Context: 91.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · copperGrade: 302.8Grade Unit: ppmIntercept: 91 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 302.8
- Grade Unit
- ppm
- Intercept
- 91 m
- From
- 6 m
- To
- 97 m
- Hole Depth
- 361 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:6-97
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: A long (91m) continuous interval of copper mineralization (302.8 ppm Cu) confirming porphyry-style, but at a low grade. True width is not disclosed.
Positive factors
- Long continuous interval of copper mineralization
- Confirms porphyry-style mineralization
Negative factors
- Low copper grade for porphyry deposit
- True thickness unknown
Evidence · table
“302.8”
Context: 91.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · molybdenumGrade: 12.34Grade Unit: ppmIntercept: 91 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 12.34
- Grade Unit
- ppm
- Intercept
- 91 m
- From
- 6 m
- To
- 97 m
- Hole Depth
- 361 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:6-97
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low molybdenum grade over a long interval, contributing to the porphyry interpretation. True width is not disclosed.
Positive factors
- Supports porphyry interpretation
Negative factors
- Low molybdenum grade
- True thickness unknown
Evidence · table
“12.34”
Context: 91.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · goldGrade: 1.53Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 1.53
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 111 m
- To
- 113 m
- Hole Depth
- 361 m
- Intercept Depth
- 111 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:111-113
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated gold grade (1.53 g/t) but over a very narrow 2m interval. True width is not disclosed.
Positive factors
- Elevated gold grade
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“1.53”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · silverGrade: 0.4Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 111 m
- To
- 113 m
- Hole Depth
- 361 m
- Intercept Depth
- 111 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:111-113
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low silver grade over a narrow interval. True width is not disclosed.
Negative factors
- Very low silver grade
- Narrow interval
- True thickness unknown
Evidence · table
“0.4”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · copperGrade: 25.5Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 25.5
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 111 m
- To
- 113 m
- Hole Depth
- 361 m
- Intercept Depth
- 111 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:111-113
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Extremely low copper grade over a narrow interval. True width is not disclosed.
Negative factors
- Extremely low copper grade
- Narrow interval
- True thickness unknown
Evidence · table
“25.5”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · molybdenumGrade: 1.84Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 1.84
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 111 m
- To
- 113 m
- Hole Depth
- 361 m
- Intercept Depth
- 111 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:111-113
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low molybdenum grade over a narrow interval. True width is not disclosed.
Negative factors
- Low molybdenum grade
- Narrow interval
- True thickness unknown
Evidence · table
“1.84”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · goldGrade: 0.02Grade Unit: g/tIntercept: 152 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 152 m
- From
- 179 m
- To
- 331 m
- Hole Depth
- 361 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:179-331
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low gold grade over a very long interval, contributing to the overall porphyry system. True width is not disclosed.
Positive factors
- Very long continuous interval
- Part of a broad mineralized system
Negative factors
- Very low gold grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.02”
Context: 152.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · silverGrade: 0.8Grade Unit: g/tIntercept: 152 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 152 m
- From
- 179 m
- To
- 331 m
- Hole Depth
- 361 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:179-331
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade over a very long interval, contributing to the overall porphyry system. True width is not disclosed.
Positive factors
- Very long continuous interval
- Part of a broad mineralized system
Negative factors
- Low silver grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.8”
Context: 152.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · copperGrade: 292.1Grade Unit: ppmIntercept: 152 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 292.1
- Grade Unit
- ppm
- Intercept
- 152 m
- From
- 179 m
- To
- 331 m
- Hole Depth
- 361 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:179-331
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: A very long (152m) continuous interval of copper mineralization (292.1 ppm Cu) confirming porphyry-style, but at a low grade. True width is not disclosed.
Positive factors
- Very long continuous interval of copper mineralization
- Confirms porphyry-style mineralization
Negative factors
- Low copper grade for porphyry deposit
- True thickness unknown
Evidence · table
“292.1”
Context: 152.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · molybdenumGrade: 12.32Grade Unit: ppmIntercept: 152 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 12.32
- Grade Unit
- ppm
- Intercept
- 152 m
- From
- 179 m
- To
- 331 m
- Hole Depth
- 361 m
- Intercept Depth
- 179 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:179-331
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low molybdenum grade over a very long interval, contributing to the porphyry interpretation. True width is not disclosed.
Positive factors
- Supports porphyry interpretation
Negative factors
- Low molybdenum grade
- True thickness unknown
Evidence · table
“12.32”
Context: 152.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · goldGrade: 0.03Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 343 m
- To
- 361 m
- Hole Depth
- 361 m
- Intercept Depth
- 343 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:343-361
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low gold grade in a porphyry system, but contributes to the overall understanding of the mineralized zone. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Low gold grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.03”
Context: 18.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · silverGrade: 0.8Grade Unit: g/tIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 343 m
- To
- 361 m
- Hole Depth
- 361 m
- Intercept Depth
- 343 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:343-361
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade in a porphyry system, but contributes to the overall understanding of the mineralized zone. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Low silver grade for porphyry deposit
- True thickness unknown
Evidence · table
“0.8”
Context: 18.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · copperGrade: 309.3Grade Unit: ppmIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 309.3
- Grade Unit
- ppm
- Intercept
- 18 m
- From
- 343 m
- To
- 361 m
- Hole Depth
- 361 m
- Intercept Depth
- 343 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:343-361
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: A continuous 18m interval of copper mineralization (309.3 ppm Cu) confirming porphyry-style, but at a low grade. True width is not disclosed.
Positive factors
- Continuous interval of copper mineralization
- Confirms porphyry-style mineralization
Negative factors
- Low copper grade for porphyry deposit
- True thickness unknown
Evidence · table
“309.3”
Context: 18.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-002Ram · molybdenumGrade: 83.56Grade Unit: ppmIntercept: 18 mView all detailsHide details
Identity
- Hole ID
- RAM25-002
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 83.56
- Grade Unit
- ppm
- Intercept
- 18 m
- From
- 343 m
- To
- 361 m
- Hole Depth
- 361 m
- Intercept Depth
- 343 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-002:343-361
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 452084
- Northing
- 6195169
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 230 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated molybdenum grade (83.56 ppm) over 18m, supporting the porphyry interpretation. True width is not disclosed.
Positive factors
- Elevated molybdenum values supporting porphyry interpretation
Negative factors
- True thickness unknown
Evidence · table
“83.56”
Context: 18.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-003Ram · goldGrade: 0.43Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-003
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 24.25 m
- To
- 26.25 m
- Hole Depth
- 355 m
- Intercept Depth
- 24.25 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-003:24.25-26.25
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 295 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated gold grade (0.43 g/t) over a narrow 2m interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Elevated gold grade
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“0.43”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-003Ram · silverGrade: 3.4Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-003
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 24.25 m
- To
- 26.25 m
- Hole Depth
- 355 m
- Intercept Depth
- 24.25 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-003:24.25-26.25
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 295 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade over a narrow interval. True width is not disclosed.
Negative factors
- Low silver grade
- Narrow interval
- True thickness unknown
Evidence · table
“3.4”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-003Ram · copperGrade: 2029.6Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-003
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 2029.6
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 24.25 m
- To
- 26.25 m
- Hole Depth
- 355 m
- Intercept Depth
- 24.25 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-003:24.25-26.25
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 295 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated copper grade (2029.6 ppm Cu) over a narrow 2m interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Elevated copper grade
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“2029.6”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-003Ram · molybdenumGrade: 224.52Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-003
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 224.52
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 24.25 m
- To
- 26.25 m
- Hole Depth
- 355 m
- Intercept Depth
- 24.25 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-003:24.25-26.25
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 295 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated molybdenum grade (224.52 ppm) over a narrow 2m interval, supporting the interpretation of a mineralized system. True width is not disclosed.
Positive factors
- Elevated molybdenum values
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“224.52”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · goldGrade: 0.15Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 78 m
- To
- 82 m
- Hole Depth
- 318 m
- Intercept Depth
- 78 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:78-82
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low gold grade over a narrow interval. True width is not disclosed.
Negative factors
- Low gold grade
- True thickness unknown
Evidence · table
“0.15”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · silverGrade: 1Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 78 m
- To
- 82 m
- Hole Depth
- 318 m
- Intercept Depth
- 78 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:78-82
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade over a narrow interval. True width is not disclosed.
Negative factors
- Low silver grade
- True thickness unknown
Evidence · table
“1.0”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · copperGrade: 416.4Grade Unit: ppmIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 416.4
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 78 m
- To
- 82 m
- Hole Depth
- 318 m
- Intercept Depth
- 78 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:78-82
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low copper grade over a narrow interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Part of localized vein mineralization
Negative factors
- Low copper grade
- True thickness unknown
Evidence · table
“416.4”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · molybdenumGrade: 54.34Grade Unit: ppmIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 54.34
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 78 m
- To
- 82 m
- Hole Depth
- 318 m
- Intercept Depth
- 78 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:78-82
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated molybdenum grade (54.34 ppm) over a narrow interval, supporting the interpretation of a mineralized system. True width is not disclosed.
Positive factors
- Elevated molybdenum values
Negative factors
- True thickness unknown
Evidence · table
“54.34”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · goldGrade: 3.64Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 3.64
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 180.5 m
- To
- 181.5 m
- Hole Depth
- 318 m
- Intercept Depth
- 180.5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:180.5-181.5
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: A high-grade gold intercept (3.64 g/t Au) but over a very narrow 1m interval, representing localized vein mineralization. True width is not disclosed.
Positive factors
- High-grade gold intercept
- Part of localized vein mineralization
Negative factors
- Very narrow interval
- True thickness unknown
Evidence · table
“3.64”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · silverGrade: 0.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 180.5 m
- To
- 181.5 m
- Hole Depth
- 318 m
- Intercept Depth
- 180.5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:180.5-181.5
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low silver grade over a very narrow interval. True width is not disclosed.
Negative factors
- Very low silver grade
- Very narrow interval
- True thickness unknown
Evidence · table
“0.8”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · copperGrade: 190.5Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 190.5
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 180.5 m
- To
- 181.5 m
- Hole Depth
- 318 m
- Intercept Depth
- 180.5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:180.5-181.5
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low copper grade over a very narrow interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Part of localized vein mineralization
Negative factors
- Low copper grade
- Very narrow interval
- True thickness unknown
Evidence · table
“190.5”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-004Ram · molybdenumGrade: 73.95Grade Unit: ppmIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- RAM25-004
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 73.95
- Grade Unit
- ppm
- Intercept
- 1 m
- From
- 180.5 m
- To
- 181.5 m
- Hole Depth
- 318 m
- Intercept Depth
- 180.5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-004:180.5-181.5
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated molybdenum grade (73.95 ppm) over a very narrow interval, supporting the interpretation of a mineralized system. True width is not disclosed.
Positive factors
- Elevated molybdenum values
Negative factors
- Very narrow interval
- True thickness unknown
Evidence · table
“73.95”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-005Ram · goldGrade: 0.48Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-005
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.48
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 30 m
- To
- 32 m
- Hole Depth
- 225 m
- Intercept Depth
- 30 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-005:30-32
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated gold grade (0.48 g/t) over a narrow 2m interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Elevated gold grade
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“0.48”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-005Ram · silverGrade: 1.7Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-005
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 30 m
- To
- 32 m
- Hole Depth
- 225 m
- Intercept Depth
- 30 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-005:30-32
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade over a narrow interval. True width is not disclosed.
Negative factors
- Low silver grade
- Narrow interval
- True thickness unknown
Evidence · table
“1.7”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-005Ram · copperGrade: 844.3Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-005
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 844.3
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 30 m
- To
- 32 m
- Hole Depth
- 225 m
- Intercept Depth
- 30 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-005:30-32
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated copper grade (844.3 ppm Cu) over a narrow 2m interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Elevated copper grade
- Part of localized vein mineralization
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“844.3”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-005Ram · molybdenumGrade: 345.22Grade Unit: ppmIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- RAM25-005
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 345.22
- Grade Unit
- ppm
- Intercept
- 2 m
- From
- 30 m
- To
- 32 m
- Hole Depth
- 225 m
- Intercept Depth
- 30 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-005:30-32
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 270 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: High molybdenum grade (345.22 ppm) over a narrow 2m interval, strongly supporting the interpretation of a fertile porphyry environment. True width is not disclosed.
Positive factors
- High molybdenum grade
- Supports interpretation of a fertile porphyry environment
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“345.22”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-006Ram · goldGrade: 0.08Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- RAM25-006
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 15 m
- To
- 29 m
- Hole Depth
- 123 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-006:15-29
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 330 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low gold grade over a narrow interval. True width is not disclosed.
Negative factors
- Low gold grade
- True thickness unknown
Evidence · table
“0.08”
Context: 14.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-006Ram · silverGrade: 0.7Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- RAM25-006
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 15 m
- To
- 29 m
- Hole Depth
- 123 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-006:15-29
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 330 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade over a narrow interval. True width is not disclosed.
Negative factors
- Low silver grade
- True thickness unknown
Evidence · table
“0.7”
Context: 14.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-006Ram · copperGrade: 336.3Grade Unit: ppmIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- RAM25-006
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 336.3
- Grade Unit
- ppm
- Intercept
- 14 m
- From
- 15 m
- To
- 29 m
- Hole Depth
- 123 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-006:15-29
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 330 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low copper grade over a narrow interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Part of localized vein mineralization
Negative factors
- Low copper grade
- True thickness unknown
Evidence · table
“336.3”
Context: 14.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-006Ram · molybdenumGrade: 53.06Grade Unit: ppmIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- RAM25-006
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 53.06
- Grade Unit
- ppm
- Intercept
- 14 m
- From
- 15 m
- To
- 29 m
- Hole Depth
- 123 m
- Intercept Depth
- 15 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-006:15-29
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 330 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated molybdenum grade (53.06 ppm) over a narrow interval, supporting the interpretation of a mineralized system. True width is not disclosed.
Positive factors
- Elevated molybdenum values
Negative factors
- True thickness unknown
Evidence · table
“53.06”
Context: 14.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · goldGrade: 0.19Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 5 m
- To
- 9.1 m
- Hole Depth
- 339 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:5-9.1
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low gold grade over a narrow interval. True width is not disclosed.
Negative factors
- Low gold grade
- True thickness unknown
Evidence · table
“0.19”
Context: 4.10
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · silverGrade: 4.6Grade Unit: g/tIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 4.1 m
- From
- 5 m
- To
- 9.1 m
- Hole Depth
- 339 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:5-9.1
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade over a narrow interval. True width is not disclosed.
Negative factors
- Low silver grade
- True thickness unknown
Evidence · table
“4.6”
Context: 4.10
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · copperGrade: 2226.3Grade Unit: ppmIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 2226.3
- Grade Unit
- ppm
- Intercept
- 4.1 m
- From
- 5 m
- To
- 9.1 m
- Hole Depth
- 339 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:5-9.1
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated copper grade (2226.3 ppm Cu) over a narrow 4.1m interval, part of localized vein mineralization. True width is not disclosed.
Positive factors
- Elevated copper grade
- Part of localized vein mineralization
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“2226.3”
Context: 4.10
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · molybdenumGrade: 197.96Grade Unit: ppmIntercept: 4.1 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 197.96
- Grade Unit
- ppm
- Intercept
- 4.1 m
- From
- 5 m
- To
- 9.1 m
- Hole Depth
- 339 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:5-9.1
- Mining Method
- open_pit
Location
- Location
- Western
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated molybdenum grade (197.96 ppm) over a narrow interval, supporting the interpretation of a mineralized system. True width is not disclosed.
Positive factors
- Elevated molybdenum values
Negative factors
- True thickness unknown
Evidence · table
“197.96”
Context: 4.10
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · goldGrade: 0.16Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 49 m
- To
- 53 m
- Hole Depth
- 339 m
- Intercept Depth
- 49 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:49-53
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low gold grade in a porphyry system, but contributes to the overall understanding of the mineralized zone. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Low gold grade
- True thickness unknown
Evidence · table
“0.16”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · silverGrade: 4.4Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 4.4
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 49 m
- To
- 53 m
- Hole Depth
- 339 m
- Intercept Depth
- 49 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:49-53
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade in a porphyry system, but contributes to the overall understanding of the mineralized zone. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Low silver grade
- True thickness unknown
Evidence · table
“4.4”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · copperGrade: 2786.5Grade Unit: ppmIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 2786.5
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 49 m
- To
- 53 m
- Hole Depth
- 339 m
- Intercept Depth
- 49 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:49-53
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Elevated copper grade (2786.5 ppm Cu) over a narrow 4m interval, confirming porphyry-style mineralization. True width is not disclosed.
Positive factors
- Elevated copper grade
- Confirms porphyry-style mineralization
Negative factors
- Narrow interval
- True thickness unknown
Evidence · table
“2786.5”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · molybdenumGrade: 29.28Grade Unit: ppmIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 29.28
- Grade Unit
- ppm
- Intercept
- 4 m
- From
- 49 m
- To
- 53 m
- Hole Depth
- 339 m
- Intercept Depth
- 49 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:49-53
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low molybdenum grade over a narrow interval, contributing to the porphyry interpretation. True width is not disclosed.
Positive factors
- Supports porphyry interpretation
Negative factors
- Low molybdenum grade
- True thickness unknown
Evidence · table
“29.28”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · goldGrade: 0.02Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 107 m
- To
- 128 m
- Hole Depth
- 339 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:107-128
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low gold grade over a narrow interval. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Very low gold grade
- True thickness unknown
Evidence · table
“0.02”
Context: 21.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · silverGrade: 0.3Grade Unit: g/tIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.3
- Grade Unit
- g/t
- Intercept
- 21 m
- From
- 107 m
- To
- 128 m
- Hole Depth
- 339 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:107-128
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low silver grade over a narrow interval. True width is not disclosed.
Positive factors
- Part of a broad mineralized system
Negative factors
- Very low silver grade
- True thickness unknown
Evidence · table
“0.3”
Context: 21.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · copperGrade: 411Grade Unit: ppmIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 411
- Grade Unit
- ppm
- Intercept
- 21 m
- From
- 107 m
- To
- 128 m
- Hole Depth
- 339 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:107-128
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: A continuous 21m interval of copper mineralization (411 ppm Cu) confirming porphyry-style, but at a low grade. True width is not disclosed.
Positive factors
- Continuous interval of copper mineralization
- Confirms porphyry-style mineralization
Negative factors
- Low copper grade
- True thickness unknown
Evidence · table
“411.0”
Context: 21.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · molybdenumGrade: 3.49Grade Unit: ppmIntercept: 21 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 3.49
- Grade Unit
- ppm
- Intercept
- 21 m
- From
- 107 m
- To
- 128 m
- Hole Depth
- 339 m
- Intercept Depth
- 107 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:107-128
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low molybdenum grade over a narrow interval, contributing to the porphyry interpretation. True width is not disclosed.
Positive factors
- Supports porphyry interpretation
Negative factors
- Very low molybdenum grade
- True thickness unknown
Evidence · table
“3.49”
Context: 21.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · goldGrade: 0.02Grade Unit: g/tIntercept: 163.4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- gold
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 163.4 m
- From
- 173.6 m
- To
- 337 m
- Hole Depth
- 339 m
- Intercept Depth
- 173.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:173.6-337
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Very low gold grade over a very long interval, contributing to the overall porphyry system. True width is not disclosed.
Positive factors
- Very long continuous interval
- Part of a broad mineralized system
Negative factors
- Very low gold grade
- True thickness unknown
Evidence · table
“0.02”
Context: 163.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · silverGrade: 0.4Grade Unit: g/tIntercept: 163.4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- silver
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 163.4 m
- From
- 173.6 m
- To
- 337 m
- Hole Depth
- 339 m
- Intercept Depth
- 173.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:173.6-337
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low silver grade over a very long interval, contributing to the overall porphyry system. True width is not disclosed.
Positive factors
- Very long continuous interval
- Part of a broad mineralized system
Negative factors
- Low silver grade
- True thickness unknown
Evidence · table
“0.4”
Context: 163.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · copperGrade: 151.4Grade Unit: ppmIntercept: 163.4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- copper
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 151.4
- Grade Unit
- ppm
- Intercept
- 163.4 m
- From
- 173.6 m
- To
- 337 m
- Hole Depth
- 339 m
- Intercept Depth
- 173.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:173.6-337
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: A very long (163.4m) continuous interval of copper mineralization (151.4 ppm Cu) confirming porphyry-style, but at a very low grade. True width is not disclosed.
Positive factors
- Very long continuous interval of copper mineralization
- Confirms porphyry-style mineralization
Negative factors
- Very low copper grade
- True thickness unknown
Evidence · table
“151.4”
Context: 163.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
RAM25-007Ram · molybdenumGrade: 12.53Grade Unit: ppmIntercept: 163.4 mView all detailsHide details
Identity
- Hole ID
- RAM25-007
- Project
- Ram
- Commodity
- molybdenum
- Region
- canada_bc
- Reported Region
- canada_bc
- Ticker
- TUO
Geometry
- Grade
- 12.53
- Grade Unit
- ppm
- Intercept
- 163.4 m
- From
- 173.6 m
- To
- 337 m
- Hole Depth
- 339 m
- Intercept Depth
- 173.6 m
Classification
- Deposit Type
- porphyry
- Program
- exploration
- Sample Type
- drill
- Group ID
- RAM25-007:173.6-337
- Mining Method
- open_pit
Location
- Location
- Eastern
- Easting
- 451896
- Northing
- 6194576
- CRS
- NAD83 UTM Zone 9
- Azimuth
- 62 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- MSALABS
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- Yes
- Deleterious Elements
- arsenic
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-12T00:00:00.000Z
Reasoning: Low molybdenum grade over a very long interval, contributing to the porphyry interpretation. True width is not disclosed.
Positive factors
- Supports porphyry interpretation
Negative factors
- Low molybdenum grade
- True thickness unknown
Evidence · table
“12.53”
Context: 163.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“* Length reported is drill length – true thicknesses are unknown”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure with lab certification and stated methods.
Evidence · text
“Teuton implemented an internal Quality Assurance/Quality Control program with the insertion of blanks and certified standards at a ratio of at least 1 per 25 samples.”
Deleterious Elements Presentnegative
A source-stated penalty, refractory or recovery concern in the fact's scope. Element detection alone, including measured elements explicitly below penalty thresholds, does not trigger this tag. Respect negation and retain a separately stated concern even when another risk is explicitly absent.
Why it applies: Arsenic is noted as a deleterious element in the release.
Evidence · text
“arsenic (“ As ”) values (e.g. 204.00 m grading 103 ppm Cu and 110 ppm As; RAM25-03 130 – 334 m)”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.