Thunder Gold Intersects 409.5 Metres Averaging 0.307 g/t Au (Including 111.0 Metres Averaging 0.514 g/t Au) at Tower Mountain
Original announcement by orestocks on
- Company
- Thunder Gold Corp.
- Ticker
- TGOL.V
- Exchange
- Unavailable
- Region
- Ontario
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-22 12:47:29 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Thunder Gold Corp. announced significant infill drill results from its Tower Mountain Property in Ontario, including 409.5 metres averaging 0.307 g/t Au (with 111.0 metres at 0.514 g/t Au) in hole TM26-214. The drilling aims to upgrade inferred resources to indicated, with reconciliation suggesting overall drilled grades are 10% higher than model predictions. The company also provided an updated mineral resource estimate with 34.5 Mt at 0.46 g/t Au indicated and 211.1 Mt at 0.45 g/t Au inferred.
Reasoning: The announcement reports significant gold intercepts from infill drilling aimed at resource conversion at the Tower Mountain project. While some individual intercepts are lower grade or below model predictions, the overall reconciliation suggests an improvement in drilled grades versus the model. The comprehensive QA/QC and focus on resource upgrade are positive, but the relatively low average grades and some discrepancies with model predictions warrant caution.
Positive factors
- Significant gold intercepts, particularly in TM26-214, with a long interval of 409.5m at 0.307 g/t Au including 111.0m at 0.514 g/t Au, indicating broad mineralization.
- Drilling is focused on resource conversion (infill drilling) to upgrade inferred resources to indicated, which de-risks the project.
- The MRE reconciliation suggests actual drilled grades are collectively 10% higher than model predicted grades, improving confidence in the resource model.
- True width is disclosed for the main intercept in TM26-214 (190.0m), providing better geological understanding.
- Comprehensive QA/QC procedures are disclosed, including accredited laboratories, certified standards, blanks, and duplicate pulps, enhancing data credibility.
Negative factors
- Some intercepts, like TM26-211 (396.0m at 0.110 g/t Au) and parts of TM26-212 (369.0m at 0.060 g/t Au), are below the MRE cut-off grade of 0.19 g/t Au, indicating lower-grade zones.
- TM26-214's overall average grade (0.271 g/t Au) was 38% less than the model predicted (0.434 g/t Au) over the same interval, despite the positive overall reconciliation.
- Many intercepts are reported with 'Unknown' true width, which can overstate the actual thickness of mineralization.
- The project's average grade (0.45-0.46 g/t Au) for the resource estimate is relatively low for gold deposits, even for open-pit scenarios.
Facts used in scoring: 21
Extracted facts
Stored fact records: 21. Some facts used in scoring do not have a stored record.
Drill Results (21)
TM26-211Tower Mountain · goldGrade: 0.11Grade Unit: g/tIntercept: 396 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 396 m
- From
- 6 m
- To
- 402 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:6-402
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept is long but below the stated MRE cut-off grade, suggesting it's not economically significant on its own, though it contributes to understanding the broader mineralized envelope. The true width is not disclosed.
Positive factors
- Long intercept length of 396.0m, indicating broad mineralization.
- Drilling is for resource conversion, aiming to upgrade resource confidence.
Negative factors
- Grade of 0.110 g/t Au is below the MRE cut-off grade of 0.19 g/t Au, indicating lower-grade material.
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.110”
Context: 396.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.235Grade Unit: g/tIntercept: 25.5 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.235
- Grade Unit
- g/t
- Intercept
- 25.5 m
- From
- 91.5 m
- To
- 117 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:91.5-117
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a moderate-grade intercept above the cut-off, contributing to the resource conversion efforts. True width is not disclosed.
Positive factors
- Grade of 0.235 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Negative factors
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.235”
Context: 25.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.184Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.184
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 210 m
- To
- 222 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:210-222
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This intercept is below the cut-off grade and has unknown true width, limiting its individual significance.
Negative factors
- Grade of 0.184 g/t Au is slightly below the MRE cut-off grade of 0.19 g/t Au.
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.184”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.347Grade Unit: g/tIntercept: 40.5 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.347
- Grade Unit
- g/t
- Intercept
- 40.5 m
- From
- 256.5 m
- To
- 297 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:256.5-297
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a moderate-grade intercept above the cut-off, contributing positively to resource conversion. True width is not disclosed.
Positive factors
- Grade of 0.347 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Negative factors
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.347”
Context: 40.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-211Tower Mountain · goldGrade: 0.215Grade Unit: g/tIntercept: 12 mView all detailsHide details
Identity
- Hole ID
- TM26-211
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.215
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 369 m
- To
- 381 m
- Hole Depth
- 402 m
- Intercept Depth
- 6 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-211:369-381
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300798
- Northing
- 5377244
- Elevation
- 511 m
- Azimuth
- 40 °
- Dip
- -64.9 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a moderate-grade intercept above the cut-off, contributing to the resource conversion efforts. True width is not disclosed.
Positive factors
- Grade of 0.215 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Negative factors
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.215”
Context: 12.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.194Grade Unit: g/tIntercept: 592.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.194
- Grade Unit
- g/t
- Intercept
- 592.5 m
- From
- 7.5 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:7.5-600
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a very long intercept at the cut-off grade, suggesting broad but marginal mineralization. True width is not disclosed.
Positive factors
- Very long intercept length of 592.5m, indicating extensive mineralization.
- Drilling is for resource conversion, aiming to upgrade resource confidence.
Negative factors
- Grade of 0.194 g/t Au is at the MRE cut-off grade of 0.19 g/t Au, indicating marginal material.
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.194”
Context: 592.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.06Grade Unit: g/tIntercept: 369 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 369 m
- From
- 7.5 m
- To
- 376.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:7.5-376.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a very long intercept but with a very low grade, well below the cut-off, indicating it's not economically viable. True width is not disclosed.
Positive factors
- Long intercept length of 369.0m, indicating broad mineralization.
Negative factors
- Grade of 0.060 g/t Au is significantly below the MRE cut-off grade of 0.19 g/t Au.
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.060”
Context: 369.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.343Grade Unit: g/tIntercept: 13.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.343
- Grade Unit
- g/t
- Intercept
- 13.5 m
- From
- 75 m
- To
- 88.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:75-88.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a moderate-grade intercept above the cut-off, contributing positively to resource conversion. True width is not disclosed.
Positive factors
- Grade of 0.343 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Negative factors
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.343”
Context: 13.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.346Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.346
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 236 m
- To
- 251.5 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:236-251.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a moderate-grade intercept above the cut-off, contributing positively to resource conversion. True width is not disclosed.
Positive factors
- Grade of 0.346 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Negative factors
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.346”
Context: 15.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.283Grade Unit: g/tIntercept: 223.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.283
- Grade Unit
- g/t
- Intercept
- 223.5 m
- From
- 376.5 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:376.5-600
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a long, moderate-grade intercept above the cut-off, contributing positively to resource conversion. True width is not disclosed.
Positive factors
- Long intercept length of 223.5m, indicating broad mineralization.
- Grade of 0.283 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Negative factors
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.283”
Context: 223.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.19Grade Unit: g/tIntercept: 136.5 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 136.5 m
- From
- 376.5 m
- To
- 513 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:376.5-513
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a long intercept at the cut-off grade, suggesting broad but marginal mineralization. True width is not disclosed.
Positive factors
- Long intercept length of 136.5m, indicating broad mineralization.
Negative factors
- Grade of 0.190 g/t Au is at the MRE cut-off grade of 0.19 g/t Au, indicating marginal material.
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.190”
Context: 136.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.442Grade Unit: g/tIntercept: 84 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.442
- Grade Unit
- g/t
- Intercept
- 84 m
- From
- 513 m
- To
- 597 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:513-597
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a strong, moderate-length intercept well above the cut-off grade, contributing significantly to resource conversion and showing increased grade with depth. True width is not disclosed.
Positive factors
- Strong grade of 0.442 g/t Au, well above the MRE cut-off grade of 0.19 g/t Au.
- Good intercept length of 84.0m.
Negative factors
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.442”
Context: 84.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-212Tower Mountain · goldGrade: 0.085Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- TM26-212
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.085
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 597 m
- To
- 600 m
- Hole Depth
- 600 m
- Intercept Depth
- 7.5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-212:597-600
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300674
- Northing
- 5377170
- Elevation
- 502 m
- Azimuth
- 40 °
- Dip
- -49.6 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a very narrow, low-grade intercept below the cut-off, with limited individual significance. True width is not disclosed.
Negative factors
- Grade of 0.085 g/t Au is significantly below the MRE cut-off grade of 0.19 g/t Au.
- Very narrow intercept length of 3.0m.
- True width is unknown, which may overstate the actual thickness.
Evidence · table
“0.085”
Context: 3.0
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.271Grade Unit: g/tIntercept: 496 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.271
- Grade Unit
- g/t
- Intercept
- 496 m
- True Width
- 230.1 m
- From
- 5 m
- To
- 501 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:5-501
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a very long intercept with a disclosed true width and a grade above the cut-off, making it a significant result for resource conversion. However, the grade was lower than model predictions for this specific interval.
Positive factors
- Very long intercept length of 496.0m, indicating extensive mineralization.
- True width of 230.1m is disclosed, providing confidence in the geometry.
- Grade of 0.271 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Negative factors
- Grade was 38% less than the model predicted (0.434 g/t Au) over the same interval.
Evidence · table
“0.271”
Context: 496.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 230.1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.307Grade Unit: g/tIntercept: 409.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.307
- Grade Unit
- g/t
- Intercept
- 409.5 m
- True Width
- 190 m
- From
- 21 m
- To
- 430.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:21-430.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a very long, moderate-grade intercept with disclosed true width, making it a highly material result for resource conversion.
Positive factors
- Very long intercept length of 409.5m, indicating extensive mineralization.
- True width of 190.0m is disclosed, providing confidence in the geometry.
- Grade of 0.307 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Evidence · table
“0.307”
Context: 409.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 190
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.306Grade Unit: g/tIntercept: 30 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.306
- Grade Unit
- g/t
- Intercept
- 30 m
- True Width
- 13.9 m
- From
- 21 m
- To
- 51 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:21-51
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a moderate-grade intercept with disclosed true width, contributing positively to resource conversion.
Positive factors
- Grade of 0.306 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
- True width of 13.9m is disclosed.
Evidence · table
“0.306”
Context: 30.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 13.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.177Grade Unit: g/tIntercept: 127.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.177
- Grade Unit
- g/t
- Intercept
- 127.5 m
- True Width
- 59.2 m
- From
- 51 m
- To
- 178.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:51-178.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a long intercept with disclosed true width, but the grade is slightly below the cut-off, limiting its individual economic significance.
Positive factors
- Long intercept length of 127.5m with disclosed true width of 59.2m.
Negative factors
- Grade of 0.177 g/t Au is below the MRE cut-off grade of 0.19 g/t Au.
Evidence · table
“0.177”
Context: 127.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 59.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.28Grade Unit: g/tIntercept: 130.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 130.5 m
- True Width
- 60.6 m
- From
- 178.5 m
- To
- 309 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:178.5-309
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a long, moderate-grade intercept with disclosed true width, contributing positively to resource conversion.
Positive factors
- Long intercept length of 130.5m with disclosed true width of 60.6m.
- Grade of 0.280 g/t Au is above the MRE cut-off grade of 0.19 g/t Au.
Evidence · table
“0.280”
Context: 130.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 60.6
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.038Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.038
- Grade Unit
- g/t
- Intercept
- 10.5 m
- True Width
- 4.9 m
- From
- 309 m
- To
- 319.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:309-319.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a narrow, very low-grade intercept, well below the cut-off, with limited individual significance.
Negative factors
- Grade of 0.038 g/t Au is significantly below the MRE cut-off grade of 0.19 g/t Au.
- True width of 4.9m is disclosed, but the grade is very low.
Evidence · table
“0.038”
Context: 10.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4.9
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.514Grade Unit: g/tIntercept: 111 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.514
- Grade Unit
- g/t
- Intercept
- 111 m
- True Width
- 51.5 m
- From
- 319.5 m
- To
- 430.5 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:319.5-430.5
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a strong, long intercept with disclosed true width, representing a highly material result for resource conversion and a highlight of the drilling program.
Positive factors
- Strong grade of 0.514 g/t Au, well above the MRE cut-off grade of 0.19 g/t Au.
- Long intercept length of 111.0m with disclosed true width of 51.5m.
Evidence · table
“0.514”
Context: 111.0
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 51.5
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
TM26-214Tower Mountain · goldGrade: 0.123Grade Unit: g/tIntercept: 70.5 mView all detailsHide details
Identity
- Hole ID
- TM26-214
- Project
- Tower Mountain
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TGOL.V
Geometry
- Grade
- 0.123
- Grade Unit
- g/t
- Intercept
- 70.5 m
- True Width
- 32.7 m
- From
- 430.5 m
- To
- 501 m
- Hole Depth
- 501 m
- Intercept Depth
- 5 m
Classification
- Deposit Type
- orogenic
- Program
- resource
- Sample Type
- drill
- Group ID
- TM26-214:430.5-501
- Mining Method
- open_pit
Location
- Location
- Bench Target
- Easting
- 300805
- Northing
- 5377391
- Elevation
- 487.7 m
- Azimuth
- 60 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Activation Laboratories Ltd. and AGAT Laboratories
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-09-22T00:00:00.000Z
Reasoning: This is a moderate-length intercept with disclosed true width, but the grade is below the cut-off, limiting its individual economic significance and contributing to the overall hole's underperformance against the model.
Positive factors
- Disclosed true width of 32.7m.
Negative factors
- Grade of 0.123 g/t Au is below the MRE cut-off grade of 0.19 g/t Au.
- This interval contributed to TM26-214's overall grade being lower than model predicted.
Evidence · table
“0.123”
Context: 70.5
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 32.7
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.