Thunder Gold Reports 121.5 metres Averaging 0.376 g/t Au in New Target Located 200 metres East of Current Resource Pit Optimization Limit

Original announcement by orestocks on

Company
Thunder Gold Corp.
Ticker
TGOL.V
Exchange
Unavailable
Region
Ontario
Primary commodity
Gold
Secondary commodities
None reported
Document categories
Drill results, Resource update
Extracted
2026-09-17 12:34:35 UTC

Analysis by Minestarters Atlas

Minestarters Atlas analysis

Summary

Thunder Gold reported exploration diamond drill results from its Tower Mountain Property, highlighting new gold mineralization at the Bench Target. Hole TM26-205 intersected 121.5 metres averaging 0.376 g/t Au in a new target located 200 metres east of the current resource pit limit. All seven holes drilled intersected mineralization above the 0.19 g/t Au resource cut-off grade in areas previously classified as waste, indicating potential to reduce the waste-to-ore strip ratio and expand the resource.

Reasoning: Thunder Gold reported positive exploration drill results from its Tower Mountain Property, identifying new gold mineralization in areas previously considered waste within the pit shell and extending mineralization significantly to the east. The results indicate potential to improve project economics by reducing the strip ratio and expanding the resource footprint, although many grades are low.

Positive factors

  • Discovery of new mineralization in previously un-drilled areas within the existing pit shell, potentially reducing waste-to-ore strip ratio.
  • Significant step-out extension of mineralization 200m east of the current resource pit limit (TM26-205).
  • Long intercepts of continuous gold mineralization, including 121.5m at 0.376 g/t Au and 287.7m at 0.223 g/t Au.
  • All seven holes intersected mineralization above the current resource cut-off grade (0.19 g/t Au).
  • Good to excellent correlation with the current resource model in tested areas, verifying predictive accuracy.

Negative factors

  • Many reported intercepts are wide but low-grade, close to the economic cut-off.
  • True width is often unknown for significant intercepts, limiting confidence in actual thickness.

Low confidence — this extraction should be reviewed alongside the original source.

Facts used in scoring: 46

Classification and evidence

Step-Out Extensionpositive

Mineralization extended beyond the previously known limit.

Why it applies: Hole TM26-205 identified significant new mineralization 200 metres east of the current resource pit limit, extending the known mineralized zone.

Evidence · text

“The most significant mineralization occurs in TM26-205 (121.5 metres averaging 0.376 g/t Au). This mineralization lies 200 metres east of the 2026 MRE resource pit limit”

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: The release includes a detailed Quality Assurance and Quality Control section, mentioning certified standards, blanks, duplicate pulps, and accredited laboratories (Activation Laboratories Ltd. and AGAT Laboratories).

Evidence · text

“Quality Assurance and Quality Control Diamond drilling utilizes NQ diameter tooling. The core is received at the on-site logging facility where it is, photographed, logged for geotechnical, physical properties and geological data. Samples are identified, recorded, and cut in half by wet diamond saw. Half the core is sent for assay at an accredited laboratory with the remaining half core stored on site. A standard sample length of 1.5 meters is typically employed, varying only at major lithological contacts. Certified standards and blanks are randomly inserted into the sample stream and constitute approximately 10% of the sample stream. Certified standards and blank performance is monitored with any failures evaluated and investigated to determine if said failure is a result of error during submission. Any unexplained failures are identified and the five samples preceding and following the failure are re-assayed. Commencing in 2026, duplicate pulps are prepared at a rate of 1 in every 20 samples. The duplicate pulps are sent to a second independent analytical facility for analyses. Activation Laboratories Ltd., Thunder Bay, Ontario, ISO/IEC 17025:2017 is the primary independent analytical service provider. AGAT Laboratories, Thunder Bay, Ontario, ISO/IEC 17025:2017 is the secondary, independent analytical facility.”

Apparent Width Onlynegative

Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.

Why it applies: Many significant intercepts, including the headline 121.5m interval in TM26-205, are reported with 'Unknown' true width, indicating the downhole length may overstate true thickness.

Evidence · table

“Unknown”

Context: 121.5

Cut-off Disclosedpositive

Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: The release explicitly states the Mineral Resource Estimate cut-off grade of 0.19 g/t Au, which is used as a reference for the reported intervals.

Evidence · text

“All intervals above the MRE cut-off grade (0.19 g/t Au) offer potential to reduce the waste:ore strip ratio”

Extracted facts

Stored fact records: 46. Some facts used in scoring do not have a stored record.

Drill Results (44)

TM26-201Tower Mountain · goldGrade: 0.556Grade Unit: g/tIntercept: 3 mView all details
Link to this fact

Identity

Hole ID
TM26-201
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.556
Grade Unit
g/t
Intercept
3 m
True Width
1.6 m
From
29 m
To
32 m
Hole Depth
600 m
Intercept Depth
29 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-201:29-32
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377254
Elevation
521 m
Azimuth
65 °
Dip
-45 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a moderate grade above cut-off, contributing to the overall positive results from the program.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).
  • True width is disclosed.

Negative factors

  • Narrow intercept length.

Evidence · table

“0.556”

Context: 3.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.6

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-201Tower Mountain · goldGrade: 0.345Grade Unit: g/tIntercept: 30.4 mView all details
Link to this fact

Identity

Hole ID
TM26-201
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.345
Grade Unit
g/t
Intercept
30.4 m
True Width
16.2 m
From
55.6 m
To
86 m
Hole Depth
600 m
Intercept Depth
55.6 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-201:55.6-86
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377254
Elevation
521 m
Azimuth
65 °
Dip
-45 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width intercept with a low-moderate grade, contributing positively to the overall exploration results.

Positive factors

  • Good intercept length (30.4m) with grade above cut-off.
  • True width is disclosed (16.2m).

Negative factors

  • Grade is relatively low for gold.

Evidence · table

“0.345”

Context: 30.4

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 16.2

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-201Tower Mountain · goldGrade: 0.228Grade Unit: g/tIntercept: 19.5 mView all details
Link to this fact

Identity

Hole ID
TM26-201
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.228
Grade Unit
g/t
Intercept
19.5 m
True Width
10.4 m
From
217.5 m
To
237 m
Hole Depth
600 m
Intercept Depth
217.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-201:217.5-237
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377254
Elevation
521 m
Azimuth
65 °
Dip
-45 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A moderate width intercept with a low grade, confirming mineralization above the cut-off.

Positive factors

  • Intercept length is moderate (19.5m) with grade above cut-off.
  • True width is disclosed (10.4m).

Negative factors

  • Grade is very low, just above the cut-off.

Evidence · table

“0.228”

Context: 19.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 10.4

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-201Tower Mountain · goldGrade: 5.745Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-201
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
5.745
Grade Unit
g/t
Intercept
1.5 m
From
367.5 m
To
369 m
Hole Depth
600 m
Intercept Depth
367.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-201:367.5-369
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377254
Elevation
521 m
Azimuth
65 °
Dip
-45 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A high-grade but very narrow intercept, indicating localized higher-grade mineralization.

Positive factors

  • High-grade gold intercept (5.745 g/t Au) for an open-pit scenario.

Negative factors

  • Very narrow intercept length (1.5m).
  • True width is unknown.

Evidence · table

“5.745”

Context: 1.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-201Tower Mountain · goldGrade: 0.25Grade Unit: g/tIntercept: 31.5 mView all details
Link to this fact

Identity

Hole ID
TM26-201
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.25
Grade Unit
g/t
Intercept
31.5 m
From
383.5 m
To
415 m
Hole Depth
600 m
Intercept Depth
383.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-201:383.5-415
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377254
Elevation
521 m
Azimuth
65 °
Dip
-45 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width intercept with a very low grade, confirming mineralization above the cut-off.

Positive factors

  • Good intercept length (31.5m) with grade above cut-off.

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown.

Evidence · table

“0.250”

Context: 31.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-201Tower Mountain · goldGrade: 0.26Grade Unit: g/tIntercept: 9 mView all details
Link to this fact

Identity

Hole ID
TM26-201
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.26
Grade Unit
g/t
Intercept
9 m
From
576.5 m
To
585.5 m
Hole Depth
600 m
Intercept Depth
576.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-201:576.5-585.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377254
Elevation
521 m
Azimuth
65 °
Dip
-45 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a very low grade, confirming mineralization above the cut-off.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown.

Evidence · table

“0.260”

Context: 9.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.545Grade Unit: g/tIntercept: 158.6 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.545
Grade Unit
g/t
Intercept
158.6 m
True Width
82 m
From
4.9 m
To
163.5 m
Hole Depth
603 m
Intercept Depth
4.9 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:4.9-163.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: An excellent, very wide intercept with a good grade, confirming near-surface mineralization within the existing pit shell and validating the resource model.

Positive factors

  • Very long intercept length (158.6m) with a good grade for an open-pit gold project.
  • True width is disclosed (82.0m), confirming significant thickness.
  • Lies entirely within the current pit limit, verifying the resource model.

Evidence · table

“0.545”

Context: 158.6

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 82

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 1.088Grade Unit: g/tIntercept: 54 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
1.088
Grade Unit
g/t
Intercept
54 m
True Width
27.9 m
From
6 m
To
60 m
Hole Depth
603 m
Intercept Depth
6 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:6-60
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A strong, wide, near-surface intercept with excellent grade, representing a high-grade core within the Bench Target.

Positive factors

  • Very good intercept length (54.0m) with strong grade (1.088 g/t Au) for an open-pit gold project.
  • True width is disclosed (27.9m), confirming significant thickness.
  • Near surface intercept, favorable for open-pit mining.

Evidence · table

“1.088”

Context: 54.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 27.9

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 1.433Grade Unit: g/tIntercept: 4.5 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
1.433
Grade Unit
g/t
Intercept
4.5 m
True Width
2.3 m
From
78 m
To
82.5 m
Hole Depth
603 m
Intercept Depth
78 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:78-82.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow but high-grade intercept, contributing to the overall high-grade core of the Bench Target.

Positive factors

  • Strong grade (1.433 g/t Au) for an open-pit gold project.
  • True width is disclosed (2.3m).

Negative factors

  • Narrow intercept length (4.5m).

Evidence · table

“1.433”

Context: 4.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 2.3

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.953Grade Unit: g/tIntercept: 3 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.953
Grade Unit
g/t
Intercept
3 m
True Width
1.6 m
From
94.5 m
To
97.5 m
Hole Depth
603 m
Intercept Depth
94.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:94.5-97.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow but good-grade intercept, contributing to the overall high-grade core of the Bench Target.

Positive factors

  • Good grade (0.953 g/t Au) for an open-pit gold project.
  • True width is disclosed (1.6m).

Negative factors

  • Narrow intercept length (3.0m).

Evidence · table

“0.953”

Context: 3.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.6

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.489Grade Unit: g/tIntercept: 2.5 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.489
Grade Unit
g/t
Intercept
2.5 m
From
184.5 m
To
187 m
Hole Depth
603 m
Intercept Depth
184.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:184.5-187
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow intercept with a moderate grade, confirming mineralization above the cut-off.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Very narrow intercept length (2.5m).
  • True width is unknown.

Evidence · table

“0.489”

Context: 2.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.204Grade Unit: g/tIntercept: 6 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.204
Grade Unit
g/t
Intercept
6 m
From
295.5 m
To
301.5 m
Hole Depth
603 m
Intercept Depth
295.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:295.5-301.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a very low grade, confirming mineralization above the cut-off.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown.

Evidence · table

“0.204”

Context: 6.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.327Grade Unit: g/tIntercept: 13.5 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.327
Grade Unit
g/t
Intercept
13.5 m
From
322.5 m
To
336 m
Hole Depth
603 m
Intercept Depth
322.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:322.5-336
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a low grade, confirming mineralization above the cut-off.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is relatively low for gold.
  • True width is unknown.

Evidence · table

“0.327”

Context: 13.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.632Grade Unit: g/tIntercept: 7.5 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.632
Grade Unit
g/t
Intercept
7.5 m
From
357 m
To
364.5 m
Hole Depth
603 m
Intercept Depth
357 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:357-364.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a good grade, confirming mineralization.

Positive factors

  • Good grade (0.632 g/t Au) for an open-pit gold project.

Negative factors

  • Narrow intercept length (7.5m).
  • True width is unknown.

Evidence · table

“0.632”

Context: 7.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.841Grade Unit: g/tIntercept: 7.5 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.841
Grade Unit
g/t
Intercept
7.5 m
From
373.5 m
To
381 m
Hole Depth
603 m
Intercept Depth
373.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:373.5-381
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a good grade, confirming mineralization.

Positive factors

  • Good grade (0.841 g/t Au) for an open-pit gold project.

Negative factors

  • Narrow intercept length (7.5m).
  • True width is unknown.

Evidence · table

“0.841”

Context: 7.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.376Grade Unit: g/tIntercept: 121.5 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.376
Grade Unit
g/t
Intercept
121.5 m
From
465 m
To
586.5 m
Hole Depth
603 m
Intercept Depth
465 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:465-586.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: The headline intercept, representing a significant step-out discovery with very good width, though the grade is moderate. This is a key exploration success.

Positive factors

  • Very long intercept length (121.5m) with continuous mineralization.
  • Represents a significant new target located 200 metres east of the current resource pit limit, extending mineralization.
  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is relatively low for gold.
  • True width is unknown, which may overstate actual thickness.

Evidence · table

“0.376”

Context: 121.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 0.42Grade Unit: g/tIntercept: 18 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.42
Grade Unit
g/t
Intercept
18 m
From
514.5 m
To
532.5 m
Hole Depth
603 m
Intercept Depth
514.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:514.5-532.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A moderate width intercept with a low grade, part of the new target discovery.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is relatively low for gold.
  • True width is unknown.

Evidence · table

“0.420”

Context: 18.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-205Tower Mountain · goldGrade: 1.283Grade Unit: g/tIntercept: 13.5 mView all details
Link to this fact

Identity

Hole ID
TM26-205
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
1.283
Grade Unit
g/t
Intercept
13.5 m
From
555 m
To
568.5 m
Hole Depth
603 m
Intercept Depth
555 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-205:555-568.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300901
Northing
5377465
Elevation
494 m
Azimuth
71 °
Dip
-44.5 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow but high-grade intercept, part of the new target discovery, indicating higher-grade zones within the broader mineralization.

Positive factors

  • Strong grade (1.283 g/t Au) for an open-pit gold project.

Negative factors

  • Narrow intercept length (13.5m).
  • True width is unknown.

Evidence · table

“1.283”

Context: 13.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-206Tower Mountain · goldGrade: 0.191Grade Unit: g/tIntercept: 7.5 mView all details
Link to this fact

Identity

Hole ID
TM26-206
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.191
Grade Unit
g/t
Intercept
7.5 m
From
27 m
To
34.5 m
Hole Depth
399 m
Intercept Depth
27 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-206:27-34.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
301034
Northing
5377593
Elevation
494 m
Azimuth
40 °
Dip
-44.6 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a very low grade, confirming mineralization just above the cut-off.

Positive factors

  • Grade is marginally above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is extremely low, barely above cut-off.
  • True width is unknown.

Evidence · table

“0.191”

Context: 7.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-206Tower Mountain · goldGrade: 1.04Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-206
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
1.04
Grade Unit
g/t
Intercept
1.5 m
From
172.5 m
To
174 m
Hole Depth
399 m
Intercept Depth
172.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-206:172.5-174
Mining Method
open_pit

Location

Location
Bench Target
Easting
301034
Northing
5377593
Elevation
494 m
Azimuth
40 °
Dip
-44.6 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow but good-grade intercept, indicating localized higher-grade mineralization.

Positive factors

  • Good grade (1.04 g/t Au) for an open-pit gold project.

Negative factors

  • Very narrow intercept length (1.5m).
  • True width is unknown.

Evidence · table

“1.040”

Context: 1.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-206Tower Mountain · goldGrade: 0.209Grade Unit: g/tIntercept: 6 mView all details
Link to this fact

Identity

Hole ID
TM26-206
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.209
Grade Unit
g/t
Intercept
6 m
From
258 m
To
264 m
Hole Depth
399 m
Intercept Depth
258 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-206:258-264
Mining Method
open_pit

Location

Location
Bench Target
Easting
301034
Northing
5377593
Elevation
494 m
Azimuth
40 °
Dip
-44.6 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a very low grade, confirming mineralization just above the cut-off.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown.

Evidence · table

“0.209”

Context: 6.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-206Tower Mountain · goldGrade: 0.197Grade Unit: g/tIntercept: 5.5 mView all details
Link to this fact

Identity

Hole ID
TM26-206
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.197
Grade Unit
g/t
Intercept
5.5 m
From
342 m
To
347.5 m
Hole Depth
399 m
Intercept Depth
342 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-206:342-347.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
301034
Northing
5377593
Elevation
494 m
Azimuth
40 °
Dip
-44.6 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a very low grade, confirming mineralization just above the cut-off.

Positive factors

  • Grade is marginally above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is extremely low, barely above cut-off.
  • True width is unknown.

Evidence · table

“0.197”

Context: 5.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-207Tower Mountain · goldGrade: 0.341Grade Unit: g/tIntercept: 43.5 mView all details
Link to this fact

Identity

Hole ID
TM26-207
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.341
Grade Unit
g/t
Intercept
43.5 m
True Width
28.4 m
From
4.5 m
To
48 m
Hole Depth
48 m
Intercept Depth
4.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-207:4.5-48
Mining Method
open_pit

Location

Location
Bench Target
Easting
300820
Northing
5377578
Elevation
463 m
Azimuth
45 °
Dip
-44 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width, near-surface intercept with a low-moderate grade, confirming mineralization and contributing to the overall positive results.

Positive factors

  • Good intercept length (43.5m) with grade above cut-off.
  • True width is disclosed (28.4m), confirming significant thickness.
  • Near surface intercept, favorable for open-pit mining.

Negative factors

  • Grade is relatively low for gold.

Evidence · table

“0.341”

Context: 43.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 28.4

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-207ATower Mountain · goldGrade: 0.332Grade Unit: g/tIntercept: 82.5 mView all details
Link to this fact

Identity

Hole ID
TM26-207A
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.332
Grade Unit
g/t
Intercept
82.5 m
True Width
53.8 m
From
2.8 m
To
85.3 m
Hole Depth
600 m
Intercept Depth
2.8 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-207A:2.8-85.3
Mining Method
open_pit

Location

Location
Bench Target
Easting
300820.3
Northing
5377578.3
Elevation
463 m
Azimuth
45 °
Dip
-44 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: An excellent, wide, near-surface intercept with a low-moderate grade, confirming mineralization and providing good correlation as a twinned hole.

Positive factors

  • Very good intercept length (82.5m) with grade above cut-off.
  • True width is disclosed (53.8m), confirming significant thickness.
  • Near surface intercept, favorable for open-pit mining.
  • Twinned hole result, indicating good correlation with TM26-207.

Negative factors

  • Grade is relatively low for gold.

Evidence · table

“0.332”

Context: 82.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 53.8

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-207ATower Mountain · goldGrade: 0.32Grade Unit: g/tIntercept: 42.2 mView all details
Link to this fact

Identity

Hole ID
TM26-207A
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.32
Grade Unit
g/t
Intercept
42.2 m
True Width
27.5 m
From
2.8 m
To
45 m
Hole Depth
600 m
Intercept Depth
2.8 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-207A:2.8-45
Mining Method
open_pit

Location

Location
Bench Target
Easting
300820.3
Northing
5377578.3
Elevation
463 m
Azimuth
45 °
Dip
-44 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width, near-surface intercept with a low-moderate grade, confirming mineralization.

Positive factors

  • Good intercept length (42.2m) with grade above cut-off.
  • True width is disclosed (27.5m), confirming significant thickness.
  • Near surface intercept, favorable for open-pit mining.

Negative factors

  • Grade is relatively low for gold.

Evidence · table

“0.320”

Context: 42.2

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 27.5

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-207ATower Mountain · goldGrade: 1.05Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-207A
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
1.05
Grade Unit
g/t
Intercept
1.5 m
True Width
1 m
From
43.5 m
To
45 m
Hole Depth
600 m
Intercept Depth
43.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-207A:43.5-45
Mining Method
open_pit

Location

Location
Bench Target
Easting
300820.3
Northing
5377578.3
Elevation
463 m
Azimuth
45 °
Dip
-44 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow but good-grade intercept, indicating localized higher-grade mineralization.

Positive factors

  • Good grade (1.05 g/t Au) for an open-pit gold project.
  • True width is disclosed (1.0m).

Negative factors

  • Very narrow intercept length (1.5m).

Evidence · table

“1.050”

Context: 1.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-207ATower Mountain · goldGrade: 2.21Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-207A
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
2.21
Grade Unit
g/t
Intercept
1.5 m
True Width
1 m
From
49.5 m
To
51 m
Hole Depth
600 m
Intercept Depth
49.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-207A:49.5-51
Mining Method
open_pit

Location

Location
Bench Target
Easting
300820.3
Northing
5377578.3
Elevation
463 m
Azimuth
45 °
Dip
-44 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow but strong-grade intercept, indicating localized higher-grade mineralization.

Positive factors

  • Strong grade (2.21 g/t Au) for an open-pit gold project.
  • True width is disclosed (1.0m).

Negative factors

  • Very narrow intercept length (1.5m).

Evidence · table

“2.210”

Context: 1.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-207ATower Mountain · goldGrade: 0.351Grade Unit: g/tIntercept: 24.2 mView all details
Link to this fact

Identity

Hole ID
TM26-207A
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.351
Grade Unit
g/t
Intercept
24.2 m
From
85.3 m
To
109.5 m
Hole Depth
600 m
Intercept Depth
85.3 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-207A:85.3-109.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300820.3
Northing
5377578.3
Elevation
463 m
Azimuth
45 °
Dip
-44 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width intercept with a low-moderate grade, confirming mineralization.

Positive factors

  • Good intercept length (24.2m) with grade above cut-off.

Negative factors

  • Grade is relatively low for gold.
  • True width is unknown.

Evidence · table

“0.351”

Context: 24.2

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-208Tower Mountain · goldGrade: 1.01Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-208
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
1.01
Grade Unit
g/t
Intercept
1.5 m
From
354 m
To
355.5 m
Hole Depth
501 m
Intercept Depth
354 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-208:354-355.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
301351
Northing
5377825
Elevation
476 m
Azimuth
247 °
Dip
-44.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow but good-grade intercept, indicating localized higher-grade mineralization.

Positive factors

  • Good grade (1.01 g/t Au) for an open-pit gold project.

Negative factors

  • Very narrow intercept length (1.5m).
  • True width is unknown.

Evidence · table

“1.010”

Context: 1.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-208Tower Mountain · goldGrade: 7.22Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-208
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
7.22
Grade Unit
g/t
Intercept
1.5 m
From
432 m
To
433.5 m
Hole Depth
501 m
Intercept Depth
432 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-208:432-433.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
301351
Northing
5377825
Elevation
476 m
Azimuth
247 °
Dip
-44.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow but exceptional-grade intercept, indicating localized bonanza-grade mineralization.

Positive factors

  • Exceptional grade (7.22 g/t Au) for an open-pit gold project.

Negative factors

  • Very narrow intercept length (1.5m).
  • True width is unknown.

Evidence · table

“7.220”

Context: 1.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-208Tower Mountain · goldGrade: 2.09Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-208
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
2.09
Grade Unit
g/t
Intercept
1.5 m
From
448.5 m
To
450 m
Hole Depth
501 m
Intercept Depth
448.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-208:448.5-450
Mining Method
open_pit

Location

Location
Bench Target
Easting
301351
Northing
5377825
Elevation
476 m
Azimuth
247 °
Dip
-44.3 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow but strong-grade intercept, indicating localized higher-grade mineralization.

Positive factors

  • Strong grade (2.09 g/t Au) for an open-pit gold project.

Negative factors

  • Very narrow intercept length (1.5m).
  • True width is unknown.

Evidence · table

“2.090”

Context: 1.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-209Tower Mountain · goldGrade: 0.304Grade Unit: g/tIntercept: 4.5 mView all details
Link to this fact

Identity

Hole ID
TM26-209
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.304
Grade Unit
g/t
Intercept
4.5 m
From
171 m
To
175.5 m
Hole Depth
600 m
Intercept Depth
171 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-209:171-175.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
301108
Northing
5377711
Elevation
512 m
Azimuth
310 °
Dip
-54.7 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a low grade, confirming mineralization above the cut-off.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Narrow intercept length (4.5m).
  • True width is unknown.

Evidence · table

“0.304”

Context: 4.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.195Grade Unit: g/tIntercept: 589 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.195
Grade Unit
g/t
Intercept
589 m
From
4 m
To
593 m
Hole Depth
593 m
Intercept Depth
4 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:4-593
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: An exceptionally long intercept confirming widespread, continuous, albeit very low-grade, mineralization, extending the trend significantly.

Positive factors

  • Exceptional intercept length (589.0m) with semi-continuous gold mineralization from surface to end-of-hole.
  • Extends mineralization to the southeast through an area of sparse drill coverage.
  • Grade is marginally above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is extremely low, barely above cut-off.
  • True width is unknown, which may overstate actual thickness.

Evidence · table

“0.195”

Context: 589.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.223Grade Unit: g/tIntercept: 287.7 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.223
Grade Unit
g/t
Intercept
287.7 m
From
4 m
To
291.7 m
Hole Depth
593 m
Intercept Depth
4 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:4-291.7
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: An exceptionally long intercept confirming widespread, continuous, albeit very low-grade, mineralization, extending the trend significantly.

Positive factors

  • Exceptional intercept length (287.7m) with continuous mineralization.
  • Extends mineralization to the southeast through an area of sparse drill coverage.
  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown, which may overstate actual thickness.

Evidence · table

“0.223”

Context: 287.7

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.567Grade Unit: g/tIntercept: 21 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.567
Grade Unit
g/t
Intercept
21 m
From
30 m
To
51 m
Hole Depth
593 m
Intercept Depth
30 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:30-51
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width intercept with a good grade, contributing to the overall mineralization in TM26-213.

Positive factors

  • Good intercept length (21.0m) with good grade (0.567 g/t Au) for an open-pit gold project.

Negative factors

  • True width is unknown.

Evidence · table

“0.567”

Context: 21.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.419Grade Unit: g/tIntercept: 42 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.419
Grade Unit
g/t
Intercept
42 m
From
69 m
To
111 m
Hole Depth
593 m
Intercept Depth
69 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:69-111
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width intercept with a low-moderate grade, contributing to the overall mineralization in TM26-213.

Positive factors

  • Good intercept length (42.0m) with grade above cut-off.

Negative factors

  • Grade is relatively low for gold.
  • True width is unknown.

Evidence · table

“0.419”

Context: 42.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.8Grade Unit: g/tIntercept: 8.9 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.8
Grade Unit
g/t
Intercept
8.9 m
From
242.6 m
To
251.5 m
Hole Depth
593 m
Intercept Depth
242.6 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:242.6-251.5
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a good grade, contributing to the overall mineralization in TM26-213.

Positive factors

  • Good grade (0.8 g/t Au) for an open-pit gold project.

Negative factors

  • Narrow intercept length (8.9m).
  • True width is unknown.

Evidence · table

“0.800”

Context: 8.9

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.28Grade Unit: g/tIntercept: 18.7 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.28
Grade Unit
g/t
Intercept
18.7 m
From
273 m
To
291.7 m
Hole Depth
593 m
Intercept Depth
273 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:273-291.7
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A moderate width intercept with a low grade, contributing to the overall mineralization in TM26-213.

Positive factors

  • Moderate intercept length (18.7m) with grade above cut-off.

Negative factors

  • Grade is relatively low for gold.
  • True width is unknown.

Evidence · table

“0.280”

Context: 18.7

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.544Grade Unit: g/tIntercept: 23.1 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.544
Grade Unit
g/t
Intercept
23.1 m
From
291.7 m
To
314.8 m
Hole Depth
593 m
Intercept Depth
291.7 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:291.7-314.8
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A good width intercept with a good grade, contributing to the overall mineralization in TM26-213.

Positive factors

  • Good intercept length (23.1m) with good grade (0.544 g/t Au) for an open-pit gold project.

Negative factors

  • True width is unknown.

Evidence · table

“0.544”

Context: 23.1

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 1.071Grade Unit: g/tIntercept: 7.3 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
1.071
Grade Unit
g/t
Intercept
7.3 m
From
307.5 m
To
314.8 m
Hole Depth
593 m
Intercept Depth
307.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:307.5-314.8
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A narrow intercept with a good grade, contributing to the overall mineralization in TM26-213.

Positive factors

  • Good grade (1.071 g/t Au) for an open-pit gold project.

Negative factors

  • Narrow intercept length (7.3m).
  • True width is unknown.

Evidence · table

“1.071”

Context: 7.3

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.255Grade Unit: g/tIntercept: 64.5 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.255
Grade Unit
g/t
Intercept
64.5 m
From
314.8 m
To
379.3 m
Hole Depth
593 m
Intercept Depth
314.8 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:314.8-379.3
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very good width intercept with a very low grade, indicating potential resource expansion at the pit limit.

Positive factors

  • Very good intercept length (64.5m) with grade above cut-off.
  • Observed at the current pit limit, suggesting potential to expand the resource.

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown.

Evidence · table

“0.255”

Context: 64.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.23Grade Unit: g/tIntercept: 17.7 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.23
Grade Unit
g/t
Intercept
17.7 m
From
449.3 m
To
467 m
Hole Depth
593 m
Intercept Depth
449.3 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:449.3-467
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A moderate width intercept with a very low grade, confirming mineralization.

Positive factors

  • Moderate intercept length (17.7m) with grade above cut-off.

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown.

Evidence · table

“0.230”

Context: 17.7

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.222Grade Unit: g/tIntercept: 15.7 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.222
Grade Unit
g/t
Intercept
15.7 m
From
539.3 m
To
555 m
Hole Depth
593 m
Intercept Depth
539.3 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:539.3-555
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A moderate width intercept with a very low grade, confirming mineralization.

Positive factors

  • Moderate intercept length (15.7m) with grade above cut-off.

Negative factors

  • Grade is very low, just above the cut-off.
  • True width is unknown.

Evidence · table

“0.222”

Context: 15.7

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

TM26-213Tower Mountain · goldGrade: 0.409Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
TM26-213
Project
Tower Mountain
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
TGOL.V

Geometry

Grade
0.409
Grade Unit
g/t
Intercept
1.5 m
From
591.5 m
To
593 m
Hole Depth
593 m
Intercept Depth
591.5 m

Classification

Program
exploration
Sample Type
drill
Group ID
TM26-213:591.5-593
Mining Method
open_pit

Location

Location
Bench Target
Easting
300975
Northing
5377253.5
Elevation
521 m
Azimuth
135 °
Dip
-44.8 °
Loc. Confidence
high
Loc. Source
document

QA/QC

Laboratory
Activation Laboratories Ltd., Thunder Bay, Ontario and AGAT Laboratories, Thunder Bay, Ontario
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Compositing

Cutoff Grade
0.19
Cutoff Unit
g/t

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very narrow intercept with a low-moderate grade, confirming mineralization at the end of the hole.

Positive factors

  • Grade is above the resource cut-off grade (0.19 g/t Au).

Negative factors

  • Very narrow intercept length (1.5m).
  • True width is unknown.

Evidence · table

“0.409”

Context: 1.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Resource Estimates (2)

indicatedTower Mountain Project · goldTonnes: 34500000Grade: 0.46Grade Unit: g/tContained Metal: 514Contained Unit: kozView all details
Link to this fact

Identity

Project
Tower Mountain Project
Commodity
gold
Region
canada_on
Reported Region
Ontario
Ticker
TGOL.V

Resource scope

Estimate type
resource
Effective date
2026-01-19T00:00:00.000Z
Reporting standards
ni_43_101
QP Signed
Yes
Qualified person names
William Lewis, Charley Murahwi, Tudorel Ciuculescu
Resource group id
resource:a2415c19266a319945a2
Mining method
open_pit
Ownership percent
100 %

Resource Data

Category
indicated
Tonnes
34500000
Grade
0.46
Grade Unit
g/t
Contained Metal
514
Contained Unit
koz
Cutoff Grade
0.19
Cutoff Unit
g/t

Prior Estimate

Resource Date
2026-01-19

Review

Needs Review
No
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A well-defined Indicated resource with significant tonnage, though at a low grade, supporting the project's open-pit potential. This is a restatement of a prior estimate.

Positive factors

  • Resource is reported under NI 43-101 standards with QP sign-off.
  • Indicated category provides reasonable geological confidence.
  • Low cut-off grade (0.19 g/t Au) supports bulk tonnage potential.

Negative factors

  • Grade is relatively low for gold (0.46 g/t Au).

Evidence · table

“34.5”

Context: Indicated

Tags used in scoring

Indicated Resourcepositive

Reasonable geological confidence based on adequate drilling; continuity can be assumed. Basis for Probable Reserves.

Why it applies: category is "indicated"

Cut-off Disclosedpositive

Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff_grade is stated

QP/CP Signedpositive

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: qp_signed is true

NI 43-101 Compliantpositive

Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.

Why it applies: reporting_standards includes ni_43_101

Resource Updateneutral

Revised estimate for an existing resource — compare to prior to assess progress.

Why it applies: the release compares against a previous estimate

inferredTower Mountain Project · goldTonnes: 211100000Grade: 0.45Grade Unit: g/tContained Metal: 3053Contained Unit: kozView all details
Link to this fact

Identity

Project
Tower Mountain Project
Commodity
gold
Region
canada_on
Reported Region
Ontario
Ticker
TGOL.V

Resource scope

Estimate type
resource
Effective date
2026-01-19T00:00:00.000Z
Reporting standards
ni_43_101
QP Signed
Yes
Qualified person names
William Lewis, Charley Murahwi, Tudorel Ciuculescu
Resource group id
resource:78876e3b16c3e5d74542
Mining method
open_pit
Ownership percent
100 %

Resource Data

Category
inferred
Tonnes
211100000
Grade
0.45
Grade Unit
g/t
Contained Metal
3053
Contained Unit
koz
Cutoff Grade
0.19
Cutoff Unit
g/t

Prior Estimate

Resource Date
2026-01-19

Review

Needs Review
No
Historical
No

Dates

Event date
2026-09-17T00:00:00.000Z

Reasoning: A very large Inferred resource with significant contained metal, indicating substantial exploration upside, though at a low grade and with lower confidence. This is a restatement of a prior estimate.

Positive factors

  • Very large tonnage (211.1 Mt) in the Inferred category, indicating significant exploration potential.
  • Resource is reported under NI 43-101 standards with QP sign-off.
  • Low cut-off grade (0.19 g/t Au) supports bulk tonnage potential.

Negative factors

  • Grade is relatively low for gold (0.45 g/t Au).
  • Inferred category has lower geological confidence and cannot support economic studies alone.

Evidence · table

“211.1”

Context: Inferred

Tags used in scoring

Inferred Resourcenegative

Speculative category — limited drilling, geological continuity assumed but not confirmed. Cannot support economic studies alone.

Why it applies: category is "inferred"

Cut-off Disclosedpositive

Cut-off grade used for resource reporting is clearly stated, enabling like-for-like comparison.

Why it applies: cutoff_grade is stated

QP/CP Signedpositive

Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.

Why it applies: qp_signed is true

NI 43-101 Compliantpositive

Resource estimate prepared in compliance with NI 43-101 (Canada) — high reporting standard.

Why it applies: reporting_standards includes ni_43_101

Resource Updateneutral

Revised estimate for an existing resource — compare to prior to assess progress.

Why it applies: the release compares against a previous estimate

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.