Total Metals Reports Positive Results at its Electrolode Critical Metals Project - Including High-Grade intercepts up to 38.20% Zinc over 0.42m and 3.59% Copper over 1.91m
Original announcement by tmx on
- Company
- Total Metals Corp.
- Ticker
- TT
- Exchange
- TSX
- Region
- Northwestern Ontario
- Primary commodity
- Zinc
- Secondary commodities
- Copper, Gold, Silver, Gallium, Indium
- Document categories
- Drill results, Resource update
- Extracted
- 2026-09-17 02:46:32 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Total Metals Corp. announced positive drill results from its winter 2026 program at the Electrolode Critical Metals Project in Northwestern Ontario. Several intercepts in the Arrow Zone and its hanging wall returned high-grade zinc and copper, with subintervals reaching up to 38.20% Zinc over 0.42m and 3.59% Copper over 1.91m, significantly exceeding the project's current inferred resource grades. The company also noted elevated gallium and indium values, indicating potential for additional critical metals, and confirmed robust QA/QC procedures.
Reasoning: The announcement reports new high-grade drill results for zinc and copper from the Electrolode project, with several intercepts significantly exceeding the existing inferred resource grades. The presence of elevated gallium and indium adds potential value. Strong QA/QC procedures support the results. While some targets were downgraded, the overall results are highly positive for the project's potential.
Positive factors
- High-grade zinc and copper intercepts significantly exceed the existing resource grade.
- Discovery of a highly mineralized zone in the hanging wall with significant copper values.
- Elevated gallium and indium values indicate potential for additional critical metals.
- Comprehensive QA/QC procedures including certified lab, standards, blanks, and third-party verification.
Negative factors
- True thickness is estimated, not precisely measured for all intercepts.
- Garnet Zone drilling downgraded potential for continuity with Arrow Zone.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 141
Extracted facts
Stored fact records: 141. Some facts used in scoring do not have a stored record.
Drill Results (141)
EL-26-002Electrolode Critical Metals · zincGrade: 0.91Grade Unit: %Intercept: 2.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.91
- Grade Unit
- %
- Intercept
- 2.55 m
- True Width
- 2.04 m
- From
- 335.25 m
- To
- 337.8 m
- Hole Depth
- 405 m
- Intercept Depth
- 335.25 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:335.25-337.8
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade zinc intercept in the hanging wall zone.
Evidence · table
“0.91”
Context: 2.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · copperGrade: 0.02Grade Unit: %Intercept: 2.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.55 m
- True Width
- 2.04 m
- From
- 335.25 m
- To
- 337.8 m
- Hole Depth
- 405 m
- Intercept Depth
- 335.25 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:335.25-337.8
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade copper intercept in the hanging wall zone.
Evidence · table
“0.02”
Context: 2.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · goldGrade: 0.16Grade Unit: g/tIntercept: 2.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.16
- Grade Unit
- g/t
- Intercept
- 2.55 m
- True Width
- 2.04 m
- From
- 335.25 m
- To
- 337.8 m
- Hole Depth
- 405 m
- Intercept Depth
- 335.25 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:335.25-337.8
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.16”
Context: 2.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · silverGrade: 24.93Grade Unit: g/tIntercept: 2.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 24.93
- Grade Unit
- g/t
- Intercept
- 2.55 m
- True Width
- 2.04 m
- From
- 335.25 m
- To
- 337.8 m
- Hole Depth
- 405 m
- Intercept Depth
- 335.25 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:335.25-337.8
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the hanging wall zone.
Evidence · table
“24.93”
Context: 2.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · galliumGrade: 49.14Grade Unit: ppmIntercept: 2.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 49.14
- Grade Unit
- ppm
- Intercept
- 2.55 m
- True Width
- 2.04 m
- From
- 335.25 m
- To
- 337.8 m
- Hole Depth
- 405 m
- Intercept Depth
- 335.25 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:335.25-337.8
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“49.14”
Context: 2.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · indiumGrade: 0.34Grade Unit: ppmIntercept: 2.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.34
- Grade Unit
- ppm
- Intercept
- 2.55 m
- True Width
- 2.04 m
- From
- 335.25 m
- To
- 337.8 m
- Hole Depth
- 405 m
- Intercept Depth
- 335.25 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:335.25-337.8
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“0.34”
Context: 2.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.04
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · zincGrade: 0.95Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.95
- Grade Unit
- %
- Intercept
- 1.9 m
- True Width
- 1.52 m
- From
- 369 m
- To
- 370.9 m
- Hole Depth
- 405 m
- Intercept Depth
- 369 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:369-370.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade zinc intercept in the hanging wall zone.
Evidence · table
“0.95”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · copperGrade: 0.09Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 1.9 m
- True Width
- 1.52 m
- From
- 369 m
- To
- 370.9 m
- Hole Depth
- 405 m
- Intercept Depth
- 369 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:369-370.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade copper intercept in the hanging wall zone.
Evidence · table
“0.09”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · goldGrade: 0.03Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 1.9 m
- True Width
- 1.52 m
- From
- 369 m
- To
- 370.9 m
- Hole Depth
- 405 m
- Intercept Depth
- 369 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:369-370.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.03”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · silverGrade: 1.21Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.21
- Grade Unit
- g/t
- Intercept
- 1.9 m
- True Width
- 1.52 m
- From
- 369 m
- To
- 370.9 m
- Hole Depth
- 405 m
- Intercept Depth
- 369 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:369-370.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the hanging wall zone.
Evidence · table
“1.21”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · galliumGrade: 80.06Grade Unit: ppmIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 80.06
- Grade Unit
- ppm
- Intercept
- 1.9 m
- True Width
- 1.52 m
- From
- 369 m
- To
- 370.9 m
- Hole Depth
- 405 m
- Intercept Depth
- 369 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:369-370.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“80.06”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · indiumGrade: 4.99Grade Unit: ppmIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 4.99
- Grade Unit
- ppm
- Intercept
- 1.9 m
- True Width
- 1.52 m
- From
- 369 m
- To
- 370.9 m
- Hole Depth
- 405 m
- Intercept Depth
- 369 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:369-370.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“4.99”
Context: 1.90
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.52
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · zincGrade: 5.1Grade Unit: %Intercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 5.1
- Grade Unit
- %
- Intercept
- 4.55 m
- True Width
- 3.64 m
- From
- 374.85 m
- To
- 379.4 m
- Hole Depth
- 405 m
- Intercept Depth
- 374.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:374.85-379.4
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Significant zinc intercept in the Arrow Zone, exceeding the average resource grade.
Positive factors
- Strong zinc grade for VMS deposit.
Evidence · table
“5.10”
Context: 4.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · copperGrade: 0.5Grade Unit: %Intercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 4.55 m
- True Width
- 3.64 m
- From
- 374.85 m
- To
- 379.4 m
- Hole Depth
- 405 m
- Intercept Depth
- 374.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:374.85-379.4
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate copper intercept in the Arrow Zone.
Positive factors
- Moderate copper grade for VMS deposit.
Evidence · table
“0.50”
Context: 4.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · goldGrade: 0.41Grade Unit: g/tIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 4.55 m
- True Width
- 3.64 m
- From
- 374.85 m
- To
- 379.4 m
- Hole Depth
- 405 m
- Intercept Depth
- 374.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:374.85-379.4
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the Arrow Zone.
Evidence · table
“0.41”
Context: 4.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · silverGrade: 18.21Grade Unit: g/tIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 18.21
- Grade Unit
- g/t
- Intercept
- 4.55 m
- True Width
- 3.64 m
- From
- 374.85 m
- To
- 379.4 m
- Hole Depth
- 405 m
- Intercept Depth
- 374.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:374.85-379.4
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the Arrow Zone.
Evidence · table
“18.21”
Context: 4.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · galliumGrade: 71.11Grade Unit: ppmIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 71.11
- Grade Unit
- ppm
- Intercept
- 4.55 m
- True Width
- 3.64 m
- From
- 374.85 m
- To
- 379.4 m
- Hole Depth
- 405 m
- Intercept Depth
- 374.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:374.85-379.4
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“71.11”
Context: 4.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-002Electrolode Critical Metals · indiumGrade: 40.15Grade Unit: ppmIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- EL-26-002
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 40.15
- Grade Unit
- ppm
- Intercept
- 4.55 m
- True Width
- 3.64 m
- From
- 374.85 m
- To
- 379.4 m
- Hole Depth
- 405 m
- Intercept Depth
- 374.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-002:374.85-379.4
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512588
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.5 m
- Azimuth
- 135 °
- Dip
- -70 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“40.15”
Context: 4.55
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.64
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · zincGrade: 1.13Grade Unit: %Intercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.13
- Grade Unit
- %
- Intercept
- 0.86 m
- True Width
- 0.688 m
- From
- 330.14 m
- To
- 331 m
- Hole Depth
- 387 m
- Intercept Depth
- 330.14 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:330.14-331
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade zinc intercept in the hanging wall zone.
Evidence · table
“1.13”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.688
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · copperGrade: 0.19Grade Unit: %Intercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.19
- Grade Unit
- %
- Intercept
- 0.86 m
- True Width
- 0.688 m
- From
- 330.14 m
- To
- 331 m
- Hole Depth
- 387 m
- Intercept Depth
- 330.14 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:330.14-331
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade copper intercept in the hanging wall zone.
Evidence · table
“0.19”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.688
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · goldGrade: 0.1Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 0.86 m
- True Width
- 0.688 m
- From
- 330.14 m
- To
- 331 m
- Hole Depth
- 387 m
- Intercept Depth
- 330.14 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:330.14-331
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.10”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.688
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · silverGrade: 5.03Grade Unit: g/tIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 5.03
- Grade Unit
- g/t
- Intercept
- 0.86 m
- True Width
- 0.688 m
- From
- 330.14 m
- To
- 331 m
- Hole Depth
- 387 m
- Intercept Depth
- 330.14 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:330.14-331
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the hanging wall zone.
Evidence · table
“5.03”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.688
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · galliumGrade: 63.3Grade Unit: ppmIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 63.3
- Grade Unit
- ppm
- Intercept
- 0.86 m
- True Width
- 0.688 m
- From
- 330.14 m
- To
- 331 m
- Hole Depth
- 387 m
- Intercept Depth
- 330.14 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:330.14-331
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“63.30”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.688
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · indiumGrade: 16.2Grade Unit: ppmIntercept: 0.86 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 16.2
- Grade Unit
- ppm
- Intercept
- 0.86 m
- True Width
- 0.688 m
- From
- 330.14 m
- To
- 331 m
- Hole Depth
- 387 m
- Intercept Depth
- 330.14 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:330.14-331
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“16.20”
Context: 0.86
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.688
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · zincGrade: 7Grade Unit: %Intercept: 7.18 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 7
- Grade Unit
- %
- Intercept
- 7.18 m
- True Width
- 5.744 m
- From
- 341 m
- To
- 348.18 m
- Hole Depth
- 387 m
- Intercept Depth
- 341 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:341-348.18
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Significant zinc intercept in the Arrow Zone, exceeding the average resource grade over a good length.
Positive factors
- Strong zinc grade for VMS deposit.
- Good intercept length.
Evidence · table
“7.00”
Context: 7.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.744
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · copperGrade: 0.47Grade Unit: %Intercept: 7.18 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.47
- Grade Unit
- %
- Intercept
- 7.18 m
- True Width
- 5.744 m
- From
- 341 m
- To
- 348.18 m
- Hole Depth
- 387 m
- Intercept Depth
- 341 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:341-348.18
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate copper intercept in the Arrow Zone.
Positive factors
- Moderate copper grade for VMS deposit.
Evidence · table
“0.47”
Context: 7.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.744
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · goldGrade: 0.25Grade Unit: g/tIntercept: 7.18 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 7.18 m
- True Width
- 5.744 m
- From
- 341 m
- To
- 348.18 m
- Hole Depth
- 387 m
- Intercept Depth
- 341 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:341-348.18
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the Arrow Zone.
Evidence · table
“0.25”
Context: 7.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.744
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · silverGrade: 32.73Grade Unit: g/tIntercept: 7.18 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 32.73
- Grade Unit
- g/t
- Intercept
- 7.18 m
- True Width
- 5.744 m
- From
- 341 m
- To
- 348.18 m
- Hole Depth
- 387 m
- Intercept Depth
- 341 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:341-348.18
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the Arrow Zone.
Evidence · table
“32.73”
Context: 7.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.744
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · galliumGrade: 83.29Grade Unit: ppmIntercept: 7.18 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 83.29
- Grade Unit
- ppm
- Intercept
- 7.18 m
- True Width
- 5.744 m
- From
- 341 m
- To
- 348.18 m
- Hole Depth
- 387 m
- Intercept Depth
- 341 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:341-348.18
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“83.29”
Context: 7.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.744
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · indiumGrade: 23.78Grade Unit: ppmIntercept: 7.18 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 23.78
- Grade Unit
- ppm
- Intercept
- 7.18 m
- True Width
- 5.744 m
- From
- 341 m
- To
- 348.18 m
- Hole Depth
- 387 m
- Intercept Depth
- 341 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:341-348.18
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“23.78”
Context: 7.18
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 5.744
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · zincGrade: 20.14Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 20.14
- Grade Unit
- %
- Intercept
- 1.7 m
- True Width
- 1.36 m
- From
- 342.8 m
- To
- 344.5 m
- Hole Depth
- 387 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:342.8-344.5
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Exceptional high-grade zinc intercept in the Arrow Zone, significantly above the average resource grade.
Positive factors
- Exceptional zinc grade for VMS deposit.
- Bonanza Intercept
Evidence · table
“20.14”
Context: 1.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.36
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · copperGrade: 0.89Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.89
- Grade Unit
- %
- Intercept
- 1.7 m
- True Width
- 1.36 m
- From
- 342.8 m
- To
- 344.5 m
- Hole Depth
- 387 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:342.8-344.5
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate copper intercept in the Arrow Zone.
Positive factors
- Moderate copper grade for VMS deposit.
Evidence · table
“0.89”
Context: 1.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.36
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · goldGrade: 0.37Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.36 m
- From
- 342.8 m
- To
- 344.5 m
- Hole Depth
- 387 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:342.8-344.5
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the Arrow Zone.
Evidence · table
“0.37”
Context: 1.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.36
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · silverGrade: 112.29Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 112.29
- Grade Unit
- g/t
- Intercept
- 1.7 m
- True Width
- 1.36 m
- From
- 342.8 m
- To
- 344.5 m
- Hole Depth
- 387 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:342.8-344.5
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate silver intercept in the Arrow Zone.
Positive factors
- Moderate silver grade for VMS deposit.
Evidence · table
“112.29”
Context: 1.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.36
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · galliumGrade: 105.92Grade Unit: ppmIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 105.92
- Grade Unit
- ppm
- Intercept
- 1.7 m
- True Width
- 1.36 m
- From
- 342.8 m
- To
- 344.5 m
- Hole Depth
- 387 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:342.8-344.5
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“105.92”
Context: 1.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.36
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-003AElectrolode Critical Metals · indiumGrade: 38.58Grade Unit: ppmIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- EL-26-003A
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 38.58
- Grade Unit
- ppm
- Intercept
- 1.7 m
- True Width
- 1.36 m
- From
- 342.8 m
- To
- 344.5 m
- Hole Depth
- 387 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-003A:342.8-344.5
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512589
- Northing
- 5649252
- CRS
- NAD83 / Zone 15
- Elevation
- 402.6 m
- Azimuth
- 134 °
- Dip
- -64 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“38.58”
Context: 1.70
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.36
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · zincGrade: 0.99Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.99
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.2 m
- From
- 348.4 m
- To
- 349.9 m
- Hole Depth
- 411 m
- Intercept Depth
- 348.4 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:348.4-349.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade zinc intercept in the hanging wall zone.
Evidence · table
“0.99”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · copperGrade: 0.26Grade Unit: %Intercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.26
- Grade Unit
- %
- Intercept
- 1.5 m
- True Width
- 1.2 m
- From
- 348.4 m
- To
- 349.9 m
- Hole Depth
- 411 m
- Intercept Depth
- 348.4 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:348.4-349.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade copper intercept in the hanging wall zone.
Evidence · table
“0.26”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · goldGrade: 0.06Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.2 m
- From
- 348.4 m
- To
- 349.9 m
- Hole Depth
- 411 m
- Intercept Depth
- 348.4 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:348.4-349.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.06”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · silverGrade: 2.41Grade Unit: g/tIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 2.41
- Grade Unit
- g/t
- Intercept
- 1.5 m
- True Width
- 1.2 m
- From
- 348.4 m
- To
- 349.9 m
- Hole Depth
- 411 m
- Intercept Depth
- 348.4 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:348.4-349.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the hanging wall zone.
Evidence · table
“2.41”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · galliumGrade: 38.53Grade Unit: ppmIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 38.53
- Grade Unit
- ppm
- Intercept
- 1.5 m
- True Width
- 1.2 m
- From
- 348.4 m
- To
- 349.9 m
- Hole Depth
- 411 m
- Intercept Depth
- 348.4 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:348.4-349.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“38.53”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · indiumGrade: 0.1Grade Unit: ppmIntercept: 1.5 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.1
- Grade Unit
- ppm
- Intercept
- 1.5 m
- True Width
- 1.2 m
- From
- 348.4 m
- To
- 349.9 m
- Hole Depth
- 411 m
- Intercept Depth
- 348.4 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:348.4-349.9
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“0.10”
Context: 1.50
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.2
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · zincGrade: 3.85Grade Unit: %Intercept: 9.75 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 3.85
- Grade Unit
- %
- Intercept
- 9.75 m
- True Width
- 7.8 m
- From
- 371.8 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 371.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:371.8-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate zinc intercept in the Arrow Zone over a good length.
Positive factors
- Moderate zinc grade for VMS deposit.
- Good intercept length.
Evidence · table
“3.85”
Context: 9.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · copperGrade: 0.5Grade Unit: %Intercept: 9.75 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 9.75 m
- True Width
- 7.8 m
- From
- 371.8 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 371.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:371.8-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate copper intercept in the Arrow Zone.
Positive factors
- Moderate copper grade for VMS deposit.
Evidence · table
“0.50”
Context: 9.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · goldGrade: 0.19Grade Unit: g/tIntercept: 9.75 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 9.75 m
- True Width
- 7.8 m
- From
- 371.8 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 371.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:371.8-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the Arrow Zone.
Evidence · table
“0.19”
Context: 9.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · silverGrade: 18.59Grade Unit: g/tIntercept: 9.75 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 18.59
- Grade Unit
- g/t
- Intercept
- 9.75 m
- True Width
- 7.8 m
- From
- 371.8 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 371.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:371.8-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the Arrow Zone.
Evidence · table
“18.59”
Context: 9.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · galliumGrade: 40.9Grade Unit: ppmIntercept: 9.75 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 40.9
- Grade Unit
- ppm
- Intercept
- 9.75 m
- True Width
- 7.8 m
- From
- 371.8 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 371.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:371.8-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“40.90”
Context: 9.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · indiumGrade: 11.45Grade Unit: ppmIntercept: 9.75 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 11.45
- Grade Unit
- ppm
- Intercept
- 9.75 m
- True Width
- 7.8 m
- From
- 371.8 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 371.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:371.8-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“11.45”
Context: 9.75
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 7.8
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · zincGrade: 20.44Grade Unit: %Intercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 20.44
- Grade Unit
- %
- Intercept
- 1.45 m
- True Width
- 1.16 m
- From
- 380.1 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:380.1-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Exceptional high-grade zinc intercept in the Arrow Zone, significantly above the average resource grade.
Positive factors
- Exceptional zinc grade for VMS deposit.
- Bonanza Intercept
Evidence · table
“20.44”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · copperGrade: 0.98Grade Unit: %Intercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 1.45 m
- True Width
- 1.16 m
- From
- 380.1 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:380.1-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate copper intercept in the Arrow Zone.
Positive factors
- Moderate copper grade for VMS deposit.
Evidence · table
“0.98”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · goldGrade: 0.21Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1.45 m
- True Width
- 1.16 m
- From
- 380.1 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:380.1-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the Arrow Zone.
Evidence · table
“0.21”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · silverGrade: 39.07Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 39.07
- Grade Unit
- g/t
- Intercept
- 1.45 m
- True Width
- 1.16 m
- From
- 380.1 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:380.1-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the Arrow Zone.
Evidence · table
“39.07”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · galliumGrade: 66.79Grade Unit: ppmIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 66.79
- Grade Unit
- ppm
- Intercept
- 1.45 m
- True Width
- 1.16 m
- From
- 380.1 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:380.1-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“66.79”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-004Electrolode Critical Metals · indiumGrade: 19.27Grade Unit: ppmIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- EL-26-004
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 19.27
- Grade Unit
- ppm
- Intercept
- 1.45 m
- True Width
- 1.16 m
- From
- 380.1 m
- To
- 381.55 m
- Hole Depth
- 411 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-004:380.1-381.55
- Mining Method
- unknown
Location
- Location
- Arrow
- Easting
- 512531
- Northing
- 5649226
- CRS
- NAD83 / Zone 15
- Elevation
- 402.1 m
- Azimuth
- 133 °
- Dip
- -66 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“19.27”
Context: 1.45
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.16
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-005Electrolode Critical Metals · zincGrade: 2.93Grade Unit: %Intercept: 3.17 mView all detailsHide details
Identity
- Hole ID
- EL-26-005
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 2.93
- Grade Unit
- %
- Intercept
- 3.17 m
- True Width
- 2.536 m
- From
- 88.7 m
- To
- 91.87 m
- Hole Depth
- 120 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-005:88.7-91.87
- Mining Method
- unknown
Location
- Location
- Garnet
- Easting
- 512828
- Northing
- 5649207
- CRS
- NAD83 / Zone 15
- Elevation
- 401 m
- Azimuth
- 139 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate zinc intercept in the Garnet Zone, but overall potential for continuity with Arrow Zone was downgraded.
Positive factors
- Moderate zinc grade for VMS deposit.
Negative factors
- Garnet Zone downgraded potential for continuity with Arrow Zone.
Evidence · table
“2.93”
Context: 3.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.536
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-005Electrolode Critical Metals · copperGrade: 0.05Grade Unit: %Intercept: 3.17 mView all detailsHide details
Identity
- Hole ID
- EL-26-005
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 3.17 m
- True Width
- 2.536 m
- From
- 88.7 m
- To
- 91.87 m
- Hole Depth
- 120 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-005:88.7-91.87
- Mining Method
- unknown
Location
- Location
- Garnet
- Easting
- 512828
- Northing
- 5649207
- CRS
- NAD83 / Zone 15
- Elevation
- 401 m
- Azimuth
- 139 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade copper intercept in the Garnet Zone, but overall potential for continuity with Arrow Zone was downgraded.
Negative factors
- Garnet Zone downgraded potential for continuity with Arrow Zone.
Evidence · table
“0.05”
Context: 3.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.536
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-005Electrolode Critical Metals · goldGrade: 0.03Grade Unit: g/tIntercept: 3.17 mView all detailsHide details
Identity
- Hole ID
- EL-26-005
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 3.17 m
- True Width
- 2.536 m
- From
- 88.7 m
- To
- 91.87 m
- Hole Depth
- 120 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-005:88.7-91.87
- Mining Method
- unknown
Location
- Location
- Garnet
- Easting
- 512828
- Northing
- 5649207
- CRS
- NAD83 / Zone 15
- Elevation
- 401 m
- Azimuth
- 139 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the Garnet Zone, but overall potential for continuity with Arrow Zone was downgraded.
Negative factors
- Garnet Zone downgraded potential for continuity with Arrow Zone.
Evidence · table
“0.03”
Context: 3.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.536
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-005Electrolode Critical Metals · silverGrade: 8.7Grade Unit: g/tIntercept: 3.17 mView all detailsHide details
Identity
- Hole ID
- EL-26-005
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 8.7
- Grade Unit
- g/t
- Intercept
- 3.17 m
- True Width
- 2.536 m
- From
- 88.7 m
- To
- 91.87 m
- Hole Depth
- 120 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-005:88.7-91.87
- Mining Method
- unknown
Location
- Location
- Garnet
- Easting
- 512828
- Northing
- 5649207
- CRS
- NAD83 / Zone 15
- Elevation
- 401 m
- Azimuth
- 139 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the Garnet Zone, but overall potential for continuity with Arrow Zone was downgraded.
Negative factors
- Garnet Zone downgraded potential for continuity with Arrow Zone.
Evidence · table
“8.70”
Context: 3.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.536
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-005Electrolode Critical Metals · galliumGrade: 51.51Grade Unit: ppmIntercept: 3.17 mView all detailsHide details
Identity
- Hole ID
- EL-26-005
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 51.51
- Grade Unit
- ppm
- Intercept
- 3.17 m
- True Width
- 2.536 m
- From
- 88.7 m
- To
- 91.87 m
- Hole Depth
- 120 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-005:88.7-91.87
- Mining Method
- unknown
Location
- Location
- Garnet
- Easting
- 512828
- Northing
- 5649207
- CRS
- NAD83 / Zone 15
- Elevation
- 401 m
- Azimuth
- 139 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value, but overall potential for continuity with Arrow Zone was downgraded.
Negative factors
- Garnet Zone downgraded potential for continuity with Arrow Zone.
Evidence · table
“51.51”
Context: 3.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.536
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-005Electrolode Critical Metals · indiumGrade: 10.45Grade Unit: ppmIntercept: 3.17 mView all detailsHide details
Identity
- Hole ID
- EL-26-005
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 10.45
- Grade Unit
- ppm
- Intercept
- 3.17 m
- True Width
- 2.536 m
- From
- 88.7 m
- To
- 91.87 m
- Hole Depth
- 120 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-005:88.7-91.87
- Mining Method
- unknown
Location
- Location
- Garnet
- Easting
- 512828
- Northing
- 5649207
- CRS
- NAD83 / Zone 15
- Elevation
- 401 m
- Azimuth
- 139 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value, but overall potential for continuity with Arrow Zone was downgraded.
Negative factors
- Garnet Zone downgraded potential for continuity with Arrow Zone.
Evidence · table
“10.45”
Context: 3.17
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 2.536
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · zincGrade: 7.81Grade Unit: %Intercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 7.81
- Grade Unit
- %
- Intercept
- 4.3 m
- True Width
- 3.44 m
- From
- 409.2 m
- To
- 413.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 409.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:409.2-413.5
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Significant zinc intercept in the hanging wall zone.
Positive factors
- Strong zinc grade for VMS deposit.
Evidence · table
“7.81”
Context: 4.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · copperGrade: 1.9Grade Unit: %Intercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.9
- Grade Unit
- %
- Intercept
- 4.3 m
- True Width
- 3.44 m
- From
- 409.2 m
- To
- 413.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 409.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:409.2-413.5
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Strong copper intercept in the hanging wall zone.
Positive factors
- Strong copper grade for VMS deposit.
Evidence · table
“1.90”
Context: 4.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · goldGrade: 0.72Grade Unit: g/tIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.72
- Grade Unit
- g/t
- Intercept
- 4.3 m
- True Width
- 3.44 m
- From
- 409.2 m
- To
- 413.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 409.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:409.2-413.5
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.72”
Context: 4.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · silverGrade: 56.51Grade Unit: g/tIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 56.51
- Grade Unit
- g/t
- Intercept
- 4.3 m
- True Width
- 3.44 m
- From
- 409.2 m
- To
- 413.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 409.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:409.2-413.5
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the hanging wall zone.
Evidence · table
“56.51”
Context: 4.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · galliumGrade: 51.09Grade Unit: ppmIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 51.09
- Grade Unit
- ppm
- Intercept
- 4.3 m
- True Width
- 3.44 m
- From
- 409.2 m
- To
- 413.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 409.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:409.2-413.5
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“51.09”
Context: 4.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · indiumGrade: 9.98Grade Unit: ppmIntercept: 4.3 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 9.98
- Grade Unit
- ppm
- Intercept
- 4.3 m
- True Width
- 3.44 m
- From
- 409.2 m
- To
- 413.5 m
- Hole Depth
- 456 m
- Intercept Depth
- 409.2 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:409.2-413.5
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“9.98”
Context: 4.30
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 3.44
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · zincGrade: 16.91Grade Unit: %Intercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 16.91
- Grade Unit
- %
- Intercept
- 1.91 m
- True Width
- 1.528 m
- From
- 410.8 m
- To
- 412.71 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-412.71
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Exceptional high-grade zinc intercept in the hanging wall zone.
Positive factors
- Exceptional zinc grade for VMS deposit.
- Bonanza Intercept
Evidence · table
“16.91”
Context: 1.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.528
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · copperGrade: 3.59Grade Unit: %Intercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 3.59
- Grade Unit
- %
- Intercept
- 1.91 m
- True Width
- 1.528 m
- From
- 410.8 m
- To
- 412.71 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-412.71
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Exceptional high-grade copper intercept in the hanging wall zone.
Positive factors
- Exceptional copper grade for VMS deposit.
- Bonanza Intercept
Evidence · table
“3.59”
Context: 1.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.528
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · goldGrade: 1.33Grade Unit: g/tIntercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.33
- Grade Unit
- g/t
- Intercept
- 1.91 m
- True Width
- 1.528 m
- From
- 410.8 m
- To
- 412.71 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-412.71
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate gold intercept in the hanging wall zone.
Positive factors
- Moderate gold grade for VMS deposit.
Evidence · table
“1.33”
Context: 1.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.528
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · silverGrade: 116.77Grade Unit: g/tIntercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 116.77
- Grade Unit
- g/t
- Intercept
- 1.91 m
- True Width
- 1.528 m
- From
- 410.8 m
- To
- 412.71 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-412.71
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate silver intercept in the hanging wall zone.
Positive factors
- Moderate silver grade for VMS deposit.
Evidence · table
“116.77”
Context: 1.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.528
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · galliumGrade: 37.03Grade Unit: ppmIntercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 37.03
- Grade Unit
- ppm
- Intercept
- 1.91 m
- True Width
- 1.528 m
- From
- 410.8 m
- To
- 412.71 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-412.71
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“37.03”
Context: 1.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.528
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · indiumGrade: 17.12Grade Unit: ppmIntercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 17.12
- Grade Unit
- ppm
- Intercept
- 1.91 m
- True Width
- 1.528 m
- From
- 410.8 m
- To
- 412.71 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-412.71
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“17.12”
Context: 1.91
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 1.528
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · zincGrade: 38.2Grade Unit: %Intercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 38.2
- Grade Unit
- %
- Intercept
- 0.42 m
- True Width
- 0.336 m
- From
- 410.8 m
- To
- 411.22 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-411.22
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Exceptional high-grade zinc intercept in the hanging wall zone, representing a bonanza grade.
Positive factors
- Exceptional zinc grade for VMS deposit.
- Bonanza Intercept
Evidence · table
“38.20”
Context: 0.42
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.336
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · copperGrade: 0.14Grade Unit: %Intercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 0.42 m
- True Width
- 0.336 m
- From
- 410.8 m
- To
- 411.22 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-411.22
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade copper intercept in the hanging wall zone.
Evidence · table
“0.14”
Context: 0.42
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.336
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · goldGrade: 0.41Grade Unit: g/tIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 0.42 m
- True Width
- 0.336 m
- From
- 410.8 m
- To
- 411.22 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-411.22
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.41”
Context: 0.42
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.336
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · silverGrade: 88.1Grade Unit: g/tIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 88.1
- Grade Unit
- g/t
- Intercept
- 0.42 m
- True Width
- 0.336 m
- From
- 410.8 m
- To
- 411.22 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-411.22
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate silver intercept in the hanging wall zone.
Positive factors
- Moderate silver grade for VMS deposit.
Evidence · table
“88.10”
Context: 0.42
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.336
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · galliumGrade: 54.7Grade Unit: ppmIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 54.7
- Grade Unit
- ppm
- Intercept
- 0.42 m
- True Width
- 0.336 m
- From
- 410.8 m
- To
- 411.22 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-411.22
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“54.70”
Context: 0.42
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.336
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · indiumGrade: 8.58Grade Unit: ppmIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 8.58
- Grade Unit
- ppm
- Intercept
- 0.42 m
- True Width
- 0.336 m
- From
- 410.8 m
- To
- 411.22 m
- Hole Depth
- 456 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:410.8-411.22
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“8.58”
Context: 0.42
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.336
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · zincGrade: 1.13Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.13
- Grade Unit
- %
- Intercept
- 5 m
- True Width
- 4 m
- From
- 416 m
- To
- 421 m
- Hole Depth
- 456 m
- Intercept Depth
- 416 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:416-421
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade zinc intercept in the hanging wall zone.
Evidence · table
“1.13”
Context: 5.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · copperGrade: 0.05Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 5 m
- True Width
- 4 m
- From
- 416 m
- To
- 421 m
- Hole Depth
- 456 m
- Intercept Depth
- 416 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:416-421
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade copper intercept in the hanging wall zone.
Evidence · table
“0.05”
Context: 5.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · goldGrade: 0.08Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.08
- Grade Unit
- g/t
- Intercept
- 5 m
- True Width
- 4 m
- From
- 416 m
- To
- 421 m
- Hole Depth
- 456 m
- Intercept Depth
- 416 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:416-421
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.08”
Context: 5.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · silverGrade: 14.65Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 14.65
- Grade Unit
- g/t
- Intercept
- 5 m
- True Width
- 4 m
- From
- 416 m
- To
- 421 m
- Hole Depth
- 456 m
- Intercept Depth
- 416 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:416-421
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the hanging wall zone.
Evidence · table
“14.65”
Context: 5.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · galliumGrade: 39.13Grade Unit: ppmIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 39.13
- Grade Unit
- ppm
- Intercept
- 5 m
- True Width
- 4 m
- From
- 416 m
- To
- 421 m
- Hole Depth
- 456 m
- Intercept Depth
- 416 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:416-421
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“39.13”
Context: 5.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · indiumGrade: 1.42Grade Unit: ppmIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- indium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.42
- Grade Unit
- ppm
- Intercept
- 5 m
- True Width
- 4 m
- From
- 416 m
- To
- 421 m
- Hole Depth
- 456 m
- Intercept Depth
- 416 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:416-421
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated indium values, indicating potential for additional value.
Evidence · table
“1.42”
Context: 5.00
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 4
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · zincGrade: 1.38Grade Unit: %Intercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.38
- Grade Unit
- %
- Intercept
- 1.15 m
- True Width
- 0.92 m
- From
- 425.85 m
- To
- 427 m
- Hole Depth
- 456 m
- Intercept Depth
- 425.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:425.85-427
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade zinc intercept in the hanging wall zone.
Evidence · table
“1.38”
Context: 1.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · copperGrade: 0.54Grade Unit: %Intercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 1.15 m
- True Width
- 0.92 m
- From
- 425.85 m
- To
- 427 m
- Hole Depth
- 456 m
- Intercept Depth
- 425.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:425.85-427
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Moderate copper intercept in the hanging wall zone.
Positive factors
- Moderate copper grade for VMS deposit.
Evidence · table
“0.54”
Context: 1.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · goldGrade: 0.1Grade Unit: g/tIntercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 1.15 m
- True Width
- 0.92 m
- From
- 425.85 m
- To
- 427 m
- Hole Depth
- 456 m
- Intercept Depth
- 425.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:425.85-427
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade gold intercept in the hanging wall zone.
Evidence · table
“0.10”
Context: 1.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · silverGrade: 9.75Grade Unit: g/tIntercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 9.75
- Grade Unit
- g/t
- Intercept
- 1.15 m
- True Width
- 0.92 m
- From
- 425.85 m
- To
- 427 m
- Hole Depth
- 456 m
- Intercept Depth
- 425.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:425.85-427
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Low-grade silver intercept in the hanging wall zone.
Evidence · table
“9.75”
Context: 1.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
EL-26-006Electrolode Critical Metals · galliumGrade: 30.5Grade Unit: ppmIntercept: 1.15 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gallium
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 30.5
- Grade Unit
- ppm
- Intercept
- 1.15 m
- True Width
- 0.92 m
- From
- 425.85 m
- To
- 427 m
- Hole Depth
- 456 m
- Intercept Depth
- 425.85 m
Classification
- Deposit Type
- vms
- Program
- mixed
- Sample Type
- drill
- Group ID
- EL-26-006:425.85-427
- Mining Method
- unknown
Location
- Location
- HW
- Easting
- 512426
- Northing
- 5649233
- CRS
- NAD83 / Zone 15
- Elevation
- 401.8 m
- Azimuth
- 138 °
- Dip
- -65 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Deleterious
- Deleterious Flag
- No
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Elevated gallium values, indicating potential for additional value.
Evidence · table
“30.50”
Context: 1.15
Tags used in scoring
True Width Disclosedpositive
Actual thickness perpendicular to structure is stated, not just downhole length.
Why it applies: true_width_m is 0.92
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
IncludesElectrolode Critical Metals · zincGrade: 20.14Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 20.14
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 342.8 m
- To
- 344.5 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:342.8-344.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 20.14 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 34.2 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 20.14 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.14”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · copperGrade: 0.89Grade Unit: %Intercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.89
- Grade Unit
- %
- Intercept
- 1.7 m
- From
- 342.8 m
- To
- 344.5 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:342.8-344.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.89 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.5 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.89”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · goldGrade: 0.37Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 342.8 m
- To
- 344.5 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:342.8-344.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.6 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · silverGrade: 112.29Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 112.29
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 342.8 m
- To
- 344.5 m
- Intercept Depth
- 342.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:342.8-344.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 112.29 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 190.9 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“112.29”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · zincGrade: 20.44Grade Unit: %Intercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 20.44
- Grade Unit
- %
- Intercept
- 1.45 m
- From
- 380.1 m
- To
- 381.55 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:380.1-381.55
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 20.44 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 29.6 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 20.44 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.44”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · copperGrade: 0.98Grade Unit: %Intercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.98
- Grade Unit
- %
- Intercept
- 1.45 m
- From
- 380.1 m
- To
- 381.55 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:380.1-381.55
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.98 % copper is moderate against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.4 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.98”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · goldGrade: 0.21Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 1.45 m
- From
- 380.1 m
- To
- 381.55 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:380.1-381.55
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.21 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.21 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.21”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · silverGrade: 39.07Grade Unit: g/tIntercept: 1.45 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 39.07
- Grade Unit
- g/t
- Intercept
- 1.45 m
- From
- 380.1 m
- To
- 381.55 m
- Intercept Depth
- 380.1 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:380.1-381.55
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 39.07 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 56.7 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“39.07”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · zincGrade: 16.91Grade Unit: %Intercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 16.91
- Grade Unit
- %
- Intercept
- 1.91 m
- From
- 410.8 m
- To
- 412.71 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:410.8-412.71
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 16.91 % zinc is strong against the default band [18, 10, 5, 2] %. Grade×width 32.3 %·m is weak (grade alone is strong; the better of the two is used).
Positive factors
- 16.91 % zinc is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“16.91”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · copperGrade: 3.59Grade Unit: %Intercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 3.59
- Grade Unit
- %
- Intercept
- 1.91 m
- From
- 410.8 m
- To
- 412.71 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:410.8-412.71
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 3.59 % copper is exceptional against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 6.9 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 3.59 % copper is exceptional on the vms deposit band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.59”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · goldGrade: 1.33Grade Unit: g/tIntercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.33
- Grade Unit
- g/t
- Intercept
- 1.91 m
- From
- 410.8 m
- To
- 412.71 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:410.8-412.71
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.33 g/t gold is moderate against the default band [5, 2, 1, 0.3] g/t. Grade×width 2.5 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.33”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · silverGrade: 116.77Grade Unit: g/tIntercept: 1.91 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 116.77
- Grade Unit
- g/t
- Intercept
- 1.91 m
- From
- 410.8 m
- To
- 412.71 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:410.8-412.71
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 116.77 g/t silver is moderate against the default band [500, 200, 100, 30] g/t. Grade×width 223.0 g/t·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“116.77”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · zincGrade: 38.2Grade Unit: %Intercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 38.2
- Grade Unit
- %
- Intercept
- 0.42 m
- From
- 410.8 m
- To
- 411.22 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:410.8-411.22
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 38.2 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 16.0 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 38.2 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“38.20”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · copperGrade: 0.14Grade Unit: %Intercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 0.42 m
- From
- 410.8 m
- To
- 411.22 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:410.8-411.22
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.14 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · goldGrade: 0.41Grade Unit: g/tIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.41
- Grade Unit
- g/t
- Intercept
- 0.42 m
- From
- 410.8 m
- To
- 411.22 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:410.8-411.22
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.41 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.41”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · silverGrade: 88.1Grade Unit: g/tIntercept: 0.42 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 88.1
- Grade Unit
- g/t
- Intercept
- 0.42 m
- From
- 410.8 m
- To
- 411.22 m
- Intercept Depth
- 410.8 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:410.8-411.22
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 88.1 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 37.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“88.10”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-006Electrolode Critical Metals · zincGrade: 8.4Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 8.4
- Grade Unit
- %
- Intercept
- 4 m
- From
- 433 m
- To
- 437 m
- Intercept Depth
- 433 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-006:433-437
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 8.4 % zinc is moderate against the default band [18, 10, 5, 2] %. Grade×width 33.6 %·m is weak (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.40”
Context: EL-26-006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-006Electrolode Critical Metals · copperGrade: 0.4Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 4 m
- From
- 433 m
- To
- 437 m
- Intercept Depth
- 433 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-006:433-437
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.4 % copper is weak against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 1.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.40”
Context: EL-26-006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-006Electrolode Critical Metals · goldGrade: 0.35Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 433 m
- To
- 437 m
- Intercept Depth
- 433 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-006:433-437
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.35 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.35”
Context: EL-26-006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-006Electrolode Critical Metals · silverGrade: 21.88Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- EL-26-006
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 21.88
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 433 m
- To
- 437 m
- Intercept Depth
- 433 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-006:433-437
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 21.88 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 87.5 g/t·m is below.
Negative factors
- 21.88 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“21.88”
Context: EL-26-006
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · zincGrade: 20.05Grade Unit: %Intercept: 1.54 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 20.05
- Grade Unit
- %
- Intercept
- 1.54 m
- From
- 435 m
- To
- 436.54 m
- Intercept Depth
- 435 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:435-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 20.05 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 30.9 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 20.05 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“20.05”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · copperGrade: 0.23Grade Unit: %Intercept: 1.54 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.23
- Grade Unit
- %
- Intercept
- 1.54 m
- From
- 435 m
- To
- 436.54 m
- Intercept Depth
- 435 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:435-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.23 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.23 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.23”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · goldGrade: 0.33Grade Unit: g/tIntercept: 1.54 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.33
- Grade Unit
- g/t
- Intercept
- 1.54 m
- From
- 435 m
- To
- 436.54 m
- Intercept Depth
- 435 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:435-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.33 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.33”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
IncludesElectrolode Critical Metals · silverGrade: 27.54Grade Unit: g/tIntercept: 1.54 mView all detailsHide details
Identity
- Hole ID
- Includes
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 27.54
- Grade Unit
- g/t
- Intercept
- 1.54 m
- From
- 435 m
- To
- 436.54 m
- Intercept Depth
- 435 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Includes:435-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 27.54 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 42.4 g/t·m is below.
Negative factors
- 27.54 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27.54”
Context: Includes
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · zincGrade: 37.38Grade Unit: %Intercept: 0.73 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 37.38
- Grade Unit
- %
- Intercept
- 0.73 m
- From
- 435.81 m
- To
- 436.54 m
- Intercept Depth
- 435.81 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:435.81-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 37.38 % zinc is exceptional against the default band [18, 10, 5, 2] %. Grade×width 27.3 %·m is weak (grade alone is exceptional; the better of the two is used).
Positive factors
- 37.38 % zinc is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“37.38”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · copperGrade: 0.27Grade Unit: %Intercept: 0.73 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 0.73 m
- From
- 435.81 m
- To
- 436.54 m
- Intercept Depth
- 435.81 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:435.81-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.27 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.27 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.27”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · goldGrade: 0.45Grade Unit: g/tIntercept: 0.73 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 0.73 m
- From
- 435.81 m
- To
- 436.54 m
- Intercept Depth
- 435.81 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:435.81-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.45 g/t gold is weak against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.45”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Also Incl.Electrolode Critical Metals · silverGrade: 40.35Grade Unit: g/tIntercept: 0.73 mView all detailsHide details
Identity
- Hole ID
- Also Incl.
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 40.35
- Grade Unit
- g/t
- Intercept
- 0.73 m
- From
- 435.81 m
- To
- 436.54 m
- Intercept Depth
- 435.81 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- Also Incl.:435.81-436.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 40.35 g/t silver is weak against the default band [500, 200, 100, 30] g/t. Grade×width 29.5 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“40.35”
Context: Also Incl.
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-007Electrolode Critical Metals · zincGrade: 0.52Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- EL-26-007
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.52
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 100 m
- To
- 101.4 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-007:100-101.4
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.52 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.7 %·m is below.
Negative factors
- 0.52 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.52”
Context: EL-26-007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-007Electrolode Critical Metals · copperGrade: 0.05Grade Unit: %Intercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- EL-26-007
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 1.4 m
- From
- 100 m
- To
- 101.4 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-007:100-101.4
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.05 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: EL-26-007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-007Electrolode Critical Metals · goldGrade: 0.03Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- EL-26-007
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.03
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 100 m
- To
- 101.4 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-007:100-101.4
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.03 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: EL-26-007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-007Electrolode Critical Metals · silverGrade: 8.23Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- EL-26-007
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 8.23
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 100 m
- To
- 101.4 m
- Intercept Depth
- 100 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-007:100-101.4
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 8.23 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 11.5 g/t·m is below.
Negative factors
- 8.23 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“8.23”
Context: EL-26-007
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-008AElectrolode Critical Metals · zincGrade: 0.32Grade Unit: %Intercept: 1.04 mView all detailsHide details
Identity
- Hole ID
- EL-26-008A
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.32
- Grade Unit
- %
- Intercept
- 1.04 m
- From
- 120.5 m
- To
- 121.54 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-008A:120.5-121.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.32 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.3 %·m is below.
Negative factors
- 0.32 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.32”
Context: EL-26-008A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-008AElectrolode Critical Metals · copperGrade: 0.01Grade Unit: %Intercept: 1.04 mView all detailsHide details
Identity
- Hole ID
- EL-26-008A
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.04 m
- From
- 120.5 m
- To
- 121.54 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-008A:120.5-121.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: EL-26-008A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-008AElectrolode Critical Metals · goldGrade: 0.01Grade Unit: g/tIntercept: 1.04 mView all detailsHide details
Identity
- Hole ID
- EL-26-008A
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1.04 m
- From
- 120.5 m
- To
- 121.54 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-008A:120.5-121.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: EL-26-008A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-008AElectrolode Critical Metals · silverGrade: 0.66Grade Unit: g/tIntercept: 1.04 mView all detailsHide details
Identity
- Hole ID
- EL-26-008A
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 1.04 m
- From
- 120.5 m
- To
- 121.54 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-008A:120.5-121.54
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.66 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.66 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.66”
Context: EL-26-008A
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-009Electrolode Critical Metals · zincGrade: 0.1Grade Unit: %Intercept: 0.58 mView all detailsHide details
Identity
- Hole ID
- EL-26-009
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 0.58 m
- From
- 132.3 m
- To
- 132.88 m
- Intercept Depth
- 132.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-009:132.3-132.88
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.1 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 0.1 %·m is below.
Negative factors
- 0.1 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.10”
Context: EL-26-009
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-009Electrolode Critical Metals · copperGrade: 0.01Grade Unit: %Intercept: 0.58 mView all detailsHide details
Identity
- Hole ID
- EL-26-009
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 0.58 m
- From
- 132.3 m
- To
- 132.88 m
- Intercept Depth
- 132.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-009:132.3-132.88
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: EL-26-009
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-009Electrolode Critical Metals · goldGrade: 0.01Grade Unit: g/tIntercept: 0.58 mView all detailsHide details
Identity
- Hole ID
- EL-26-009
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 0.58 m
- From
- 132.3 m
- To
- 132.88 m
- Intercept Depth
- 132.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-009:132.3-132.88
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: EL-26-009
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-009Electrolode Critical Metals · silverGrade: 2.15Grade Unit: g/tIntercept: 0.58 mView all detailsHide details
Identity
- Hole ID
- EL-26-009
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 2.15
- Grade Unit
- g/t
- Intercept
- 0.58 m
- From
- 132.3 m
- To
- 132.88 m
- Intercept Depth
- 132.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-009:132.3-132.88
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 2.15 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 1.2 g/t·m is below.
Negative factors
- 2.15 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.15”
Context: EL-26-009
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-010Electrolode Critical Metals · zincGrade: 0.28Grade Unit: %Intercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- EL-26-010
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 6.8 m
- From
- 87 m
- To
- 93.8 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-010:87-93.8
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.28 % zinc is below against the default band [18, 10, 5, 2] %. Grade×width 1.9 %·m is below.
Negative factors
- 0.28 % zinc is below the weak threshold (2 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.28”
Context: EL-26-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-010Electrolode Critical Metals · copperGrade: 0.03Grade Unit: %Intercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- EL-26-010
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 6.8 m
- From
- 87 m
- To
- 93.8 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-010:87-93.8
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.03 % copper is below against the vms deposit band [2.5, 1.5, 0.8, 0.4] %. Grade×width 0.2 %·m is below.
Negative factors
- 0.03 % copper is below the weak threshold (0.4 %) on the vms deposit band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.03”
Context: EL-26-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-010Electrolode Critical Metals · goldGrade: 0.01Grade Unit: g/tIntercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- EL-26-010
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 6.8 m
- From
- 87 m
- To
- 93.8 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-010:87-93.8
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 g/t gold is below against the default band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.01 g/t gold is below the weak threshold (0.3 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: EL-26-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-010Electrolode Critical Metals · silverGrade: 1.92Grade Unit: g/tIntercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- EL-26-010
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1.92
- Grade Unit
- g/t
- Intercept
- 6.8 m
- From
- 87 m
- To
- 93.8 m
- Intercept Depth
- 87 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-010:87-93.8
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table. 1.92 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 13.1 g/t·m is below.
Negative factors
- 1.92 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.92”
Context: EL-26-010
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · zincGrade: 38Grade Unit: ppmIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 38
- Grade Unit
- ppm
- Intercept
- 1.2 m
- From
- 339.3 m
- To
- 340.5 m
- Intercept Depth
- 339.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:339.3-340.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 38 ppm zinc, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the zinc rubric unit %; not scored.
Evidence · table
“38”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · copperGrade: 3270Grade Unit: ppmIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 3270
- Grade Unit
- ppm
- Intercept
- 1.2 m
- From
- 339.3 m
- To
- 340.5 m
- Intercept Depth
- 339.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:339.3-340.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 3270 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“3270”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · goldGrade: 0.68Grade Unit: ppmIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.68
- Grade Unit
- ppm
- Intercept
- 1.2 m
- From
- 339.3 m
- To
- 340.5 m
- Intercept Depth
- 339.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:339.3-340.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.68 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“0.68”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · silverGrade: 5.35Grade Unit: ppmIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 5.35
- Grade Unit
- ppm
- Intercept
- 1.2 m
- From
- 339.3 m
- To
- 340.5 m
- Intercept Depth
- 339.3 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:339.3-340.5
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 5.35 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“5.35”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · zincGrade: 1530Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- zinc
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 1530
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 486 m
- To
- 489 m
- Intercept Depth
- 486 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:486-489
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 1530 ppm zinc, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the zinc rubric unit %; not scored.
Evidence · table
“1530”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · copperGrade: 59Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- copper
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 59
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 486 m
- To
- 489 m
- Intercept Depth
- 486 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:486-489
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 59 ppm copper, reported in a unit the rubric does not cover (%).
Negative factors
- Grade unit ppm does not match the copper rubric unit %; not scored.
Evidence · table
“59”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · goldGrade: 0Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- gold
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 486 m
- To
- 489 m
- Intercept Depth
- 486 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:486-489
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0 ppm gold, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the gold rubric unit g/t; not scored.
Evidence · table
“0.00”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
EL-26-001Electrolode Critical Metals · silverGrade: 0.21Grade Unit: ppmIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- EL-26-001
- Project
- Electrolode Critical Metals
- Commodity
- silver
- Region
- canada_on
- Reported Region
- canada_on
- Ticker
- TT
Geometry
- Grade
- 0.21
- Grade Unit
- ppm
- Intercept
- 3 m
- From
- 486 m
- To
- 489 m
- Intercept Depth
- 486 m
Classification
- Deposit Type
- vms
- Sample Type
- drill
- Group ID
- EL-26-001:486-489
- Mining Method
- unknown
Location
- CRS
- NAD83 / Zone 15
QA/QC
- Laboratory
- AGAT Laboratories Ltd.
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-06-22T00:00:00.000Z
Reasoning: Expanded from assay table: 0.21 ppm silver, reported in a unit the rubric does not cover (g/t).
Negative factors
- Grade unit ppm does not match the silver rubric unit g/t; not scored.
Evidence · table
“0.21”
Context: EL-26-001
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.