Trident Intersects 5.73 g/t Au over 15.0m including 9.35 g/t Au over 7.0m and 15.05 g/t Au over 2.0m Below Historical Mining Infrastructure at the Contact Lake Gold Project in Northern Saskatchewan
Original announcement by tmx on
- Company
- Trident Resources Corp.
- Ticker
- ROCK
- Exchange
- TSX
- Region
- Northern Saskatchewan
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-18 19:02:41 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Trident Resources Corp. announced significant gold drill results from its Contact Lake Gold Project in Northern Saskatchewan, including 5.73 g/t Au over 15.0m, with higher-grade sub-intervals. These results from the final six holes of the 2025 program successfully extended gold mineralization at depth below historical mining infrastructure, validating the project's potential as a robust orogenic gold system. A fully-funded 10,000m winter 2026 drill program is already underway to follow up on these promising findings.
Reasoning: Trident Resources announced strong gold drill results from its Contact Lake Project, successfully extending high-grade mineralization at depth below historical workings. The headline intercept of 5.73 g/t Au over 15.0m, including bonanza grades, is highly material and novel, confirming the project's potential. The company has a follow-up program underway, and QA/QC is disclosed, contributing to high confidence.
Positive factors
- High-grade gold intercepts, including bonanza grades, were reported.
- Drilling successfully extended gold mineralization at depth below historical mining infrastructure.
- The results validate the potential for a large, robust orogenic gold system.
- A fully-funded follow-up drill program is already underway, indicating strong company confidence.
- QA/QC procedures are disclosed, and a Qualified Person has approved the technical information.
Negative factors
- True widths of the intercepts have not been determined, which may overstate actual thickness.
Facts used in scoring: 54
Extracted facts
Stored fact records: 54. Some facts used in scoring do not have a stored record.
Drill Results (54)
CL25001Contact Lake · goldGrade: 0.56Grade Unit: g/tIntercept: 29.5 mView all detailsHide details
Identity
- Hole ID
- CL25001
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 29.5 m
- From
- 41.5 m
- To
- 71 m
- Hole Depth
- 198 m
- Intercept Depth
- 41.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25001:41.5-71
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507933
- Northing
- 6141324
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 402 m
- Azimuth
- 336 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows gold mineralization but at a grade below typical economic thresholds for orogenic gold, making it less material. However, it contributes to the overall understanding of the deposit's extent.
Positive factors
- Intercept confirms gold mineralization in the area.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- Grade is below typical economic thresholds for orogenic gold deposits.
- True width not determined, potentially overstating length.
Evidence · table
“0.56”
Context: 29.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25002Contact Lake · goldGrade: 2.49Grade Unit: g/tIntercept: 29.61 mView all detailsHide details
Identity
- Hole ID
- CL25002
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 2.49
- Grade Unit
- g/t
- Intercept
- 29.61 m
- From
- 39.26 m
- To
- 68.87 m
- Hole Depth
- 311 m
- Intercept Depth
- 39.26 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25002:39.26-68.87
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507933
- Northing
- 6141324
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 402 m
- Azimuth
- 339 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a good grade over a significant width, indicating strong mineralization. The presence of a high-grade sub-interval further enhances its materiality.
Positive factors
- Good grade over a significant width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“2.49”
Context: 29.61
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25002Contact Lake · goldGrade: 27.09Grade Unit: g/tIntercept: 2.21 mView all detailsHide details
Identity
- Hole ID
- CL25002
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 27.09
- Grade Unit
- g/t
- Intercept
- 2.21 m
- From
- 39.26 m
- To
- 41.47 m
- Hole Depth
- 311 m
- Intercept Depth
- 39.26 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25002:39.26-41.47
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507933
- Northing
- 6141324
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 402 m
- Azimuth
- 339 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, significantly above the exceptional threshold for orogenic gold, indicating very high-grade mineralization within the broader interval.
Positive factors
- Exceptional bonanza grade over a narrow interval.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“27.09”
Context: 2.21
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone (27.09 g/t Au) well above the deposit-type norm for orogenic gold.
Evidence · table
“27.09”
Context: 2.21
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25002Contact Lake · goldGrade: 0.42Grade Unit: g/tIntercept: 16 mView all detailsHide details
Identity
- Hole ID
- CL25002
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 0.42
- Grade Unit
- g/t
- Intercept
- 16 m
- From
- 94 m
- To
- 110 m
- Hole Depth
- 311 m
- Intercept Depth
- 94 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25002:94-110
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507933
- Northing
- 6141324
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 402 m
- Azimuth
- 339 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows gold mineralization but at a grade below typical economic thresholds for orogenic gold, making it less material. However, it contributes to the overall understanding of the deposit's extent.
Positive factors
- Intercept confirms gold mineralization in the area.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- Grade is below typical economic thresholds for orogenic gold deposits.
- True width not determined, potentially overstating length.
Evidence · table
“0.42”
Context: 16.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25002Contact Lake · goldGrade: 0.47Grade Unit: g/tIntercept: 10.61 mView all detailsHide details
Identity
- Hole ID
- CL25002
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 10.61 m
- From
- 241 m
- To
- 251.61 m
- Hole Depth
- 311 m
- Intercept Depth
- 241 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25002:241-251.61
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507933
- Northing
- 6141324
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 402 m
- Azimuth
- 339 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows gold mineralization but at a grade below typical economic thresholds for orogenic gold, making it less material. However, it contributes to the overall understanding of the deposit's extent.
Positive factors
- Intercept confirms gold mineralization in the area.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- Grade is below typical economic thresholds for orogenic gold deposits.
- True width not determined, potentially overstating length.
Evidence · table
“0.47”
Context: 10.61
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25003Contact Lake · goldGrade: 0.66Grade Unit: g/tIntercept: 7.01 mView all detailsHide details
Identity
- Hole ID
- CL25003
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 0.66
- Grade Unit
- g/t
- Intercept
- 7.01 m
- From
- 46.88 m
- To
- 53.89 m
- Hole Depth
- 236 m
- Intercept Depth
- 46.88 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25003:46.88-53.89
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507941
- Northing
- 6141303
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 360 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows gold mineralization but at a grade below typical economic thresholds for orogenic gold, making it less material. However, it contributes to the overall understanding of the deposit's extent.
Positive factors
- Intercept confirms gold mineralization in the area.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- Grade is below typical economic thresholds for orogenic gold deposits.
- True width not determined, potentially overstating length.
Evidence · table
“0.66”
Context: 7.01
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25003Contact Lake · goldGrade: 7.89Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- CL25003
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 7.89
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 69 m
- To
- 92 m
- Hole Depth
- 236 m
- Intercept Depth
- 69 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25003:69-92
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507941
- Northing
- 6141303
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 360 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a significant width, indicating robust mineralization. The presence of a high-grade sub-interval further enhances its materiality.
Positive factors
- Strong grade over a significant width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“7.89”
Context: 23.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25003Contact Lake · goldGrade: 23.86Grade Unit: g/tIntercept: 6.89 mView all detailsHide details
Identity
- Hole ID
- CL25003
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 23.86
- Grade Unit
- g/t
- Intercept
- 6.89 m
- From
- 75 m
- To
- 81.89 m
- Hole Depth
- 236 m
- Intercept Depth
- 75 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25003:75-81.89
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507941
- Northing
- 6141303
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 360 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, significantly above the exceptional threshold for orogenic gold, indicating very high-grade mineralization within the broader interval.
Positive factors
- Exceptional bonanza grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“23.86”
Context: 6.89
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone (23.86 g/t Au) well above the deposit-type norm for orogenic gold.
Evidence · table
“23.86”
Context: 6.89
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25003Contact Lake · goldGrade: 7.03Grade Unit: g/tIntercept: 43.25 mView all detailsHide details
Identity
- Hole ID
- CL25003
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 7.03
- Grade Unit
- g/t
- Intercept
- 43.25 m
- From
- 121 m
- To
- 164.25 m
- Hole Depth
- 236 m
- Intercept Depth
- 121 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25003:121-164.25
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507941
- Northing
- 6141303
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 360 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept represents a very strong result with a high grade over an exceptional width, indicating a substantial zone of gold mineralization. The high-grade sub-interval further boosts its significance.
Positive factors
- Strong grade over an exceptional width for orogenic gold, indicating significant mineralization.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“7.03”
Context: 43.25
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25003Contact Lake · goldGrade: 30.06Grade Unit: g/tIntercept: 9.25 mView all detailsHide details
Identity
- Hole ID
- CL25003
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 30.06
- Grade Unit
- g/t
- Intercept
- 9.25 m
- From
- 155 m
- To
- 164.25 m
- Hole Depth
- 236 m
- Intercept Depth
- 155 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25003:155-164.25
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507941
- Northing
- 6141303
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 360 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, significantly above the exceptional threshold for orogenic gold, indicating very high-grade mineralization within the broader interval.
Positive factors
- Exceptional bonanza grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“30.06”
Context: 9.25
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone (30.06 g/t Au) well above the deposit-type norm for orogenic gold.
Evidence · table
“30.06”
Context: 9.25
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25004Contact Lake · goldGrade: 8.37Grade Unit: g/tIntercept: 2.06 mView all detailsHide details
Identity
- Hole ID
- CL25004
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 8.37
- Grade Unit
- g/t
- Intercept
- 2.06 m
- From
- 157.45 m
- To
- 159.51 m
- Hole Depth
- 182 m
- Intercept Depth
- 157.45 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25004:157.45-159.51
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507940
- Northing
- 6141302
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 0 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“8.37”
Context: 2.06
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25005Contact Lake · goldGrade: 5.66Grade Unit: g/tIntercept: 5.94 mView all detailsHide details
Identity
- Hole ID
- CL25005
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 5.66
- Grade Unit
- g/t
- Intercept
- 5.94 m
- From
- 100.06 m
- To
- 106 m
- Hole Depth
- 194 m
- Intercept Depth
- 100.06 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25005:100.06-106
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507943
- Northing
- 6141302
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 339 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a moderate width, indicating good mineralization. The presence of a high-grade sub-interval further enhances its materiality.
Positive factors
- Strong grade over a moderate width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“5.66”
Context: 5.94
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25005Contact Lake · goldGrade: 11.83Grade Unit: g/tIntercept: 2.44 mView all detailsHide details
Identity
- Hole ID
- CL25005
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 11.83
- Grade Unit
- g/t
- Intercept
- 2.44 m
- From
- 100.06 m
- To
- 102.5 m
- Hole Depth
- 194 m
- Intercept Depth
- 100.06 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25005:100.06-102.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507943
- Northing
- 6141302
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 339 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization within the broader interval, though the limited width reduces its overall impact.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“11.83”
Context: 2.44
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25005Contact Lake · goldGrade: 42.95Grade Unit: g/tIntercept: 2.55 mView all detailsHide details
Identity
- Hole ID
- CL25005
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 42.95
- Grade Unit
- g/t
- Intercept
- 2.55 m
- From
- 142 m
- To
- 144.55 m
- Hole Depth
- 194 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25005:142-144.55
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507943
- Northing
- 6141302
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 401 m
- Azimuth
- 339 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, significantly above the exceptional threshold for orogenic gold, indicating very high-grade mineralization.
Positive factors
- Exceptional bonanza grade over a narrow interval.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“42.95”
Context: 2.55
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone (42.95 g/t Au) well above the deposit-type norm for orogenic gold.
Evidence · table
“42.95”
Context: 2.55
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25006Contact Lake · goldGrade: 7.28Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- CL25006
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 7.28
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 272 m
- To
- 287 m
- Hole Depth
- 362 m
- Intercept Depth
- 272 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25006:272-287
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 508006
- Northing
- 6141099
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 403 m
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a significant width, indicating robust mineralization. The presence of high-grade sub-intervals further enhances its materiality.
Positive factors
- Strong grade over a significant width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“7.28”
Context: 15.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25006Contact Lake · goldGrade: 16.69Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- CL25006
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 16.69
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 272 m
- To
- 278 m
- Hole Depth
- 362 m
- Intercept Depth
- 272 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25006:272-278
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 508006
- Northing
- 6141099
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 403 m
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, significantly above the exceptional threshold for orogenic gold, indicating very high-grade mineralization within the broader interval.
Positive factors
- Exceptional bonanza grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“16.69”
Context: 6.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone (16.69 g/t Au) well above the deposit-type norm for orogenic gold.
Evidence · table
“16.69”
Context: 6.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25006Contact Lake · goldGrade: 30.41Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CL25006
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 30.41
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 272 m
- To
- 275 m
- Hole Depth
- 362 m
- Intercept Depth
- 272 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25006:272-275
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 508006
- Northing
- 6141099
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 403 m
- Azimuth
- 350 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, significantly above the exceptional threshold for orogenic gold, indicating very high-grade mineralization within the broader interval.
Positive factors
- Exceptional bonanza grade over a narrow interval.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“30.41”
Context: 3.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone (30.41 g/t Au) well above the deposit-type norm for orogenic gold.
Evidence · table
“30.41”
Context: 3.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25007Contact Lake · goldGrade: 4.43Grade Unit: g/tIntercept: 39.5 mView all detailsHide details
Identity
- Hole ID
- CL25007
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 4.43
- Grade Unit
- g/t
- Intercept
- 39.5 m
- From
- 329.5 m
- To
- 369 m
- Hole Depth
- 419 m
- Intercept Depth
- 329.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25007:329.5-369
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 508005
- Northing
- 6141099
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 403 m
- Azimuth
- 349 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over an exceptional width, indicating robust mineralization. The presence of high-grade sub-intervals further enhances its materiality.
Positive factors
- Strong grade over an exceptional width for orogenic gold, indicating significant mineralization.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“4.43”
Context: 39.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25007Contact Lake · goldGrade: 5.76Grade Unit: g/tIntercept: 15.5 mView all detailsHide details
Identity
- Hole ID
- CL25007
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 5.76
- Grade Unit
- g/t
- Intercept
- 15.5 m
- From
- 329.5 m
- To
- 345 m
- Hole Depth
- 419 m
- Intercept Depth
- 329.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25007:329.5-345
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 508005
- Northing
- 6141099
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 403 m
- Azimuth
- 349 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a significant width, indicating robust mineralization within the broader interval. The presence of a high-grade sub-interval further enhances its materiality.
Positive factors
- Strong grade over a significant width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“5.76”
Context: 15.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has. been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25007Contact Lake · goldGrade: 9.43Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- CL25007
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 9.43
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 329.5 m
- To
- 335.5 m
- Hole Depth
- 419 m
- Intercept Depth
- 329.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25007:329.5-335.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 508005
- Northing
- 6141099
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 403 m
- Azimuth
- 349 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization within the broader interval.
Positive factors
- Very strong grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“9.43”
Context: 6.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25007Contact Lake · goldGrade: 37.31Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- CL25007
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 37.31
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 367 m
- To
- 369 m
- Hole Depth
- 419 m
- Intercept Depth
- 367 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25007:367-369
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 508005
- Northing
- 6141099
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 403 m
- Azimuth
- 349 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a bonanza-grade intercept, significantly above the exceptional threshold for orogenic gold, indicating very high-grade mineralization.
Positive factors
- Exceptional bonanza grade over a narrow interval.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“37.31”
Context: 2.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone (37.31 g/t Au) well above the deposit-type norm for orogenic gold.
Evidence · table
“37.31”
Context: 2.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25008Contact Lake · goldGrade: 7.41Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- CL25008
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 7.41
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 139 m
- To
- 145 m
- Hole Depth
- 344 m
- Intercept Depth
- 139 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25008:139-145
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507985
- Northing
- 6141205
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 400 m
- Azimuth
- 339 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a good width, indicating robust mineralization.
Positive factors
- Strong grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“7.41”
Context: 6.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25008Contact Lake · goldGrade: 6.27Grade Unit: g/tIntercept: 1.35 mView all detailsHide details
Identity
- Hole ID
- CL25008
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 6.27
- Grade Unit
- g/t
- Intercept
- 1.35 m
- From
- 155 m
- To
- 156.35 m
- Hole Depth
- 344 m
- Intercept Depth
- 155 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25008:155-156.35
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507985
- Northing
- 6141205
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 400 m
- Azimuth
- 339 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“6.27”
Context: 1.35
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25008Contact Lake · goldGrade: 7.74Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- CL25008
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 7.74
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 268 m
- To
- 273 m
- Hole Depth
- 344 m
- Intercept Depth
- 268 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25008:268-273
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507985
- Northing
- 6141205
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 400 m
- Azimuth
- 339 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a good width, indicating robust mineralization.
Positive factors
- Strong grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“7.74”
Context: 5.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25008Contact Lake · goldGrade: 6.07Grade Unit: g/tIntercept: 2.92 mView all detailsHide details
Identity
- Hole ID
- CL25008
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 6.07
- Grade Unit
- g/t
- Intercept
- 2.92 m
- From
- 313.58 m
- To
- 316.5 m
- Hole Depth
- 344 m
- Intercept Depth
- 313.58 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25008:313.58-316.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507985
- Northing
- 6141205
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 400 m
- Azimuth
- 339 °
- Dip
- -60 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“6.07”
Context: 2.92
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25009Contact Lake · goldGrade: 9.23Grade Unit: g/tIntercept: 2.83 mView all detailsHide details
Identity
- Hole ID
- CL25009
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 9.23
- Grade Unit
- g/t
- Intercept
- 2.83 m
- From
- 85.5 m
- To
- 88.33 m
- Hole Depth
- 296 m
- Intercept Depth
- 85.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25009:85.5-88.33
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507961
- Northing
- 6141252
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 399 m
- Azimuth
- 339 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“9.23”
Context: 2.83
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25009Contact Lake · goldGrade: 8.49Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- CL25009
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 8.49
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 199 m
- To
- 202 m
- Hole Depth
- 296 m
- Intercept Depth
- 199 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25009:199-202
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507961
- Northing
- 6141252
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 399 m
- Azimuth
- 339 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“8.49”
Context: 3.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25009Contact Lake · goldGrade: 6.19Grade Unit: g/tIntercept: 2.11 mView all detailsHide details
Identity
- Hole ID
- CL25009
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 6.19
- Grade Unit
- g/t
- Intercept
- 2.11 m
- From
- 242.89 m
- To
- 245 m
- Hole Depth
- 296 m
- Intercept Depth
- 242.89 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25009:242.89-245
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507961
- Northing
- 6141252
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 399 m
- Azimuth
- 339 °
- Dip
- -58 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“6.19”
Context: 2.11
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25010Contact Lake · goldGrade: 4.23Grade Unit: g/tIntercept: 6.78 mView all detailsHide details
Identity
- Hole ID
- CL25010
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 4.23
- Grade Unit
- g/t
- Intercept
- 6.78 m
- From
- 188.5 m
- To
- 195.28 m
- Hole Depth
- 230 m
- Intercept Depth
- 188.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25010:188.5-195.28
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507940
- Northing
- 6141245
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 405 m
- Azimuth
- 339 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a good grade over a good width, indicating solid mineralization. The presence of a higher-grade sub-interval further enhances its materiality.
Positive factors
- Good grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“4.23”
Context: 6.78
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25010Contact Lake · goldGrade: 6.72Grade Unit: g/tIntercept: 3.28 mView all detailsHide details
Identity
- Hole ID
- CL25010
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 6.72
- Grade Unit
- g/t
- Intercept
- 3.28 m
- From
- 192 m
- To
- 195.28 m
- Hole Depth
- 230 m
- Intercept Depth
- 192 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25010:192-195.28
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507940
- Northing
- 6141245
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 405 m
- Azimuth
- 339 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization within the broader interval.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“6.72”
Context: 3.28
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25011Contact Lake · goldGrade: 5.86Grade Unit: g/tIntercept: 1.1 mView all detailsHide details
Identity
- Hole ID
- CL25011
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 5.86
- Grade Unit
- g/t
- Intercept
- 1.1 m
- From
- 217.15 m
- To
- 218.25 m
- Hole Depth
- 245 m
- Intercept Depth
- 217.15 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25011:217.15-218.25
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507941
- Northing
- 6141245
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 405 m
- Azimuth
- 339 °
- Dip
- -56 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“5.86”
Context: 1.10
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25012Contact Lake · goldGrade: 2.97Grade Unit: g/tIntercept: 3.37 mView all detailsHide details
Identity
- Hole ID
- CL25012
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 2.97
- Grade Unit
- g/t
- Intercept
- 3.37 m
- From
- 133 m
- To
- 136.37 m
- Hole Depth
- 209 m
- Intercept Depth
- 133 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25012:133-136.37
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507891
- Northing
- 6141254
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 413 m
- Azimuth
- 341 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a narrow width, indicating some mineralization.
Positive factors
- Moderate grade over a narrow width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“2.97”
Context: 3.37
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25012Contact Lake · goldGrade: 1.76Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- CL25012
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 1.76
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 194 m
- To
- 199.5 m
- Hole Depth
- 209 m
- Intercept Depth
- 194 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25012:194-199.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507891
- Northing
- 6141254
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 413 m
- Azimuth
- 341 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a good width, indicating some mineralization. The presence of a higher-grade sub-interval adds some materiality.
Positive factors
- Moderate grade over a good width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“1.76”
Context: 5.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25012Contact Lake · goldGrade: 5.56Grade Unit: g/tIntercept: 1.4 mView all detailsHide details
Identity
- Hole ID
- CL25012
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 5.56
- Grade Unit
- g/t
- Intercept
- 1.4 m
- From
- 194 m
- To
- 195.4 m
- Hole Depth
- 209 m
- Intercept Depth
- 194 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25012:194-195.4
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507891
- Northing
- 6141254
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 413 m
- Azimuth
- 341 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization within the broader interval.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“5.56”
Context: 1.40
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25013Contact Lake · goldGrade: 4.13Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- CL25013
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 4.13
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 77.4 m
- To
- 79 m
- Hole Depth
- 215 m
- Intercept Depth
- 77.4 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25013:77.4-79
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507891
- Northing
- 6141254
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 413 m
- Azimuth
- 341 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a good grade over a narrow width, indicating some mineralization.
Positive factors
- Good grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“4.13”
Context: 1.60
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25013Contact Lake · goldGrade: 13.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CL25013
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 13.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 135 m
- To
- 136 m
- Hole Depth
- 215 m
- Intercept Depth
- 135 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25013:135-136
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507891
- Northing
- 6141254
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 413 m
- Azimuth
- 341 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization, though the limited width reduces its overall impact.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“13.20”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25013Contact Lake · goldGrade: 2Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CL25013
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 190 m
- To
- 194 m
- Hole Depth
- 215 m
- Intercept Depth
- 190 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25013:190-194
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507891
- Northing
- 6141254
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 413 m
- Azimuth
- 341 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a narrow width, indicating some mineralization. The presence of a higher-grade sub-interval adds some materiality.
Positive factors
- Moderate grade over a narrow width for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“2.00”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25013Contact Lake · goldGrade: 5.42Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- CL25013
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 5.42
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 193 m
- To
- 194 m
- Hole Depth
- 215 m
- Intercept Depth
- 193 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25013:193-194
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507891
- Northing
- 6141254
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 413 m
- Azimuth
- 341 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization within the broader interval.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“5.42”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25014Contact Lake · goldGrade: 5.03Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- CL25014
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 5.03
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 484 m
- To
- 489 m
- Hole Depth
- 548 m
- Intercept Depth
- 484 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25014:484-489
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507851
- Northing
- 6140948
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 419 m
- Azimuth
- 338 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a good width, indicating robust mineralization at depth below historical workings, which is a positive for project extension.
Positive factors
- Strong grade over a good width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“5.03”
Context: 5.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25014 ... to target the potential down-dip and lateral extension of gold mineralization in the Main Zone at a vertical depth of 330m, near the lower limits of the mine infrastructure in that area.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25014Contact Lake · goldGrade: 10.68Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- CL25014
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 10.68
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 484 m
- To
- 486 m
- Hole Depth
- 548 m
- Intercept Depth
- 484 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25014:484-486
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507851
- Northing
- 6140948
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 419 m
- Azimuth
- 338 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization within the broader interval at depth below historical workings.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“10.68”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25014 ... to target the potential down-dip and lateral extension of gold mineralization in the Main Zone at a vertical depth of 330m, near the lower limits of the mine infrastructure in that area.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25014Contact Lake · goldGrade: 1.24Grade Unit: g/tIntercept: 23 mView all detailsHide details
Identity
- Hole ID
- CL25014
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 1.24
- Grade Unit
- g/t
- Intercept
- 23 m
- From
- 507 m
- To
- 530 m
- Hole Depth
- 548 m
- Intercept Depth
- 507 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25014:507-530
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507851
- Northing
- 6140948
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 419 m
- Azimuth
- 338 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a significant width, indicating mineralization at depth below historical workings. The presence of higher-grade sub-intervals adds some materiality.
Positive factors
- Moderate grade over a significant width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“1.24”
Context: 23.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25014 ... to target the potential down-dip and lateral extension of gold mineralization in the Main Zone at a vertical depth of 330m, near the lower limits of the mine infrastructure in that area.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25014Contact Lake · goldGrade: 2.15Grade Unit: g/tIntercept: 10.5 mView all detailsHide details
Identity
- Hole ID
- CL25014
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 2.15
- Grade Unit
- g/t
- Intercept
- 10.5 m
- From
- 512.5 m
- To
- 523 m
- Hole Depth
- 548 m
- Intercept Depth
- 512.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25014:512.5-523
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507851
- Northing
- 6140948
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 419 m
- Azimuth
- 338 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a good width, indicating mineralization within the broader interval at depth below historical workings.
Positive factors
- Moderate grade over a good width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“2.15”
Context: 10.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25014 ... to target the potential down-dip and lateral extension of gold mineralization in the Main Zone at a vertical depth of 330m, near the lower limits of the mine infrastructure in that area.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25014Contact Lake · goldGrade: 7.9Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- CL25014
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 7.9
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 521 m
- To
- 523 m
- Hole Depth
- 548 m
- Intercept Depth
- 521 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25014:521-523
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507851
- Northing
- 6140948
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 419 m
- Azimuth
- 338 °
- Dip
- -62 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating high-grade mineralization within the broader interval at depth below historical workings.
Positive factors
- Strong grade over a narrow interval for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“7.90”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25014 ... to target the potential down-dip and lateral extension of gold mineralization in the Main Zone at a vertical depth of 330m, near the lower limits of the mine infrastructure in that area.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25015Contact Lake · goldGrade: 1.9Grade Unit: g/tIntercept: 13.85 mView all detailsHide details
Identity
- Hole ID
- CL25015
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 13.85 m
- From
- 512.15 m
- To
- 526 m
- Hole Depth
- 659 m
- Intercept Depth
- 512.15 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25015:512.15-526
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507679
- Northing
- 6140715
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 427 m
- Azimuth
- 335 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a good width, indicating mineralization at depth below historical workings. The presence of higher-grade sub-intervals adds some materiality.
Positive factors
- Moderate grade over a good width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“1.90”
Context: 13.85
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25015 ... was designed to test for the down-dip extension of the southwest Main Zone gold mineralization at a vertical depth of >350m, below the lowermost mine infrastructure.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25015Contact Lake · goldGrade: 14.95Grade Unit: g/tIntercept: 1.06 mView all detailsHide details
Identity
- Hole ID
- CL25015
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 14.95
- Grade Unit
- g/t
- Intercept
- 1.06 m
- From
- 512.15 m
- To
- 513.21 m
- Hole Depth
- 659 m
- Intercept Depth
- 512.15 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25015:512.15-513.21
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507679
- Northing
- 6140715
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 427 m
- Azimuth
- 335 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization within the broader interval at depth below historical workings.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“14.95”
Context: 1.06
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25015 ... was designed to test for the down-dip extension of the southwest Main Zone gold mineralization at a vertical depth of >350m, below the lowermost mine infrastructure.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25015Contact Lake · goldGrade: 3.46Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- CL25015
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 3.46
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 523.5 m
- To
- 526 m
- Hole Depth
- 659 m
- Intercept Depth
- 523.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25015:523.5-526
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507679
- Northing
- 6140715
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 427 m
- Azimuth
- 335 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a moderate grade over a narrow width, indicating some mineralization within the broader interval at depth below historical workings.
Positive factors
- Moderate grade over a narrow width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“3.46”
Context: 2.50
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25015 ... was designed to test for the down-dip extension of the southwest Main Zone gold mineralization at a vertical depth of >350m, below the lowermost mine infrastructure.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25015Contact Lake · goldGrade: 12.06Grade Unit: g/tIntercept: 1.85 mView all detailsHide details
Identity
- Hole ID
- CL25015
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 12.06
- Grade Unit
- g/t
- Intercept
- 1.85 m
- From
- 536.75 m
- To
- 538.6 m
- Hole Depth
- 659 m
- Intercept Depth
- 536.75 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25015:536.75-538.6
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507679
- Northing
- 6140715
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 427 m
- Azimuth
- 335 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization at depth below historical workings.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“12.06”
Context: 1.85
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25015 ... was designed to test for the down-dip extension of the southwest Main Zone gold mineralization at a vertical depth of >350m, below the lowermost mine infrastructure.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25015Contact Lake · goldGrade: 4.91Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- CL25015
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 4.91
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 575 m
- To
- 579 m
- Hole Depth
- 659 m
- Intercept Depth
- 575 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25015:575-579
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507679
- Northing
- 6140715
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 427 m
- Azimuth
- 335 °
- Dip
- -67 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a narrow width, indicating robust mineralization at depth below historical workings.
Positive factors
- Strong grade over a narrow width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“4.91”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension below historical mining infrastructure.
Evidence · text
“Hole CL25015 ... was designed to test for the down-dip extension of the southwest Main Zone gold mineralization at a vertical depth of >350m, below the lowermost mine infrastructure.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25016Contact Lake · goldGrade: 2.62Grade Unit: g/tIntercept: 37.44 mView all detailsHide details
Identity
- Hole ID
- CL25016
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 2.62
- Grade Unit
- g/t
- Intercept
- 37.44 m
- From
- 465.56 m
- To
- 503 m
- Hole Depth
- 560 m
- Intercept Depth
- 465.56 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25016:465.56-503
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507570
- Northing
- 6140743
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 441 m
- Azimuth
- 338 °
- Dip
- -63 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over an exceptional width, indicating robust mineralization at depth below historical workings, which is a significant positive for project extension. The high-grade sub-intervals further enhance its materiality.
Positive factors
- Strong grade over an exceptional width for orogenic gold, indicating significant mineralization.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“2.62”
Context: 37.44
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension of high-grade gold mineralization.
Evidence · text
“Hole CL25016 ... to target the southwest, down-dip extension of high-grade gold mineralization in the PO Zone”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25016Contact Lake · goldGrade: 5.7Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- CL25016
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 5.7
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 469.8 m
- To
- 478.8 m
- Hole Depth
- 560 m
- Intercept Depth
- 469.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25016:469.8-478.8
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507570
- Northing
- 6140743
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 441 m
- Azimuth
- 338 °
- Dip
- -63 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a good width, indicating robust mineralization within the broader interval at depth below historical workings. The high-grade sub-intervals further enhance its materiality.
Positive factors
- Strong grade over a good width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“5.70”
Context: 9.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension of high-grade gold mineralization.
Evidence · text
“Hole CL25016 ... to target the southwest, down-dip extension of high-grade gold mineralization in the PO Zone”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25016Contact Lake · goldGrade: 10.09Grade Unit: g/tIntercept: 1.7 mView all detailsHide details
Identity
- Hole ID
- CL25016
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 10.09
- Grade Unit
- g/t
- Intercept
- 1.7 m
- From
- 469.8 m
- To
- 471.5 m
- Hole Depth
- 560 m
- Intercept Depth
- 469.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25016:469.8-471.5
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507570
- Northing
- 6140743
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 441 m
- Azimuth
- 338 °
- Dip
- -63 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization within the broader interval at depth below historical workings.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“10.09”
Context: 1.70
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension of high-grade gold mineralization.
Evidence · text
“Hole CL25016 ... to target the southwest, down-dip extension of high-grade gold mineralization in the PO Zone”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25016Contact Lake · goldGrade: 4.09Grade Unit: g/tIntercept: 18.2 mView all detailsHide details
Identity
- Hole ID
- CL25016
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 4.09
- Grade Unit
- g/t
- Intercept
- 18.2 m
- From
- 469.8 m
- To
- 488 m
- Hole Depth
- 560 m
- Intercept Depth
- 469.8 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25016:469.8-488
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507570
- Northing
- 6140743
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 441 m
- Azimuth
- 338 °
- Dip
- -63 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over a significant width, indicating robust mineralization within the broader interval at depth below historical workings. The high-grade sub-interval further enhances its materiality.
Positive factors
- Strong grade over a significant width for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“4.09”
Context: 18.20
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension of high-grade gold mineralization.
Evidence · text
“Hole CL25016 ... to target the southwest, down-dip extension of high-grade gold mineralization in the PO Zone”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25016Contact Lake · goldGrade: 11.53Grade Unit: g/tIntercept: 2.3 mView all detailsHide details
Identity
- Hole ID
- CL25016
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 11.53
- Grade Unit
- g/t
- Intercept
- 2.3 m
- From
- 476.5 m
- To
- 478.8 m
- Hole Depth
- 560 m
- Intercept Depth
- 476.5 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25016:476.5-478.8
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507570
- Northing
- 6140743
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 441 m
- Azimuth
- 338 °
- Dip
- -63 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This is a very strong grade intercept, indicating high-grade mineralization within the broader interval at depth below historical workings.
Positive factors
- Very strong grade over a narrow interval for orogenic gold.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“11.53”
Context: 2.30
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension of high-grade gold mineralization.
Evidence · text
“Hole CL25016 ... to target the southwest, down-dip extension of high-grade gold mineralization in the PO Zone”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
CL25017Contact Lake · goldGrade: 2.61Grade Unit: g/tIntercept: 48.95 mView all detailsHide details
Identity
- Hole ID
- CL25017
- Project
- Contact Lake
- Commodity
- gold
- Region
- canada_sk
- Reported Region
- canada_sk
- Ticker
- ROCK
Geometry
- Grade
- 2.61
- Grade Unit
- g/t
- Intercept
- 48.95 m
- From
- 467 m
- To
- 515.95 m
- Hole Depth
- 665 m
- Intercept Depth
- 467 m
Classification
- Deposit Type
- orogenic
- Program
- exploration
- Sample Type
- drill
- Group ID
- CL25017:467-515.95
- Mining Method
- underground
Location
- Location
- Main Zone
- Easting
- 507546
- Northing
- 6140709
- CRS
- UTM Zone 13 NAD 83
- Elevation
- 441 m
- Azimuth
- 338 °
- Dip
- -63 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Global
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-01-20T00:00:00.000Z
Reasoning: This intercept shows a strong grade over an exceptional width, indicating robust mineralization at depth below historical workings, which is a significant positive for project extension. The high-grade sub-intervals further enhance its materiality.
Positive factors
- Strong grade over an exceptional width for orogenic gold, indicating significant mineralization.
- Intercepts mineralization at depth below historical workings, indicating potential extension.
- QA/QC procedures are disclosed, enhancing data reliability.
Negative factors
- True width not determined, potentially overstating length.
Evidence · table
“2.61”
Context: 48.95
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation.
Evidence · text
“Widths are drilled intercepts, true widths have not been determined.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, and stated methods (blanks, standards, duplicates).
Evidence · text
“Quality Control: All drill core is logged, photographed and cut in half with a diamond saw. Half of the core is placed in sealed poly bags with unique identification numbers and transported to ALS Global in Saskatoon, Saskatchewan for analysis, while the other half is archived and stored on site for verification and reference purposes. At the lab, samples are received and digitally recorded then dried and pulverized into a fine powder. Gold is assayed using a 30g fire assay method and 49 additional elements are analyzed by Inductively Coupled Plasma (ICP) utilizing a 4-acid digestion. Quality Assurance and Quality Control (QAQC) samples including field blanks, duplicates and lab-certified standards are inserted in the sample stream at a rate of greater than 10% of all samples submitted to the lab. ALS Global also conducts their own internal QAQC protocol.”
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Step-Out ExtensionRejected · positive
Mineralization extended beyond the previously known limit.
Reason: Mineralization extended beyond the previously known limit, targeting down-dip extension of historically defined gold mineralization.
Evidence · text
“Hole CL25017 ... to further test for the down-dip extension of historically defined gold mineralization reported in the PO Zone.”
QP/CP SignedRejected · positive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Reason: Qualified Person (QP) or Competent Person (CP) named and signed off.
Evidence · text
“The technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed and approved by Cornell McDowell, P.Geo., VP Exploration for Trident Resources and the Qualified Person for Trident as defined by NI 43-101.”
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.