Troilus Drills 3.38 g/t AuEq Over 22 m Within 129.05 m at 0.95 g/t AuEq from Inferred Target in the Z87 Reserve Pit
Original announcement by orestocks on
- Company
- Troilus Mining Corp.
- Ticker
- TLG.TO
- Exchange
- Unavailable
- Region
- Quebec, Canada
- Primary commodity
- Gold
- Secondary commodities
- Copper, Silver
- Document categories
- Drill results
- Extracted
- 2026-09-17 11:22:37 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Troilus Mining Corp. announced strong drill results from its Z87 optimization program at the Troilus Gold-Copper Project in Quebec, Canada. The program, targeting inferred material and historically unsampled intervals within and around the Z87 Reserve pit, returned high-grade intercepts such as 3.38 g/t AuEq over 22 m within a broader 129.05 m at 0.95 g/t AuEq. These new results, which are not yet included in the current resource and reserve estimates, demonstrate potential for resource conversion, mine plan optimization, and improved strip ratios.
Reasoning: The drill results from the Z87 optimization program demonstrate significant high-grade and broad gold-copper-silver mineralization within and around the existing reserve pit, including bonanza-grade intercepts. The program successfully targeted inferred material and historically unsampled zones, indicating strong potential for resource conversion, mine plan optimization, and improved early-year mill feed. The detailed metal equivalent assumptions and comprehensive QA/QC procedures support the credibility of the results, despite the QP being an employee and the general nature of true width disclosure.
Positive factors
- High-grade and broad intercepts, including several bonanza-grade sections.
- Successful targeting of inferred material for resource conversion.
- Extension of mineralization into historically unsampled areas and zones previously modeled as waste.
- Potential for mine plan optimization, strip ratio improvement, and enhanced early-year mill feed.
- Detailed disclosure of metal equivalent assumptions.
- Comprehensive QA/QC procedures disclosed, and QP sign-off.
- Project located in a tier-one mining jurisdiction (Quebec, Canada).
Negative factors
- True width is estimated as a range (75-90%) rather than precisely stated for each intercept.
- Cut-off grade for compositing is not explicitly disclosed.
- Qualified Person is an employee of the company, not independent.
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 95
Extracted facts
Stored fact records: 95. Some facts used in scoring do not have a stored record.
Drill Results (95)
87-26-485Troilus · goldGrade: 0.4Grade Unit: g/tIntercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 63 m
- To
- 81 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:63-81
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.42
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows weak gold grade over a moderate width, contributing to the overall mineralization but not a highlight.
Evidence · table
“0.40”
Context: 18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.01Grade Unit: %Intercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 18 m
- From
- 63 m
- To
- 81 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:63-81
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.42
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade, contributing marginally to the overall mineralization.
Evidence · table
“0.01”
Context: 18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 0.7Grade Unit: g/tIntercept: 18 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.7
- Grade Unit
- g/t
- Intercept
- 18 m
- From
- 63 m
- To
- 81 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:63-81
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.42
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade, contributing marginally to the overall mineralization.
Evidence · table
“0.70”
Context: 18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 2.95Grade Unit: g/tIntercept: 1.38 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 2.95
- Grade Unit
- g/t
- Intercept
- 1.38 m
- From
- 68 m
- To
- 69.38 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:68-69.38
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.07
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a strong gold grade, indicating a higher-grade zone within the broader mineralization.
Evidence · table
“2.95”
Context: 1.38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.04Grade Unit: %Intercept: 1.38 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 1.38 m
- From
- 68 m
- To
- 69.38 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:68-69.38
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.07
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low copper grade.
Evidence · table
“0.04”
Context: 1.38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 5Grade Unit: g/tIntercept: 1.38 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 5
- Grade Unit
- g/t
- Intercept
- 1.38 m
- From
- 68 m
- To
- 69.38 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:68-69.38
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.07
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low silver grade.
Evidence · table
“5.00”
Context: 1.38
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.75Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.75
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 173.5 m
- To
- 175 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:173.5-175
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade.
Evidence · table
“0.75”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.01Grade Unit: %Intercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 1.5 m
- From
- 173.5 m
- To
- 175 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:173.5-175
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low copper grade.
Evidence · table
“0.01”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 0.5Grade Unit: g/tIntercept: 1.5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 1.5 m
- From
- 173.5 m
- To
- 175 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:173.5-175
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.77
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low silver grade.
Evidence · table
“0.50”
Context: 1.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.2Grade Unit: g/tIntercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 214 m
- To
- 221 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:214-221
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very weak gold grade over a moderate width.
Evidence · table
“0.20”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.02Grade Unit: %Intercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 7 m
- From
- 214 m
- To
- 221 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:214-221
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.02”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 0.38Grade Unit: g/tIntercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 214 m
- To
- 221 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:214-221
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.23
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.38”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.39Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 233 m
- To
- 237 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:233-237
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width.
Evidence · table
“0.39”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.03Grade Unit: %Intercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 4 m
- From
- 233 m
- To
- 237 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:233-237
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.03”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 0.31Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 233 m
- To
- 237 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:233-237
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.44
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.31”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.22Grade Unit: g/tIntercept: 15.23 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 15.23 m
- From
- 257.77 m
- To
- 273 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:257.77-273
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very weak gold grade over a moderate width.
Evidence · table
“0.22”
Context: 15.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.03Grade Unit: %Intercept: 15.23 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 15.23 m
- From
- 257.77 m
- To
- 273 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:257.77-273
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.03”
Context: 15.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 0.47Grade Unit: g/tIntercept: 15.23 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 15.23 m
- From
- 257.77 m
- To
- 273 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:257.77-273
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.27
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.47”
Context: 15.23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.31Grade Unit: g/tIntercept: 42 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 42 m
- From
- 348 m
- To
- 390 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:348-390
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a strong width, contributing to the overall mineralization.
Evidence · table
“0.31”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.02Grade Unit: %Intercept: 42 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 42 m
- From
- 348 m
- To
- 390 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:348-390
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.02”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 0.32Grade Unit: g/tIntercept: 42 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.32
- Grade Unit
- g/t
- Intercept
- 42 m
- From
- 348 m
- To
- 390 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:348-390
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.33
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.32”
Context: 42
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.8Grade Unit: g/tIntercept: 129.05 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 129.05 m
- From
- 398 m
- To
- 527.05 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:398-527.05
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.95
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This broad intercept shows a moderate gold grade, contributing significantly to the overall mineralization and resource potential.
Positive factors
- Broad intercept (129.05m) with moderate gold grade, indicating significant mineralization.
Evidence · table
“0.80”
Context: 129.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.1Grade Unit: %Intercept: 129.05 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.1
- Grade Unit
- %
- Intercept
- 129.05 m
- From
- 398 m
- To
- 527.05 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:398-527.05
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.95
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This broad intercept shows a weak copper grade, contributing to the overall mineralization.
Evidence · table
“0.10”
Context: 129.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 1.11Grade Unit: g/tIntercept: 129.05 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.11
- Grade Unit
- g/t
- Intercept
- 129.05 m
- From
- 398 m
- To
- 527.05 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:398-527.05
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.95
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This broad intercept shows a weak silver grade, contributing to the overall mineralization.
Evidence · table
“1.11”
Context: 129.05
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 2.97Grade Unit: g/tIntercept: 22 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 2.97
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 449 m
- To
- 471 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:449-471
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.38
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, highlighting a high-grade zone within the broader mineralization.
Positive factors
- Strong gold grade (2.97 g/t) over a significant width (22m), indicating a high-grade zone.
Evidence · table
“2.97”
Context: 22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.29Grade Unit: %Intercept: 22 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.29
- Grade Unit
- %
- Intercept
- 22 m
- From
- 449 m
- To
- 471 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:449-471
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.38
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak copper grade over a significant width.
Evidence · table
“0.29”
Context: 22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 1.8Grade Unit: g/tIntercept: 22 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.8
- Grade Unit
- g/t
- Intercept
- 22 m
- From
- 449 m
- To
- 471 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:449-471
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.38
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a significant width.
Evidence · table
“1.80”
Context: 22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 3.91Grade Unit: g/tIntercept: 12.47 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 3.91
- Grade Unit
- g/t
- Intercept
- 12.47 m
- From
- 456.18 m
- To
- 468.65 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:456.18-468.65
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade over a significant width, highlighting a high-grade zone within the broader mineralization.
Positive factors
- Strong gold grade (3.91 g/t) over a significant width (12.47m), indicating a high-grade zone.
Evidence · table
“3.91”
Context: 12.47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.3Grade Unit: %Intercept: 12.47 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.3
- Grade Unit
- %
- Intercept
- 12.47 m
- From
- 456.18 m
- To
- 468.65 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:456.18-468.65
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak copper grade over a significant width.
Evidence · table
“0.30”
Context: 12.47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 1.82Grade Unit: g/tIntercept: 12.47 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.82
- Grade Unit
- g/t
- Intercept
- 12.47 m
- From
- 456.18 m
- To
- 468.65 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:456.18-468.65
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 4.34
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade over a significant width.
Evidence · table
“1.82”
Context: 12.47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 2.7Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 500 m
- To
- 501 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:500-501
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.26
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a strong gold grade, indicating a high-grade zone.
Positive factors
- Strong gold grade (2.70 g/t) over a narrow width.
Evidence · table
“2.70”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.37Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 1 m
- From
- 500 m
- To
- 501 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:500-501
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.26
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a weak copper grade.
Evidence · table
“0.37”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 4.4Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 4.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 500 m
- To
- 501 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:500-501
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.26
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a very low silver grade.
Evidence · table
“4.40”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.61Grade Unit: g/tIntercept: 30 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.61
- Grade Unit
- g/t
- Intercept
- 30 m
- From
- 533 m
- To
- 563 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:533-563
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.69
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a strong width, contributing to the overall mineralization.
Evidence · table
“0.61”
Context: 30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.05Grade Unit: %Intercept: 30 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 30 m
- From
- 533 m
- To
- 563 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:533-563
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.69
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.05”
Context: 30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 1.15Grade Unit: g/tIntercept: 30 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 30 m
- From
- 533 m
- To
- 563 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:533-563
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.69
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“1.15”
Context: 30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 1.48Grade Unit: g/tIntercept: 5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 540 m
- To
- 545 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:540-545
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating a higher-grade zone.
Evidence · table
“1.48”
Context: 5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.13Grade Unit: %Intercept: 5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.13
- Grade Unit
- %
- Intercept
- 5 m
- From
- 540 m
- To
- 545 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:540-545
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.13”
Context: 5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 4.08Grade Unit: g/tIntercept: 5 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 4.08
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 540 m
- To
- 545 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:540-545
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.72
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“4.08”
Context: 5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 2.99Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 2.99
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 543 m
- To
- 544 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:543-544
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.38
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a strong gold grade, indicating a high-grade zone.
Positive factors
- Strong gold grade (2.99 g/t) over a narrow width.
Evidence · table
“2.99”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.21Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 1 m
- From
- 543 m
- To
- 544 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:543-544
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.38
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a very weak copper grade.
Evidence · table
“0.21”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 8.1Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 8.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 543 m
- To
- 544 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:543-544
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.38
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a very low silver grade.
Evidence · table
“8.10”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · goldGrade: 0.21Grade Unit: g/tIntercept: 29 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 569 m
- To
- 598 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:569-598
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very weak gold grade over a strong width.
Evidence · table
“0.21”
Context: 29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · copperGrade: 0.03Grade Unit: %Intercept: 29 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 29 m
- From
- 569 m
- To
- 598 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:569-598
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.03”
Context: 29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-485Troilus · silverGrade: 0.53Grade Unit: g/tIntercept: 29 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-485
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.53
- Grade Unit
- g/t
- Intercept
- 29 m
- From
- 569 m
- To
- 598 m
- Intercept Depth
- 63 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-485:569-598
- Mining Method
- open_pit
Location
- Location
- Z87 reserve pit
- Dip
- -47 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.53”
Context: 29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 0.69Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.69
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 24 m
- To
- 26 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:24-26
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.71
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade.
Evidence · table
“0.69”
Context: 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0.01Grade Unit: %Intercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 2 m
- From
- 24 m
- To
- 26 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:24-26
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.71
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low copper grade.
Evidence · table
“0.01”
Context: 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.25Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 24 m
- To
- 26 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:24-26
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.71
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low silver grade.
Evidence · table
“0.25”
Context: 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 0.43Grade Unit: g/tIntercept: 17 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.43
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 34 m
- To
- 51 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:34-51
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a moderate width.
Evidence · table
“0.43”
Context: 17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0.01Grade Unit: %Intercept: 17 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 17 m
- From
- 34 m
- To
- 51 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:34-51
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.01”
Context: 17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.34Grade Unit: g/tIntercept: 17 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 34 m
- To
- 51 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:34-51
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.45
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.34”
Context: 17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 2.02Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 2.02
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 46 m
- To
- 47 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:46-47
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.03
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a strong gold grade, indicating a high-grade zone.
Positive factors
- Strong gold grade (2.02 g/t) over a narrow width.
Evidence · table
“2.02”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 1 m
- From
- 46 m
- To
- 47 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:46-47
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.03
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows no copper grade.
Evidence · table
“0.00”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.25Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 46 m
- To
- 47 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:46-47
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 2.03
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low silver grade.
Evidence · table
“0.25”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 0.17Grade Unit: g/tIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 58 m
- To
- 67 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:58-67
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very weak gold grade over a moderate width.
Evidence · table
“0.17”
Context: 9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0.02Grade Unit: %Intercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 9 m
- From
- 58 m
- To
- 67 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:58-67
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.02”
Context: 9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.35Grade Unit: g/tIntercept: 9 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.35
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 58 m
- To
- 67 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:58-67
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.21
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.35”
Context: 9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 0.22Grade Unit: g/tIntercept: 14 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 80 m
- To
- 94 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:80-94
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very weak gold grade over a moderate width.
Evidence · table
“0.22”
Context: 14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0Grade Unit: %Intercept: 14 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 14 m
- From
- 80 m
- To
- 94 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:80-94
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no copper grade.
Evidence · table
“0.00”
Context: 14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.25Grade Unit: g/tIntercept: 14 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 80 m
- To
- 94 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:80-94
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.22
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.25”
Context: 14
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 0.65Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.65
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 115.5 m
- To
- 117.5 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:115.5-117.5
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows a weak gold grade.
Evidence · table
“0.65”
Context: 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0Grade Unit: %Intercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 2 m
- From
- 115.5 m
- To
- 117.5 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:115.5-117.5
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows no copper grade.
Evidence · table
“0.00”
Context: 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.25Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 115.5 m
- To
- 117.5 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:115.5-117.5
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.66
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low silver grade.
Evidence · table
“0.25”
Context: 2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 0.34Grade Unit: g/tIntercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.34
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 180 m
- To
- 188 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:180-188
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a moderate width.
Evidence · table
“0.34”
Context: 8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0.03Grade Unit: %Intercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 8 m
- From
- 180 m
- To
- 188 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:180-188
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.03”
Context: 8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.47Grade Unit: g/tIntercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.47
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 180 m
- To
- 188 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:180-188
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.39
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.47”
Context: 8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · goldGrade: 0.52Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.52
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 236 m
- To
- 240 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:236-240
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width.
Evidence · table
“0.52”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · copperGrade: 0Grade Unit: %Intercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 4 m
- From
- 236 m
- To
- 240 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:236-240
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no copper grade.
Evidence · table
“0.00”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-511Troilus · silverGrade: 0.25Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-511
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 236 m
- To
- 240 m
- Intercept Depth
- 24 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-511:236-240
- Mining Method
- open_pit
Location
- Location
- Z87
- Dip
- -51 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.53
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.25”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 0.28Grade Unit: g/tIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 32 m
- To
- 38 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:32-38
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very weak gold grade over a moderate width.
Evidence · table
“0.28”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.01Grade Unit: %Intercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6 m
- From
- 32 m
- To
- 38 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:32-38
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.01”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 0.25Grade Unit: g/tIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 32 m
- To
- 38 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:32-38
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.3
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.25”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 0.8Grade Unit: g/tIntercept: 5.55 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.8
- Grade Unit
- g/t
- Intercept
- 5.55 m
- From
- 50.45 m
- To
- 56 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:50.45-56
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width.
Evidence · table
“0.80”
Context: 5.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.03Grade Unit: %Intercept: 5.55 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 5.55 m
- From
- 50.45 m
- To
- 56 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:50.45-56
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.03”
Context: 5.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 1.38Grade Unit: g/tIntercept: 5.55 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
- Intercept
- 5.55 m
- From
- 50.45 m
- To
- 56 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:50.45-56
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.86
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“1.38”
Context: 5.55
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 3.75Grade Unit: g/tIntercept: 0.91 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 3.75
- Grade Unit
- g/t
- Intercept
- 0.91 m
- From
- 50.45 m
- To
- 51.36 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:50.45-51.36
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.87
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very narrow intercept shows a strong gold grade, indicating a high-grade zone.
Positive factors
- Strong gold grade (3.75 g/t) over a very narrow width.
Evidence · table
“3.75”
Context: 0.91
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.06Grade Unit: %Intercept: 0.91 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.06
- Grade Unit
- %
- Intercept
- 0.91 m
- From
- 50.45 m
- To
- 51.36 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:50.45-51.36
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.87
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very narrow intercept shows very low copper grade.
Evidence · table
“0.06”
Context: 0.91
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 3Grade Unit: g/tIntercept: 0.91 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 0.91 m
- From
- 50.45 m
- To
- 51.36 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:50.45-51.36
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 3.87
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This very narrow intercept shows very low silver grade.
Evidence · table
“3.00”
Context: 0.91
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 0.24Grade Unit: g/tIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.24
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 67 m
- To
- 73 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:67-73
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a very weak gold grade over a moderate width.
Evidence · table
“0.24”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.01Grade Unit: %Intercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 6 m
- From
- 67 m
- To
- 73 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:67-73
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.01”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 0.25Grade Unit: g/tIntercept: 6 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 67 m
- To
- 73 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:67-73
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.25
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.25”
Context: 6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 1.52Grade Unit: g/tIntercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.52
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 98 m
- To
- 105 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:98-105
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a moderate width, indicating a higher-grade zone.
Positive factors
- Moderate gold grade (1.52 g/t) over a moderate width.
Evidence · table
“1.52”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.01Grade Unit: %Intercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 7 m
- From
- 98 m
- To
- 105 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:98-105
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.01”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 0.71Grade Unit: g/tIntercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.71
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 98 m
- To
- 105 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:98-105
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.71”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 9.57Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 9.57
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 104 m
- To
- 105 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:104-105
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 9.73
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows an exceptional gold grade, indicating a bonanza intercept.
Positive factors
- Exceptional gold grade (9.57 g/t) over a narrow width, indicating a bonanza intercept.
Evidence · table
“9.57”
Context: 1
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: This intercept of 9.57 g/t Au over 1m exceeds the exceptional gold grade threshold for open pit mining.
Evidence · table
“9.57”
Context: 1
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.08Grade Unit: %Intercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.08
- Grade Unit
- %
- Intercept
- 1 m
- From
- 104 m
- To
- 105 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:104-105
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 9.73
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low copper grade.
Evidence · table
“0.08”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 3.5Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 104 m
- To
- 105 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:104-105
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 9.73
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low silver grade.
Evidence · table
“3.50”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 0.77Grade Unit: g/tIntercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.77
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 141 m
- To
- 149 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:141-149
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.8
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a moderate width.
Evidence · table
“0.77”
Context: 8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.02Grade Unit: %Intercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 8 m
- From
- 141 m
- To
- 149 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:141-149
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.8
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low copper grade.
Evidence · table
“0.02”
Context: 8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 0.51Grade Unit: g/tIntercept: 8 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.51
- Grade Unit
- g/t
- Intercept
- 8 m
- From
- 141 m
- To
- 149 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:141-149
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 0.8
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows very low silver grade.
Evidence · table
“0.51”
Context: 8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 1.48Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 1.48
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 143 m
- To
- 146 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:143-146
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a moderate gold grade over a narrow width, indicating a higher-grade zone.
Evidence · table
“1.48”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0.05Grade Unit: %Intercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 3 m
- From
- 143 m
- To
- 146 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:143-146
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low copper grade.
Evidence · table
“0.05”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · silverGrade: 0.95Grade Unit: g/tIntercept: 3 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.95
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 143 m
- To
- 146 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:143-146
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Metal Eq. Grade
- 1.55
- Metal Eq. Unit
- g/t AuEq
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This narrow intercept shows very low silver grade.
Evidence · table
“0.95”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · goldGrade: 0.5Grade Unit: g/tIntercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0.5
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 190 m
- To
- 194 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:190-194
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows a weak gold grade over a narrow width.
Evidence · table
“0.50”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
87-26-515Troilus · copperGrade: 0Grade Unit: %Intercept: 4 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- 87-26-515
- Project
- Troilus
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- TLG.TO
Geometry
- Grade
- 0
- Grade Unit
- %
- Intercept
- 4 m
- From
- 190 m
- To
- 194 m
- Intercept Depth
- 32 m
Classification
- Program
- resource
- Sample Type
- drill
- Group ID
- 87-26-515:190-194
- Mining Method
- open_pit
Location
- Location
- Z87 hangingwall
- Dip
- -62 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Metal Equivalent
- Assumptions Disclosed
- Yes
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 1987-01-01T00:00:00.000Z
Dates
- Event date
- 2026-09-17T00:00:00.000Z
Reasoning: This intercept shows no copper grade.
Evidence · table
“0.00”
Context: 4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "resource"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.