Vault Strategic Reports Widespread Anomalous Tungsten Values Up To 1,100 PPM And Manganese Values Up To 4,430 PPM At War Bond, Nevada
Original announcement by tmx on
- Company
- Vault Strategic Mining Corp.
- Ticker
- KNOX
- Exchange
- TSX
- Region
- Nevada
- Primary commodity
- Tungsten
- Secondary commodities
- Manganese, Molybdenum, Bismuth, Copper, Iron ore
- Document categories
- Drill results
- Extracted
- 2026-09-16 06:33:41 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Vault Strategic Mining Corp. announced widespread anomalous tungsten and manganese values from its Phase 1 rock and soil sampling program at the War Bond Tungsten Project in Nevada. The program returned tungsten values up to 1,100 ppm and manganese values up to 4,430 ppm, supporting an emerging tungsten-skarn model. These early-stage results will be integrated with other data to refine drill targets and support a maiden NI 43-101 technical report.
Reasoning: The Phase 1 rock and soil sampling program returned widespread anomalous tungsten and manganese values, supporting a structurally controlled tungsten-skarn model and providing clear targets for future drilling.
Positive factors
- Widespread anomalous tungsten and manganese values
- Results support an emerging tungsten-skarn model
- Correlation with pathfinder elements (Mo, Bi, Cu, Mn, Fe)
- Project located in a top mining jurisdiction (Nevada)
- Maiden NI 43-101 technical report in preparation
- QP reviewed technical disclosure
Negative factors
- Results from surface rock and soil samples only, not drill intercepts
- No true width confirmed for estimated exposed mineralization
- Historical data not independently verified under NI 43-101 standards
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 58
Classification and evidence
Widespread Anomalous Valuespositive · Story-specific tag
No canonical definition is currently available.
Why it applies: The release reports 'widespread anomalous tungsten values across the War Bond Tungsten Project' and 'manganese values up to 4,430 ppm'.
Evidence · text
“widespread anomalous tungsten values across the War Bond Tungsten Project ( "War Bond" or the "Project" ), including rock results of up to 1,100 parts per million tungsten ( "ppm W" ) and manganese values of up to 4,430 parts per million ( "ppm Mn" ).”
Skarn Model Supportedpositive · Story-specific tag
No canonical definition is currently available.
Why it applies: The results 'support an emerging, structurally controlled tungsten-skarn model across the Project'.
Evidence · text
“The results support an emerging, structurally controlled tungsten-skarn model across the Project”
Early Stage Explorationneutral · Story-specific tag
No canonical definition is currently available.
Why it applies: The results are from the 'Phase 1 exploration program' consisting of rock and soil samples.
Evidence · text
“assay results from 42 rock and soil samples collected during the Company’s Phase 1 exploration program”
QP/CP Signedpositive · Story-specific tag
Qualified Person (QP) or Competent Person (CP) named and signed off — a member of a recognized professional association (e.g., AusIMM, SME, AIG, P.Geo) with relevant experience.
Why it applies: Mr. William Feyerabend, CPG, a Qualified Person as defined under NI 43-101, has reviewed and approved the scientific and technical disclosure.
Evidence · text
“Mr. William Feyerabend, CPG, an independent consulting geologist and a Qualified Person as defined under National Instrument 43-101, has reviewed and approved the scientific and technical disclosure contained in this news release.”
Surface Samples Onlynegative · Story-specific tag
No canonical definition is currently available.
Why it applies: The reported results are from 'rock and soil samples' and not from drilling.
Evidence · text
“assay results from 42 rock and soil samples collected during the Company’s Phase 1 exploration program”
No True Width Confirmednegative · Story-specific tag
No canonical definition is currently available.
Why it applies: The document states that 'field estimates and do not represent confirmed true widths or continuity' for exposed surface widths.
Evidence · text
“these are field estimates and do not represent confirmed true widths or continuity.”
Historical Data Not Verifiednegative · Story-specific tag
No canonical definition is currently available.
Why it applies: The release explicitly states that 'historical exploration results...predate National Instrument 43-101...and do not comply with current NI 43-101 requirements' and 'has not been independently verified under current NI 43-101 standards'.
Evidence · text
“The historical exploration results, sampling, drilling and other technical information referenced in this release predate National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") and do not comply with current NI 43-101 requirements.”
Extracted facts
Stored fact records: 58. Some facts used in scoring do not have a stored record.
Drill Results (58)
TT-2War Bond Tungsten Project · tungstenGrade: 580Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-2
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 580
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“580”
Context: TT-2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-2War Bond Tungsten Project · manganeseGrade: 3480Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-2
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3480
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3480”
Context: TT-2
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-3War Bond Tungsten Project · tungstenGrade: 13.4Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-3
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 13.4
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“13.4”
Context: TT-3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-3War Bond Tungsten Project · manganeseGrade: 3730Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-3
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3730
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3730”
Context: TT-3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-4War Bond Tungsten Project · tungstenGrade: 17.9Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-4
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 17.9
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“17.9”
Context: TT-4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-4War Bond Tungsten Project · manganeseGrade: 3140Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-4
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3140
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3140”
Context: TT-4
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-5War Bond Tungsten Project · tungstenGrade: 420Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-5
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 420
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“420”
Context: TT-5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-5War Bond Tungsten Project · manganeseGrade: 2030Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-5
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 2030
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“2030”
Context: TT-5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-6War Bond Tungsten Project · tungstenGrade: 270Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-6
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 270
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“270”
Context: TT-6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-6War Bond Tungsten Project · manganeseGrade: 1660Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-6
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 1660
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“1660”
Context: TT-6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-7War Bond Tungsten Project · tungstenGrade: 109Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-7
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 109
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“109”
Context: TT-7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-7War Bond Tungsten Project · manganeseGrade: 2110Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-7
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 2110
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only, not drill intercepts
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“2110”
Context: TT-7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-8War Bond Tungsten Project · tungstenGrade: 650Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-8
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 650
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“650”
Context: TT-8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-8War Bond Tungsten Project · manganeseGrade: 227Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-8
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 227
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“227”
Context: TT-8
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-9War Bond Tungsten Project · tungstenGrade: 400Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-9
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 400
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“400”
Context: TT-9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-9War Bond Tungsten Project · manganeseGrade: 136Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-9
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 136
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“136”
Context: TT-9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-10War Bond Tungsten Project · tungstenGrade: 440Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-10
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 440
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“440”
Context: TT-10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-10War Bond Tungsten Project · manganeseGrade: 288Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-10
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 288
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“288”
Context: TT-10
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-11War Bond Tungsten Project · tungstenGrade: 320Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-11
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 320
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“320”
Context: TT-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-11War Bond Tungsten Project · manganeseGrade: 214Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-11
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 214
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“214”
Context: TT-11
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-12War Bond Tungsten Project · tungstenGrade: 350Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-12
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 350
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“350”
Context: TT-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-12War Bond Tungsten Project · manganeseGrade: 186Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-12
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 186
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“186”
Context: TT-12
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-16War Bond Tungsten Project · tungstenGrade: 460Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-16
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 460
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“460”
Context: TT-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-16War Bond Tungsten Project · manganeseGrade: 2990Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-16
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 2990
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“2990”
Context: TT-16
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-17War Bond Tungsten Project · tungstenGrade: 155Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-17
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 155
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“155”
Context: TT-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-17War Bond Tungsten Project · manganeseGrade: 3310Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-17
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3310
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3310”
Context: TT-17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-18War Bond Tungsten Project · tungstenGrade: 1100Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-18
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 1100
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: This rock sample returned the highest tungsten value, strongly supporting the exploration model.
Positive factors
- High grade for surface sample
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“1100”
Context: TT-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-18War Bond Tungsten Project · manganeseGrade: 4040Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-18
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 4040
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“4040”
Context: TT-18
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-19War Bond Tungsten Project · tungstenGrade: 460Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-19
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 460
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“460”
Context: TT-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-19War Bond Tungsten Project · manganeseGrade: 4430Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-19
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 4430
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: This rock sample returned the highest manganese value, part of the broader skarn geochemical signature.
Positive factors
- High grade for surface sample
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“4430”
Context: TT-19
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-20War Bond Tungsten Project · tungstenGrade: 520Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-20
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 520
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“520”
Context: TT-20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-20War Bond Tungsten Project · manganeseGrade: 2530Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-20
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 2530
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“2530”
Context: TT-20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-21War Bond Tungsten Project · tungstenGrade: 9.92Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-21
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 9.92
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“9.92”
Context: TT-21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-21War Bond Tungsten Project · manganeseGrade: 465Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-21
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 465
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“465”
Context: TT-21
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-22War Bond Tungsten Project · tungstenGrade: 4.51Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-22
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 4.51
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“4.51”
Context: TT-22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-22War Bond Tungsten Project · manganeseGrade: 333Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-22
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 333
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“333”
Context: TT-22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-23War Bond Tungsten Project · tungstenGrade: 3.65Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-23
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3.65
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3.65”
Context: TT-23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-23War Bond Tungsten Project · manganeseGrade: 547Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-23
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 547
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“547”
Context: TT-23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-24War Bond Tungsten Project · tungstenGrade: 3.99Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-24
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3.99
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3.99”
Context: TT-24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-24War Bond Tungsten Project · manganeseGrade: 287Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-24
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 287
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“287”
Context: TT-24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-25War Bond Tungsten Project · tungstenGrade: 3.8Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-25
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3.8
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3.8”
Context: TT-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-25War Bond Tungsten Project · manganeseGrade: 220Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-25
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 220
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“220”
Context: TT-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-26War Bond Tungsten Project · tungstenGrade: 15.75Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-26
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 15.75
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“15.75”
Context: TT-26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-26War Bond Tungsten Project · manganeseGrade: 906Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-26
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 906
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“906”
Context: TT-26
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-32War Bond Tungsten Project · tungstenGrade: 1050Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-32
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 1050
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High tungsten grade from surface sample, significantly above background, supporting the exploration model.
Positive factors
- High grade for surface sample
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“1050”
Context: TT-32
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-32War Bond Tungsten Project · manganeseGrade: 3380Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-32
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3380
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3380”
Context: TT-32
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-33War Bond Tungsten Project · tungstenGrade: 460Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-33
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 460
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, contributing to the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“460”
Context: TT-33
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-33War Bond Tungsten Project · manganeseGrade: 2950Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-33
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 2950
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“2950”
Context: TT-33
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-34War Bond Tungsten Project · tungstenGrade: 830Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-34
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 830
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High tungsten grade from surface sample, significantly above background, supporting the exploration model.
Positive factors
- High grade for surface sample
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“830”
Context: TT-34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-34War Bond Tungsten Project · manganeseGrade: 3850Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-34
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3850
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: High manganese grade from surface sample, part of the broader skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3850”
Context: TT-34
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-35War Bond Tungsten Project · tungstenGrade: 3.54Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-35
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 3.54
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“3.54”
Context: TT-35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-35War Bond Tungsten Project · manganeseGrade: 150.5Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-35
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 150.5
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“150.5”
Context: TT-35
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-36War Bond Tungsten Project · tungstenGrade: 6.79Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-36
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 6.79
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“6.79”
Context: TT-36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-36War Bond Tungsten Project · manganeseGrade: 426Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-36
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 426
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“426”
Context: TT-36
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-39War Bond Tungsten Project · tungstenGrade: 64.8Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-39
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 64.8
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“64.8”
Context: TT-39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-39War Bond Tungsten Project · manganeseGrade: 183Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-39
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 183
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“183”
Context: TT-39
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-40War Bond Tungsten Project · tungstenGrade: 10.6Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-40
- Project
- War Bond Tungsten Project
- Commodity
- tungsten
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 10.6
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous tungsten grade from surface sample, part of the widespread mineralization.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“10.6”
Context: TT-40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
TT-40War Bond Tungsten Project · manganeseGrade: 193.5Grade Unit: ppmView all detailsHide details
Identity
- Hole ID
- TT-40
- Project
- War Bond Tungsten Project
- Commodity
- manganese
- Region
- usa_nv
- Reported Region
- Nevada
- Ticker
- KNOX
Geometry
- Grade
- 193.5
- Grade Unit
- ppm
Classification
- Sample Type
- surface
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-07-22T00:00:00.000Z
Reasoning: Anomalous manganese grade from surface sample, contributing to the skarn geochemical signature.
Positive factors
- Supports emerging tungsten-skarn model
- Project in top mining jurisdiction (Nevada)
- QP reviewed technical disclosure
Negative factors
- Results from surface samples only
- No true width confirmed for exposed mineralization
- Historical data not independently verified under NI 43-101
Evidence · table
“193.5”
Context: TT-40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Refractory Orenegative
Ore requires oxidation/pressure treatment before recovery — a processing and recovery risk.
Why it applies: the release describes refractory metallurgy
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.