Vendetta Reports High Grade Exploration Intersections in Zone 2 and 3 at the Pegmont Lead-Zinc Project, Queensland
Original announcement by tmx on
- Company
- Vendetta Mining Corp.
- Ticker
- VTT
- Exchange
- TSX
- Region
- Queensland
- Primary commodity
- Lead
- Secondary commodities
- Zinc, Silver
- Document categories
- Drill results
- Extracted
- 2026-09-13 07:02:30 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Vendetta Mining Corp. reported high-grade lead-zinc exploration intercepts at the Pegmont Project in Queensland, specifically in Zones 2 and 3. While drilling at the nearby Killer Bore project was suspended due to the wet season, the Pegmont results show significant mineralization extension.
Reasoning: Strong high-grade lead-zinc intercepts reported in both Zone 2 and Zone 3, demonstrating successful exploration extension.
Positive factors
- High grade lead-zinc intercepts
- Successful extension of Zone 3 and Zone 2
- QA/QC protocols disclosed
Negative factors
- Drilling at Killer Bore suspended due to weather
- Structural attenuation up dip in Zone 3
Facts used in scoring: 9
Classification and evidence
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes details on ALS laboratory, blanks, standards, and duplicates.
Evidence · text
“Blanks and commercially prepared certified reference materials (standards) were added into the sample sequence for every hole submitted.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Drilling in Zone 2 and 3 was intended to extend the mineral resource.
Evidence · text
“attempting to extend the mineral resource in that area”
Extracted facts
Stored fact records: 9. Some facts used in scoring do not have a stored record.
Drill Results (9)
PVD209Pegmont · leadGrade: 6.8Grade Unit: %Intercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- PVD209
- Project
- Pegmont
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 6.8
- Grade Unit
- %
- Intercept
- 6.8 m
- From
- 238.18 m
- To
- 247.13 m
- Intercept Depth
- 238.18 m
Classification
- Sample Type
- drill
- Group ID
- PVD209:238.18-247.13
- Mining Method
- unknown
Location
- Location
- Zone 3
- Azimuth
- 320 °
- Dip
- -63 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: Strong lead grade in a lead-zinc system.
Positive factors
- High grade lead intercept
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PVD209Pegmont · zincGrade: 2.29Grade Unit: %Intercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- PVD209
- Project
- Pegmont
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 2.29
- Grade Unit
- %
- Intercept
- 6.8 m
- From
- 238.18 m
- To
- 247.13 m
- Intercept Depth
- 238.18 m
Classification
- Sample Type
- drill
- Group ID
- PVD209:238.18-247.13
- Mining Method
- unknown
Location
- Location
- Zone 3
- Azimuth
- 320 °
- Dip
- -63 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: Solid zinc grade accompanying lead.
Positive factors
- Strong zinc grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PVD211Pegmont · leadGrade: 9.38Grade Unit: %Intercept: 5.32 mView all detailsHide details
Identity
- Hole ID
- PVD211
- Project
- Pegmont
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 9.38
- Grade Unit
- %
- Intercept
- 5.32 m
- From
- 203.78 m
- To
- 209.1 m
- Intercept Depth
- 203.78 m
Classification
- Sample Type
- drill
- Group ID
- PVD211:203.78-209.1
- Mining Method
- unknown
Location
- Location
- Zone 3
- Azimuth
- 330 °
- Dip
- -71 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: Very high grade lead intercept.
Positive factors
- Exceptional lead grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PVD211Pegmont · zincGrade: 3.05Grade Unit: %Intercept: 5.32 mView all detailsHide details
Identity
- Hole ID
- PVD211
- Project
- Pegmont
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 3.05
- Grade Unit
- %
- Intercept
- 5.32 m
- From
- 203.78 m
- To
- 209.1 m
- Intercept Depth
- 203.78 m
Classification
- Sample Type
- drill
- Group ID
- PVD211:203.78-209.1
- Mining Method
- unknown
Location
- Location
- Zone 3
- Azimuth
- 330 °
- Dip
- -71 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: High grade zinc accompanying lead.
Positive factors
- Strong zinc grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PVD213Pegmont · leadGrade: 6Grade Unit: %Intercept: 4.8 mView all detailsHide details
Identity
- Hole ID
- PVD213
- Project
- Pegmont
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 6
- Grade Unit
- %
- Intercept
- 4.8 m
- From
- 213 m
- To
- 217.8 m
- Intercept Depth
- 213 m
Classification
- Sample Type
- drill
- Group ID
- PVD213:213-217.8
- Mining Method
- unknown
Location
- Location
- Zone 3
- Azimuth
- 331 °
- Dip
- -67 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: Good lead grade.
Positive factors
- Strong lead grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PVD213Pegmont · zincGrade: 3.14Grade Unit: %Intercept: 4.8 mView all detailsHide details
Identity
- Hole ID
- PVD213
- Project
- Pegmont
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 3.14
- Grade Unit
- %
- Intercept
- 4.8 m
- From
- 213 m
- To
- 217.8 m
- Intercept Depth
- 213 m
Classification
- Sample Type
- drill
- Group ID
- PVD213:213-217.8
- Mining Method
- unknown
Location
- Location
- Zone 3
- Azimuth
- 331 °
- Dip
- -67 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: Good zinc grade.
Positive factors
- Strong zinc grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PVD218Pegmont · leadGrade: 8.88Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- PVD218
- Project
- Pegmont
- Commodity
- lead
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 8.88
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 111.86 m
- To
- 117 m
- Intercept Depth
- 111.86 m
Classification
- Sample Type
- drill
- Group ID
- PVD218:111.86-117
- Mining Method
- unknown
Location
- Location
- Zone 2
- Azimuth
- 172 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: Very high grade lead intercept.
Positive factors
- Exceptional lead grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
PVD218Pegmont · zincGrade: 3.9Grade Unit: %Intercept: 5.14 mView all detailsHide details
Identity
- Hole ID
- PVD218
- Project
- Pegmont
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 3.9
- Grade Unit
- %
- Intercept
- 5.14 m
- From
- 111.86 m
- To
- 117 m
- Intercept Depth
- 111.86 m
Classification
- Sample Type
- drill
- Group ID
- PVD218:111.86-117
- Mining Method
- unknown
Location
- Location
- Zone 2
- Azimuth
- 172 °
- Dip
- -78 °
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: High grade zinc intercept.
Positive factors
- Strong zinc grade
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
VKD001Killer Bore · zincGrade: 0.14Grade Unit: %Intercept: 4.8 mView all detailsHide details
Identity
- Hole ID
- VKD001
- Project
- Killer Bore
- Commodity
- zinc
- Region
- australia_qld
- Reported Region
- australia_qld
- Ticker
- VTT
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 4.8 m
- From
- 96.36 m
- To
- 101.16 m
- Intercept Depth
- 96.36 m
Classification
- Sample Type
- drill
- Group ID
- VKD001:96.36-101.16
- Mining Method
- unknown
QA/QC
- Laboratory
- ALS Laboratory Group
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks, duplicates
Compositing
- Dilution Disclosed
- Yes
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2023-05-18T00:00:00.000Z
Reasoning: Low grade zinc intercept at Killer Bore.
Negative factors
- Low grade intercept
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.