Wesdome Confirms New Parallel Zone at Kiena Deep and Extends Mineralization at Depth Across Multiple Eagle River Zones

Original announcement by tmx on

Company
Wesdome Gold Mines Ltd.
Ticker
WDO
Exchange
TSX
Region
Unavailable
Primary commodity
Gold
Secondary commodities
None reported
Document categories
Drill results
Extracted
2026-09-15 07:07:37 UTC

Analysis by Minestarters Atlas

Minestarters Atlas analysis

Summary

Wesdome Gold Mines announced highly positive exploration drill results from its Kiena and Eagle River mines. At Kiena Deep, a new parallel gold-bearing zone was confirmed with high-grade intercepts, indicating significant resource growth potential. At Eagle River, drilling extended mineralization at depth in multiple zones, including a bonanza-grade intercept in the 300 Zone and broad gold intervals at the Cameron Lake Iron Formation, supporting both high-grade and bulk-tonnage opportunities.

Reasoning: The drill results demonstrate significant exploration success with the discovery of a new parallel high-grade zone at Kiena Deep and substantial extensions of mineralization at depth across multiple zones at Eagle River. The high grades and broad intercepts, coupled with robust QA/QC, indicate strong potential for future resource growth and project development.

Positive factors

  • New zone discovery at Kiena Deep Norbenite Footwall, open in all directions, indicating significant resource growth potential.
  • High-grade intercepts at Kiena Deep (e.g., 64.5 g/t Au over 2.5m, 43.4 g/t Au over 3.6m) confirm continuity and growth of the system.
  • Exceptional high-grade intercept at Eagle River's 300 Zone (100 g/t Au capped over 0.52m) outside the main plunging shoot, highlighting new high-grade potential.
  • Extension of Eagle River's 800 Zone 300 meters deeper, confirming high-grade mineralization continuity.
  • Broad gold intervals at Cameron Lake Iron Formation support bulk-tonnage potential and remain open at depth and along strike.
  • Detailed QA/QC procedures disclosed, including accredited laboratories and Qualified Person sign-off, enhancing data reliability.

Negative factors

  • True widths not determined for all reported intercepts, particularly for Cameron Lake Iron Formation, which limits geological interpretation.

Low confidence — this extraction should be reviewed alongside the original source.

Facts used in scoring: 56

Extracted facts

Stored fact records: 56. Some facts used in scoring do not have a stored record.

Drill Results (56)

N033-7188Kiena · goldGrade: 9.2Grade Unit: g/tIntercept: 3.5 mView all details
Link to this fact

Identity

Hole ID
N033-7188
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
9.2
Grade Unit
g/t
Intercept
3.5 m
From
292.5 m
To
296 m
Intercept Depth
292.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N033-7188:292.5-296

Location

Location
Central Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept confirms gold mineralization at Kiena Deep with a good grade, contributing positively to the overall understanding of the deposit.

Positive factors

  • High-grade gold intercept (9.2 g/t Au) is strong for an underground gold deposit.
  • Good QA/QC disclosure and certified lab.

Negative factors

  • True width not disclosed.

Evidence · table

“9.2”

Context: 3.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N109-7204Kiena · goldGrade: 6.4Grade Unit: g/tIntercept: 7 mView all details
Link to this fact

Identity

Hole ID
N109-7204
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
6.4
Grade Unit
g/t
Intercept
7 m
From
74.5 m
To
81.5 m
Intercept Depth
74.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N109-7204:74.5-81.5

Location

Location
Central Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept demonstrates good gold mineralization and contributes positively to the project's overall prospectivity.

Positive factors

  • Strong gold grade (6.4 g/t Au) over a moderate width (7.0m) for an underground deposit.
  • Good QA/QC disclosure and certified lab.

Negative factors

  • True width not disclosed.

Evidence · table

“6.4”

Context: 7.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N127-7156Kiena · goldGrade: 7.6Grade Unit: g/tIntercept: 3 mView all details
Link to this fact

Identity

Hole ID
N127-7156
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
7.6
Grade Unit
g/t
Intercept
3 m
From
130.5 m
To
133.5 m
Intercept Depth
130.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N127-7156:130.5-133.5

Location

Location
Central Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept adds to the positive drill results at Kiena Deep, confirming gold mineralization.

Positive factors

  • Strong gold grade (7.6 g/t Au) over a moderate width (3.0m) for an underground deposit.
  • Good QA/QC disclosure and certified lab.

Negative factors

  • True width not disclosed.

Evidence · table

“7.6”

Context: 3.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7144Kiena · goldGrade: 6.1Grade Unit: g/tIntercept: 4.3 mView all details
Link to this fact

Identity

Hole ID
N134-7144
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
6.1
Grade Unit
g/t
Intercept
4.3 m
True Width
3.2 m
From
221 m
To
225.3 m
Intercept Depth
221 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7144:221-225.3

Location

Location
Basalt Zone 1
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept confirms the extension of the Basalt Zone 1, adding to the known mineralization at Kiena Deep.

Positive factors

  • Strong gold grade (6.1 g/t Au) over a good width (4.3m) with true width disclosed.
  • Extends Basalt Zone 1, indicating continuity.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“6.1”

Context: 4.3

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3.2

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152Kiena · goldGrade: 7Grade Unit: g/tIntercept: 3.7 mView all details
Link to this fact

Identity

Hole ID
N134-7152
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
7
Grade Unit
g/t
Intercept
3.7 m
True Width
3.2 m
From
316.3 m
To
320 m
Intercept Depth
316.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152:316.3-320

Location

Location
Central Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept contributes to the understanding of mineralization at Kiena Deep with a solid grade and width.

Positive factors

  • Strong gold grade (7.0 g/t Au) over a good width (3.7m) with true width disclosed.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“7.0”

Context: 3.7

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3.2

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152Kiena · goldGrade: 33.9Grade Unit: g/tIntercept: 3.4 mView all details
Link to this fact

Identity

Hole ID
N134-7152
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
33.9
Grade Unit
g/t
Intercept
3.4 m
True Width
3 m
From
429.5 m
To
432.9 m
Intercept Depth
316.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152:429.5-432.9

Location

Location
A Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept significantly enhances the known mineralization within the A Zone at Kiena Deep, indicating strong continuity.

Positive factors

  • Exceptional high-grade gold intercept (33.9 g/t Au) over a good width (3.4m) with true width disclosed.
  • Confirms continuity of A Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“33.9”

Context: 3.4

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152Kiena · goldGrade: 8.5Grade Unit: g/tIntercept: 4.7 mView all details
Link to this fact

Identity

Hole ID
N134-7152
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
8.5
Grade Unit
g/t
Intercept
4.7 m
True Width
4.1 m
From
464 m
To
468.7 m
Intercept Depth
316.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152:464-468.7

Location

Location
A1 Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept extends the A1 Zone, adding to the known high-grade mineralization at Kiena Deep.

Positive factors

  • Strong gold grade (8.5 g/t Au) over a good width (4.7m) with true width disclosed.
  • Confirms continuity of A1 Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“8.5”

Context: 4.7

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 4.1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152Kiena · goldGrade: 32.7Grade Unit: g/tIntercept: 4.3 mView all details
Link to this fact

Identity

Hole ID
N134-7152
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
32.7
Grade Unit
g/t
Intercept
4.3 m
True Width
3.8 m
From
473.4 m
To
477.7 m
Intercept Depth
316.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152:473.4-477.7

Location

Location
A2 Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept further confirms the continuity and quality of the A2 Zone at Kiena Deep.

Positive factors

  • Exceptional high-grade gold intercept (32.7 g/t Au) over a good width (4.3m) with true width disclosed.
  • Confirms continuity of A2 Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“32.7”

Context: 4.3

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3.8

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152Kiena · goldGrade: 16.1Grade Unit: g/tIntercept: 2.7 mView all details
Link to this fact

Identity

Hole ID
N134-7152
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
16.1
Grade Unit
g/t
Intercept
2.7 m
True Width
2.4 m
From
525.8 m
To
528.5 m
Intercept Depth
316.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152:525.8-528.5

Location

Location
Norbenite Footwall
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept in the Norbenite Footwall zone is a strong indicator of the new zone's potential for high-grade mineralization.

Positive factors

  • Very high-grade gold intercept (16.1 g/t Au) over a good width (2.7m) with true width disclosed.
  • Located in the newly identified Norbenite Footwall zone, indicating new potential.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“16.1”

Context: 2.7

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 2.4

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152W1Kiena · goldGrade: 44.8Grade Unit: g/tIntercept: 3.3 mView all details
Link to this fact

Identity

Hole ID
N134-7152W1
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
44.8
Grade Unit
g/t
Intercept
3.3 m
True Width
2.7 m
From
269.5 m
To
272.8 m
Intercept Depth
269.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152W1:269.5-272.8

Location

Location
A2 Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept significantly extends the A2 Zone, demonstrating continued growth of the Kiena Deep system.

Positive factors

  • Exceptional high-grade gold intercept (44.8 g/t Au) over a good width (3.3m) with true width disclosed.
  • Extends the A2 Zone by 30 metres to the east.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“44.8”

Context: 3.3

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 2.7

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152W1Kiena · goldGrade: 6.9Grade Unit: g/tIntercept: 42.1 mView all details
Link to this fact

Identity

Hole ID
N134-7152W1
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
6.9
Grade Unit
g/t
Intercept
42.1 m
True Width
34.8 m
From
287.8 m
To
329.9 m
Intercept Depth
269.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152W1:287.8-329.9

Location

Location
Norbenite Footwall
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept represents a significant new discovery at Kiena Deep, confirming a new parallel mineralized corridor with excellent width and grade, indicating substantial resource potential.

Positive factors

  • Discovery of a new parallel mineralized zone in the Norbenite Footwall, open in all directions.
  • Broad, high-grade intercept (6.9 g/t Au over 42.1m) with significant true width (34.8m).
  • Indicates potential for meaningful resource growth beyond current inventory.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“6.9”

Context: 42.1

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 34.8

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-7152W1Kiena · goldGrade: 8.3Grade Unit: g/tIntercept: 29.5 mView all details
Link to this fact

Identity

Hole ID
N134-7152W1
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
8.3
Grade Unit
g/t
Intercept
29.5 m
True Width
24.4 m
From
287.8 m
To
317.3 m
Intercept Depth
269.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-7152W1:287.8-317.3

Location

Location
Norbenite Footwall
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval within the newly discovered Norbenite Footwall zone further highlights its strong potential for significant gold mineralization.

Positive factors

  • High-grade sub-interval (8.3 g/t Au over 29.5m) within the new Norbenite Footwall zone, reinforcing its potential.
  • Significant true width (24.4m) for the sub-interval.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“8.3”

Context: 29.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 24.4

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N130-K046Kiena · goldGrade: 43.4Grade Unit: g/tIntercept: 3.6 mView all details
Link to this fact

Identity

Hole ID
N130-K046
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
43.4
Grade Unit
g/t
Intercept
3.6 m
True Width
1 m
From
86.2 m
To
89.8 m
Intercept Depth
86.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
N130-K046:86.2-89.8

Location

Location
A1 Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept in the A1 Zone reinforces the quality and continuity of mineralization at Kiena Deep.

Positive factors

  • Exceptional high-grade gold intercept (43.4 g/t Au) over a good width (3.6m) with true width disclosed.
  • Confirms continuity of A1 Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“43.4”

Context: 3.6

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-K004Kiena · goldGrade: 38.5Grade Unit: g/tIntercept: 7.4 mView all details
Link to this fact

Identity

Hole ID
N134-K004
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
38.5
Grade Unit
g/t
Intercept
7.4 m
True Width
1.7 m
From
123.3 m
To
130.7 m
Intercept Depth
123.3 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-K004:123.3-130.7

Location

Location
A Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept in the A Zone further demonstrates the quality and continuity of mineralization at Kiena Deep.

Positive factors

  • Exceptional high-grade gold intercept (38.5 g/t Au) over a good width (7.4m) with true width disclosed.
  • Confirms continuity of A Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“38.5”

Context: 7.4

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.7

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-K022Kiena · goldGrade: 64.5Grade Unit: g/tIntercept: 2.5 mView all details
Link to this fact

Identity

Hole ID
N134-K022
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
64.5
Grade Unit
g/t
Intercept
2.5 m
True Width
0.7 m
From
140.2 m
To
142.7 m
Intercept Depth
140.2 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-K022:140.2-142.7

Location

Location
A2-223 Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This bonanza-grade intercept confirms a new lens and extends the A2-223 Zone, significantly enhancing the high-grade potential of Kiena Deep.

Positive factors

  • Bonanza high-grade gold intercept (64.5 g/t Au) over a good width (2.5m) with true width disclosed.
  • Confirms new lens and up-dip extension of A2-223 Zone.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“64.5”

Context: 2.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 0.7

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-K023Kiena · goldGrade: 45.2Grade Unit: g/tIntercept: 4 mView all details
Link to this fact

Identity

Hole ID
N134-K023
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
45.2
Grade Unit
g/t
Intercept
4 m
True Width
1.7 m
From
113.5 m
To
117.5 m
Intercept Depth
113.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-K023:113.5-117.5

Location

Location
A Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept in the A Zone further reinforces the quality and continuity of mineralization at Kiena Deep.

Positive factors

  • Exceptional high-grade gold intercept (45.2 g/t Au) over a good width (4.0m) with true width disclosed.
  • Confirms continuity of A Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“45.2”

Context: 4.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.7

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-K023Kiena · goldGrade: 20.5Grade Unit: g/tIntercept: 3 mView all details
Link to this fact

Identity

Hole ID
N134-K023
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
20.5
Grade Unit
g/t
Intercept
3 m
True Width
1.3 m
From
126.2 m
To
129.2 m
Intercept Depth
113.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-K023:126.2-129.2

Location

Location
A1 Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept in the A1 Zone adds to the known mineralization at Kiena Deep.

Positive factors

  • Very high-grade gold intercept (20.5 g/t Au) over a good width (3.0m) with true width disclosed.
  • Confirms continuity of A1 Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“20.5”

Context: 3.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.3

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

N134-K023Kiena · goldGrade: 26.9Grade Unit: g/tIntercept: 3.6 mView all details
Link to this fact

Identity

Hole ID
N134-K023
Project
Kiena
Commodity
gold
Region
canada_qc
Reported Region
canada_qc
Ticker
WDO

Geometry

Grade
26.9
Grade Unit
g/t
Intercept
3.6 m
True Width
1.6 m
From
132.2 m
To
135.8 m
Intercept Depth
113.5 m

Classification

Program
mixed
Sample Type
drill
Group ID
N134-K023:132.2-135.8

Location

Location
A2-223 Zone
Loc. Source
document

QA/QC

Laboratory
ALS Minerals
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept in the A2-223 Zone further confirms the quality and continuity of mineralization at Kiena Deep.

Positive factors

  • Exceptional high-grade gold intercept (26.9 g/t Au) over a good width (3.6m) with true width disclosed.
  • Confirms continuity of A2-223 Zone mineralization.
  • Good QA/QC disclosure and certified lab.

Evidence · table

“26.9”

Context: 3.6

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.6

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

MSH-2025-035Mishi · goldGrade: 2Grade Unit: g/tIntercept: 9.5 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-035
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
2
Grade Unit
g/t
Intercept
9.5 m
True Width
9.2 m
From
7 m
To
16.5 m
Intercept Depth
7 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-035:7-16.5

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept contributes to the understanding of the Mishi deposit's potential for bulk-tonnage open pit mining.

Positive factors

  • Good gold grade (2.0 g/t Au) over a significant width (9.5m) with true width disclosed.
  • Supports potential open pit development.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“2.0”

Context: 9.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 9.2

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-035Mishi · goldGrade: 24Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-035
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
24
Grade Unit
g/t
Intercept
0.5 m
True Width
0.5 m
From
11.5 m
To
12 m
Intercept Depth
7 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-035:11.5-12

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval indicates the presence of very rich zones within the Mishi deposit.

Positive factors

  • Very high-grade gold intercept (24.0 g/t Au) over a narrow width (0.5m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“24.0”

Context: 0.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 0.5

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-040Mishi · goldGrade: 1.5Grade Unit: g/tIntercept: 14.8 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-040
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.5
Grade Unit
g/t
Intercept
14.8 m
True Width
14.4 m
From
349.2 m
To
364 m
Intercept Depth
349.2 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-040:349.2-364

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept demonstrates good continuity of mineralization at depth at Mishi, supporting resource growth.

Positive factors

  • Good gold grade (1.5 g/t Au) over a significant width (14.8m) with true width disclosed.
  • Supports potential open pit and underground resource growth at depth.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“1.5”

Context: 14.8

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 14.4

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-040Mishi · goldGrade: 3.1Grade Unit: g/tIntercept: 5.5 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-040
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
3.1
Grade Unit
g/t
Intercept
5.5 m
True Width
5.3 m
From
353.5 m
To
359 m
Intercept Depth
349.2 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-040:353.5-359

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This higher-grade sub-interval within MSH-2025-040 further enhances the prospectivity of the Mishi deposit.

Positive factors

  • Strong gold grade (3.1 g/t Au) over a good width (5.5m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“3.1”

Context: 5.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 5.3

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-041Mishi · goldGrade: 8.7Grade Unit: g/tIntercept: 5.7 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-041
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
8.7
Grade Unit
g/t
Intercept
5.7 m
True Width
5.1 m
From
207 m
To
212.7 m
Intercept Depth
207 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-041:207-212.7

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept contributes to the expansion of the Mishi mineralized system, indicating strong potential.

Positive factors

  • Very high-grade gold intercept (8.7 g/t Au) over a good width (5.7m) with true width disclosed.
  • Demonstrates continued growth of the Mishi system.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“8.7”

Context: 5.7

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 5.1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-041Mishi · goldGrade: 32.5Grade Unit: g/tIntercept: 1.3 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-041
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
32.5
Grade Unit
g/t
Intercept
1.3 m
True Width
1.1 m
From
211.5 m
To
212.7 m
Intercept Depth
207 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-041:211.5-212.7

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval highlights the presence of very rich gold mineralization within the Mishi deposit.

Positive factors

  • Exceptional high-grade gold sub-interval (32.5 g/t Au) over a narrow width (1.3m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“32.5”

Context: 1.3

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-042Mishi · goldGrade: 2.5Grade Unit: g/tIntercept: 3 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-042
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
2.5
Grade Unit
g/t
Intercept
3 m
True Width
2.6 m
From
467 m
To
470 m
Intercept Depth
467 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-042:467-470

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept adds to the overall understanding of the Mishi deposit's mineralization.

Positive factors

  • Moderate gold grade (2.5 g/t Au) over a good width (3.0m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“2.5”

Context: 3.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 2.6

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-044Mishi · goldGrade: 3.4Grade Unit: g/tIntercept: 2.9 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-044
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
3.4
Grade Unit
g/t
Intercept
2.9 m
True Width
2.3 m
From
326.6 m
To
329.5 m
Intercept Depth
326.6 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-044:326.6-329.5

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept contributes positively to the Mishi deposit's known mineralization.

Positive factors

  • Strong gold grade (3.4 g/t Au) over a good width (2.9m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“3.4”

Context: 2.9

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 2.3

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-044Mishi · goldGrade: 1.3Grade Unit: g/tIntercept: 8.5 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-044
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.3
Grade Unit
g/t
Intercept
8.5 m
True Width
6.6 m
From
450.7 m
To
459.2 m
Intercept Depth
326.6 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-044:450.7-459.2

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept adds to the understanding of the Mishi deposit's mineralization over a good width.

Positive factors

  • Moderate gold grade (1.3 g/t Au) over a significant width (8.5m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“1.3”

Context: 8.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 6.6

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-045Mishi · goldGrade: 4.2Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-045
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
4.2
Grade Unit
g/t
Intercept
1 m
True Width
0.9 m
From
289 m
To
290 m
Intercept Depth
289 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-045:289-290

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept contributes to the known mineralization at Mishi.

Positive factors

  • Strong gold grade (4.2 g/t Au) over a narrow width (1.0m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“4.2”

Context: 1.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 0.9

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-046Mishi · goldGrade: 1.8Grade Unit: g/tIntercept: 4.1 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-046
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.8
Grade Unit
g/t
Intercept
4.1 m
True Width
3.6 m
From
264.7 m
To
268.8 m
Intercept Depth
264.7 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-046:264.7-268.8

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept adds to the overall understanding of the Mishi deposit's mineralization.

Positive factors

  • Moderate gold grade (1.8 g/t Au) over a good width (4.1m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“1.8”

Context: 4.1

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3.6

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-047Mishi · goldGrade: 4.9Grade Unit: g/tIntercept: 2 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-047
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
4.9
Grade Unit
g/t
Intercept
2 m
True Width
1.9 m
From
309.4 m
To
311.4 m
Intercept Depth
309.4 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-047:309.4-311.4

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept contributes positively to the Mishi deposit's known mineralization.

Positive factors

  • Strong gold grade (4.9 g/t Au) over a good width (2.0m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“4.9”

Context: 2.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1.9

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-048Mishi · goldGrade: 1.1Grade Unit: g/tIntercept: 9.7 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-048
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.1
Grade Unit
g/t
Intercept
9.7 m
True Width
9.2 m
From
380.3 m
To
390 m
Intercept Depth
380.3 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-048:380.3-390

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept adds to the understanding of the Mishi deposit's mineralization over a good width.

Positive factors

  • Moderate gold grade (1.1 g/t Au) over a significant width (9.7m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“1.1”

Context: 9.7

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 9.2

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-049Mishi · goldGrade: 17.5Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-049
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
17.5
Grade Unit
g/t
Intercept
0.5 m
True Width
0.5 m
From
344 m
To
344.5 m
Intercept Depth
344 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-049:344-344.5

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept indicates the presence of very rich zones within the Mishi deposit, contributing to its growth potential.

Positive factors

  • Very high-grade gold intercept (17.5 g/t Au) over a narrow width (0.5m) with true width disclosed.
  • Demonstrates continued growth of the Mishi system.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“17.5”

Context: 0.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 0.5

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-049Mishi · goldGrade: 1Grade Unit: g/tIntercept: 3.8 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-049
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1
Grade Unit
g/t
Intercept
3.8 m
True Width
3.6 m
From
356.1 m
To
359.9 m
Intercept Depth
344 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-049:356.1-359.9

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept adds to the overall understanding of the Mishi deposit's mineralization.

Positive factors

  • Moderate gold grade (1.0 g/t Au) over a good width (3.8m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“1.0”

Context: 3.8

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3.6

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-050Mishi · goldGrade: 2.7Grade Unit: g/tIntercept: 4 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-050
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
2.7
Grade Unit
g/t
Intercept
4 m
True Width
3.9 m
From
444.4 m
To
448.4 m
Intercept Depth
444.4 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-050:444.4-448.4

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept contributes positively to the Mishi deposit's known mineralization.

Positive factors

  • Good gold grade (2.7 g/t Au) over a good width (4.0m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“2.7”

Context: 4.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3.9

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-050Mishi · goldGrade: 5.4Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-050
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
5.4
Grade Unit
g/t
Intercept
0.5 m
True Width
0.5 m
From
453.5 m
To
454 m
Intercept Depth
444.4 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-050:453.5-454

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept adds to the known mineralization at Mishi.

Positive factors

  • Strong gold grade (5.4 g/t Au) over a narrow width (0.5m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“5.4”

Context: 0.5

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 0.5

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-051Mishi · goldGrade: 4.2Grade Unit: g/tIntercept: 20 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-051
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
4.2
Grade Unit
g/t
Intercept
20 m
True Width
19.5 m
From
370.2 m
To
390.2 m
Intercept Depth
370.2 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-051:370.2-390.2

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This broad intercept demonstrates significant continuity of mineralization at depth at Mishi, supporting resource growth.

Positive factors

  • Strong gold grade (4.2 g/t Au) over a significant width (20.0m) with true width disclosed.
  • Supports potential open pit and underground resource growth at depth.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“4.2”

Context: 20.0

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 19.5

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

MSH-2025-051Mishi · goldGrade: 21.8Grade Unit: g/tIntercept: 3.1 mView all details
Link to this fact

Identity

Hole ID
MSH-2025-051
Project
Mishi
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
21.8
Grade Unit
g/t
Intercept
3.1 m
True Width
3 m
From
387.1 m
To
390.2 m
Intercept Depth
370.2 m

Classification

Program
exploration
Sample Type
drill
Group ID
MSH-2025-051:387.1-390.2

Location

Location
Mishi
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval highlights the presence of very rich gold mineralization within the Mishi deposit.

Positive factors

  • Very high-grade gold sub-interval (21.8 g/t Au) over a good width (3.1m) with true width disclosed.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“21.8”

Context: 3.1

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 3

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-269Cameron Lake Iron Formation · goldGrade: 1.1Grade Unit: g/tIntercept: 41 mView all details
Link to this fact

Identity

Hole ID
GS-25-269
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.1
Grade Unit
g/t
Intercept
41 m
From
133 m
To
174 m
Intercept Depth
133 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-269:133-174

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This broad intercept indicates significant bulk-tonnage potential at Cameron Lake Iron Formation, extending the known mineralization.

Positive factors

  • Broad gold interval (41.0m) with moderate grade (1.1 g/t Au) supporting bulk-tonnage potential.
  • Confirms zone remains open at depth and along strike.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“1.1”

Context: 41.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-269Cameron Lake Iron Formation · goldGrade: 1.9Grade Unit: g/tIntercept: 7 mView all details
Link to this fact

Identity

Hole ID
GS-25-269
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.9
Grade Unit
g/t
Intercept
7 m
From
152 m
To
159 m
Intercept Depth
133 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-269:152-159

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This sub-interval contributes to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Moderate gold grade (1.9 g/t Au) over a good width (7.0m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“1.9”

Context: 7.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-269Cameron Lake Iron Formation · goldGrade: 8.4Grade Unit: g/tIntercept: 2 mView all details
Link to this fact

Identity

Hole ID
GS-25-269
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
8.4
Grade Unit
g/t
Intercept
2 m
From
172 m
To
174 m
Intercept Depth
133 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-269:172-174

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval indicates the presence of richer zones within the bulk-tonnage target at Cameron Lake Iron Formation.

Positive factors

  • Very high-grade gold intercept (8.4 g/t Au) over a narrow width (2.0m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“8.4”

Context: 2.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-272Cameron Lake Iron Formation · goldGrade: 1.2Grade Unit: g/tIntercept: 61.5 mView all details
Link to this fact

Identity

Hole ID
GS-25-272
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.2
Grade Unit
g/t
Intercept
61.5 m
From
101.1 m
To
162.6 m
Intercept Depth
101.1 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-272:101.1-162.6

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This very broad intercept further highlights the significant bulk-tonnage potential at Cameron Lake Iron Formation, extending the known mineralization.

Positive factors

  • Very broad gold interval (61.5m) with moderate grade (1.2 g/t Au) supporting bulk-tonnage potential.
  • Confirms zone remains open at depth and along strike.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“1.2”

Context: 61.5

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-272Cameron Lake Iron Formation · goldGrade: 3.4Grade Unit: g/tIntercept: 2 mView all details
Link to this fact

Identity

Hole ID
GS-25-272
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
3.4
Grade Unit
g/t
Intercept
2 m
From
103.1 m
To
105.1 m
Intercept Depth
101.1 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-272:103.1-105.1

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This sub-interval contributes to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Strong gold grade (3.4 g/t Au) over a narrow width (2.0m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“3.4”

Context: 2.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-272Cameron Lake Iron Formation · goldGrade: 2.4Grade Unit: g/tIntercept: 5 mView all details
Link to this fact

Identity

Hole ID
GS-25-272
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
2.4
Grade Unit
g/t
Intercept
5 m
From
117 m
To
122 m
Intercept Depth
101.1 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-272:117-122

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This sub-interval contributes to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Moderate gold grade (2.4 g/t Au) over a good width (5.0m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“2.4”

Context: 5.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-272Cameron Lake Iron Formation · goldGrade: 8.8Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
GS-25-272
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
8.8
Grade Unit
g/t
Intercept
1 m
From
132 m
To
133 m
Intercept Depth
101.1 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-272:132-133

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval indicates the presence of richer zones within the bulk-tonnage target at Cameron Lake Iron Formation.

Positive factors

  • Very high-grade gold intercept (8.8 g/t Au) over a narrow width (1.0m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“8.8”

Context: 1.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-276Cameron Lake Iron Formation · goldGrade: 1Grade Unit: g/tIntercept: 38.7 mView all details
Link to this fact

Identity

Hole ID
GS-25-276
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1
Grade Unit
g/t
Intercept
38.7 m
From
208 m
To
246.7 m
Intercept Depth
208 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-276:208-246.7

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This broad intercept further highlights the significant bulk-tonnage potential at Cameron Lake Iron Formation, extending the known mineralization.

Positive factors

  • Broad gold interval (38.7m) with moderate grade (1.0 g/t Au) supporting bulk-tonnage potential.
  • Confirms zone remains open at depth and along strike.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“1.0”

Context: 38.7

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-276Cameron Lake Iron Formation · goldGrade: 7.3Grade Unit: g/tIntercept: 1 mView all details
Link to this fact

Identity

Hole ID
GS-25-276
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
7.3
Grade Unit
g/t
Intercept
1 m
From
208 m
To
209 m
Intercept Depth
208 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-276:208-209

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval indicates the presence of richer zones within the bulk-tonnage target at Cameron Lake Iron Formation.

Positive factors

  • Very high-grade gold intercept (7.3 g/t Au) over a narrow width (1.0m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“7.3”

Context: 1.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-276Cameron Lake Iron Formation · goldGrade: 3.7Grade Unit: g/tIntercept: 3.2 mView all details
Link to this fact

Identity

Hole ID
GS-25-276
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
3.7
Grade Unit
g/t
Intercept
3.2 m
From
220.3 m
To
223.5 m
Intercept Depth
208 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-276:220.3-223.5

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This sub-interval contributes to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Strong gold grade (3.7 g/t Au) over a good width (3.2m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“3.7”

Context: 3.2

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-276Cameron Lake Iron Formation · goldGrade: 5.7Grade Unit: g/tIntercept: 1.4 mView all details
Link to this fact

Identity

Hole ID
GS-25-276
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
5.7
Grade Unit
g/t
Intercept
1.4 m
From
221.3 m
To
222.7 m
Intercept Depth
208 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-276:221.3-222.7

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This sub-interval contributes to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Strong gold grade (5.7 g/t Au) over a narrow width (1.4m) within a broader interval.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“5.7”

Context: 1.4

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-278Cameron Lake Iron Formation · goldGrade: 1Grade Unit: g/tIntercept: 21.4 mView all details
Link to this fact

Identity

Hole ID
GS-25-278
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1
Grade Unit
g/t
Intercept
21.4 m
From
186.9 m
To
208.3 m
Intercept Depth
186.9 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-278:186.9-208.3

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This broad intercept adds to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Broad gold interval (21.4m) with moderate grade (1.0 g/t Au) supporting bulk-tonnage potential.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“1.0”

Context: 21.4

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-282Cameron Lake Iron Formation · goldGrade: 0.9Grade Unit: g/tIntercept: 66 mView all details
Link to this fact

Identity

Hole ID
GS-25-282
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
0.9
Grade Unit
g/t
Intercept
66 m
From
180 m
To
246 m
Intercept Depth
180 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-282:180-246

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This very broad intercept further reinforces the significant bulk-tonnage potential at Cameron Lake Iron Formation.

Positive factors

  • Very broad gold interval (66.0m) with moderate grade (0.9 g/t Au) supporting bulk-tonnage potential.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“0.9”

Context: 66.0

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-282Cameron Lake Iron Formation · goldGrade: 1.2Grade Unit: g/tIntercept: 19.9 mView all details
Link to this fact

Identity

Hole ID
GS-25-282
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.2
Grade Unit
g/t
Intercept
19.9 m
From
180 m
To
199.9 m
Intercept Depth
180 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-282:180-199.9

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This sub-interval contributes to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Broad gold interval (19.9m) with moderate grade (1.2 g/t Au) within a broader intercept.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“1.2”

Context: 19.9

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

GS-25-282Cameron Lake Iron Formation · goldGrade: 1.6Grade Unit: g/tIntercept: 12.9 mView all details
Link to this fact

Identity

Hole ID
GS-25-282
Project
Cameron Lake Iron Formation
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
1.6
Grade Unit
g/t
Intercept
12.9 m
From
220.1 m
To
233 m
Intercept Depth
180 m

Classification

Program
exploration
Sample Type
drill
Group ID
GS-25-282:220.1-233

Location

Location
Iron Formation
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This sub-interval contributes to the bulk-tonnage potential of the Cameron Lake Iron Formation.

Positive factors

  • Broad gold interval (12.9m) with moderate grade (1.6 g/t Au) within a broader intercept.
  • Good QA/QC disclosure and accredited lab.

Negative factors

  • True width not determined.

Evidence · table

“1.6”

Context: 12.9

Tags used in scoring

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

ERS-2026-001Eagle River · goldGrade: 12.9Grade Unit: g/tIntercept: 1.5 mView all details
Link to this fact

Identity

Hole ID
ERS-2026-001
Project
Eagle River
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
12.9
Grade Unit
g/t
Intercept
1.5 m
True Width
1 m
From
1514 m
To
1516 m
Intercept Depth
1514 m

Classification

Program
exploration
Sample Type
drill
Group ID
ERS-2026-001:1514-1516

Location

Location
800 Zone Deep
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This intercept represents a significant step-out, extending the high-grade 800 Zone at depth and opening new exploration targets.

Positive factors

  • Very high-grade gold intercept (12.9 g/t Au) over a good width (1.5m) with true width disclosed.
  • Extends the 800 Zone approximately 300 metres deeper than existing model, indicating significant growth potential.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“12.9”

Context: 1.50

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

ERS-2026-001Eagle River · goldGrade: 36.1Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
ERS-2026-001
Project
Eagle River
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
36.1
Grade Unit
g/t
Intercept
0.5 m
True Width
1 m
From
1515 m
To
1515.5 m
Intercept Depth
1514 m

Classification

Program
exploration
Sample Type
drill
Group ID
ERS-2026-001:1515-1515.5

Location

Location
800 Zone Deep
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade sub-interval further enhances the significance of the 800 Zone extension at depth.

Positive factors

  • Exceptional high-grade gold sub-interval (36.1 g/t Au) over a narrow width (0.5m) within a deeper extension.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“36.1”

Context: 0.50

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 1

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

ERS-2026-003Eagle River · goldGrade: 31.9Grade Unit: g/tIntercept: 0.5 mView all details
Link to this fact

Identity

Hole ID
ERS-2026-003
Project
Eagle River
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
31.9
Grade Unit
g/t
Intercept
0.5 m
True Width
0.16 m
From
605 m
To
605.5 m
Intercept Depth
605 m

Classification

Program
exploration
Sample Type
drill
Group ID
ERS-2026-003:605-605.5

Location

Location
6 Central Deep
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This high-grade intercept in the 6 Central Zone, found in a new host rock, indicates broader exploration potential for the Eagle River deformation zone.

Positive factors

  • Exceptional high-grade gold intercept (31.9 g/t Au) over a narrow width (0.5m) with true width disclosed.
  • Found outside the diorite, reinforcing broader exploration potential.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“31.9”

Context: 0.50

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 0.16

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

25-1201-20Eagle River · goldGrade: 100Grade Unit: g/tIntercept: 0.52 mView all details
Link to this fact

Identity

Hole ID
25-1201-20
Project
Eagle River
Commodity
gold
Region
canada_on
Reported Region
canada_on
Ticker
WDO

Geometry

Grade
100
Grade Unit
g/t
Intercept
0.52 m
True Width
0.35 m
From
583.8 m
To
584.32 m
Intercept Depth
583.8 m

Classification

Program
mixed
Sample Type
drill
Group ID
25-1201-20:583.8-584.32

Location

Location
300 Zone
Loc. Source
document

QA/QC

Laboratory
AGAT Laboratories
QA/QC Disclosed
Yes
Lab Certified
Yes
QP Signed
Yes
QA/QC Methods
standards, blanks, duplicates

Review

Needs Review
No
Interp. Status
scored
Historical
No

Dates

Event date
2026-06-22T00:00:00.000Z

Reasoning: This bonanza-grade intercept represents a significant new high-grade discovery outside the known 300 Zone corridor, indicating substantial untapped potential at Eagle River.

Positive factors

  • Bonanza high-grade gold intercept (100 g/t Au capped, 618.2 g/t Au uncapped) over a narrow width (0.52m) with true width disclosed.
  • Located 70 metres east and outside of the main 300 Zone plunging high-grade corridor, highlighting new high-grade potential.
  • Good QA/QC disclosure and accredited lab.

Evidence · table

“100.0”

Context: 0.52

Tags used in scoring

True Width Disclosedpositive

Actual thickness perpendicular to structure is stated, not just downhole length.

Why it applies: true_width_m is 0.35

QA/QC Disclosedpositive

Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).

Why it applies: qaqc_disclosed is true

Cut-off Undisclosednegative

High-grade interval reported without stating the cut-off grade used for compositing.

Why it applies: no cutoff_grade was stated

Infill Drillingneutral

Confirmatory drilling to raise resource confidence, not new discovery.

Why it applies: drill_program_type is "mixed"

How Atlas produces this analysis

Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.