XXIX Delivers Strong Gold-Copper Results at Cooke, Advancing Potential Satellite Feed for Opemiska
Original announcement by tmx on
- Company
- XXIX Metal Corp
- Ticker
- XXIX
- Exchange
- TSX
- Region
- Quebec
- Primary commodity
- Gold
- Secondary commodities
- Copper, Silver
- Document categories
- Drill results, Economic study, Resource update
- Extracted
- 2026-09-17 06:51:10 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
XXIX Metal Corp. announced strong initial gold-copper-silver drill results from its Cooke Zone, located near the Opemiska open pit. The drilling confirmed two parallel shear-hosted mineralized zones, with several high-grade intercepts, including 6.82 g/t gold over 1.90 metres and 4.14% copper over 1.20 metres. These results support the potential for Cooke to become a satellite deposit and the company plans tighter-spaced drilling to advance towards a maiden Mineral Resource Estimate.
Reasoning: Initial drill results from the Cooke Zone confirm significant gold-copper-silver mineralization in two parallel shear-hosted zones, with several high-grade intercepts, supporting the potential for a maiden Mineral Resource Estimate and satellite feed for the Opemiska project. The results are positive but true widths are not yet determined.
Positive factors
- Strong gold and copper grades in several intercepts
- Confirmation of two parallel mineralized zones, indicating continuity
- Potential for Cooke Zone to become a satellite feed for the Opemiska open pit
- Advancing towards a maiden Mineral Resource Estimate (MRE)
- Comprehensive QA/QC procedures disclosed and QP signed off
Negative factors
- True widths of intercepts are unknown, potentially overstating thickness
- Early stage of the project, with maiden MRE still to be completed
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 126
Classification and evidence
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole COR-25-41 returned 6.82 g/t gold over 1.90 metres, which is above the exceptional threshold for gold in an open pit setting.
Evidence · table
“6.82”
Context: 1.90
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole COR-25-42 returned 3.07 g/t gold over 4.20 metres, which is above the strong threshold for gold in an open pit setting.
Evidence · table
“3.07”
Context: 4.20
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole COR-25-38 returned 3.63 g/t gold over 6.40 metres, which is above the strong threshold for gold in an open pit setting.
Evidence · table
“3.63”
Context: 6.40
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole COR-25-48 returned 3.39 g/t gold over 13.10 metres, which is above the strong threshold for gold in an open pit setting.
Evidence · table
“3.39”
Context: 13.10
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole COR-25-49 returned 2.75% copper over 2.10 metres, which is above the exceptional threshold for copper in an open pit setting.
Evidence · table
“2.75”
Context: 2.10
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Hole COR-25-22 returned 4.14% copper over 1.20 metres, which is above the exceptional threshold for copper in an open pit setting.
Evidence · table
“4.14”
Context: 1.20
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: The document explicitly states that 'True thickness are unknown' for the reported intercepts.
Evidence · text
“True thickness are unknown.”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: The release includes a 'Quality Control and Assurance' section detailing sample handling, laboratory, and assay methods, and mentions a QP sign-off.
Evidence · text
“Quality Control and Assurance All samples (NQ core) are logged and cut in two at the company secure facility in Chapais, under the supervision of Ahcene Gaoui, p.geo., project geologist. The samples are sent to Agat laboratories in Val-d'Or by a secure transport. One standard and one blank are inserted in every 50 samples, the blank always in a mineralized zone. The analytic method used is fire assay, trace Au, AAS finish and Fire assay, Au grade with gravimetric finish for over limit results. We use Aqua regia digest, metals package ICP OES finish for Cu and Ag with ICP-MS finish for over limit results. QP Statement The technical information contained in this news release has been reviewed and approved by Denis McNichols, P.Geo and géo., Vice President Exploration for XXIX Metal, a Qualified Person, as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects.”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: The drilling is described as 'initial drill results' and aims to 'advance Cooke toward a Maiden Mineral Resource Estimate', implying extension beyond previously defined areas.
Evidence · text
“initial drill results from the Cooke Zone, located approximately 2 kilometres east of the Company's envisioned Opemiska open pit. These early results confirm that Cooke hosts meaningful gold-copper-silver mineralization and highlight the potential for Cooke to emerge as a satellite deposit capable of providing incremental mill feed to the broader Opemiska development concept.”
Maiden Resourceneutral
First formal MRE for the project — establishes baseline but typically exploration-stage with high Inferred component. No prior estimate exists, so every change band is not applicable.
Why it applies: The company explicitly states its plan to 'advance Cooke toward a Maiden Mineral Resource Estimate (MRE)'.
Evidence · text
“advance Cooke toward a Maiden Mineral Resource Estimate (MRE)”
Extracted facts
Stored fact records: 126. Some facts used in scoring do not have a stored record.
Drill Results (126)
COR-25-31Cooke Zone · goldGrade: 0.76Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-31
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.76
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 70.75 m
- To
- 73.25 m
- Hole Depth
- 180 m
- Intercept Depth
- 70.75 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-31:70.75-73.25
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 512930
- Northing
- 5515428
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow width, contributing to the overall understanding of the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.76”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-31Cooke Zone · silverGrade: 1Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-31
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 70.75 m
- To
- 73.25 m
- Hole Depth
- 180 m
- Intercept Depth
- 70.75 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-31:70.75-73.25
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 512930
- Northing
- 5515428
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, contributing to the overall understanding of the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“1.00”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-31Cooke Zone · copperGrade: 0.02Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-31
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.02
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 70.75 m
- To
- 73.25 m
- Hole Depth
- 180 m
- Intercept Depth
- 70.75 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-31:70.75-73.25
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 512930
- Northing
- 5515428
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a narrow width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.02”
Context: 2.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-31Cooke Zone · goldGrade: 0.01Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-31
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 110.7 m
- To
- 115.7 m
- Hole Depth
- 180 m
- Intercept Depth
- 110.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-31:110.7-115.7
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 512930
- Northing
- 5515428
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a moderate width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.01”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-31Cooke Zone · silverGrade: 2.66Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-31
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.66
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 110.7 m
- To
- 115.7 m
- Hole Depth
- 180 m
- Intercept Depth
- 110.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-31:110.7-115.7
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 512930
- Northing
- 5515428
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“2.66”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-31Cooke Zone · copperGrade: 0.22Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-31
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.22
- Grade Unit
- %
- Intercept
- 5 m
- From
- 110.7 m
- To
- 115.7 m
- Hole Depth
- 180 m
- Intercept Depth
- 110.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-31:110.7-115.7
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 512930
- Northing
- 5515428
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -57 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.22”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-33Cooke Zone · goldGrade: 0.05Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-33
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 199 m
- To
- 204.5 m
- Hole Depth
- 291 m
- Intercept Depth
- 199 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-33:199-204.5
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513070
- Northing
- 5515470
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a moderate width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.05”
Context: 5.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-33Cooke Zone · silverGrade: 1.69Grade Unit: g/tIntercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-33
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.69
- Grade Unit
- g/t
- Intercept
- 5.5 m
- From
- 199 m
- To
- 204.5 m
- Hole Depth
- 291 m
- Intercept Depth
- 199 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-33:199-204.5
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513070
- Northing
- 5515470
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“1.69”
Context: 5.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-33Cooke Zone · copperGrade: 0.11Grade Unit: %Intercept: 5.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-33
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 5.5 m
- From
- 199 m
- To
- 204.5 m
- Hole Depth
- 291 m
- Intercept Depth
- 199 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-33:199-204.5
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513070
- Northing
- 5515470
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.11”
Context: 5.50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-33Cooke Zone · goldGrade: 0.26Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-33
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 220.5 m
- To
- 224.5 m
- Hole Depth
- 291 m
- Intercept Depth
- 220.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-33:220.5-224.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513070
- Northing
- 5515470
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak gold grade over a narrow width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.26”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-33Cooke Zone · silverGrade: 0.28Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-33
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 220.5 m
- To
- 224.5 m
- Hole Depth
- 291 m
- Intercept Depth
- 220.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-33:220.5-224.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513070
- Northing
- 5515470
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“0.28”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-33Cooke Zone · copperGrade: 0.04Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-33
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 4 m
- From
- 220.5 m
- To
- 224.5 m
- Hole Depth
- 291 m
- Intercept Depth
- 220.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-33:220.5-224.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513070
- Northing
- 5515470
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a narrow width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.04”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-34Cooke Zone · goldGrade: 0.78Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-34
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.78
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 162 m
- To
- 165 m
- Hole Depth
- 270 m
- Intercept Depth
- 162 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-34:162-165
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513140
- Northing
- 5515405
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow width, contributing to the overall understanding of the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.78”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-34Cooke Zone · silverGrade: 3.4Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-34
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 162 m
- To
- 165 m
- Hole Depth
- 270 m
- Intercept Depth
- 162 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-34:162-165
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513140
- Northing
- 5515405
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“3.40”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-34Cooke Zone · copperGrade: 0.24Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-34
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 3 m
- From
- 162 m
- To
- 165 m
- Hole Depth
- 270 m
- Intercept Depth
- 162 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-34:162-165
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513140
- Northing
- 5515405
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a narrow width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.24”
Context: 3.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-34Cooke Zone · goldGrade: 1.15Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- COR-25-34
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.15
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 232 m
- To
- 238 m
- Hole Depth
- 270 m
- Intercept Depth
- 232 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-34:232-238
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513140
- Northing
- 5515405
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate width, contributing positively to the South Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“1.15”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-34Cooke Zone · silverGrade: 2.7Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- COR-25-34
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 232 m
- To
- 238 m
- Hole Depth
- 270 m
- Intercept Depth
- 232 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-34:232-238
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513140
- Northing
- 5515405
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“2.70”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-34Cooke Zone · copperGrade: 0.28Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- COR-25-34
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 6 m
- From
- 232 m
- To
- 238 m
- Hole Depth
- 270 m
- Intercept Depth
- 232 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-34:232-238
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513140
- Northing
- 5515405
- Elevation
- 394 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a moderate width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.28”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-35Cooke Zone · goldGrade: 0.61Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-35
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.61
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 173 m
- To
- 174 m
- Hole Depth
- 255 m
- Intercept Depth
- 173 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-35:173-174
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513245
- Northing
- 5515370
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a very narrow width, contributing to the overall understanding of the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.61”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-35Cooke Zone · silverGrade: 8.13Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-35
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 8.13
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 173 m
- To
- 174 m
- Hole Depth
- 255 m
- Intercept Depth
- 173 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-35:173-174
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513245
- Northing
- 5515370
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a very narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“8.13”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-35Cooke Zone · copperGrade: 0.53Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-35
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.53
- Grade Unit
- %
- Intercept
- 1 m
- From
- 173 m
- To
- 174 m
- Hole Depth
- 255 m
- Intercept Depth
- 173 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-35:173-174
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513245
- Northing
- 5515370
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate copper grade over a very narrow width, contributing positively to the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.53”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-35Cooke Zone · goldGrade: 2.52Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-25-35
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.52
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 243 m
- To
- 250 m
- Hole Depth
- 255 m
- Intercept Depth
- 243 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-35:243-250
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513245
- Northing
- 5515370
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Strong gold grade over a moderate width, indicating significant mineralization in the South Zone.
Negative factors
- True width unknown
Evidence · table
“2.52”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-35Cooke Zone · silverGrade: 2.41Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-25-35
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.41
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 243 m
- To
- 250 m
- Hole Depth
- 255 m
- Intercept Depth
- 243 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-35:243-250
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513245
- Northing
- 5515370
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“2.41”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-35Cooke Zone · copperGrade: 0.36Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-25-35
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 7 m
- From
- 243 m
- To
- 250 m
- Hole Depth
- 255 m
- Intercept Depth
- 243 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-35:243-250
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513245
- Northing
- 5515370
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a moderate width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.36”
Context: 7.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-36Cooke Zone · goldGrade: 0.01Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-36
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 50 m
- To
- 51 m
- Hole Depth
- 168 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-36:50-51
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513093
- Northing
- 5515335
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a very narrow width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.01”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-36Cooke Zone · silverGrade: 1.1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-36
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 50 m
- To
- 51 m
- Hole Depth
- 168 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-36:50-51
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513093
- Northing
- 5515335
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a very narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“1.10”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-36Cooke Zone · copperGrade: 0.2Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-36
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.2
- Grade Unit
- %
- Intercept
- 1 m
- From
- 50 m
- To
- 51 m
- Hole Depth
- 168 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-36:50-51
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513093
- Northing
- 5515335
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a very narrow width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.20”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-36Cooke Zone · goldGrade: 0.21Grade Unit: g/tIntercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- COR-25-36
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 6.8 m
- From
- 122 m
- To
- 128.8 m
- Hole Depth
- 168 m
- Intercept Depth
- 122 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-36:122-128.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513093
- Northing
- 5515335
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak gold grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.21”
Context: 6.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-36Cooke Zone · silverGrade: 0.74Grade Unit: g/tIntercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- COR-25-36
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.74
- Grade Unit
- g/t
- Intercept
- 6.8 m
- From
- 122 m
- To
- 128.8 m
- Hole Depth
- 168 m
- Intercept Depth
- 122 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-36:122-128.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513093
- Northing
- 5515335
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“0.74”
Context: 6.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-36Cooke Zone · copperGrade: 0.05Grade Unit: %Intercept: 6.8 mView all detailsHide details
Identity
- Hole ID
- COR-25-36
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.05
- Grade Unit
- %
- Intercept
- 6.8 m
- From
- 122 m
- To
- 128.8 m
- Hole Depth
- 168 m
- Intercept Depth
- 122 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-36:122-128.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513093
- Northing
- 5515335
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.05”
Context: 6.80
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-37Cooke Zone · goldGrade: 0.07Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-37
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 37 m
- To
- 41 m
- Hole Depth
- 156 m
- Intercept Depth
- 37 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-37:37-41
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513122
- Northing
- 5515301
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a narrow width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.07”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-37Cooke Zone · silverGrade: 1.38Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-37
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.38
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 37 m
- To
- 41 m
- Hole Depth
- 156 m
- Intercept Depth
- 37 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-37:37-41
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513122
- Northing
- 5515301
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“1.38”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-37Cooke Zone · copperGrade: 0.33Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-37
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 4 m
- From
- 37 m
- To
- 41 m
- Hole Depth
- 156 m
- Intercept Depth
- 37 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-37:37-41
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513122
- Northing
- 5515301
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a narrow width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.33”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-37Cooke Zone · goldGrade: 3.4Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-37
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.4
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 83.6 m
- To
- 90 m
- Hole Depth
- 156 m
- Intercept Depth
- 83.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-37:83.6-90
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513122
- Northing
- 5515301
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Strong gold grade over a moderate width, indicating significant mineralization in the South Zone.
Negative factors
- True width unknown
Evidence · table
“3.40”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-37Cooke Zone · silverGrade: 3.5Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-37
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 83.6 m
- To
- 90 m
- Hole Depth
- 156 m
- Intercept Depth
- 83.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-37:83.6-90
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513122
- Northing
- 5515301
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“3.50”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-37Cooke Zone · copperGrade: 0.33Grade Unit: %Intercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-37
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.33
- Grade Unit
- %
- Intercept
- 6.4 m
- From
- 83.6 m
- To
- 90 m
- Hole Depth
- 156 m
- Intercept Depth
- 83.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-37:83.6-90
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513122
- Northing
- 5515301
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a moderate width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.33”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-38Cooke Zone · goldGrade: 3.63Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-38
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.63
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 61.2 m
- To
- 67.6 m
- Hole Depth
- 132 m
- Intercept Depth
- 61.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-38:61.2-67.6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513225
- Northing
- 5515268
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Strong gold grade over a moderate width, indicating significant mineralization in the North Zone.
Positive factors
- Strong gold grade
Negative factors
- True width unknown
Evidence · table
“3.63”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-38Cooke Zone · silverGrade: 3.5Grade Unit: g/tIntercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-38
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 6.4 m
- From
- 61.2 m
- To
- 67.6 m
- Hole Depth
- 132 m
- Intercept Depth
- 61.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-38:61.2-67.6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513225
- Northing
- 5515268
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“3.50”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-38Cooke Zone · copperGrade: 0.27Grade Unit: %Intercept: 6.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-38
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 6.4 m
- From
- 61.2 m
- To
- 67.6 m
- Hole Depth
- 132 m
- Intercept Depth
- 61.2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-38:61.2-67.6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513225
- Northing
- 5515268
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a moderate width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.27”
Context: 6.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-38Cooke Zone · goldGrade: 0.28Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- COR-25-38
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 108.5 m
- To
- 114.5 m
- Hole Depth
- 132 m
- Intercept Depth
- 108.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-38:108.5-114.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513225
- Northing
- 5515268
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak gold grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.28”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-38Cooke Zone · silverGrade: 1.04Grade Unit: g/tIntercept: 6 mView all detailsHide details
Identity
- Hole ID
- COR-25-38
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.04
- Grade Unit
- g/t
- Intercept
- 6 m
- From
- 108.5 m
- To
- 114.5 m
- Hole Depth
- 132 m
- Intercept Depth
- 108.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-38:108.5-114.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513225
- Northing
- 5515268
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“1.04”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-38Cooke Zone · copperGrade: 0.21Grade Unit: %Intercept: 6 mView all detailsHide details
Identity
- Hole ID
- COR-25-38
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.21
- Grade Unit
- %
- Intercept
- 6 m
- From
- 108.5 m
- To
- 114.5 m
- Hole Depth
- 132 m
- Intercept Depth
- 108.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-38:108.5-114.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513225
- Northing
- 5515268
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.21”
Context: 6.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-39Cooke Zone · goldGrade: 0.15Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-39
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 41 m
- To
- 42 m
- Hole Depth
- 159 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-39:41-42
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513181
- Northing
- 5515275
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a very narrow width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.15”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-39Cooke Zone · silverGrade: 3Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-39
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 41 m
- To
- 42 m
- Hole Depth
- 159 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-39:41-42
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513181
- Northing
- 5515275
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a very narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“3.00”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-39Cooke Zone · copperGrade: 0.31Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-25-39
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 1 m
- From
- 41 m
- To
- 42 m
- Hole Depth
- 159 m
- Intercept Depth
- 41 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-39:41-42
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513181
- Northing
- 5515275
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a very narrow width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.31”
Context: 1.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-39Cooke Zone · goldGrade: 0.54Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-39
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.54
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 109 m
- To
- 114 m
- Hole Depth
- 159 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-39:109-114
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513181
- Northing
- 5515275
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate width, contributing to the overall understanding of the South Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.54”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-39Cooke Zone · silverGrade: 0.26Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-39
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 109 m
- To
- 114 m
- Hole Depth
- 159 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-39:109-114
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513181
- Northing
- 5515275
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“0.26”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-39Cooke Zone · copperGrade: 0.04Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-39
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5 m
- From
- 109 m
- To
- 114 m
- Hole Depth
- 159 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-39:109-114
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513181
- Northing
- 5515275
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.04”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-40Cooke Zone · goldGrade: 1.21Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-40
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.21
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 52.3 m
- To
- 57.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 52.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-40:52.3-57.3
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513244
- Northing
- 5515251
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate width, contributing positively to the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“1.21”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-40Cooke Zone · silverGrade: 0.68Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-40
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.68
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 52.3 m
- To
- 57.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 52.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-40:52.3-57.3
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513244
- Northing
- 5515251
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“0.68”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-40Cooke Zone · copperGrade: 0.04Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-40
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 5 m
- From
- 52.3 m
- To
- 57.3 m
- Hole Depth
- 174 m
- Intercept Depth
- 52.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-40:52.3-57.3
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513244
- Northing
- 5515251
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a moderate width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.04”
Context: 5.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-40Cooke Zone · goldGrade: 1.31Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- COR-25-40
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.31
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 116.9 m
- To
- 118.9 m
- Hole Depth
- 174 m
- Intercept Depth
- 116.9 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-40:116.9-118.9
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513244
- Northing
- 5515251
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a narrow width, contributing positively to the South Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“1.31”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-40Cooke Zone · silverGrade: 5.4Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- COR-25-40
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 5.4
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 116.9 m
- To
- 118.9 m
- Hole Depth
- 174 m
- Intercept Depth
- 116.9 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-40:116.9-118.9
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513244
- Northing
- 5515251
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“5.40”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-40Cooke Zone · copperGrade: 0.28Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- COR-25-40
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 2 m
- From
- 116.9 m
- To
- 118.9 m
- Hole Depth
- 174 m
- Intercept Depth
- 116.9 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-40:116.9-118.9
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513244
- Northing
- 5515251
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a narrow width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.28”
Context: 2.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-41Cooke Zone · goldGrade: 0.18Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- COR-25-41
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 51.5 m
- To
- 53.1 m
- Hole Depth
- 192 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-41:51.5-53.1
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513449
- Northing
- 5515119
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a very narrow width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.18”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-41Cooke Zone · silverGrade: 3.88Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- COR-25-41
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.88
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 51.5 m
- To
- 53.1 m
- Hole Depth
- 192 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-41:51.5-53.1
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513449
- Northing
- 5515119
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a very narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“3.88”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-41Cooke Zone · copperGrade: 0.75Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- COR-25-41
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.75
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 51.5 m
- To
- 53.1 m
- Hole Depth
- 192 m
- Intercept Depth
- 51.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-41:51.5-53.1
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513449
- Northing
- 5515119
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate copper grade over a very narrow width, contributing positively to the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.75”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-41Cooke Zone · goldGrade: 6.82Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- COR-25-41
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 6.82
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 88.7 m
- To
- 90.6 m
- Hole Depth
- 192 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-41:88.7-90.6
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513449
- Northing
- 5515119
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Exceptional gold grade over a very narrow width, indicating high-grade mineralization in the South Zone.
Positive factors
- Exceptional gold grade
Negative factors
- True width unknown
Evidence · table
“6.82”
Context: 1.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-41Cooke Zone · silverGrade: 1.99Grade Unit: g/tIntercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- COR-25-41
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.99
- Grade Unit
- g/t
- Intercept
- 1.9 m
- From
- 88.7 m
- To
- 90.6 m
- Hole Depth
- 192 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-41:88.7-90.6
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513449
- Northing
- 5515119
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a very narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“1.99”
Context: 1.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-41Cooke Zone · copperGrade: 0.03Grade Unit: %Intercept: 1.9 mView all detailsHide details
Identity
- Hole ID
- COR-25-41
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 1.9 m
- From
- 88.7 m
- To
- 90.6 m
- Hole Depth
- 192 m
- Intercept Depth
- 88.7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-41:88.7-90.6
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513449
- Northing
- 5515119
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a very narrow width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.03”
Context: 1.90
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-42Cooke Zone · goldGrade: 3.07Grade Unit: g/tIntercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-42
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.07
- Grade Unit
- g/t
- Intercept
- 4.2 m
- From
- 41.5 m
- To
- 45.7 m
- Hole Depth
- 177 m
- Intercept Depth
- 41.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-42:41.5-45.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513295
- Northing
- 5515227
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Strong gold grade over a narrow width, indicating significant mineralization in the North Zone.
Positive factors
- Strong gold grade
Negative factors
- True width unknown
Evidence · table
“3.07”
Context: 4.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-42Cooke Zone · silverGrade: 9.38Grade Unit: g/tIntercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-42
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 9.38
- Grade Unit
- g/t
- Intercept
- 4.2 m
- From
- 41.5 m
- To
- 45.7 m
- Hole Depth
- 177 m
- Intercept Depth
- 41.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-42:41.5-45.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513295
- Northing
- 5515227
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“9.38”
Context: 4.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-42Cooke Zone · copperGrade: 0.69Grade Unit: %Intercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-42
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.69
- Grade Unit
- %
- Intercept
- 4.2 m
- From
- 41.5 m
- To
- 45.7 m
- Hole Depth
- 177 m
- Intercept Depth
- 41.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-42:41.5-45.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513295
- Northing
- 5515227
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate copper grade over a narrow width, contributing positively to the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.69”
Context: 4.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-42Cooke Zone · goldGrade: 0.94Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- COR-25-42
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.94
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 131.1 m
- To
- 138.8 m
- Hole Depth
- 177 m
- Intercept Depth
- 131.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-42:131.1-138.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513295
- Northing
- 5515227
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a moderate width, contributing to the overall understanding of the South Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.94”
Context: 7.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-42Cooke Zone · silverGrade: 2.46Grade Unit: g/tIntercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- COR-25-42
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.46
- Grade Unit
- g/t
- Intercept
- 7.7 m
- From
- 131.1 m
- To
- 138.8 m
- Hole Depth
- 177 m
- Intercept Depth
- 131.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-42:131.1-138.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513295
- Northing
- 5515227
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a moderate width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“2.46”
Context: 7.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-42Cooke Zone · copperGrade: 0.5Grade Unit: %Intercept: 7.7 mView all detailsHide details
Identity
- Hole ID
- COR-25-42
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.5
- Grade Unit
- %
- Intercept
- 7.7 m
- From
- 131.1 m
- To
- 138.8 m
- Hole Depth
- 177 m
- Intercept Depth
- 131.1 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-42:131.1-138.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513295
- Northing
- 5515227
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate copper grade over a moderate width, contributing positively to the South Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.50”
Context: 7.70
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-43Cooke Zone · goldGrade: 0.14Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- COR-25-43
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 95.3 m
- To
- 96.9 m
- Hole Depth
- 336 m
- Intercept Depth
- 95.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-43:95.3-96.9
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513471
- Northing
- 5515161
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a very narrow width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.14”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-43Cooke Zone · silverGrade: 2.65Grade Unit: g/tIntercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- COR-25-43
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.65
- Grade Unit
- g/t
- Intercept
- 1.6 m
- From
- 95.3 m
- To
- 96.9 m
- Hole Depth
- 336 m
- Intercept Depth
- 95.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-43:95.3-96.9
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513471
- Northing
- 5515161
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a very narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“2.65”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-43Cooke Zone · copperGrade: 0.4Grade Unit: %Intercept: 1.6 mView all detailsHide details
Identity
- Hole ID
- COR-25-43
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.4
- Grade Unit
- %
- Intercept
- 1.6 m
- From
- 95.3 m
- To
- 96.9 m
- Hole Depth
- 336 m
- Intercept Depth
- 95.3 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-43:95.3-96.9
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513471
- Northing
- 5515161
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a very narrow width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.40”
Context: 1.60
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-43Cooke Zone · goldGrade: 0.11Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-43
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.11
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 194.6 m
- To
- 203.8 m
- Hole Depth
- 336 m
- Intercept Depth
- 194.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-43:194.6-203.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513471
- Northing
- 5515161
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low gold grade over a wide width, indicating sub-economic mineralization.
Negative factors
- True width unknown
Evidence · table
“0.11”
Context: 9.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-43Cooke Zone · silverGrade: 0.9Grade Unit: g/tIntercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-43
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.9
- Grade Unit
- g/t
- Intercept
- 9.2 m
- From
- 194.6 m
- To
- 203.8 m
- Hole Depth
- 336 m
- Intercept Depth
- 194.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-43:194.6-203.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513471
- Northing
- 5515161
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a wide width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“0.90”
Context: 9.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-43Cooke Zone · copperGrade: 0.09Grade Unit: %Intercept: 9.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-43
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.09
- Grade Unit
- %
- Intercept
- 9.2 m
- From
- 194.6 m
- To
- 203.8 m
- Hole Depth
- 336 m
- Intercept Depth
- 194.6 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-43:194.6-203.8
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513471
- Northing
- 5515161
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a wide width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.09”
Context: 9.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-44Cooke Zone · goldGrade: 0.36Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-44
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.36
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 25.4 m
- To
- 29.4 m
- Hole Depth
- 177 m
- Intercept Depth
- 25.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-44:25.4-29.4
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513345
- Northing
- 5515194
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak gold grade over a narrow width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.36”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-44Cooke Zone · silverGrade: 0.38Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-44
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.38
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 25.4 m
- To
- 29.4 m
- Hole Depth
- 177 m
- Intercept Depth
- 25.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-44:25.4-29.4
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513345
- Northing
- 5515194
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low silver grade over a narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“0.38”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-44Cooke Zone · copperGrade: 0.03Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-44
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.03
- Grade Unit
- %
- Intercept
- 4 m
- From
- 25.4 m
- To
- 29.4 m
- Hole Depth
- 177 m
- Intercept Depth
- 25.4 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-44:25.4-29.4
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513345
- Northing
- 5515194
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Very low copper grade over a narrow width, below typical economic thresholds for open pit.
Negative factors
- True width unknown
Evidence · table
“0.03”
Context: 4.00
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-44Cooke Zone · goldGrade: 0.61Grade Unit: g/tIntercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-44
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.61
- Grade Unit
- g/t
- Intercept
- 16.4 m
- From
- 120.5 m
- To
- 136.9 m
- Hole Depth
- 177 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-44:120.5-136.9
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513345
- Northing
- 5515194
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a significant width, contributing positively to the South Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.61”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-44Cooke Zone · silverGrade: 2.32Grade Unit: g/tIntercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-44
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.32
- Grade Unit
- g/t
- Intercept
- 16.4 m
- From
- 120.5 m
- To
- 136.9 m
- Hole Depth
- 177 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-44:120.5-136.9
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513345
- Northing
- 5515194
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a significant width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“2.32”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-44Cooke Zone · copperGrade: 0.36Grade Unit: %Intercept: 16.4 mView all detailsHide details
Identity
- Hole ID
- COR-25-44
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.36
- Grade Unit
- %
- Intercept
- 16.4 m
- From
- 120.5 m
- To
- 136.9 m
- Hole Depth
- 177 m
- Intercept Depth
- 120.5 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-44:120.5-136.9
- Mining Method
- open_pit
Location
- Location
- South Zone
- Easting
- 513345
- Northing
- 5515194
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak copper grade over a significant width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.36”
Context: 16.40
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-45Cooke Zone · goldGrade: 1.29Grade Unit: g/tIntercept: 13.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-45
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.29
- Grade Unit
- g/t
- Intercept
- 13.2 m
- From
- 194.8 m
- To
- 208 m
- Hole Depth
- 378 m
- Intercept Depth
- 194.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-45:194.8-208
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513568
- Northing
- 5515173
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate gold grade over a significant width, contributing positively to the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“1.29”
Context: 13.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-45Cooke Zone · silverGrade: 5.11Grade Unit: g/tIntercept: 13.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-45
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 5.11
- Grade Unit
- g/t
- Intercept
- 13.2 m
- From
- 194.8 m
- To
- 208 m
- Hole Depth
- 378 m
- Intercept Depth
- 194.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-45:194.8-208
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513568
- Northing
- 5515173
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a significant width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“5.11”
Context: 13.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-45Cooke Zone · copperGrade: 0.87Grade Unit: %Intercept: 13.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-45
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.87
- Grade Unit
- %
- Intercept
- 13.2 m
- From
- 194.8 m
- To
- 208 m
- Hole Depth
- 378 m
- Intercept Depth
- 194.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-45:194.8-208
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513568
- Northing
- 5515173
- Elevation
- 392 m
- Azimuth
- 210 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Moderate copper grade over a significant width, contributing positively to the North Zone mineralization.
Negative factors
- True width unknown
Evidence · table
“0.87”
Context: 13.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-46Cooke Zone · goldGrade: 0.39Grade Unit: g/tIntercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-46
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.39
- Grade Unit
- g/t
- Intercept
- 4.2 m
- From
- 94.8 m
- To
- 99 m
- Hole Depth
- 261 m
- Intercept Depth
- 94.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-46:94.8-99
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513400
- Northing
- 5515212
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Weak gold grade over a narrow width, slightly above the weak threshold for open pit.
Negative factors
- True width unknown
Evidence · table
“0.39”
Context: 4.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-46Cooke Zone · silverGrade: 15.59Grade Unit: g/tIntercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-46
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 15.59
- Grade Unit
- g/t
- Intercept
- 4.2 m
- From
- 94.8 m
- To
- 99 m
- Hole Depth
- 261 m
- Intercept Depth
- 94.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-46:94.8-99
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513400
- Northing
- 5515212
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Low silver grade over a narrow width, below typical economic thresholds.
Negative factors
- True width unknown
Evidence · table
“15.59”
Context: 4.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-46Cooke Zone · copperGrade: 1.32Grade Unit: %Intercept: 4.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-46
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.32
- Grade Unit
- %
- Intercept
- 4.2 m
- From
- 94.8 m
- To
- 99 m
- Hole Depth
- 261 m
- Intercept Depth
- 94.8 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-25-46:94.8-99
- Mining Method
- open_pit
Location
- Location
- North Zone
- Easting
- 513400
- Northing
- 5515212
- Elevation
- 391 m
- Azimuth
- 210 °
- Dip
- -48 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Strong copper grade over a narrow width, indicating significant mineralization in the North Zone.
Negative factors
- True width unknown
Evidence · table
“1.32”
Context: 4.20
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-25-46Cooke Zone · goldGrade: 0.07Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- COR-25-46
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 197 m
- To
- 200.3 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-46:197-200.3
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.07 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.07 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.07”
Context: COR-25-46
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-46Cooke Zone · silverGrade: 1.34Grade Unit: g/tIntercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- COR-25-46
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.34
- Grade Unit
- g/t
- Intercept
- 3.3 m
- From
- 197 m
- To
- 200.3 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-46:197-200.3
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.34 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.4 g/t·m is below.
Negative factors
- 1.34 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.34”
Context: COR-25-46
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-46Cooke Zone · copperGrade: 0.52Grade Unit: %Intercept: 3.3 mView all detailsHide details
Identity
- Hole ID
- COR-25-46
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.52
- Grade Unit
- %
- Intercept
- 3.3 m
- From
- 197 m
- To
- 200.3 m
- Intercept Depth
- 197 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-46:197-200.3
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.52 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.7 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.52”
Context: COR-25-46
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-47Cooke Zone · goldGrade: 0.09Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-47
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 89.4 m
- To
- 94.4 m
- Intercept Depth
- 89.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-47:89.4-94.4
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below.
Negative factors
- 0.09 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: COR-25-47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-47Cooke Zone · silverGrade: 1.76Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-47
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.76
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 89.4 m
- To
- 94.4 m
- Intercept Depth
- 89.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-47:89.4-94.4
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.76 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 8.8 g/t·m is below.
Negative factors
- 1.76 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.76”
Context: COR-25-47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-47Cooke Zone · copperGrade: 0.31Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-25-47
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.31
- Grade Unit
- %
- Intercept
- 5 m
- From
- 89.4 m
- To
- 94.4 m
- Intercept Depth
- 89.4 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-47:89.4-94.4
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.31 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.6 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.31”
Context: COR-25-47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-47Cooke Zone · goldGrade: 0.45Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-47
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.45
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 196 m
- To
- 199 m
- Intercept Depth
- 196 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-47:196-199
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.45 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 1.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.45”
Context: COR-25-47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-47Cooke Zone · silverGrade: 0.2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-47
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 196 m
- To
- 199 m
- Intercept Depth
- 196 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-47:196-199
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.6 g/t·m is below.
Negative factors
- 0.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.20”
Context: COR-25-47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-47Cooke Zone · copperGrade: 0.01Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-47
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 3 m
- From
- 196 m
- To
- 199 m
- Intercept Depth
- 196 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-47:196-199
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: COR-25-47
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-48Cooke Zone · goldGrade: 0.49Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-48
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.49
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 91.7 m
- To
- 95.7 m
- Intercept Depth
- 91.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-48:91.7-95.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.49 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 2.0 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.49”
Context: COR-25-48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-48Cooke Zone · silverGrade: 0.18Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-48
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.18
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 91.7 m
- To
- 95.7 m
- Intercept Depth
- 91.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-48:91.7-95.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.18 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 0.7 g/t·m is below.
Negative factors
- 0.18 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.18”
Context: COR-25-48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-48Cooke Zone · copperGrade: 0.01Grade Unit: %Intercept: 4 mView all detailsHide details
Identity
- Hole ID
- COR-25-48
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.01
- Grade Unit
- %
- Intercept
- 4 m
- From
- 91.7 m
- To
- 95.7 m
- Intercept Depth
- 91.7 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-48:91.7-95.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.01 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.0 %·m is below.
Negative factors
- 0.01 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.01”
Context: COR-25-48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-48Cooke Zone · goldGrade: 3.39Grade Unit: g/tIntercept: 13.1 mView all detailsHide details
Identity
- Hole ID
- COR-25-48
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.39
- Grade Unit
- g/t
- Intercept
- 13.1 m
- From
- 139.6 m
- To
- 152.7 m
- Intercept Depth
- 139.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-48:139.6-152.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 3.39 g/t gold is strong against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 44.4 g/t·m is moderate (grade alone is strong; the better of the two is used).
Positive factors
- 3.39 g/t gold is strong on the open_pit mining band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.39”
Context: COR-25-48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-48Cooke Zone · silverGrade: 3.04Grade Unit: g/tIntercept: 13.1 mView all detailsHide details
Identity
- Hole ID
- COR-25-48
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.04
- Grade Unit
- g/t
- Intercept
- 13.1 m
- From
- 139.6 m
- To
- 152.7 m
- Intercept Depth
- 139.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-48:139.6-152.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 3.04 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 39.8 g/t·m is below.
Negative factors
- 3.04 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“3.04”
Context: COR-25-48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-48Cooke Zone · copperGrade: 0.62Grade Unit: %Intercept: 13.1 mView all detailsHide details
Identity
- Hole ID
- COR-25-48
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.62
- Grade Unit
- %
- Intercept
- 13.1 m
- From
- 139.6 m
- To
- 152.7 m
- Intercept Depth
- 139.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-48:139.6-152.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.62 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 8.1 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.62”
Context: COR-25-48
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-49Cooke Zone · goldGrade: 0.37Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- COR-25-49
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.37
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 321 m
- To
- 323.1 m
- Intercept Depth
- 321 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-49:321-323.1
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.8 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: COR-25-49
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-49Cooke Zone · silverGrade: 28.85Grade Unit: g/tIntercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- COR-25-49
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 28.85
- Grade Unit
- g/t
- Intercept
- 2.1 m
- From
- 321 m
- To
- 323.1 m
- Intercept Depth
- 321 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-49:321-323.1
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 28.85 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 60.6 g/t·m is below.
Negative factors
- 28.85 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“28.85”
Context: COR-25-49
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-49Cooke Zone · copperGrade: 2.75Grade Unit: %Intercept: 2.1 mView all detailsHide details
Identity
- Hole ID
- COR-25-49
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.75
- Grade Unit
- %
- Intercept
- 2.1 m
- From
- 321 m
- To
- 323.1 m
- Intercept Depth
- 321 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-49:321-323.1
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 2.75 % copper is exceptional against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 5.8 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 2.75 % copper is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.75”
Context: COR-25-49
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-50Cooke Zone · goldGrade: 1.54Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- COR-25-50
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.54
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 109 m
- To
- 111 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-50:109-111
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.54 g/t gold is moderate against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 3.1 g/t·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.54”
Context: COR-25-50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-50Cooke Zone · silverGrade: 4.6Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- COR-25-50
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 4.6
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 109 m
- To
- 111 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-50:109-111
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 4.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 9.2 g/t·m is below.
Negative factors
- 4.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.60”
Context: COR-25-50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-50Cooke Zone · copperGrade: 0.37Grade Unit: %Intercept: 2 mView all detailsHide details
Identity
- Hole ID
- COR-25-50
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.37
- Grade Unit
- %
- Intercept
- 2 m
- From
- 109 m
- To
- 111 m
- Intercept Depth
- 109 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-50:109-111
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.37 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.7 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.37”
Context: COR-25-50
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-22Cooke Zone · goldGrade: 0.31Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-22
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 82.8 m
- To
- 84 m
- Intercept Depth
- 82.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-22:82.8-84
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.31 g/t gold is weak against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.4 g/t·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.31”
Context: COR-25-22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-22Cooke Zone · silverGrade: 27.19Grade Unit: g/tIntercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-22
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 27.19
- Grade Unit
- g/t
- Intercept
- 1.2 m
- From
- 82.8 m
- To
- 84 m
- Intercept Depth
- 82.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-22:82.8-84
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 27.19 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 32.6 g/t·m is below.
Negative factors
- 27.19 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“27.19”
Context: COR-25-22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-22Cooke Zone · copperGrade: 4.14Grade Unit: %Intercept: 1.2 mView all detailsHide details
Identity
- Hole ID
- COR-25-22
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 4.14
- Grade Unit
- %
- Intercept
- 1.2 m
- From
- 82.8 m
- To
- 84 m
- Intercept Depth
- 82.8 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-22:82.8-84
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 4.14 % copper is exceptional against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 5.0 %·m is below (grade alone is exceptional; the better of the two is used).
Positive factors
- 4.14 % copper is exceptional on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“4.14”
Context: COR-25-22
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-23Cooke Zone · goldGrade: 0.06Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-23
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 67.5 m
- To
- 72 m
- Intercept Depth
- 67.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-23:67.5-72
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.06 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.3 g/t·m is below.
Negative factors
- 0.06 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.06”
Context: COR-25-23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-23Cooke Zone · silverGrade: 6.73Grade Unit: g/tIntercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-23
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 6.73
- Grade Unit
- g/t
- Intercept
- 4.5 m
- From
- 67.5 m
- To
- 72 m
- Intercept Depth
- 67.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-23:67.5-72
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 6.73 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 30.3 g/t·m is below.
Negative factors
- 6.73 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.73”
Context: COR-25-23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-23Cooke Zone · copperGrade: 0.67Grade Unit: %Intercept: 4.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-23
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.67
- Grade Unit
- %
- Intercept
- 4.5 m
- From
- 67.5 m
- To
- 72 m
- Intercept Depth
- 67.5 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-23:67.5-72
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.67 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 3.0 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.67”
Context: COR-25-23
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-24Cooke Zone · goldGrade: 0.05Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-24
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.05
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 54 m
- To
- 56.5 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-24:54-56.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.05 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.05 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.05”
Context: COR-25-24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-24Cooke Zone · silverGrade: 10.08Grade Unit: g/tIntercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-24
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 10.08
- Grade Unit
- g/t
- Intercept
- 2.5 m
- From
- 54 m
- To
- 56.5 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-24:54-56.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 10.08 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 25.2 g/t·m is below.
Negative factors
- 10.08 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“10.08”
Context: COR-25-24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-24Cooke Zone · copperGrade: 1.28Grade Unit: %Intercept: 2.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-24
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.28
- Grade Unit
- %
- Intercept
- 2.5 m
- From
- 54 m
- To
- 56.5 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-24:54-56.5
- Mining Method
- open_pit
Location
- Location
- South Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.28 % copper is strong against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 3.2 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 1.28 % copper is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.28”
Context: COR-25-24
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-25Cooke Zone · goldGrade: 0.02Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-25
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.02
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 179.6 m
- To
- 182.6 m
- Intercept Depth
- 179.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-25:179.6-182.6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.02 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.1 g/t·m is below.
Negative factors
- 0.02 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.02”
Context: COR-25-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-25Cooke Zone · silverGrade: 2.2Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-25
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.2
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 179.6 m
- To
- 182.6 m
- Intercept Depth
- 179.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-25:179.6-182.6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 2.2 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 6.6 g/t·m is below.
Negative factors
- 2.2 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.20”
Context: COR-25-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-25Cooke Zone · copperGrade: 0.14Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-25-25
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.14
- Grade Unit
- %
- Intercept
- 3 m
- From
- 179.6 m
- To
- 182.6 m
- Intercept Depth
- 179.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-25:179.6-182.6
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.14 % copper is below against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.4 %·m is below.
Negative factors
- 0.14 % copper is below the weak threshold (0.25 %) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.14”
Context: COR-25-25
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-27Cooke Zone · goldGrade: 0.15Grade Unit: g/tIntercept: 3.25 mView all detailsHide details
Identity
- Hole ID
- COR-25-27
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 3.25 m
- From
- 74.6 m
- To
- 77.85 m
- Intercept Depth
- 74.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-27:74.6-77.85
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.15 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.5 g/t·m is below.
Negative factors
- 0.15 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.15”
Context: COR-25-27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-27Cooke Zone · silverGrade: 6.1Grade Unit: g/tIntercept: 3.25 mView all detailsHide details
Identity
- Hole ID
- COR-25-27
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 6.1
- Grade Unit
- g/t
- Intercept
- 3.25 m
- From
- 74.6 m
- To
- 77.85 m
- Intercept Depth
- 74.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-27:74.6-77.85
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 6.1 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 19.8 g/t·m is below.
Negative factors
- 6.1 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“6.10”
Context: COR-25-27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-27Cooke Zone · copperGrade: 0.57Grade Unit: %Intercept: 3.25 mView all detailsHide details
Identity
- Hole ID
- COR-25-27
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.57
- Grade Unit
- %
- Intercept
- 3.25 m
- From
- 74.6 m
- To
- 77.85 m
- Intercept Depth
- 74.6 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-27:74.6-77.85
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.57 % copper is moderate against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.9 %·m is below (grade alone is moderate; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.57”
Context: COR-25-27
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-29Cooke Zone · goldGrade: 0.09Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-29
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.09
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 131.55 m
- To
- 132.05 m
- Intercept Depth
- 131.55 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-29:131.55-132.05
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.09 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.0 g/t·m is below.
Negative factors
- 0.09 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.09”
Context: COR-25-29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-29Cooke Zone · silverGrade: 9.6Grade Unit: g/tIntercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-29
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 9.6
- Grade Unit
- g/t
- Intercept
- 0.5 m
- From
- 131.55 m
- To
- 132.05 m
- Intercept Depth
- 131.55 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-29:131.55-132.05
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 9.6 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 4.8 g/t·m is below.
Negative factors
- 9.6 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“9.60”
Context: COR-25-29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-29Cooke Zone · copperGrade: 1.24Grade Unit: %Intercept: 0.5 mView all detailsHide details
Identity
- Hole ID
- COR-25-29
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.24
- Grade Unit
- %
- Intercept
- 0.5 m
- From
- 131.55 m
- To
- 132.05 m
- Intercept Depth
- 131.55 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-29:131.55-132.05
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 1.24 % copper is strong against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 0.6 %·m is below (grade alone is strong; the better of the two is used).
Positive factors
- 1.24 % copper is strong on the default band.
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“1.24”
Context: COR-25-29
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-30Cooke Zone · goldGrade: 0.04Grade Unit: g/tIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- COR-25-30
- Project
- Cooke Zone
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.04
- Grade Unit
- g/t
- Intercept
- 4.55 m
- From
- 74.15 m
- To
- 78.7 m
- Intercept Depth
- 74.15 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-30:74.15-78.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.04 g/t gold is below against the open_pit mining band [5, 2, 1, 0.3] g/t. Grade×width 0.2 g/t·m is below.
Negative factors
- 0.04 g/t gold is below the weak threshold (0.3 g/t) on the open_pit mining band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.04”
Context: COR-25-30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-30Cooke Zone · silverGrade: 2.78Grade Unit: g/tIntercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- COR-25-30
- Project
- Cooke Zone
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.78
- Grade Unit
- g/t
- Intercept
- 4.55 m
- From
- 74.15 m
- To
- 78.7 m
- Intercept Depth
- 74.15 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-30:74.15-78.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 2.78 g/t silver is below against the default band [500, 200, 100, 30] g/t. Grade×width 12.6 g/t·m is below.
Negative factors
- 2.78 g/t silver is below the weak threshold (30 g/t) on the default band.
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“2.78”
Context: COR-25-30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
COR-25-30Cooke Zone · copperGrade: 0.25Grade Unit: %Intercept: 4.55 mView all detailsHide details
Identity
- Hole ID
- COR-25-30
- Project
- Cooke Zone
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.25
- Grade Unit
- %
- Intercept
- 4.55 m
- From
- 74.15 m
- To
- 78.7 m
- Intercept Depth
- 74.15 m
Classification
- Deposit Type
- orogenic
- Sample Type
- drill
- Group ID
- COR-25-30:74.15-78.7
- Mining Method
- open_pit
Location
- Location
- North Zone
- Loc. Source
- document
QA/QC
- Laboratory
- Agat laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-02-27T00:00:00.000Z
Reasoning: Expanded from assay table. 0.25 % copper is weak against the default band [2.5, 1, 0.5, 0.25] %. Grade×width 1.1 %·m is below (grade alone is weak; the better of the two is used).
Negative factors
- Scored from rubric bands during table expansion, not from document context.
Evidence · table
“0.25”
Context: COR-25-30
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.