XXIX Intersects 32.7 g/t Gold, 81.4 g/t Silver and .95% Copper over 7.5 Metres at Cooke
Original announcement by tmx on
- Company
- XXIX Metal Corp.
- Ticker
- XXIX
- Exchange
- TSX
- Region
- Quebec
- Primary commodity
- Gold
- Secondary commodities
- Silver, Copper
- Document categories
- Drill results
- Extracted
- 2026-09-17 06:51:09 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
XXIX Metal Corp. reported high-grade drill results from its Cooke Zone, part of the Opémiska project, including 32.7 g/t gold, 81.4 g/t silver, and 0.95% copper over 7.5 metres in hole COR-26-60. These results, significantly exceeding prior project averages, support the potential for Cooke to become a satellite open pit and contribute to a maiden resource estimate. The company has completed 18 holes in its winter drill program, with assays pending for 8 additional holes.
Reasoning: The document reports exceptional gold, silver, and strong copper grades from the Cooke Zone, including a headline intercept of 32.7 g/t gold, 81.4 g/t silver, and 0.95% copper over 7.5 metres. These results are significantly higher than the project's prior average grades for both gold and copper, indicating strong potential for resource growth and de-risking. The program aims to define a maiden resource, adding high novelty. However, the lack of true width disclosure and explicit lab accreditation reduces confidence slightly.
Positive factors
- Exceptional high-grade gold and silver intercepts, significantly exceeding prior averages for the project.
- Strong copper grades, also above prior averages.
- Multiple high-grade intervals reported, indicating continuity.
- Drilling supports potential for a maiden resource at the Cooke Zone, near existing infrastructure.
Negative factors
- True width of mineralization is unknown, potentially overstating apparent widths.
- QA/QC disclosure does not explicitly state lab accreditation (e.g., ISO 17025).
Low confidence — this extraction should be reviewed alongside the original source.
Facts used in scoring: 54
Extracted facts
Stored fact records: 54. Some facts used in scoring do not have a stored record.
Drill Results (54)
COR-26-51Opemiska · goldGrade: 0.06Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-26-51
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.06
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 130 m
- To
- 137 m
- Hole Depth
- 210 m
- Intercept Depth
- 130 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-51:130-137
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512898
- Northing
- 5515468
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade, falling into the weak category for open-pit gold, and is below the project's average. While it contributes to defining mineralization, its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low gold grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.06”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-51Opemiska · silverGrade: 5.73Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-26-51
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 5.73
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 130 m
- To
- 137 m
- Hole Depth
- 210 m
- Intercept Depth
- 130 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-51:130-137
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512898
- Northing
- 5515468
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, falling into the weak category for open-pit silver. While it contributes to defining mineralization, its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“5.73”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-51Opemiska · copperGrade: 0.54Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-26-51
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.54
- Grade Unit
- %
- Intercept
- 7 m
- From
- 130 m
- To
- 137 m
- Hole Depth
- 210 m
- Intercept Depth
- 130 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-51:130-137
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512898
- Northing
- 5515468
- Elevation
- 393 m
- Azimuth
- 210 °
- Dip
- -55 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a moderate copper grade, exceeding the project's prior average of 0.66% Cu. It contributes positively to defining mineralization and potential for by-product credits.
Positive factors
- Moderate copper grade, above the project's prior average.
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“0.54”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-53Opemiska · goldGrade: 0.07Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-26-53
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.07
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 96 m
- To
- 101 m
- Hole Depth
- 168 m
- Intercept Depth
- 96 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-53:96-101
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512867
- Northing
- 5515325
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade, falling into the weak category for open-pit gold, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low gold grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.07”
Context: 5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-53Opemiska · silverGrade: 11.3Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-26-53
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 11.3
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 96 m
- To
- 101 m
- Hole Depth
- 168 m
- Intercept Depth
- 96 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-53:96-101
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512867
- Northing
- 5515325
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“11.30”
Context: 5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-53Opemiska · copperGrade: 1.63Grade Unit: %Intercept: 5 mView all detailsHide details
Identity
- Hole ID
- COR-26-53
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.63
- Grade Unit
- %
- Intercept
- 5 m
- From
- 96 m
- To
- 101 m
- Hole Depth
- 168 m
- Intercept Depth
- 96 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-53:96-101
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512867
- Northing
- 5515325
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.63% over 5 metres, well above the project's prior average of 0.66% Cu. This is a positive result for potential by-product credits and overall project economics.
Positive factors
- Strong copper grade, significantly above the project's prior average.
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“1.63”
Context: 5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-55Opemiska · goldGrade: 0.26Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-26-55
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.26
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 153 m
- To
- 156 m
- Hole Depth
- 231 m
- Intercept Depth
- 153 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-55:153-156
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512985
- Northing
- 5515253
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade, falling into the weak category for open-pit gold, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low gold grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.26”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-55Opemiska · silverGrade: 2.7Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-26-55
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.7
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 153 m
- To
- 156 m
- Hole Depth
- 231 m
- Intercept Depth
- 153 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-55:153-156
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512985
- Northing
- 5515253
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“2.70”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-55Opemiska · copperGrade: 0.24Grade Unit: %Intercept: 3 mView all detailsHide details
Identity
- Hole ID
- COR-26-55
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.24
- Grade Unit
- %
- Intercept
- 3 m
- From
- 153 m
- To
- 156 m
- Hole Depth
- 231 m
- Intercept Depth
- 153 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-55:153-156
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 512985
- Northing
- 5515253
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -50 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a low copper grade, falling into the weak category for open-pit copper, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low copper grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.24”
Context: 3
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-56Opemiska · goldGrade: 0.25Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- COR-26-56
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 51.7 m
- To
- 54.3 m
- Hole Depth
- 168 m
- Intercept Depth
- 51.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-56:51.7-54.3
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513031
- Northing
- 5515228
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade, falling into the weak category for open-pit gold, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low gold grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.25”
Context: 2.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-56Opemiska · silverGrade: 0.54Grade Unit: g/tIntercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- COR-26-56
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.54
- Grade Unit
- g/t
- Intercept
- 2.6 m
- From
- 51.7 m
- To
- 54.3 m
- Hole Depth
- 168 m
- Intercept Depth
- 51.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-56:51.7-54.3
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513031
- Northing
- 5515228
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.54”
Context: 2.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-56Opemiska · copperGrade: 0.07Grade Unit: %Intercept: 2.6 mView all detailsHide details
Identity
- Hole ID
- COR-26-56
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.07
- Grade Unit
- %
- Intercept
- 2.6 m
- From
- 51.7 m
- To
- 54.3 m
- Hole Depth
- 168 m
- Intercept Depth
- 51.7 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-56:51.7-54.3
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513031
- Northing
- 5515228
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -45 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, falling into the weak category for open-pit copper, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low copper grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.07”
Context: 2.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-57Opemiska · goldGrade: 5.57Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- COR-26-57
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 5.57
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 54.3 m
- To
- 57 m
- Hole Depth
- 180 m
- Intercept Depth
- 54.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-57:54.3-57
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513077
- Northing
- 5515219
- Elevation
- 392 m
- Azimuth
- 30 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows an exceptional gold grade of 5.57 g/t over 2.7 metres, significantly exceeding the project's prior average of 5.04 g/t Au. This is a strong positive result.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“5.57”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-57Opemiska · silverGrade: 21.89Grade Unit: g/tIntercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- COR-26-57
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 21.89
- Grade Unit
- g/t
- Intercept
- 2.7 m
- From
- 54.3 m
- To
- 57 m
- Hole Depth
- 180 m
- Intercept Depth
- 54.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-57:54.3-57
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513077
- Northing
- 5515219
- Elevation
- 392 m
- Azimuth
- 30 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a low silver grade, falling into the weak category for open-pit silver. While it contributes to defining mineralization, its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“21.89”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-57Opemiska · copperGrade: 1.18Grade Unit: %Intercept: 2.7 mView all detailsHide details
Identity
- Hole ID
- COR-26-57
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.18
- Grade Unit
- %
- Intercept
- 2.7 m
- From
- 54.3 m
- To
- 57 m
- Hole Depth
- 180 m
- Intercept Depth
- 54.3 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-57:54.3-57
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513077
- Northing
- 5515219
- Elevation
- 392 m
- Azimuth
- 30 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a strong copper grade of 1.18% over 2.7 metres, well above the project's prior average of 0.66% Cu. This is a positive result for potential by-product credits and overall project economics.
Positive factors
- Strong copper grade, significantly above the project's prior average.
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“1.18”
Context: 2.7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-58Opemiska · goldGrade: 0.17Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-26-58
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 191 m
- To
- 198 m
- Hole Depth
- 210 m
- Intercept Depth
- 191 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-58:191-198
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513132
- Northing
- 5515190
- Elevation
- 392 m
- Azimuth
- 30 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low gold grade, falling into the weak category for open-pit gold, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low gold grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.17”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-58Opemiska · silverGrade: 0.44Grade Unit: g/tIntercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-26-58
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.44
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 191 m
- To
- 198 m
- Hole Depth
- 210 m
- Intercept Depth
- 191 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-58:191-198
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513132
- Northing
- 5515190
- Elevation
- 392 m
- Azimuth
- 30 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.44”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-58Opemiska · copperGrade: 0.04Grade Unit: %Intercept: 7 mView all detailsHide details
Identity
- Hole ID
- COR-26-58
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.04
- Grade Unit
- %
- Intercept
- 7 m
- From
- 191 m
- To
- 198 m
- Hole Depth
- 210 m
- Intercept Depth
- 191 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-58:191-198
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513132
- Northing
- 5515190
- Elevation
- 392 m
- Azimuth
- 30 °
- Dip
- -47 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, falling into the weak category for open-pit copper, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low copper grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.04”
Context: 7
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 2.25Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2.25
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 192 m
- To
- 209 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:192-209
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a strong gold grade of 2.25 g/t over 17 metres, exceeding the project's prior average of 5.04 g/t Au. The significant width adds to its materiality.
Positive factors
- Strong gold grade over a significant width, exceeding the project's prior average.
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“2.25”
Context: 17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 0.91Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.91
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 192 m
- To
- 209 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:192-209
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.91”
Context: 17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.11Grade Unit: %Intercept: 17 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.11
- Grade Unit
- %
- Intercept
- 17 m
- From
- 192 m
- To
- 209 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:192-209
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This intercept shows a very low copper grade, falling into the weak category for open-pit copper, and is below the project's average. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low copper grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“0.11”
Context: 17
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 26.6Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 26.6
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 198 m
- To
- 199 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:198-199
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 26.6 g/t over 1 metre, significantly exceeding the project's prior average. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“26.6”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 9.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 9.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 198 m
- To
- 199 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:198-199
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“9.2”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.94Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.94
- Grade Unit
- %
- Intercept
- 1 m
- From
- 198 m
- To
- 199 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:198-199
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional copper grade of 0.94% over 1 metre, significantly exceeding the project's prior average of 0.66% Cu. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional copper grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“0.94”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 3.37Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.37
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 206 m
- To
- 207 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:206-207
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 3.37 g/t over 1 metre, significantly exceeding the project's prior average of 5.04 g/t Au. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“3.37”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 1.7Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.7
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 206 m
- To
- 207 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:206-207
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“1.7”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.28Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.28
- Grade Unit
- %
- Intercept
- 1 m
- From
- 206 m
- To
- 207 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:206-207
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a moderate copper grade of 0.28% over 1 metre, exceeding the project's prior average of 0.66% Cu. It contributes to defining mineralization.
Positive factors
- Moderate copper grade, above the project's prior average.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“0.28”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 3.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 3.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:207-208
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 3.5 g/t over 1 metre, significantly exceeding the project's prior average of 5.04 g/t Au. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“3.5”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 1.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:207-208
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“1.9”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.34Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.34
- Grade Unit
- %
- Intercept
- 1 m
- From
- 207 m
- To
- 208 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:207-208
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a moderate copper grade of 0.34% over 1 metre, exceeding the project's prior average of 0.66% Cu. It contributes to defining mineralization.
Positive factors
- Moderate copper grade, above the project's prior average.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“0.34”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 208 m
- To
- 209 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:208-209
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a strong gold grade of 2 g/t over 1 metre, exceeding the project's prior average of 5.04 g/t Au. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Strong gold grade, exceeding the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“2”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 1Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 208 m
- To
- 209 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:208-209
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Very low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“1”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.18Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.18
- Grade Unit
- %
- Intercept
- 1 m
- From
- 208 m
- To
- 209 m
- Hole Depth
- 270 m
- Intercept Depth
- 192 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:208-209
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a moderate copper grade of 0.18% over 1 metre, exceeding the project's prior average of 0.66% Cu. It contributes to defining mineralization.
Positive factors
- Moderate copper grade, above the project's prior average.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“0.18”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 32.72Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 32.72
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 243 m
- To
- 250.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:243-250.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This headline intercept shows an exceptional gold grade of 32.72 g/t over 7.5 metres, significantly exceeding the project's prior average of 5.04 g/t Au. This is a highly material and novel result, indicating strong potential for the Cooke Zone.
Positive factors
- Exceptional gold grade over a significant width, significantly exceeding the project's prior average.
- Contributes to defining high-grade zones and supports potential for a maiden resource.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“32.72”
Context: 7.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 81.41Grade Unit: g/tIntercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 81.41
- Grade Unit
- g/t
- Intercept
- 7.5 m
- From
- 243 m
- To
- 250.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:243-250.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This headline intercept shows a strong silver grade of 81.41 g/t over 7.5 metres, which is a positive result for potential by-product credits.
Positive factors
- Strong silver grade over a significant width.
- Contributes to defining high-grade zones and supports potential for by-product credits.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“81.41”
Context: 7.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.95Grade Unit: %Intercept: 7.5 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.95
- Grade Unit
- %
- Intercept
- 7.5 m
- From
- 243 m
- To
- 250.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:243-250.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This headline intercept shows an exceptional copper grade of 0.95% over 7.5 metres, significantly exceeding the project's prior average of 0.66% Cu. This is a strong positive result for potential by-product credits and overall project economics.
Positive factors
- Exceptional copper grade over a significant width, significantly above the project's prior average.
- Contributes to defining high-grade zones and supports potential for by-product credits.
Negative factors
- Apparent width only, true width unknown.
Evidence · table
“0.95”
Context: 7.5
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 21.9Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 21.9
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 243 m
- To
- 244 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:243-244
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 21.9 g/t over 1 metre, significantly exceeding the project's prior average. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“21.9”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 35.5Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 35.5
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 243 m
- To
- 244 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:243-244
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade of 35.5 g/t over 1 metre, exceeding the weak threshold. It contributes to defining mineralization.
Positive factors
- Moderate silver grade, above the weak threshold.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“35.5”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 1.99Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.99
- Grade Unit
- %
- Intercept
- 1 m
- From
- 243 m
- To
- 244 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:243-244
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional copper grade of 1.99% over 1 metre, significantly exceeding the project's prior average of 0.66% Cu. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional copper grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“1.99”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 43.2Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 43.2
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 244 m
- To
- 245 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:244-245
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 43.2 g/t over 1 metre, significantly exceeding the project's prior average. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“43.2”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 35.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 35.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 244 m
- To
- 245 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:244-245
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade of 35.8 g/t over 1 metre, exceeding the weak threshold. It contributes to defining mineralization.
Positive factors
- Moderate silver grade, above the weak threshold.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“35.8”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 1.3Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.3
- Grade Unit
- %
- Intercept
- 1 m
- From
- 244 m
- To
- 245 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:244-245
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional copper grade of 1.3% over 1 metre, significantly exceeding the project's prior average of 0.66% Cu. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional copper grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“1.30”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 6.82Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 6.82
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 245 m
- To
- 246 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:245-246
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 6.82 g/t over 1 metre, significantly exceeding the project's prior average. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“6.82”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 450Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 450
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 245 m
- To
- 246 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:245-246
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a strong silver grade of 450 g/t over 1 metre, approaching the exceptional threshold. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Strong silver grade, approaching the exceptional threshold.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“450”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 1.49Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 1.49
- Grade Unit
- %
- Intercept
- 1 m
- From
- 245 m
- To
- 246 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:245-246
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional copper grade of 1.49% over 1 metre, significantly exceeding the project's prior average of 0.66% Cu. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional copper grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“1.49”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 21.2Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 21.2
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 246 m
- To
- 246.6 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:246-246.6
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 21.2 g/t over 0.6 metres, significantly exceeding the project's prior average. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“21.2”
Context: 0.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 16.8Grade Unit: g/tIntercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 16.8
- Grade Unit
- g/t
- Intercept
- 0.6 m
- From
- 246 m
- To
- 246.6 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:246-246.6
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“16.8”
Context: 0.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.27Grade Unit: %Intercept: 0.6 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.27
- Grade Unit
- %
- Intercept
- 0.6 m
- From
- 246 m
- To
- 246.6 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:246-246.6
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a moderate copper grade of 0.27% over 0.6 metres, exceeding the project's prior average of 0.66% Cu. It contributes to defining mineralization.
Positive factors
- Moderate copper grade, above the project's prior average.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“0.27”
Context: 0.6
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 142.4Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 142.4
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 246.6 m
- To
- 247.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:246.6-247.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 142.4 g/t over 0.9 metres, representing a bonanza intercept and significantly exceeding the project's prior average. This is a highly material and novel result.
Positive factors
- Exceptional gold grade, significantly above the project's prior average and a bonanza intercept.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“142.4”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 64.8Grade Unit: g/tIntercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 64.8
- Grade Unit
- g/t
- Intercept
- 0.9 m
- From
- 246.6 m
- To
- 247.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:246.6-247.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a moderate silver grade of 64.8 g/t over 0.9 metres, exceeding the weak threshold. It contributes to defining mineralization.
Positive factors
- Moderate silver grade, above the weak threshold.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“64.8”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.69Grade Unit: %Intercept: 0.9 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.69
- Grade Unit
- %
- Intercept
- 0.9 m
- From
- 246.6 m
- To
- 247.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:246.6-247.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade of 0.69% over 0.9 metres, exceeding the project's prior average of 0.66% Cu. It contributes to defining mineralization.
Positive factors
- Strong copper grade, above the project's prior average.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“0.69”
Context: 0.9
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · goldGrade: 31.8Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- gold
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 31.8
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 247.5 m
- To
- 248.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:247.5-248.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows an exceptional gold grade of 31.8 g/t over 1 metre, significantly exceeding the project's prior average. This high-grade component enhances the overall value of the broader intercept.
Positive factors
- Exceptional gold grade, significantly above the project's prior average.
- Contributes to defining high-grade zones within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“31.8”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · silverGrade: 19.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- silver
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 19.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 247.5 m
- To
- 248.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:247.5-248.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a very low silver grade, falling into the weak category for open-pit silver. Its economic significance is limited.
Positive factors
- Supports continuity of mineralization within the Cooke Zone.
Negative factors
- Low silver grade, below typical economic thresholds for open pit mining.
- Apparent width only, true width unknown.
Evidence · table
“19.4”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
COR-26-60Opemiska · copperGrade: 0.68Grade Unit: %Intercept: 1 mView all detailsHide details
Identity
- Hole ID
- COR-26-60
- Project
- Opemiska
- Commodity
- copper
- Region
- canada_qc
- Reported Region
- canada_qc
- Ticker
- XXIX
Geometry
- Grade
- 0.68
- Grade Unit
- %
- Intercept
- 1 m
- From
- 247.5 m
- To
- 248.5 m
- Hole Depth
- 270 m
- Intercept Depth
- 243 m
Classification
- Program
- mixed
- Sample Type
- drill
- Group ID
- COR-26-60:247.5-248.5
- Mining Method
- open_pit
Location
- Location
- Cooke Zone
- Easting
- 513500
- Northing
- 5514922
- Elevation
- 391 m
- Azimuth
- 30 °
- Dip
- -46 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- Agat Laboratories
- QA/QC Disclosed
- Yes
- QP Signed
- Yes
- QA/QC Methods
- standards, blanks
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-27T00:00:00.000Z
Reasoning: This sub-interval shows a strong copper grade of 0.68% over 1 metre, exceeding the project's prior average of 0.66% Cu. It contributes to defining mineralization.
Positive factors
- Strong copper grade, above the project's prior average.
- Contributes to defining mineralization within the Cooke Zone.
Negative factors
- Narrow intercept length.
- Apparent width only, true width unknown.
Evidence · table
“0.68”
Context: 1
Tags used in scoring
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: qaqc_disclosed is true
Cut-off Undisclosednegative
High-grade interval reported without stating the cut-off grade used for compositing.
Why it applies: no cutoff_grade was stated
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.