Zodiac Gold Expands District-Scale Gold System at Ben Ben with Trench Result of 56m at 0.40 g/t Au and Multiple Mineralized Trends
Original announcement by tmx on
- Company
- Zodiac Gold Inc.
- Ticker
- ZAU
- Exchange
- TSX
- Region
- Liberia
- Primary commodity
- Gold
- Secondary commodities
- None reported
- Document categories
- Drill results
- Extracted
- 2026-09-17 06:52:51 UTC
Analysis by Minestarters Atlas
Minestarters Atlas analysis
Summary
Zodiac Gold announced additional trenching results from its Todi Gold Project in Liberia, highlighted by 56m at 0.40 g/t gold in trench BBT004 at the Ben Ben target. These results confirm broad, continuous, near-surface mineralization and multiple parallel trends, strengthening the geological model for a district-scale, shear-hosted gold system. The company is advancing towards a mineral resource estimate in Q4 2026, with ongoing trenching and drilling programs.
Reasoning: Zodiac Gold reported significant trenching results, including a headline intercept of 56m at 0.40 g/t Au, which expands the known mineralization and confirms multiple trends at its Ben Ben target. The results support a district-scale gold system with both bulk-tonnage and high-grade potential. Strong QA/QC was disclosed, though true widths are not yet determined.
Positive factors
- Headline trench intercept demonstrates broad, continuous, near-surface mineralization with higher-grade zones.
- Confirmation of multiple parallel mineralized trends expands the district-scale potential.
- Robust combination of bulk-tonnage potential and high-grade shoots identified.
- Strong QA/QC procedures and QP sign-off enhance data credibility.
Negative factors
- Intervals are sampled lengths, not true thicknesses, which may overstate true width.
Facts used in scoring: 41
Extracted facts
Stored fact records: 41. Some facts used in scoring do not have a stored record.
Drill Results (41)
BBT001Todi · goldGrade: 0.31Grade Unit: g/tIntercept: 25 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT001
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.31
- Grade Unit
- g/t
- Intercept
- 25 m
- From
- 2 m
- To
- 27 m
- Hole Depth
- 116.3 m
- Intercept Depth
- 2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT001:2-27
- Mining Method
- unknown
Location
- Easting
- 325511
- Northing
- 721959
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 44 m
- Azimuth
- 34 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a historical trench result from 2025, re-reported for context. The grade and width are moderate, but its novelty is low.
Positive factors
- Solid gold grade over a good width for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Apparent width only, true thickness unknown.
Evidence · table
“0.31”
Context: 25.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT001Todi · goldGrade: 3.91Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT001
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 3.91
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 22 m
- To
- 23 m
- Hole Depth
- 116.3 m
- Intercept Depth
- 2 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT001:22-23
- Mining Method
- unknown
Location
- Easting
- 325511
- Northing
- 721959
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 44 m
- Azimuth
- 34 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, high-grade historical intercept, re-reported for context. Its materiality is limited by its width and historical nature.
Positive factors
- High-grade gold intercept for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“3.91”
Context: 1.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT001Todi · goldGrade: 0.13Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- BBT001
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 52 m
- To
- 56 m
- Hole Depth
- 116.3 m
- Intercept Depth
- 52 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT001:52-56
- Mining Method
- unknown
Location
- Easting
- 325511
- Northing
- 721959
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 44 m
- Azimuth
- 34 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff, indicating marginal mineralization. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT001Todi · goldGrade: 0.14Grade Unit: g/tIntercept: 13 mView all detailsHide details
Identity
- Hole ID
- BBT001
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.14
- Grade Unit
- g/t
- Intercept
- 13 m
- From
- 59 m
- To
- 72 m
- Hole Depth
- 116.3 m
- Intercept Depth
- 59 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT001:59-72
- Mining Method
- unknown
Location
- Easting
- 325511
- Northing
- 721959
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 44 m
- Azimuth
- 34 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a moderate width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.14”
Context: 13.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT001Todi · goldGrade: 0.12Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BBT001
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 76 m
- To
- 79 m
- Hole Depth
- 116.3 m
- Intercept Depth
- 76 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT001:76-79
- Mining Method
- unknown
Location
- Easting
- 325511
- Northing
- 721959
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 44 m
- Azimuth
- 34 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.12”
Context: 3.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT002Todi · goldGrade: 0.28Grade Unit: g/tIntercept: 36 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT002
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 36 m
- From
- 0 m
- To
- 36 m
- Hole Depth
- 141.4 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002:0-36
- Mining Method
- unknown
Location
- Easting
- 325726
- Northing
- 722008
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a historical trench result from 2025, re-reported for context. The grade and width are moderate, but its novelty is low.
Positive factors
- Solid gold grade over a good width for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Apparent width only, true thickness unknown.
Evidence · table
“0.28”
Context: 36.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT002Todi · goldGrade: 0.81Grade Unit: g/tIntercept: 2 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT002
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.81
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 28 m
- To
- 30 m
- Hole Depth
- 141.4 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002:28-30
- Mining Method
- unknown
Location
- Easting
- 325726
- Northing
- 722008
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, moderate-grade historical intercept, re-reported for context. Its materiality is limited by its width and historical nature.
Positive factors
- Moderate gold grade for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“0.81”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT002Todi · goldGrade: 1.24Grade Unit: g/tIntercept: 30 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT002
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 1.24
- Grade Unit
- g/t
- Intercept
- 30 m
- From
- 50 m
- To
- 80 m
- Hole Depth
- 141.4 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002:50-80
- Mining Method
- unknown
Location
- Easting
- 325726
- Northing
- 722008
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a significant historical trench result from 2025, re-reported for context. The grade and width are strong, but its novelty is low.
Positive factors
- Strong gold grade over a good width for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Apparent width only, true thickness unknown.
Evidence · table
“1.24”
Context: 30.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT002Todi · goldGrade: 4.75Grade Unit: g/tIntercept: 7 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT002
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 4.75
- Grade Unit
- g/t
- Intercept
- 7 m
- From
- 66 m
- To
- 73 m
- Hole Depth
- 141.4 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002:66-73
- Mining Method
- unknown
Location
- Easting
- 325726
- Northing
- 722008
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is an exceptional-grade historical intercept, re-reported for context. Its materiality is good for a historical result, but novelty is low.
Positive factors
- Exceptional gold grade over a good width for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Apparent width only, true thickness unknown.
Evidence · table
“4.75”
Context: 7.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“4.75”
Context: 7.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT002Todi · goldGrade: 6.61Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT002
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 6.61
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 66 m
- To
- 68 m
- Hole Depth
- 141.4 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002:66-68
- Mining Method
- unknown
Location
- Easting
- 325726
- Northing
- 722008
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a very high-grade historical intercept, re-reported for context. Its materiality is limited by its narrow width and historical nature.
Positive factors
- Exceptional gold grade for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“6.61”
Context: 1.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“6.61”
Context: 1.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT002Todi · goldGrade: 25.1Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT002
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 25.1
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 72 m
- To
- 73 m
- Hole Depth
- 141.4 m
- Intercept Depth
- 50 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002:72-73
- Mining Method
- unknown
Location
- Easting
- 325726
- Northing
- 722008
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is an exceptionally high-grade historical intercept, re-reported for context. Its materiality is limited by its very narrow width and historical nature.
Positive factors
- Exceptional gold grade for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“25.1”
Context: 1.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“25.1”
Context: 1.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT002Todi · goldGrade: 0.13Grade Unit: g/tIntercept: 4 mView all detailsHide details
Identity
- Hole ID
- BBT002
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 4 m
- From
- 90 m
- To
- 94 m
- Hole Depth
- 141.4 m
- Intercept Depth
- 90 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002:90-94
- Mining Method
- unknown
Location
- Easting
- 325726
- Northing
- 722008
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 4.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT002EXTTodi · goldGrade: 0.13Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- BBT002EXT
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 252 m
- To
- 269 m
- Hole Depth
- 283 m
- Intercept Depth
- 252 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002EXT:252-269
- Mining Method
- unknown
Location
- Easting
- 325574
- Northing
- 721765
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 49 m
- Azimuth
- 32 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a moderate width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 17
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT002EXTTodi · goldGrade: 0.12Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- BBT002EXT
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 279 m
- To
- 284 m
- Hole Depth
- 283 m
- Intercept Depth
- 279 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT002EXT:279-284
- Mining Method
- unknown
Location
- Easting
- 325574
- Northing
- 721765
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 49 m
- Azimuth
- 32 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.12”
Context: 5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT003Todi · goldGrade: 0.21Grade Unit: g/tIntercept: 19 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT003
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.21
- Grade Unit
- g/t
- Intercept
- 19 m
- From
- 0 m
- To
- 19 m
- Hole Depth
- 50.3 m
- Intercept Depth
- 0 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT003:0-19
- Mining Method
- unknown
Location
- Easting
- 325833
- Northing
- 721979
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 41 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a historical trench result from 2025, re-reported for context. The grade and width are moderate, but its novelty is low.
Positive factors
- Moderate gold grade over a good width for a historical trench result.
Negative factors
- Result is historical, reducing novelty.
- Apparent width only, true thickness unknown.
Evidence · table
“0.21”
Context: 19.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
Rejected tags
Rejected tags — excluded from scoring because their label or evidence could not be verified.
Stale Data Re-releaseRejected · negative
Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Reason: Historical results re-announced with no new assays or reinterpretation — low genuine novelty.
Evidence · text
“Highlighted results from the 2025 trenching on the southern trend at the Ben Ben target (see news release dated December 1, 2025)”
BBT003Todi · goldGrade: 0.19Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BBT003
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.19
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 27 m
- To
- 29 m
- Hole Depth
- 50.3 m
- Intercept Depth
- 27 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT003:27-29
- Mining Method
- unknown
Location
- Easting
- 325833
- Northing
- 721979
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 41 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.19”
Context: 2.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT003Todi · goldGrade: 0.15Grade Unit: g/tIntercept: 9 mView all detailsHide details
Identity
- Hole ID
- BBT003
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 9 m
- From
- 33 m
- To
- 42 m
- Hole Depth
- 50.3 m
- Intercept Depth
- 33 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT003:33-42
- Mining Method
- unknown
Location
- Easting
- 325833
- Northing
- 721979
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 41 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a moderate width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.15”
Context: 9.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT004Todi · goldGrade: 0.4Grade Unit: g/tIntercept: 56 mView all detailsHide details
Identity
- Hole ID
- BBT004
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.4
- Grade Unit
- g/t
- Intercept
- 56 m
- From
- 7 m
- To
- 63 m
- Hole Depth
- 118.8 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT004:7-63
- Mining Method
- unknown
Location
- Easting
- 326015
- Northing
- 722217
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 45 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is the headline result, showing a significant width of moderate-grade gold, indicative of bulk-tonnage potential. Its location and association with other indicators make it a highly material and novel result.
Positive factors
- Headline intercept with strong width and moderate grade, indicating bulk-tonnage potential.
- Demonstrates broad, continuous, near-surface mineralization.
- Coincident with soil anomaly and artisanal workings, suggesting continuity.
Negative factors
- Apparent width only, true thickness unknown.
Evidence · table
“0.40”
Context: 56
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Step-Out Extensionpositive
Mineralization extended beyond the previously known limit.
Why it applies: Mineralization extended beyond the previously known limit, contributing to district-scale potential.
Evidence · text
“The 56m at 0.40 g/t Au intercept in BBT004 on the northern trend is particularly significant as it demonstrates broad, continuous, near-surface mineralization with higher-grade zones, coincident with a 210m long soil anomaly and adjacent artisanal workings.”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT004Todi · goldGrade: 1.09Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT004
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 1.09
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 32 m
- To
- 33 m
- Hole Depth
- 118.8 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT004:32-33
- Mining Method
- unknown
Location
- Easting
- 326015
- Northing
- 722217
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 45 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, moderate-grade intercept within the headline trench, contributing to the overall grade but not material on its own.
Positive factors
- Moderate gold grade within a broader mineralized zone.
Negative factors
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“1.09”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT004Todi · goldGrade: 1.17Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT004
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 1.17
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 39 m
- To
- 40 m
- Hole Depth
- 118.8 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT004:39-40
- Mining Method
- unknown
Location
- Easting
- 326015
- Northing
- 722217
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 45 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, moderate-grade intercept within the headline trench, contributing to the overall grade but not material on its own.
Positive factors
- Moderate gold grade within a broader mineralized zone.
Negative factors
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“1.17”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT004Todi · goldGrade: 1.21Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT004
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 1.21
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 52 m
- To
- 53 m
- Hole Depth
- 118.8 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT004:52-53
- Mining Method
- unknown
Location
- Easting
- 326015
- Northing
- 722217
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 45 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, moderate-grade intercept within the headline trench, contributing to the overall grade but not material on its own.
Positive factors
- Moderate gold grade within a broader mineralized zone.
Negative factors
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“1.21”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT004Todi · goldGrade: 1.01Grade Unit: g/tIntercept: 1 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT004
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 1.01
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 56 m
- To
- 57 m
- Hole Depth
- 118.8 m
- Intercept Depth
- 7 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT004:56-57
- Mining Method
- unknown
Location
- Easting
- 326015
- Northing
- 722217
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 45 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, moderate-grade intercept within the headline trench, contributing to the overall grade but not material on its own.
Positive factors
- Moderate gold grade within a broader mineralized zone.
Negative factors
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“1.01”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT004Todi · goldGrade: 0.22Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BBT004
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.22
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 67 m
- To
- 70 m
- Hole Depth
- 118.8 m
- Intercept Depth
- 67 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT004:67-70
- Mining Method
- unknown
Location
- Easting
- 326015
- Northing
- 722217
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 45 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.22”
Context: 3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT004Todi · goldGrade: 0.28Grade Unit: g/tIntercept: 12 mHistorical resultNeeds review: historical_restatementView all detailsHide details
Identity
- Hole ID
- BBT004
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.28
- Grade Unit
- g/t
- Intercept
- 12 m
- From
- 73 m
- To
- 85 m
- Hole Depth
- 118.8 m
- Intercept Depth
- 73 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT004:73-85
- Mining Method
- unknown
Location
- Easting
- 326015
- Northing
- 722217
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 66 m
- Azimuth
- 45 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- Yes
- Review Reason
- historical_restatement
- Interp. Status
- scored
- Historical
- Yes
- Historical Source Date
- 2025-12-01T00:00:00.000Z
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a moderate width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.28”
Context: 12
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT005Todi · goldGrade: 0.13Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BBT005
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 83 m
- To
- 85 m
- Hole Depth
- 170 m
- Intercept Depth
- 83 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT005:83-85
- Mining Method
- unknown
Location
- Easting
- 325886
- Northing
- 721838
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT005Todi · goldGrade: 0.56Grade Unit: g/tIntercept: 32 mView all detailsHide details
Identity
- Hole ID
- BBT005
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.56
- Grade Unit
- g/t
- Intercept
- 32 m
- From
- 91 m
- To
- 123 m
- Hole Depth
- 170 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT005:91-123
- Mining Method
- unknown
Location
- Easting
- 325886
- Northing
- 721838
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a strong new intercept with good grade and width, contributing positively to the project's overall potential and expanding the known mineralization.
Positive factors
- Strong gold grade over a significant width, indicating good mineralization.
- Contributes to the overall understanding of the mineralized trends.
Negative factors
- Apparent width only, true thickness unknown.
Evidence · table
“0.56”
Context: 32.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT005Todi · goldGrade: 1.08Grade Unit: g/tIntercept: 14 mView all detailsHide details
Identity
- Hole ID
- BBT005
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 1.08
- Grade Unit
- g/t
- Intercept
- 14 m
- From
- 108 m
- To
- 122 m
- Hole Depth
- 170 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT005:108-122
- Mining Method
- unknown
Location
- Easting
- 325886
- Northing
- 721838
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a strong new intercept with good grade and width, contributing positively to the project's overall potential.
Positive factors
- Strong gold grade over a good width within a broader mineralized zone.
Negative factors
- Apparent width only, true thickness unknown.
Evidence · table
“1.08”
Context: 14.00
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT005Todi · goldGrade: 9.4Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- BBT005
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 9.4
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 111 m
- To
- 112 m
- Hole Depth
- 170 m
- Intercept Depth
- 91 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT005:111-112
- Mining Method
- unknown
Location
- Easting
- 325886
- Northing
- 721838
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a very high-grade intercept within a broader zone, indicating the presence of high-grade shoots. Its materiality is limited by its narrow width.
Positive factors
- Exceptional gold grade within a broader mineralized zone.
Negative factors
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“9.40”
Context: 1.00
Tags used in scoring
Bonanza Interceptpositive
Exceptionally high-grade zone, well above the deposit-type norm.
Why it applies: Exceptionally high-grade zone, well above the deposit-type norm.
Evidence · table
“9.40”
Context: 1.00
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT005Todi · goldGrade: 0.25Grade Unit: g/tIntercept: 13 mView all detailsHide details
Identity
- Hole ID
- BBT005
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.25
- Grade Unit
- g/t
- Intercept
- 13 m
- From
- 149 m
- To
- 162 m
- Hole Depth
- 170 m
- Intercept Depth
- 149 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT005:149-162
- Mining Method
- unknown
Location
- Easting
- 325886
- Northing
- 721838
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a moderate width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.25”
Context: 13
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT005Todi · goldGrade: 0.1Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BBT005
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 167 m
- To
- 170 m
- Hole Depth
- 170 m
- Intercept Depth
- 167 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT005:167-170
- Mining Method
- unknown
Location
- Easting
- 325886
- Northing
- 721838
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 64 m
- Azimuth
- 31 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold at the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, at cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.10”
Context: 3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT006Todi · goldGrade: 0.91Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- BBT006
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.91
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 142 m
- To
- 143 m
- Hole Depth
- 155 m
- Intercept Depth
- 142 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT006:142-143
- Mining Method
- unknown
Location
- Easting
- 325355
- Northing
- 721925
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 52 m
- Azimuth
- 0 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, moderate-grade intercept. Its materiality is limited by its narrow width.
Positive factors
- Moderate gold grade.
Negative factors
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“0.91”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 1.68Grade Unit: g/tIntercept: 1 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 1.68
- Grade Unit
- g/t
- Intercept
- 1 m
- From
- 9 m
- To
- 10 m
- Hole Depth
- 161 m
- Intercept Depth
- 9 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:9-10
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This is a narrow, strong-grade intercept. Its materiality is limited by its narrow width.
Positive factors
- Strong gold grade.
Negative factors
- Very narrow intercept width.
- Apparent width only, true thickness unknown.
Evidence · table
“1.68”
Context: 1
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.1Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.1
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 31 m
- To
- 34 m
- Hole Depth
- 161 m
- Intercept Depth
- 31 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:31-34
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold at the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, at cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.10”
Context: 3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.13Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 43 m
- To
- 45 m
- Hole Depth
- 161 m
- Intercept Depth
- 43 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:43-45
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.12Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 54 m
- To
- 56 m
- Hole Depth
- 161 m
- Intercept Depth
- 54 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:54-56
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.12”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.13Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 79 m
- To
- 82 m
- Hole Depth
- 161 m
- Intercept Depth
- 79 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:79-82
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.12Grade Unit: g/tIntercept: 5 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.12
- Grade Unit
- g/t
- Intercept
- 5 m
- From
- 85 m
- To
- 90 m
- Hole Depth
- 161 m
- Intercept Depth
- 85 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:85-90
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.12”
Context: 5
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.17Grade Unit: g/tIntercept: 15 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.17
- Grade Unit
- g/t
- Intercept
- 15 m
- From
- 104 m
- To
- 119 m
- Hole Depth
- 161 m
- Intercept Depth
- 104 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:104-119
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a moderate width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.17”
Context: 15
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.15Grade Unit: g/tIntercept: 3 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.15
- Grade Unit
- g/t
- Intercept
- 3 m
- From
- 123 m
- To
- 126 m
- Hole Depth
- 161 m
- Intercept Depth
- 123 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:123-126
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.15”
Context: 3
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.13Grade Unit: g/tIntercept: 2 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 2 m
- From
- 138 m
- To
- 140 m
- Hole Depth
- 161 m
- Intercept Depth
- 138 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:138-140
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a narrow width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 2
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
BBT007Todi · goldGrade: 0.13Grade Unit: g/tIntercept: 17 mView all detailsHide details
Identity
- Hole ID
- BBT007
- Project
- Todi
- Commodity
- gold
- Region
- liberia
- Reported Region
- liberia
- Ticker
- ZAU
Geometry
- Grade
- 0.13
- Grade Unit
- g/t
- Intercept
- 17 m
- From
- 145 m
- To
- 162 m
- Hole Depth
- 161 m
- Intercept Depth
- 145 m
Classification
- Deposit Type
- orogenic
- Program
- mixed
- Sample Type
- channel
- Group ID
- BBT007:145-162
- Mining Method
- unknown
Location
- Easting
- 325708
- Northing
- 722210
- CRS
- UTM WGS84, 29N
- EPSG
- 32629
- Elevation
- 59 m
- Azimuth
- 40 °
- Dip
- 0 °
- Loc. Confidence
- high
- Loc. Source
- document
QA/QC
- Laboratory
- ALS Geochemistry
- QA/QC Disclosed
- Yes
- Lab Certified
- Yes
- QP Signed
- Yes
- QA/QC Methods
- blanks, duplicates
Compositing
- Cutoff Grade
- 0.1
- Cutoff Unit
- g/t
- Max Dilution
- 2 m
Review
- Needs Review
- No
- Interp. Status
- scored
- Historical
- No
Dates
- Event date
- 2026-04-20T00:00:00.000Z
Reasoning: This intercept shows low-grade gold near the stated cutoff over a moderate width. It is a new result but not particularly material.
Negative factors
- Low gold grade, near cutoff.
- Apparent width only, true thickness unknown.
Evidence · table
“0.13”
Context: 17
Tags used in scoring
Apparent Width Onlynegative
Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Why it applies: Interval given as downhole width with no true width or drill orientation — apparent width may overstate true thickness.
Evidence · text
“intervals are sampled lengths rather than true thicknesses”
QA/QC Disclosedpositive
Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Why it applies: Release includes QA/QC disclosure — certified lab, QP sign-off, or stated methods (blanks, standards, duplicates).
Evidence · text
“QA/QC procedures included the addition of blank and duplicate samples to the sample sequence, all of which returned acceptable results. All samples met the standards for chain of custody without the opportunity for third party access from Zodiac Gold's exploration camp to the Liberia Geochemical Services Inc. sample preparation laboratory in Monrovia, Liberia. Each sample was dried and then crushed to 70% passing -2mm and a representative 1kg split was taken by riffle splitting. The split was then pulverized to 85% passing -75 micron and approximately 200g was bagged and labelled, with the remainder being returned to Zodiac Gold. Analysis was performed by 50g fire assay with an atomic absorption finish (method Au-AA26) at the ALS Geochemistry laboratory in Kumasi, Ghana. ALS Geochemistry is independent of Zodiac Gold and is accredited for method Au-AA26. Qualified Person Tom Dowrick, Director of Exploration at Zodiac Gold, is a Chartered Geologist of the Geological Society of London and a Qualified Person as defined by NI 43-101. He has reviewed and approved the technical and scientific information contained in this release.”
Compositing Transparentpositive
Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Why it applies: Cut-off grade and internal dilution rules are clearly stated for reported intervals.
Evidence · text
“significant intersections have been determined as intervals above 0.1 g/t Au with a minimum length of 2m and a maximum of 2m of consecutive samples below 0.1 g/t Au”
Infill Drillingneutral
Confirmatory drilling to raise resource confidence, not new discovery.
Why it applies: drill_program_type is "mixed"
Nearology Playneutral
Value premise rests on proximity to a known deposit rather than own results.
Why it applies: proximity is offered as the value premise: "The Ben Ben target, located 1.3km along strike from the Company's Arthington Discovery, lies within a 16km gold-in-soil "
How Atlas produces this analysis
Minestarters Atlas uses automated extraction to summarize mining announcements, identify reported measurements, and classify supporting evidence. Sentiment reflects the extracted narrative and classification rules; it is an interpretation, not a reported measurement. Evidence quotes and context are provided where available. Missing data, low-confidence results, and review flags indicate limitations. Check the original publisher announcement before relying on an interpretation.